Capacitor (Charging and Discharging) (Product Code: SCL-231/036) is a capacitor experiment set used to show how a capacitor charges and discharges through a resistor in school and college physics practicals. It pairs a 1000 µF capacitor with 10 kΩ and 100 kΩ resistors and a 0–20 V DC, 1 A power supply, so students can compare a fast and a slow RC curve with the multimeter. The set is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
| Parameter | Detail |
|---|---|
| Power supply | 0–20 V DC, 1 A |
| Capacitor | Electronic capacitor, 1000 µF |
| Resistors | 10 kΩ and 100 kΩ (listed as 10K and 100K) |
| Measurement | Multimeter |
| Circuit board | Outlet board |
| Connecting wires | 6 pairs, red and black |
| Teaching aid | Capacitor demonstration table for charging and discharging |
| Product code | SCL-231/036 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
Students build a series circuit of the power supply, one resistor and the 1000 µF capacitor on the outlet board, then read the capacitor voltage with the multimeter at regular time intervals while it charges. Disconnecting the supply and letting the capacitor empty through the same resistor gives the discharge curve. Both curves are exponential, and their pace is set by the time constant τ = RC.
With the listed parts, RC works out to about 10 seconds for the 10 kΩ resistor and about 100 seconds for the 100 kΩ resistor, which is slow enough to time by hand. This makes the set a practical electricity experiment kit for school labs: the class can see that a tenfold larger resistance gives a tenfold slower curve. Keep the supply below the voltage marked on the capacitor, observe any polarity markings, and discharge the capacitor through a resistor before handling it.
Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of the Capacitor (Charging and Discharging) set. It is produced at the company’s own licensed factory at Saha, Ambala, Haryana, India, and delivered straight from the factory to schools, colleges, institutions, dealers and importers.
When you need an extra board, spare resistors or a repeat order that matches an earlier supply, the request goes directly to the maker — ask us and we will confirm. The ScienceLab profile explains more about the company.
Items that extend a capacitor and RC-circuit practical:
More electrical apparatus is available in the Laboratory Equipment category.
What is included in the Capacitor (Charging and Discharging) set?
The Capacitor (Charging and Discharging) set includes a 0–20 V DC, 1 A power supply, a multimeter, 10 kΩ and 100 kΩ resistors, a 1000 µF electronic capacitor, an outlet board, six pairs of red and black conducting wires and a capacitor charging and discharging demonstration table.
What time constants can be studied with this capacitor set?
With its 1000 µF capacitor, the Capacitor (Charging and Discharging) set gives a time constant of about 10 seconds with the 10 kΩ resistor and about 100 seconds with the 100 kΩ resistor, so students can compare two clearly different RC curves.
What power supply does the Capacitor (Charging and Discharging) set use?
The Capacitor (Charging and Discharging) set (SCL-231/036) includes its own adjustable power supply rated 0–20 V DC at 1 A. Start at a low voltage and stay within the voltage marked on the capacitor.
How should the capacitor be handled safely?
Before touching the leads of the Capacitor (Charging and Discharging) set, discharge the 1000 µF capacitor through one of the resistors and check with the multimeter that its voltage has fallen. Observe any polarity markings and never exceed the capacitor’s marked voltage.
Who manufactures the Capacitor (Charging and Discharging) set?
The Capacitor (Charging and Discharging) set, code SCL-231/036, is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come directly from the manufacturer.
Can the Capacitor (Charging and Discharging) set be ordered in class quantities?
Yes. ScienceLab quotes the Capacitor (Charging and Discharging) set in class and bulk quantities for schools, colleges and dealers in India and international markets. Share the number of sets and delivery destination through the contact page.
To receive a quotation for the Capacitor (Charging and Discharging) set (SCL-231/036), write to us through the contact page or add it to your enquiry cart. The quotation is issued directly by the manufacturer.
Last updated: 24 September 2026