Burners

Bunsen Burner with Flame Stabilizer (Product Code: SLE/B/01) is a no-tip laboratory gas burner used for heating, sterilising and flame work in school and college practical labs. Its 6 in square, powder-coated metal alloy base stops it tipping over during use and keeps it steady when a gas hose is attached, and it is offered for natural gas or LP gas. This Bunsen burner for schools in India is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Bunsen Burner with Flame Stabilizer Used For?

Bunsen burners are knocked over most often when a student tugs on the hose or reaches across the bench. The wide square base of this model is designed to prevent exactly that, which makes it a sensible choice for junior practical classes. It is used for heating liquids in beakers or test tubes, sterilising inoculating loops in microbiology, bending glass tubing and flame tests in inorganic chemistry.

Before lighting, push the hose fully onto the gas inlet and make sure the needle valve is closed. Hold a lit lighter beside the top of the tube, then open the valve slowly until the flame is steady. For beakers and flasks, stand a tripod with wire gauze over the burner so the heat spreads evenly under the glass.

What to Specify When Ordering

• Gas type: natural gas or LP gas, matching the supply at your laboratory benches.
• Quantity: the number of burners per lab or per class set.
• Accessories: whether gas tubing, lighters, tripods or gauzes should be quoted with the burners, as they are listed separately.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of this no-tip Bunsen burner. It is made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and it goes factory-direct to schools, colleges, dealers and importers. For spare parts or repeat orders of SLE/B/01, ask us and the manufacturer will handle it directly. Read more on our company profile.

Related Burners

Items usually set up with this burner on a practical bench:

• Bunsen Burner Tubing — flexible neoprene hose to connect the burner to the gas outlet.
• Gas Lighter, Piezo Electric — lights the burner without matches.
• Tripod Cast Iron Varnished — supports beakers and flasks over the flame.
• Gauze Wire, Ceramic Centre — spreads heat evenly under glassware on the tripod.
• Burner With Flame Stabilizer — an alternative whose annular stabilizer top steadies the main flame.

See all gas, alcohol and electric heating options in the Burners category.

Frequently Asked Questions

Which gas does the Bunsen Burner with Flame Stabilizer run on?
The Bunsen Burner with Flame Stabilizer (SLE/B/01) is offered for either natural gas or LP gas. State which gas your laboratory uses when you order, so the burner you receive is set up for your bench supply.

Why does this Bunsen burner resist tipping over?
The Bunsen Burner with Flame Stabilizer stands on a 6 in square, powder-coated metal alloy base. The wide square footprint keeps it upright during use and steady when the attached gas hose is pulled, reducing the risk of accidents and fire hazards on a busy bench.

What is the Bunsen Burner with Flame Stabilizer made of?
The Bunsen Burner with Flame Stabilizer combines a brass needle valve for gas control, an aluminium mixing tube and a powder-coated metal alloy base. Together they give a stable and durable burner for daily use in school and college practical classes.

Is gas tubing included with the SLE/B/01 burner?
Gas tubing is not listed as part of the Bunsen Burner with Flame Stabilizer. Order Bunsen Burner Tubing or Burner Tubing separately, or ask us to add tubing to the same quotation so the burner and hose arrive together.

Who manufactures the Bunsen Burner with Flame Stabilizer?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Bunsen Burner with Flame Stabilizer. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, so quotations, spares and repeat orders come straight from the manufacturer.

How should the Bunsen Burner with Flame Stabilizer be looked after?
Let the Bunsen Burner with Flame Stabilizer cool completely before storage, keep the mixing tube free of debris and spilled chemicals, and check the hose regularly for cracks. Close the needle valve gently after use and wipe spills off the powder-coated base.

Can ScienceLab supply a class set of these burners?
Yes. ScienceLab quotes the Bunsen Burner with Flame Stabilizer in class-set quantities for schools, colleges and dealers in India and international markets. Send the quantity and gas type through the contact page for a factory-direct quotation.

Request a Quote

To price the Bunsen Burner with Flame Stabilizer (SLE/B/01), send your quantity and gas type through the contact page or add it to the enquiry cart with tubing and tripods. Quotations come direct from the manufacturer.

Last updated: 24 September 2026

Bunsen Burner Tubing (Product Code: SLE/B/02) is a 3 ft flexible neoprene hose used to carry gas from a bench outlet to a Bunsen burner in school, college and research laboratories. Its reinforced ends give a safe, convenient connection at both the burner and the gas outlet, the two points where a plain hose usually works loose first. This burner accessory is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its lab consumables range.

Specifications

What Is Bunsen Burner Tubing Used For?

Gas hose is the part of a burner set-up that wears out first: it gets bent sharply, stretched, splashed with chemicals and left near hot glassware. Swapping in fresh tubing on a regular schedule is one of the simplest safety steps a lab can take, and the 3 ft length reaches from a bench tap to the working area without loops of hose trailing across the bench.

To fit it, push one reinforced end fully over the burner inlet and the other over the gas outlet, then brush soapy water over both joints before lighting: bubbles mean a leak. Route the hose away from the flame and hot plates. Lab managers buying chemistry consumables usually keep a few spare pieces so that a damaged hose can be replaced the same day.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana, India. The company supplies this neoprene tubing as a burner accessory, so that schools and colleges can source burners, hoses and lighters in a single order. Background on the company is on our company profile.

Related Burners

Burners and alternatives that work with gas tubing:

• Bunsen Burner with Flame Stabilizer — a no-tip burner that stays steady when the hose is attached.
• Bunsen Burner with Stopcock — lets the user shut off gas at the burner end of the hose.
• Burner Tubing — a rubber-covered flexible steel alternative offered in several lengths.
• Rubber Pipe For Bunsen Burner — a rubber hose option for labs that prefer it.
• Gas Lighter, Piezo Electric — for lighting the burner once the hose is connected.

Browse all burners and accessories in the Burners category.

Frequently Asked Questions

How long is the Bunsen Burner Tubing?
Each piece of Bunsen Burner Tubing (SLE/B/02) is 3 ft long. That usually reaches from a bench gas tap to the working area without spare hose trailing across the bench; for other lengths, compare the Burner Tubing listed in the same category.

What is Bunsen Burner Tubing made of?
Bunsen Burner Tubing is made of flexible neoprene, a synthetic rubber, and has reinforced ends at both the burner and gas-outlet connections. The reinforced ends are what give the safe, convenient connection that a teaching laboratory needs.

Will the Bunsen Burner Tubing fit my burner and gas tap?
Bunsen Burner Tubing is intended for standard burner-to-outlet connections, but its bore size is not listed in our product details. Send the inlet and outlet sizes of your burners and taps through the contact page and we will confirm the fit.

When should Bunsen burner tubing be replaced?
Replace Bunsen Burner Tubing as soon as it shows cracks, stiffness, cuts, burn marks or a loose fit at either end, and at once if a soapy-water check reveals a leak. Keeping a few spare pieces lets a damaged hose be swapped immediately.

Can Bunsen Burner Tubing be used with LP gas as well as natural gas?
The gas type is not specified for Bunsen Burner Tubing in our product details. Tell us whether your laboratory uses natural gas or LP gas, and the supply pressure, and we will advise on suitability before you order.

Who supplies the Bunsen Burner Tubing?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Bunsen Burner Tubing (SLE/B/02) as an accessory in its burner range. Schools, colleges and dealers in India and international markets can order it together with burners and lighters.

What should a quotation request for this tubing include?
For Bunsen Burner Tubing, state the product code SLE/B/02, the number of pieces needed, any burners or lighters to be quoted alongside, and the delivery location. Send these details through the contact page or add the item to the enquiry cart.

Request a Quote

To order Bunsen Burner Tubing (SLE/B/02), send your requirement through the contact page or add it to the enquiry cart with your burners.

Last updated: 24 September 2026

Burner, High-Temperature Natural Gas (Product Code: SLE/B/03) is a Meker-type laboratory burner used to produce a very hot, broad flame for jobs such as heating platinum wire, igniting crucibles and fusions in chemistry labs. Its honeycombed monel grid cap splits the gas into many uniform blue cones, and it stands 8 1/2 in tall on a one-piece chrome-plated venturi tube. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the High-Temperature Natural Gas Burner Used For?

A Meker burner is chosen when a Bunsen flame is not hot or wide enough. Typical jobs are igniting precipitates in crucibles during gravimetric analysis, heating crucibles to constant mass, small fusions, and cleaning or heating platinum wire between samples in flame tests. Because the monel grid creates a bed of small blue cones, heat is spread across the whole top of the burner and a crucible or dish warms more evenly.

Connect the burner to a natural gas outlet with good tubing, light it at the grid and adjust the gas until the small cones are uniform and blue. Rest the crucible on a pipe-clay triangle just above the cones and handle hot ware only with tongs. Colleges teaching quantitative analysis and schools running a flame test kit find it a practical addition to their chemistry lab equipment.

OEM Manufacturer

This Meker-type burner is an OEM product of Jain Scientific Equipments Private Limited, which trades as ScienceLab. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and sells it straight from the factory to colleges, analytical teaching labs, dealers and importers instead of through a trading middleman. Questions about spare grids or repeat batches of SLE/B/03 can be put to us directly. Company details are on the profile page.

Related Burners

Accessories and alternatives used in the same high-temperature work:

• Meker Burner — another Meker-style burner for comparing options.
• Bunsen Burner Tubing — neoprene hose to connect the burner to the gas outlet.
• Gas Lighter, Piezo Electric — lights the grid without an open match.
• Crucible with lid — the vessel most often heated over a Meker flame.
• Crucible & Beaker Tongs — for handling hot crucibles safely.

Compare every heating option in the Burners category.

Frequently Asked Questions

How is the High-Temperature Natural Gas Burner different from a Bunsen burner?
The Burner, High-Temperature Natural Gas is a Meker type: its honeycombed monel grid cap forms many uniform hot blue cones, giving a hotter, broader heating area than the single cone of a Bunsen burner. That makes it better suited to crucible and platinum-wire work.

Can this high-temperature burner be used with LP gas?
The Burner, High-Temperature Natural Gas (SLE/B/03) is listed for natural gas only. If your laboratory runs on LP gas, contact us through the contact page before ordering so we can discuss a suitable option.

How tall is the SLE/B/03 burner and what is its tube made of?
The Burner, High-Temperature Natural Gas stands 8 1/2 in tall overall. Its venturi tube is a single chrome-plated piece, and the cap carries a honeycombed monel grid that spreads the flame into many small cones.

How should the monel grid be maintained?
Let the Burner, High-Temperature Natural Gas cool fully, then gently brush soot or spilled material off the monel grid so every opening stays clear. Do not push sharp tools through the honeycomb, as damaged cells give an uneven flame.

Is a flame temperature figure published for this burner?
No specific flame temperature is published for the Burner, High-Temperature Natural Gas; the product details describe it as very hot, as for heating platinum wire. If your method needs a stated figure, ask us through the contact page before ordering.

Who manufactures the High-Temperature Natural Gas Burner?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Burner, High-Temperature Natural Gas. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to institutions in India and international markets.

Request a Quote

For pricing on SLE/B/03, use the contact page or add the burner to the enquiry cart together with crucibles and tongs. Your quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Alcohol Lamp with Metal Cap (Product Code: SLE/B/04) is a 4 oz spirit lamp used for gentle, portable heating in classrooms and labs that have no gas supply. A metal screw-cap seals the fuel, and a separate metal cap is placed over the wick to put out the flame and stop evaporation between lessons; replacement wicks are available. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for school laboratory setups across the country and abroad.

Specifications

What Is the Alcohol Lamp with Metal Cap Used For?

