Simple devices for studying the properties of substances Manufacturer,Supplier and Exporter in India

Simple devices for studying the properties of substances (Product Code: SCI-855/06) is a miniature test-tube assembly used to observe how substances react, change or give off gas in small-scale chemistry practicals. As compact school chemistry lab equipment, it pairs an 8 mm test tube, 50–60 mm long, with an L-shaped glass outlet tube and a one-hole rubber stopper, so each test needs only drops or crystals of reagent. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Simple Device for Studying Substances Used For?

The device lets students run micro-scale tests on a pinch of solid or a few drops of liquid: warming a salt to see whether it melts, changes colour or breaks down, or mixing two reagents and watching for a gas. Any gas or vapour leaves through the L-shaped outlet, which can be dipped into a second tube of limewater or indicator solution to identify it. Working at this scale reduces reagent use, waste and fumes, so each pair of students can do the test themselves instead of watching a demonstration.

Seat the stopper firmly, keep the outlet pointing away from people and hold the small tube in a clip while warming it gently. Before removing the heat, lift the outlet out of any liquid so that the liquid is not sucked back into the hot tube. Handled this way, the set works well as part of a chemistry experiment kit for classes that share a limited stock of reagents.

What to Specify When Ordering

• The number of sets you need, for example one per student pair.
• Any preferred test tube length within the listed 50–60 mm.
• The outlet tube outer diameter within 6–8 mm, if it must match rubber tubing or stoppers you already use.
• Spare rubber stoppers and L-shaped outlet tubes to cover breakage.

OEM Manufacturer

ScienceLab is the OEM (original equipment manufacturer) of the Simple devices for studying the properties of substances: the sets are made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader. ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies schools, colleges, dealers and importers factory-direct, so spare stoppers and outlet tubes can be requested from the maker itself. For tender and vendor registration, the company's GSTIN is 06AAECJ8618A1ZT and its LEI is 3358004HRD1JIVXKYX49. Read more on the ScienceLab company profile.

Related Laboratory Equipment

Items used alongside the small-scale device in the same practicals:

• Rubber stoppers with holes of different diameters — one-hole replacements; confirm the size that suits the 8 mm tube.
• Glass Pipes of Different Diameters — glass tube stock for making up replacement outlet tubes.
• Test Tube Clips — for holding the small tube while it is warmed.
• Alcohol Lamp 150 ml — a gentle flame for micro-scale heating.
• Simple gas appliances that do not dissolve in water — the larger 18 mm set for collecting a gas over water.

Browse more in Laboratory Equipment and Chemistry Lab Equipment.

Frequently Asked Questions

What is included with the Simple devices for studying the properties of substances?
Each set of the Simple devices for studying the properties of substances consists of a test tube 8 mm in diameter and 50–60 mm long, an L-shaped glass tube with an outer diameter of 6–8 mm, and a rubber stopper with a hole that holds the glass tube in the test tube.

Why does the device use such a small test tube?
The Simple devices for studying the properties of substances use an 8 mm test tube so that a test needs only a few drops or a small pinch of chemical. Micro-scale work lowers reagent cost and waste, cuts fumes in the classroom and lets every student pair carry out the experiment.

How should the device be used safely when heating?
When heating with the Simple devices for studying the properties of substances, hold the small tube in a clip, warm it gently, keep the L-shaped outlet pointed away from people and lift the outlet out of any liquid before taking the flame away, so that cold liquid cannot be sucked back.

Who manufactures the Simple devices for studying the properties of substances?
The Simple devices for studying the properties of substances are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and are supplied factory-direct to schools, colleges, dealers and importers.

Can spare stoppers and outlet tubes be ordered?
Spare rubber stoppers and L-shaped glass outlet tubes for the Simple devices for studying the properties of substances can be requested from the manufacturer; list the quantities in your enquiry and we will confirm what can be supplied with your order.

What information does a quotation need?
To quote for the Simple devices for studying the properties of substances, we need the number of sets, any preferred test tube length within 50–60 mm or outlet diameter within 6–8 mm, the spares you want and the delivery destination, sent through our contact page.

Are the sets supplied outside India?
Jain Scientific Equipments Pvt Ltd (ScienceLab) supplies the Simple devices for studying the properties of substances to schools, institutions, dealers and importers in India and international markets; tell us the destination country and quantity when you enquire so that packing and shipping can be quoted.

Request a Quote

For a price on the Simple devices for studying the properties of substances, send your quantity and requirements through the contact page or add the item to the enquiry cart. Quotations come direct from the manufacturer in Ambala.

Last updated: 24 September 2026