Laboratory Equipment

Apparatus for Photosynthesis (Product Code: SCL102/1.1) is a panel-mounted apparatus for measuring and collecting the gas given off by aquatic plants during photosynthesis. The gas collects in a calibrated capillary tube, where its volume is read, and can then be drawn off with plastic syringes for further testing. Biology teachers use it as a quantitative photosynthesis experiment kit India schools and colleges can run at the bench. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

Place a healthy sprig of pondweed in water in the apparatus, allow it to settle in the light, and then measure how far the gas bubble moves along the calibrated capillary tube in a fixed time. Repeating the reading with the lamp at different distances, with coloured filters, or with water at different temperatures turns the apparatus into a proper rate investigation, giving students real data to graph instead of bubble counts.

Once enough gas has collected, draw it off with one of the plastic syringes to test it, for example with a glowing splint. As a piece of plant biology lab equipment it also supports discussion of limiting factors and experimental control: keep the plant, water volume and timing the same, change one factor at a time, and let the plant re-acclimatise for a few minutes after each change before taking readings.

Manufacturer

The apparatus is manufactured by Jain Scientific Equipments Private Limited, a science-education company in Ambala, Haryana, that trades under the ScienceLab name. Jain Scientific Equipments Private Limited is registered as an MSME manufacturing enterprise (UDYAM-HR-01-0003714) and holds Importer-Exporter Code AAECJ8618A for international consignments. See our company profile for more.

Related Laboratory Equipment

These catalogue items support photosynthesis teaching alongside this apparatus:

• Kit for Photosynthesis Experiments — a kit for running further photosynthesis experiments.
• Apparatus for Photosynthesis 1 — an alternative apparatus design for the same topic.
• Photosynthesis Apparatus — another option from our botany range.
• Laboratory Thermometer — monitors water temperature when testing its effect on rate.
• Prepared Microscope Slide Set – Photosynthesis and Adaptations — links the gas data to leaf structure under the microscope.

Browse the full Laboratory Equipment category for more biology apparatus.

Frequently Asked Questions

How is the gas volume measured?
The gas collects in a calibrated capillary tube, so students read the volume directly from the scale rather than counting bubbles.

Can the collected gas be tested?
Yes. The plastic syringes are used to draw off the gas for analysis, such as a simple test for oxygen.

Is the plant material supplied?
Plant material is not listed with the apparatus. Use fresh pondweed or another submerged aquatic plant obtained locally for each practical.

How big is the apparatus?
The listed sizes are approximately 7.5" wide by 6" tall for the apparatus (about 7" overall height), vessels of about 1" diameter, and a stand approximately 4.75" tall, 8.5" wide and 4.5" long.

How should the apparatus be cleaned after use?
Empty and rinse the vessels and capillary with clean water, flush the syringes, and let all parts dry before storage to prevent algae growth.

Do you supply it to schools abroad?
Yes. Quote the product code SCL102/1.1 and the quantity; we supply institutions across India and international markets.

Request a Quote

Request a price for the Apparatus for Photosynthesis through our contact page, or add it to the enquiry cart with any other biology apparatus you need.

Last updated: 24 September 2026

Retro Projector (Product Code: SCL108/1.2) is a classroom projector with a heavy sand-cast base, manual focus and an adjustable vertical projection angle, taking HDMI and AV sources as well as wireless mirroring from a mobile phone or tablet. A built-in independent speaker with a rotary volume knob means a teacher can show a video or a live phone screen without extra equipment, making it a practical piece of smart lab equipment school India classrooms can share. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

Set the projector on a stable desk between 1.5 and 3.5 m from the wall or screen, tilt the head to the required angle and lock it with the rotating button, then turn the focus by hand until text is sharp at the back of the room. Teachers typically connect a laptop by HDMI for slides, an older player by AV, or simply mirror a phone to show a demonstration, a microscope image photographed on a mobile, or a short experiment video to the whole class.

In lab equipment for college India departments and schools alike, a movable projector is useful where fixed classroom displays are not available, such as the laboratory itself or a shared seminar room. Watch the panel display during long sessions, keep the cooling vents clear, and let the unit cool before packing it away so that the lamp and electronics last longer.

Manufacturer

Jain Scientific Equipments Private Limited, an Ambala, Haryana supplier of educational apparatus that trades as ScienceLab, manufactures this projector for classroom and laboratory teaching. Read more on the company profile.

Related Laboratory Equipment

These catalogue items also help a teacher present material to the whole class:

• Screen Projection Microscope — projects a specimen image so the whole group can view it at once.
• Periodic Table of Chemical Elements chart — a permanent wall reference that needs no power.
• Electromagnetic Spectrum Chart — a wall chart to keep beside projected physics lessons.

Explore the Laboratory Equipment category for more teaching aids.

Frequently Asked Questions

What can I connect to the projector?
HDMI and AV sources, switched manually, plus wireless mirroring from a mobile phone or tablet.

How far from the screen should it be placed?
The design projection distance is 1.5–3.5 m; use the manual focus to sharpen the picture at your chosen distance.

Does it have built-in sound?
Yes. It has an independent speaker with stereo sound and a 3-grade rotary volume knob.

What power supply and lamp does it use?
It runs on AC110/220V, 60/50Hz, rated 350W, and the lamp is listed as a 24V halogen lamp. Ask us about spare lamps through the contact page.

How should I look after it?
Keep the vents unobstructed, clean the glass lens only with a soft lens cloth, and allow the projector to cool before moving or storing it.

What warranty applies?
Warranty terms are given in the quotation; please confirm them with our team before ordering.

Can you supply projectors for several classrooms?
Yes. Send the product code SCL108/1.2, quantity and delivery location; we supply across India and international markets.

Request a Quote

To get a price for the Retro Projector, contact us via the contact page or add it to the enquiry cart with any other classroom equipment on your list.

Last updated: 24 September 2026

Tape (Product Code: SCL109/1.3) is a metal measuring tape for taking lengths, widths and spans from one point to another during practical work. Teachers and students use it to mark out distances for motion experiments, measure benches and apparatus, and record outdoor dimensions in geography and environmental projects. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as part of its school laboratory equipment range for institutions in India and international markets.

Key Details

Typical Use

In a physics period the tape is laid along the floor or bench to set a known distance for a trolley run, a falling-object drop or a sound-echo measurement, so students can pair a measured length with a timed reading. It is equally handy for sizing up a room before a lab layout change, checking the spacing of stands, or marking plots in the school garden for an ecology survey. As mechanics lab equipment in India goes, a simple tape remains one of the most frequently borrowed items in the prep room.

For a clean reading, set the end-clip exactly on the starting mark, run the tape straight without twists or sag, and read the value squarely from above. On a long span one student can anchor the clip against a fixed object while another reads the far end. Tape measures commonly offer a clip for hooking onto a fixed edge, a brake on steel-blade types that locks the blade, or a side crank on longer cloth tapes; ask us which of these features the current version of this item carries.

Manufacturer

This tape is manufactured by Jain Scientific Equipments Private Limited, a company that sells under the ScienceLab name from Ambala, Haryana, India. Schools, colleges and distributors can read about the company's background and product lines on our company profile page.

Related Laboratory Equipment

Items often ordered alongside a measuring tape for practical measurement work:

• Tape Meter — another tape listing in the same range, useful when comparing options
• Fiberglass Tape Measure — a non-metal alternative for outdoor measuring
• Metal Ruler — for short, precise lengths on the bench where a tape is awkward
• Measuring Tape — a physics-lab measuring tape for groups needing extra units
• Compass — pairs with a tape for simple direction-and-distance mapping of school grounds

See the complete Laboratory Equipment category for more general-purpose school apparatus.

Frequently Asked Questions

What is this tape made of?
It is listed as a metal tape. The blade length and graduation style are not stated in our current product details, so contact us for these before ordering.

How do I measure a long span on my own?
Anchor the end-clip on a fixed edge or object at the starting point, then walk the tape out to the far point and read it there. Keep the tape taut and straight for a true reading.

Does it have a blade lock or a rewind crank?
Not confirmed for this item. Locking brakes are common on steel-blade tapes and cranks on longer cloth tapes; we will confirm the exact features of the version we supply on request.

How should the tape be cared for?
Wipe off dust or moisture after outdoor use, let it dry before winding back, and avoid bending or kinking the tape so that the markings stay readable.

Is a calibration certificate available?
Please discuss calibration documentation with our team when you enquire; we will tell you what can be provided for this item.

What should an institutional quotation request include?
Mention the product name and code (SCL109/1.3), the quantity, the delivery location and any tender format you need. We supply schools and distributors in India and international markets.

Request a Quote

For pricing, quantities or delivery timelines, contact our team, or add this item to the enquiry cart together with the rest of your lab list.

Last updated: 24 September 2026

Compass. (Product Code: SCL111/1.4) is a 50 mm diameter magnetic compass for general laboratory use. Its magnetised needle, usually marked at the North end, swings freely to line up with the Earth's magnetic field, so students can read direction against a dial showing the cardinal points. Physics teachers use it for magnetism lessons and geography staff for basic direction-finding, making it a staple item of school physics lab equipment in India. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

In the physics lab the compass is placed at different positions around a bar magnet or a current-carrying wire to show how the needle turns with the local field, which helps students see that a magnetic field has direction as well as strength. Laid flat on the bench away from other magnets, it also demonstrates that a freely pivoted magnet settles along the north–south line. Used together with a bar magnet, a staple of school magnetism practicals in India, it also lets a class check which end of an unmarked magnet is its north pole.

Outdoors, the same instrument introduces map orientation: students hold it level, let the needle settle, turn the body until North on the dial meets the needle, and then read off the direction of a landmark. A short history note fits well here too — the magnetic compass greatly improved the safety and efficiency of travel, especially at sea. Keep it away from steel furniture, loudspeakers and live wiring during readings, since these pull the needle off true magnetic north.

Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited produces and sells teaching apparatus from its base in Ambala, Haryana. You can learn more about the company, its manufacturing work and its range on the company profile.

Related Laboratory Equipment

Apparatus that fits naturally into the same magnetism or direction-finding lesson:

• Bar Magnet (Plastic) — the usual magnet for tracing field direction with a compass
• Steel Horseshoe Magnet — lets students compare the field between two close poles
• Plotting Compass, Single Glass Face — a plotting compass for marking field-line paths on paper
• Compass 1 — a further compass listing in the same range for larger class orders
• Tape — measures distances between landmarks during outdoor orientation work

More general teaching apparatus is listed in our Laboratory Equipment category.

Frequently Asked Questions

What size is the compass?
It has a 50 mm diameter, large enough for a small group to read the dial together on the bench.

What is the case made of?
The needle is mounted in an aluminium case with a glass top; the listing also describes the construction as aluminium ply type, 18 mm, with glass on both sides. Contact us if you need a photograph or drawing of the current version.

Why does my needle point the wrong way indoors?
Nearby iron or steel, magnets and electrical cables distort the local field. Move the compass clear of them and keep it level so the needle can swing freely.

Can it be used to show magnetic field direction around a magnet?
Yes. Placing it at several points around a magnet shows how the needle turns with the field; for drawing detailed field lines on paper a smaller plotting compass is easier to move step by step.

How should it be stored?
Store it flat, away from strong magnets, so the needle does not stay pressed against one side and the glass is not scratched.

Do you supply compasses in class quantities?
Yes, we quote for schools, colleges and distributors across India and international markets; share your quantity and delivery location when you enquire.

Request a Quote

To request pricing or availability, send us an enquiry or add the compass to your enquiry cart with any other items you need.

Last updated: 24 September 2026

Insect Catch Set (Product Code: SCL113/1.5) is a hand-held insect-catching net built from a polyester net on a metal circle, held on plastic sticks. It lets students sweep flying insects out of the air or off vegetation so they can be examined up close and then released. Biology teachers, eco-club coordinators and field-trip leaders use it for nature walks and habitat surveys, and it fits neatly into an insect collection kit for school outdoor work. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Key Details

Typical Use

On a school-ground survey, students sweep the net in a smooth arc through grass or flowering shrubs, then flip the frame over so the net bag folds across the metal circle and traps the catch. Butterflies, bees, flies and grasshoppers can then be transferred into a ventilated viewing container, sketched, counted and identified before being released where they were found. This makes the set a practical piece of zoology lab equipment in India for lessons on biodiversity, food chains and insect body plans.

Work in pairs so one student holds the net closed while the other positions the container. Sweep gently to avoid damaging wings, and avoid stinging insects unless a teacher is handling them. After use, shake out plant debris, let the polyester net dry fully and store the set so that the metal circle is not bent out of shape.

Manufacturer

The Insect Catch Set comes from Jain Scientific Equipments Private Limited, which runs its ScienceLab brand out of Ambala, Haryana, and makes apparatus for school and college science departments. Purchase and tender teams that need vendor registration details can use GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. More about the company is on our company profile.

Related Laboratory Equipment

Useful companions for collecting and studying the insects you catch:

• Plastic Container — a magnifier-lid container with breathing holes for holding live catches
• Centered Magnifier for Insects — for close viewing of a single specimen
• Hand Magnifier — a pocketable lens for checking legs, wings and antennae in the field
• Insect Net, Economy — an alternative net when equipping a larger group
• Insect Mount Set — for teachers who prepare specimens for a permanent class collection

Explore further items in the Laboratory Equipment category.

Frequently Asked Questions

What materials is the set made from?
A polyester net on a metal circle, with plastic sticks as the handle.

What is the net diameter and handle length?
These dimensions are not listed in our current product details. Contact us and we will confirm them for the version we supply.

Can students catch insects without harming them?
Yes, if they sweep gently and move the catch quickly into a ventilated container. Release insects after observation, ideally at the spot where they were caught.

Is it suited to catching insects in water?
The set is described for catching flying insects. For pond or stream sampling, ask us about suitable equipment before ordering.

How should the net be cleaned and stored?
Shake out leaves and soil, rinse if muddy, dry it completely and store it where the metal circle will not be crushed.

Do you supply sets for a whole class or eco-club?
Yes. Tell us the number of sets, the product code SCL113/1.5 and the delivery location; we supply institutions in India and international markets.

Request a Quote

For a quotation, reach our sales team or place the set in the enquiry cart along with your other field-study items.

Last updated: 24 September 2026

Insect Catches (Product Code: SCL115/1.6) is an electric insect catcher that uses two high-intensity ultraviolet tubes to attract flying insects into the device, where they contact a high-voltage, electrically charged metal grid and are killed instantly. It helps keep laboratories, prep rooms, stores and similar indoor spaces clear of flies, mosquitoes and other flying bugs. Buyers who source from a laboratory equipment supplier in India can order it with their other lab items from Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, which manufactures it.

Key Details

Typical Use

Flies and mosquitoes drifting around a biology lab can land on open culture work, dissection specimens or food-science samples, and they are a nuisance during long practical sessions. Mounting this catcher on a wall or placing it on a high shelf lets the UV light draw insects away from benches, so the room stays cleaner without spraying insecticide near students and samples. It is a sensible addition during a biology lab setup for a school in India, particularly where windows are opened for ventilation.

Position the unit away from brighter competing light sources and out of the reach of students, since the grid carries high voltage. Switch it off and unplug it before emptying or brushing out the collected insects, and never push fingers or objects through the guard. This device kills insects; if you need live insects for observation or classification, use a net and a ventilated viewing container instead.

Manufacturer

Jain Scientific Equipments Private Limited manufactures this insect catcher and markets it as part of the ScienceLab range; the company operates from Ambala in Haryana, India. Read our company profile for an overview of who we are and the laboratory equipment we produce.

Related Laboratory Equipment

Other items for labs that deal with insects, whether keeping them out or studying them:

• Insect Catch Set — a hand net for catching insects alive when they are needed for study
• Plastic Container — a ventilated container with a magnifier lid for holding live insects
• Hand Magnifier — for examining insect specimens up close
• Laboratory Safety Rules — supports safe conduct in rooms where electrical devices are installed

For a wider choice, browse the Laboratory Equipment category.

Frequently Asked Questions

How does the insect catcher work?
Two high-intensity UV tubes attract flying insects into the device, and contact with the high-voltage charged metal grid kills them.

What supply voltage, wattage and coverage area does it have?
These are not listed in our current product details. Contact us with your mains supply and room size and we will confirm suitability.

Is it safe to use in a school lab?
Yes, when installed out of students' reach and handled by staff. The grid carries high voltage, so always switch off and unplug the unit before cleaning.

Can I use it to collect insects for a class study?
No. It kills the insects it attracts. For live specimens, use the Insect Catch Set with a ventilated viewing container.

Are replacement UV tubes available?
Please ask us about replacement tubes when you order, so we can confirm the correct type for this unit.

What warranty applies?
Warranty terms are confirmed with each quotation; ask our team for details for your order.

Can you supply several units for a campus?
Yes. Share the product code SCL115/1.6, quantity and delivery address; we serve institutions in India and international markets.

Request a Quote

To get a price, contact us directly or add Insect Catches to the enquiry cart with your other requirements.

Last updated: 24 September 2026

Plastic Container (Product Code: SCL117/1.7) is a bug-viewing container with an organic glass lid that carries a built-in magnifying glass, 40 mm to 60 mm in diameter, at 3x or 5x magnification. Holes let the insects inside breathe, so children can watch a live beetle, ant or caterpillar at close range and release it afterwards. Primary teachers, nature clubs and biology departments use it for outdoor exploration, and it is a popular piece of biology teaching aids in India. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

After a sweep with a net or a gentle scoop from a leaf, the insect goes into the container and the lid is closed. Looking down through the magnifying lid, pupils can count legs and body segments, note wing veins and antennae, and sketch what they see without handling the animal. Because the creature stays alive and visible, the container suits lessons on insect body parts, life cycles and habitats, and it slots easily into an insect collection kit for school field days.

Keep each insect in the container only for as long as the observation takes, out of direct sun, and release it where it was found. Choose the 3x version for younger learners who want a wider view, and the 5x version when older students need finer detail. Clean the organic glass lid with a soft, damp cloth rather than abrasive pads so that the lens stays clear.

Manufacturer

This viewing container is produced by Jain Scientific Equipments Private Limited under its trade name ScienceLab, with operations in Ambala, Haryana. The company profile gives a fuller picture of our manufacturing and the institutions we serve.

Related Laboratory Equipment

Items used in the same catch-observe-release activity:

• Insect Catch Set — a polyester net for catching the insects that go into the container
• Plastic Container with a Magnifying Glass Lid for Collecting Insects — a related collecting container listing for comparison
• Centered Magnifier for Insects — another way to view a single specimen closely
• Hand Magnifier — for looking at insects on plants before collecting them
• Insect Anatomy Slide Set of 9 — follows up field viewing with microscope study of insect parts

Browse more classroom apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What magnification does the lid give?
The magnifying glass is offered at 3x or 5x. Please state which you need when you enquire.

How large is the magnifying lens?
The lens diameter is listed in the range of 40 mm to 60 mm; we will confirm the exact size of the version you order.

Can insects breathe inside?
Yes, the container has holes so that insects can breathe during observation. Keep them in shade and release them after the activity.

What are the container's volume and dimensions?
These are not given in our current product details. Contact us for the measurements.

How do I keep the lid lens clear?
Wipe it with a soft, damp cloth and let it air-dry. Avoid scouring pads and harsh solvents, which can mark the organic glass.

Is it suitable for young children?
It is designed for exploring nature and is widely used with younger pupils under adult supervision.

Can I order a class set?
Yes. Send the product code SCL117/1.7, the magnification required, quantity and delivery location; we supply India and international markets.

Request a Quote

For prices and lead times, get in touch or add the container to your enquiry cart.

Last updated: 24 September 2026

Hand Magnifier (Product Code: SCL119/1.8) is a general-purpose magnifier listed at 2x and 3x magnification, commonly used as an inspection tool and as a reading aid. Its lens swivels out of a protective case, and the case then doubles as the handle. The lens is break-resistant, made of optical-grade acrylic, which suits busy classrooms where glass lenses get dropped. Science teachers looking for a hand lens magnifier for school in India can order it from Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, the maker.

Specifications

Typical Use

Students hold the magnifier close to the eye and bring the object towards the lens until it comes into focus, then examine the texture of leaves, the grains in a rock or soil sample, the veins on an insect wing or the print quality on a label. Because the magnification is modest, the field of view stays wide and steady, which makes it a good first optical tool before children move on to a microscope. It is equally useful in the prep room for checking small markings on glassware and scales.

As a magnifier loupe in an Indian lab or classroom, it is easy to hand out and collect: the lens folds back into its case after use, which protects the acrylic surface from scratches in a drawer or pocket. Wipe the lens with a soft cloth only, since abrasive tissue can dull acrylic over time.

Manufacturer

The Hand Magnifier is made by Jain Scientific Equipments Private Limited, known to customers as ScienceLab and located in Ambala, Haryana. For background on our manufacturing and the range we offer schools and colleges, see the company profile.

Related Laboratory Equipment

Items commonly used with a hand magnifier during observation work:

• Pocket Magnifier — an alternative compact magnifier for field kits
• Hand Lens — another hand-held lens option for biology practicals
• Plastic Container — holds a live insect still while it is studied through a lens
• Insect Catch Set — collects the specimens students examine outdoors
• Microfiber Lens Cloth — a soft cloth for cleaning the acrylic lens

See more in our Laboratory Equipment category.

Frequently Asked Questions

What magnification does it offer?
It is listed at 2x and 3x. Please tell us which magnification you need when you enquire so we can confirm the version supplied.

Is the lens made of glass?
No. It is optical-grade acrylic and break-resistant, which makes it better suited to young students than a glass lens.

How is the lens protected when not in use?
It swivels back into its protective case, which covers the lens and also acts as the handle when opened.

What is the lens diameter?
The lens size is not stated in our current product details; contact us and we will confirm it.

When should a class use this instead of a microscope?
Use the magnifier for whole objects such as leaves, insects, rocks and printed text. Cells and tissues need the higher magnification of a compound microscope.

Can I order magnifiers for every student?
Yes. Give us the product code SCL119/1.8, the quantity and delivery location; we supply schools and distributors in India and international markets.

Request a Quote

To request pricing, write to us or add the Hand Magnifier to the enquiry cart.

Last updated: 24 September 2026

Air Thermometer (Product Code: SCL121/1.9) is a reusable glass thermometer with an alcohol fill and a 0–40°C range, intended for reading the temperature of air in a room, greenhouse corner or outdoor shade. The narrow range spreads everyday ambient temperatures across the whole scale, so small changes through the day are easy to see. It is listed for chemical laboratory application and is a handy piece of thermometry apparatus in India for school science rooms. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

A class can hang the thermometer in the lab, in a corridor and outside in the shade, then log readings at fixed times to plot how air temperature rises and falls over a day or a week. It also serves as the room-temperature reference for chemistry practicals such as reaction-rate or solubility work, where the starting temperature should be recorded alongside results. For weather-study projects it pairs well with a humidity reading, giving pupils two variables to compare.

For a true air reading, keep the bulb out of direct sunlight and away from heaters, lamps or open windows, and allow a few minutes for the column to settle before reading at eye level. It is built for air rather than immersion work, so keep it out of hot liquids beyond its 40°C upper limit; among school chemistry lab equipment in India it serves as the room-temperature reference, while a wider-range thermometer handles heating.

Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, an Ambala, Haryana company incorporated under CIN U29309HR2020PTC087597. It manufactures at its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414). Read more on our company profile.

Related Laboratory Equipment

Instruments that work alongside an air thermometer in weather and room-condition studies:

• Laboratory Thermometer — a -10 to 110°C glass thermometer for heating and cooling liquids
• Digital Hygrometer - Thermometer — adds a humidity reading next to air temperature
• Psychrometer (with Thermometer) — for wet-and-dry humidity studies
• Indoor/Outdoor Thermometer — compares inside and outside temperatures at once
• Air Thermometer 1 — another air thermometer listing in the same range

Find more apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What temperature range does it cover?
0 to 40°C, which suits room, greenhouse and outdoor air readings.

What liquid does it use?
It is an alcohol thermometer in a glass body.

Can it be used to measure boiling water?
No. Its scale stops at 40°C. For heating experiments choose a laboratory thermometer with a higher range.

What is the scale division and overall length?
These are not stated in our current product details. Contact us and we will confirm them.

Is a calibration certificate available?
Please discuss calibration documentation with us when enquiring; we will advise what can be provided for this thermometer.

Is it reusable?
Yes. Store it in its case or a padded rack, as the glass stem can break if dropped.

What do you need for a bulk quotation?
The product code SCL121/1.9, quantity, delivery location and any tender format. We supply India and international markets.

Request a Quote

For prices and delivery, contact us or add this thermometer to the enquiry cart.

Last updated: 24 September 2026

Laboratory Thermometer (Product Code: SCL123/1.10) is a reusable glass alcohol thermometer that reads from -10 to 110°C, covering the temperatures met in most school heating, cooling and mixing experiments. It is listed for chemical laboratory application and is used by students and lab assistants to follow the temperature of water, solutions and mixtures as they are warmed or cooled. As part of chemistry lab equipment in India, it is supplied to schools and colleges by its maker, Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

The range runs from just below the freezing point of water to just above its normal boiling point, so one thermometer can follow a heating curve of water from ice to boiling, track the cooling of a hot liquid for a cooling-curve graph, or monitor a water bath during an enzyme or solubility experiment. Chemistry groups also use it to record temperature change during dissolving and neutralisation reactions, where a rise or fall of a few degrees tells students whether the process is exothermic or endothermic.

Clamp the thermometer so the bulb sits in the liquid without touching the bottom or sides of the beaker, stir gently, and read the column at eye level to avoid parallax error. Never heat the thermometer directly in a flame. Laboratories that order from a chemistry lab instruments supplier usually keep a thermometer clamp or holder on each bench for this reason.

Manufacturer

Jain Scientific Equipments Private Limited produces this thermometer under the ScienceLab brand at Ambala in Haryana, India, for educational and general laboratories. Details of our background and product families are on the company profile.

Related Laboratory Equipment

Bench items used with a laboratory thermometer in heating and cooling practicals:

• Thermometer Clamp — holds the thermometer at the right depth in a beaker or flask
• Alloy Test Tube and Thermometer Holder — supports the thermometer during test-tube work
• Glass Beaker — the vessel for water baths and heating curves
• Laboratory Stand with Accessories — a stand to mount the clamp and apparatus
• Air Thermometer — a 0–40°C thermometer for room-temperature readings

See the wider Laboratory Equipment category for more apparatus.

Frequently Asked Questions

What range does this thermometer read?
From -10 to 110°C, enough for ice-water, room-temperature and boiling-water experiments.

Is it a mercury or an alcohol thermometer?
It is listed as an alcohol thermometer with a glass body.

What are the scale divisions and immersion depth?
These details are not stated in our current product information. Contact us and we will confirm them for the version supplied.

How do I get an accurate reading?
Keep the bulb fully in the liquid, clear of the container walls, stir, wait for the column to stop moving and read at eye level.

What should I do if a thermometer breaks?
Collect the glass with a brush and pan rather than bare hands, wipe up the liquid and dispose of the pieces in a broken-glass bin.

Is a calibration certificate available?
Please raise calibration documentation with our team when you enquire; we will explain what can be offered.

Can you supply thermometers in bulk?
Yes. Send the product code SCL123/1.10, quantity and delivery address; we supply India and international markets.

Request a Quote

For a price, contact our sales desk or add this thermometer to the enquiry cart with your other bench items.

Last updated: 24 September 2026

Biological Microscope (Product Code: SCL125/1.11) is a compound microscope that magnifies over 400 times, fitted with an ocular (eyepiece), three objectives and a light for illuminating the specimen. It lets students move from whole-leaf and insect observation to cells, tissues and micro-organisms on prepared or freshly mounted slides. Schools comparing a compound microscope in India for biology practicals can order it directly from Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, which manufactures it.

Specifications

Typical Use

A compound microscope has two sets of lenses: the ocular that you look through and the objective near the specimen. Total magnification is the ocular power multiplied by the objective power — for example, a 10X ocular with a 4X objective gives 40X. Students start on the low power objective to find and centre the specimen, then rotate the turret to higher powers to see detail such as onion-skin cells, cheek cells, stomata or pond organisms. This makes it a core item of biology lab equipment supplied in India for secondary and senior classes.

A useful class exercise is measuring the field of view: place a transparent metric ruler under the low power objective, focus on the scale and read the diameter of the visible circle in millimetres. At high power the field is often too small to measure directly, which demonstrates that the higher the magnification, the smaller the field of view. Always focus upwards away from the slide at high power, cover the instrument after use and carry it with one hand under the base.

Manufacturer

This microscope is manufactured by Jain Scientific Equipments Private Limited, whose products carry the ScienceLab name; the business is based in Ambala, Haryana. To learn more about our work with schools, colleges and distributors, visit the company profile.

Related Laboratory Equipment

Slides, consumables and care items used at the microscope bench:

• Lama — ground-edge glass slides, 25.4 x 76.2 mm, for mounting specimens
• Lamela — 20 x 20 mm borosilicate cover slips for wet mounts
• Series of Microscopic Preparation for The Construction of Plant — 10 prepared plant slides to view
• Series of Microscopic Preparation for Human Histology — 10 prepared human tissue slides
• Lens Tissue — for cleaning the ocular and objectives safely

Browse further items in the Laboratory Equipment category.

Frequently Asked Questions

What is the maximum magnification?
The microscope magnifies over 400 times. Total magnification is always the ocular power multiplied by the objective in use.

How many objectives does it have, and what are their powers?
It has three objectives on a rotating turret. The individual objective and eyepiece powers are not listed in our current details; contact us for the full configuration.

What type of light source is fitted?
The microscope is supplied with light for illuminating the specimen. We will confirm the lamp type and power supply on request.

How do students measure the field of view?
Place a transparent metric ruler under the low power objective, focus on the scale and read the diameter of the visible circle in millimetres.

How should the lenses be cleaned?
Blow off dust first, then wipe gently with lens tissue. Avoid ordinary paper or cloth, which can scratch the lens surfaces.

Is a calibration certificate or warranty provided?
Calibration documentation and warranty terms are discussed with each quotation; please ask our team.

Can you equip a whole biology lab?
Yes. Tell us the product code SCL125/1.11, the number of microscopes and the delivery location; we supply India and international markets.

Request a Quote

To receive a quotation, contact us or add the microscope to your enquiry cart together with slides and cover slips.