Spirit lamps are the usual heat source in classrooms without piped gas and in lessons where a small, quiet flame is enough: warming a test tube of water, melting wax, heat-fixing a smear on a microscope slide, or flaming a wire loop in an introductory microbiology practical. Because the flame is modest, younger students can work with it under supervision more comfortably than with a gas burner.

Fill the lamp only when it is cold and unlit, wipe off any spilled fuel, and trim the wick so a short length stands above the holder. To put the flame out, lower the metal cap over the wick instead of blowing on it, and leave the cap on so the fuel does not evaporate before the next lesson. Keep the refill bottle away from the bench while the lamp is lit.

What to Specify When Ordering

• Number of lamps: one per student group or workstation is typical for a class.
• Replacement wicks: how many spare wicks to include, so a charred wick can be changed straight away.
• Fuel and supports: whether burning alcohol or a burner stand should be quoted with the lamps, as they are listed separately.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this spirit lamp. The lamp is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and is supplied factory-direct to schools, colleges, dealers and importers, so replacement wicks and repeat orders are handled by the maker itself. For vendor registration, institutional buyers can use the company's GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. More about us is on our company profile.

Related Burners

Fuel, supports and alternatives often ordered with the lamp:

• Denatured Ethanol (Alcohol for burning) — fuel for spirit lamps.
• Alcohol Burner Stand — holds a small beaker or dish above the flame.
• Wicks For Glass Spirit Burner — spare wicks; confirm the fit for this lamp when ordering.
• Alcohol Burner, Wickless — a tip-resistant alternative that uses a torch instead of a wick.
• Test Tube Holder — for holding tubes safely in the flame.

More heating equipment is listed in the Burners category.

Frequently Asked Questions

What size is the Alcohol Lamp with Metal Cap?
The Alcohol Lamp with Metal Cap (SLE/B/04) is a 4 oz size. That is a convenient bench lamp for small heating tasks such as warming test tubes, heat-fixing slides and flaming wire loops in school practicals.

How do I put out the flame on this alcohol lamp?
Lower the metal cap of the Alcohol Lamp with Metal Cap over the wick; never blow the flame out. Leaving the cap in place afterwards also limits evaporation of the fuel, so the lamp is ready for the next lesson.

Are replacement wicks available for the Alcohol Lamp with Metal Cap?
Yes, replacement wicks are available for the Alcohol Lamp with Metal Cap. State how many spare wicks you want in your enquiry so they can be quoted and packed together with the lamps.

Which fuel should the Alcohol Lamp with Metal Cap use?
Use only alcohol intended for burning, such as denatured ethanol, in the Alcohol Lamp with Metal Cap. Never use petrol or other volatile fuels. Fuel is not listed as included and can be quoted separately with the lamps.

Who manufactures the Alcohol Lamp with Metal Cap?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Alcohol Lamp with Metal Cap. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and quotations come straight from the manufacturer.

What does a school need to include in a quotation request?
For the Alcohol Lamp with Metal Cap, give the product code SLE/B/04, the number of lamps and spare wicks, any fuel or stands required, and the delivery address in India or overseas. Send it through our contact page.

Request a Quote

Request a price for the Alcohol Lamp with Metal Cap through the contact page, or add lamps, wicks and fuel to the enquiry cart in one go. You will receive the quotation directly from the manufacturer.

Last updated: 24 September 2026

Alcohol Burner, Wickless (Product Code: SLE/B/05) is a tip-resistant spirit burner used as a portable heat source in classrooms and field labs without gas, burning denatured alcohol through a copper-plated torch instead of a cotton wick. It holds up to 95 mL of fuel, burns for over an hour on one filling and will not leak even when tipped. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its educational laboratory equipment.

Specifications

What Is the Wickless Alcohol Burner Used For?

The biggest worry with spirit lamps in a busy classroom is a lamp being knocked over and spilling burning fuel. This burner tackles that directly: it resists tipping and does not leak if it does go over, which makes it a sensible choice for younger students and crowded benches. One filling lasts over an hour, enough for a double practical without refuelling mid-lesson.

Typical tasks include heating small volumes of water or solutions on a stand, evaporation and simple distillation demonstrations, and heat experiments in physics. Its low 3 in height suits short burner stands. Fill it only when cool and unlit, light the torch, and cover it with the aluminium snuffer cap to extinguish. Schools planning a school laboratory setup in India without gas lines often choose wickless burners for every workstation.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known by its trade name ScienceLab, is the original equipment manufacturer (OEM) of this wickless burner. It is built at the company's own licensed factory in Saha, Ambala, Haryana, India, not sourced from a reseller, and dispatched factory-direct to schools, science clubs, distributors and importers. Enquiries about replacement snuffer caps or repeat orders go straight to the manufacturer, so just ask us. See the company profile page.

Related Burners

Fuel and accessories for a complete spirit-burner station:

• Denatured Ethanol (Alcohol for burning) — the fuel this burner is designed to hold.
• Alcohol Burner Stand — supports glassware above the flame.
• Gauze Wire, Ceramic Centre — spreads heat under beakers on a stand.
• Butane Lighter — lights the torch from a safe distance.
• Alcohol Lamp with Metal Cap — a wick-type alternative for comparison.

View the full range in the Burners category.

Frequently Asked Questions

Why choose a wickless alcohol burner?
The Alcohol Burner, Wickless uses a copper-plated torch in place of a cotton wick, so there is no wick to trim, char or replace, and the torch gives even heat distribution. It also resists tipping and will not leak if knocked over.

How much fuel does the Alcohol Burner, Wickless hold and how long does it burn?
The Alcohol Burner, Wickless (SLE/B/05) holds up to 95 mL of denatured alcohol, and one filling burns for over an hour. That is usually enough for a full double practical without stopping to refuel.

What happens if a student knocks the wickless burner over?
The Alcohol Burner, Wickless is designed to be tip-resistant, and even when tipped it will not leak. Teachers should still keep flammable materials clear of the bench and supervise students whenever the burner is lit.

How is the flame on the Alcohol Burner, Wickless extinguished?
Cover the torch of the Alcohol Burner, Wickless with the aluminium snuffer cap that comes with each burner. The cap starves the flame of air; never blow it out or refill the burner while it is still warm.

Who manufactures the Alcohol Burner, Wickless?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Alcohol Burner, Wickless. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and is quoted directly by the manufacturer to buyers in India and international markets.

Can ScienceLab supply wickless burners for a whole school?
Yes. ScienceLab supplies the Alcohol Burner, Wickless in quantity to schools and distributors in India and international markets. Share the number of burners and any fuel or stands needed through our contact page.

Request a Quote

For a quotation on SLE/B/05, contact us through the contact page or add burners and fuel to the enquiry cart. Quotes are issued directly by the manufacturer.

Last updated: 24 September 2026

Alcohol Burner Stand (Product Code: SLE/B/06) is a chrome-plated steel wire support used to hold a small beaker, dish or crucible above a spirit lamp or alcohol burner, so the vessel is heated without being hand-held. Its heavy wire-gauze top measures 3 x 3 in, and the 5 in overall height leaves room for burners of all sizes underneath. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as school chemistry lab equipment.

Specifications

What Is the Alcohol Burner Stand Used For?

Stand it on a heat-resistant bench surface, slide the lit alcohol burner underneath so the flame sits below the centre of the gauze, and rest a small beaker, evaporating dish or crucible on top. Common classroom tasks include warming water for solubility work, evaporating a few millilitres of salt solution to recover crystals, and gentle heating in biology preparation rooms or outreach sessions where no gas line is available.

In spirit-lamp setups it takes the place of the tripod stand and wire gauze used with taller, hotter gas burners. Keep the vessel base within the 3 x 3 in top so it cannot slip off, put the burner out before moving anything, and let the wire frame cool before handling, because metal wire conducts heat quickly.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of this burner stand. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought from a trader, and stands go factory-direct to schools, colleges, dealers and importers. For repeat orders or matching stands for an existing lab, ask us and the manufacturer will quote directly. Read our company profile for background.

Related Burners

Items used together with this stand in spirit-lamp heating work:

• Alcohol Burner, Wickless — a tip-resistant fuel burner to place beneath the gauze top.
• Alcohol Lamp with Metal Cap — a wick-type lamp whose cap snuffs the flame after heating.
• Glass Spirit Lamp — a glass-bodied lamp option for the same setup.
• Butane Lighter — lights the burner without matches.
• Glass Beaker — a small vessel for heating liquids on the stand.

Browse every heat source and accessory in the Burners category.

Frequently Asked Questions

How big is the Alcohol Burner Stand?
The Alcohol Burner Stand (SLE/B/06) has a 3 x 3 in heavy wire-gauze top and an overall height of 5 in. That height was chosen so that alcohol burners and spirit lamps of all sizes fit underneath the gauze.

Is an alcohol burner included with the stand?
No burner is included with the Alcohol Burner Stand; burners and lamps are listed as separate products. If you would like a stand and burner quoted together, mention both in your enquiry through our contact page.

Can the Alcohol Burner Stand be used over a Bunsen burner?
The Alcohol Burner Stand is intended for alcohol burners and spirit lamps. Gas burners are generally taller and give a hotter flame, so a tripod stand with wire gauze is the usual support for a Bunsen burner instead.

Which vessels sit safely on the stand?
Flat-bottomed vessels such as small beakers, evaporating dishes and crucibles that fit within the 3 x 3 in gauze of the Alcohol Burner Stand. Round-bottomed flasks should be held with a clamp rather than balanced on top.

How should the Alcohol Burner Stand be cleaned?
Let the Alcohol Burner Stand cool fully, then wipe the chrome-plated steel wire with a damp cloth and dry it. Avoid abrasive scourers, which can scratch the plating, and brush any residue off the gauze top.

Who manufactures the Alcohol Burner Stand?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Alcohol Burner Stand. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and class sets are quoted directly by the manufacturer for India and international markets.

Request a Quote

To request pricing for the Alcohol Burner Stand, send your quantity and delivery location through our contact page, or add it to the enquiry cart with other items for your lab. The quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Burner Tubing (Product Code: SLE/B/07) is a rubber-covered flexible steel gas line used to connect a bench gas tap to a laboratory burner. Its 5/16 in steel body is covered in rubber for gas-tightness and ends in a rubber connector at each end, giving a sturdier link than plain hose for daily Bunsen burner work. It is offered in 2 ft, 3 ft and 4 ft lengths and is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, among its lab equipment accessories.

Specifications

What Is Burner Tubing Used For?

The tubing links wall or bench gas outlets to Bunsen, Tirrill, Meker and Teclu burners during flame tests, heating of solutions and ignition work. Push one rubber connector fully onto the tap nozzle and the other onto the burner inlet, then open the gas and light the burner. The steel body resists kinks and knocks better than plain rubber hose on a crowded bench.

Choose the shortest length that reaches comfortably: the 2 ft size keeps the bench tidy when the burner sits beside the tap, while 3 ft and 4 ft lengths suit burners placed further along a bench or inside a fume cupboard. Whether you are equipping a new school lab or replacing worn hoses, check the rubber cover for cracks before each practical and keep the line clear of the flame and hot tripods.

What to Specify When Ordering

• Length: 2 ft, 3 ft or 4 ft, measured from the gas tap to where the burner will stand.
• Quantity of each length, for example one per burner plus a few spares.
• Tap nozzle or burner inlet details, if your fittings are non-standard.
• Any burners or lighters to be quoted together with the tubing.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, India, supplies this steel-bodied burner tubing as part of its burner accessory range. Schools, colleges and dealers can source it in the same order as burners, lighters and stands, with one point of contact for the whole heating set-up. Learn more on our company profile.

