Marked (tarred) Pots 500 ml Manufacturer,Supplier and Exporter in India

Marked (tarred) Pots 500 ml (Product Code: SCI-640/089) is a graduated borosilicate glass pot used to prepare and hold larger batches of solutions or samples in school, college and training laboratories. At 500 ml it carries enough stock solution for a full class or several practical sessions, with clear glass for visibility and a corrugated cap to cover the contents. It is laboratory glassware made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 500 ml Marked Pot Used For?

The 500 ml size is chosen when one batch has to serve a whole class. A lab assistant can weigh the solute into the tared pot, dissolve it and bring the level to the graduation needed before the lesson begins. It is equally handy for collecting water samples in environmental practicals, where the graduations give a rough volume record at the point of collection.

A full 500 ml pot is much heavier than the smaller sizes, so confirm that your balance's maximum load covers the pot plus its contents before weighing by difference, and support the base when carrying it. Chemical resistance suits most routine reagents, and heat resistance tolerates warm solutions, but keep the cap off until the contents have cooled.

What to Specify When Ordering

• Capacity: 500 ml under code SCI-640/089; smaller and larger marked pots are separate listings.
• Number of pots: labs often keep one pot per stock reagent, plus spares.
• Other items: any measuring cylinders or beakers you want quoted in the same order.

OEM Manufacturer

ScienceLab is the trading name used by Jain Scientific Equipments Private Limited, the OEM for the Marked (tarred) Pots 500 ml. Each pot is manufactured at the company's licensed factory in Saha, Ambala, Haryana, India, and sold directly by the maker to educational institutions, laboratories, distributors and importers. Buying from the manufacturer keeps the pattern consistent when a school adds more pots in later years. Read about the company on the ScienceLab profile.

Related Laboratory Equipment

Buyers equipping a solution-preparation bench usually choose these alongside the 500 ml pot.

• Marked (tarred) Pots 250 ml — a smaller pot for single-group quantities.
• Marked (tarred) Pots 1000 ml — the largest listing in this series.
• Measuring Cylinder 500 ml — for measuring water volumes more closely than the pot graduations.
• Chemical Beaker 500 ml — for dissolving and stirring before transfer.
• Hydrated Copper Sulfate 500 g — a typical solid weighed out for class solutions.

More bench glassware is listed in the Laboratory Equipment category.

Frequently Asked Questions

How much does the Marked (tarred) Pots 500 ml hold?
The Marked (tarred) Pots 500 ml, code SCI-640/089, holds 500 ml. It is graduated clear borosilicate glass with a corrugated cap, sized for stock or working solutions that need to last a whole class or several practical sessions.

Will the 500 ml pot fit on a school balance?
The Marked (tarred) Pots 500 ml can be weighed on most bench balances, but the pot plus a full load of liquid adds up quickly. Check your balance's maximum capacity first, and weigh solids into the pot before adding water.

Is the 500 ml pot suitable for holding reagents?
The Marked (tarred) Pots 500 ml is chemical-resistant borosilicate glass, so it can hold most routine laboratory reagents for a session or between lessons. Label it clearly, keep the corrugated cap closed, and store it away from direct sunlight and heat sources.

Who manufactures the Marked (tarred) Pots 500 ml?
The Marked (tarred) Pots 500 ml is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Enquiries, quotations and repeat orders are handled factory-direct by the maker.

Can a calibration certificate be provided?
A calibration certificate for the Marked (tarred) Pots 500 ml is something to discuss with us before ordering, as its graduations are intended for approximate readings. Mention the requirement through the contact page and it will be addressed in our reply.

What information does a quotation need?
To quote the Marked (tarred) Pots 500 ml we need the code SCI-640/089, the number of pots, the delivery address or port, and any other items you want in the same shipment within India or to international markets.

Request a Quote

Ask for pricing on the Marked (tarred) Pots 500 ml through our contact form, or add it to the enquiry cart together with the rest of your list. Quotes are issued directly by the manufacturer.

Last updated: 24 September 2026