Last updated: 24 September 2026

Tava Dissection (Product Code: SCL127/1.12) is a rectangular stainless steel dissection tray measuring 30 x 25 cm, silver in colour and chemical resistant. It gives students a contained, easy-to-clean surface on which to lay out specimens and instruments during biology and zoology practicals, keeping fluids and tissue off the bench. For schools and colleges searching for a dissection tray for school use in India, it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

The tray is the working base for flower, seed, fish or organ dissections in school and college biology. A 30 x 25 cm surface leaves room for the specimen in the centre with scissors, forceps and a scalpel laid along one side, so a pair of students can share one station without crowding. Working on the tray rather than directly on the bench helps contain juices and rinse water, which makes clean-up quicker between classes.

Because the tray is stainless steel with chemical resistance, it can be washed with detergent and warm water and wiped with common lab disinfectants after each session; rinse and dry it before stacking to keep the surface bright. When planning zoology lab equipment in India, departments commonly allow one tray per student pair or small group.

Manufacturer

Jain Scientific Equipments Private Limited makes the Tava Dissection tray and sells it through its ScienceLab brand from Ambala, Haryana. More about the company can be found on the company profile page.

Related Laboratory Equipment

Instruments and aids that are used on the tray during a dissection:

• Complete Dissections — a student dissection kit of scissors, tweezers, scalpel, needle and pointer
• Scalpel, Stainless Steel — for making clean incisions on the specimen
• Forceps (Tweezers) — for lifting and holding tissue layers
• Dissecting Needle — for teasing apart fine structures
• Hand Magnifier — for a closer look at small parts during the dissection

More apparatus is listed in the Laboratory Equipment category.

Frequently Asked Questions

What size is the tray?
It measures 30 x 25 cm and is rectangular.

What is it made of?
Stainless steel with a silver finish, listed as chemical resistant.

Does it come with a wax or rubber dissecting pad?
A pad is not listed with this tray. Contact us if you need a pad or pinning surface alongside it.

How deep is the tray?
The depth is not stated in our current product details; we can confirm it on request.

How should it be cleaned after a practical?
Remove tissue, wash with detergent and warm water, disinfect if required, rinse and dry fully before storing.

What information do you need for a school order?
The product code SCL127/1.12, number of trays, delivery location and any tender paperwork. We supply India and international markets.

Request a Quote

For pricing, contact our team or add the tray to your enquiry cart with the matching instruments.

Last updated: 24 September 2026

Complete Dissections (Product Code: SCL129/1.13) is a dissection kit for students that brings together the basic surgical instruments needed for laboratory experiments — scissors, tweezers, a scalpel, a needle and a pointer — in stainless steel with a mirror finish, packed in a leather kit. It gives each student or pair a personal, organised set for plant and animal dissection practicals in schools, colleges and training labs. Offered as a dissection kit for school use in India and abroad, it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Kit contents:

• 1 large scissor
• 1 small scissor
• 2 tweezers (1 large, 1 small)
• Scalpel
• Needle
• Pointer

Typical Use

In a typical practical, students use the scalpel for the first incision, the large scissor to open body walls or cut stems, and the small scissor for fine trimming. The large tweezer lifts and holds back tissue while the small one picks out delicate parts such as stamens, ovules or blood vessels. The needle teases fibres apart and the pointer is used to show structures to the teacher or partner without touching them with fingers. This sequence suits flower, seed, earthworm and fish dissections found in a dissection set for biology in India.

Teach students to pass sharp instruments handle-first and to cut away from their hands. After each session, rinse the instruments, dry them thoroughly so the mirror finish stays bright, and return each piece to its place in the leather kit so missing items are easy to spot during a stock check.

Manufacturer

The kit is manufactured by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. The company is a registered MSME (Udyam UDYAM-HR-01-0003714), and export orders are handled under its Importer-Exporter Code AAECJ8618A issued by the DGFT. Our company profile has more background.

Related Laboratory Equipment

Items that complete a dissection workstation:

• Tava Dissection — a 30 x 25 cm stainless steel tray to work on
• Dissection Pan, Pad & Cover — a pan with pad for pinning specimens
• Dissecting T-Pins — for pinning back skin and tissue during dissection
• Microscope for Dissection — magnified viewing of small specimens while working
• Hand Magnifier — a simple lens for checking fine structures

Explore the full Laboratory Equipment category for more options.

Frequently Asked Questions

What is included in the kit?
1 large scissor, 1 small scissor, 2 tweezers (1 large and 1 small), a scalpel, a needle and a pointer, packed in a leather kit.

What are the instruments made of?
Stainless steel with a mirror finish.

Are single-use instruments available?
The product listing notes that single-use instruments may also be obtained. Contact us to discuss options for your practical.

Are spare blades or replacement instruments supplied?
Spares are not listed with the kit; ask our team about replacements when you order.

Is the kit suitable for school students?
Yes, it is designed for student lab experiments. Because it contains sharp instruments, use it under teacher supervision.

How do I keep the instruments in good condition?
Rinse after use, dry completely, and store each item in its slot in the leather kit.

Can you supply kits for a whole class or institution?
Yes. Share the product code SCL129/1.13, quantity and delivery location; we supply India and international markets.

Request a Quote

For a quotation, contact us or add the kit to the enquiry cart along with trays and pins.

Last updated: 24 September 2026

Lama (Product Code: SCL131/1.14) is a clear glass microscope slide measuring 25.4 mm x 76.2 mm, rectangular, chemical resistant and made with ground edges. It is the flat base on which specimens are mounted for viewing under a compound microscope, whether a drop of pond water, an onion epidermis peel or a stained smear. Biology and microbiology labs use slides like this every practical session, and it is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, alongside the rest of its lab glassware for buyers seeking a lab glassware supplier in India.

Specifications

Typical Use

For a temporary wet mount, students place a thin specimen in the centre of the slide, add a drop of water or stain, and lower a cover slip over it before viewing at low power. The same slides are used for blood or bacterial smears that are air-dried and stained, and for pollen, yeast or cheek-cell preparations in cell-biology lessons. Because they are chemical resistant, they tolerate the stains, alcohols and mounting fluids commonly handled in school and college labs, and they form part of any temporary slides biology kit a department puts together.

The ground edges make the slides safer to handle than raw-cut glass and less prone to chipping in a slide box. Hold slides by the edges to avoid fingerprints in the viewing area, clean them with water and a lint-free cloth before use, and label one end if several groups share specimens.

Supplier

These slides are supplied by Jain Scientific Equipments Private Limited, the Ambala, Haryana company that trades as ScienceLab and equips school and college laboratories. For more about who we are, visit our company profile.

Related Laboratory Equipment

Items used together with microscope slides at the bench:

• Lamela — 20 x 20 mm borosilicate cover slips to place over the specimen
• Biological Microscope — a microscope magnifying over 400 times for viewing mounted slides
• Microscope Slide Cover Forceps — for handling slides and cover slips without fingerprints
• Slide Box — for storing finished slides safely
• Lama 1 — a further slide listing in the same range

Find more items in the Laboratory Equipment category.

Frequently Asked Questions

What size are the slides?
25.4 mm x 76.2 mm, the common 1 x 3 inch slide format that fits standard microscope stages and slide boxes.

What does "ground edge" mean?
The edges are ground smooth after cutting, which makes the slide safer to handle and less likely to chip.

How many slides are in a pack?
Pack quantity is not stated in our current product details. Contact us with the number of slides you need.

What is the slide thickness?
Thickness is not listed at present; we will confirm it on request.

Can the slides be reused?
Slides used for temporary mounts can be washed, dried and reused if they are not scratched or chipped. Discard slides used with infectious material according to your lab's safety rules.

Do you supply slides in bulk for institutions?
Yes. Quote the product code SCL131/1.14, quantity and delivery location; we supply India and international markets.

Request a Quote

For prices, contact us or add the slides to your enquiry cart together with cover slips.

Last updated: 24 September 2026

Lamela (Product Code: SCL135/1.15) is a square microscope cover slip, 20 mm x 20 mm, made of clear borosilicate glass. Laid over a specimen on a slide, it keeps solid material pressed flat and shapes a liquid sample into a thin layer of even thickness, so the whole field comes into focus and the objective lens stays clean. Cover slips are essential equipment in any lab that uses a microscope, and this one is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, for institutions looking for a lab consumables supplier in India.

Specifications

Typical Use

To make a wet mount without trapped air, place the specimen and a drop of liquid on the slide, touch one edge of the cover slip to the drop at an angle, and lower it slowly with a needle so the liquid spreads out ahead of it. The 20 x 20 mm square covers a typical onion peel, leaf section or drop of culture comfortably on a standard slide. Stains can be drawn under the cover slip from one side with a strip of filter paper at the other, which is a handy technique for iodine or methylene blue staining. Schools stocking borosilicate laboratory glassware in India can add these cover slips to the same order as their slides.

Cover slips are thin and break easily, so pick them up by the edges or with fine forceps and keep spares in their pack until needed. Dispose of broken pieces in a glass bin rather than general waste.

Supplier

Lamela cover slips are supplied by Jain Scientific Equipments Private Limited, which operates as ScienceLab from Ambala in Haryana and provides microscopy consumables and apparatus to educational labs. Our company profile explains more about the business.

Related Laboratory Equipment

Items used with cover slips when preparing and viewing mounts:

• Lama — 25.4 x 76.2 mm ground-edge glass slides to carry the specimen
• Microscope Slide Cover Forceps — for picking up thin cover slips safely
• Biological Microscope — for viewing the finished mount at over 400 times magnification
• Glass Cover Slips, No. 1 — an alternative cover slip listing
• Lamela 1 — a further cover slip listing in the same range

See more in the Laboratory Equipment category.

Frequently Asked Questions

What size and shape are these cover slips?
They are square, 20 mm x 20 mm.

What glass are they made from?
Clear borosilicate glass.

What thickness number are they?
Thickness is not stated in our current product details. Contact us if your objective lenses need a particular thickness.

How do I avoid air bubbles under the cover slip?
Lower it at an angle from one edge of the liquid drop, using a needle to control the descent, rather than dropping it flat.

How many cover slips come in a pack?
Pack size is not listed at present; tell us the quantity you need and we will quote accordingly.

Do you supply cover slips for large institutional orders?
Yes. Quote the product code SCL135/1.15, quantity and delivery location; we serve India and international markets.

Request a Quote

To request a price, get in touch or add Lamela to the enquiry cart with your slides.

Last updated: 24 September 2026

Series of Microscopic Preparation for The Construction of Plant (Product Code: SCL140/1.16) is a set of 10 coloured microscope preparations on rectangular glass slides, arranged according to the biology programme to show how plants are built — from brown algae and sporangium development to leaf, root and flower sections and spore-bearing leaves. Teachers use the series to let students see real plant structures under the microscope rather than only in textbook diagrams. These prepared microscope slides for India and international classrooms are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Contents of the series (names as listed for the slide labels):

• Laminaria — brown algae
• Risopuz — development of sporangia
• Orizi — transverse section of leaf
• Misri — cross-section of a monocotyledon
• Sunflower — cross-section of a dicotyledon
• Misri — typical roots
• Cotton
• Lilium sythium — monocotyledon flower
• Likeni
• Fieri — spores and sporangia leaves

Typical Use

The series follows a natural teaching order. Students begin with a brown alga and a preparation showing sporangium development, move to the leaf, root and cross-sections that contrast monocotyledon and dicotyledon arrangement of tissues, and finish with a monocot flower and the spores and sporangia slide to discuss reproduction. Comparing the monocotyledon and dicotyledon cross-sections side by side is a classic way to discuss how tissue arrangement differs between the two plant groups, a core topic for botany lab equipment in India and elsewhere.

Start each slide under the low power objective to locate the tissue, then move up to higher power for cell detail, and ask students to draw and label what they see against the scientific name on the label. Keep the slides flat in a slide box away from direct sunlight and dust, and handle them by the edges so the coloured preparations are not smudged or scratched.

Supplier

This slide series is supplied by Jain Scientific Equipments Private Limited, the Ambala, Haryana company behind the ScienceLab name, which provides teaching materials and laboratory apparatus to schools and colleges. See our company profile for more about us.

Related Laboratory Equipment

Items that support microscope study of plant structure:

• Biological Microscope — magnifies over 400 times with three objectives for viewing the slides
• Series of Microscopic Preparation for Micro Organism — a companion series for micro-organism lessons
• Series of Microscopic Preparation for Human Histology — a companion series on human tissues
• Basic Botany Slide (Set of 25) — a larger botany slide set for extended courses
• Slide Box — for storing the series safely between lessons

More teaching items are available in the Laboratory Equipment category.

Frequently Asked Questions

How many slides are in the series?
The series contains 10 preparations, arranged according to the biology programme.

Which plant subjects are covered?
Brown algae, sporangium development, a leaf section, monocot and dicot cross-sections, roots, cotton, a monocot flower, Likeni, and spores and sporangia leaves, as listed above.

What language are the labels in?
Each slide is labelled with the scientific name and in Albanian. Contact us if you need labels in another language.

Are the preparations stained?
They are listed as coloured preparations. The specific stains used are not stated in our current details; ask us if you need this information.

What microscope do I need?
Any compound microscope with low and high power objectives, such as our Biological Microscope, is suitable.

Is a storage box included?
Packaging is not described in the current listing; we will confirm how the series is supplied when you enquire.

Can you supply several sets for a school or district?
Yes. Send the product code SCL140/1.16, number of sets and delivery location; we supply India and international markets.

Request a Quote

For a quotation, contact us or add this slide series to your enquiry cart.

Last updated: 24 September 2026

Series of Microscopic Preparation for Human Histology (Product Code: SCL144/1.17) is a set of 10 coloured tissue preparations on rectangular glass slides, prepared according to the 6th and 7th biology programme. It lets pupils see what human tissues actually look like under a microscope — epithelial tissue, bone, muscle, nerve, skin and sperm among them — and link those images to the organs they study in class. Schools building a microscope slides set for school use in India or abroad can obtain it from Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, which supplies it.

Specifications

Typical Use

A histology lesson usually moves from simple to complex: epithelial tissue first, to show tightly packed covering cells; then bone and muscle, to compare supporting and contracting tissues; then nerve, to show long, thin cells built for carrying signals. The human skin slide brings several tissue types together in one organ, and the sperm preparation supports lessons on reproduction and cell specialisation. Working through the series in this order helps students see how cell shape relates to function, a central idea behind biology lab equipment in India at middle-school level.

Locate each tissue under low power, then switch to high power to sketch individual cells and label features against the scientific name on the slide. Store the slides flat in a slide box, keep them out of direct sunlight so the colours last, and clean the cover glass gently with lens tissue if fingerprints appear.

Supplier

Jain Scientific Equipments Private Limited supplies this series under its ScienceLab name from Ambala, Haryana, alongside microscopes and other biology teaching materials. School and government purchase departments that need our registration details for vendor forms can quote GSTIN 06AAECJ8618A1ZT and Legal Entity Identifier 3358004HRD1JIVXKYX49. Further information is on our company profile.

Related Laboratory Equipment

Items that go with a human histology slide series in the classroom:

• Biological Microscope — magnifies over 400 times for viewing tissue detail
• Human Histology Slide Set of 25 — a larger human tissue set for senior classes
• Cross Section of Human Skin Section of Hair Follicle — extends the skin topic to hair follicle structure
• Stained Human Blood — adds blood to the tissues studied in the series
• Series of Microscopic Preparation for The Construction of Plant — a matching 10-slide series on plant structure

Browse the Laboratory Equipment category for more teaching apparatus.

Frequently Asked Questions

How many preparations are in the series?
Ten coloured preparations on glass slides.

Which tissues are included?
The series includes epithelial tissue, bone, muscle, human nerve, human skin and human sperm among its ten slides. Contact us for the complete slide-by-slide list.

Which classes is it intended for?
It is prepared according to the 6th and 7th biology programme, so it suits middle-school biology.

What language are the labels in?
Labels carry the scientific name and Albanian. Ask us if you need another label language.

What equipment is needed to view the slides?
A compound microscope with low and high power objectives and a light source, such as our Biological Microscope.

How should the slides be stored?
Flat, in a slide box, away from sunlight, heat and dust, and handled by the edges only.

What does an institutional quotation need?
The product code SCL144/1.17, number of sets, delivery location and any tender documents. We supply India and international markets.

Request a Quote

For pricing, contact our team or add the series to your enquiry cart with any microscopes you need.

Last updated: 24 September 2026

Series of Microscopic Preparation for Micro Organism (Product Code: SCL147/1.18) is a set of ten coloured prepared microscope slides that lets students observe bacteria, protozoa and simple algae under a compound microscope instead of only reading about them. Biology teachers use it for micro-organism lessons in school and college practicals, and every glass slide carries both the scientific name and the Albanian name of its specimen. The series is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

In a practical session, place the slides at a bench of compound microscopes and ask students to sketch what they see, locating each specimen at low power before moving to higher magnification for detail. The bacteria slide is ideal for comparing cell shapes, while Amoeba, Euglena and Paramecium give a clear contrast between the different ways single-celled organisms move and feed. Chlamydomonas and Spirogyra introduce green, photosynthetic micro-organisms, so one set covers several syllabus points in a single period.

Because the preparations are permanent, they are ready whenever a lesson needs them and suit schools that prefer not to culture live organisms. For teachers assembling a microscope slides set for school practicals, this series sits naturally beside its human histology and plant construction companions listed below. Hold the slides by their edges, clean the glass only with lens tissue, and return each slide to storage at the end of the class.

Supplier

This slide series is supplied by Jain Scientific Equipments Private Limited, the Ambala, Haryana company that trades under the ScienceLab name and equips school, college and university laboratories in India and international markets. Slide sets can be ordered together with the company's own teaching models and apparatus, so a single enquiry can cover an entire biology practical room. Read more about the business on the ScienceLab company profile.

Related Laboratory Equipment

Items that teachers usually order with this micro-organism slide series:

• Biological Microscope — the compound instrument needed to view the ten preparations.
• Immersion Oil, 25ml — for oil-immersion objectives when bacterial shapes are examined at the highest magnification.
• Slide Box — keeps the glass slides separated and protected between lessons.
• Series of Microscopic Preparation for Human Histology — companion slide series for human tissue topics.
• Series of Microscopic Preparation for The Construction of Plant — companion series on plant structure.

Browse the full Laboratory Equipment range for more biology practical supplies.

Frequently Asked Questions

How many slides are in the series and what do they show?
There are 10 coloured preparations on rectangular glass slides. The named preparations include bacteria of different forms, Amoeba, Euglena, Paramecium, Chlamydomonas, protozoa, Staphylococcus and Spirogyra; ask us through the contact page for the full slide-by-slide list before you order.

What language are the slide labels in?
Each preparation is labelled with its scientific name and in the Albanian language. If your institution needs different label wording, raise it when you request a quotation.

What kind of microscope is needed?
A compound biological microscope. Protozoa and algae can be studied at moderate magnification, while bacteria are easiest to see with a high-power or oil-immersion objective.

How should the slides be handled and stored?
Hold them by the edges, wipe the glass gently with lens tissue, keep solvents away from the labels, and store the slides flat in a slide box out of direct sunlight.

Is there a warranty on prepared slides?
Replacement and warranty terms for slide sets are stated in each quotation; our team will confirm the terms that apply to your order.

Can the series be ordered for several laboratories?
Yes. We supply schools, colleges and tender buyers in India and international markets; share the quantity and delivery location through the contact page and we will quote accordingly.

Request a Quote

To receive a quotation for this micro-organism slide series, send your quantity and delivery details through our contact page, or add it to the enquiry cart together with the other equipment on your list.

Last updated: 24 September 2026

Plant Cell Structure (Product Code: SLE151/1.19) is a realistic three-dimensional model that presents a plant cell as it would appear through an electron microscope, so a whole class can identify its organelles at a glance. Part of the cell wall is cut away to expose the plasma membrane, vacuoles, plastids, mitochondria and nucleus, which makes it a practical plant cell model for school and college biology lessons. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

Set the model on the demonstration bench when introducing cell biology, then use the numbered key card to quiz students on each coloured structure. Because the wall is partly removed, learners see how the rigid outer layer sits outside the plasma membrane – a point that often confuses beginners – and how much of the interior the vacuoles and plastids occupy. It is equally handy for revision before practical exams, when students compare their own onion-peel or leaf preparations under the microscope with the organised view the model provides.

Schools that stock cell biology equipment often pair this model with the animal cell version so that differences such as the cell wall and plastids can be discussed side by side. Wipe the PVC surface with a soft damp cloth and keep the key card with the model so the numbering stays usable.

Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited manufactures biology models and laboratory apparatus in Ambala, Haryana. Cell models like this one are produced for school, college and university classrooms and dispatched to buyers in India and international markets. Company background and contact points are summarised on our company profile.

Related Laboratory Equipment

These items extend a plant cell lesson from model to microscope:

• Animal Cell Structure — same-size animal cell model for plant-versus-animal comparison.
• Models of Cellular Organelles — individual organelle models for closer study.
• Series of Microscopic Preparation for The Construction of Plant — real plant tissue slides to follow the model lesson.
• Biological Microscope — for students' own onion-peel and leaf slides.
• Plant Cell Structure 1 — an alternative plant cell model in the range.

More teaching aids are listed in our Laboratory Equipment category.

Frequently Asked Questions

Which parts of the plant cell does the model show?
The plasma membrane, vacuoles, plastids, mitochondria and nucleus, revealed by removing a portion of the cell wall. All structures are colour coded and numbered against the key card.

How big is the model?
It measures 180 x 300 x 60 mm and stands on its own base, a convenient size for a teacher's bench or a display shelf.

Is it safe for students to handle?
Yes, it is made of PVC described as non-toxic. Normal classroom handling is fine; simply avoid dropping it and clean it with a damp cloth rather than solvents.

Does it come with a key?
Yes. A numbered key card is supplied with the model so each coloured structure can be identified.

Can I order the plant and animal cell models together?
Yes. Our Animal Cell Structure model has the same dimensions, and both can be quoted as a pair for comparison teaching.

What should an institutional quotation request include?
The product code SLE151/1.19, the quantity, the delivery address and any tender format you must follow. Send these through the contact page.

Request a Quote

For pricing and availability, contact ScienceLab with your requirements or place the model in the enquiry cart along with other biology items you need.

Last updated: 24 September 2026

One-Cotyledon Flower Pattern (Product Code: SCL155/1.20) is a botanical teaching model of a flower from the monocotyledon, or one-cotyledon, group of flowering plants. It gives botany classes a fixed reference for discussing how monocot flowers are organised, without waiting for fresh flowers to come into season. Produced in non-toxic PVC by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it is a useful addition to plant biology lab equipment lists for schools and colleges.

Specifications

Typical Use

Teachers bring out this model when the syllabus reaches the division of flowering plants into monocots and dicots. Ask students to describe the parts they can see and relate them to the general monocot pattern in their textbook, where floral parts are commonly arranged in threes. Setting the model next to a dicot flower model turns a descriptive lesson into a comparison exercise that students remember well.

It also prepares learners for garden or field work: once they know what to look for, they can examine real lilies, grasses or onion flowers with a hand lens and decide which group each belongs to. As part of a botany lab equipment set, keep the model on a shelf away from heat sources and dust it regularly so it stays presentable for display.

Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, produces botanical and zoological teaching models in Ambala, Haryana. Because the company also supplies microscopes, slides and charts, this flower model can travel in the same consignment as the rest of a biology room order for India and international markets. Our profile page explains more about the company.

Related Laboratory Equipment

Useful companions for a monocot and dicot lesson:

• Dicotyledonous Flower Pattern — the dicot counterpart for side-by-side comparison.
• Monocotyledonous Flower Pattern — another monocot flower model in the range.
• Monocotyledonous and Dicotyledonous Leaves, Cross Section — carries the same comparison into leaf anatomy.
• Flower Formation in Angiosperms — explains how flowers develop in flowering plants.
• Hand Magnifier — for examining real flowers after the model lesson.

See the complete Laboratory Equipment listing for further botany aids.

Frequently Asked Questions

What does “one-cotyledon” mean?
It refers to monocots, flowering plants whose seeds carry a single seed leaf. This model represents the flower pattern of that group.

What are the size and material?
The model measures 180 x 300 x 60 mm and is made of non-toxic PVC.

Does it come apart or include a labelled key?
Our listing does not specify detachable parts or a key card for this model. If either is essential for your lessons, confirm the details through the contact page before ordering.

Should I buy it together with the dicot model?
For classification lessons, yes: the pair lets students compare the two flower patterns directly, and both can be listed on one quotation.

How do I keep it clean?
Dust it with a soft brush or dry cloth, and use a slightly damp cloth for marks. Avoid solvents and hot surfaces.

Can you supply several units for a school group or tender?
Yes. Tell us the quantity, delivery location and any tender requirements, and we will prepare a quotation for India or international delivery.

Request a Quote

Request pricing for the One-Cotyledon Flower Pattern through our contact page, or add it to the enquiry cart with any other botany models you need.

Last updated: 24 September 2026

Dicotyledonous Flower Pattern (Product Code: SCL157/1.21) is a dissectible flower model that can be taken apart to show the pollen grains inside and to illustrate how pollination takes place in a dicot flower. Its important structures are numbered and matched to an identification key, so students move quickly from naming parts to explaining their role in reproduction. The model is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, for plant anatomy teaching in schools and colleges.

Specifications

Typical Use

Start with the model assembled so the class sees the complete flower, then open it to expose the pollen grains and discuss how pollen reaches the stigma during pollination. Students use the identification key to name each numbered structure and then explain, in their own words, how pollen transfer leads to fertilisation and seed formation. The sequence suits lessons on sexual reproduction in flowering plants as well as practical-exam revision.

As a plant anatomy model it also supports comparison work: stand it beside a monocot flower model and ask learners to list every difference they can observe. When reassembling, fit the parts back gently in their original positions, and keep the model on its stand in a closed cupboard so dust does not settle on the detailed surfaces.

Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), an Ambala, Haryana company that manufactures biology models and laboratory apparatus for education. Production takes place at the company's licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414), from where orders are dispatched across India and to international markets. Visit the company profile for further details.

Related Laboratory Equipment

Items that complete a lesson on flower structure and pollination:

• One-Cotyledon Flower Pattern — monocot counterpart for comparison lessons.
• Dicotyledonous Flower Pattern 1 — an alternative dicot flower model in the range.
• Flower Formation in Angiosperms — follows the flower from formation onwards.
• Biological Microscope — to observe real pollen grains once the model has been explained.

Explore more teaching models in our Laboratory Equipment category.

Frequently Asked Questions

Can the model be taken apart?
Yes. It disassembles to reveal the pollen grains inside the flower and to show the process of pollination.

How large is it and how is it displayed?
It measures 250 x 350 mm and is mounted on a stand, so it can be placed on a bench or display shelf.

Is there a key to the numbered parts?
Yes. The important structures are numbered, and each number corresponds to an identification key for self-study and revision.

What is it made of?
Three-dimensional PVC moulding coloured with non-toxic dye.

Is a warranty provided?
Warranty terms are set out in our quotation. Please ask through the contact page and we will confirm them for your order.

What information speeds up a school or tender quotation?
Quote the product code SCL157/1.21, the number of units, whether you also need the monocot model, and the delivery address or port.

Request a Quote

To order this dicot flower model, send us an enquiry or add it to the enquiry cart and submit your full list in one go.

Last updated: 24 September 2026

Animal Cell Structure (Product Code: SCL162/1.22) is a three-dimensional model that reveals the delicate internal organisation of an animal cell, from the nucleus and endoplasmic reticulum to mitochondria, centrioles, lysosomes and fat vacuoles. Biology teachers rely on it to make an abstract topic concrete when introducing cells and organelles. The model is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as part of its range of animal cell models and cell biology teaching aids.

Specifications

Typical Use

Use the model as the anchor for a first lesson on animal cells: ask students to locate the nucleus, then work outwards through the endoplasmic reticulum and mitochondria, discussing what each structure does. Centrioles and lysosomes are often just names in a textbook, so seeing them in three dimensions helps learners remember where they sit and what they are for. The fat vacuoles give a natural starting point for talking about how cells store reserves.

Afterwards, students can prepare stained cheek-cell slides and compare the limited detail visible under a light microscope with the fuller picture the model presents – a good moment to explain why electron microscopy transformed cell biology. Keep this animal cell model out of direct sun and clean it with a slightly damp cloth.

Manufacturer

Jain Scientific Equipments Private Limited operates as ScienceLab from Ambala in Haryana, producing cell, anatomy and botany models together with general laboratory apparatus. Schools, colleges and distributors in India and international markets order from one catalogue, which makes it simple to match this model with its plant cell partner. Read the ScienceLab profile to learn more about the company.

Related Laboratory Equipment

Teaching aids that build on an animal cell lesson:

• Plant Cell Structure — plant counterpart in the same size, for comparing cell walls and plastids.
• Models of Cellular Organelles — separate organelle models for detailed study.
• Cell Reproduction - Mitosis — leads on to the next topic, cell division.
• Biological Microscope — for students' own cheek-cell preparations.
• Animal Cell Structure 1 — an alternative animal cell model.

Find more cell biology items under Laboratory Equipment.

Frequently Asked Questions

Which organelles are shown on the model?
The nucleus, endoplasmic reticulum and mitochondria, along with centrioles, lysosomes and fat vacuoles and further cell features.

What are its dimensions?
180 x 300 x 60 mm, which is large enough for front-of-class demonstration.

Is the model safe for younger students?
It is made from a PVC mould finished with non-toxic dye, so it can be handled in class under normal supervision.

Is a labelled key included?
Our listing does not state a key card for this model. If you need one, mention it in your enquiry through the contact page and we will confirm what is supplied.

Can I buy it as a pair with the plant cell model?
Yes. The Plant Cell Structure model shares the same dimensions, and both can be quoted together.

Do you ship outside India?
Yes. We supply institutions in India and international markets; include your destination so the quotation covers packing and freight.

Request a Quote

Ask for a price on the Animal Cell Structure model through our enquiry form, or collect it in the enquiry cart with the rest of your biology order.

Last updated: 24 September 2026

Models of Cellular Organelles (Product Code: SCL165/1.23) are PVC teaching models that let students study cell organelles one at a time, rather than only as small shapes inside a whole-cell diagram. They are coloured with non-toxic dye and have mountable parts, so a teacher can build up or arrange the pieces as a lesson develops. The models are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, for biology teaching aids collections in schools and colleges.

Key Details

Typical Use

Organelle models make most sense once students have seen a whole-cell model. The teacher can then pick up one model at a time and examine its shape and internal features, linking the structure of each organelle to the job it performs in the cell. Because the parts are mountable, the models can be arranged on a bench or display board so the class compares several organelles in a single view.

They also lend themselves to group work: give each group one model, ask them to research its role, and let them present it to the rest of the class. To complete a cell biology equipment set, combine these models with plant and animal cell models and a microscope. Clean the PVC with a soft damp cloth and store all the parts together so none go missing.