Related Burners

Burners and fittings that are connected with this tubing:

• Bunsen Burners — a general-purpose gas burner to connect at the far end.
• Bunsen Burner with Stopcock — adds gas shut-off at the burner inlet.
• Gas Lighter, Piezo Electric — lights the burner once gas is flowing.
• Bunsen Burner Tubing — a neoprene alternative with reinforced ends.
• Rubber Pipe For Bunsen Burner — another rubber hose option for gas taps.

More burners and accessories are listed on the Burners category page.

Frequently Asked Questions

Which lengths of Burner Tubing can I order?
Burner Tubing (SLE/B/07) is available in 2 ft, 3 ft and 4 ft lengths. Pick the shortest length that reaches from the gas tap to the burner without stretching, so no spare hose lies across the bench near the flame.

What does the 5/16 in size of Burner Tubing refer to?
5/16 in is the size given for this Burner Tubing in our product details. If you need the exact bore or outside diameter to match unusual tap nozzles or burner inlets, contact us through the contact page before ordering.

Will Burner Tubing fit the burners I already have?
Yes, Burner Tubing is made to fit all burners, with rubber connectors at both ends that push onto standard hose nozzles. If your burners or gas taps have non-standard fittings, send us the inlet size so we can check before dispatch.

Why choose steel-bodied tubing instead of plain rubber hose?
The flexible steel body of Burner Tubing stands up to kinks and knocks better than plain rubber hose, while its rubber covering keeps the line gas-tight. That makes it a sturdier choice for benches where tubing is connected and disconnected every day.

How do I check Burner Tubing for leaks?
With the gas on and the burner unlit, brush soapy water over both connections of the Burner Tubing; bubbles mean a leak. Replace the tubing if the rubber cover is cracked or the connectors have become loose.

Who supplies the Burner Tubing?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Burner Tubing (SLE/B/07). Laboratories in India and international markets can order it by length, together with burners and lighters, through one quotation.

Is Burner Tubing suitable for LP gas as well as natural gas?
The gas type is not specified for this Burner Tubing in our product details. Tell us which gas your laboratory uses and we will confirm suitability before you place the order.

Request a Quote

For prices on Burner Tubing in your chosen lengths, write to us through the contact page or add the item to your enquiry cart.

Last updated: 24 September 2026

Gas Lighter, Piezo Electric (Product Code: SLE/B/08) is a hand-held spark igniter used to light Bunsen and other laboratory gas burners without matches, flint or fuel. A small self-contained generator inside produces a burst of 6 to 8 electrical sparks at 20 kV each time it is operated, and it needs no batteries or refills. Chemistry teachers and lab assistants use it to keep loose matches off student benches. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Piezo Electric Gas Lighter Used For?

To light a burner, close its air regulator, open the gas tap a little, hold the lighter tip just beside the top of the burner tube and operate it; the burst of sparks ignites the gas, after which the air supply can be opened for a blue working flame. One lighter per bench or group keeps the start of a practical quick and avoids a clutter of spent matchsticks.

It suits Bunsen burner practicals in schools and colleges where many burners are lit at once. Keep the tip clean and dry for reliable sparking, withdraw the lighter as soon as the flame catches rather than holding it in the heat, and store it with the other bench accessories so students do not treat it as a toy.

Supplier

This piezo lighter is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, India, as a bench accessory for its burner range. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). More about us is on the company profile page.

Related Burners

Gas burners this lighter is used with, plus an alternative lighter and bench safety wear:

• Bunsen Burners — the everyday burner it is most often used to light.
• Natural Gas Burner — a needle-valve burner lit in the same way.
• Burner Tirrill — a hotter-flame burner for more demanding heating.
• Butane Lighter — a flame lighter that also suits alcohol lamps and candles.
• Safety Goggles — eye protection for students working at lit burners.

See the complete range on the Burners category page.

Frequently Asked Questions

Does the Gas Lighter, Piezo Electric need batteries or refills?
No. The Gas Lighter, Piezo Electric makes its sparks with a small self-contained generator, so it needs no batteries, no fuel refills and no flint. That keeps running costs and bench clutter to a minimum in a busy teaching laboratory.

How strong is the spark from the piezo gas lighter?
Each operation of the Gas Lighter, Piezo Electric (SLE/B/08) produces a burst of 6 to 8 electrical sparks at 20 kV. That burst is what ignites the gas stream at the mouth of a Bunsen or similar laboratory burner.

Which burners can the Gas Lighter, Piezo Electric light?
The Gas Lighter, Piezo Electric lights gas burners such as Bunsen, Tirrill, Meker and Teclu types, provided gas is flowing. For wick-type alcohol lamps and candles, a flame lighter such as our Butane Lighter is the more practical choice.

Is the piezo gas lighter suitable for student use?
The Gas Lighter, Piezo Electric carries no fuel and makes no open flame of its own, which removes matches from the bench. Students should still be supervised and should point the tip only at the burner, never at people or electronic equipment.

What if the Gas Lighter, Piezo Electric stops sparking reliably?
First wipe the tip of the Gas Lighter, Piezo Electric clean and make sure it is completely dry, then try again at the burner. If it still fails to spark, contact us through the contact page with your order details.

Who supplies the Gas Lighter, Piezo Electric?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Gas Lighter, Piezo Electric as an accessory to its burner range. Schools, colleges and dealers in India and international markets can order it with burners and tubing.

What should an institutional enquiry for piezo lighters include?
For the Gas Lighter, Piezo Electric, state the number of lighters, whether burners and tubing are needed too, and the delivery address in India or overseas. Send the details through the contact page or add the items to the enquiry cart.

Request a Quote

For a price on the piezo gas lighter in single or bulk quantities, contact us or place it in your enquiry cart.

Last updated: 24 September 2026

Butane Lighter (Product Code: SLE/B/09) is a non-refillable, long-bodied flame lighter used to light Bunsen burners, alcohol burners and candles safely and quickly on the lab bench. It measures 1 x 9 in, provides hundreds of lights and has a safety switch that prevents unintended use. Teachers and lab assistants in school and college laboratories use it in place of matches. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a school laboratory equipment supplier.

Specifications

What Is the Butane Lighter Used For?

Release the safety switch, bring the tip to the wick or burner mouth and operate the lighter; with its 9 in length the user's hand stays back from the point of ignition. Because it produces a real flame, the same tool lights wick-type spirit lamps in biology practicals, candles in combustion and air-composition demonstrations, and gas burners in chemistry sessions.

Set the safety switch again as soon as the burner is lit and keep the lighter in the teacher's tray between uses. As it cannot be refilled, labs running many practicals usually hold a few spares and dispose of empty units according to local rules for gas lighters.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, Ambala, Haryana, India. The company supplies this butane lighter as a bench accessory, so a school can order burners, stands and the means to light them in one enquiry. Visit the company profile to learn more about us.

Related Burners

Burners this lighter is used to start, and a spark-type alternative:

• Alcohol Burner, Wickless — a fuel burner lit easily with a flame lighter.
• Alcohol Lamp with Metal Cap — a wick lamp with a cap for putting out the flame.
• Alcohol Burner Stand — supports a vessel over the lit spirit burner.
• Bunsen Burners — the standard gas burner it also lights.
• Gas Lighter, Piezo Electric — a fuel-free spark lighter for gas burners.

All burners and bench accessories are on the Burners category page.

Frequently Asked Questions

Can the Butane Lighter be refilled?
No. The Butane Lighter (SLE/B/09) is non-refillable and is replaced once its butane runs out. Because of that, schools usually order a few spare lighters together with their burners so a practical never stalls for want of a light.

How many lights does one Butane Lighter give?
One Butane Lighter provides hundreds of lights. The exact number depends on how long the flame is held each time, so short, quick lights at the burner mouth make each lighter last through more practical sessions.

What does the safety switch on the Butane Lighter do?
The safety switch on the Butane Lighter prevents it from being operated unintentionally, for example if a student picks it up. Release the switch just before lighting and set it again straight afterwards.

Should I choose a butane lighter or a piezo lighter?
The Butane Lighter gives a real flame, so it lights wicks, candles and gas burners alike. A piezo lighter only makes sparks, which suits gas burners but not wick lamps, so labs using spirit lamps generally need the butane type.

Can the Butane Lighter be shipped outside India?
Lighters containing butane, including this Butane Lighter, are subject to transport restrictions, particularly by air, so export shipping has to be arranged case by case. Contact us through the contact page to discuss options for your destination.

Who supplies the Butane Lighter?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Butane Lighter as a bench accessory for its burner range. Schools, colleges and dealers can order it with burners and stands by sending the quantity and delivery location.

Request a Quote

To get pricing for the Butane Lighter, contact us with your quantity or add it to the enquiry cart.

Last updated: 24 September 2026

Bunsen Burners (Product Code: SLE/B/10) are standard laboratory gas burners used for general heating, sterilising and flame tests in school, college and teaching labs. Each burner has a 100 x 12 mm nickel-plated tube with an adjustable screwed air regulator, stands 125 mm tall on an 80 mm stove-enamelled pressed steel base, and comes with one spare jet. These Bunsen burners for schools in India and abroad are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Are Bunsen Burners Used For?

The Bunsen burner is the workhorse of chemistry and biology practicals. Students use it to heat test tubes held in a holder, boil water in beakers, evaporate solutions to dryness, sterilise wire loops and carry out flame tests for metal ions. Push burner tubing onto the riffled connector, light the gas with the air regulator closed, then screw the regulator open until the yellow luminous flame turns into a steady blue cone.

For beakers and flasks, place the burner under a tripod stand and wire gauze so the flame spreads beneath the vessel. The 80 mm pressed steel base keeps the burner steady on the bench; even so, turn the gas off at the tap after each session and let the nickel-plated tube cool before the burner is put away.

OEM Manufacturer

Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, is the OEM (original equipment manufacturer) of these Bunsen burners. They are produced at its own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, dealers and importers, so class sets and top-up orders come from the maker rather than a trader. If you need further spare jets for burners already in use, ask us. See the company profile for an overview.

Related Laboratory Equipment

Equipment used with this burner in a typical heating practical:

• Burner Tubing — connects the riffled inlet to the bench gas tap.
• Tripod Stand 200mm — holds vessels above the flame.
• Gauze Wire — spreads the heat under beakers and flasks.
• Test Tube Holder — for heating test tubes directly in the flame.
• Bunsen Burner with Stopcock — the same burner design with gas shut-off at the inlet.

Compare other burner types on the Burners category page.

Frequently Asked Questions

What comes with each of the SLE/B/10 Bunsen Burners?
Each of the Bunsen Burners (SLE/B/10) is supplied with one spare jet. Gas tubing is not part of the burner and is listed separately as Burner Tubing, so add it to your enquiry if the bench taps need new hoses.

What is the spare jet on these Bunsen Burners for?
Jets on Bunsen Burners can become blocked or damaged over years of classroom use. The spare jet supplied with each SLE/B/10 burner lets the lab swap it in and keep the burner working without waiting for a replacement part.

How do I switch the Bunsen burner between a yellow and a blue flame?
Turn the screwed air regulator on the Bunsen Burners. Closed, it gives the yellow luminous flame used as a visible standby; opened, it admits air for the hotter blue flame used for heating test tubes, beakers and flame tests.

How tall are the Bunsen Burners and how big is the base?
The Bunsen Burners (SLE/B/10) stand 125 mm tall overall, with a 100 x 12 mm nickel-plated burner tube mounted on a wide stove-enamelled pressed steel base of 80 mm diameter for steadiness on the bench.

Do these Bunsen Burners run on natural gas or LPG?
The gas type is not stated in our product details for the Bunsen Burners (SLE/B/10). Tell us which gas your laboratory uses through the contact page so we can confirm the right set-up before dispatch.

