Straight Coolant (Condenser) Manufacturer,Supplier and Exporter in India

Straight Coolant (Condenser) (Product Code: SCI-135/040) is a straight Liebig-type glass condenser used to turn hot vapour back into liquid during distillation practicals in school and college chemistry laboratories. It is 480 mm long with a transparent glass body, so students can watch droplets form on the inner tube while cooling water flows through the outer jacket. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its chemistry lab glassware range.

Specifications

What Is the Straight Liebig Condenser Used For?

In a simple distillation the condenser is clamped at a gentle downward slope from the side arm of the boiling flask. Cooling water enters at the lower connection and leaves from the upper one, keeping the jacket full, while vapour condenses on the cool inner wall and runs down into a receiver. Teachers use this set-up to recover pure water from a salt solution, to purify a liquid or to show that liquids boil at different temperatures, and the 480 mm length gives the vapour a long cooling path on a standard bench rig.

The same straight condenser can be mounted upright above a flask for simple reflux work, where vapour condenses and drips back so a mixture can be heated for longer without losing solvent. Clamp it near its middle, ease rubber tubing onto the water connections with a little water as lubricant, start the water flow before heating and let the glass cool before dismantling. It is a standard part of distillation apparatus in school and college laboratories across India.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM (original equipment manufacturer) of this straight condenser. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and it goes factory-direct to schools, colleges, institutions, dealers and importers. For vendor registration, the company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Read more on the ScienceLab company profile.

Related Laboratory Equipment

These items complete a bench distillation or reflux set-up built around the straight condenser:

• Distillation Pot with Side Tube — the boiling flask whose side tube feeds vapour into the condenser.
• Adapters (Alunge) — a glass adapter that guides condensate from the condenser outlet into the receiver.
• Rubber Tube (Laboratory) — tubing for the cooling-water inlet and outlet.
• Rubber stoppers with holes of different diameters — for sealing the flask neck around a thermometer or tube.
• Retort Stand — holds the condenser and flask at the right angle.

See the full Laboratory Equipment range for more glassware and bench apparatus.

Frequently Asked Questions

What is the Straight Coolant (Condenser) used for?
The Straight Coolant (Condenser) is used to cool vapour back into liquid during distillation, and it can also serve as a simple reflux condenser. It is a straight Liebig-type glass condenser suited to school and college chemistry practicals where students need to see condensation happening.

How long is the Straight Coolant (Condenser)?
The Straight Coolant (Condenser), product code SCI-135/040, is 480 mm long and made of transparent glass that is listed as heat resistant and chemical resistant. If your set-up needs a particular connection size, please confirm it through the contact page before ordering.

Who manufactures the Straight Coolant (Condenser)?
The Straight Coolant (Condenser) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), its OEM, at the company's own factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and replacement requests are therefore handled directly by the manufacturer.

How is cooling water connected to the Straight Coolant (Condenser)?
On the Straight Coolant (Condenser), connect the water supply to the lower connection and run the outlet from the upper one so the jacket stays full. Start the flow before heating the flask and keep it running until the apparatus has cooled down.

How should the Straight Coolant (Condenser) be cleaned and stored?
Rinse the Straight Coolant (Condenser) after each use, flushing both the inner tube and the water jacket, then let it drain and dry on a rack. Store it flat or clamped away from bench edges, because a long glass condenser is easily knocked and chipped.

What should a quotation request for the Straight Coolant (Condenser) include?
A quotation request for the Straight Coolant (Condenser) should give the code SCI-135/040, the quantity, the delivery location and any matching items such as flasks, adapters or tubing. Send it through the contact page or the enquiry cart and ScienceLab will reply directly.

Can the Straight Coolant (Condenser) be ordered in bulk or for export?
Yes, the Straight Coolant (Condenser) can be quoted in institutional quantities and for dealers and importers, for India and international markets. Share the quantity and destination on your enquiry so ScienceLab can confirm packing and dispatch details for the order.

Request a Quote

To order the Straight Coolant (Condenser), send your quantity and delivery details through the contact page or add it to the enquiry cart. Quotations come direct from the manufacturer, so you deal with the team that makes the condenser.

Last updated: 24 September 2026