Manufacturer

These organelle models come from Jain Scientific Equipments Private Limited, which trades as ScienceLab and is based in Ambala, Haryana. Its product line spans biology teaching models and general laboratory apparatus for classrooms in India and international markets, so this item can be quoted alongside other cell biology aids. Further information is available on the company profile page.

Related Laboratory Equipment

Pair the organelle models with these items for a complete cell biology unit:

• Cell Superstructure (with Cell Organelles) — shows the organelles in position within a whole cell.
• Animal Cell Structure — animal cell model to place each organelle in context.
• Plant Cell Structure — plant cell with plastids and vacuoles for comparison.
• DNA (Helical) Models — continues the lesson from the nucleus to genetic material.

Visit the Laboratory Equipment category for more teaching models.

Frequently Asked Questions

Which organelles are included?
Our listing describes the models as PVC with non-toxic dye and mountable parts, but does not list the individual organelles. Please confirm the exact set through the contact page before placing an order.

What are the models made of?
PVC, coloured with non-toxic dye.

What does “mountable parts” mean in practice?
The pieces can be mounted for display rather than being loose shapes only. Ask us for details of the mounting arrangement if you plan a wall or board display.

Are dimensions available?
Sizes are not published for this set. We can share them with your quotation so you can plan storage and display space.

Can the models be ordered in class quantities?
Yes. Several sets can be supplied for group work, and quantity requirements for institutions in India and international markets are handled through a single quotation.

Request a Quote

For a quotation on the Models of Cellular Organelles, write to our team or add the item to your enquiry cart.

Last updated: 24 September 2026

Anatomical Human Bust gv (Product Code: SCL174/1.24) is a standard-size male torso model, 850 mm long, that divides into 19 pieces so students can remove and study the main organs of the head, chest and abdomen. It is hand painted, carefully assembled and realistic in appearance, and it rests on a plastic seat with a PVC support. Made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it belongs to the family of human anatomical models used in school biology rooms and health-science teaching.

Specifications

Typical Use

Teachers usually begin with the torso closed, pointing out surface landmarks, then lift out the organs in the order a dissection would reveal them: lungs, heart, the trachea with oesophagus and aorta, then stomach, liver and intestine. Passing each organ round lets students judge its relative size and see how it fits against its neighbours, something charts cannot convey. The diaphragm is especially useful for explaining breathing, and the removable head sections and brain link the torso to lessons on the nervous system.

For practical tests, remove several organs and ask students to return them to the correct position. Within a human biology model set, the bust pairs naturally with a full skeleton. Keep loose pieces with the torso after class, and clean the painted surfaces with a soft, slightly damp cloth rather than solvents.

Manufacturer

The bust is produced by Jain Scientific Equipments Private Limited, known to customers by its trading name ScienceLab, which manufactures anatomy, biology and science laboratory equipment in Ambala, Haryana. Institutions in India and international markets order models like this one for biology, nursing and allied-health teaching rooms. The company profile gives an overview of the business.

Related Laboratory Equipment

Anatomy aids that complement the torso in a human biology room:

• Human Skeleton. — the skeletal framework to teach alongside the organs.
• Human Anatomical — another human anatomy model in the range.
• Human Muscles — for the muscular system that surrounds these organs.
• Series of Microscopic Preparation for Human Histology — tissue-level view of human organs under the microscope.

Browse all items in Laboratory Equipment.

Frequently Asked Questions

How many parts does the bust separate into?
19 pieces: the torso, head (2 pieces), brain, lung (4 pieces), heart, trachea with oesophagus and aorta, diaphragm, stomach, duodenum with pancreas and spleen, intestine, kidney, liver and bladder (2 pieces).

How large is the model?
It is a standard-size male torso with a length of 850 mm.

What is it made of?
Three-dimensional PVC with non-toxic dye, hand painted, and placed on a plastic seat with a PVC support.

Is an organ identification guide supplied?
Our listing does not mention a key card or guide for this bust. Ask through the contact page and we will confirm what accompanies the model.

How should the model be cleaned?
Wipe the painted surfaces with a slightly damp cloth and dry them; avoid alcohol or solvent cleaners, which can dull hand-painted detail.

What warranty applies?
Warranty cover is confirmed in writing with each quotation, so please request it along with pricing.

Can you quote for several colleges or a tender?
Yes. Send the quantity, delivery addresses and tender references, and we will prepare one consolidated quotation.

Request a Quote

Enquire about the Anatomical Human Bust gv via our contact page, or add it to the enquiry cart together with other anatomy models on your list.

Last updated: 24 September 2026

Human Skeleton (Product Code: SCL177/1.25) is a 168 cm flexible ligamentary skeleton model used to teach human bones and joints in biology, anatomy, nursing and physical education classrooms. Built in fibre glass and moulded plastic, it is complete down to the phalanges, with a moving lower jaw, hinged feet and a key card for reference. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Human Skeleton Model Used For?

At 168 cm, this skeleton shows the bones at roughly adult human height, so students can relate each bone directly to their own body. Teachers use it to name the skull, spine, ribcage, limbs, hands and feet, and to show how freely moving joints allow bending, straightening and rotation. For colleges choosing a human skeleton model in India for anatomy, nursing or sports science teaching, it serves as the central reference at the front of the class.

The flexible ligamentary build means limbs can be moved into realistic positions during a lesson. Move joints gently and within their natural range, open the folding stand fully on a level floor before a demonstration, and use the key card to check bone names during revision. Dust it with a soft, dry cloth after use.

OEM Manufacturer

This Human Skeleton is manufactured by Jain Scientific Equipments Private Limited — trading as ScienceLab — at its own licensed factory at Saha, Ambala, Haryana, India. As the OEM, the company makes and assembles the model itself, so enquiries about the stand, the key card or replacement parts are answered by the manufacturer — ask us.

ScienceLab is a registered MSME enterprise (Udyam UDYAM-HR-01-0003714), and export consignments move under Importer-Exporter Code AAECJ8618A (DGFT). Company background is on the ScienceLab profile page.

Related Laboratory Equipment

Useful alongside this skeleton in anatomy and biology teaching:

• Human Skeleton (SLE/A/01) — another Human Skeleton listing: a miniature plastic skeleton with colour-coded bones on a rod-mounted base.
• Human Muscular and Ligamentous Skeleton — a companion model for lessons on muscle and ligament attachments.
• Human Skeleton Model, Disarticulated — loose bones for examining individual bones in the hand.
• Human Skeleton Storage Case, Black Plastic — a separate storage case listing; ask us which skeleton sizes it suits.

See the wider Laboratory Equipment range.

Frequently Asked Questions

How tall is the Human Skeleton SCL177/1.25?
The Human Skeleton SCL177/1.25 is listed with a length of 168 cm, close to adult human height, and stands on a heavy metal stand that is movable and folding. Ask us to confirm packed dimensions for shipping before you order.

What is the Human Skeleton SCL177/1.25 made of?
The Human Skeleton SCL177/1.25 is made of fibre glass and moulded plastic. Every part is formed so that the joints move freely, and the skeleton is complete up to the phalanges, with a moving lower jaw and hinged feet.

What comes with the Human Skeleton SCL177/1.25?
The Human Skeleton SCL177/1.25 is supplied complete with a heavy metal stand and a key card for reference. Other accessories, such as a storage case, are separate items; ask us if you would like them quoted together.

Who manufactures the Human Skeleton SCL177/1.25?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Human Skeleton SCL177/1.25 as the OEM at its licensed factory in Saha, Ambala, Haryana, India. Buyers deal with the manufacturer directly for quotations, repeat orders and spare-part enquiries.

Is this the same as the other Human Skeleton listing?
No. The Human Skeleton SCL177/1.25 is a 168 cm flexible ligamentary model on a metal stand, while the Human Skeleton SLE/A/01 is a miniature plastic skeleton with colour-coded bones on a rod-mounted base. Quote the product code to get the right model.

How should the Human Skeleton be cleaned and stored?
Clean the Human Skeleton SCL177/1.25 with a soft, dry or slightly damp cloth and avoid solvents on the plastic parts. Keep it standing on its metal stand, away from direct sunlight and heat sources, so the joints and finish stay in good condition.

Is the Human Skeleton available for export and bulk orders?
Yes. ScienceLab supplies the Human Skeleton SCL177/1.25 to schools, medical and nursing colleges, dealers and importers in India and international markets. Send the quantity and destination through the contact page for a quotation from the manufacturer.

Request a Quote

Request pricing for the Human Skeleton (SCL177/1.25) through the contact page, or add it to the enquiry cart; the quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Comparison Model of Vertebral Limbs (Product Code: SCL179/1.26) is an enlarged relief model of the limbs of vertebrates, designed so students can compare limb structure across different animals on a single piece. It is moulded in non-toxic PVC and supports zoology and evolution lessons that explain how one basic limb plan has been adapted to very different ways of life. The model is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Key Details

Typical Use

The classic application is teaching homologous structures. Students trace the corresponding bones on each limb shown and discuss why vertebrates with very different lifestyles share a similar underlying arrangement. That discussion leads directly into evidence for evolution and common ancestry, a topic that is far easier to grasp with a physical model to point at than with a textbook diagram alone.

Because the relief is enlarged, it can be read from the back of the classroom, and it also works well as one station in a rotation practical alongside skeleton models or real bones. As a piece of zoology lab equipment it needs little care: dust it regularly and wipe it with a damp cloth when needed.

Manufacturer

Jain Scientific Equipments Private Limited produces this relief model under its ScienceLab brand in Ambala, Haryana, where the company makes zoology, botany and anatomy teaching aids alongside general laboratory apparatus. Orders from schools, colleges and distributors in India and international markets are handled directly by the company. Find out more on the company profile.

Related Laboratory Equipment

Further aids for comparative anatomy and classification lessons:

• Comparison of Limbs in Vertebrates — an alternative limb comparison model in the range.
• Comparison of the Heart in Vertebrates — applies the same comparative approach to the heart.
• Series of Teaching Model in Relief for Biology 7.B32 — relief panels on the vertebrate and invertebrate groups.
• Human Skeleton 1 — a full human skeleton for relating the human limb to other vertebrates.

See more in our Laboratory Equipment category.

Frequently Asked Questions

What does the model compare?
The limbs of vertebrates, presented as an enlarged PVC relief so their structure can be compared side by side.

Which animals are represented?
Our listing does not name the individual species. Please confirm them through the contact page if your syllabus requires specific examples.

Is it suitable for lessons on evolution?
Yes. Comparing limb bones across vertebrates is a standard way to introduce homologous structures and common ancestry.

Is the material safe for classroom handling?
The relief is made of PVC described as non-toxic, so students can handle it during lessons.

Can dimensions and mounting details be provided?
They are not published on this page. We will include them in your quotation on request.

How do we request a quotation for several schools?
Send the product code SCL179/1.26, the quantity required and the delivery locations; one quotation can cover all sites.

Request a Quote

For price and availability of the Comparison Model of Vertebral Limbs, get in touch or add it to the enquiry cart with other zoology aids.

Last updated: 24 September 2026

Series of Teaching Model in Relief for Biology 6-7-8 (Product Code: SCL185/1.27) is a set of ten raised-relief teaching panels on the human body, covering the skeleton and muscles, circulation, the nervous and digestive systems, breathing, reproduction and embryo development. Each one-sided panel measures 50 x 70 cm and is moulded in non-toxic plastic, so students can see and feel the shapes of organs instead of relying on flat diagrams. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as a human biology teaching aid for the biology 6-7-8 course the series is named after.

Specifications

Typical Use

Display the panel for the current topic beside the board and refer to it throughout the lesson. The raised surface lets students follow the path of blood around the circulation panel, or food through the digestive system, with a fingertip, which helps learners who find flat diagrams hard to read. The skeleton and muscle panels support lessons on movement, while the reproductive and embryo development panels give teachers a clear, factual visual for topics that need careful handling.

Over a school year the ten panels can rotate as a wall display in the biology room, and they are easy to take down for group work or revision. Clean the plastic with a damp cloth, and store the panels flat or upright so the relief is not pressed out of shape. Schools building a set of biology teaching aids often combine the series with three-dimensional anatomy models.

Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, manufactures relief panels, models and charts for biology classrooms. Because the company also produces laboratory apparatus, schools and education departments in India and international markets can source a whole biology room from one supplier. More about the company is on our profile.

Related Laboratory Equipment

Teaching aids that sit well alongside these relief panels:

• Series of Teaching Model in Relief for Biology 7.B32 — companion relief set on invertebrates and vertebrates.
• Biology Lesson Plan Series 7-8 — laminated charts for further human anatomy topics.
• Anatomical Human Bust gv — three-dimensional torso with removable organs.
• Human Skeleton 1 — full skeleton to extend the skeleton and skull panel.
• Series of Teaching Boards for Health Education, Environmental Protection — boards for related health topics.

Browse the wider Laboratory Equipment range.

Frequently Asked Questions

How many panels are there, and how big are they?
The series contains 10 one-sided relief panels, each 50 x 70 cm.

Which body systems are covered?
Skeleton and skull bones, muscles, blood circulation, the nervous system, digestion, the air-breathing apparatus, a panel featuring the tongue, male and female reproductive organs, and embryo development.

What are the panels made of?
Non-toxic plastic moulded in relief, so the organs stand out from the background.

In which language are the panels labelled?
The labelling language is not stated in our listing for this series. Tell us your requirement through the contact page and we will confirm it.

Can individual panels be ordered?
The series is listed as a set of ten. If you need single panels or replacements, ask us and we will advise on availability.

Do you supply education departments and tenders?
Yes. We quote for schools, education authorities and tender buyers in India and international markets; include the quantity and delivery details.

Request a Quote

To obtain a quotation for this relief series, message our team or add it to the enquiry cart along with any other biology teaching aids.

Last updated: 24 September 2026

Series of Teaching Model in Relief for Biology 7.B32 (Product Code: SCL189/1.28) is a set of ten raised-relief panels that takes students through the animal kingdom, from worms and shellfish among the invertebrates to fish, reptiles, birds and mammals among the vertebrates. The one-page panels measure 50 x 70 cm and are made of plastic finished in non-toxic colours. Made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, the series supports zoology and animal classification lessons.

Specifications

Typical Use

The series fits a unit on classification. Put up the invertebrate panels first and ask students to note the body features that define each group, then move to the vertebrate panels and compare body coverings, limbs and ways of breathing across fish, reptiles, birds and mammals. Because the outlines are raised, students can trace structures by touch, which makes the comparisons more memorable than a printed poster.

Teachers also run the panels as stations in a carousel activity: groups rotate from panel to panel, record the characteristics of each animal group and finally build a class classification chart for the biology room wall. Wipe the panels with a damp cloth and keep them away from direct heat so the colours and relief stay in good condition.

Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, manufactures this zoology relief series in Ambala, Haryana, within a wider catalogue of biology models, charts and laboratory apparatus. Schools and institutions in India and international markets can order it on its own or together with other teaching aids. The ScienceLab company profile has more background.

Related Laboratory Equipment

Aids that extend a lesson on animal groups:

• Series of Teaching Model in Relief for Biology 6-7-8 — companion relief set on human body systems.
• Comparison of the Heart in Vertebrates — compares the heart across the vertebrate groups on these panels.
• Comparison of Limbs in Vertebrates — shows how limbs differ between vertebrate groups.
• Hand Magnifier — for examining real shells, worms and other specimens.

Find more in the Laboratory Equipment category.

Frequently Asked Questions

How many panels are in the series and what size are they?
Ten one-page relief panels, each 50 x 70 cm.

Which animal groups are covered?
The listed topics are worms, shellfish, spiny-skinned animals and invertebrates in general, followed by fish, reptiles, birds and mammals.

Eight topics are listed for ten panels – what are the others?
Our listing names eight topics. Ask through the contact page for the complete panel list before you order.

Are the colours safe for students?
Yes, the plastic panels are finished in non-toxic colours.

How should the panels be looked after?
Clean them with a damp cloth, avoid solvents, and store them flat or hanging away from heat.

What should a school send to receive a quotation?
The product code SCL189/1.28, the number of sets, the delivery address and any tender reference. Warranty terms are stated in the quotation.

Request a Quote

Ask for a quotation on this zoology relief series via our contact page, or place it in the enquiry cart with other classroom aids.

Last updated: 24 September 2026

Biology Learning Table Series 6 (Product Code: SCL196/1.29) is a set of 15 coloured teaching charts on ecology and the environment, covering food chains and food pyramids, the circulation of water in nature, the biomes of the globe and the effects of acid rain. Each single-sided chart measures 70 x 100 cm on laminated plastic sheet, so it can be wiped clean and displayed year after year. The series is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, for schools assembling a biology chart set.

Specifications

Typical Use

The charts are built around ecosystems, so a teacher can move from a single habitat – the forest floor, a lake or the sea – out to the global picture of biomes and the water cycle. A productive exercise is to display the forest and lake food-network charts together and ask students to trace energy from producers to the final consumers, then construct a food pyramid from the same organisms. The chart on harmful animals opens a discussion about the role every species plays, including those people usually see as pests.

The later charts on the death of the forest and acid rain connect biology with environmental science, which makes the series a good fit for project work and environment days. Wipe the laminated sheets with a damp cloth and store them flat or rolled, never folded, so they stay crease-free.

Manufacturer

Jain Scientific Equipments Private Limited is the company behind the ScienceLab name, making biology teaching charts, models and laboratory apparatus in Ambala, Haryana for India and international markets. For institutional and tender buyers who need vendor registration details, the company's GSTIN is 06AAECJ8618A1ZT and its LEI is 3358004HRD1JIVXKYX49. See the company profile for more.

Related Laboratory Equipment

Resources that turn these ecology charts into hands-on lessons:

• Series of Teaching Boards for Health Education, Environmental Protection — boards that continue the environmental protection theme.
• Herbarium Series for the Vegetation of Albania — real plant specimens for habitat and vegetation lessons.
• Insect Catch Set — for collecting small animals during forest-floor fieldwork.
• Hand Magnifier — for close observation of leaf litter, soil animals and plants.
• Biology Learning Table Series 9 — laminated chart series on genetics and cell division.

Explore the full Laboratory Equipment category.

Frequently Asked Questions

How many charts are in the series and what size are they?
There are 15 single-sided charts, each 70 x 100 cm, laminated and in colour.

Which topics are covered?
The listed topics include life on the forest floor, food pyramids, food networks and chains in the forest, lake and sea, the circulation of water in nature, a schematic section of the globe, the biomes of the globe, the death of the forest and acid rain. Ask us for the full chart-by-chart list.

What language are the charts in?
The chart language is not specified in our listing for this series. Please confirm your requirement through the contact page.

Will the charts stand up to daily classroom use?
They are laminated plastic sheets, which can be wiped clean. Avoid folding them and keep them away from direct heat.

Can single charts be bought?
The series is listed as a set of 15. Ask us if you need individual charts or replacements.

Which vendor details can you provide for a tender file?
Our GSTIN and LEI are given above; further company documents and warranty terms are shared with the quotation on request.

Request a Quote

Request a price for Biology Learning Table Series 6 through our contact page, or add it to the enquiry cart with your other classroom requirements.

Last updated: 24 September 2026

Biology Lesson Plan Series 7-8 (Product Code: SCL199/1.30) is a set of 12 laminated colour charts prepared according to the programme for biology 7-8, with content in the Albanian language. The charts cover human anatomy topics such as long-bone structure, blood, teeth, the eye, ear and skin, and finish with the structure of plant and animal cells. Each one-page chart measures 70 x 100 cm on plastic sheet, and the series is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

Each chart lines up with a single lesson: put up the chart for the day's topic, introduce the structures it shows, then leave it on display while students complete their notebooks. The long-bone, blood and teeth charts support a unit on the skeleton and body tissues; the eye, ear and skin charts cover the sense organs; and the liver and excretory charts round off digestion and waste removal. The chart on positions of the fetus before birth gives teachers a clear, factual visual for reproduction lessons.

The final two charts, on plant and animal cells, make a natural bridge to microscope work and pair well with three-dimensional cell models. In a school biology lab setup, the laminated sheets can be wiped with a damp cloth after use and stored flat between terms.

Manufacturer

This chart series is manufactured by Jain Scientific Equipments Private Limited, an Ambala, Haryana company whose products are sold under the ScienceLab name. Alongside teaching charts, the company makes biology models and laboratory apparatus for institutions in India and international markets. Details about the organisation are on the ScienceLab profile page.

Related Laboratory Equipment

Three-dimensional aids and chart sets that match these lesson topics:

• Plant Cell Structure — 3D model to accompany the plant cell chart.
• Animal Cell Structure — 3D model to accompany the animal cell chart.
• Human Teeth — teaching aid for the human teeth lesson.
• Series of Teaching Model in Relief for Biology 6-7-8 — relief panels on human body systems.
• Biology Learning Table Series 9 — the follow-on chart series on genetics and cell division.

More teaching aids are listed under Laboratory Equipment.

Frequently Asked Questions

How many charts are included, and what size are they?
12 one-page charts, each 70 x 100 cm, laminated and in colour.

What language is the content in?
Albanian, following the programme for biology 7-8. If you need another language, discuss it with us through the contact page.

Which topics do the charts cover?
Long-bone anatomy, blood composition, the liver, human teeth, the excretory apparatus, fetal positions before birth, the vegetative nervous system, the eye, ear and skin, and plant and animal cell structure.

How durable are the charts?
They are laminated plastic sheets that can be wiped clean. Store them flat or rolled and avoid folding.

Can the charts be combined with 3D models in one order?
Yes. Cell models and other anatomy aids can be added to the same quotation.

What does a tender or bulk quotation need?
The product code SCL199/1.30, the number of sets, the delivery address and any tender specification you must meet.

Request a Quote

For pricing on the Biology Lesson Plan Series 7-8, send an enquiry or add it to the enquiry cart.

Last updated: 24 September 2026

Biology Learning Table Series 9 (Product Code: SCL201/1.31) is a compact set of six laminated charts on genetics, cell division and behaviour, prepared according to the programme for biology 9 with contents in the Albanian language. Topics run from DNA structure and the laws of trait inheritance to mitosis, meiosis and the birth of conditioned reflexes. Each one-page chart measures 70 x 100 cm, and the series is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

These charts carry the more abstract topics of the biology 9 course. Teachers typically open with the DNA structure chart, then use the two inheritance-law charts to work through simple crosses and predict how traits appear in offspring. Displaying the mitosis and meiosis charts side by side helps students compare the number of divisions and the chromosome content of the resulting cells, a comparison that appears regularly in exams.

The conditioned reflexes chart links the course to behaviour and the nervous system, giving the set a broader reach than a genetics-only poster pack. For genetics teaching, pair the charts with a DNA model kit so students can handle the double helix they have just studied. Keep the laminated sheets clean with a damp cloth and store them flat between terms.

Manufacturer

Trading as ScienceLab, Jain Scientific Equipments Private Limited makes this chart series in Ambala, Haryana. Its catalogue spans teaching charts, biology models and laboratory apparatus, supplied to schools, colleges and education authorities in India and international markets. Learn more about the company on its profile page.

Related Laboratory Equipment

Models that bring the genetics and cell division charts to life:

• The Structure of DNA — extends the DNA structure chart.
• DNA (Helical) Models — hands-on double helix for student groups.
• Cell Reproduction - Mitosis — shows mitosis stages in more detail.
• Sex Cell Reproduction - Meiosis — supports the meiosis chart.
• Biology Lesson Plan Series 7-8 — the preceding chart series on anatomy and cells.

Browse further items in Laboratory Equipment.

Frequently Asked Questions

How many charts are in the set?
Six one-page charts, each 70 x 100 cm, laminated and coloured.

What language and programme do they follow?
The contents are in Albanian and follow the programme for biology 9.

Which genetics topics are included?
DNA structure, the law of trait uniformity and the law of decomposition (segregation) of traits, alongside charts on mitosis and meiosis.

Can the charts be supplied in another language?
This listing describes Albanian content only. Discuss other language needs with us through the contact page.

How should the charts be stored?
Flat or loosely rolled, away from heat and moisture; wipe the laminated surface with a damp cloth when needed.

Can you supply sets for several schools?
Yes. Share the number of sets and the delivery details, and we will prepare a quotation that includes packing and any warranty terms.

Request a Quote

Get a quotation for Biology Learning Table Series 9 by contacting us, or add it to the enquiry cart together with matching genetics models.

Last updated: 24 September 2026

Herbarium Series for the Vegetation of Albania (Product Code: SCL205/1.32) is a collection of 15 plant specimens drawn from the vegetation of Albania, covering plants without seeds as well as plants whose seeds are completely covered and plants with naked seeds. Each specimen is identified with its province, location and name in both Albanian and scientific language, giving botany classes a ready reference for plant classification. The series is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.

Specifications

Typical Use

A herbarium lets students study genuine plant material at any time of year. In a classification lesson, sort the specimens into the groups represented – plants without seeds, naked-seed plants and plants whose seeds are enclosed – and ask learners to justify each placement from what they can see. Woody specimens with their reproductive bodies and herbaceous specimens with flowers and roots offer plenty to compare, while the algae and lichen material widens the discussion to simpler organisms.

Because each specimen records its province and location, the series also supports lessons on local flora and habitats, and on how botanists document a collection. Handle the specimens gently, keep them dry and protected from insects, and use a hand lens rather than touching delicate parts. For botany lab equipment lists, the herbarium complements flower models and plant tissue slides.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies this herbarium series alongside the biology models, charts and apparatus it manufactures. Institutions in India and international markets can include specimen collections like this in one consolidated order. Read about the company on the ScienceLab profile.

Related Laboratory Equipment

Items that support herbarium-based botany lessons:

• Hand Magnifier — for examining leaves, flowers and reproductive bodies up close.
• Series of Microscopic Preparation for The Construction of Plant — shows plant structure at tissue level.
• Dicotyledonous Flower Pattern — flower model to explain the parts seen on the specimens.
• Biology Learning Table Series 6 — charts on forest life, biomes and food webs.

See the complete Laboratory Equipment range.

Frequently Asked Questions

How many specimens are included?
15 plant specimens from the vegetation of Albania, covering seedless plants, covered-seed plants and naked-seed plants.

What information accompanies each specimen?
The province, the location, and the plant's name in Albanian and in scientific language.

Which plants are in the series?
The coverage listed includes Marsha, Shoqova, Mersina, Laulija, Ahu, Geshtenja, Qarri, Lisi, fir, Komba, Fieri, algae and lichen, and lime. Please confirm the final specimen list through the contact page before ordering.

How should the herbarium be stored?
Keep it flat in a dry cupboard, away from sunlight, damp and insects, and handle the specimens as little as possible.

Is a herbarium of another region available?
This series covers the vegetation of Albania. For other botanical requirements, describe what you need and we will advise.

What should an order enquiry include?
The product code SCL205/1.32, the number of sets and the delivery address; supply terms are confirmed in our quotation.

Request a Quote

To request this herbarium series, contact our team or add it to the enquiry cart with your other botany items.

Last updated: 24 September 2026

Series of Teaching Boards for Health Education, Environmental Protection (Product Code: SCL209/1.33) is a set of ten large printed wall boards for lessons on pollution, damaged ecosystems and the substances that harm human health. Each board is a one-page, laminated, coloured plastic sheet, so the series works as long-lasting biology teaching aids that can stay on display for a whole term. The content follows the biology programme for grades 6, 7 and 8, which makes the set a natural fit for middle-school science and health-education rooms. The series is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Boards in the series:

• Protection of the environment from waste
• Pollution of the seas
• Carbon monoxide and sulfur dioxide
• Smog
• Destruction of the ecosystem
• Poisons in the human food chain
• AIDS
• Drugs
• Harmful effects of alcohol
• Risks from smoking

Typical Use

Teachers usually put up one or two boards at a time and build a lesson around them: the smog and carbon monoxide boards pair well with a unit on air quality, while the waste, sea pollution and ecosystem boards support discussion of how human activity changes habitats. The food-chain board helps students see how a toxin released into the environment can end up on their own plates, which links the environmental half of the series to the health half.

The alcohol, drugs, smoking and AIDS boards give a clear starting point for health-education periods, assemblies and parent meetings. As a biology chart set for schools, the boards are easiest to use when fixed at student eye level on a display wall with suitable clips; boards not on display should be stored flat so the laminate does not crease. Because the printed text is in Albanian, please tell us your teaching language when you enquire.

Manufacturer

Jain Scientific Equipments Private Limited, the Ambala, Haryana company that trades as ScienceLab, produces classroom display material and laboratory apparatus for schools and colleges. The company is incorporated under CIN U29309HR2020PTC087597, and production takes place at its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414). Read more on the ScienceLab company profile.

Related Laboratory Equipment

These single-topic boards and a companion series help you extend or duplicate individual lessons from this set:

• Protection of the Environment from Waste — a stand-alone wall board on the waste theme, handy for a second classroom
• Pollution of the Seas — lets an eco-club keep the marine topic on permanent display
• Air Pollution : Smog — supports a dedicated air-quality corner alongside the full series
• Damage from Smoking — a separate board for anti-tobacco awareness sessions in the health room
• Biology Lesson Plan Series 7-8 — a companion set of boards for the wider grade 7–8 biology syllabus

More teaching aids and apparatus are listed in the Laboratory Equipment category.

Frequently Asked Questions

How many boards are included and what size is each one?
The series has 10 boards, each 70 x 100 cm. They are one-page, laminated, coloured plastic sheets intended for wall display.

Which topics do the boards cover?
Protection of the environment from waste, pollution of the seas, carbon monoxide and sulfur dioxide, smog, destruction of the ecosystem, poisons in the human food chain, AIDS, drugs, harmful effects of alcohol and risks from smoking.

What language is the text on the boards?
The content is in Albanian and is arranged according to the biology programme for grades 6, 7 and 8. If you teach in another language, raise it through our contact page before ordering so we can advise you.

Can the boards be used outside biology lessons?
Yes. The health topics suit health-education periods, assemblies and counselling sessions, and the environmental boards fit geography or environmental-studies lessons as well.

How should the laminated boards be cleaned?
Wipe them with a soft, slightly damp cloth and dry them straight away. Avoid solvents and abrasive pads, which can dull the laminated surface.

Can a school order several sets or single boards?
Multiple sets can be quoted for schools, districts and projects. Some themes, such as waste and smoking, also appear as separate listings (see the related items above), so send your list and quantities for a combined quotation.

Do you supply outside India?
Yes. ScienceLab supplies schools and distributors in India and international markets; share your destination and quantity when you ask for a quote.