Who manufactures the SLE/B/10 Bunsen Burners?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Bunsen Burners (SLE/B/10). They are made at the company's own licensed factory at Saha, Ambala, Haryana, India, and quoted directly for class sets and export orders.

Request a Quote

Request pricing for Bunsen Burners through our contact page, or add them to the enquiry cart with tubing and stands. Share the quantity, gas type and delivery location, and the quotation will come straight from the manufacturer.

Last updated: 24 September 2026

Bunsen Burner with Stopcock (Product Code: SLE/B/11) is a Bunsen gas burner used for general laboratory heating, with a stopcock fitted in its inlet tube so the gas flow can be controlled at the burner itself. It follows the design of our SLE/B/10 Bunsen Burners, letting teaching and research labs pause or fine-tune the flame without reaching back to the bench tap. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, among its chemistry lab instruments.

Specifications

Dimensions and construction follow the SLE/B/10 model described on the Bunsen Burners page.

What Is the Bunsen Burner with Stopcock Used For?

With the stopcock on the inlet, gas can be turned down between steps of an experiment, for example while a student reads a thermometer or changes a test tube, and turned back up without disturbing the connection at the tap. That is convenient in fume cupboards where the outlet is at the back, on long benches where several burners share one supply, and in practicals that alternate short heating periods with observation.

In every other respect it is used like a standard Bunsen burner: connect the tubing, open the bench tap, light the burner, then set the flame with the stopcock and the air regulator. Always close the bench tap as well as the stopcock at the end of the session so the tubing is not left under pressure.

OEM Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited sells the burners it makes, and the company is the OEM (original equipment manufacturer) of this stopcock model. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, dealers and importers, so a lab can standardise on matching SLE/B/10 and SLE/B/11 burners from one maker. For spares or repeat orders, simply ask us. Company background is on our profile page.

Related Burners

Items that pair with this burner or offer an alternative:

• Bunsen Burners — the SLE/B/10 model this burner is based on, without the stopcock.
• Burner Tubing — gas line from the bench tap to the inlet.
• Burner Bunsen With Stopcock — a stopcock burner listed in our chemistry range.
• Gauze Wire, Ceramic Centre — spreads the flame under glassware on a tripod.
• Crucible & Beaker Tongs — for lifting hot vessels off the flame.

The Burners category lists every burner we offer.

Frequently Asked Questions

How is the Bunsen Burner with Stopcock different from the SLE/B/10 burner?
The Bunsen Burner with Stopcock (SLE/B/11) follows the SLE/B/10 Bunsen burner design but has a stopcock fitted in the inlet tube. That stopcock lets the user control or pause the gas flow at the burner rather than at the bench tap.

Where can I find the dimensions of the Bunsen Burner with Stopcock?
The Bunsen Burner with Stopcock follows the dimensions and construction of the SLE/B/10 model shown on the Bunsen Burners page. Contact us if you need those figures confirmed in writing on your quotation.

Can I rely on the stopcock instead of the bench tap?
No. On the Bunsen Burner with Stopcock, use the stopcock for adjusting and pausing the flame, but always shut the bench tap at the end of work as well, so the tubing between tap and burner is not left under gas pressure.

What should I do if the stopcock becomes stiff?
Do not force the stopcock on the Bunsen Burner with Stopcock or apply ordinary oil. Once the burner is cool, clean off any residue around the stopcock, and if it stays stiff, contact us for advice through the contact page.

Is the Bunsen Burner with Stopcock suitable for LPG?
The gas type is not specified for the Bunsen Burner with Stopcock in our product details. Tell us whether your laboratory uses natural gas or LPG so we can confirm the right configuration before the burners are dispatched.

Who manufactures the Bunsen Burner with Stopcock?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Bunsen Burner with Stopcock. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and institutional and export quotations are issued directly by the manufacturer.

What information speeds up a quotation for this burner?
For the Bunsen Burner with Stopcock, send the quantity, your gas type, any tubing or stands needed, and the delivery location in India or abroad. With those details the quotation can be prepared in a single step.

Request a Quote

Send an enquiry for the Bunsen Burner with Stopcock via our contact page or add it to the enquiry cart. Quotes come direct from the manufacturer.

Last updated: 24 September 2026

Natural Gas Burner (Product Code: SLE/B/12) is a bench gas burner used for everyday heating in chemistry, biology and general teaching labs, built for precise, low-effort flame control. A needle valve meters the gas, while a heavy-gauge mixing tube threaded into a heavy die-cast zinc alloy base sets the air, giving an efficient, durable burner that stays put while it is adjusted. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Natural Gas Burner Used For?

Open the needle valve slightly, light the gas at the top of the mixing tube, then turn the tube on its thread to admit more air until the flame becomes a clean blue cone. Fine gas adjustment at the valve makes it easy to hold a small, gentle flame for warming solutions or a larger one for boiling, which is useful in flame tests, salt analysis and routine heating on a tripod and gauze.

Because the controls sit at the heavy base rather than on a light tube, students can adjust the flame without knocking the burner over. Close the needle valve gently when finished, as overtightening can wear the valve seat, and wipe spills off the zinc alloy base once it is cool. It is a dependable choice for any chemistry lab in India that runs on piped natural gas.

OEM Manufacturer

This burner is made by Jain Scientific Equipments Private Limited, which trades as ScienceLab and acts as its OEM (original equipment manufacturer). Production takes place at the company's own licensed factory at Saha, Ambala, Haryana, India, and the burners are sold factory-direct to schools, colleges, dealers and importers without a trading layer in between. Ask us about replacement parts or matching burners for an existing lab. The company profile has further details.

Related Laboratory Equipment

What you typically need alongside a natural gas burner:

• Burner Tubing — flexible, rubber-covered gas line to the tap.
• Gas Lighter, Piezo Electric — lights the burner without matches.
• Tripod Stand 200mm — supports glassware over the flame.
• Gauze Wire — spreads the heat under the vessel.
• Burner, High-Temperature Natural Gas — a Meker-type option when a hotter flame is needed.

All burner types are listed on the Burners category page.

Frequently Asked Questions

How are the gas and air adjusted on the Natural Gas Burner?
On the Natural Gas Burner (SLE/B/12), gas is set with the needle valve and air is set by turning the heavy-gauge mixing tube, which is threaded into the base. The two controls together let the user move from a gentle flame to a hot blue cone.

Can the Natural Gas Burner run on LPG instead?
The Natural Gas Burner is offered for natural gas. If your laboratory uses LPG, contact us through the contact page before ordering so we can advise on a suitable burner for that supply.

Why does the Natural Gas Burner have a die-cast zinc alloy base?
The heavy die-cast zinc alloy base gives the Natural Gas Burner weight and durability. Together with the needle valve, it minimises the chance of the burner tipping while students set the flame.

Is gas tubing included with the Natural Gas Burner?
Tubing is not listed as part of the Natural Gas Burner. Add Burner Tubing in the length your bench needs to the same enquiry, so the burner and its gas line can be quoted and delivered together.

Is the Natural Gas Burner hot enough for crucible ignitions?
The Natural Gas Burner is a general-purpose burner for everyday heating. For sustained very hot work such as crucible ignitions, a Meker-type or high-temperature burner from the same category is the better choice.

Who manufactures the Natural Gas Burner?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Natural Gas Burner. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to buyers in India and international markets.

What should I include when asking for a quotation?
For the Natural Gas Burner, send the quantity, any accessories such as tubing or tripods, and the delivery location through the contact page. Those details let us prepare a complete quotation for the whole heating set-up.

Request a Quote

For Natural Gas Burner pricing, please contact us or add it to your enquiry cart. Every quotation is issued by the manufacturer itself.

Last updated: 24 September 2026

Adjustable Bunsen Burner (Product Code: SLE/B/13) is a laboratory gas burner used where a repeatable, finely set flame is needed, with separate controls for gas and air. A brass threaded needle valve with a rubber O-ring regulates the gas, air vents regulate the air, and a flame retainer at the top keeps the flame seated on the tube. It sits on a one-piece die-cast heavy base with a riffled nozzle and is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Adjustable Bunsen Burner Used For?

Because gas and air are set independently, the same burner can hold a small, quiet flame for gently warming an indicator solution and then open up to a hot blue cone for boiling or bending glass. The flame retainer helps stop the flame lifting off the tube at higher gas settings, which makes the burner more forgiving in draughty rooms and during quick changes of flame size. College, school and quality-control labs value that repeatability.

Place it beneath a tripod and gauze, or under a flask clamped to a retort stand for distillation and reflux set-ups. Push the burner tubing well over the riffled nozzle, set the needle valve before lighting, and let the burner cool before moving it by the base. As a piece of science apparatus from an Indian manufacturer, it suits both teaching benches and routine college work.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this adjustable burner. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and supplies it factory-direct to schools, colleges, quality-control labs, dealers and importers. Because the maker handles enquiries itself, requests for seals, spare parts or repeat batches can simply be sent to us. Background on the company is on our company profile.

Related Laboratory Equipment

Supporting items for experiments run on this burner:

• Burner Tubing — connects the riffled nozzle to the gas supply.
• Gas Lighter, Piezo Electric — lights the gas once the needle valve is open.
• Retort Stand — holds flasks and condensers above the flame.
• Gauze Wire, Ceramic Centre — even heating under beakers on a tripod.
• Flame Test Of Chemicals Lab Investigation — a class activity that relies on a controllable burner flame.

Other burner designs are available in the Burners category.

Frequently Asked Questions

What makes the Adjustable Bunsen Burner adjustable?
Both inlets of the Adjustable Bunsen Burner (SLE/B/13) can be set: gas through the brass threaded needle valve and air through the air vents. Flame size and flame temperature can therefore be adjusted separately for each task.

What does the flame retainer on the Adjustable Bunsen Burner do?
The flame retainer sits at the top of the Adjustable Bunsen Burner tube and helps keep the flame anchored there. It reduces the chance of the flame lifting off or going out at higher gas flow or in a draughty room.

Why is there a rubber O-ring on the needle valve?
On the Adjustable Bunsen Burner, the rubber O-ring works with the brass threaded needle valve to seal the gas regulation, so gas is metered through the valve rather than escaping around the thread. If a seal ever needs replacing, ask us.

Will standard burner tubing fit the Adjustable Bunsen Burner?
Yes. Push-on burner tubing grips the riffled nozzle of the Adjustable Bunsen Burner. Our Burner Tubing is offered in several lengths, so choose the one that reaches from the gas tap to the burner without stretching.

Is a calibration certificate available for this burner?
The Adjustable Bunsen Burner is a heating appliance rather than a measuring instrument, so it is not calibrated. If your purchasing process asks for particular documents, discuss them with us through the contact page when you request a quotation.

Who manufactures the Adjustable Bunsen Burner?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Adjustable Bunsen Burner. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and bulk or export orders are quoted directly by the manufacturer.

Request a Quote

Ask for a quotation on the Adjustable Bunsen Burner through the contact page, or collect it with other items in the enquiry cart. Include quantity, gas type and destination, and the manufacturer will reply directly.

Last updated: 24 September 2026

Burner With Flame Stabilizer (Product Code: SLE/B/14) is a laboratory gas burner used when a steady flame is needed in draughts, at low settings or during aseptic work. Its stabilizer top lets part of the gas emerge at low velocity through an annular ring, which burns as a pilot around the principal flame and steadies it, while a needle valve controls gas flow for easy adjustment. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Burner With Flame Stabilizer Used For?

A steady flame matters whenever the burner is left running beside the work: near an open window or fan, under a fume cupboard's airflow, or at a low setting kept on standby between steps. The pilot ring anchors the main flame, which helps keep heating even when the air around the burner is moving. Teachers also find a quiet, well-defined flame easier for a class to watch during demonstrations.

