- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Tripod Stand 200mm
Tripod Stand 200mm (Product Code: SCI-1315/06) is a three-legged laboratory support used to hold beakers, flasks and wire gauze above a burner in school and college laboratories. It stands 200 mm high with a flat triangular top of 125 mm per side, and its legs are bent outwards for a steady footprint, making it a dependable tripod stand for lab heating work. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Top shape | Triangular, flat |
| Length of one side of top | 125 mm |
| Height | 200 mm |
| Top material | Cast iron |
| Leg material | Mild steel, painted |
| Leg design | Zinc-coated legs bent outwards for stability |
| Supports | Glassware such as beakers and flasks during experiments |
| Product code | SCI-1315/06 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 200 mm Tripod Stand Used For?
The tripod is the classic platform for heating over a Bunsen burner. A square of wire gauze goes on the cast iron top, the beaker or flask sits on the gauze, and the burner is placed underneath between the legs. Students use this set-up to boil water, evaporate a salt solution to dryness, dissolve solids in warm water or heat a crucible on a pipe-clay triangle. Its three-legged frame resists downward loads and sideways knocks, so glassware stays level while it is being heated or stirred.
Place the stand on a flat, heat-proof bench and set the burner flame so it reaches the gauze without spreading around the glassware. The top holds heat for some time after the burner is switched off, so move hot vessels with tongs and let the tripod cool before storing it. Paired with a burner and gauze, it is part of the basic physics and chemistry lab equipment every school bench needs.
What to Specify When Ordering
- The height you need — this model is 200 mm tall, and a smaller tripod is also listed.
- Quantity per lab, usually one per heating station.
- Accessories to quote alongside, such as wire gauze, a pipe-clay triangle or a burner.
OEM Manufacturer
This tripod is an original ScienceLab product: Jain Scientific Equipments Private Limited, which trades as ScienceLab, is its OEM and builds it at the company's own licensed factory at Saha, Ambala, Haryana, India. Because the maker sells directly, laboratories, dealers and importers get quotations and replacement stands from the source rather than a reseller. For vendor registration, the company's GSTIN is 06AAECJ8618A1ZT and its LEI is 3358004HRD1JIVXKYX49. Read about the company on the ScienceLab profile page.
Related Laboratory Equipment
A complete heating station around the Tripod Stand 200mm usually includes:
- Gauze Wire — sits on the tripod top and spreads the flame under glassware.
- Bunsen Burner — the heat source placed between the legs.
- Clay Pipe Triangle — holds a crucible securely on the tripod.
- Crucible with lid — for strongly heating small amounts of solids.
- Tripod Stand 50 mm — the smaller tripod in the same range.
More bench apparatus is listed in the Laboratory Equipment category.
Frequently Asked Questions
What are the dimensions of the Tripod Stand 200mm?
The Tripod Stand 200mm is 200 mm high and has a flat triangular top measuring 125 mm on each side. That top is wide enough to carry a square of wire gauze with a beaker or flask standing on it.
What is the Tripod Stand 200mm made of?
The Tripod Stand 200mm has a cast iron top and painted mild steel legs. The legs are zinc coated and bent outwards, which widens the base and keeps the stand steady when glassware is placed on top or stirred.
Do I need wire gauze with the Tripod Stand 200mm?
Usually yes. When heating a beaker or flask on the Tripod Stand 200mm, place wire gauze on the top first so the flame is spread evenly. For heating a crucible, a pipe-clay triangle is used on the tripod instead.
Who manufactures the Tripod Stand 200mm?
The Tripod Stand 200mm is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Orders and quotations are handled directly by the manufacturer, not by a trading agent.
What information is needed to quote the Tripod Stand 200mm?
To quote the Tripod Stand 200mm, we need the product code SCI-1315/06, the quantity, the delivery address and any accessories such as gauze or burners. Send these details through the contact page or add the item to the enquiry cart.
Can the Tripod Stand 200mm be ordered in bulk or for export?
Yes. ScienceLab supplies the Tripod Stand 200mm factory-direct to schools, colleges, institutions, dealers and importers, both in India and in international markets. Mention your quantity and destination when you request a quotation.
Request a Quote
Ask for a quotation on the Tripod Stand 200mm (SCI-1315/06) through our contact page, or add it to the enquiry cart with any accessories you need. You receive the quote direct from the manufacturer.
Last updated: 24 September 2026