Request a Quote

To order this board series, send your quantity and delivery location through the ScienceLab contact page, or add it to the enquiry cart together with other classroom items so we can prepare one quotation.

Last updated: 24 September 2026

Microscope for Dissection (Product Code: SCL203/02) is a low-power dissecting microscope that magnifies a specimen up to 20X while leaving room on the stage for both hands to work with needles and forceps. It is used in school and college biology practicals for dissecting flowers, seeds, insects and other small specimens, and a jointed revolving arm lets the lens sweep across the stage instead of the student moving the specimen. This piece of biology lab equipment is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

A typical practical starts with the specimen in a small dish or on a pad at the centre of the stage. Students tilt the mirror towards a window or bench lamp until the field is evenly lit, focus with the rack and pinion, and then swing the lens arm to follow the part they are cutting or separating. At up to 20X the view suits floral parts, seed structure, insect mouthparts and legs, and the organs of small preserved animals, where a compound microscope would show too small an area.

The detachable hand rests make a real difference during fine work such as teasing apart a flower or removing an insect wing, because wrists can rest at stage height rather than hovering. Paired with a dissection set for biology practicals, the microscope lets a group take turns on one specimen without disturbing it. Use the plane side of the mirror in bright light and the concave side when light is weak, and wipe the stage after work with preserved material.

Manufacturer

ScienceLab is the name under which Jain Scientific Equipments Private Limited makes and sells laboratory apparatus from Ambala, Haryana, and its biology range includes dissecting and teaching microscopes such as this one. Details of the company and its range are on the company profile page.

Related Laboratory Equipment

Items commonly used at the same dissection bench:

• Complete Dissections — a student dissection kit with the instruments needed to work under the lens
• Dissecting Needle — for teasing apart tissue and lifting fine structures while viewing
• Dissection Pan, Pad & Cover — a pan and pinning pad for specimens that must be held in place
• Tava Dissection — a stainless steel tray for larger dissections prepared beside the microscope
• Digital Trinocular Microscope — the next step when students need cell-level magnification and on-screen images

See the full Laboratory Equipment range for more practical apparatus.

Frequently Asked Questions

What magnification does this dissection microscope give?
Up to 20X. That range is meant for dissection and whole-specimen study; for cells and tissues a compound microscope is the right tool.

Does it need an electrical supply?
No lamp is listed for this model. Illumination is by reflected light from a plano-concave mirror in a fork mount, 40–50 mm in diameter, so a window or a separate bench lamp provides the light.

How do students examine a large specimen?
The jointed revolving arm carries the magnifying lens over the stage, so the whole stage area can be scanned without shifting the specimen.

Can the hand rests be removed?
Yes. The rests on either side of the stage are detachable, so they can be fitted for fine work and taken off when a larger dish is used.

How is focusing done?
By rack and pinion, which gives smooth, controllable movement that students pick up quickly.

Is a warranty or test document provided?
Warranty terms and any inspection documents are confirmed with the quotation; please ask through our contact page.

Can we order a class set?
Yes. Quantities for full practical classes, colleges and tenders can be quoted, including supply to international markets.

Request a Quote

For a class set or a single unit, send your requirement via contact us or place the microscope in the enquiry cart; we reply with availability and a formal quotation.

Last updated: 24 September 2026

Digital Trinocular Microscope (Product Code: SCL205/03) is a compound microscope with a built-in 3MP camera and a 10.1 inch Windows tablet, used to view, display and capture specimens at up to 1000x total magnification in school, college and teaching laboratories. Because the live image appears on the tablet, a teacher can show the whole group the same field at once. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for biology and microbiology departments.

Specifications

What Is the Digital Trinocular Microscope Used For?

In a teaching lab the tablet turns a one-person view into a shared one: the teacher focuses a prepared slide, points out nuclei or stomata on the display, and students then find the same structures through the eyepieces. Captured images can go into worksheets, practical records or project files, and a class can compare its own temporary mounts with a reference image taken on the same instrument. As a compound microscope for biology departments, it suits histology, plant anatomy and pond-water microorganism studies.

For clear images, start at the lowest magnification, centre the specimen and then move up; use the iris diaphragm on the Abbe condenser to balance brightness and contrast rather than relying only on the LED intensity control. The coaxial knobs on both sides let left- and right-handed users focus comfortably. Cover the microscope when it is not in use to keep dust off the optics.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, supplies this digital microscope to schools, colleges, laboratories and distributors, and can quote it together with slides, cover slips and stains for a complete microscopy set-up. Visit the ScienceLab profile to learn how the company works with educational buyers.

Related Laboratory Equipment

Slides, stains and prepared specimens to use with this microscope:

• Lama — plain glass microscope slides for students' own temporary mounts.
• Lamela — glass cover slips to seal specimens before viewing at high magnification.
• Dyes and Reagents for Microscopes — stains that add contrast to cells before imaging on the tablet.
• Series of Microscopic Preparation for Human Histology — ready-made tissue slides for on-screen demonstrations.
• Series of Microscopic Preparation for The Construction of Plant — prepared plant specimens for anatomy lessons.

Find more optical and teaching apparatus in Laboratory Equipment.

Frequently Asked Questions

What camera and screen does it have?
The Digital Trinocular Microscope has a built-in 3MP camera and a built-in 10.1 inch Windows tablet, so the live image can be shown on the tablet screen and captured for worksheets, records or project files.

What is the maximum magnification?
The Digital Trinocular Microscope reaches up to 1000x total magnification. The exact objective and eyepiece line-up is not listed here, so ask us for the combination supplied with the unit you are quoted.

Which power supply does it use?
The Digital Trinocular Microscope runs from an AC/DC adapter with an input range of 100–240V, so check only that your socket type matches the adapter plug before the first lesson.

How is the light controlled?
The Digital Trinocular Microscope has a transmitted (lower) LED illuminator with adjustable intensity and an NA 1.25 Abbe condenser with iris diaphragm, so contrast can be tuned for stained or unstained specimens.

Will it stand up to daily classroom use?
The Digital Trinocular Microscope has all-metal mechanical components and coaxial coarse and fine focus knobs on both sides. Covering it after use and cleaning lenses only with lens tissue keeps it in good order for daily classroom work.

Can calibration or inspection documents be supplied?
Calibration or inspection documents are not listed for the Digital Trinocular Microscope. If your institution needs any documentation, please discuss it with us through the contact page before you place the order.

Who supplies the Digital Trinocular Microscope?
The Digital Trinocular Microscope is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. Schools, colleges and distributors can request a quotation, with or without slides and stains, through the contact page.

Request a Quote

Share your quantity and specification needs through our contact form, or add this microscope to the enquiry cart to request pricing along with slides and stains.

Last updated: 24 September 2026

Field Stereomicroscopy Kit (Product Code: SCL207/04) brings together the tools needed to find, catch, examine and dissect insects and other small animals that live on land. Alongside hand magnifiers and a collecting net, it includes a binocular stereomicroscope, so specimens gathered on a school ground or nature trail can be studied in three dimensions back in the lab or at an outdoor table. It is a practical insect collection kit for schools, eco-clubs and college zoology groups, made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

A field session usually begins with the 10 cm entomological mesh and the insect collector, sweeping low vegetation or leaf litter and transferring finds without crushing them. The 4x centimetre insect magnifier gives a first look on the spot, while the 10x magnifying glass shows detail such as antennae, wing veins and leg segments. Specimens then travel in the Ø60 mm Petri dish to the binocular stereomicroscope.

Under the stereomicroscope, students can sort catches by insect order, record features in a field notebook and, where the syllabus requires it, carry out simple dissections on the dissection plate with the included instruments. As an ecology science kit it supports biodiversity counts, habitat comparisons and project work. Release live animals where they were found whenever possible, and clean and dry the instruments and dish after every outing.

Manufacturer

This kit comes from Jain Scientific Equipments Private Limited, which does business as ScienceLab from Ambala, Haryana. The company is a registered MSME enterprise (Udyam UDYAM-HR-01-0003714), and its export consignments are handled under Importer-Exporter Code AAECJ8618A issued by the DGFT. You can read more on the company profile.

Related Laboratory Equipment

Useful additions for field work and follow-up in the lab:

• Field Microscopy Kit — the companion kit for freshwater microorganisms, for pond and stream sampling
• Insect Catch Set — a hand net for catching flying insects to study under the stereomicroscope
• Centered Magnifier for Insects — a magnifying container for observing a live insect without harming it
• Microscopy Accessories Kit — extra scissors, tweezers and needles so more students can work at once
• Petri Dish (Complete) — glass dishes with lids for storing and sorting additional catches

Browse more fieldwork and biology apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What is included in the kit?
Equipment for dissection of animals, a 4x centimetre insect magnifier, a Ø25 mm 10x magnifying glass, an insect collector, a 10 cm entomological mesh, a dissection plate, a complete dissection set, a binocular stereomicroscope and a Ø60 mm Petri dish.

Which magnifications are available?
The insect magnifier gives 4x and the magnifying glass 10x. The magnification of the binocular stereomicroscope is not stated in this listing, so please confirm it with us.

Is the kit meant for pond or stream organisms?
No. It is intended for insects and small animals living on land. For freshwater microorganisms, choose the Field Microscopy Kit.

Does the stereomicroscope need mains power?
Power and illumination details are not listed for this kit. Please check with us through the contact page if you plan to use it away from a socket.

How should the kit be looked after following field work?
Brush off soil, rinse and dry the instruments and Petri dish, and store the stereomicroscope covered and away from damp.

Can schools order several kits for group work?
Yes. We quote for group sets, science centres and tenders, and supply buyers across India and international markets.

Request a Quote

Tell us how many groups you plan to equip through the contact page, or add the kit to the enquiry cart, and we will send a quotation with delivery details.

Last updated: 24 September 2026

Field Microscopy Kit (Product Code: SCL209/05) is a take-along set for collecting and examining the microorganisms that live in freshwater ponds, streams and tanks. It pairs a 400x monocular microscope with a water collector, glass dropper bottle, magnifying glass, 50 slides and 200 cover slips, giving students what they need to go from water sample to wet mount. Designed as a microscopy starter kit for schools and environmental clubs, it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

Students fill the water collector at the edge of a pond or from a stream, let the sample settle in the plastic Petri dish, and scan it first with the magnifying glass to spot larger organisms and clumps of algae. A drop taken with the dropper is placed on a slide, covered with a cover slip and viewed under the 400x monocular microscope, where protozoa, algae and small invertebrates such as water fleas become visible.

Because the kit carries 200 cover slips for 50 slides, fragile cover slips can be replaced freely while slides are cleaned and reused. For an environmental science lesson, compare samples from still and running water, or from clean and polluted sites, and record which organisms appear. Rinse slides and the dish in clean water after use and let them dry before packing.

Manufacturer

Jain Scientific Equipments Private Limited, known to customers as ScienceLab, manufactures school and college science apparatus in Ambala, Haryana, and its biology range includes field kits like this one. The about-the-company page gives background on the business.

Related Laboratory Equipment

Consumables and companion items for freshwater microscopy:

• Lama — spare glass slides when the kit’s own supply runs short
• Lamela — replacement cover slips for regular pond-water practicals
• Dyes and Reagents for Microscopes — stains such as methylene blue to make transparent organisms easier to see
• Water Sampler — collects water from a chosen depth in a lake or river
• Field Stereomicroscopy Kit — the land-based companion kit for insects and small animals

More microscopy items are in our Laboratory Equipment category.

Frequently Asked Questions

What magnification does the microscope provide?
It is a 400x monocular microscope, suitable for protozoa, algae and other freshwater microorganisms.

How many slides and cover slips come with the kit?
50 slides and 200 cover slips, together with a plastic Ø60 mm Petri dish.

Are stains included?
No stains are listed in this kit. Our Dyes and Reagents for Microscopes set can be added for stained preparations.

How is the microscope lit?
The illumination and power details are not given in this listing; please confirm them with us through the contact page before planning outdoor use.

Can the slides be reused?
Yes, if they are washed and dried carefully after each session. Cover slips are thin and break easily, so the larger supply of them is useful.

Do you quote for multiple kits or overseas delivery?
Yes. Send the number of kits and the delivery location; we supply schools and distributors in India and international markets.

Request a Quote

Request pricing for one kit or a set for every group via the contact page; you can also collect items in the enquiry cart and submit them together.

Last updated: 24 September 2026

Microscopy Accessories Kit (Product Code: SCL211/06) is a compact set of hand tools for preparing specimens before they go under the microscope: cutting thin pieces, picking up fragments, teasing tissue apart and measuring what has been collected. It contains two types of scissors, two types of tweezers, a scalpel with an interchangeable blade, two hand-held needles and a ruler, which is what most students need to make their own temporary slides in a biology practical. It is produced by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

Typical Use

In a typical onion-peel or leaf-epidermis practical, students lift a thin layer with the straight-edged tweezers, trim it to size with the thin-tipped scissors and spread it flat with a needle before adding a stain and cover slip. The scalpel handles thin hand sections of stems and roots, and the round-tipped tweezers are gentler on delicate material and safer for younger classes. The ruler helps record specimen size and keep pieces uniform.

Because each tool has a clear job, the kit is a tidy way to issue one set per bench and check everything back in at the end of the lesson. Used with slides and stains, it forms the core of a temporary slides biology kit for school labs. Replace the scalpel blade when it starts to tear rather than cut, handle blades with care, and wash and dry all tools after work with plant sap or preserved tissue.

Manufacturer

This kit is offered by Jain Scientific Equipments Private Limited, the Ambala, Haryana manufacturer that trades as ScienceLab, as part of a wider line of microscopy and dissection equipment for teaching laboratories. Company background is available on the ScienceLab profile.

Related Laboratory Equipment

Pair these tools with the items below for complete slide preparation:

• Kit for the Preparation of Preparations — a larger stainless steel set with a hand microtome for thinner sections
• Lama — glass slides for mounting what the tools prepare
• Lamela — cover slips to finish each mount
• Dyes and Reagents for Microscopes — stains to colour cells once the specimen is cut and spread
• Microscope for Dissection — magnifies fine dissection work done with these tools

Explore the wider Laboratory Equipment category for more microscopy supplies.

Frequently Asked Questions

What tools are in the kit?
A ruler, thin-tipped scissors, lab scissors, straight-edged tweezers, round-tipped tweezers, an interchangeable-blade scalpel, 1 scalpel blade and two hand-held needles.

How many scalpel blades are supplied?
One blade comes with the interchangeable-blade scalpel. If you expect heavy use, mention spare blades in your enquiry.

What material are the tools made of?
The material is not specified in this listing. Please confirm it through our contact page if your lab has a requirement.

Is the kit suitable for younger students?
The round-tipped tweezers and needles are straightforward to use, but the scalpel and sharp scissors should only be used under teacher supervision.

Are slides or stains included?
No. Slides, cover slips and stains are available separately; see the related items above.

Can we order a kit for every bench?
Yes. Bench sets for schools and colleges can be quoted, with delivery across India and to international markets.

Request a Quote

Ask for a quotation for single kits or bench sets through our contact page, or use the enquiry cart to combine the kit with slides and stains.

Last updated: 24 September 2026

Kit for the Preparation of Preparations (Product Code: SCL213/07) is a set of stainless steel and handled instruments for making microscope preparations, the thin sections and mounts that students examine on slides. Four types of tweezers, a flexible double spatula, microscope scissors, two handled needles, a scalpel and a hand microtome let a teacher or technician cut, lift and arrange plant and animal material with control. It suits botany and zoology practicals in secondary schools and colleges and is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

The hand microtome is the centre of the kit: a piece of stem or root, often supported in a slice of carrot or potato, is held in it and sliced with the hand scalpel to give sections thin enough for light to pass through. Sections are lifted with the flexible double spatula or the lanceolate needle, flattened with the straight or arched tweezers and transferred to a slide, where the handled needle helps lower the cover slip without trapping air bubbles.

The round bottom and clamped tweezers are useful for holding soft animal tissue in zoology practicals, while the microscope scissors trim leaf pieces and membranes. For botany lab equipment that is used every week, rinse the instruments after each session, dry them fully before storage and keep blades and needle points protected so they stay sharp.

Manufacturer

Jain Scientific Equipments Private Limited operates as ScienceLab from Ambala in Haryana and manufactures and supplies instruments like this preparation set to school and college laboratories. More about who we are is on the company profile.

Related Laboratory Equipment

Items that complete the slide-making workflow:

• Lama — glass slides to receive the finished sections
• Lamela — cover slips to be lowered with the handled needle
• Dyes and Reagents for Microscopes — stains and Canada balsam for coloured or permanent mounts
• Biological Microscope — a compound microscope for examining the sections you cut
• Microscopy Accessories Kit — a smaller tool set for individual students at each bench

Further slide-preparation equipment is listed under Laboratory Equipment.

Frequently Asked Questions

What instruments are included?
Straight, arched and round bottom tweezers, clamped tweezers, a stainless steel elongated-blade tool, a plastic-handled scalpel, microscope scissors, a flexible double spatula, two handled needles (one lanceolate) and a microtome with hand scalpel.

How long are the tweezers?
The straight, arched and round bottom tweezers are 120 mm and the clamped tweezers 105 mm, all in stainless steel.

What is the microtome used for?
It holds a specimen steady so the hand scalpel can cut thin, even sections for microscope slides.

What is the “screw with elongated blade” in the list?
It is listed as a stainless steel tool with an elongated blade. If you need its exact form confirmed, ask us through the contact page before ordering.

Are slides and stains part of the kit?
No. Slides, cover slips and stains are ordered separately; see the related items above.

Can the kit be supplied in quantity for a college or tender?
Yes. We quote for department and tender quantities and deliver within India and to international markets.

Request a Quote

Send your required number of kits and any additional items through the contact page, or add the kit to your enquiry cart for a consolidated quotation.

Last updated: 24 September 2026

Dyes and Reagents for Microscopes (Product Code: SCL215/08) is a staining set of six biological colorants with supporting reagents, used to stain and mount specimens for light microscopy in school and college biology labs. Teachers and students use it for temporary and permanent mounts; each stain has its own 10 ml bottle, alongside 25 ml of ethyl alcohol, 10 ml of Canada balsam and a 10 ml oil. This staining kit for the biology lab is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Microscope Stain Set Used For?

As a microscopy starter kit for school and college practicals, the set gives each stain a distinct job. Methylene blue colours nuclei in cheek cells and many microorganisms, while eosin gives cytoplasm a pink contrast. Gentian violet is the familiar first stain of Gram-staining exercises, nigrosine darkens the background so unstained bacteria stand out, and neutral red serves as a vital stain on living cells. Lugol's solution turns starch grains blue-black in potato preparations and makes nuclei in onion epidermis easier to see.

Ethyl alcohol is used for cleaning slides and for simple dehydration steps, and Canada balsam is the classic mounting medium when a good temporary mount is to be kept as a permanent slide. Apply stains a drop at a time and blot the excess with filter paper. Keep the bottles tightly closed and upright, store the set away from heat and sunlight, and keep the alcohol away from flames. Wear gloves and eye protection, and ask us for handling information on any reagent in the set.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana, India. The company supplies this stain and reagent set to schools, colleges, dealers and institutional buyers in India and international markets, and can quote it together with the glass slides, cover slips and microscopes listed on this site. For vendor registration, the supplying company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Read more on the company profile page.

Related Laboratory Equipment

Items used alongside the stains when preparing and viewing slides:

• Lama — ground-edge glass slides for smears and mounts
• Lamela — glass cover slips to place over stained specimens
• Kit for the Preparation of Preparations — tweezers, needles, scalpel and a hand microtome for preparing material to stain
• Biological Microscope — a compound microscope for examining the stained cells
• Immersion Oil, 25ml — a dedicated immersion oil for labs using oil-immersion objectives

Further slide-preparation and microscopy items are in the Laboratory Equipment category.

Frequently Asked Questions

Which stains are included in Dyes and Reagents for Microscopes?
Dyes and Reagents for Microscopes (SCL215/08) includes six stains, each in a 10 ml bottle: methylene blue, eosin, gentian violet, nigrosine, neutral red and Lugol's solution. Together they cover nuclear, cytoplasmic, negative, vital and starch staining in routine school and college practicals.

What else comes in the Dyes and Reagents for Microscopes set?
Besides its six stains, the Dyes and Reagents for Microscopes set contains 25 ml of ethyl alcohol, 10 ml of Canada balsam for permanent mounts and a 10 ml oil that the product details list as “eyelid oil”. Please confirm the identity of that oil with us before ordering.

What is the oil listed as “eyelid oil” in this set?
The oil in Dyes and Reagents for Microscopes is named “eyelid oil” in the product details, and its exact identity should be confirmed through the contact page. If your microscopes need immersion oil for oil-immersion objectives, say so in your enquiry so the quotation covers it.

Can Dyes and Reagents for Microscopes be used for Gram staining?
Partly. Dyes and Reagents for Microscopes contains gentian violet and Lugol's solution, the first two reagents of the Gram method, but it does not include a counterstain such as safranin. A complete Gram stain therefore needs that counterstain added separately.

What is the shelf life of the stains in this set?
The shelf life of the stains and reagents in Dyes and Reagents for Microscopes depends on the chemical, its grade and storage conditions; ask us for the expiry date of the batch you are quoted. Keep the bottles tightly closed, cool and out of direct light.

Who supplies Dyes and Reagents for Microscopes?
Dyes and Reagents for Microscopes is supplied by Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab from Ambala, Haryana, India. The company sources the set and quotes it to schools, colleges, dealers and institutional buyers in India and international markets.

Can Dyes and Reagents for Microscopes be shipped internationally?
Yes, ScienceLab supplies Dyes and Reagents for Microscopes to India and international markets. Because the set contains ethyl alcohol, a flammable liquid, the shipping method for export orders is agreed at quotation, so mention the destination country when you enquire.

Can you provide documents for the reagents in this set?
Documentation for the reagents in Dyes and Reagents for Microscopes, such as safety or analysis sheets, should be discussed with us before the order is placed. Tell us through the contact page which documents your lab or purchase department needs.

Request a Quote

To order Dyes and Reagents for Microscopes, tell us the number of sets and the delivery location through the contact page, or add the set to the enquiry cart. Repeat orders for the next term's practicals can be requested the same way.

Last updated: 24 September 2026

Kit for Demonstrating Plant Respiration (Product Code: SCL217/09) provides the support stand and glassware for classroom set-ups showing that plants, like animals, respire and release carbon dioxide. A stand on a metal rod with a metal ring of 90 mm clamping diameter holds apparatus steady above a 600 ml chemical glass, so a teacher can assemble a clear, stable demonstration on the front bench. As plant biology lab equipment it fits the respiration unit of school biology courses and is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

A common arrangement uses the ring to hold a funnel, flask or container of living plant material, such as germinating seeds, flowers or leafy shoots, above or beside the 600 ml chemical glass, which holds an indicator or water depending on the version of the experiment the class is following. Students then look for a change in the indicator or in the water level showing that the plant material has used oxygen or given off carbon dioxide. The kit provides the stand, ring and glass; living material and indicator solutions such as lime water are prepared separately.

Running a parallel set-up with boiled (dead) seeds gives a simple control and helps students see that the effect comes from living tissue, which makes this a useful biology experiment kit for students learning to plan a fair test. Tighten the ring firmly on the 600 mm rod before loading it, keep the chemical glass on a level bench, and wash and dry the glassware after use.

Manufacturer

The kit is manufactured by Jain Scientific Equipments Private Limited, the Ambala, Haryana company whose school and college apparatus is sold under the ScienceLab name. Visit the company profile for an overview of its biology range.

Related Laboratory Equipment

Items used with this kit or for related respiration lessons:

• Kit for Demonstrating Seed Respiration in Germination — focuses the same topic on sprouting seeds
• Lime Water — an indicator that turns milky when carbon dioxide passes through it
• Glass Beaker — extra beakers for control set-ups and indicator solutions
• Respiration Apparatus — compares inhaled and exhaled air to link plant and human respiration
• Apparatus for Photosynthesis — for the contrasting lesson on gas released by plants in light

Find more plant physiology apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What is supplied in this kit?
A stand with a 600 mm metal rod, a metal ring with 90 mm clamping diameter and a 600 ml chemical glass.

Are seeds, plants or indicator solutions included?
No. Living material is prepared by the school, and Lime Water is available separately as a carbon dioxide indicator.

What size of apparatus will the ring hold?
The ring has a 90 mm clamping diameter, so check that your funnel or flask fits within it before the lesson.

Can the stand be used for other experiments?
Yes. The rod and ring work as general bench support for filtration and other simple biology or chemistry set-ups.

How long does the demonstration take?
It depends on temperature and on how much living material is used; many teachers set it up at the start of the day and read the result later.

What information does a school quotation need?
The number of kits, delivery address and any extra glassware or indicator you want included. We supply India and international markets.

Request a Quote

For school orders, send your quantity and delivery details through the contact page, or place the kit in the enquiry cart along with lime water and spare glassware.

Last updated: 24 September 2026

Kit for Demonstrating Seed Respiration in Germination (Product Code: SCL219/010) is a plant physiology kit for showing students that seeds become metabolically active as they germinate and begin to respire, taking in oxygen and releasing carbon dioxide and heat. It gives biology teachers a hands-on way to connect the germination topic with cellular respiration, and it fits well as a seed germination kit for school labs. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

Typical Use

In the classic form of this experiment, soaked seeds that have just begun to sprout are placed in a closed container and compared with a control of boiled seeds. Students then look for signs that only the living seeds are respiring: carbon dioxide turning an indicator such as lime water milky, a rise in temperature, or a drop in the volume of air as oxygen is used.

Pulses, wheat or maize seeds soaked overnight usually give reliable results, and keeping both containers at the same room temperature makes the comparison fair. The lesson also works as a plant growth experiment kit activity for project work, with students recording observations over several days. Because this listing does not state the component list, please ask us what is included so you can plan any extra glassware or indicator solution.

Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a manufacturer of teaching apparatus based in Ambala, Haryana, serving schools, colleges and education departments. Learn more on the company profile page.

Related Laboratory Equipment

Related kits and supplies for germination and respiration lessons:

• Kit for Demonstrating CO2 Emission and Heat Production in Germinating Seeds — a kit that tracks both carbon dioxide and temperature from sprouting seeds
• Kit for Demonstrating Plant Respiration — a stand-and-glass set-up for respiration in other plant material
• Lime Water — a carbon dioxide indicator for the living-versus-boiled seed comparison
• Laboratory Thermometer — for recording the warmth given off by germinating seeds
• Conical Jar (Erlenmeyer) 250 ml — flasks to hold soaked seeds for the test and the control

More biology demonstration kits are listed in Laboratory Equipment.

Frequently Asked Questions

Which components are in the seed respiration kit?
This page does not publish the component list. Ask us through the contact page and we will share it with the quotation.

Which seeds work well for this demonstration?
Seeds that germinate quickly, such as pulses, wheat or maize, soaked overnight and allowed to begin sprouting.

Why are boiled seeds used as a control?
Boiling kills the seeds, so any difference between living and boiled seeds shows that the carbon dioxide and heat come from respiration rather than from the surroundings.

Is an indicator solution supplied?
Please confirm this when you ask for the component list. Lime Water can be ordered separately if needed.

How does this kit differ from the CO2 and heat production kit?
That kit is listed with its full contents: flasks, a thermometer, baryta water and an aspiration pump. For this kit, ask us for the component list so you can compare the two.

Can we order for several schools or for export?
Yes. We handle multi-school and project orders and supply India and international markets.

Request a Quote

Ask for the component list and a quotation through the contact page, or add this kit to the enquiry cart with any glassware you need.

Last updated: 24 September 2026

Kit for Demonstrating CO2 Emission and Heat Production in Germinating Seeds (Product Code: SCL221/011) lets a class prove two things about germination with one set-up: sprouting seeds give off carbon dioxide, and they warm up as they respire. It includes Erlenmeyer flasks, a three-neck flask, a 0–100°C thermometer, baryta water (barium hydroxide solution) and an aspiration pump to draw air through the system. This school biology lab equipment is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

Germinating seeds are placed in the 500 ml three-neck flask, with the 0–100°C thermometer fitted through one neck to track temperature. The aspiration pump draws air over the seeds and on through the silicone tubing into a 250 ml Erlenmeyer flask of baryta water; as carbon dioxide arrives, the clear solution turns cloudy with a white barium carbonate precipitate. The second Erlenmeyer flask can hold baryta water at the air inlet, so students see that incoming air causes little change while the air leaving the seeds does.

A matching flask of boiled seeds, or a comparison of the thermometer reading with room temperature, gives a clear control for a school biology lab setup. Pump air slowly and steadily so bubbles can be counted and the cloudiness builds gradually. Barium hydroxide is harmful if swallowed and irritating to skin and eyes, so students should wear gloves and goggles, keep the bottle closed and wash their hands after the practical.

Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is an Ambala, Haryana manufacturer of science teaching apparatus, including a series of plant physiology demonstration kits. The company profile explains more about the business and its range.

Related Laboratory Equipment

Spares and companion items for this germination practical:

• Conical Jar (Erlenmeyer) 250 ml — spare flasks of the same capacity for the baryta water
• Rubber stoppers with holes of different diameters — one-hole stoppers in several sizes for adapting the set-up
• Rubber Tube (Laboratory) — extra tubing when the apparatus needs longer connections
• Laboratory Thermometer — a second thermometer for the boiled-seed control
• Kit for Demonstrating Seed Respiration in Germination — a related kit on seed respiration

Other plant physiology kits are in the Laboratory Equipment category.

Frequently Asked Questions

What apparatus comes in this CO2 and heat kit?
Two 250 ml Erlenmeyer flasks, a pair of silicone tubes with 2-hole rubber stoppers, 1 single-hole rubber stopper, a 500 ml three-neck glass flask, a 0–100°C thermometer, a bottle of barite water (barium hydroxide solution) and 1 three-valve aspiration pump.

What temperature range does the thermometer cover?
0–100°C, which comfortably covers the small temperature rise produced by germinating seeds.

Why does the baryta water turn cloudy?
Carbon dioxide reacts with the dissolved barium hydroxide to form insoluble barium carbonate, which appears as a white cloudiness.

Are seeds included?
No seeds are listed. Use seeds soaked in water until they begin to sprout, plus a batch of boiled seeds for the control.

Is barium hydroxide solution safe for school use?
It can be used under teacher supervision with gloves and goggles. It is harmful if swallowed, so keep it away from food and dispose of it according to your school’s chemical waste rules.

Is a warranty or test document available for this kit?
Warranty terms and any documents you need are confirmed with the quotation; ask through the contact page.

Can the kit be ordered in bulk or for export?
Yes. We quote for school, college and tender quantities in India and international markets.

