- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Bunsen Burner Tubing
Bunsen Burner Tubing (Product Code: SLE/B/02) is a 3 ft flexible neoprene hose used to carry gas from a bench outlet to a Bunsen burner in school, college and research laboratories. Its reinforced ends give a safe, convenient connection at both the burner and the gas outlet, the two points where a plain hose usually works loose first. This burner accessory is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its lab consumables range.
Specifications
| Parameter | Detail |
|---|---|
| Type | Bunsen burner gas tubing |
| Material | Flexible neoprene |
| Length | 3 ft |
| Ends | Reinforced, for safe and convenient connection to the burner and the gas outlet |
| Product code | SLE/B/02 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is Bunsen Burner Tubing Used For?
Gas hose is the part of a burner set-up that wears out first: it gets bent sharply, stretched, splashed with chemicals and left near hot glassware. Swapping in fresh tubing on a regular schedule is one of the simplest safety steps a lab can take, and the 3 ft length reaches from a bench tap to the working area without loops of hose trailing across the bench.
To fit it, push one reinforced end fully over the burner inlet and the other over the gas outlet, then brush soapy water over both joints before lighting: bubbles mean a leak. Route the hose away from the flame and hot plates. Lab managers buying chemistry consumables usually keep a few spare pieces so that a damaged hose can be replaced the same day.
Supplier
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana, India. The company supplies this neoprene tubing as a burner accessory, so that schools and colleges can source burners, hoses and lighters in a single order. Background on the company is on our company profile.
Related Burners
Burners and alternatives that work with gas tubing:
- Bunsen Burner with Flame Stabilizer — a no-tip burner that stays steady when the hose is attached.
- Bunsen Burner with Stopcock — lets the user shut off gas at the burner end of the hose.
- Burner Tubing — a rubber-covered flexible steel alternative offered in several lengths.
- Rubber Pipe For Bunsen Burner — a rubber hose option for labs that prefer it.
- Gas Lighter, Piezo Electric — for lighting the burner once the hose is connected.
Browse all burners and accessories in the Burners category.
Frequently Asked Questions
How long is the Bunsen Burner Tubing?
Each piece of Bunsen Burner Tubing (SLE/B/02) is 3 ft long. That usually reaches from a bench gas tap to the working area without spare hose trailing across the bench; for other lengths, compare the Burner Tubing listed in the same category.
What is Bunsen Burner Tubing made of?
Bunsen Burner Tubing is made of flexible neoprene, a synthetic rubber, and has reinforced ends at both the burner and gas-outlet connections. The reinforced ends are what give the safe, convenient connection that a teaching laboratory needs.
Will the Bunsen Burner Tubing fit my burner and gas tap?
Bunsen Burner Tubing is intended for standard burner-to-outlet connections, but its bore size is not listed in our product details. Send the inlet and outlet sizes of your burners and taps through the contact page and we will confirm the fit.
When should Bunsen burner tubing be replaced?
Replace Bunsen Burner Tubing as soon as it shows cracks, stiffness, cuts, burn marks or a loose fit at either end, and at once if a soapy-water check reveals a leak. Keeping a few spare pieces lets a damaged hose be swapped immediately.
Can Bunsen Burner Tubing be used with LP gas as well as natural gas?
The gas type is not specified for Bunsen Burner Tubing in our product details. Tell us whether your laboratory uses natural gas or LP gas, and the supply pressure, and we will advise on suitability before you order.
Who supplies the Bunsen Burner Tubing?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Bunsen Burner Tubing (SLE/B/02) as an accessory in its burner range. Schools, colleges and dealers in India and international markets can order it together with burners and lighters.
What should a quotation request for this tubing include?
For Bunsen Burner Tubing, state the product code SLE/B/02, the number of pieces needed, any burners or lighters to be quoted alongside, and the delivery location. Send these details through the contact page or add the item to the enquiry cart.
Request a Quote
To order Bunsen Burner Tubing (SLE/B/02), send your requirement through the contact page or add it to the enquiry cart with your burners.
Last updated: 24 September 2026