In microbiology lab work in India and elsewhere, a steady burner flame is used for flaming loops and bottle necks during aseptic transfers. Set the needle valve for the size of flame needed, keep the stabilizer ring free from spilled material, and turn off the gas at the tap when work is finished.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which sells under the ScienceLab name, is the OEM (original equipment manufacturer) of this stabilised-flame burner. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, not sourced from a trader, and supplied factory-direct to schools, colleges, microbiology labs, dealers and importers. Questions about spare parts or repeat orders go straight to the maker, so just ask us. Our company profile explains more about the business.

Related Burners

Accessories and alternatives for stabilised-flame heating:

• Flame Spreader — a top described as suited to burners with a flame stabilizer, giving a fishtail flame for glass working.
• Bunsen Burner with Flame Stabilizer — a square-base, tip-resistant alternative.
• Burner Tubing — the gas line from tap to burner.
• Flame Test Of Chemicals Lab Investigation — a class activity where a steady flame helps observation.
• Crucible Tong — for handling hot crucibles and dishes.

See more in the Burners category.

Frequently Asked Questions

How does the flame stabilizer on this burner work?
On the Burner With Flame Stabilizer, some of the gas leaves the top at low velocity through an annular ring. This burns as a pilot flame around the principal flame, keeping it anchored to the burner top and steady even when the air around it moves.

When is the Burner With Flame Stabilizer better than a plain Bunsen burner?
The Burner With Flame Stabilizer is the better choice in draughts, at low flame settings and whenever a burner is left running between steps, situations in which a plain burner flame may lift off the tube or go out.

How is the flame size set on the Burner With Flame Stabilizer?
The flame size on the Burner With Flame Stabilizer (SLE/B/14) is set with its needle valve, which controls the gas flow for easy adjustment. Open it gradually after lighting until the flame reaches the size the task needs.

Does the Flame Spreader fit the Burner With Flame Stabilizer?
Our Flame Spreader is described as suited to burners with a flame stabilizer. Contact us through the contact page to confirm the fit with the Burner With Flame Stabilizer before ordering both items together.

How should the stabilizer top be cleaned?
Once the Burner With Flame Stabilizer has cooled, brush away soot or spilled material so the annular ring stays open. A blocked ring weakens the pilot effect, so check it before each practical session.

Which gas does the Burner With Flame Stabilizer use?
The gas type is not stated in our product details for the Burner With Flame Stabilizer. Tell us whether your laboratory uses natural gas or LPG when you enquire, so we can confirm the correct set-up before dispatch.

Who manufactures the Burner With Flame Stabilizer?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Burner With Flame Stabilizer. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and quotations for India and international markets come directly from the manufacturer.

Request a Quote

For prices on the Burner With Flame Stabilizer, send us an enquiry through the contact page or add it to the enquiry cart with the quantity, gas type and delivery location. The manufacturer quotes directly.

Last updated: 24 September 2026

Burner Tirrill (Product Code: SLE/B/15) is a Tirrill-pattern laboratory gas burner used for hotter heating work, such as crucible ignitions and glass bending, in senior school, college and analytical teaching labs. Both supplies can be adjusted, gas through a brass needle valve and air through adjustable air ports, and balancing the two gives a flame that can reach up to 1550°C. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Tirrill Burner Used For?

The extra heat helps wherever a plain Bunsen flame is slow: heating a crucible to constant mass when finding water of crystallisation, igniting precipitates in gravimetric analysis, burning magnesium ribbon in oxide-formation experiments and softening glass tubing for simple bends. Light the burner with the needle valve partly open, then widen the air ports until the inner blue cone is sharp and well defined; the hottest zone lies just above the tip of that cone.

For crucible work, rest the crucible in a pipe-clay triangle on a tripod and lift it only with crucible tongs once heating is complete. Keep the burner tubing clear of the base while the flame is high, and let the tube cool before the burner is handled or stored. Colleges building up their chemistry lab equipment often keep a few Tirrill burners alongside standard Bunsen models.

OEM Manufacturer

This Tirrill burner is an OEM product of Jain Scientific Equipments Private Limited, trading as ScienceLab. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and sells it straight from the factory to schools, colleges, analytical teaching labs, dealers and importers, instead of passing it through a trader. For replacement parts or further burners to match an existing set, ask us and the manufacturer will respond directly. Find out more on the company profile page.

Related Laboratory Equipment

Items used in high-temperature heating with this burner:

• Crucible with lid — porcelain crucible for heating solids to constant mass.
• Clay Pipe Triangle — supports the crucible directly in the flame.
• Crucible Tong — for lifting the hot crucible safely.
• Burner Tubing — gas connection from the bench tap.
• Meker Burner — for broader, even heating across a grid.

All our burners are grouped on the Burners category page.

Frequently Asked Questions

How hot does the Tirrill burner get?
The Burner Tirrill (SLE/B/15) can reach up to 1550°C. Temperature varies across any gas flame, and on this burner the hottest zone lies just above the tip of the inner blue cone once the gas and air are balanced.

How does the Burner Tirrill differ from a standard Bunsen burner?
On the Burner Tirrill, both the gas supply (through the brass needle valve) and the air supply (through the adjustable air ports) can be regulated. That allows a better-balanced gas-air mixture and a hotter flame than a simple Bunsen burner.

What is the needle valve on the Burner Tirrill made of?
The needle valve that adjusts the gas supply on the Burner Tirrill is made of brass. For details of other parts or materials that your purchasing specification requires, ask us through the contact page before ordering.

Is gas tubing supplied with the Burner Tirrill?
Tubing is not listed as included with the Burner Tirrill. Order Burner Tubing in the length that suits your bench, and it can be quoted together with the burners in a single enquiry.

Can the Burner Tirrill be used with LPG?
The gas type is not stated in our product details for the Burner Tirrill. Tell us whether your laboratory is supplied with natural gas or LPG so we can confirm suitability before the burners are dispatched.

Who manufactures the Burner Tirrill?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Burner Tirrill. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to colleges and dealers in India and international markets.

How do I order Tirrill burners for a college or export customer?
For the Burner Tirrill, send the quantity, gas type and delivery destination through the contact page or add the burner to the enquiry cart. The quotation is then prepared and sent directly by the manufacturer.

Request a Quote

To receive a quotation for the Burner Tirrill, contact us or add it to your enquiry cart together with crucibles and tongs.

Last updated: 24 September 2026

Micro Bunsen Burner (Product Code: SLE/B/16) is a miniature gas burner, 9 cm high, used to give a small, closely controlled flame in school, college and microbiology laboratories. Teachers and technicians pick it for aseptic work and micro-scale heating, where a fine gas control needle, an adjustable air regulator and a built-in flame retainer keep a tiny flame steady. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its biology lab equipment range.

Specifications

What Is the Micro Bunsen Burner Used For?

Micro burners are chosen where a full-size flame would be wasteful or awkward: flaming inoculating loops and the necks of culture bottles beside a Petri dish, warming a drop of reagent in a small test tube, micro-scale chemistry, and heating capillary tubes or fine glass. The compact height also lets the burner sit in tight spaces, for example under small apparatus or on crowded benches in junior science labs.

Set the fine needle to a low gas flow before lighting, then open the air regulator until the flame shows a small, sharp blue cone. The flame retainer helps the flame stay in place at these low settings, which is why the burner is a handy piece of microbiology lab equipment in India for inoculation benches. Keep paper and alcohol-soaked swabs away from the flame and shut the gas at the tap when finished.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this micro burner. It is made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and it goes factory-direct to schools, colleges, dealers and importers. The company is incorporated under CIN U29309HR2020PTC087597, and production takes place at 449, HSIIDC Industrial Area, Saha, Ambala under Factory Licence AMB-ONLINE-CHD-J-414. Read more on the company profile.

Related Laboratory Equipment

Items used with a micro burner in small-flame and aseptic work:

• Burner Tubing — connects the burner to the gas tap
• Micro Burner — another small burner, with a rotatable air regulator
• Glass Spirit Lamp — a small-flame option for rooms without a gas supply
• Petri Dish Glass With Lid — culture plates handled beside the flame
• Test Tube Holder — for warming small tubes safely

Full-size and specialist burners are listed in the Burners category.

Frequently Asked Questions

How small is the Micro Bunsen Burner?
The Micro Bunsen Burner stands just 9 cm high, much smaller than a standard bench Bunsen burner, so it fits under small apparatus, beside Petri dishes and on crowded student benches where a full-size burner would be awkward.

When should I choose a micro burner instead of a standard Bunsen burner?
Choose the Micro Bunsen Burner when the job needs a small, precise flame: flaming inoculating loops, micro-scale reactions, warming a few drops in a small tube, or heating capillaries. For beakers and flasks on a tripod, a full-size burner such as our Bunsen Burners is more suitable.

How is the flame of the Micro Bunsen Burner adjusted?
Gas flow on the Micro Bunsen Burner is set with its fine gas control needle and air with the adjustable air regulator. The built-in flame retainer then holds the resulting small flame steady, even at low settings where an ordinary burner flame could lift or go out.

Which fuel gas does the Micro Bunsen Burner use?
The fuel gas for the Micro Bunsen Burner is not specified in our product details. Tell us whether your laboratory uses natural gas or LPG, and we will confirm the correct set-up before we send a quotation.

Who manufactures the Micro Bunsen Burner?
The Micro Bunsen Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Buyers deal with the manufacturer directly for quotations and repeat orders, and can ask us about replacement parts.

Is a test or calibration certificate available for the Micro Bunsen Burner?
Any documentation your institution needs for the Micro Bunsen Burner, including whether a test or calibration certificate can be provided, should be discussed with us when you request a quotation, so we can confirm what is available.

Can the Micro Bunsen Burner be ordered in bulk or for export?
Yes. The Micro Bunsen Burner is supplied in class-set and larger quantities to schools, colleges, laboratories and distributors in India and international markets. Include the quantity, fuel gas and delivery location in your enquiry for a complete quotation.

Request a Quote

Quotations for the Micro Bunsen Burner come straight from the manufacturer. Contact us or add the burner to the enquiry cart, stating the quantity and fuel gas you use.

Last updated: 24 September 2026

High Temperature Burner (Product Code: SLE/B/17) is a gas burner fed with compressed air, used to produce a short, wide and uniformly high-temperature flame for strong heating in analytical, engineering and chemistry laboratories. A special micrometer needle valve meters the gas, compressed air enters a plated, injector-shaped venturi tube at 5 PSI, and a safety cap guards against dangerous back flashes. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the High Temperature Burner Used For?

Forcing compressed air into the venturi gives a far more intense flame than a burner that draws air in naturally, and the short, wide shape spreads that heat evenly under large crucibles, dishes and metal specimens. Typical applications include fusions and ignitions in analytical labs, heating larger samples to high temperature, and glass or metal working demonstrations. In engineering lab equipment set-ups in India, such as materials and metallurgy training rooms, it offers bench-scale high-temperature heating without a furnace.

Connect a regulated compressed-air line set to 5 PSI and the gas supply, open the gas slightly with the micrometer valve, light it, then introduce air gradually until the flame becomes short and intensely blue. Wear eye protection, keep the area around the burner clear of combustibles, and shut off the gas before the air when finishing.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the original equipment manufacturer (OEM) of this compressed-air burner and produces it at its own licensed factory at Saha, Ambala, Haryana, India. Because the burner comes from its maker rather than a reseller, laboratories, engineering colleges, dealers and importers buy it factory-direct, and questions about fittings or replacement parts are answered by the people who build it. Background on the company is on the company profile.