Request a Quote

Request a quotation for this kit, with or without spare flasks and stoppers, via the contact page, or add it to the enquiry cart.

Last updated: 24 September 2026

Kit for Demonstration of Transpiration in Plants (Product Code: SCL223/012) shows students how water travels up through a plant and leaves it as vapour, mostly from the leaves. A stand and clamp support the set-up over a 600 ml chemical beaker, a 20 x 200 x 2 mm glass tube is included, and a colouring liquid makes the movement of water visible. It is a straightforward transpiration experiment kit for school and college botany, made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

Transpiration is not the same as simple evaporation. Water moves from the soil into the roots, up the stem through the conducting vessels and out through the leaves into the air, and the rate depends both on the surroundings, such as light, temperature and air movement, and on the plant itself, which regulates the loss through its stomata. In young plants almost every surface exposed to air can lose water this way, which is why transpiration is treated as a complex physiological process rather than a purely physical one.

In class, a leafy shoot is placed in the coloured liquid, held by the stand and clamp, and students watch the colour move into the veins while the liquid level falls. Comparing a shoot in still air with one near a fan, or one with its leaves coated in petroleum jelly, turns the demonstration into a fair-test investigation for botany lab equipment practicals. Cut shoots under water to avoid air locks, and rinse the glass tube and beaker straight after use so the colouring does not stain them.

Manufacturer

ScienceLab is the brand of Jain Scientific Equipments Private Limited, an Ambala, Haryana company registered with the Ministry of Corporate Affairs under CIN U29309HR2020PTC087597. The company manufactures at its licensed factory in HSIIDC Industrial Area, Saha, Ambala, covered by Factory Licence AMB-ONLINE-CHD-J-414. Full company details are on the profile page.

Related Laboratory Equipment

Further apparatus for studying water movement in plants:

• Potometer — measures the rate of water uptake by a cut shoot under different conditions
• Potometer Apparatus — a student version for measuring transpiration in small shoots
• Cross Section of the Leaf — a model showing the stomata and veins where transpiration happens
• Kit for Demonstrating the Absorption of Mineral Salts in Plants — follows the water pathway into mineral uptake
• Kit for Demonstrating Root Pressure — covers the root-side force that also moves water upward

See all plant physiology and botany items in Laboratory Equipment.

Frequently Asked Questions

Which parts come in the transpiration kit?
A stand, a 600 ml chemical beaker, colouring liquid, a 20 x 200 x 2 mm glass tube and a clamp.

Is a plant supplied with the kit?
No. Use a fresh leafy shoot or a young plant, cut under water just before the lesson.

What does the colouring liquid show?
As the shoot takes up the coloured liquid, the colour appears in the veins of the stem and leaves, making the water pathway visible.

How is this kit different from a potometer?
This kit demonstrates transpiration visually, while a Potometer measures the rate of water uptake so students can compare conditions with numbers.

Which conditions speed up transpiration?
Bright light, warmth, moving air and dry air generally increase the rate; humid, still, cool conditions reduce it.

What should a college or tender enquiry include?
The quantity, delivery address and any tender reference. We supply institutions in India and international markets.

Request a Quote

To order kits for your botany practicals, contact us through the contact page or add the kit to the enquiry cart, including quantity and delivery address.

Last updated: 24 September 2026

Kit for Demonstrating Root Pressure (Product Code: SCL225/013) is a plant physiology demonstration kit for showing root pressure, the push generated in the roots that forces water up into the stem even when the leaves are not drawing it. It helps teachers explain why sap can ooze from a freshly cut stem and how roots contribute to the upward movement of water. Like the rest of this plant physiology series, it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

Typical Use

The usual method uses a healthy, well-watered potted plant with a soft stem. The stem is cut a short distance above the soil, a tube is attached firmly to the stump, and a little water is added so the starting level can be marked. Over the following hours the level rises as the roots push sap upward, giving students direct evidence of root pressure.

Watering the pot thoroughly beforehand and keeping it in a warm room helps the effect appear sooner. Linking the result to transpiration and osmosis gives a complete picture of water transport and makes the kit useful plant biology lab equipment for practical assessment. Please contact us for the exact contents of this kit before planning your practical.

Manufacturer

Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, manufactures biology and general science apparatus in Ambala, Haryana for educational customers. The company profile has more background.

Related Laboratory Equipment

Items that support lessons on how water moves through plants:

• Root Pressure Apparatus — a borosilicate glass set-up with a full description of its parts
• Osmotic Pressure Apparatus — shows the osmosis that drives water into root cells
• Cross Section of the Root — a model of root anatomy and vascular tissue
• Kit for Demonstration of Transpiration in Plants — the leaf-side pull that complements root pressure
• Kit for Demonstrating the Absorption of Mineral Salts in Plants — extends the lesson to mineral uptake by roots

More water-transport apparatus is listed in the Laboratory Equipment category.

Frequently Asked Questions

What parts does the root pressure kit include?
Its parts are not listed on this page. Send a request through the contact page and we will list them for you with the quotation.

Which plant suits this demonstration?
A healthy, soft-stemmed potted plant that has been watered well; woody stems show the effect far less clearly.

How soon does the water level rise?
Usually over a few hours, and faster in warm conditions with moist soil. Setting it up early in the day gives time to observe within school hours.

Is there an alternative with a published parts list?
Yes, the Root Pressure Apparatus is a borosilicate glass set-up whose parts are described on its page.

What warranty applies?
Warranty terms are confirmed in the quotation; ask us if you need them in writing before ordering.

Do you supply schools abroad?
Yes. We supply schools, colleges and distributors in India and international markets.

Request a Quote

Please use the contact page to confirm contents and request a price, or add the kit to the enquiry cart with other plant physiology items.

Last updated: 24 September 2026

Kit for Demonstration of Aquatic Plant Respiration (Product Code: SCL227/014) is a demonstration kit for studying gas exchange in water plants. Its description sets out the purpose: to show how, during photosynthesis, plants give off molecular oxygen, which in submerged plants can be seen as a stream of bubbles. Teachers use it in biology lessons that compare respiration and photosynthesis in aquatic plants, and it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

Typical Use

A sprig of a submerged water plant such as Hydrilla or Elodea is placed in water under bright light, and the gas it releases is watched or collected. Students count bubbles with the lamp at different distances to see how light affects the rate, and a glowing splint test on collected gas confirms that it is oxygen.

Moving the same set-up into darkness shows the other side of the story: oxygen release stops, while respiration continues and the plant takes up oxygen instead. Adding a little sodium hydrogen carbonate to the water supplies extra carbon dioxide and gives a steadier bubble stream. As a photosynthesis experiment kit it suits both teacher demonstrations and student investigations; ask us for the component list so you can plan the rest of the apparatus.

Manufacturer

This kit is part of the plant physiology range of Jain Scientific Equipments Private Limited, which trades as ScienceLab and manufactures teaching apparatus in Ambala, Haryana. Read about the company on its profile page.

Related Laboratory Equipment

Apparatus for related photosynthesis and respiration lessons:

• Apparatus for Photosynthesis — collects and measures the gas evolved by aquatic plants
• Photosynthesis Apparatus — a panel-mounted alternative for gas collection from water plants
• Kit for Photosynthesis Experiments — adds a CO2 sensor and a temperature sensor for data-based lessons
• Kit for Demonstrating Plant Respiration — covers respiration in land plants and seeds
• Glass Beaker — beakers to hold the water plant during the demonstration

Browse more photosynthesis and plant biology items in Laboratory Equipment.

Frequently Asked Questions

What does this kit demonstrate?
Its description states that it shows how plants emit molecular oxygen during photosynthesis. Used in light and then in darkness, it also supports discussion of respiration in aquatic plants.

What is included?
The component list is not given in this listing; ask us through the contact page and we will confirm it before you order.

Which water plants are suitable?
Fast-growing submerged plants such as Hydrilla or Elodea, freshly cut and kept in water under good light.

How can students confirm that the gas is oxygen?
Collect enough gas in an inverted tube and test it with a glowing splint, which relights in oxygen.

What does a school need to state in a quotation request?
The number of kits, the delivery address and any related apparatus you want quoted together.

Can you deliver outside India?
Yes. ScienceLab supplies India and international markets; share your destination with your enquiry.

Request a Quote

For pricing and the component list, write to us via the contact page, or add this kit to the enquiry cart with any photosynthesis apparatus you need.

Last updated: 24 September 2026

Kit for Demonstrating the Absorption of Mineral Salts in Plants (Product Code: SCL229/015) helps students show that plants take up dissolved minerals through their roots and need them for healthy growth. It contains mineral salts and two 250 ml Erlenmeyer flasks, enough for a side-by-side comparison of a plant grown with nutrients and one grown without. The kit is a simple plant growth experiment kit for school biology and is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

Typical Use

A typical water-culture set-up fills one 250 ml Erlenmeyer flask with a solution of the mineral salts and the other with distilled water only. A seedling of similar size is supported in the neck of each flask with its roots in the liquid, and students record height, leaf colour and root growth over several weeks; the plant without minerals usually shows paler, weaker growth.

Covering the flasks with dark paper keeps light off the roots and reduces algae, and topping up with the same solution keeps the comparison fair. For project work in the botany lab, the idea can be extended by testing individual missing elements, as in the Sachs water-culture method. Ask us which salts are supplied and in what quantity so you can prepare solutions for your class size.

Manufacturer

Jain Scientific Equipments Private Limited, an Ambala, Haryana manufacturer that trades as ScienceLab, offers this kit alongside other school apparatus for plant biology and general science. Company information is on the ScienceLab company profile.

Related Laboratory Equipment

Items that extend mineral nutrition and water-transport lessons:

• Sach’s Water Culture Mineral Deficiency — culture material for the deficiency version of the experiment
• Conical Jar (Erlenmeyer) 250 ml — extra flasks to grow more plants or repeat treatments
• Kit for Demonstration of Transpiration in Plants — shows the water flow that carries minerals up the stem
• Cross Section of the Root — a root anatomy model for explaining uptake
• Kit for Demonstrating Root Pressure — a related demonstration of root function

Find more plant nutrition apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What is supplied in the mineral salts kit?
Mineral salts and two Erlenmeyer flasks of 250 ml each.

Which salts are included, and how much?
The individual salts and quantities are not listed here. Please ask through the contact page and we will confirm them with your quotation.

Are seedlings or seeds supplied?
No. Raise seedlings of a fast-growing crop such as maize or pulses in advance, and choose two of similar size.

How long does the experiment run?
Differences in growth usually show over several weeks, so plan it as a project rather than a single lesson.

Can individual nutrient deficiencies be tested?
Yes, with the Sach’s Water Culture Mineral Deficiency set, which provides culture material each lacking one element.

Do you take bulk or export orders?
Yes. We supply schools and distributors across India and international markets.

Request a Quote

Send your class size and quantity through the contact page, or add the kit to your enquiry cart together with spare flasks.

Last updated: 24 September 2026

Dutrochet Endosometer for Osmotic (Product Code: SCL231/016) is an osmosis demonstration set used to show how plants absorb water through osmosis in school and college biology laboratories. Biology teachers use it for whole-class demonstrations, and the set pairs a Dutrochet-type endosmometer with a chemical beaker and a bottle of sodium chloride (NaCl) for the salt solution. ScienceLab — Jain Scientific Equipments Pvt Ltd (ScienceLab) — makes it as an OEM manufacturer at its own factory in Ambala, India, as part of its plant biology lab equipment range.

Key Details

What Is the Dutrochet Endosmometer Used For?

The endosmometer recreates the classic experiment of Henri Dutrochet, who first described osmosis. A stronger sodium chloride solution is held inside the endosmometer, which is then stood in the chemical beaker filled with plain water. Water passes inward towards the salt solution and the liquid level climbs, giving students a clear picture of how root hair cells draw water from moist soil.

As an osmosis experiment kit for school practicals, it works well when the starting level is marked before the lesson and readings are taken at fixed intervals. Prepare the salt solution fresh for each class, keep the set steady on a level bench, and rinse every part with clean water afterwards so salt crystals do not build up.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of the Dutrochet Endosometer for Osmotic. The set is produced and assembled at the company’s own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges and dealers deal with the maker instead of a reseller. The company is a registered MSME whose major activity is manufacturing (Udyam UDYAM-HR-01-0003714), and its export consignments are shipped under Importer-Exporter Code AAECJ8618A issued by the DGFT.

Learn more about the company on the ScienceLab company profile.

Related Laboratory Equipment

These items from our catalogue support osmosis and plant water-transport lessons alongside the endosmometer:

• Osmotic Pressure Apparatus — a second set-up for studying osmotic pressure in the same topic.
• Visualising Osmosis & Diffusion Investigation — a student activity that extends the demonstration to diffusion.
• Sodium Chloride — extra salt for preparing fresh solutions for repeat classes.
• Glass Beaker — spare beakers for holding the outer water.
• Kit for Demonstration of Transpiration in Plants — follows water on from the roots to the leaves.

Browse the full Laboratory Equipment category for more biology apparatus.

Frequently Asked Questions

What is included with the Dutrochet Endosometer for Osmotic?
The Dutrochet Endosometer for Osmotic (SCL231/016) comes with three items: the endosmometer, a chemical beaker and a bottle of sodium chloride (NaCl) for making the salt solution. Ask us through the contact page if you need extra pieces for several student groups.

What does the Dutrochet endosmometer demonstrate?
The Dutrochet Endosometer for Osmotic demonstrates osmosis: water moves into a stronger salt solution and the level inside the endosmometer rises. Teachers use it to explain how plant roots take up water from the soil in plant physiology lessons.

How long does the sodium chloride in the set remain usable?
Shelf life of the NaCl supplied with the Dutrochet Endosometer for Osmotic depends on the chemical, its grade and storage conditions; ask us for the expiry date of the batch you are quoted. Keep the bottle tightly closed in a dry place between lessons.

Who manufactures the Dutrochet Endosometer for Osmotic?
The Dutrochet Endosometer for Osmotic is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Orders, spares questions and repeat supplies are handled directly by the manufacturer.

How should the endosmometer be cleaned after use?
After each demonstration, empty the Dutrochet Endosometer for Osmotic, rinse the endosmometer and beaker with clean water to remove salt residue, and let every part dry fully before storage. Handle the parts gently and store the set in a closed cupboard.

What information do you need to quote for this osmosis set?
To quote for the Dutrochet Endosometer for Osmotic, send the product code SCL231/016, the number of sets and your delivery location in India or abroad through the contact page. The quotation comes straight from the manufacturer.

Can you supply the Dutrochet Endosometer for Osmotic in bulk or for export?
Yes, the Dutrochet Endosometer for Osmotic can be quoted in multi-set quantities for schools, colleges, dealers and importers in India and international markets. Share your quantity and destination with us so we can confirm availability and dispatch details.

Request a Quote

To order the Dutrochet Endosometer for Osmotic, send your quantity and delivery details through the contact page or add it to the enquiry cart. Quotations come direct from the manufacturer in Ambala.

Last updated: 24 September 2026

Kit for Photosynthesis Experiments (Product Code: SCL233/017) is a sensor-based kit used to study photosynthesis by following carbon dioxide and temperature inside a reaction cell in school and college biology laboratories. It suits teachers who want measured readings rather than bubble counts, and it combines one photosynthesis cell with one CO2 sensor and a platinum temperature sensor. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as a photosynthesis experiment kit for Indian and international buyers.

Key Details

What Is the Photosynthesis Sensor Kit Used For?

Green plant material is placed in the photosynthesis cell and lit, and the CO2 sensor tracks how the carbon dioxide level changes as the plant takes the gas up. Switching the light off, moving the lamp or shading the cell lets students compare photosynthesis with respiration and see how light intensity changes the rate.

The platinum temperature sensor records the temperature in the cell at the same time, so the class can check that a lamp is not simply warming the sample. As a biology experiment kit for students in higher classes, it encourages graph plotting, fair-test planning and discussion of limiting factors. Let the cell settle before each run and keep the sensors clean and dry between sessions.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies the Kit for Photosynthesis Experiments from Ambala, Haryana, India. We source the kit for schools, colleges, teacher-training institutes and dealers, and we can quote it together with related plant physiology items from our catalogue so a whole practical can be ordered in one enquiry.

Read about the company on the ScienceLab company profile.

Related Laboratory Equipment

Pair the sensor kit with these items to cover photosynthesis from several angles:

• Apparatus for Photosynthesis 1 — measures the gas given off by aquatic plants with a calibrated capillary.
• Photosynthesis Apparatus — a classic set-up for demonstrating oxygen release.
• Prepared Microscope Slide Set – Photosynthesis and Adaptations — shows the leaf structures where photosynthesis happens.
• Kit for Demonstration of Aquatic Plant Respiration — for comparing photosynthesis with respiration.

See more in the Laboratory Equipment category.

Frequently Asked Questions

What comes in the Kit for Photosynthesis Experiments?
The Kit for Photosynthesis Experiments (SCL233/017) consists of one cell for photosynthesis, one CO2 sensor and a platinum temperature sensor. These three parts let students follow carbon dioxide levels and temperature inside the cell during a light experiment.

What does the CO2 sensor in the photosynthesis kit measure?
In the Kit for Photosynthesis Experiments, the CO2 sensor follows the carbon dioxide level inside the photosynthesis cell. Students can watch it fall while the plant material photosynthesises in light and compare it with readings taken in darkness.

Does the kit include a data logger or display for the sensors?
No data logger, interface or display is listed for the Kit for Photosynthesis Experiments; the listing names only the cell, the CO2 sensor and the platinum temperature sensor. Please ask us through the contact page which reading device the sensors need before ordering.

Who supplies the Kit for Photosynthesis Experiments?
The Kit for Photosynthesis Experiments is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. We source the kit and handle quotations, packing and dispatch for schools, colleges, dealers and importers.

Is a calibration certificate available for the sensors?
Calibration-certificate availability for the sensors in the Kit for Photosynthesis Experiments should be discussed with us before you order. Mention the requirement in your enquiry and we will confirm what documentation can accompany the kit you are quoted.

What should a quotation request for this photosynthesis kit include?
For the Kit for Photosynthesis Experiments, include the product code SCL233/017, the number of kits, any matching items you need and the delivery location in India or abroad. Send these details through the contact page for a prompt reply.

Request a Quote

Request pricing for the Kit for Photosynthesis Experiments through the contact page, or add it to the enquiry cart with other items for your biology laboratory.

Last updated: 24 September 2026

Apparatus for Photosynthesis 1 (Product Code: SCL235/018) is a panel-mounted gas collection apparatus used to measure and collect the gas given off by aquatic plants during photosynthesis in biology classrooms and college laboratories. A calibrated capillary tube shows how much gas has been produced, while plastic syringes on a 190 × 150 mm plastic panel draw the gas off for analysis. Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, produces it at its own factory in Ambala, India.

Specifications

What Is the Photosynthesis Gas Collection Apparatus Used For?

A sprig of pondweed or another aquatic plant is placed in water under a lamp, and the bubbles it releases are guided into the calibrated capillary tube. Students read the length of the gas column at timed intervals, then change one factor at a time — lamp distance, light colour or carbon dioxide supply — to see how the rate of photosynthesis responds.

Once enough gas has gathered, the plastic syringes draw it off so it can be tested, for example with a glowing splint to show that it is rich in oxygen. This makes the apparatus a useful piece of school biology lab equipment for both secondary-school rate investigations and senior plant physiology work. Allow the plant a few minutes to adjust to each new light setting before recording results.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, is the OEM (original equipment manufacturer) of Apparatus for Photosynthesis 1. The capillary tube, syringes and plastic panel are put together at the company’s licensed factory at Saha, Ambala, Haryana, India, and the finished apparatus goes factory-direct to schools, colleges, institutions and dealers. If a syringe or the capillary needs replacing later, ask us — the manufacturer handles such requests itself.

More about the company is on the ScienceLab profile page.

Related Laboratory Equipment

Teachers planning a photosynthesis practical often order these alongside the gas collection apparatus:

• Apparatus for Photosynthesis — another set-up in the same series for demonstrating photosynthesis.
• Kit for Photosynthesis Experiments — follows carbon dioxide and temperature with sensors instead of gas volume.
• Kit for Demonstration of Aquatic Plant Respiration — shows the opposite process in water plants.
• Microslide Photosynthesis — prepared slides for studying leaf structure under the microscope.

Explore the complete Laboratory Equipment range.

Frequently Asked Questions

What does Apparatus for Photosynthesis 1 measure?
Apparatus for Photosynthesis 1 measures and collects the gas evolved by aquatic plants during photosynthesis. The volume is read on its calibrated capillary tube, which lets students compare rates when light or carbon dioxide conditions are changed.

How is the collected gas removed for testing?
On Apparatus for Photosynthesis 1, the gas is drawn off with the plastic syringes mounted on the panel. The sample can then be tested, for instance with a glowing splint, to show students that the gas produced in light is rich in oxygen.

What size is the panel of the photosynthesis apparatus?
The capillary tube and plastic syringes of Apparatus for Photosynthesis 1 are mounted on a 190 × 150 mm plastic panel. The compact panel keeps the parts together, so it can be stood beside a beaker of water and a lamp on a normal lab bench.

Are aquatic plants included with the apparatus?
Aquatic plants are not part of the listed contents of Apparatus for Photosynthesis 1, which covers the calibrated capillary tube and plastic syringes on the panel. Schools usually use fresh pondweed obtained for the lesson; ask us if you need other items for the set-up.

Who manufactures Apparatus for Photosynthesis 1?
Apparatus for Photosynthesis 1 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Buyers receive quotations and after-sales help directly from the manufacturer.

Can you quote Apparatus for Photosynthesis 1 for several schools or for export?
Yes, Apparatus for Photosynthesis 1 can be quoted in class-set quantities for schools, colleges, dealers and importers across India and international markets. Send the product code SCL235/018, the quantity and the destination through the contact page.

Request a Quote

For a quotation on Apparatus for Photosynthesis 1, use the contact page or place it in the enquiry cart. Prices are quoted directly by the manufacturer, ScienceLab.

Last updated: 24 September 2026

Kit for Demonstration of Processes in Kit for Breathing Experiments (Product Code: SCL239/020) is a breathing demonstration kit used to simulate how the lungs work during inhalation and exhalation and to reveal carbon dioxide in exhaled air in school biology classes. Teachers use its lung model for the mechanics of breathing and its bottle of lime water for the carbon dioxide test. The kit is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is the Breathing Experiments Kit Used For?

The lesson usually runs in two parts. First, the lung model shows what happens in the chest: as the space around the lungs enlarges, air flows in, and as it shrinks again, air is pushed out. Students link the movement they see to the rise and fall of their own ribcage and diaphragm.

Second, the lime water test proves that breathed-out air carries more carbon dioxide than room air, because clear lime water turns milky when carbon dioxide passes through it. The vacuum pipette and three-legged stand from the kit help keep the set-up tidy on the bench. For a health education kit in schools, remind students to breathe out only and never draw lime water towards the mouth.

What to Specify When Ordering

• The number of complete kits (lung model, vacuum pipette, lime water bottle and three-legged stand) for your classes.
• Whether you want extra lime water for repeat lessons, which we also list separately.
• Your delivery location in India or abroad, so the lime water bottle can be packed suitably.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM (original equipment manufacturer) behind this breathing kit. The lung model and the complete kit are assembled at the company’s own licensed factory at Saha, Ambala, Haryana, India, so the kit reaches your laboratory without passing through a trader. For a replacement part or a repeat order, ask us and the manufacturer will answer directly.

Company background is available on the ScienceLab profile.

Related Laboratory Equipment

These items extend a breathing and respiration topic beyond the kit itself:

• Lime Water — a refill for repeating the carbon dioxide test.
• Human Lung Model in Bell Jar — a larger bell-jar model for whole-class demonstrations.
• Spirometer — lets older students measure the volume of air they breathe.
• Lung Capacity Gauge — gives a numerical reading of breath airflow.

Find more apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What is included in the breathing experiments kit?
The Kit for Demonstration of Processes in Kit for Breathing Experiments (SCL239/020) contains one lung model, one vacuum pipette, one bottle of lime water and one three-legged stand. Together they cover the mechanics of breathing and the carbon dioxide test.

How does the kit show carbon dioxide in exhaled air?
The breathing experiments kit SCL239/020 uses lime water, which turns milky when carbon dioxide passes through it. Comparing breathed-out air with room air shows students that exhaled air carries noticeably more carbon dioxide.

How long does the lime water in the kit last?
Shelf life of the lime water in the Kit for Demonstration of Processes in Kit for Breathing Experiments depends on the chemical, its grade and storage conditions; ask us for the expiry date of the batch you are quoted. Keep the bottle tightly capped.

Is the breathing kit safe for students to use?
The breathing experiments kit SCL239/020 is intended for supervised classroom use. Students should only breathe out into the lime water set-up and never suck it towards the mouth, and everyone should wash their hands after handling the solution.

Who manufactures the Kit for Demonstration of Processes in Kit for Breathing Experiments?
This breathing kit (SCL239/020) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations, spares and repeat orders are handled by the manufacturer itself.

What details should I send for a quotation?
For the breathing experiments kit SCL239/020, send the product code, the number of kits, whether you need extra lime water and your delivery location through the contact page. ScienceLab can quote for schools, dealers and importers in India and international markets.

Request a Quote

Ask for a quotation on this breathing kit via the contact page, or collect it with other items in the enquiry cart. You will receive the quote directly from the manufacturer.

Last updated: 24 September 2026

Kit on the Consequences of Smoking (Product Code: SCL243/022) is a health education kit for schools, used to show how much tar and nicotine cigarette smoke leaves behind in biology and health lessons. A vacuum pump draws smoke through a high-efficiency fibreglass filter, and a comparison sheet helps students judge the amount of tar collected; 25 filters are included. The kit comes from Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer that makes it at its own factory in Ambala, India.

Specifications

What Is the Smoking Effects Kit Used For?

The kit turns an abstract health warning into something students can see. In a teacher-led demonstration, the vacuum pump pulls smoke from a lit cigarette through a fresh fibreglass filter, imitating the way a smoker draws smoke into the lungs. The white filter quickly stains brown, and matching it against the comparison sheet gives a rough measure of the tar deposited.

Repeating the run with different cigarettes lets the class compare results, while senior chemistry or biology students can take the used filters further for chemical analysis of the collected tars. Always run the demonstration in a well-ventilated room or fume cupboard, keep students at a safe distance from the lit cigarette, and dispose of used filters and ends safely.

What to Specify When Ordering

• How many kits you need; each kit contains 25 filters, a vacuum pump and a comparison sheet.
• How many demonstrations you plan, so we can discuss additional filters with you.
• Whether senior students will carry out tar analysis, so matching glassware can be quoted together.
• The delivery address in India or abroad for the quotation.

OEM Manufacturer

The Kit on the Consequences of Smoking is an OEM product of Jain Scientific Equipments Private Limited, the company that trades as ScienceLab. It is assembled at the company’s own licensed factory at Saha, Ambala, Haryana, India, and supplied straight from there to schools, health-education programmes, dealers and importers, with quotations prepared by the manufacturer rather than a middleman. For tender and vendor registration forms, the company’s GSTIN is 06AAECJ8618A1ZT and its Legal Entity Identifier (LEI) is 3358004HRD1JIVXKYX49.

Read the ScienceLab company profile for more background.

Related Laboratory Equipment

Build a complete anti-smoking and respiratory health lesson with these catalogue items:

• Damage from Smoking — a companion teaching aid on the harm smoking causes.
• Effects of Smoking Model — a model that shows the effects on the body for display and discussion.
• Microslide Smoking & Health — prepared slides for viewing affected tissue under a microscope.
• Breathing Fitness Health Lab — activities that connect smoking with breathing and fitness.

Browse the Laboratory Equipment category for further teaching kits.

Frequently Asked Questions

What is included in the Kit on the Consequences of Smoking?
The Kit on the Consequences of Smoking (SCL243/022) includes 25 filters, a vacuum pump and a comparison sheet for estimating the amount of tar in cigarettes. The filters are high-efficiency fibreglass filters that trap tars and nicotine from the smoke.

How does the smoking kit show the amount of tar?
In the Kit on the Consequences of Smoking, the vacuum pump draws cigarette smoke through a fibreglass filter that collects tars and nicotine. The stained filter is then matched against the comparison sheet to judge how much tar was deposited.

Can older students use the kit for chemical analysis?
Yes, the Kit on the Consequences of Smoking can be used by higher-level students for chemical analysis of cigarette tars collected on the filters. Younger classes normally use it as a visual demonstration led by the teacher.

What safety precautions apply to the smoking demonstration?
The Kit on the Consequences of Smoking should be operated only by a teacher in a well-ventilated room or fume cupboard. Students must never smoke or handle lit cigarettes, and used filters and cigarette ends should be disposed of safely after the lesson.

Who manufactures the Kit on the Consequences of Smoking?
The Kit on the Consequences of Smoking is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its licensed factory in Saha, Ambala, Haryana, India. Enquiries and repeat orders go straight to the manufacturer.

Can I get extra filters for the smoking kit?
Each Kit on the Consequences of Smoking includes 25 filters. If you expect to run more demonstrations, tell us the number you need through the contact page and we will confirm what additional filters we can quote.

Do you supply the smoking kit in bulk or for export?
Yes, the Kit on the Consequences of Smoking can be quoted in larger quantities for schools, health-education programmes, dealers and importers in India and international markets. Share the product code SCL243/022, quantity and destination with us.

Request a Quote

Send your requirement for the Kit on the Consequences of Smoking through the contact page or add it to the enquiry cart. The quotation will come direct from ScienceLab as the manufacturer.

Last updated: 24 September 2026

Kit for Digestion Experiments (Product Code: SCL245/023) is a food-test and digestion practical kit used to detect starch and protein and to study how digestion changes them in school and college biology laboratories. It gathers two chemical glasses, 10 corked test tubes, a spirit-heating set and bottles of Lugol solution, Biuret solution, starch, albumin and 10% hydrochloric acid in one box. Jain Scientific Equipments Pvt Ltd (ScienceLab) assembles it as an OEM manufacturer at its own factory in Ambala, India.

Specifications

What Is the Digestion Experiments Kit Used For?

Students begin with the classic food tests: a few drops of Lugol solution turn a starch sample blue-black, and Biuret solution turns an albumin sample violet, confirming protein. With these reference results in hand, they can follow what happens to starch and protein under digestion-like conditions, such as warming albumin with the dilute hydrochloric acid that mimics stomach acid.

The corked test tubes keep each sample separate and labelled, the filter papers clear cloudy mixtures, and the alcohol lamp, tripod stand and mesh provide gentle heating. As a biology experiment kit for students, it supports group practicals from middle school upwards. Wear eye protection when handling hydrochloric acid, keep the denatured alcohol away from flames, and put the lamp out with its cap rather than blowing on it.

