Transformer Parts Kit Manufacturer,Supplier and Exporter in India

Transformer Parts Kit (Product Code: SCL-235/033) is a demountable transformer experiment kit used to assemble transformers and demonstrate electromagnetic induction effects in school and college physics laboratories. Its interchangeable coils, from 100 to 1800 turns, fit a U and I core measuring 32 x 25 mm, and two multimeters are included for measuring primary and secondary values. The kit is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Transformer Parts Kit Used For?

The main exercise is building step-up and step-down transformers. Students slide a primary and a secondary coil onto the U core, close it with the I yoke and the tightening plate, apply a low alternating voltage and measure both sides with the two multimeters. Pairing, say, the 300-turn coil with a 600-turn coil gives a 1:2 ratio, and the 900, 1200 and 1800-turn coils extend the range, so the class can check that the voltage ratio follows the turns ratio.

The remaining parts widen this transformer experiment kit for school labs into a full induction set: the solid and slotted sector plates and the aluminium disc show how eddy currents act on conductors, while the vertical support rod with the solid and separate aluminium rings suits ring-repulsion (jumping ring) demonstrations. Always switch off before changing coils, tighten the yoke firmly to reduce hum, and start at the lowest voltage.

What to Specify When Ordering

• Number of kits required for your laboratory or class groups.
• Your mains supply (voltage and frequency) so the power source can be confirmed in the quotation.
• Any spare coils you want, stated by turn count (100, 300, 600, 900, 1200 or 1800).
• Extra 50 cm connecting cables for additional student stations.

OEM Manufacturer

The Transformer Parts Kit is an original ScienceLab product. Jain Scientific Equipments Private Limited, which trades as ScienceLab, is its OEM (original equipment manufacturer): the coils, core parts and hardware are put together at the company’s own licensed factory at Saha, Ambala, Haryana, India, and complete kits go factory-direct to schools, colleges, institutions, dealers and importers.

Buying from the manufacturer means that questions about individual coils, replacement parts or matching earlier orders go to the people who make the kit — ask us and we will check. Company background is on the ScienceLab profile.

Related Laboratory Equipment

Useful alongside the Transformer Parts Kit:

• Demountable Transformer Kit — an alternative demountable set for transformer practicals.
• Demountable Transformer Accessory Set No. 1 — additional accessories for demountable transformer demonstrations.
• Primary and Secondary Coil Set — extra coils for mutual-induction work.
• Digital Multimeter — a third meter for measuring current and voltage at the same time.
• Apparatus for Studying the Production of Electricity by Induction — an introductory induction experiment before transformers.

Browse more in the Laboratory Equipment category.

Frequently Asked Questions

Which coils come with the Transformer Parts Kit?
The Transformer Parts Kit (SCL-235/033) includes coils of 100 turns with wings, 300 turns, 300 turns with wings, two of 600 turns, 900 turns, 1200 turns (listed “with zero”) and 1800 turns, plus a separate copper coil, giving many turns ratios for transformer experiments.

What size is the core in the Transformer Parts Kit?
The Transformer Parts Kit uses a U and I core with dimensions of 32 x 25 mm. The coils fit onto the U section, and the I section, held by the tightening plate and screws, closes the magnetic circuit so the primary and secondary coils are well coupled.

Are meters included in the Transformer Parts Kit?
Yes. The Transformer Parts Kit includes two multimeters, so students can read the primary and secondary sides of an assembled transformer at the same time. Eight connecting cables, each 50 cm long, are also part of the kit.

Can the Transformer Parts Kit demonstrate eddy currents?
Yes. Besides transformers, the Transformer Parts Kit contains a flat sector-shaped plate, a sector plate with cracks (slots) and an aluminium motor disc, which let teachers compare how eddy currents behave in solid and slotted conductors near the energised core.

Who manufactures the Transformer Parts Kit?
The Transformer Parts Kit, code SCL-235/033, is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and replacement-part enquiries are handled by the manufacturer directly.

Can schools and dealers order the Transformer Parts Kit in bulk?
Yes. The Transformer Parts Kit can be quoted in multiple-kit quantities for schools, colleges, dealers and importers in India and international markets. Send your quantity, mains supply details and delivery destination through the contact page.

Request a Quote

For a quotation on the Transformer Parts Kit (SCL-235/033), use our contact page or place it in the enquiry cart. The quote comes direct from the manufacturer in Ambala.

Last updated: 24 September 2026