- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Separating Funnel (Separator) 125ml
Separating Funnel (Separator) 125ml (Product Code: SCI-169/054) is a spherical, clear glass separating funnel used to split two liquids that do not mix, such as oil and water, in school and college chemistry laboratories. With a 125 ml capacity it suits student-scale solvent extraction, and its faucet (tap) lets the lower layer drain off under control. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Capacity | 125 ml |
| Body shape | Spherical |
| Material | Glass |
| Colour | Clear |
| Fittings | Faucet (tap) and corkscrew, as listed |
| Chemical resistance | Chemical resistant |
| Heat resistance | Heat resistant |
| Product code | SCI-169/054 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 125 ml Separating Funnel Used For?
A typical extraction runs like this: close the tap, pour in the two liquids and fit the stopper, then invert the funnel and open the tap briefly, pointing away from people, to release pressure. Shake gently, vent again, stand the funnel upright in a ring or clamp and let the layers settle. Remove the stopper, then drain the lower layer through the tap into a flask, closing it just as the boundary reaches the tap.
At 125 ml the funnel is sized for student pairs working with small volumes, for example separating an oil layer from water, extracting iodine from an aqueous solution into an organic solvent, or showing how immiscible liquids arrange themselves by density. The spherical body gives a clear view of the interface. Separating funnels are core chemistry lab equipment for school and college practicals in India.
What to Specify When Ordering
- Capacity and code — this listing is the 125 ml separating funnel, SCI-169/054.
- Fittings — the listing gives “faucet and corkscrew”; confirm the tap and stopper type you need.
- Support — a retort stand with a ring or clamp to hold the funnel upright.
- Quantity — for example one per student pair or practical group.
OEM Manufacturer
Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, is the OEM of the Separating Funnel (Separator) 125ml. It is manufactured at the company's own licensed factory at Saha, Ambala, Haryana, India, and reaches schools, colleges, laboratories, dealers and importers factory-direct. Questions about replacement parts, such as a tap or stopper, can go straight to the manufacturer — just ask us. See the ScienceLab company profile.
Related Laboratory Equipment
Items used alongside the separating funnel in an extraction:
- Separating Funnel 500ml — a larger funnel for demonstrations and bigger batches.
- Retort Stand — holds the funnel upright while the layers settle.
- Conical Jar (Erlenmeyer) 250 ml — collects the drained lower layer.
- Glass (75 mm) — a short-tail funnel for filling the separating funnel.
- Safety Goggles — eye protection while shaking and venting.
Find more glassware in the Laboratory Equipment category.
Frequently Asked Questions
What is the Separating Funnel (Separator) 125ml used for?
The Separating Funnel (Separator) 125ml is used to separate two immiscible liquids and to carry out small solvent extractions. After shaking and settling, the lower layer is drained through the tap, leaving the upper layer in the funnel for separate collection.
What capacity and shape is the Separating Funnel (Separator) 125ml?
The Separating Funnel (Separator) 125ml has a 125 ml capacity and a spherical body made of clear glass. The listing describes it as chemical resistant and heat resistant, and fitted with a faucet and corkscrew.
What does “faucet and corkscrew” mean for the Separating Funnel (Separator) 125ml?
For the Separating Funnel (Separator) 125ml, “faucet and corkscrew” is the listing's wording for its fittings: the faucet is the drain tap, and the corkscrew is understood to be the stopper at the neck. Please confirm the exact fittings with us before ordering.
Who manufactures the Separating Funnel (Separator) 125ml?
The Separating Funnel (Separator) 125ml is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory at Saha, Ambala, Haryana, India. Schools and trade buyers deal directly with the manufacturer for quotations and repeat orders.
How do I release pressure in the Separating Funnel (Separator) 125ml?
To release pressure in the Separating Funnel (Separator) 125ml, hold the stopper in place, invert the funnel with the tap pointing up and away from people, and open the tap briefly. Repeat after every few shakes, especially with volatile solvents, while wearing safety goggles.
Can the Separating Funnel (Separator) 125ml be ordered for export?
Yes, the Separating Funnel (Separator) 125ml can be quoted for schools, institutions, dealers and importers in India and international markets. Include the product code SCI-169/054, the quantity and the destination on your enquiry so that the manufacturer can confirm packing and dispatch.
Request a Quote
Enquire about the Separating Funnel (Separator) 125ml through the contact page or add it to the enquiry cart. The quotation comes direct from ScienceLab, the funnel's manufacturer.
Last updated: 24 September 2026