What to Specify When Ordering

• The number of kits, based on how many student groups work at the same time.
• Any extra starch, Lugol solution or Biuret solution needed for repeat practicals.
• Your preferred heating mesh material, so we can confirm what the kit will contain.
• The delivery location in India or abroad, as the kit includes bottled chemicals.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of the Kit for Digestion Experiments. The glassware, heating items and chemical bottles are brought together and packed as one kit at the company’s licensed factory at Saha, Ambala, Haryana, India. Schools, colleges and dealers buy it direct from the maker, and refills for individual components can be discussed with the same team.

Visit the ScienceLab profile to learn more about the company.

Related Laboratory Equipment

These items help you restock or extend the digestion practical:

• Soluble Starch — extra starch for repeating the iodine test.
• Biuret Reagent (Protein Test) — a refill for the protein test.
• Denatured Ethanol (Alcohol for burning) — fuel for the alcohol lamp.
• Test Tube Rack — holds the 10 test tubes upright during the tests.
• Prepared Microscope Slide Set – Digestion — shows digestive tissues under the microscope.

See the wider Laboratory Equipment category for more practical kits.

Frequently Asked Questions

What is in the Kit for Digestion Experiments?
The Kit for Digestion Experiments (SCL245/023) contains 250 ml and 100 ml chemical glasses, 10 corked test tubes, a test tube holder, dropper, plastic stirrer, spoon, 25 circular filter papers, an alcohol lamp, tripod stand, heating mesh and six chemical bottles.

Which food tests can students carry out with the digestion kit?
With the Kit for Digestion Experiments, students can test for starch using Lugol solution and for protein using Biuret solution. The starch and albumin bottles provide reference samples, and the 10% hydrochloric acid supports experiments on protein under acidic conditions.

How long do the chemicals in the kit remain usable?
Shelf life of the chemicals in the Kit for Digestion Experiments depends on the chemical, its grade and storage conditions; ask us for the expiry date of the batch you are quoted. Store the bottles closed, upright and away from heat.

What safety precautions apply to the digestion kit?
When using the Kit for Digestion Experiments, students should wear eye protection around the hydrochloric acid, keep denatured alcohol away from open flames and let heated glassware cool before touching it. A teacher should supervise lighting and extinguishing the alcohol lamp.

What material is the heating mesh in the kit?
Our earlier listing for the Kit for Digestion Experiments describes the heating mesh as an asbestos mesh. Please ask us through the contact page to confirm the mesh material supplied with the kit you are quoted before you order.

Who manufactures the Kit for Digestion Experiments?
The Kit for Digestion Experiments is manufactured and assembled by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations and refill enquiries are answered by the manufacturer directly.

Can the digestion kit be supplied in quantity for schools or export?
Yes, the Kit for Digestion Experiments can be quoted in class-set quantities for schools, colleges, dealers and importers in India and international markets. Send the product code SCL245/023, quantity and destination so we can advise on packing the chemical bottles.

Request a Quote

Request a price for the Kit for Digestion Experiments through the contact page or add it to the enquiry cart. Quotations are issued directly by ScienceLab as the manufacturer.

Last updated: 24 September 2026

Water Analysis Kit (Product Code: SCL247/024) is a basic water study kit used to collect, observe and prepare water samples in school science and environmental studies lessons. Students take samples with its water collector and inspect them with a 7x magnifier, using a 250 ml chemical glass, funnel, dropper and plastic stirrer to handle each sample. Every kit is produced by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Water Analysis Kit Used For?

The kit introduces young scientists to looking at water critically. Samples from a tap, a school tank, a pond or a stream are gathered with the water collector and poured into the chemical glass, where students note colour, clarity, smell and any settled sediment. The 7x magnifier then reveals suspended particles, plant fragments and tiny aquatic animals that are hard to see with the naked eye.

The funnel can hold a filter paper to compare how clear each sample becomes after filtering, while the dropper transfers small volumes for closer observation. As an environmental science kit for school projects, it pairs well with pH paper for simple chemical checks. Label every sample, collect from just below the surface, and rinse all pieces with clean water between samples.

OEM Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM (original equipment manufacturer) of the Water Analysis Kit and puts each kit together at its own licensed factory at Saha, Ambala, Haryana, India. Buying from the manufacturer gives schools and dealers one point of contact for quotations, repeat kits and any replacement pieces needed later — simply ask us.

Find out more on the ScienceLab company profile.

Related Laboratory Equipment

Extend a water investigation with these items from our range:

• Soil Analysis Kit — the companion kit for studying soil samples.
• Water And Soil Analysis Kit — a combined kit for both sample types.
• Paper, Universal, pH 1-14 — adds a quick pH check to each water sample.
• Petri Dish — a shallow dish for spreading a sample under the magnifier.

More items are listed in the Laboratory Equipment category.

Frequently Asked Questions

What is included in the Water Analysis Kit?
The Water Analysis Kit (SCL247/024) includes a 250 ml chemical glass, one dropper, one 7x magnifier, one funnel, one plastic stirrer and one water collector. These items cover collecting, observing and preparing water samples in class.

What magnification does the magnifier in the kit give?
The magnifier supplied with the Water Analysis Kit gives 7x magnification. That is enough for students to spot suspended particles, algae and small aquatic organisms in a water sample before moving to a microscope for finer detail.

Does the Water Analysis Kit include chemical test reagents?
No chemical reagents or test strips are listed in the Water Analysis Kit; it focuses on sampling and observation. For simple chemical checks, schools often add universal pH paper, which we can quote together with the kit on request.

Which water samples can students study with the kit?
The Water Analysis Kit suits any sample students can collect safely, such as tap water, stored tank water, rainwater, ponds and slow streams. Comparing clean and natural samples side by side makes differences in clarity and suspended matter easy to discuss.

Who manufactures the Water Analysis Kit?
The Water Analysis Kit is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Quotations and repeat orders come straight from the manufacturer.

How do I get a quotation for several Water Analysis Kits?
Send the product code SCL247/024, the number of Water Analysis Kits and your delivery location in India or abroad through the contact page. We quote schools, colleges, dealers and importers, including class-set quantities.

Request a Quote

To request pricing for the Water Analysis Kit, write to us through the contact page or add the kit to the enquiry cart. Your quotation comes directly from the manufacturer.

Last updated: 24 September 2026

Soil Analysis Kit (Product Code: SCL249/025) is a hands-on soil study kit used to settle, separate and examine soil samples in school geography, agriculture and science lessons. Its 100 ml graduated cylinder suits sedimentation tests that reveal sand, silt and clay layers, supported by a 250 ml chemical glass, funnel, dropper, plastic stirrer and spoon. Made as an earth science kit for Indian classrooms, it is built by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Soil Analysis Kit Used For?

The most familiar activity is the settling test. A spoonful or two of soil goes into the graduated cylinder, water is added and the mixture is stirred well, then left to stand. Heavier sand drops first, silt follows and fine clay settles last, so students can read the thickness of each band against the graduations and describe the soil texture.

The chemical glass and stirrer are used to make a soil and water mixture, and the funnel, lined with filter paper, clears it into a liquid extract that can be tested for pH. Comparing garden, field and roadside soils shows why some grounds drain quickly and others hold water. Dry the soil lightly and break up lumps before measuring so results from different groups can be compared fairly.

What to Specify When Ordering

• The number of Soil Analysis Kits, one per working group being the usual planning basis.
• Whether you also need pH paper or filter paper, which are not part of the kit listing.
• Whether a soil sampling tool is required for field collection.
• The delivery location in India or abroad.

OEM Manufacturer

The Soil Analysis Kit comes from ScienceLab’s own production. Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) and assembles the kit at its licensed factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and questions about individual pieces go straight to the manufacturer rather than through a trader.

Company details are on the ScienceLab profile page.

Related Laboratory Equipment

Complete a soil investigation with these items:

• Garden Auger Soil — collects soil cores from below the surface.
• Ph Paper — checks the acidity of the filtered soil extract.
• Filter Paper — lines the funnel when preparing a clear extract.
• Dessicator (Soil Analysis) — keeps dried soil samples free of moisture.
• Water Analysis Kit — the matching kit for water samples.

View the full Laboratory Equipment category.

Frequently Asked Questions

What does the Soil Analysis Kit contain?
The Soil Analysis Kit (SCL249/025) contains a 250 ml chemical glass, one dropper, one funnel, one plastic stirrer, one 100 ml graduated cylinder and one spoon. These pieces cover sampling portions, mixing, settling and filtering soil in class.

What is the 100 ml graduated cylinder used for?
In the Soil Analysis Kit, the 100 ml graduated cylinder is used for sedimentation tests. Soil and water are shaken or stirred together and left to settle, and the graduations let students measure the sand, silt and clay layers.

Can the Soil Analysis Kit test soil pH?
The Soil Analysis Kit does not list a pH indicator, but its funnel and chemical glass prepare the filtered extract needed for a pH test. Add pH paper, which we can quote with the kit, to complete the measurement.

How many kits does a class need?
The Soil Analysis Kit is a single set of equipment, so the number needed depends on how many groups work at once. Tell us your class size through the contact page and we will quote the right quantity.

Who manufactures the Soil Analysis Kit?
The Soil Analysis Kit is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools and dealers receive quotations and after-sales answers directly from the manufacturer.

Is the Soil Analysis Kit available for bulk or export orders?
Yes, the Soil Analysis Kit can be quoted in class-set and larger quantities for schools, colleges, dealers and importers in India and international markets. Include the product code SCL249/025, quantity and destination in your enquiry.

Request a Quote

Get a quotation for the Soil Analysis Kit through the contact page, or add it to the enquiry cart together with any sampling tools. Quotes are prepared directly by the manufacturer.

Last updated: 24 September 2026

Simple Respirator (Product Code: SCL251/026) is a three-ball breathing exerciser, also known as a lung exerciser, respirometer or respiratory exerciser, used to make inhaled airflow visible in biology, physiology and health-education settings. When the user breathes in through the mouthpiece, the PE balls lift inside the ABS chamber, so breathing effort can be seen at a glance. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

What Is the Three-Ball Breathing Exerciser Used For?

In a classroom, the exerciser gives students an instant picture of airflow during inhalation. A slow, deep breath through the mouthpiece lifts one, two or all three balls, and learners can compare how many balls rise and how long they stay up after rest and after light exercise. The activity links neatly to lessons on the lungs, the diaphragm and the effect of fitness on breathing.

For hygiene, each user should have their own unit or mouthpiece, and the exerciser should be kept clean and dry between sessions. It is presented here as a teaching and general-use item; ScienceLab makes no clinical or therapeutic claims, and anyone using it for health reasons should follow the advice of a qualified healthcare professional.

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab and supplies the Simple Respirator from Ambala, Haryana, India, sourcing it for schools, colleges, training centres and dealers in India and international markets. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT).

More information is on the ScienceLab company profile.

Related Laboratory Equipment

Other breathing-study items that suit the same lesson:

• Peak Flow Meter — measures how fast air can be blown out, the opposite of the exerciser’s inhalation view.
• Spirometer — records the volume of air breathed in and out.
• Lung Capacity Gauge — gives a numerical breath airflow reading for comparison.
• Kit for Demonstration of Processes in Kit for Breathing Experiments — models how the lungs fill and empty.

Browse the Laboratory Equipment category for more items.

Frequently Asked Questions

What is the Simple Respirator?
The Simple Respirator (SCL251/026) is a three-ball breathing exerciser, also called a lung exerciser, respirometer or respiratory exerciser. Breathing in through its mouthpiece lifts the balls in the chamber, giving a simple visual indication of inhaled airflow.

What materials is the Simple Respirator made from?
The Simple Respirator has an ABS chamber with PE (polyethylene) balls, a mouthpiece and EVA tubing. These lightweight plastics make the three-ball exerciser easy to handle, carry between rooms and wipe clean after use.

Can the Simple Respirator be used for medical treatment?
The Simple Respirator is listed as a breathing exerciser for teaching and general use, and ScienceLab makes no clinical or therapeutic claims for it. Anyone using it for a health condition should follow the advice of a qualified healthcare professional.

Can several students share one breathing exerciser?
For hygiene, each user should have their own Simple Respirator or mouthpiece, because the mouthpiece is breathed through directly. Tell us the number of users when requesting a quotation so we can quote a suitable quantity.

Who supplies the Simple Respirator?
The Simple Respirator is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. We source the three-ball exerciser and handle quotations and dispatch for schools, colleges, training centres, dealers and importers.

What should I include in a quotation request?
For the Simple Respirator, send the product code SCL251/026, the quantity, the intended users and your delivery location in India or abroad through the contact page. We will reply with a quotation for your requirement.

Request a Quote

Enquire about the Simple Respirator through the contact page, or add it to the enquiry cart with other breathing-study items.

Last updated: 24 September 2026

Potometer (Product Code: SCL253/027) is a plant physiology apparatus used to measure how quickly a cut shoot absorbs water, and so to demonstrate transpiration rates, in school and college botany laboratories. It consists of a water bottle, a glass support that holds the plant and a graduated tube on which the movement of water is read under different external conditions. This potometer is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own factory in Ambala, India.

Key Details

What Is the Potometer Used For?

A freshly cut leafy shoot is fitted into the glass support while everything is held under water, so no air enters the stem. With the water bottle and graduated tube filled, a small air bubble is introduced into the tube, and students time how far it travels as the shoot draws water up. The distance per minute gives the rate of water uptake.

Because nearly all of that water is lost through the leaves, the reading is a practical stand-in for transpiration. Placing a fan nearby, moving the shoot under a lamp or enclosing it in a plastic bag shows how wind, light and humidity change the rate, which makes it a core transpiration experiment for India’s school syllabuses. Seal the joints well and let the shoot settle before starting each reading.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of this Potometer. It is made at the company’s own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, institutions and dealers in India and international markets. If you later need a spare graduated tube or support, ask us — the request goes to the team that makes the apparatus.

Read more on the ScienceLab company profile.

Related Laboratory Equipment

These items fit naturally into a transpiration practical:

• Kit for Demonstration of Transpiration in Plants — shows water loss from leaves in a simple class demonstration.
• Potometer Apparatus (Ganong’s) — an alternative potometer design for comparison.
• Potometer Apparatus — another potometer option for additional student groups.
• Digital Chronometer (Stopwatch) — times the bubble movement accurately.

See the full Laboratory Equipment category.

Frequently Asked Questions

What does the Potometer measure?
The Potometer (SCL253/027) measures the rate at which a cut shoot absorbs water. Because most absorbed water is lost from the leaves, it is used to demonstrate transpiration rates under various external conditions such as light, wind and humidity.

What are the parts of this potometer?
This Potometer consists of a water bottle, a glass support for the plant and a graduated tube for measurement. The shoot sits in the support, water is drawn from the bottle, and movement along the graduated tube is read by students.

Does a potometer measure transpiration exactly?
The Potometer measures water uptake by the shoot, which closely follows transpiration because only a small share of the water is used inside the plant. For school work it is treated as a reliable indicator of how fast the leaves lose water.

How can air leaks be avoided when setting up?
Cut the shoot and fit it into the Potometer under water, then make sure every joint is sealed so no air enters. A leak-free set-up keeps the bubble moving steadily and gives students consistent readings between trials.

Who manufactures the Potometer?
The Potometer (SCL253/027) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools and dealers receive quotations and spares support directly from the manufacturer.

Can you quote the Potometer for a full class or for export?
Yes, the Potometer can be quoted in class-set quantities for schools, colleges, dealers and importers in India and international markets. Send the product code SCL253/027, the number of units and the destination through the contact page.

Request a Quote

To order the Potometer, contact us through the contact page or add it to the enquiry cart. The quotation will come direct from ScienceLab, the manufacturer.

Last updated: 24 September 2026

Lung Capacity Gauge (Product Code: SCL255/028) is a piston-type breath gauge used to measure the airflow of a forceful breath, on a 60 to 900 L/min flow range, in biology, physiology and physical education lessons. Built from a cylinder, piston and pipe, it gives students a quick numerical reading to compare between individuals or before and after exercise, with a stated accuracy of 5%. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Lung Capacity Gauge Used For?

Students take a full breath, seal their lips around the pipe and blow out as hard and fast as they can. The air pushes the piston along the cylinder, and the position it reaches gives the flow in litres per minute. Taking the highest of three attempts gives a fair result that can be charted against height, age group or activity level.

Repeating the test before and after a short run, or comparing athletes with non-athletes, turns a simple reading into a discussion of lung health and fitness. Remember that the gauge reads flow in L/min rather than a volume in litres; pair it with a spirometer when lung volumes are the topic. Clean the pipe between users in line with your school’s hygiene practice.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the Lung Capacity Gauge from Ambala, Haryana, India. We source the gauge for schools, colleges, sports and health-education departments, and dealers, and can quote it alongside other breathing-study items in a single enquiry. No clinical or diagnostic claims are made for this gauge.

See the ScienceLab company profile for more about us.

Related Laboratory Equipment

These items cover other parts of a breathing and lung-function lesson:

• Spirometer — measures breathing volumes rather than flow.
• Lung Volume Bags — a simple way for students to see and compare breath volume.
• Peak Flow Meter — an alternative flow meter for additional groups.
• Simple Respirator — a three-ball exerciser that shows inhaled airflow.

More equipment is available in the Laboratory Equipment category.

Frequently Asked Questions

What does the Lung Capacity Gauge measure?
The Lung Capacity Gauge (SCL255/028) measures breath airflow on a range of 60 to 900 L/min. It shows how fast air is blown out through the pipe, which is a flow reading rather than a volume of air in litres.

How accurate is the Lung Capacity Gauge?
The stated accuracy of the Lung Capacity Gauge is 5% across its 60 to 900 L/min range. If you need a calibration certificate, please discuss availability with us through the contact page before ordering.

How should the gauge be stored?
The Lung Capacity Gauge is rated for storage between -20 and +40 °C, and its listed humidity figure is 95%. Keep it clean, dry and in its box between lessons so the piston moves freely when next used.

Can the Lung Capacity Gauge be used for medical diagnosis?
The Lung Capacity Gauge is offered for teaching, sports and general-interest measurements, and ScienceLab makes no clinical or diagnostic claims for it. Any health concern about breathing should be assessed by a qualified healthcare professional.

Who supplies the Lung Capacity Gauge?
The Lung Capacity Gauge is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. We source the gauge and handle quotations and dispatch for schools, colleges, sports departments, dealers and importers.

What do you need to prepare a quotation?
For the Lung Capacity Gauge, send the product code SCL255/028, the quantity and your delivery location in India or abroad through the contact page. We can also quote class sets for schools and dealers.

Request a Quote

Ask for pricing on the Lung Capacity Gauge through the contact page, or add it to the enquiry cart along with other physiology items.

Last updated: 24 September 2026

Simulator and Spinal Discopathy (Product Code: SCL257/029) is a lumbar spine anatomy model used to teach the structure of the vertebrae and to compare healthy and diseased intervertebral discs in biology, nursing and physiotherapy classrooms. It presents full-size normal L2, L3 and L4 vertebrae with intervertebral discs and a lumbar nerve section, fully articulating, together with two examples of disc disease. Jain Scientific Equipments Pvt Ltd (ScienceLab) makes the model as an OEM manufacturer at its own factory in Ambala, India.

Specifications

What Is the Spinal Discopathy Model Used For?

The model gives learners a life-size view of the lower back. Teachers point out the vertebral bodies, the arches and processes, the discs that cushion each joint and the nerve that leaves the spinal canal at every level. Because the segment is fully articulating, it can be bent gently to show how the discs are squeezed during forward and backward movement.

The two disc disease examples sit beside the healthy discs, so students can see how a damaged disc changes shape and why it may come close to the nerve. That comparison is useful in nursing, physiotherapy and sports science teaching, as well as in patient-education talks. Handle the model by the vertebrae rather than the nerve section, and clean it with a soft, slightly damp cloth.

OEM Manufacturer

Jain Scientific Equipments Private Limited — trading as ScienceLab — is the OEM (original equipment manufacturer) of this spinal discopathy model. As an anatomical models manufacturer, the company produces its models at its own licensed factory at Saha, Ambala, Haryana, India. Institutions ordering from ScienceLab deal directly with the maker, which keeps quotations straightforward and lets any after-sales question go to the people who produced the model.

Company information is on the ScienceLab profile.

Related Laboratory Equipment

For a complete spine and nervous system teaching set, consider these models:

• Human Lumbar Spinal Column Model — shows the whole lumbar region the L2–L4 segment belongs to.
• Human Vertebral And Partial Spinal Cord Model — relates the vertebrae to the spinal cord inside them.
• Economy Human Spine (vertebrae) and Thorax — places the lumbar spine within the full vertebral column.
• Human Spinal Cord Section Model — enlarges the nerve structures seen in cross-section.

Browse the Laboratory Equipment category for more models.

Frequently Asked Questions

Which vertebrae does the Simulator and Spinal Discopathy model show?
The Simulator and Spinal Discopathy model (SCL257/029) shows the L2, L3 and L4 lumbar vertebrae at full size in their normal form. The segment includes the intervertebral discs between them and a lumbar nerve section.

What disc conditions are shown on the model?
The Simulator and Spinal Discopathy model includes two examples of disc diseases alongside the healthy discs. Students can compare them directly to understand how a damaged disc differs in shape from a normal one.

Is the spinal discopathy model articulating?
Yes, the Simulator and Spinal Discopathy model is fully articulating. The vertebrae can be moved gently to show how the lumbar joints bend and how the intervertebral discs respond to forward and backward movement.

Who is the model suitable for?
The Simulator and Spinal Discopathy model suits biology classrooms, nursing and physiotherapy colleges, sports science courses and patient-education sessions. Its full-size lumbar segment makes it easy to pass around a small group during teaching.

Who manufactures the Simulator and Spinal Discopathy model?
The Simulator and Spinal Discopathy model is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations and after-sales support come directly from the manufacturer.

How do I request a quotation for this spine model?
Send the product code SCL257/029, the quantity and your delivery location in India or abroad through the contact page. ScienceLab quotes the Simulator and Spinal Discopathy model for institutions, dealers and importers.

Request a Quote

Request a quotation for the Simulator and Spinal Discopathy model via the contact page, or add it to the enquiry cart. Quotes come straight from the manufacturer in Ambala.

Last updated: 24 September 2026

Glass-Ceramic Heating Plate (Product Code: SCL259/030) is an electric laboratory hot plate used to heat beakers, flasks and other flat-bottomed vessels in school, college and research laboratories. Its 175 × 175 mm acid-resistant glass-ceramic tile reaches a maximum of 600 °C on a 700 W rating, giving chemistry and biology benches a flame-free heat source. The plate is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Glass-Ceramic Hot Plate Used For?

Typical jobs include evaporating solutions to recover crystals, warming reagents, boiling water for plant and food experiments, and heating water baths or sand trays. As a piece of chemistry lab equipment for schools in India, it removes the open flame of a burner, which suits crowded classrooms and experiments near flammable liquids.

The smooth, acid-resistant tile tolerates the odd spill, but let it cool before wiping it clean. Use vessels with flat bottoms for even contact, lift hot glassware with tongs, and remember that the surface stays hot for some time after switching off. Keep volatile solvents well away from the plate while it is in use.

What to Specify When Ordering

• Your mains supply voltage and plug type, as only the 700 W power rating is listed.
• The number of plates required per laboratory or bench.
• The vessel sizes you plan to heat, so they suit the 175 × 175 mm plate.
• The delivery location in India or abroad.

OEM Manufacturer

Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, is the OEM (original equipment manufacturer) of the Glass-Ceramic Heating Plate and builds it at its own licensed factory at Saha, Ambala, Haryana, India. It is recorded as an MSME enterprise with manufacturing as its major activity under Udyam registration UDYAM-HR-01-0003714, while overseas consignments are handled under its DGFT Importer-Exporter Code AAECJ8618A. Replacement parts and repeat orders can be discussed directly with the manufacturer.

Learn more on the ScienceLab company profile.

Related Laboratory Equipment

Items commonly used with, or instead of, this heating plate:

• Laboratory Advanced Ceramic Hot Plate — another ceramic-surface option for comparison.
• Advanced Ceramic Hot Plate Magnetic Stirrer — adds stirring when solutions must be mixed while heating.
• Glass Beaker — flat-bottomed vessels for heating on the plate.
• Beaker Tongs — for lifting hot beakers safely off the surface.

Explore the Laboratory Equipment category for more heating apparatus.

Frequently Asked Questions

What is the maximum temperature of the Glass-Ceramic Heating Plate?
The Glass-Ceramic Heating Plate (SCL259/030) reaches a maximum temperature of 600 °C and is rated at 700 W. This is ample for boiling, evaporating and warming tasks in school and college laboratories.

What size is the heating surface?
The Glass-Ceramic Heating Plate has a 175 × 175 mm acid-resistant glass-ceramic tile. Flat-bottomed beakers and flasks that sit fully on this area heat most evenly; tell us your vessel sizes if you are unsure.

What supply voltage does the heating plate need?
The listing for the Glass-Ceramic Heating Plate states a 700 W power rating but not the supply voltage. Please tell us your mains voltage and plug type through the contact page so we can confirm a suitable version.

How should the glass-ceramic surface be cleaned?
Switch off the Glass-Ceramic Heating Plate and let it cool completely, then wipe the acid-resistant tile with a damp cloth and mild detergent. Avoid abrasive pads and never pour cold water onto the hot surface.

Is a calibration certificate available for the hot plate?
Calibration-certificate availability for the Glass-Ceramic Heating Plate should be discussed with us before ordering. Mention the requirement in your enquiry and we will confirm what documentation can be provided with the plate you are quoted.

Who manufactures the Glass-Ceramic Heating Plate?
The Glass-Ceramic Heating Plate is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its licensed factory in Saha, Ambala, Haryana, India. Quotations, spares and repeat orders are handled by the manufacturer itself.

Can you supply the heating plate in bulk or for export?
Yes, the Glass-Ceramic Heating Plate can be quoted in multiple units for schools, colleges, laboratories, dealers and importers in India and international markets. Include the product code SCL259/030, quantity, voltage and destination in your enquiry.

Request a Quote

Send your requirement for the Glass-Ceramic Heating Plate through the contact page or add it to the enquiry cart. Quotations come direct from ScienceLab as the manufacturer.

Last updated: 24 September 2026

Centered Magnifier for Insects (Product Code: SCL261/031) is a hand-held insect viewer used to hold and magnify live insects and other small specimens during school biology lessons and outdoor nature study. Acrylic lenses with a 45 mm lens diameter give 3x and 6x magnification, and the ABS body weighs only 54 g, so even young learners can carry it on field walks. ScienceLab — Jain Scientific Equipments Pvt Ltd (ScienceLab) — makes it as an OEM manufacturer at its own factory in Ambala, India.

Specifications

What Is the Insect Magnifier Used For?

Students gently place a beetle, ant, spider or caterpillar inside the viewer, close it and look through the lenses. The 3x view shows the whole animal and how it moves, while the 6x view brings out legs, wings, antennae and body segments for drawing and identification. The specimen can be released unharmed where it was found once the observation is complete.

The same viewer works for seeds, soil animals, flowers and leaf surfaces, making it a flexible companion to an insect collection kit for school field work. Keep the viewer out of strong direct sun so the specimen does not overheat, avoid overcrowding it with several animals, and wipe the acrylic lenses with a soft dry cloth to prevent scratches.

What to Specify When Ordering

• The number of viewers, for example one per student or one per pair.
• Whether the 3x and 6x magnification of this model meets your lesson needs.
• Any catching equipment, such as nets or catch sets, to be quoted together.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of the Centered Magnifier for Insects. The viewer is made at the company’s own licensed factory at Saha, Ambala, Haryana, India, and reaches schools, nature clubs, dealers and importers directly from the manufacturer, so quotations and repeat class sets come from a single source.

Read the ScienceLab company profile for company details.

Related Laboratory Equipment

These items help students find, catch and study insects:

• Insect Catch Set — equipment for collecting specimens to place in the viewer.
• Insect Net, Economy — a sweep net for catching flying and grass-dwelling insects.
• Bug Box, Gridded — a viewing box with a grid for estimating specimen size.
• Hand Magnifier — a hand lens for examining plants and larger specimens.

More items are available in the Laboratory Equipment category.

Frequently Asked Questions

What magnification does the Centered Magnifier for Insects give?
The Centered Magnifier for Insects (SCL261/031) gives 3x and 6x magnification through acrylic lenses with a 45 mm lens diameter. The lower power shows the whole insect, and the higher power reveals finer body details.

How big and heavy is the insect viewer?
The Centered Magnifier for Insects measures 75 × 61 × 61 mm (2.95 × 2.4 × 2.4 in) and weighs 54 g. Its small size and light weight make it easy for students to hold and carry outdoors.

What is the insect magnifier made of?
The Centered Magnifier for Insects has an ABS plastic body with acrylic lenses. Both materials are lightweight and suitable for handling by students in the classroom and in the school garden; clean the lenses with a soft dry cloth.

Can live insects be kept in the viewer?
Yes, the Centered Magnifier for Insects is intended for short observations of live insects and small animals. Keep it out of hot sun, observe one animal at a time, and release the specimen where it was found after the lesson.

Who manufactures the Centered Magnifier for Insects?
The Centered Magnifier for Insects is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Class-set quotations and repeat orders come directly from the manufacturer.

How do I order class sets of the insect viewer?
For class sets of the Centered Magnifier for Insects, send the product code SCL261/031, the quantity and the delivery location in India or abroad through the contact page. We quote schools, dealers and importers.

Request a Quote

Ask for a quotation on the Centered Magnifier for Insects through the contact page, or add it to the enquiry cart. The quote comes direct from ScienceLab, the manufacturer.

Last updated: 24 September 2026

Tape Meter (Product Code: SCL263/032) is a 2 m soft-grip measuring tape used to measure lengths, heights and distances in school science, maths and field-study activities. Teachers and students use it wherever a ruler is too short, and it has a metallic housing with a yellow finish that stands out on a crowded bench. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as a routine item on any school lab instruments list.

Specifications

What Is the 2 m Measuring Tape Used For?

In the laboratory, the tape measures pendulum lengths, ramp and track distances for motion experiments, and the height of plants in growth investigations. In maths and physical education it records student heights, jump distances and the perimeter of classroom objects, while field trips use it to mark out small survey plots.