Related Laboratory Equipment

Alternatives and accessories for high-temperature work:

• Burner, High-Temperature Natural Gas — a Meker-type hot burner that does not need compressed air
• Meker Burner — another high-heat option for crucible work
• Burner Tubing — gas connection to the burner
• Crucible Tong — stainless steel tong for handling hot crucibles
• Safety Goggles — eye protection when working near an intense flame

Explore the Burners category for other designs.

Frequently Asked Questions

Does the High Temperature Burner need compressed air?
Yes. The High Temperature Burner has a direct feed inlet for compressed air and operates on 5 PSI air pressure. An air source is not listed as part of the product, so plan for a regulated compressed-air line or a small compressor at the bench.

Which gases can the High Temperature Burner burn?
The High Temperature Burner is designed to burn all gases in large volume. If you would like advice on setting it up for your particular fuel gas, share the details through our contact page before ordering.

What does the safety cap on the High Temperature Burner do?
The safety cap on the High Temperature Burner prevents dangerous back flashes, where the flame travels back into the burner tube. It is an important feature on a burner that mixes fuel gas with forced compressed air in large volume.

What is supplied with the High Temperature Burner?
The High Temperature Burner is supplied complete with its die-cast alloy, plated octagonal base. Gas tubing and the compressed-air supply are not listed as part of the product, so order tubing separately and arrange a regulated air line at the bench.

What is the maximum flame temperature of the High Temperature Burner?
A maximum temperature figure is not given in our product details for the High Temperature Burner; it is described as giving a short, wide and uniformly high-temperature flame. Contact us if your application needs a stated figure.

Who manufactures the High Temperature Burner?
The High Temperature Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes it at its own factory in Saha, Ambala, Haryana, India. Quotations, repeat orders and spare-part questions are handled by the manufacturer itself.

Can the High Temperature Burner be quoted for institutions and export?
Yes. The High Temperature Burner is quoted for colleges, analytical laboratories, training institutes and distributors in India and international markets. Send the quantity, your fuel gas and the delivery location, and the quotation will come directly from the manufacturer.

Request a Quote

For High Temperature Burner pricing direct from the manufacturer, use our contact page or add the burner to the enquiry cart.

Last updated: 24 September 2026

Meker Burner (Product Code: SLE/B/18) is a high-heat laboratory gas burner used to heat crucibles, dishes and samples strongly and evenly in analytical, college and research laboratories. It is rated for temperatures up to 1750°C and sits on a one-piece die-cast base carrying its own gas and air regulators. The burner is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its scientific laboratory equipment range.

Specifications

What Is the Meker Burner Used For?

Meker burners are the usual choice for igniting precipitates to constant mass, heating crucibles red hot, fusing samples and driving off water from hydrated salts quickly. The wide, even flame heats the whole base of a crucible or evaporating dish at once, so samples reach temperature faster and more uniformly than over a Bunsen flame, which makes this burner a staple of college chemistry lab equipment in India.

Set the gas regulator first, light the burner, then open the air regulator until the flame is at its hottest and least luminous. Support crucibles on a pipe-clay triangle, keep the one-piece base on a clear, heat-resistant surface, and allow the burner head to cool fully before it is touched after a long run at high temperature.

OEM Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited makes this burner. The company is its OEM (original equipment manufacturer), and the burner is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, not sourced from a trading house. Colleges, research institutes, dealers and importers therefore receive quotations straight from the manufacturer, and repeat orders for matching burners come from the same source. See the company profile for more about the company.

Related Burners

Other Meker designs and the accessories used for crucible heating:

• Meker Burner Heavy Base — a Meker variant on a heavy wide base
• Economy Burner Meker — a lower-cost Meker option
• Crucible with lid — porcelain crucible for ignitions
• Clay Pipe Triangle — holds the crucible in the flame
• Burner Tubing — gas supply line

Compare all burners on the Burners category page.

Frequently Asked Questions

How hot does the Meker Burner get?
The Meker Burner is rated for temperatures up to 1750°C. The temperature reached in practice depends on the gas supply and on how the separate gas and air regulators are set, so adjust both for the hottest, least luminous flame.

Should I choose a Meker Burner or a Bunsen burner?
Choose the Meker Burner for strong, even heating of crucibles and evaporating dishes, such as igniting precipitates. A Bunsen burner remains the practical choice for general heating of test tubes and beakers on a school bench, where such high temperatures are not needed.

How are gas and air controlled on the Meker Burner?
The Meker Burner has separate gas and air regulators on its one-piece die-cast base. Setting the gas first and then opening the air lets the user tune the mixture until the flame is at its hottest and most even.

How does the Meker Burner compare with the Heavy Base and Economy models?
All three are Meker-type burners. This Meker Burner is the model with a stated rating of up to 1750°C and a one-piece die-cast base; the Heavy Base and Economy versions differ in base and construction.

Which gas is the Meker Burner set up for?
The fuel gas for the Meker Burner is not stated in our product details. Tell us whether your laboratory uses natural gas or LPG when you enquire, and we will confirm the right configuration before quoting.

Who manufactures the Meker Burner?
The Meker Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own factory in Saha, Ambala, Haryana, India. Laboratories deal directly with the manufacturer for pricing, repeat orders and any replacement-part enquiries.

Can you supply Meker Burners for a college lab or export order?
Yes. The Meker Burner is supplied to colleges, research laboratories and distributors in India and international markets, in single units or bench quantities. Send your quantity, fuel gas and delivery location through the contact page or enquiry cart.

Request a Quote

Meker Burner prices are quoted directly by the manufacturer: contact us or add the burner to your enquiry cart.

Last updated: 24 September 2026

Teclu Burner (Product Code: SLE/B/19) is a natural gas burner used to produce a very hot flame for glasswork, soldering and general heating in physics, chemistry and workshop teaching labs. Its conical mixing section, screwed air regulator and gas control needle blend gas and air thoroughly above a 125 x 13 mm burner tube. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and sits in its school lab equipment range for Indian and international buyers.

Specifications

What Is the Teclu Burner Used For?

In glasswork the Teclu burner is used to soften, bend and seal glass tubing, draw out jets and fire-polish cut ends before they are fitted into stoppers for gas-collection and distillation set-ups. Its hot flame also suits soldering tasks, which makes it a useful item of physics lab equipment in India for electrical and workshop practicals, alongside general heating of test tubes, beakers and crucibles.

Set the gas control needle, light the burner, then turn the screwed air regulator until the flame shows a sharp blue inner cone. When bending tubing, rotate the glass evenly in the hottest part of the flame and let it cool on a heat-resistant mat rather than on the bench. The 80 mm base keeps the burner steady while you work with both hands.

OEM Manufacturer

The Teclu Burner is an original ScienceLab product. Jain Scientific Equipments Private Limited, which trades as ScienceLab, is its OEM (original equipment manufacturer) and makes it at its own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges, dealers and importers buy it factory-direct and can ask the maker itself about spares or repeat batches. The company is a registered MSME (Udyam UDYAM-HR-01-0003714), and its export shipments are handled under Importer-Exporter Code AAECJ8618A issued by the DGFT. More background is on our company profile.

Related Laboratory Equipment

Items used with the Teclu burner in glassworking practicals:

• Borosilicate Glass Tubing — tubing to bend, draw and seal in the flame
• Glass Tubing Cutter — scores tubing to length before flame work
• Flame Spreader — a fishtail-flame top for glass working; ask us about fit
• Burner Tubing — flexible gas line to the bench tap
• Gas Lighter, Piezo Electric — lights the burner without matches

Find other burner types in the Burners category.

Frequently Asked Questions

What are the main dimensions of the Teclu Burner?
The Teclu Burner has a burner tube of 125 x 13 mm (height x diameter), a base 80 mm in diameter and a 9 mm gas inlet. The compact base keeps it steady on the bench while both hands are free for glasswork.

Why does the Teclu Burner give a hotter flame than a basic Bunsen burner?
The Teclu Burner has a conical mixing section, a screwed air regulator and a gas control needle, so gas and air are mixed thoroughly and adjusted finely. The result is a very hot flame suited to glasswork and soldering.

Is the Teclu Burner suitable for bending glass tubing?
Yes. The Teclu Burner's very hot flame is suitable for glasswork such as bending, sealing and fire-polishing glass tubing. Rotate the tube evenly in the hottest part of the flame and cool finished pieces on a heat-resistant mat.

Can the Teclu Burner be used with LPG?
The Teclu Burner is described as a natural gas burner. If your laboratory runs on LPG, contact us before ordering so that we can confirm whether a suitable configuration can be supplied for your gas.

What tubing fits the Teclu Burner's 9 mm inlet?
Use flexible gas tubing sized to grip a 9 mm inlet firmly. Ask us to confirm a matching tubing from our range when you order the Teclu Burner, and check the connection for cracks before each practical.

Who manufactures the Teclu Burner?
The Teclu Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Quotations come directly from the manufacturer, which also handles repeat orders and questions about replacement parts.

Do you export the Teclu Burner?
Yes. The Teclu Burner is supplied to schools, colleges, institutions and distributors in India and international markets. Include the quantity, your fuel gas and the destination in your enquiry so the quotation covers everything you need.

Request a Quote

For a Teclu Burner quotation from the manufacturer, reach us through the contact page or add the burner to your enquiry cart.

Last updated: 24 September 2026

Bunsen Burner Pilot Flame (Product Code: SLE/B/20) is a Bunsen burner with a separate pilot light tube, used to keep a small flame alight between heating steps in school, college and routine testing laboratories. Because the main flame can be brought back without relighting, it saves time when the burner is needed only intermittently, while a sleeve-type regulator and stopcock give reliable gas control. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Bunsen Burner Pilot Flame Used For?

Many practicals alternate short bursts of heating with longer periods of observing, weighing or recording: repeated heating and cooling cycles, successive flame tests, sterilising a loop between transfers, or warming a tube for a few seconds before each reading. With a pilot flame, the main burner can be turned down between steps and brought back instantly, with no relighting and no fumbling for a lighter mid-experiment.

This makes it convenient for intermittent heating in a school chemistry lab and on shared benches where several students use one burner in turn. Adjust the pilot with its screw so it is small but stable, use the stopcock and sleeve regulator to set the main flame, and close the bench gas tap at the end of the session so both flames go out.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM, or original equipment manufacturer, of the Bunsen Burner Pilot Flame. The burner, with its pilot tube, stopcock and chrome-plated base, is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, institutions and dealers. With no middleman involved, quotations, repeat orders and requests for replacement parts all go straight to the maker. Our company profile has more about who we are.

Related Burners

Useful items and alternatives for on-off heating work:

• Burner Tubing — the gas connection from the bench tap
• Bunsen Burner with Stopcock — stopcock control without the pilot tube
• Burner With Flame Stabilizer — a steady flame for draughty positions
• Test Tube Holder, Metal — for short, repeated heating of tubes
• Flame Test Of Chemicals Lab Investigation — a stop-start activity that benefits from a pilot

View all burners in the Burners category.

Frequently Asked Questions

How does the Bunsen Burner Pilot Flame save time?
The Bunsen Burner Pilot Flame keeps a small pilot alight while the main flame is turned down, so the burner can be brought back to full heat instantly between steps. There is no need to relight it with a lighter in the middle of an experiment.

How is the pilot flame adjusted?
The pilot light tube on the Bunsen Burner Pilot Flame has its own screw adjustment. Turn it until the pilot is small but stable, so that it stays alight without wasting gas while the main flame is off.

How is the main gas flow controlled?
The main flame of the Bunsen Burner Pilot Flame is controlled through a sleeve-type regulator and a stopcock. Together they give reliable gas control, letting students set the flame and turn it down between heating steps.

