- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Tripod Stand 50 mm
Tripod Stand 50 mm (Product Code: SCI-1351/019) is a compact three-legged support used to hold crucibles, evaporating dishes and small beakers above a small flame in school and college laboratories. It has a triangular top of 50 mm per side, legs bent outwards for stability and plastic caps on the leg ends to protect the work surface, a handy tripod stand for small-scale lab work. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Top | Triangular |
| Side length of top | 50 mm |
| Top material (as listed) | Mild steel wire; the listing also mentions a cast iron top — please confirm on quotation |
| Legs | Mild steel, painted; zinc-coated legs bent outwards for stability |
| Leg ends | Covered with plastic caps to avoid scratching the work surface |
| Use | Platform to hold and support glassware during experiments |
| Product code | SCI-1351/019 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 50 mm Tripod Stand Used For?
A small tripod is used for small-scale heating, where a full-size stand would be too wide for the vessel. Typical uses include warming a little solution in a small beaker on a piece of wire gauze over a spirit lamp, heating a crucible on a suitably sized pipe-clay triangle, or evaporating a few drops of a solution in a small dish to recover crystals. The three-legged frame keeps the vessel level and resists being knocked sideways.
The plastic caps on the legs protect polished or laminated bench tops, but they should be kept clear of the flame, so place the heat source centrally under the top. Let the stand cool before moving it, and handle hot crucibles or dishes with tongs. Because the height is not stated in the listing, check that your spirit lamp or burner fits underneath before ordering.
What to Specify When Ordering
- The height you need, since the listing does not state it — ask us to confirm.
- Your preferred top material, as the listing mentions both mild steel wire and cast iron.
- Quantity, plus any gauze, spirit lamps or tongs to quote with the stands.
OEM Manufacturer
The Tripod Stand 50 mm is a ScienceLab product: Jain Scientific Equipments Private Limited, which trades as ScienceLab, is its OEM (original equipment manufacturer) and makes it at the company's own licensed factory at Saha, Ambala, Haryana, India. Because the stand is sold by its maker, buyers get quotations, answers on construction details such as height and top material, and repeat supplies directly from the source — ask us. Company background is on the ScienceLab profile page.
Related Laboratory Equipment
Items that go with the Tripod Stand 50 mm for small-scale heating:
- Glass Spirit Lamp — a small flame source; check its height against the stand.
- Gauze Wire, Ceramic Centre — spreads heat under small glassware.
- Crucible Tong — lifts hot crucibles and dishes off the stand.
- Tripod Stand 200mm — the taller tripod for Bunsen burner work.
Explore the Laboratory Equipment category for more bench apparatus.
Frequently Asked Questions
What size is the top of the Tripod Stand 50 mm?
The Tripod Stand 50 mm has a triangular top measuring 50 mm on each side. It is intended for small vessels such as crucibles, small beakers and evaporating dishes, usually with wire gauze or a pipe-clay triangle on top.
What is the height of the Tripod Stand 50 mm?
The listing for the Tripod Stand 50 mm does not state its height. Please ask us through the contact page to confirm it before ordering, especially if the stand must fit over a particular spirit lamp or burner.
What is the Tripod Stand 50 mm made of?
The Tripod Stand 50 mm is listed with a triangular top of mild steel wire and painted mild steel legs that are zinc coated and bent outwards. The listing also mentions a cast iron top, so confirm the top material when you request a quotation.
Why does the Tripod Stand 50 mm have plastic leg caps?
The lower ends of the Tripod Stand 50 mm legs are covered with plastic caps to avoid scratching the work surface. Keep the caps away from the flame by placing the heat source centrally under the top.
Who manufactures the Tripod Stand 50 mm?
The Tripod Stand 50 mm is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Buyers deal directly with the manufacturer for quotations and repeat orders.
Can the Tripod Stand 50 mm be ordered in bulk or for export?
Yes. ScienceLab supplies the Tripod Stand 50 mm factory-direct to schools, colleges, institutions, dealers and importers in India and international markets. Send the product code SCI-1351/019, the quantity and the destination for a quotation.
Request a Quote
To order the Tripod Stand 50 mm (SCI-1351/019), contact us through the contact page or add it to the enquiry cart. You receive the quotation direct from the manufacturer.
Last updated: 24 September 2026