For reliable results, keep the tape straight and taut, start exactly at the zero mark, and read the scale at eye level. Guide the tape back into the housing rather than letting it run freely, and wipe it dry after outdoor use so the metallic housing and markings stay in good condition.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies the Tape Meter from Ambala, Haryana, India to schools, colleges, dealers and project buyers in India and international markets. We source it for customers who want their measuring tools on the same quotation as their other laboratory items, which simplifies ordering for new or upgraded labs.

Find out more about the company on the ScienceLab company profile.

Related Laboratory Equipment

Other measuring tools often ordered alongside the Tape Meter:

• Tape, Measure, 5 m, Retractable — a longer tape for sports fields and corridors.
• Fiberglass Tape Measure — a flexible tape for curved surfaces and outdoor work.
• Meter Scale — a rigid scale for straight-line bench measurements.
• Metal Ruler — for short, precise measurements and drawing straight lines.

See the Laboratory Equipment category for more items.

Frequently Asked Questions

How long is the Tape Meter?
The Tape Meter (SCL263/032) has a measuring length of 2 m. That covers most bench, classroom and student-height measurements; for longer distances, a 5 m tape from our catalogue can be quoted alongside it.

What is the housing of the Tape Meter made of?
The Tape Meter has a metallic housing with a soft grip and a yellow finish. The grip makes the tape comfortable to hold while measuring, and the bright colour helps it stand out among other equipment on the bench.

Which units are marked on the tape?
The listing for the Tape Meter gives its 2 m length but does not state the graduation units. If you need metric only or dual metric and imperial markings, please ask us through the contact page before ordering.

Is a calibration certificate available for the Tape Meter?
Calibration-certificate availability for the Tape Meter should be discussed with us before ordering. Mention the requirement in your enquiry and we will confirm what documentation can accompany the tapes you are quoted.

Who supplies the Tape Meter?
The Tape Meter is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. We source the tape and handle quotations and dispatch for schools, colleges, dealers and importers, often together with other lab items.

Can I order the Tape Meter in bulk?
Yes, the Tape Meter can be quoted in class-set or larger quantities for schools, colleges, dealers and importers in India and international markets. Send the product code SCL263/032, the quantity and the delivery location with your enquiry.

Request a Quote

Request pricing for the Tape Meter through the contact page, or add it to the enquiry cart with the rest of your laboratory list.

Last updated: 24 September 2026

Compass 1 (Product Code: SCL265/033) is a 100 mm round magnetic compass used to find direction relative to the Earth's magnetic poles in school physics and geography lessons. Its large silver dial marked with the cardinal points and its well-balanced needle let a whole group read it at once, which suits teacher demonstrations. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as physics lab equipment for India and abroad.

Specifications

What Is the 100 mm Magnetic Compass Used For?

In physics, a compass is the simplest detector of a magnetic field. Set Compass 1 on the bench, let the needle settle along the north–south line, then bring a magnet or a current-carrying wire close and watch the needle swing. Moving it step by step around a bar magnet lets students mark the field direction at each point and join the marks into field lines — a classic magnetism experiment for school labs in India. The 100 mm dial is easy to read from a short distance, so a teacher can show the effect to a small group first.

In geography and outdoor lessons it introduces bearings: hold the compass level, turn it until the North mark lines up with the needle, and read off the direction of a landmark. Take readings away from steel benches, stored magnets and electrical cables, and keep the compass flat in a drawer so the balanced needle is not jarred.

OEM Manufacturer

Compass 1 is produced by Jain Scientific Equipments Private Limited, which trades as ScienceLab, at its own licensed factory in Saha, Ambala, Haryana. As the OEM, the company makes and assembles the compass itself rather than buying it in from a trader, so schools, colleges, dealers and importers deal directly with the source. Repeat orders and replacement units are handled by the manufacturer as well — ask us about current availability. Read more on the ScienceLab company profile.

Related Laboratory Equipment

Items teachers use alongside a large demonstration compass in magnetism and direction lessons:

• Bar Magnet (Plastic) — the field source students map with the compass
• Plotting Compass, Single Glass Face — small compasses for tracing field lines point by point on paper
• Compass. — a smaller compass for pupils' individual sets
• Magnetic Compass Needle — a pivoted needle that shows how a free magnet settles north–south

See more teaching apparatus in Laboratory Equipment.

Frequently Asked Questions

What is the diameter of Compass 1?
Compass 1 has a 100 mm round body with a silver dial showing the cardinal points. The larger size makes the needle and markings easier to read at a glance, which helps during teacher demonstrations and group work in school labs.

What is the needle of Compass 1 mounted in?
The well-balanced needle of Compass 1 is mounted in an aluminium case with a glass top. The listing also names plastic and stainless steel among its materials, so ask us if you need the material of each part confirmed before ordering.

Can Compass 1 be used to trace magnetic field lines?
Yes. Compass 1 responds to any nearby magnetic field, so moving it around a bar magnet and noting the needle direction at each point reveals the field pattern. For fine plotting on paper, many teachers add small plotting compasses alongside it.

Who manufactures Compass 1?
Compass 1 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Schools, dealers and importers buy it direct from the maker, and repeat orders are handled by the same company.

How should Compass 1 be stored and handled?
Store Compass 1 flat, away from magnets, steel shelving and electrical equipment, which can disturb the needle. Handle it gently so the balanced needle is not knocked, and wipe the glass top with a soft, dry cloth after use.

Is a calibration certificate available for Compass 1?
Compass 1 is a teaching compass for direction-finding and magnetism experiments. If your institution needs any calibration or test document with the order, please raise it through our contact page before ordering so we can tell you what can be provided.

What details are needed for a Compass 1 quotation?
For a Compass 1 quotation, tell us the quantity, the product code SCL265/033, your delivery location in India or abroad, and any other magnetism items you want on the same order. Bulk supply for schools, dealers and importers is quoted directly.

Request a Quote

To order Compass 1, send your quantity and delivery details through our contact page or add it to the enquiry cart. Quotations come direct from the manufacturer in Ambala for schools, colleges, dealers and importers in India and international markets.

Last updated: 24 September 2026

Entomological Networks (Product Code: SCL267/034) is a hand-held insect net used to catch flying and crawling insects for observation and study during school biology fieldwork. A 30 cm metal ring holds open a polyester net with a 40 cm mesh length, carried on a plastic stick, so pupils can sweep grass or follow a butterfly in flight. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and fits naturally into an insect collection kit for schools.

Specifications

What Is the Insect Net Used For?

Field biology starts with a sample, and this net is how most school groups collect one. Sweeping it in slow arcs through long grass and low shrubs gathers beetles, bugs, grasshoppers and spiders for a biodiversity count, while a quick upward swing takes butterflies and dragonflies in flight. After each catch, a turn of the wrist folds the polyester net over the metal ring so nothing escapes while the insect is moved to a viewing box.

Teachers often split a class into teams, one net per team, and compare what each habitat — lawn, hedge or pond edge — yields. Shake debris out of the net between sweeps, let it dry before storage, and release living insects where they were found once they have been observed and recorded.

OEM Manufacturer

ScienceLab is the trade name of Jain Scientific Equipments Private Limited, the OEM that builds this insect net at its own licensed factory in Saha, Ambala, Haryana. The ring, net and handle are put together by the company itself, and nets go out factory-direct to schools, colleges, institutions, dealers and importers. Buyers who need vendor registration details can use GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Learn more on the company profile.

Related Laboratory Equipment

After the net, these items take a field catch through viewing, identification and mounting:

• Plastic Container with a Magnifying Glass Lid for Collecting Insects, Insects, etc. — holds a live catch under a magnifying lid
• Centered Magnifier for Insects — a compact viewer for examining small insects
• Entomological Needles — pins for mounting specimens kept for a collection
• Insect Mount Set — mounted reference specimens to help pupils identify what they catch

Browse the full range in Laboratory Equipment.

Frequently Asked Questions

What size is the Entomological Networks insect net?
The Entomological Networks insect net has a 30 cm diameter metal ring and a polyester net with a 40 cm mesh length, fixed to a plastic stick. This size suits pupils catching butterflies, grasshoppers and other common insects on school field trips.

Why is the product called Entomological Networks?
Entomological Networks is the catalogue name for an entomological, or insect-collecting, net; “networks” here simply means nets. The item is a single hand-held net with a metal ring, polyester netting and a plastic handle for fieldwork.

How do students catch insects with Entomological Networks without harming them?
With Entomological Networks, sweep smoothly, then turn the handle so the net folds over the metal ring and closes the opening. Tip the insect gently into a viewing container instead of grabbing it by hand, and release it after observation where possible.

Who manufactures Entomological Networks?
Entomological Networks is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools and dealers order direct from the maker, and questions about spare nets or repeat batches go to the same team.

How should Entomological Networks be cared for after fieldwork?
After use, shake leaves and soil out of the Entomological Networks net, rinse off mud if needed and let the polyester dry fully before storing. Check the net for snags before each trip, since a small tear lets insects escape.

What should a quotation request for Entomological Networks include?
For an Entomological Networks quotation, give the quantity, product code SCL267/034 and delivery location, and list any collecting items such as pins or viewing containers you want on the same order. We quote schools, dealers and importers in India and international markets.

Request a Quote

Planning field trips for several classes? Send the number of nets through our contact page or place them in the enquiry cart, and the manufacturer will quote you directly for supply within India or abroad.

Last updated: 24 September 2026

Entomological Needles (Product Code: SCL269/035) are metal insect pins used to mount and display insect specimens in school and laboratory collections. Biology teachers and students use them when preserving field catches; the pins are listed as chemical resistant and carry a coloured enamel finish. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for departments putting together an insect collection kit for schools.

Key Details

What Are Entomological Needles Used For?

A pinned insect collection lets students compare body plans, wing types and mouthparts long after the field trip is over. Each specimen is held on its own needle, pushed vertically through the thorax — usually slightly to the right of the midline — so the legs and wings stay visible and a small data label can sit on the same pin below the insect. The pinned specimen is then set into a soft base in a closed collection box.

Extra needles are also used as temporary braces: when butterfly or moth wings are spread for drying, they hold paper strips in place until the specimen sets. Handle the pins with forceps rather than fingers so they do not bend, keep them in a closed container between lessons, and count them back in after class, since they are sharp.

Supplier

Entomological Needles are supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. The company sources the pins for schools, colleges and laboratories, so a biology department can add them to the same order as nets, viewing containers and magnifiers from the ScienceLab range. More about the company is on the ScienceLab profile page.

Related Laboratory Equipment

Items that complete an insect-mounting workflow, from catching to storage:

• Entomological Networks — the net used to collect insects in the first place
• Insect Pin Holder — a wooden holder that keeps pins sorted on the bench
• Dissecting Tray with Wax — a wax base into which specimens can be pinned while they dry
• Insect Mount Set — finished mounted specimens that show pupils the target result

For more teaching items, visit Laboratory Equipment.

Frequently Asked Questions

What are Entomological Needles made of?
Entomological Needles are metallic pins with a coloured enamel finish, and they are listed as chemical resistant. They are intended for use in laboratories and schools for mounting insect specimens in collection boxes and display trays.

What sizes are Entomological Needles available in?
The current listing for Entomological Needles does not state pin lengths or thicknesses. Please tell us the size or type of specimen you are pinning through our contact page, and we will confirm what can be supplied before quoting.

How is an insect pinned with Entomological Needles?
An Entomological Needle is pushed straight down through the insect's thorax, slightly right of the midline, and then set into a soft base so the specimen sits at an even height with its label beneath. Using forceps keeps the pin from bending.

Are Entomological Needles safe for younger pupils?
Entomological Needles are sharp metal pins, so a teacher should hand them out, supervise their use and collect them afterwards. Keep them in a closed box or pin holder between lessons and count them back in at the end of each class.

Who supplies Entomological Needles?
Entomological Needles are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company can add them to the same order as insect nets, viewing containers and magnifiers for school and college biology departments.

What should a quotation request for Entomological Needles include?
For an Entomological Needles quotation, give the quantity, product code SCL269/035, any size preference and the delivery location. Schools, dealers and importers in India and international markets can request pricing through our contact page or the enquiry cart.

Request a Quote

To request Entomological Needles, send the quantity and any size requirement through our contact page or add the item to the enquiry cart. We respond to schools, colleges, dealers and importers in India and international markets.

Last updated: 24 September 2026

Chemical Cups with Different Pupils (Product Code: SCL271/036) are graduated low-form glass beakers used to hold, mix, heat and roughly measure liquids in school and college chemistry labs. The listing covers four capacities — 50, 100, 250 and 500 ml — so one order can equip a bench for small tests as well as larger preparations. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as chemistry lab glassware for India and export.

Specifications

What Are Low-Form Glass Beakers Used For?

Beakers are the workhorses of the chemistry bench: pupils dissolve salts to make solutions, run neutralisation and precipitation reactions, collect filtrate under a funnel and warm liquids over a burner. The low shape gives a wide, stable base and an open mouth that is easy to stir and pour from. The printed scale shows approximate volumes for mixing; when a practical calls for an exact volume, measure it in a cylinder or pipette first and then pour it in.

Choosing sizes is simple: the 50 ml beaker suits indicator and small-scale tests, 100 ml is a handy individual size, 250 ml covers most routine practicals, and 500 ml works as a water bath or for preparing a class batch of solution. For a practical beaker set for schools in India, many labs order all four. Heat beakers on a wire gauze rather than in a bare flame, never heat them empty, and lift hot glass with tongs.

What to Specify When Ordering

• Which capacities you need: 50, 100, 250 or 500 ml, or all four
• How many of each capacity per bench or per lab
• Whether measuring cylinders, tongs or tripods should be quoted on the same order
• Delivery location in India or abroad

OEM Manufacturer

These beakers come from Jain Scientific Equipments Private Limited, known in the trade as ScienceLab, which works as an OEM from its own licensed factory at Saha, Ambala, Haryana. Buying from the manufacturer means one point of contact for mixed-capacity orders, top-up quantities for a new term and breakage replacements — simply ask us what you need. Visit the company profile for background on the business.

Related Laboratory Equipment

Equipment that works with graduated beakers in everyday chemistry practicals:

• Glass Cylinders with Different Pupils — measuring cylinders for accurate volumes before pouring into a beaker
• Beaker Tongs — for lifting hot beakers safely
• Gauze Wire — spreads the flame's heat under a beaker
• Tripod Stand 200mm — supports the gauze and beaker over a burner
• Alcohol Lamp — a small flame source for warming beaker contents

Explore more in Laboratory Equipment.

Frequently Asked Questions

What capacities do Chemical Cups with Different Pupils come in?
Chemical Cups with Different Pupils are listed in 50 ml, 100 ml, 250 ml and 500 ml capacities, all as graduated low-form glass beakers. “Different pupils” in the catalogue name refers to these different sizes, so tell us which ones you need.

Can Chemical Cups with Different Pupils be heated?
Yes. Chemical Cups with Different Pupils are listed as heat resistant and chemical resistant. For safe heating, place the beaker on a wire gauze over a tripod, warm it gradually, never heat it empty, and handle hot glass with beaker tongs.

Are the graduations on these beakers accurate enough for measuring?
The scale on Chemical Cups with Different Pupils gives approximate volumes, which is ideal for mixing, dissolving and preparing solutions. For experiments that need an exact volume, measure the liquid in a measuring cylinder or pipette and then transfer it to the beaker.

Who manufactures Chemical Cups with Different Pupils?
Chemical Cups with Different Pupils are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers are supplied directly by the maker.

Is a calibration certificate available for these beakers?
Chemical Cups with Different Pupils are general-purpose graduated beakers for teaching labs. If your institution requires a calibration or test document, please discuss it with us through the contact page before ordering so we can confirm what is possible.

How do I get a quotation for Chemical Cups with Different Pupils?
To get a quotation for Chemical Cups with Different Pupils, send the capacities, the quantity of each, product code SCL271/036 and your delivery location. We quote single schools as well as bulk orders for dealers and importers in India and international markets.

Request a Quote

List the beaker sizes and quantities you need on our contact page, or add this item to the enquiry cart. Because you are dealing with the manufacturer, the quotation comes straight from our Ambala team.

Last updated: 24 September 2026

Glass Cylinders with Different Pupils (Product Code: SCL273/037) is a set of five graduated glass measuring cylinders used to measure liquid volumes in school and college science labs. The set runs from 10 ml to 250 ml — 10, 25, 50, 100 and 250 ml — and every cylinder stands on a durable plastic base, so students can pick the size closest to the volume they need. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Measuring Cylinder Set Used For?

Measuring cylinders are how students get a known volume of liquid for a practical: preparing a solution of set strength, adding a fixed amount of acid in a rate experiment, or finding the volume of an irregular stone by displacement for a density calculation. Having five sizes matters because precision depends on using the smallest cylinder that will hold the volume — a few millilitres are measured far more precisely in the 10 ml cylinder than in the 250 ml one. This makes the set a practical choice for any measuring cylinder requirement in schools across India.

For a correct reading, stand the cylinder on a level bench, bring your eye level with the liquid and read the bottom of the curved meniscus. Add the last few drops with a dropper. The glass is listed as heat and chemical resistant, but cylinders are measuring vessels, so do not heat them over a flame.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the original equipment manufacturer of this cylinder set and produces it at its own licensed factory in Saha, Ambala, Haryana. Institutions and distributors receive the sets factory-direct, and if a single cylinder in a set breaks, ask us about a replacement piece rather than re-buying the whole set. See the ScienceLab profile for more about the company.

Related Laboratory Equipment

Items used with a measuring cylinder set when preparing and transferring liquids:

• Chemical Cups with Different Pupils — graduated beakers that receive the measured liquid
• Dropper — adds the final drops to bring the level to the mark
• Glass Funnel — helps pour into the narrow cylinders without spills
• Wash Bottle LDPE with Narrow Mouth — for rinsing cylinders and topping up with water

More items are listed under Laboratory Equipment.

Frequently Asked Questions

Which sizes are in the Glass Cylinders with Different Pupils set?
The Glass Cylinders with Different Pupils set contains five glass measuring cylinders: 10 ml, 25 ml, 50 ml, 100 ml and 250 ml. “Different pupils” in the catalogue name refers to these different volumes, which cover most school practicals.

What is the base of each cylinder made of?
Each cylinder in Glass Cylinders with Different Pupils sits on a durable plastic base. The base gives the glass a steady footing on the bench, which matters when students are reading a meniscus at eye level.

How do students read Glass Cylinders with Different Pupils accurately?
To read Glass Cylinders with Different Pupils accurately, place the cylinder on a level surface, bring your eye level with the liquid and read the bottom of the meniscus. Use the smallest cylinder that holds the volume for the most precise result.

Can hot liquids go into Glass Cylinders with Different Pupils?
Glass Cylinders with Different Pupils are listed as heat and chemical resistant, so warm solutions can be measured. They are not meant to be heated over a flame, though; heat liquids in a beaker and measure them in the cylinder.

Who manufactures Glass Cylinders with Different Pupils?
Glass Cylinders with Different Pupils is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Orders and replacement enquiries go directly to the maker.

Is a calibration certificate supplied with Glass Cylinders with Different Pupils?
Glass Cylinders with Different Pupils is a teaching-lab measuring set. If your tender or quality system needs a calibration or test document, please discuss it with us through the contact page before ordering, and we will confirm what can be arranged.

Request a Quote

Tell us how many five-piece sets you need and where they should be delivered through the contact page, or add the set to the enquiry cart. You will receive a quotation directly from the manufacturer for supply within India or to international markets.

Last updated: 24 September 2026

Proof Clips (Product Code: SCL275/038) is a wooden test tube holder used to grip a test tube while it is hot or whenever the tube should not be touched by hand during school chemistry and biology practicals. Students use it most when heating a tube over a flame, and its wooden construction keeps fingers clear of the hot glass. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as basic chemistry lab equipment for schools in India.

Key Details

What Is a Wooden Test Tube Holder Used For?

Heating a test tube is one of the first practical skills pupils learn, and a holder makes it safe. Clip the holder near the mouth of the tube, tilt the tube so its open end points away from everyone, and move the bottom gently through the flame so the contents warm evenly instead of bumping. The same grip is useful for decomposing a salt, warming a food-test mixture, or holding a tube whose outside is wet with a corrosive reagent.

Keep the wooden holder itself out of the flame, let it cool before it goes back in the drawer, and store it dry. A holder is for one tube at a time; stand the tube in a rack as soon as heating is finished.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), the OEM behind Proof Clips. Production takes place at the company's licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414), and holders are dispatched from there to schools, dealers and importers without a middle trader. Read the company profile to learn more.

Related Laboratory Equipment

Items used together with a test tube holder during heating practicals:

• Test Tubes (With Rim) — glass tubes to hold and heat
• Alcohol Lamp — a small flame for heating the tube
• Container Holder — a wooden rack to stand tubes upright after heating
• Test Tube Holder, Metal — an alternative holder with a spring clip
• Brush Test Tube — for cleaning tubes once they have cooled

Find more items in Laboratory Equipment.

Frequently Asked Questions

What is Proof Clips?
Proof Clips is a wooden test tube holder; “proof” in the catalogue name is a translation of the word for test tube. It grips a single test tube so students can heat it or handle it without touching the glass directly.

What material is Proof Clips made from?
Proof Clips is made of wood. Wood stays comfortable to hold near a flame because it does not conduct heat the way metal does, which is why wooden holders are common in school laboratories for heating test tubes.

How should a test tube be held with Proof Clips during heating?
With Proof Clips, grip the test tube near its mouth, tilt it away from yourself and others, and move the lower part gently through the flame. Never point the open end at anyone, and keep the wooden holder out of the flame.

What test tube sizes does Proof Clips fit?
The listing for Proof Clips does not state a tube diameter range. Tell us the size of test tubes your lab uses through our contact page, and we will confirm the fit before sending a quotation.

Who manufactures Proof Clips?
Proof Clips is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Schools and distributors buy direct from the maker, which also handles repeat orders.

Can Proof Clips be ordered in bulk for a whole school?
Yes. Proof Clips can be quoted in class-set or bulk quantities for schools, dealers and importers in India and international markets. Send the quantity, product code SCL275/038 and delivery location, and add any test tubes or racks you need.

Request a Quote

For Proof Clips, use our contact page or the enquiry cart to tell us the quantity and destination. The quotation is prepared directly by the manufacturer in Ambala.

Last updated: 24 September 2026

Plastic Container with a Magnifying Glass Lid for Collecting Insects, Insects, etc. (Product Code: SCL277/039) is a bug-viewing box used to hold live insects and small natural objects for close observation in primary science and nature study. Its double-sided glass lid carries a 6X lens, and three small holes let air in for living bugs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and suits a junior lab kit for primary school.

Specifications

What Is a Magnifying Bug Container Used For?

Young children learn most about insects when they can watch them up close without holding them. A beetle, ant or caterpillar from the school garden goes into the box, the lid goes on, and the 6X lens shows legs, antennae, body segments and wing veins while the animal moves naturally. Pupils can sketch what they see, count legs to decide whether it is an insect or a spider, and then let it go. The same box turns sand grains, small shells and bits of rock into a mini investigation on a rainy day.

Keep occupied boxes out of direct sun, since a closed container warms up quickly, and limit observation to a short session before releasing the animal where it was found. Wash the container with mild soapy water and dry the lens with a soft cloth so it stays clear.

OEM Manufacturer

This magnifying container is an in-range product of Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, and is produced as an OEM item at its own licensed factory at Saha, Ambala, Haryana. Pre-schools, primary schools, science clubs and resellers can order straight from the factory, and larger class quantities are planned with the manufacturer directly. Company background is on the ScienceLab profile.

Related Laboratory Equipment

Tools that pair with a magnifying bug box on a nature walk or in the classroom:

• Entomological Networks — an insect net for catching specimens to observe
• Lupa Dore — a large hand magnifier for scanning leaves, bark and soil
• Centered Magnifier for Insects — a smaller viewer for individual pupils
• Plastic Container — another insect viewing box with a magnifying lid

See the wider range in Laboratory Equipment.

Frequently Asked Questions

What magnification does the lid of this insect container give?
The Plastic Container with a Magnifying Glass Lid has a double-sided glass lid with a 6X magnification lens. That is enough for children to see legs, antennae and wing detail on common garden insects without any other equipment.

How big is the Plastic Container with a Magnifying Glass Lid?
The Plastic Container with a Magnifying Glass Lid measures 190 x 130 x 130 mm. The roomy box gives beetles, caterpillars and similar insects space to move, and it can also hold sand, shells or small rock samples.

Can live insects be kept in the container?
Yes, for short observation sessions. The Plastic Container with a Magnifying Glass Lid has three small ventilation holes that let air reach living bugs. Keep it out of direct sun and release the insect where it was found after the lesson.

Who manufactures the Plastic Container with a Magnifying Glass Lid?
The Plastic Container with a Magnifying Glass Lid is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is supplied factory-direct to schools and resellers.

What age group is this bug viewer suited to?
The Plastic Container with a Magnifying Glass Lid is designed as a fun bug catcher for children, so it suits pre-school and primary nature study. Older pupils also use it for quick field observations before moving on to hand lenses and microscopes.

How can a school order this container in quantity?
To order the Plastic Container with a Magnifying Glass Lid in quantity, send the number of boxes, product code SCL277/039 and your delivery address through the contact page. We quote schools, dealers and importers in India and international markets.

Request a Quote

Ask for a price by adding this bug viewer to the enquiry cart or writing to us via the contact page. Quotations are issued directly by the manufacturer.

Last updated: 24 September 2026

Alcohol Lamp (Product Code: SCL279/040) is a round borosilicate glass spirit lamp used to provide a small, steady flame for heating test tubes, warming solutions and flaming small tools in school and college labs. It holds 150 ml of fuel and comes with a cap for covering the burner between uses, which makes it handy where no gas supply is fitted. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for any school lab setup in India.

Specifications

What Is an Alcohol Lamp Used For?

An alcohol lamp is the simplest heat source in a teaching lab. Pupils use it to warm a test tube held in a holder, to heat a small beaker of water on a gauze and tripod, to evaporate a few drops of solution and see crystals form, and in microbiology to flame an inoculating loop before and after use. Because it needs no gas line or electricity, it also travels well to classrooms and field stations.

Borosilicate glass has a low coefficient of expansion, so the lamp copes with the warmth of its own flame. Fill it only when it is cold and unlit, away from other flames, and wipe off any spilt fuel before lighting. To put the flame out, place the cap over it rather than blowing, and keep the cap on during storage to limit evaporation.

OEM Manufacturer

The Alcohol Lamp is glassware made by Jain Scientific Equipments Private Limited, which does business as ScienceLab and operates as an OEM from its own licensed factory in Saha, Ambala, Haryana. Labs and distributors receive their lamps directly from the maker, and replacement caps or extra lamps for a growing lab can be requested from the same team — just ask. The company profile has more details.

Related Laboratory Equipment

Everything needed to heat safely with a spirit lamp:

• Proof Clips — a wooden holder for gripping a test tube over the flame
• Alcohol Burner Stand — supports glassware above a small burner
• Gauze Wire — spreads the heat evenly under a beaker
• Chemical Cups with Different Pupils — graduated beakers for warming small volumes
• Glass Spirit Lamp — another spirit lamp option in the range

More heating and bench items are in Laboratory Equipment.

Frequently Asked Questions

What is the capacity of the Alcohol Lamp?
The Alcohol Lamp holds 150 ml of fuel in a round borosilicate glass body. That gives a useful burning time for a typical school practical session without frequent refilling, though actual time depends on the flame size.

Why is the Alcohol Lamp made of borosilicate glass?
The Alcohol Lamp uses borosilicate glass because it has a low linear coefficient of expansion and a high annealing point. In practice this helps the lamp tolerate the warmth of its own flame better than ordinary soda-lime glass.

How do you put out the Alcohol Lamp safely?
Put out the Alcohol Lamp by gently placing its cap over the flame, which cuts off air; never blow it out. Leave the lamp to cool before refilling, and refill only when no other flame is nearby.

What is the cap of the Alcohol Lamp made of?
The original listing for the Alcohol Lamp describes it as having a “plasma cap”, and the cap material is not stated more clearly. If the cap material matters for your lab, ask us through the contact page and we will confirm it.

Who manufactures the Alcohol Lamp?
The Alcohol Lamp is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order it directly from the maker.

What information is needed to quote the Alcohol Lamp?
To quote the Alcohol Lamp, we need the number of lamps, product code SCL279/040, the delivery location and whether you want holders, gauze or stands on the same order. We supply institutions and resellers in India and international markets.

Request a Quote

Send your Alcohol Lamp requirement through the contact page or add it to the enquiry cart. The manufacturer replies with a direct quotation for bench-by-bench or bulk quantities.

Last updated: 24 September 2026

Lupa Dore (Product Code: SCL281/041) is a large hand magnifier used to enlarge leaves, insects, rocks, fabric and fine print for close observation in classrooms and science labs. Its wide 150 mm diameter and gentle 2X magnification give a big, forgiving field of view, and the plastic handle makes it easy for young pupils to hold or pass around a group. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as biology lab equipment for schools in India.

Specifications

What Is a Large Hand Magnifier Used For?

A wide, low-power magnifier is often the first optical instrument children use. With Lupa Dore held between the eye and the object, pupils can trace the veins of a leaf, count the segments of an earthworm, compare sand grains from different places or look at the texture of cloth and paper. Because the 2X lens is so broad, two or three children can look at once, and the image stays steady even when small hands are not perfectly still — ideal for nursery and primary science corners.

For a sharp view, hold the object in good light and move the magnifier slowly towards or away from it until the detail comes into focus. Never look at the sun through the lens, and do not leave it lying in sunlight, where it can focus heat onto paper or a desk. Clean the lens with a soft cloth only.

OEM Manufacturer

Lupa Dore is manufactured by Jain Scientific Equipments Private Limited, which uses the ScienceLab name, at its own licensed factory in Saha, Ambala, Haryana. As the OEM, the company makes the magnifier itself rather than reselling another firm’s stock, and schools, institutions, dealers and importers can order direct from the factory without an agent. More about the business is on the company profile.

Related Laboratory Equipment

Other observation tools that go well with a large hand magnifier:

• Plastic Container with a Magnifying Glass Lid for Collecting Insects, Insects, etc. — keeps a live insect still under a stronger lens
• Hand Magnifier — a compact magnifier for individual pupils
• Pjata Petri — a glass dish for holding small specimens under the lens
• Microscope for Dissection — the next step when more magnification is needed

Discover more in Laboratory Equipment.

Frequently Asked Questions

What does the name Lupa Dore mean?
Lupa Dore means “hand magnifier” in the language of the original catalogue. The product is a hand-held magnifier with 2X magnification, a 150 mm diameter and a plastic handle for everyday observation work in schools.

