Clamp Bar Clamps (Counter Clamp) Manufacturer,Supplier and Exporter in India

Clamp Bar Clamps (Counter Clamp) (Product Code: SCI-635/032) is a metal burette clamp used to hold a burette steady and upright during titrations in school and college chemistry laboratories. It is die-pressed from thick mild steel sheet with self-closing jaws whose ends are covered with rubber, and it opens to a maximum space of 22 mm — a practical burette clamp for India's lab benches. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Burette Clamp Used For?

In a titration the burette must stay vertical above the conical flask while the student swirls the flask and watches for the colour change. This clamp's self-closing jaws grip the burette without a thumb-screw, so it can be slipped out for refilling and dropped back into place in moments, while the rubber-covered ends stop the glass slipping or being scratched. It suits any class running a titration kit in school labs across India, from simple acid-alkali work to redox titrations.

Before starting, check that the burette hangs straight by sighting it against a vertical edge, and read the scale at eye level rather than tilting the clamp. Take the burette out to refill it below eye level, then return it to the jaws. Measure your burette's outside diameter against the 22 mm maximum opening before ordering, and wipe acid or alkali drips off the steel so the clamp keeps working smoothly.

OEM Manufacturer

The Clamp Bar Clamps (Counter Clamp) is made by Jain Scientific Equipments Private Limited, trading as ScienceLab, as the original equipment manufacturer at its own licensed factory at Saha, Ambala, Haryana. Laboratories deal directly with the factory that makes the clamp, and it is supplied to schools, colleges, dealers and importers without a middleman. For replacement clamps or extra titration stations, ask us; the ScienceLab company profile explains more about the company.

Related Laboratory Equipment

A complete titration station also needs these items:

• Burette Clamps with Fasteners — another burette clamp listing in this range.
• Laboratory Stand with Accessories — the stand that carries the titration set-up.
• Burette for Bases 25 ml — a burette for the clamp to hold.
• Conical Flask — receives the titrant below the burette.

Browse the Laboratory Equipment category for more clamps and supports.

Frequently Asked Questions

What is the Clamp Bar Clamps (Counter Clamp)?
Clamp Bar Clamps (Counter Clamp) is ScienceLab's metal burette clamp: a die-pressed mild steel clamp with self-closing, rubber-covered jaws that hold a burette upright for titration. The product name follows our catalogue listing; in use it works as a self-closing burette holder.

What size burette will it hold?
The jaws of the Clamp Bar Clamps (Counter Clamp) open to a maximum space of 22 mm. Measure the outside diameter of your burette; if it falls within 22 mm, the clamp can grip it, with the rubber-covered ends protecting the glass.

Why are the jaw ends covered with rubber?
The rubber-covered jaw ends on the Clamp Bar Clamps (Counter Clamp) cushion the glass and improve grip, so the burette is held firmly without bare metal pressing on it. This reduces the risk of scratching or cracking during repeated titrations.

Who manufactures this burette clamp?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Clamp Bar Clamps (Counter Clamp) as OEM at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy it direct from the factory, and quotations are prepared by the manufacturer.

How should it be looked after?
Wipe the Clamp Bar Clamps (Counter Clamp) dry after titrations, especially if acid or alkali drips onto it, because the mild steel body lasts longer when kept free of spills. Check the rubber on the jaw ends from time to time and ask us about replacements if it wears.

Can I order clamps for a whole lab?
Yes. For a quotation on Clamp Bar Clamps (Counter Clamp), tell us how many titration stations you are equipping, your delivery location and whether stands, burettes or flasks should be included. Schools, colleges, dealers and importers can order in bulk from the manufacturer.

Request a Quote

Send your burette clamp requirements through the contact page or add the Clamp Bar Clamps (Counter Clamp) to the enquiry cart; the quotation comes direct from the manufacturer.

Last updated: 24 September 2026