- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Rubber Stoppers without Holes Of Different Diameters
Rubber Stoppers without Holes Of Different Diameters (Product Code: SCI-204/024) are solid, round rubber stoppers used to close test tubes, small flasks and bottles in school, college and research laboratories. Having no bore, they simply shut the opening, and they come in bottom diameters of 11 mm, 13 mm, 14 mm and 15 mm for storing, shaking and protecting samples. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India serving schools and institutions.
Specifications
| Parameter | Detail |
|---|---|
| Type | Solid stopper, without hole |
| Material | Rubber |
| Shape | Round |
| Chemical resistance | Chemical resistant |
| Bottom diameters available | 11 mm, 13 mm, 14 mm, 15 mm |
| Use | Laboratory |
| Product code | SCI-204/024 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Are Solid Rubber Stoppers Used For?
Solid stoppers do the quiet jobs of a practical class. Students stopper a test tube before shaking it to dissolve a solid or compare solubility, close a tube of collected gas until it is ready for the splint test, and seal small reagent or sample bottles so that dust stays out and evaporation is reduced. They also blank off a spare neck while apparatus is being assembled, which is why technicians keep a box of each size in the preparation room.
Never close a tube or flask with a solid stopper while it is being heated or while a reaction is still giving off gas: pressure builds up and can push the stopper out or crack the glass. Press the stopper in with a slight twist rather than a hard push, and ease it out the same way. If a set-up later needs a tube through the stopper, a hole can be bored with a wetted cork borer.
What to Specify When Ordering
- Bottom diameter(s): 11 mm, 13 mm, 14 mm or 15 mm.
- Quantity of each size for every lab or bench.
- The glassware to be closed, so sizes can be checked against its neck.
- Whether the one-hole version is also needed for delivery tubes and thermometers.
Supplier
Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies these solid rubber stoppers from Ambala, Haryana, to schools, colleges, laboratories, dealers and importers in India and international markets. Buyers comparing rubber stopper options for a lab in India often order the solid and one-hole types together, and both can go on one quotation. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). Company details are on the ScienceLab profile page.
Related Laboratory Equipment
These items are commonly ordered with solid stoppers for storage, sampling and apparatus building:
- Rubber stoppers with holes of different diameters — the one-hole version for delivery tubes and thermometers.
- Test Tube 12 x 100 mm — tubes to be closed; check the neck against the stopper size.
- Cork Drills — for boring a hole in a solid stopper when a set-up needs one.
- Rubber Cork — an alternative range of rubber corks.
More closures and glassware are listed in the Laboratory Equipment category.
Frequently Asked Questions
Do the Rubber Stoppers without Holes Of Different Diameters have a hole?
No. The Rubber Stoppers without Holes Of Different Diameters are solid, with no bore, so they simply close the tube or flask. If you need to pass a glass tube or thermometer through the stopper, order the one-hole rubber stoppers from the same range instead.
Which sizes are available?
The Rubber Stoppers without Holes Of Different Diameters come in bottom diameters of 11 mm, 13 mm, 14 mm and 15 mm. Measure the inside of the neck you want to close and pick the size whose bottom end enters it with the top resting above the rim.
Can a solid stopper close a tube that is being heated?
No. Rubber Stoppers without Holes Of Different Diameters should never close a tube or flask while it is being heated or while a reaction is still releasing gas, because pressure can force the stopper out or crack the glass. Let the contents cool first.
Are they resistant to chemicals?
Yes, the Rubber Stoppers without Holes Of Different Diameters are described as chemical resistant and suit routine school and college reagents. For a specific solvent or a concentrated reagent, send the details through the contact page so ScienceLab can advise before you order.
Who supplies these rubber stoppers?
Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India supplies the Rubber Stoppers without Holes Of Different Diameters. It sources them for schools, colleges, dealers and importers and can price them with the tubes, flasks and tubing on your list.
Can I order a mix of sizes?
Yes. An order for Rubber Stoppers without Holes Of Different Diameters can combine the 11 mm, 13 mm, 14 mm and 15 mm sizes in the quantities you need; list each size and its quantity when you send your quotation request.
Request a Quote
Send the sizes and quantities of Rubber Stoppers without Holes Of Different Diameters through the contact page, or add them to the enquiry cart with the rest of your order, and ScienceLab will reply with a quotation.
Last updated: 24 September 2026