What is the magnification and size of Lupa Dore?
Lupa Dore magnifies 2X and has a 150 mm diameter. The low power combined with the large diameter gives a wide field of view, so whole leaves, shells or insects can be seen at once rather than a tiny area.

Which age groups is Lupa Dore suitable for?
Lupa Dore suits pre-school, primary and middle-school pupils because its broad, low-power view is easy to use without training. Older students often start with it before moving to hand lenses of higher power or a dissection microscope.

Is Lupa Dore safe to use outdoors?
Lupa Dore is safe for outdoor nature study with sensible care: never look at the sun through it and never leave it in direct sunlight, because any magnifying lens can focus sunlight enough to scorch paper or start a fire.

Who manufactures Lupa Dore?
Lupa Dore is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Orders from schools, dealers and importers are handled directly by the maker.

How do I request a quotation for Lupa Dore?
To request a quotation for Lupa Dore, send the quantity, product code SCL281/041 and delivery location through our contact page. We quote single classrooms and bulk orders for India and international markets.

Request a Quote

Add Lupa Dore to the enquiry cart or message us from the contact page with the number you need. Your quotation comes directly from the manufacturer in Ambala.

Last updated: 24 September 2026

Container Holder (Product Code: SCL283/042) is a wooden test tube stand used to keep test tubes upright and in order during experiments, while results develop and before the tubes are washed. It has 12 holes in a brown wooden body, enough for a full row of comparison tests on one bench. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and is a practical test tube rack for school labs in India.

Specifications

What Is a Wooden Test Tube Rack Used For?

Many school practicals are really a line of test tubes compared side by side: food tests for starch, sugar and protein, indicator colours across acids and bases, or the effect of temperature on a reaction. A 12-hole rack lets a group set out every tube in a fixed order, label the positions, add reagents one tube at a time and read the results together at the end. It also gives a safe resting place for a tube that has just been warmed, since wood does not draw heat away the way metal does.

Wipe drips and spills from the wood straight away, especially acids and dyes, and let the rack dry fully after cleaning. Keep it on a level bench, and fill it from one end so it does not tip when only a few tubes are in place.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714) that produces this wooden rack as the OEM at its own licensed factory in Saha, Ambala, Haryana. Export shipments are handled under Importer-Exporter Code AAECJ8618A (DGFT), so overseas buyers can source it directly as well. See the company profile for more.

Related Laboratory Equipment

Items that complete a test tube workstation:

• Test Tubes (With Rim) — glass tubes to fill the rack
• Proof Clips — a wooden holder for gripping a tube during heating
• Dropper — adds reagents drop by drop to each tube
• Brush Test Tube — cleans tubes before they return to the rack
• Test Tube Rack With Drying Pegs — an alternative rack with pegs for drying washed tubes

Browse related apparatus in Laboratory Equipment.

Frequently Asked Questions

How many test tubes does Container Holder hold?
Container Holder has 12 holes, so it holds up to 12 test tubes upright at once. That is enough for a complete set of comparison tests or for two groups sharing one rack on a bench.

What is Container Holder made of?
Container Holder is made of wood with a brown finish. Wood is light, stable on the bench and comfortable to handle, and it does not conduct heat quickly, which helps when warm tubes are placed in the rack.

Which test tube diameters fit Container Holder?
The listing for Container Holder gives the number of holes but not their diameter. Tell us the size of test tubes you use through our contact page, and we will confirm the fit before quoting.

Why is it called Container Holder?
Container Holder is the catalogue name for a wooden test tube stand. Although the name is general, the item itself is a 12-hole brown wooden rack designed to hold test tubes in school and college laboratories.

Who manufactures Container Holder?
Container Holder is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, dealers and importers buy it directly from the maker.

What should I include when requesting a Container Holder quotation?
When requesting a Container Holder quotation, include the number of racks, product code SCL283/042, your test tube size and the delivery location. We quote schools and colleges as well as dealers and importers in India and international markets.

Request a Quote

Equipping several benches? Tell us how many racks you need through the contact page or add Container Holder to the enquiry cart, and the manufacturer will send a direct quotation.

Last updated: 24 September 2026

Dropper (Product Code: SCL285/043) is a straight glass dropper with a rubber bulb used to transfer small amounts of liquid drop by drop in laboratory work. Students use it to add indicator to a flask, place a drop of water on a slide or bring a cylinder up to the mark; its glass is listed as chemical and heat resistant. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its chemistry lab glassware range.

Specifications

What Is a Glass Dropper Used For?

Whenever a practical says “add a few drops”, a dropper is the right tool. It delivers indicator into an acid–base titration flask, iodine or other test reagents into food-test tubes, stain onto a specimen, and a single drop of water onto a slide for a wet mount. In physics and chemistry it is also the easiest way to finish filling a measuring cylinder or flask to a line without overshooting.

Squeeze the bulb before dipping the tip into the liquid, then release slowly to draw it up. Hold the dropper upright when dispensing so the drops come out evenly, and never lay it on its side while it still holds liquid, as the liquid will run into the rubber. Rinse it between different reagents, or keep one dropper per reagent, to avoid cross-contamination.

OEM Manufacturer

Jain Scientific Equipments Private Limited, whose brand is ScienceLab, is the OEM for this dropper and turns it out at its own licensed factory at Saha, Ambala, Haryana. Because droppers are needed in every practical group, schools and distributors usually order them in quantity, and those orders are quoted and packed by the manufacturer itself — ask us for the numbers you need. See our company profile.

Related Laboratory Equipment

Items that are often used with a glass dropper:

• Dropper Bottle — a glass bottle with its own dropper for storing indicators
• Scaled Pipettes — for measured volumes rather than single drops
• Lama — glass microscope slides that receive a drop for a wet mount
• Lamela — cover slips placed over the drop on the slide
• Container Holder — a wooden rack for the test tubes you add drops to

View the full range under Laboratory Equipment.

Frequently Asked Questions

What is the Dropper made of?
The Dropper is a straight glass tube with a rubber bulb, described in the original listing as a rubber hood. The glass is listed as chemical resistant and heat resistant, suiting everyday laboratory reagents and solutions.

Is the Dropper graduated, and what volume is one drop?
The listing for the Dropper does not mention graduations or a fixed drop volume. For a measured volume, use a graduated pipette; if you need a marked dropper, ask us through our contact page about what can be supplied.

Can the Dropper be used with hot or strong solutions?
The glass of the Dropper is listed as heat and chemical resistant. The rubber bulb is the more delicate part, so avoid drawing liquid up into it, and replace the bulb if it hardens, cracks or becomes sticky.

How do you keep the Dropper from contaminating reagents?
To stop the Dropper contaminating reagents, rinse it with distilled water between liquids or keep a separate dropper for each reagent bottle. Never return unused liquid from the dropper to the stock bottle.

Who manufactures the Dropper?
The Dropper is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers can buy directly from the maker.

What is needed for a Dropper quotation?
For a Dropper quotation, send the quantity, product code SCL285/043 and the delivery location, plus any dropper bottles, pipettes or slides you want on the same order. We supply institutions and resellers in India and international markets.

Request a Quote

Tell us how many droppers you need via the contact page or the enquiry cart. Quotations for single labs and bulk supply come straight from the manufacturer.

Last updated: 24 September 2026

Scaled Pipettes (Product Code: SCL287/044) are graduated glass pipettes used to measure and transfer chosen volumes of liquid up to 10 ml in chemistry and biology practicals. The scale along the stem lets one pipette deliver many different volumes within its range, and the glass is listed as chemical and heat resistant. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India — a lab glassware manufacturer in India supplying schools, colleges and dealers.

Specifications

What Is a 10 ml Graduated Pipette Used For?

A graduated pipette sits between a measuring cylinder and a burette in precision. Students use it to dispense set volumes of acid or alkali in rate-of-reaction experiments, to make up a dilution series from a stock solution, to add enzyme or substrate in biology investigations and to transfer samples for colour comparison. For small volumes it gives a much more exact result than a cylinder, which is why it features in volumetric analysis kits for India's school and college labs.

Always fill the pipette with a pipette filler — never by mouth. Rinse it first with a little of the solution you are about to measure, draw the liquid slightly above the required mark, then let it fall until the bottom of the meniscus sits on the line at eye level. Store pipettes horizontally or in a stand so the tips are not chipped.

OEM Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, makes these pipettes as the OEM at its own licensed factory in Saha, Ambala, Haryana. Colleges and schools that go through pipettes quickly can place repeat orders with the same manufacturer each term, and dealers and importers receive stock direct from the factory rather than through a chain of traders. Details are on the company profile.

Related Laboratory Equipment

Accessories and glassware used alongside a graduated pipette:

• Pipette Filler — draws liquid up safely without mouth suction
• Bulb Type, Pipette Filler — a valve-bulb alternative for controlled filling
• Pipette Stand — stores pipettes safely between uses
• Pipettes (Pipes) Scaled with Different Students — graduated pipettes listed in other capacities
• Chemical Cups with Different Pupils — beakers to draw from and dispense into

For more, see Laboratory Equipment.

Frequently Asked Questions

What capacity are Scaled Pipettes?
Scaled Pipettes have a 10 ml capacity and are graduated along the stem, so a single pipette can measure any volume within that range. They are made of glass listed as chemical resistant and heat resistant.

How should Scaled Pipettes be filled safely?
Scaled Pipettes should always be filled with a pipette filler or bulb, never by mouth. Draw the liquid a little above the mark, then release it slowly until the bottom of the meniscus rests on the required graduation.

When should a Scaled Pipette be used instead of a dropper or cylinder?
Use a Scaled Pipette when you need a measured volume of up to 10 ml more exactly than a measuring cylinder allows. A dropper only delivers unmeasured drops, while a cylinder is better suited to larger, less precise volumes.

What is the graduation interval of Scaled Pipettes?
The listing for Scaled Pipettes confirms that they are graduated but does not state the interval between marks. If the division size matters for your experiment, ask us through the contact page and we will confirm it.

Who manufactures Scaled Pipettes?
Scaled Pipettes are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order them directly from the maker.

Is a calibration certificate available for Scaled Pipettes?
Scaled Pipettes are graduated teaching-lab pipettes. If your institution or tender requires a calibration or test document, please discuss it with us before ordering through the contact page so we can advise what can be provided.

Request a Quote

Send the number of pipettes and your delivery details through our contact page, or add them to the enquiry cart. Quotations for India and international markets come directly from the manufacturer.

Last updated: 24 September 2026

Pjata Petri (Product Code: SCL289/045) is a round, clear glass Petri dish with lid used to grow microbial cultures, germinate seeds and hold specimens for observation in biology and microbiology labs. It measures 100 mm across and 20 mm high, and its glass is listed as heat and chemical resistant, so the dish can be washed and reused. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a glass Petri dish for labs in India and overseas.

Specifications

What Is a Glass Petri Dish Used For?

In school microbiology, a Petri dish filled with agar shows pupils that invisible microbes are everywhere: swab a hand before and after washing, streak the plate, and colonies appear after incubation. The same dish lined with damp filter paper becomes a seed germination chamber, and an empty one holds pond water, small invertebrates, crystals or dissected parts for viewing under a magnifier. The clear glass lets students see growth without lifting the lid.

Label the base rather than the lid, incubate agar plates upside down so condensation does not drip onto the culture, and tape the lid closed on cultured plates so they are not opened in class. Because the glass is heat resistant, the dishes can go through the washing and heat-sterilising routine that a college microbiology lab normally uses before reuse.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades under the ScienceLab name, is the OEM for Pjata Petri and makes the dishes at its own licensed factory in Saha, Ambala, Haryana. Microbiology departments, schools, dealers and importers can order direct from the producer, and quantity breaks or breakage top-ups are arranged with the same team — send us your requirement. The company profile tells you more.

Related Laboratory Equipment

Items used together with glass Petri dishes in culture and observation work:

• Agar Block — agar for preparing the culture medium poured into the dish
• Alcohol Lamp — for flaming loops before streaking a plate
• Dropper — adds drops of sample or water to the dish
• Lupa Dore — a large hand magnifier for examining colonies and seedlings
• Watch Glass — a smaller glass dish for evaporating or holding tiny samples

More items are listed in Laboratory Equipment.

Frequently Asked Questions

What size is Pjata Petri?
Pjata Petri is a round glass Petri dish measuring 100 mm in diameter and 20 mm in height. It is supplied with a lid, making it suitable for agar cultures, seed germination and specimen observation in school and college labs.

What does Pjata Petri mean?
Pjata Petri is the catalogue name taken from the original listing language and simply means “Petri dish”. The product is a clear, round glass Petri dish with lid, 100 mm in diameter.

Is Pjata Petri reusable?
Yes. Pjata Petri is made of glass listed as heat resistant and chemical resistant, so it can be cleaned and sterilised by the usual laboratory methods and used again, unlike single-use plastic dishes. Handle it carefully, as dropped glass can chip or break.

Does Pjata Petri come with a lid?
Yes, Pjata Petri is accompanied by a lid. The lid keeps airborne contamination out of cultures and slows evaporation, and on agar plates it should be taped shut once the dish has been inoculated in a school lab.

Who manufactures Pjata Petri?
Pjata Petri is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Institutions and resellers buy it directly from the maker.

How can I get a quotation for Pjata Petri?
For a Pjata Petri quotation, send the number of dishes, product code SCL289/045 and your delivery location through the contact page. We quote labs, schools, dealers and importers in India and international markets.

Request a Quote

Add Pjata Petri to the enquiry cart or contact us from the contact page with your quantity. Every quotation is prepared directly by the manufacturer in Ambala.

Last updated: 24 September 2026

Air Thermometer 1 (Product Code: SCL295/048) is a white plastic, spirit-filled thermometer used to measure air and room temperature in laboratories, classrooms and outdoor weather studies. It reads from -30 °C to +50 °C and shows both °F and °C scales, and its non-toxic spirit fill makes it a sensible choice around children. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as laboratory equipment for schools in India and abroad.

Specifications

What Is an Air Thermometer Used For?

An air thermometer records the temperature of the surroundings rather than of a liquid. In the lab it logs the room temperature that should be noted alongside results in reaction-rate, solubility or enzyme practicals. For geography and environmental science, pupils can place it in a shaded spot outdoors and record readings at the same times each day to build a weather log; the range down to -30 °C covers cold winter mornings as well as hot afternoons.

The dual scale also makes a ready-made teaching aid for converting between Celsius and Fahrenheit. For a true air reading, keep the thermometer out of direct sun and away from heaters, lamps and open doors, give the spirit column a few minutes to settle after moving it, and read the scale at eye level.

OEM Manufacturer

Air Thermometer 1 is a product of Jain Scientific Equipments Private Limited, trading as ScienceLab, which acts as the OEM and assembles it at its own licensed factory in Saha, Ambala, Haryana. Schools and colleges get manufacturer-direct supply, while dealers and importers can plan repeat consignments with the same source — tell us your volumes. Find out more on the company profile.

Related Laboratory Equipment

Other instruments for temperature and weather observation:

• Laboratory Thermometer 1 — a glass thermometer for measuring liquids and reactions
• Air Thermometer — a glass alternative for room readings
• Digital Hygrometer - Thermometer — adds a humidity reading to a weather log
• Indoor/Outdoor Thermometer — compares inside and outside temperatures

See the complete list in Laboratory Equipment.

Frequently Asked Questions

What temperature range does Air Thermometer 1 cover?
Air Thermometer 1 reads from -30 °C to +50 °C and carries both °F and °C scales. The range suits room monitoring in labs as well as outdoor readings in cold and hot weather.

What liquid is inside Air Thermometer 1?
Air Thermometer 1 is a non-toxic spirit-filled thermometer, so it contains no mercury. That makes it a practical choice for classrooms and school weather stations where younger pupils handle the equipment.

Can Air Thermometer 1 be used outdoors?
Yes. Air Thermometer 1 has a white plastic body and a range from -30 °C to +50 °C, suitable for outdoor weather observations. Place it in the shade and away from walls that absorb sunlight to get a true air temperature.

Can Air Thermometer 1 measure the temperature of liquids?
Air Thermometer 1 is intended for air and room temperature. To measure liquids, reactions or water baths, use a glass laboratory thermometer that can be immersed, such as Laboratory Thermometer 1 from the same catalogue.

Who manufactures Air Thermometer 1?
Air Thermometer 1 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Orders from schools, dealers and importers go directly to the maker.

Is a calibration certificate available for Air Thermometer 1?
Air Thermometer 1 is a teaching and general-purpose thermometer. If your institution needs a calibration or test document, please discuss it through our contact page before ordering so we can confirm what can be provided.

Request a Quote

Request pricing for Air Thermometer 1 through the contact page or by adding it to the enquiry cart. Please include the quantity and destination; the quotation comes from the manufacturer directly.

Last updated: 24 September 2026

Laboratory Thermometer 1 (Product Code: SCL297/049) is a graduated glass alcohol thermometer used to measure the temperature of liquids and reactions in school and college laboratories. It is listed in two ranges, 0–50 °C and -10 to 100 °C, so a lab can choose closer readings around room temperature or a scale that spans melting ice to boiling water. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as physics practical equipment for CBSE and other schools.

Specifications

What Is a Laboratory Thermometer Used For?

A laboratory thermometer is dipped into the thing being measured. With the -10 to 100 °C version, students can follow the temperature of melting ice, plot a heating curve as water comes to the boil, or record a cooling curve for a Newton's law of cooling experiment. The 0–50 °C version spreads its scale over a narrower span, which suits work near room temperature such as enzyme activity, dissolving salts, or keeping a water bath steady.

For an accurate reading, immerse the bulb fully without letting it touch the sides or bottom of the container, stir the liquid gently, wait for the column to stop moving and read at eye level. Support the thermometer in a clamp rather than resting it in a beaker, never use it as a stirring rod, and keep it within its range.

What to Specify When Ordering

• Which range you need: 0–50 °C or -10 to 100 °C
• The quantity of each range, for example for different practicals
• Delivery location in India or abroad

OEM Manufacturer

The thermometer is produced by Jain Scientific Equipments Private Limited — ScienceLab to its customers — as an OEM at its own licensed factory at Saha, Ambala, Haryana. Buyers therefore get both ranges from one maker, with quotations, repeat orders and replacement enquiries handled by the company itself rather than through resellers; ask us about quantities. Background on the company is on the ScienceLab profile.

Related Laboratory Equipment

Items used with a laboratory thermometer in heat and reaction experiments:

• Thermometer Clamp — holds the thermometer at a fixed depth in the liquid
• Chemical Cups with Different Pupils — beakers for heating and cooling water samples
• Alcohol Lamp — a simple heat source for heating-curve practicals
• Laboratory Thermometer — another glass alcohol thermometer listing
• Air Thermometer 1 — for recording room temperature alongside results

Explore Laboratory Equipment for more.

Frequently Asked Questions

What ranges is Laboratory Thermometer 1 available in?
Laboratory Thermometer 1 is listed in two ranges: 0–50 °C and -10 to 100 °C. Both are graduated glass alcohol thermometers, so specify the range, or the quantity of each, when you request a quotation.

Which range of Laboratory Thermometer 1 should a school choose?
Choose the -10 to 100 °C Laboratory Thermometer 1 for heating and cooling curves, melting ice and boiling water. Choose the 0–50 °C version for room-temperature work such as enzyme or solubility practicals, where a narrower scale is easier to read closely.

What liquid does Laboratory Thermometer 1 contain?
Laboratory Thermometer 1 is an alcohol thermometer, so the column is alcohol rather than mercury. This makes it well suited to school labs, where a broken thermometer should not release mercury onto benches or floors.

How do you take an accurate reading with Laboratory Thermometer 1?
Immerse the bulb of Laboratory Thermometer 1 fully in the liquid without touching the container, stir gently, wait until the column stops moving and read at eye level. Clamp the thermometer instead of leaning it in the beaker.

Who manufactures Laboratory Thermometer 1?
Laboratory Thermometer 1 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order directly from the maker.

Is a calibration certificate available for Laboratory Thermometer 1?
Laboratory Thermometer 1 is a graduated teaching thermometer. If your lab or tender requires a calibration or test document, please discuss it with us through the contact page before ordering so we can confirm what is possible.

Request a Quote

State the range and quantity you need on our contact page or add Laboratory Thermometer 1 to the enquiry cart. The manufacturer will reply with a direct quotation for India or international delivery.

Last updated: 24 September 2026

Glass Stirrer (Product Code: SCL299/050) is a straight glass rod used to stir, mix and dissolve substances in beakers and flasks in school, college and research laboratories. At 350 mm long and 8 mm in diameter, it reaches the bottom of deep vessels, and its glass is both chemical resistant and heat resistant. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of chemistry lab glassware, at its own factory in Ambala, India.

Specifications

What Is the Glass Stirrer Used For?

In practical chemistry the stirring rod does several everyday jobs: dissolving a salt or sugar in water, mixing two reagents during a precipitation reaction, and guiding a liquid down its length into a funnel so the mixture does not splash while it is filtered. Because the glass is chemical resistant, it can go into the dilute acids, alkalis and salt solutions found in school chemistry lab equipment sets. Its heat resistance lets students keep stirring a warm solution while they wait for crystals to form.

Stir with a gentle circular motion instead of knocking the rod against the vessel wall, which can chip thin beakers. Rinse it with distilled water before moving to a different solution so no traces are carried across, and rest it across a clock glass rather than on a bare bench.

OEM Manufacturer

ScienceLab is the original equipment manufacturer (OEM) of this Glass Stirrer. ScienceLab is the trading name of Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), and the rods are produced at the company's licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala, Haryana (Factory Licence AMB-ONLINE-CHD-J-414). Schools, colleges, dealers and importers buy directly from the maker instead of a trader, and repeat orders go straight back to the same production team. Read more on our company profile.

Related Laboratory Equipment

Items used alongside the stirrer for mixing and filtration work:

• Glass Beaker — the usual vessel in which solutions are stirred and dissolved
• Funnels — a 75 mm glass funnel to receive liquid poured down the rod
• Filter Paper 1 — 125 mm circles for lining the funnel during filtration
• Glass Stirrer (Agitator) — another stirring rod listing in the same range

Browse the full Laboratory Equipment category for more bench apparatus.

Frequently Asked Questions

What are the dimensions of the Glass Stirrer?
The Glass Stirrer (SCL299/050) is 350 mm long with a diameter of 8 mm. The length lets it reach the bottom of tall beakers and flasks, and the 8 mm rod gives a firm grip for routine stirring and pouring.

Can the Glass Stirrer be used with warm or corrosive solutions?
Yes, within normal laboratory use. The Glass Stirrer is chemical resistant and heat resistant, so it can stir warm solutions and common bench reagents. Avoid sudden temperature shocks, such as plunging a hot rod into cold water, which can crack any glass.

Who manufactures the Glass Stirrer?
The Glass Stirrer is manufactured by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, which is the OEM. It is made at the company's own licensed factory in Saha, Ambala, Haryana, India, and quotations are issued by the manufacturer itself rather than a reseller.

How should the Glass Stirrer be cleaned and stored?
Rinse the Glass Stirrer with tap water straight after use, then with distilled water, and let it drain dry. Store it flat in a drawer or tray rather than upright in a beaker where it can tip over, and check both ends for chips before each practical.

Can the Glass Stirrer be ordered in bulk for school labs?
Yes. The Glass Stirrer can be quoted for a single laboratory or for institutional, dealer and export orders to India and international markets. Share the quantity and delivery location through our contact page so the manufacturer can prepare the quotation.

What details are needed for a Glass Stirrer quotation?
For a Glass Stirrer quotation, give the product code SCL299/050, the number of pieces, the delivery address or port, and any other glassware you want on the same order. Send these through the contact page or add the item to the enquiry cart.

Request a Quote

To order the Glass Stirrer, send your quantity and delivery details through our contact page or add it to the enquiry cart. Quotations come direct from the manufacturer in Ambala, so pricing and dispatch questions are answered at source.

Last updated: 24 September 2026

Clock Glass (Product Code: SCL301/051) is a shallow, curved borosilicate glass dish used to cover beakers, evaporate small volumes of liquid and hold solids for weighing in school and college laboratories. Its 70 mm diameter and smooth, glazed finish give a clear view of whatever sits on it, which makes it a small but constant part of borosilicate laboratory glassware in India. The Clock Glass is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Clock Glass Used For?

A clock glass earns its place on the bench through small, frequent tasks. Placed over a beaker, it keeps dust out and stops spattering while a solution is warmed. A few drops of sea water or copper sulphate solution left on it show students the solid that remains once the water evaporates, and crystals forming on the curved surface can be watched through a hand lens.

It also works as a light weighing dish for powders on a balance and as a resting place for a wet stirring rod. The glazed borosilicate surface wipes clean easily; for heating, warm the glass gently over a water bath rather than in a direct flame, and let it cool before washing.

OEM Manufacturer

This Clock Glass is manufactured by ScienceLab, the trading name of Jain Scientific Equipments Private Limited, which acts as the OEM for the product. It is produced at the company's own licensed factory in Saha, Ambala, Haryana, and dispatched factory-direct to schools, colleges, institutions and dealers. Because enquiries reach the maker directly, customers replacing broken glassware or repeating an earlier order can simply ask us. Learn more on the ScienceLab profile page.

Related Laboratory Equipment

Apparatus that is often used together with a clock glass:

• Glass Beaker — the vessel a clock glass most often covers during warming
• Spoon Spatula — for transferring powders onto the glass for weighing
• Glass Stirrer — a 350 mm rod that can rest on the clock glass between uses
• Clock Glass 45mm, 60mm, 70mm — a separate listing covering several diameters

More bench glassware is listed in the Laboratory Equipment category.

Frequently Asked Questions

What size is the Clock Glass?
The Clock Glass (SCL301/051) has a diameter of 70 mm. That size covers small beakers and gives enough surface for evaporating a few drops of solution or weighing a small quantity of powder in school practical work.

What is the Clock Glass made of?
The Clock Glass is made of borosilicate glass with a glazed, smooth finish. Borosilicate is the glass type widely used for laboratory ware because it copes with temperature changes better than ordinary soda glass, and the smooth surface is easy to clean.

Is a clock glass the same as a watch glass?
Yes. Clock glass and watch glass are two names for the same shallow, curved glass dish. This 70 mm Clock Glass from ScienceLab serves the usual watch-glass jobs: covering beakers, evaporating small samples and holding solids for weighing.

Can the Clock Glass be heated?
The borosilicate Clock Glass can be warmed gently, ideally over a water bath or resting over a beaker of hot water. Avoid a direct flame and sudden cooling, because thin curved glass is more likely to crack under uneven heating.

Who manufactures the Clock Glass?
The Clock Glass is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, dealers and importers receive quotations directly from this manufacturer, not through an intermediary trader.

Are other clock glass sizes available?
This listing is the 70 mm Clock Glass. ScienceLab also lists clock glasses in other diameters as separate items; state the diameters and quantities you need on the contact page so a combined quotation can be prepared.

Request a Quote

Send the quantity of Clock Glass you need, with your delivery location, through the contact page, or add the item to the enquiry cart with your other glassware. The quotation is prepared directly by the manufacturer.

Last updated: 24 September 2026

Kuti Per Lama (Product Code: SCL303/052) is a plastic storage box with 25 separate slots, used to keep glass microscope slides apart, organised and protected in biology and microscopy laboratories. Teachers and lab technicians use it to file prepared or student-made slides so that each one sits in its own seat instead of rubbing against its neighbours. The box is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is the Kuti Per Lama Slide Box Used For?

After a microscopy practical, the slides a class has prepared, or a set of permanent slides for biology lessons, need somewhere safe to go. With 25 individual slots, this box lets a teacher store a complete topic set, such as plant tissues or micro-organisms, in one place and pull out exactly the slide needed for the next lesson. Separate seats stop slides sliding into each other, which is how cover slips crack and stained areas get scratched.

Allow mounting fluid to dry before a slide goes into its slot, and keep a numbered list inside the lid so every slide can be found quickly. Store the closed box flat in a dry cupboard, away from direct sunlight that can fade stains over time.

OEM Manufacturer

Kuti Per Lama is produced by ScienceLab as the original equipment manufacturer. Jain Scientific Equipments Private Limited, which trades under the ScienceLab name, makes the box at its own licensed factory in Saha, Ambala, Haryana, and supplies it factory-direct to schools, colleges, laboratories and distributors. Enquiries about additional boxes to match an existing set are handled by the manufacturer itself, so simply ask us. Visit our company profile for background on the business.

Related Laboratory Equipment

Items that go into, or work with, a slide storage box:

• Lama — ground-edge glass slides measuring 25.4 x 76.2 mm
• Lama 1 — ground-edge glass slides measuring 24 x 60 mm
• Series of Microscopic Preparation for Micro Organism — a prepared slide series that benefits from orderly storage
• Biological Microscope — for viewing the slides kept in the box

See the Laboratory Equipment category for more microscopy and biology items.

Frequently Asked Questions

How many slides does Kuti Per Lama hold?
Kuti Per Lama (SCL303/052) has 25 separate slots, so it holds 25 slides, one in each seat. That is enough for a full topic set of prepared slides or for one practical session's worth of student mounts.

What is the Kuti Per Lama box made of?
The Kuti Per Lama slide box is made of plastic. A plastic box is light to carry between the prep room and the classroom and can be wiped clean with a damp cloth if stain or mounting fluid is spilled on it.

Will my slides fit in Kuti Per Lama?
Slot dimensions for Kuti Per Lama are not listed on this page, so tell us the length and width of the slides you use, for example Lama or Lama 1, through the contact page and we will confirm the fit before you order.

Why store slides in separate slots?
Separate slots, as in Kuti Per Lama, keep each slide from touching the next. This protects cover slips and stained specimens from scratches and cracks, and it makes it easy to find and return a particular slide during a lesson.

Who manufactures Kuti Per Lama?
Kuti Per Lama is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Orders and quotations are handled directly by the manufacturer for schools, colleges, dealers and importers.

Can Kuti Per Lama be ordered for several labs at once?
Yes. Kuti Per Lama can be quoted in quantities for one laboratory or for institutional, dealer and export orders to India and international markets. Send the number of boxes and your delivery location through the contact page.

Request a Quote

For a quotation on Kuti Per Lama, share the number of boxes and the slide size you use through our contact page, or place it in the enquiry cart. Quotes come direct from the manufacturer in Ambala.

Last updated: 24 September 2026

Lama 1 (Product Code: SCL305/053) is a clear, rectangular glass slide with ground edges, used as the base for mounting specimens for microscope observation in school, college and teaching laboratories. It measures 24 mm x 60 mm and is chemical resistant, so it tolerates the stains and mounting fluids handled in routine slide preparation for cell biology equipment in India. Lama 1 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications