- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Burner Tube
Burner Tube (Product Code: SLE/B/24) is a 1 metre length of gas tubing used to carry fuel gas from the laboratory gas tap to a Bunsen burner in school, college and institute labs. Both ends are reinforced so they push onto the burner inlet and the tap nozzle and stay firmly in place. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as one of the everyday accessories in its school lab equipment range.
Key Details
| Parameter | Detail |
|---|---|
| Type | Gas supply tube for laboratory burners |
| Length | 1 metre |
| Ends | Reinforced, for fitting to a Bunsen burner and a gas tap |
| Purpose | Connecting a bench burner to the laboratory gas supply |
| Product code | SLE/B/24 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Burner Tube Used For?
Every gas burner on a practical bench needs a sound connection to its tap, and this tube provides it. The 1 metre length lets students place the Bunsen burner comfortably away from the tap and from their books, while the reinforced ends resist the splitting and stretching that happen when softer tubing is pushed on and pulled off nozzles day after day.
For a safe school lab setup, push each end fully onto its nozzle, route the tube so that it does not lie across a tripod, hot plate or flame, and turn the tap off at the bench, not just at the burner, when work ends. Check the tube for cracks, hardening or loose ends at the start of each term, and brush soapy water over the joints if you suspect a leak: bubbles show where the gas is escaping.
Supplier
Jain Scientific Equipments Private Limited, known to customers by its trading name ScienceLab, supplies the Burner Tube from Ambala, Haryana, India. Laboratories can order the tubing together with burners, lighters and other bench accessories in a single enquiry, for delivery to institutions and distributors in India and international markets. Details about the company are on our company profile.
Related Burners
Burners that this tube connects to, and an alternative tubing option:
- Bunsen Burners — general-purpose burners for the student bench
- Bunsen Burner with Stopcock — adds gas control at the burner itself
- Adjustable Bunsen Burner — a burner with adjustable flame for varied heating tasks
- Bunsen Burner Tubing — another gas tubing listing in the same range, for comparison
All burners, tubing and lighters are grouped in our Burners range.
Frequently Asked Questions
How long is the Burner Tube?
The Burner Tube is 1 metre long, enough to reach from a bench gas tap to a Bunsen burner placed at a safe working distance from the tap, books and other apparatus on the bench.
Why are the ends of the Burner Tube reinforced?
The reinforced ends of the Burner Tube are the parts that grip the burner inlet and the gas tap. They help the tube hold its fit and resist splitting after it is pushed on and pulled off nozzles repeatedly.
Can the Burner Tube be cut to a shorter length?
We advise against cutting the Burner Tube. Cutting removes a reinforced end, and a plain cut end will not grip a nozzle as securely, which could let gas escape at the joint during a practical.
Will the Burner Tube suit LPG and natural gas taps?
The bore size and gas rating of the Burner Tube are not listed in our current product information. Share your tap and burner details via our contact page and we will confirm suitability before you order.
When should the Burner Tube be replaced?
Replace the Burner Tube as soon as it shows cracks, becomes stiff, or no longer grips the nozzles tightly. Regular visual checks at the start of each term are more reliable than relying on a fixed replacement interval.
Who supplies the Burner Tube?
The Burner Tube is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, which offers it alongside its range of laboratory burners so that a complete gas connection can be ordered from one source.
Can we order Burner Tubes for a whole laboratory?
Yes. The Burner Tube can be supplied in bulk to schools, colleges and distributors in India and international markets. Include the quantity and delivery location in your enquiry so we can prepare a complete quotation.
Request a Quote
For pricing on single tubes or laboratory quantities, contact us or add the Burner Tube to your enquiry cart.
Last updated: 24 September 2026
