Creek Laboratory Manufacturer,Supplier and Exporter in India

Creek Laboratory (Product Code: SCI-659/026) is a metal laboratory jack used to raise, lower and hold hot plates, burners, baths and glassware at a set height on the bench in school and college laboratories. Its knob-operated scissor mechanism gives quick, easy and accurate height adjustment, and the listing states that it takes loads over 25 kg. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM laboratory equipment manufacturer in India, at its own factory in Ambala.

Specifications

What Is the Laboratory Jack Used For?

A lab jack replaces the stack of wooden blocks that many benches once relied on. With a flask clamped on a retort stand, the jack brings a hot plate, burner or bath up to meet it and, just as importantly, drops the heat away quickly if a mixture boils too hard. When colleges assemble laboratory distillation apparatus, the jack lets the heat source be adjusted without loosening a single clamp, and in physics work it lifts glassware or small apparatus into line with other equipment.

Stand the jack on a level bench and centre the load on the platform before raising it. Turn the knob smoothly, and support glassware with clamps rather than relying on the jack alone to hold it upright. Stay within the listed load, wipe up spills straight away and keep the scissor joints clean and dry; the powder coating on mild steel jacks lasts longer when acids are not left standing on it.

What to Specify When Ordering

• Construction: stainless steel or powder-coated mild steel.
• Platform size: the catalogue lists the tile as 100 x 10 mm, so confirm it against the base of your hot plate or bath.
• The heaviest item the jack will carry (listed for loads over 25 kg).
• The number of jacks needed per laboratory.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the original equipment manufacturer of this laboratory jack and produces it at its own licensed factory at Saha, Ambala, Haryana. The jack reaches schools, colleges, dealers and importers factory-direct rather than through a trading chain, so questions about construction, replacement knobs or repeat orders go straight to the maker — just ask us. Learn more on the ScienceLab company profile.

Related Laboratory Equipment

A jack is most useful alongside the heat sources and supports it positions:

• Glass-Ceramic Heating Plate — a heat source to raise and lower on the jack.
• Alcohol Lamp 150 ml — a small burner that can be set at the right height under a flask.
• Laboratory Stand with Accessories — clamps the glassware while the jack moves the heat source.
• Distillation Pot with Side Tube — a distillation flask for set-ups where heat needs fine adjustment.
• Laboratory Jack — another lab jack listing in the Laboratory Instruments range.

See the full Laboratory Equipment category for more bench apparatus.

Frequently Asked Questions

What is the Creek Laboratory product?
Creek Laboratory is ScienceLab's listing for a metal laboratory jack: a scissor-action platform that is raised and lowered with a knob. It holds hot plates, burners, baths and glassware at the exact height needed beneath clamped apparatus on the bench.

How much load can the Creek Laboratory jack take?
The Creek Laboratory jack is listed for loads over 25 kg. If you plan to carry a heavy item such as a filled water bath, send its weight through the contact page so we can confirm that the jack suits your set-up before quoting.

Which materials is it made in?
The Creek Laboratory jack is constructed from stainless steel or mild steel, and mild steel jacks are finished with powder coating. State your preferred construction when you request a quotation, especially if the jack will stand near frequent chemical spills.

What are the platform dimensions?
Our catalogue lists the Creek Laboratory jack's platform (tile) dimensions as 100 x 10 mm. Please confirm the platform size with us before ordering, particularly if the jack must carry a hot plate or bath with a wide base.

Who manufactures the Creek Laboratory jack?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Creek Laboratory jack as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy it factory-direct, with quotations coming straight from the manufacturer.

How should the jack be cared for?
Keep the Creek Laboratory jack's scissor joints clean and dry, wipe chemical spills off straight away, and turn the knob smoothly rather than forcing it at the end of its travel. Lowering the jack fully before storage keeps it compact and stable on the shelf.

Can you supply it in bulk or for export?
Yes, the Creek Laboratory jack can be quoted for a single lab or for larger institutional and export orders in India and international markets. List the construction, quantity and delivery location on the contact page, and the manufacturer will send a quotation.

Request a Quote

Quotations for the Creek Laboratory jack come direct from the manufacturer. Send your requirements through the contact page or add the jack to the enquiry cart with any other items you need.

Last updated: 24 September 2026