Can the pilot be left burning unattended?
No. Even though the Bunsen Burner Pilot Flame keeps only a small pilot alight, any lit burner must stay supervised. Close the bench gas tap at the end of the session so that both the pilot and the main flame go out.

What is the base of the Bunsen Burner Pilot Flame made of?
The base of the Bunsen Burner Pilot Flame is stamped steel with chrome plating. Wipe it with a damp cloth once the burner is cool and dry it afterwards; avoid abrasive cleaners that could scratch the plating.

Which gas is the Bunsen Burner Pilot Flame designed for?
The fuel gas for the Bunsen Burner Pilot Flame is not specified in our product details. Let us know whether your laboratory uses natural gas or LPG, and we will confirm the correct configuration before sending a quotation.

Who manufactures the Bunsen Burner Pilot Flame?
The Bunsen Burner Pilot Flame is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes it at its own factory in Saha, Ambala, Haryana, India. Schools and dealers buy it factory-direct, with quotations issued by the manufacturer.

What should a school or college include in its enquiry?
When enquiring about the Bunsen Burner Pilot Flame, include the quantity, your fuel gas, any tubing needed and the delivery location in India or overseas. Send it through the contact page or enquiry cart for a quotation.

Request a Quote

Get a manufacturer's price for the Bunsen Burner Pilot Flame by contacting us or adding it to the enquiry cart.

Last updated: 24 September 2026

Meker Burner Heavy Base (Product Code: SLE/B/21) is a Meker-type gas burner used for high-temperature work such as crucible ignitions in chemistry and analytical laboratories. Its heavy, wide die-cast metal base, 80 mm across, carries a nickel-plated burner tube topped by a 25 mm perforated plate that gives a stable flame with high, evenly distributed temperature. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as chemistry lab equipment for India and international markets.

Specifications

What Is the Meker Burner Heavy Base Used For?

In analytical and inorganic practicals this burner is chosen when a standard Bunsen flame is not hot or wide enough: igniting precipitates in a crucible to constant mass, driving water of crystallisation out of salts, heating metal oxides, or bringing a hard-glass tube to a strong, uniform heat. Because the perforated plate spreads the flame across its full 25 mm width, a crucible sitting in a clay triangle is heated from below over its whole base rather than at a single hot spot.

Push the gas tubing fully over the riffled inlet, light the gas at the head, and then turn the air regulator gradually until the flame over the plate becomes short, blue and even. The wide 80 mm base keeps the burner steady under a tripod during long heating runs, which matters in a busy school chemistry lab equipment setup where benches are shared by several students.

OEM Manufacturer

The Meker Burner Heavy Base is built by its OEM (original equipment manufacturer), Jain Scientific Equipments Private Limited, which trades as ScienceLab. Production takes place at the company's own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges, dealers and importers buy directly from the maker instead of through a trader. Questions about the heavy base, the perforated head or replacement parts are answered by the manufacturer itself. Read the company profile for background on the business and its product range.

Related Burners

Items that are commonly ordered with a Meker burner for high-temperature heating:

• Economy Burner Meker — a lower-cost Meker-type burner for routine heating on general benches
• Burner Tubing — flexible tubing to run gas from the bench tap to the riffled inlet
• Gas Lighter, Piezo Electric — lights the burner head without matches
• Tripod Cast Iron Varnished — holds a clay triangle, crucible or vessel above the flame
• Crucible with lid — for ignition and heating-to-constant-mass exercises

See every gas burner and flame accessory in our Burners range.

Frequently Asked Questions

Why choose the Meker Burner Heavy Base?
The Meker Burner Heavy Base has a wide die-cast metal base, 80 mm across, which gives it weight and a broad footprint. It is therefore less likely to be knocked over while a hot crucible or tripod is in use during long heating runs.

How is the flame of the Meker Burner Heavy Base adjusted?
On the Meker Burner Heavy Base, rotate the air regulator around the jet. Opening it admits more air for a hotter, bluer flame over the perforated plate; closing it gives a softer, more luminous flame for gentler heating.

Which fuel gas is the Meker Burner Heavy Base set up for?
The gas type and jet size of the Meker Burner Heavy Base are not stated in our current product information. Tell us whether your laboratory uses LPG or piped natural gas when you contact us, so we can confirm the correct configuration.

Is gas tubing included with the Meker Burner Heavy Base?
Tubing is not listed as part of the Meker Burner Heavy Base supply. It can be ordered separately, for example our Burner Tubing, which pushes onto the riffled gas inlet; please confirm the fit when you enquire.

How should the Meker Burner Heavy Base be looked after?
Let the Meker Burner Heavy Base cool completely, then clear the holes of the perforated plate with a soft brush if they become partly blocked, and wipe the nickel-plated tube with a dry cloth. Check the tubing on the inlet for cracks before each session.

Who manufactures the Meker Burner Heavy Base?
The Meker Burner Heavy Base is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Institutions and dealers buy it factory-direct, and quotations come straight from the manufacturer.

What should an institutional quotation request include?
For the Meker Burner Heavy Base, send the quantity, the fuel gas used in your laboratory, the delivery location in India or abroad, and any tender format you must follow. Bulk orders from schools, colleges and distributors are welcome.

Request a Quote

For pricing and delivery details direct from the manufacturer, contact us or add the Meker Burner Heavy Base to your enquiry cart.

Last updated: 24 September 2026

Economy Burner Meker (Product Code: SLE/B/22) is a cost-conscious Meker-pattern gas burner used for routine heating on student benches in schools and colleges. A 25 mm perforated mesh plate sits on a nickel-plated burner tube with a tapered bottom, mounted on a cast base with a 10 mm OD riffled gas inlet. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and suits class-set buying of educational laboratory equipment.

Specifications

What Is the Economy Burner Meker Used For?

This is an everyday bench burner for the heating steps that fill most practical timetables: warming a beaker of water on a tripod and wire gauze, evaporating a solution to crystallisation in a basin, heating a solid in a boiling tube, or keeping a water bath simmering. The mesh plate spreads the flame over its 25 mm width, so glassware on a gauze heats more gently and evenly than over a narrow single-cone flame.

When planning a school laboratory setup in India, a common approach is to provide economy burners for the student benches and keep a few heavier-duty burners for ignition work. Before lighting, fit gas tubing that grips the 10 mm riffled inlet firmly, keep the mesh plate clear of spills, and let the burner cool on its base before it is returned to the store.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of the Economy Burner Meker, which is made at the company's own licensed factory at Saha, Ambala, Haryana, India. Buying straight from the factory rather than through a trader suits schools, colleges and dealers equipping whole classes, and repeat orders for identical burners are handled by the same manufacturer. More about the business is on our company profile page.

Related Burners

Accessories and alternatives that complete a routine heating station:

• Meker Burner Heavy Base — a heavier die-cast-base Meker for sustained high-temperature work
• Bunsen Burner Tubing — gas tubing to link the inlet with the bench gas tap
• Butane Lighter — a long-reach way to light the burner safely
• Tripod, Stainless Steel — supports beakers and basins above the flame
• Gauze Wire — sits on the tripod to spread heat under glassware

Compare other gas burners, spirit lamps and lighters in our Burners range.

Frequently Asked Questions

What size tubing fits the Economy Burner Meker's gas inlet?
The Economy Burner Meker has a riffled gas inlet tube of 10 mm outside diameter, so choose gas tubing whose bore grips that size firmly. We can confirm a matching tube from our range when you place your order.

Is the air supply adjustable on the Economy Burner Meker?
An air regulator is not described in our product information for the Economy Burner Meker. If adjustable air matters for your practicals, contact us before ordering and we will confirm the air-control arrangement of the current model.

Is the Economy Burner Meker suitable for heating crucibles to constant mass?
The Economy Burner Meker is designed for routine use such as heating beakers, basins and boiling tubes. For long, high-temperature ignitions of crucibles, the Meker Burner Heavy Base is the better match in the same range.

How do I keep the mesh plate working well?
Keep the 25 mm mesh plate of the Economy Burner Meker clean: avoid letting solutions boil over onto the head, brush away deposits once the burner is cold, and store it upright so the plate is not bent or damaged.

What are the overall dimensions of the Economy Burner Meker?
The Economy Burner Meker is approximately 175 mm high overall, with a cast base about 80 mm in diameter and a 25 mm burner plate. This compact footprint suits crowded student benches where several burners are in use at once.

Who manufactures the Economy Burner Meker?
The Economy Burner Meker is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and produces it at its own factory in Saha, Ambala, Haryana, India. Schools and dealers receive quotations directly from the manufacturer, including for class sets.

Can we order the Economy Burner Meker as a class set?
Yes. The Economy Burner Meker can be supplied in class-set and bulk quantities to schools, colleges and distributors in India and international markets. Share the quantity, fuel gas and delivery location for a quotation.

Request a Quote

To receive the manufacturer's pricing for single units or class quantities, contact us or place the Economy Burner Meker in your enquiry cart.

Last updated: 24 September 2026

Flame Spreader (Product Code: SLE/B/23) is a burner-top attachment with an 18 mm top, used to turn a round burner flame into a flat, fishtail-shaped flame for glass working in chemistry and physics laboratories. It is intended for burners fitted with a flame stabilizer, and teachers and lab assistants use it when bending or shaping glass tubing for apparatus. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, alongside its chemistry lab equipment in India.

Specifications

What Is the Flame Spreader Used For?

A plain burner flame heats only a short length of glass tubing, which tends to make a bend kink or flatten. With the spreader in place, the wide fishtail flame warms several centimetres of tube at once, so the glass softens evenly and can be bent into a smooth right angle or U-shape. Teachers use it to prepare delivery tubes for gas collection apparatus, bent tubes for siphon and capillary demonstrations, and jets for wash bottles.

Hold the tube along the length of the flame and roll it steadily until it sags slightly, then take it out of the flame and bend it in one smooth movement. Place finished pieces on a heat-resistant mat to cool, and remember that the spreader itself stays hot for some time after the gas is turned off.

OEM Manufacturer

ScienceLab is the brand of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) that makes the Flame Spreader at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, institutions and dealers therefore buy this small accessory from its maker, and can ask the same team whether it suits burners they already own. For purchase departments that register vendors, the company's GSTIN is 06AAECJ8618A1ZT and its Legal Entity Identifier (LEI) is 3358004HRD1JIVXKYX49. Further background is on our company profile.

Related Laboratory Equipment

Burners and glass-working items used alongside the spreader:

• Bunsen Burner with Flame Stabilizer — the burner type this attachment is intended for
• Burner With Flame Stabilizer — another stabilized burner to consider for glass work
• Soda Glass Tubing 6mm — soft glass tubing that bends readily in a burner flame
• Glass Tubing Cutter — scores tubing to length before it is bent
• Gas Lighter, Piezo Electric — lights the burner once the spreader is fitted

More burners and flame accessories are listed in our Burners range.

Frequently Asked Questions

What does the Flame Spreader do?
The Flame Spreader reshapes a burner's round flame into a flat fishtail flame. This spreads the heat along a longer section of glass tubing, so the glass softens evenly and can be bent or shaped without kinking.

Will the Flame Spreader fit my existing burner?
The Flame Spreader has an 18 mm top and is intended for burners with a flame stabilizer. Because burner tubes vary, send us your burner details through our contact page and we will confirm the fit before you order.

Can I heat beakers or flasks with the Flame Spreader fitted?
The Flame Spreader is meant for glass working rather than general heating. For warming beakers or flasks, remove it and use the normal burner flame with a tripod and wire gauze, which spreads heat more safely under glassware.

Which glass tubing is easiest to work with the Flame Spreader?
Soft soda-glass tubing is the usual choice for bending with the Flame Spreader in a burner flame. Borosilicate tubing softens at a much higher temperature and may need a hotter flame, so ask us if you are unsure which tubing to order.

