- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Draining Rack
Draining Rack (Product Code: SCI-1202/01) is a free-standing bench unit with pegs used to drain and air-dry test tubes, beakers, flasks and other glassware after washing in school, college and research laboratories. Made of steel with a polyethylene coating, it has a tray hole and a water outlet hose at the bottom that carry dripping water away instead of letting it spread across the bench. The rack is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Purpose | Drying test tubes, beakers, flasks, glassware and other laboratory supplies |
| Construction | Steel with polyethylene coating |
| Holding | Pegs |
| Drainage | Tray hole and water outlet hose at the bottom |
| Installation | Free-standing bench unit |
| Dimensions (as listed) | Length 80 mm x 600 mm — exact size confirmed in the quotation |
| Product code | SCI-1202/01 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Draining Rack Used For?
After washing, glassware is hung mouth-down on the pegs so that water runs out of it by gravity while air circulates around each item. This lets containers dry faster and be ready for the next practical without being wiped with cloths that could leave fibres behind. The tray hole and outlet hose collect the drips and lead them away, which helps keep the bench and floor dry around a busy washing area.
For a tidy routine, shake off excess water before hanging each item, give a final rinse with distilled water where spotting matters, and direct the outlet hose into a sink or container. The polyethylene coating can be wiped clean with a damp cloth; avoid scraping it with sharp tools. It is a straightforward piece of chemistry lab equipment for school and college washing stations.
What to Specify When Ordering
- The exact rack size you need, since the listed dimension (80 mm x 600 mm) should be confirmed in the quotation.
- Number of racks for your washing areas or laboratories.
- Where the outlet hose will discharge, such as into a sink, so the set-up suits your bench.
OEM Manufacturer
The Draining Rack is manufactured by ScienceLab, the brand of Jain Scientific Equipments Private Limited, which acts as its OEM (original equipment manufacturer). The coated steel rack is produced at the company’s own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, laboratories, dealers and importers.
Ordering from the manufacturer keeps size confirmations and repeat orders simple, because the people who make the rack answer your questions — ask us. Details about the company are on the ScienceLab profile.
Related Laboratory Equipment
Other items for washing and drying laboratory ware:
- Drying Rack — an alternative rack for air-drying glassware.
- Test Tube Rack With Drying Pegs — a smaller bench rack for test tubes.
- Drying Rack Glass & Plastic Ware — for mixed glass and plastic items.
- Containers for Draining Dishes — for draining dishes and smaller ware.
- Drying Cabinet — heated drying when glassware is needed quickly.
See the complete Laboratory Equipment category.
Frequently Asked Questions
What can be dried on the Draining Rack?
The Draining Rack (SCI-1202/01) is designed for drying test tubes, beakers, flasks, other glassware and similar laboratory supplies. Items are hung on its pegs after washing so that water drains out and they dry faster for the next use.
What is the Draining Rack made of?
The Draining Rack is made of steel with a polyethylene coating. This coated steel construction gives a surface that can be wiped clean with a damp cloth; avoid scraping it with sharp tools so the coating stays intact.
How does the Draining Rack deal with dripping water?
The Draining Rack has a tray hole and a water outlet hose at the bottom. Water dripping from the glassware is collected and led away through the hose, which helps prevent liquid from leaking across the bench. Direct the hose into a sink or container.
What size is the Draining Rack?
The listing for the Draining Rack (SCI-1202/01) gives its dimensions as length 80 mm x 600 mm. Please confirm the exact size you require when requesting a quotation through the contact page, so the rack suits your bench space.
Who manufactures the Draining Rack?
The Draining Rack, code SCI-1202/01, is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders are handled directly by the manufacturer.
Can the Draining Rack be ordered in bulk?
Yes. The Draining Rack can be quoted in bulk quantities for schools, colleges, laboratories, dealers and importers in India and international markets. State the number of racks, the size required and the delivery destination when you enquire.
Request a Quote
Request a quotation for the Draining Rack (SCI-1202/01) through our contact page, or add it to the enquiry cart along with other items. Quotes come direct from the manufacturer.
Last updated: 24 September 2026