How should the Flame Spreader be handled after use?
Turn off the gas and allow the Flame Spreader to cool fully before lifting it off the burner, or use tongs if it must be removed while still warm. The attachment stays hot for some time after the flame is out.

Who manufactures the Flame Spreader?
The Flame Spreader is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Quotations and repeat orders are handled directly by the manufacturer, which can also advise on burner compatibility.

What details should we send for a Flame Spreader quotation?
For a Flame Spreader quotation, tell us the quantity, the burners you will use it with, and the delivery address in India or abroad. Bulk supply to schools, colleges and distributors is available on request.

Request a Quote

To order or ask the manufacturer for pricing, contact us or add the Flame Spreader to your enquiry cart.

Last updated: 24 September 2026

Burner Tube (Product Code: SLE/B/24) is a 1 metre length of gas tubing used to carry fuel gas from the laboratory gas tap to a Bunsen burner in school, college and institute labs. Both ends are reinforced so they push onto the burner inlet and the tap nozzle and stay firmly in place. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as one of the everyday accessories in its school lab equipment range.

Key Details

What Is the Burner Tube Used For?

Every gas burner on a practical bench needs a sound connection to its tap, and this tube provides it. The 1 metre length lets students place the Bunsen burner comfortably away from the tap and from their books, while the reinforced ends resist the splitting and stretching that happen when softer tubing is pushed on and pulled off nozzles day after day.

For a safe school lab setup, push each end fully onto its nozzle, route the tube so that it does not lie across a tripod, hot plate or flame, and turn the tap off at the bench, not just at the burner, when work ends. Check the tube for cracks, hardening or loose ends at the start of each term, and brush soapy water over the joints if you suspect a leak: bubbles show where the gas is escaping.

Supplier

Jain Scientific Equipments Private Limited, known to customers by its trading name ScienceLab, supplies the Burner Tube from Ambala, Haryana, India. Laboratories can order the tubing together with burners, lighters and other bench accessories in a single enquiry, for delivery to institutions and distributors in India and international markets. Details about the company are on our company profile.

Related Burners

Burners that this tube connects to, and an alternative tubing option:

• Bunsen Burners — general-purpose burners for the student bench
• Bunsen Burner with Stopcock — adds gas control at the burner itself
• Adjustable Bunsen Burner — a burner with adjustable flame for varied heating tasks
• Bunsen Burner Tubing — another gas tubing listing in the same range, for comparison

All burners, tubing and lighters are grouped in our Burners range.

Frequently Asked Questions

How long is the Burner Tube?
The Burner Tube is 1 metre long, enough to reach from a bench gas tap to a Bunsen burner placed at a safe working distance from the tap, books and other apparatus on the bench.

Why are the ends of the Burner Tube reinforced?
The reinforced ends of the Burner Tube are the parts that grip the burner inlet and the gas tap. They help the tube hold its fit and resist splitting after it is pushed on and pulled off nozzles repeatedly.

Can the Burner Tube be cut to a shorter length?
We advise against cutting the Burner Tube. Cutting removes a reinforced end, and a plain cut end will not grip a nozzle as securely, which could let gas escape at the joint during a practical.

Will the Burner Tube suit LPG and natural gas taps?
The bore size and gas rating of the Burner Tube are not listed in our current product information. Share your tap and burner details via our contact page and we will confirm suitability before you order.

When should the Burner Tube be replaced?
Replace the Burner Tube as soon as it shows cracks, becomes stiff, or no longer grips the nozzles tightly. Regular visual checks at the start of each term are more reliable than relying on a fixed replacement interval.

Who supplies the Burner Tube?
The Burner Tube is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, which offers it alongside its range of laboratory burners so that a complete gas connection can be ordered from one source.

Can we order Burner Tubes for a whole laboratory?
Yes. The Burner Tube can be supplied in bulk to schools, colleges and distributors in India and international markets. Include the quantity and delivery location in your enquiry so we can prepare a complete quotation.

Request a Quote

For pricing on single tubes or laboratory quantities, contact us or add the Burner Tube to your enquiry cart.

Last updated: 24 September 2026

Electric Burner (Product Code: SE/B/25) is a mains-powered heater used to replace a conventional gas Bunsen burner for routine heating in schools, colleges and training labs. A 500 watt heater and a reflective internal stainless steel bowl send a concentrated stream of heat upwards, comparable with a gas-powered Bunsen, over a 130 mm heating area with a stated range of 37 to 920 °C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its school laboratory equipment range.

Specifications

What Is the Electric Burner Used For?

The electric burner takes over the routine heating jobs of a Bunsen: warming a boiling tube held in a test tube holder, heating a small crucible, evaporating a few millilitres of solution, or softening wax and other materials in demonstrations. It is especially practical in a new lab setup where piped gas has not been installed, in examination rooms, and in classrooms where supervisors prefer not to have gas taps open at every bench.

Stand it on a level, heat-resistant bench surface with the wire safety guard in place, keep paper, solvents and plastic items well away from the 130 mm heating area, and never let liquids boil over into the stainless steel bowl. After switching off, leave the unit to cool completely before it is moved or stored, since the bowl and guard retain heat.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, India, supplies the Electric Burner to schools, colleges and laboratories in India and international markets. Buyers can combine it with holders, tongs and gas burners in one enquiry, and questions about the mains supply for a particular country are answered before a quotation is issued. Find out more on our company profile.

Related Laboratory Equipment

Holders, alternatives and other heaters used in the same practicals:

• Test Tube Holder, Metal — keeps hands clear while a tube is held in the heat stream
• Crucible & Beaker Tongs — for lifting hot crucibles and small beakers
• Bunsen Burners — the gas option, still needed for flame tests
• Hot Plate General Purpose — flat-surface heating for beakers and flasks
• Block Heater — dry, even heating of tubes held in aluminium blocks

Compare gas and electric heating options in our Burners range.

Frequently Asked Questions

Does the Electric Burner need a gas connection?
No. The Electric Burner runs on electricity through a 500 watt heater, so no gas tap, cylinder or lighter is required. This makes it practical for rooms without piped gas and for supervisors who prefer to keep gas taps closed.

What temperature range does the Electric Burner cover?
The Electric Burner has a stated temperature range of 37 to 920 °C, delivered over a heating area 130 mm in diameter by its high-power heater and reflective internal stainless steel bowl.

Can the Electric Burner be used for flame tests?
No. Flame tests depend on metal ions colouring a gas flame, and the Electric Burner produces a stream of heat rather than a flame. Keep a gas burner available for flame-test practicals and use the electric unit for routine heating.

What mains supply does the Electric Burner need?
The Electric Burner is rated at 500 watt; supply voltage and plug type are not listed in our current product information. Tell us your country and mains supply through our contact page and we will confirm the correct version before quoting.

What safety features does the Electric Burner have?
A wire safety guard is included with the Electric Burner to reduce accidental contact with the hot bowl. Stand it on a level, heat-resistant surface and let it cool completely after switching off, since the bowl and guard retain heat.

How big and heavy is the Electric Burner?
The Electric Burner measures 310 x 200 x 110 mm (length x width x height) and weighs 1.7 kg, so it can be moved between benches and stored easily once it has cooled down.

How should the Electric Burner be cleaned?
Clean the Electric Burner only when it is cold and unplugged: wipe the outer surfaces with a dry or slightly damp cloth, remove spilled residue from the bowl gently, and never immerse the unit in water.

Who supplies the Electric Burner?
The Electric Burner is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, colleges and laboratories in India and international markets. Calibration certificate availability and other documentation can be discussed when you request a quotation.

Request a Quote

For pricing, mains-supply options or bulk orders, contact us or add the Electric Burner to your enquiry cart.

Last updated: 24 September 2026

Block Heater (Product Code: SLE/B/26) is a dry heating unit used to warm tubes held in interchangeable aluminium accessory blocks in biology, biotechnology and chemistry laboratories. It offers a safe, dry and consistent alternative to a flame or water bath, with the temperature set on an analogue dial from ambient +5 °C to 120 °C and uniformity of ±0.5 °C at 60 °C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its biology lab equipment range.

Specifications

What Is the Block Heater Used For?

In practical classes the block heater holds microtubes or test tubes at a steady temperature for enzyme experiments, incubation steps in DNA extraction activities, denaturing samples before gel work, and warming reagents in tubes for food and biochemical tests. Because there is no water, nothing evaporates, tubes do not float or tip, and there is no risk of water getting under caps; the unit is simply switched on, set on the dial and allowed to reach temperature.

Fit the block that matches your tubes so that each tube is in close contact with the aluminium: one full-size block for 10 to 25 mm tubes or 50 ml tubes, or two smaller blocks for 0.2 to 2.0 ml microtubes. For temperature-sensitive work, check the reading with a thermometer placed in a tube of water in the block. Use the supplied block extraction tool to change hot blocks rather than fingers.

What to Specify When Ordering

• The tube sizes you will heat: 10, 12, 13, 16, 19 or 25 mm diameter tubes or 50 ml tubes (one block fills the well)
• Any microtube sizes: 0.2, 0.5, 1.5 or 2.0 ml (two blocks fit the well together)
• How many accessory blocks you want with each unit, since the blocks are interchangeable
• Your mains supply, as the unit is specified for 230 V, 50-60 Hz
• The number of heaters required for each laboratory

Supplier

Jain Scientific Equipments Private Limited, the Ambala, Haryana company behind the ScienceLab name, supplies this block heater to educational and research laboratories in India and international markets. Its team can help match accessory blocks to the tubes you use and put the heater, blocks and tubes into one quotation. Our company profile describes the business in more detail.

Related Laboratory Equipment

Tubes, measuring tools and alternative heaters used in the same workflow:

• Micro Centrifuge Tube, 1.5ml — microtubes for the two-block configuration
• Digital Thermometer — for checking the block temperature in a water-filled tube
• Water Bath — a wet-heating alternative for larger vessels
• Test Tube Racks — to stage tubes before and after heating

Other heating equipment is listed in our Burners range.

Frequently Asked Questions

Are the aluminium blocks included with the Block Heater?
The Block Heater is supplied with a block extraction tool; the aluminium blocks are described as accessories. Tell us which tube sizes you use and we will confirm which blocks come with your order through our contact page.

Which tube sizes can the Block Heater heat?
With one block in the well, the Block Heater takes 10, 12, 13, 16, 19 or 25 mm diameter tubes or 50 ml tubes. For 0.2, 0.5, 1.5 and 2.0 ml microtubes, two smaller blocks fit in the well together.

How stable is the Block Heater's temperature?
The Block Heater's sensitivity and uniformity are both ±0.5 °C at 60 °C. The temperature is set with an analogue dial, so for critical work confirm the actual value with a thermometer placed in a water-filled tube in the block.

What electrical supply does the Block Heater need?
The Block Heater is specified for 230 V, 50-60 Hz, with a heater rated 220-240 V, 250 W. If your laboratory has a different mains supply, please ask us before ordering so that we can advise on a suitable option.

Why use a Block Heater instead of a water bath?
A Block Heater needs no water, so there is no evaporation, no scale to clean and less risk of water reaching tube contents. A water bath remains useful for flasks and irregular vessels that do not fit an aluminium block.

Who supplies the Block Heater?
The Block Heater is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, colleges and research laboratories in India and international markets. Calibration certificate availability should be discussed with us when you request a quotation.

What should an institutional enquiry for the Block Heater include?
For the Block Heater, state the number of units, the tube sizes you need blocks for, your mains supply and the delivery location in India or abroad. This lets us prepare one complete quotation for heaters and blocks.

Request a Quote

For pricing and block options, contact us or add the Block Heater to your enquiry cart.

Last updated: 24 September 2026