- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Heating mantles give flameless heating of round-bottom flasks for college and university chemistry departments, pharmacy and technical institutes, and senior-school labs running distillation practicals. Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, supplies this Heating Mantle range. The mantle cradles the flask in a heated, insulated bowl, so heat reaches the glass evenly with no open flame near the contents, which is why mantles are widely used for distillation and reflux set-ups and when working with flammable solvents.
Heating Mantles by Type
| Type | What it covers | Example products |
|---|---|---|
| Single-flask mantles | Standard mantles for one flask, including models named for 250 ml and 1000 ml flasks | Heating Mantle, Heating Mantle 250ml, Heating Mantle 1000ml |
| Digital mantles | Mantles listed with digital control of the heating | Digital Heating Mantles, Digital Heating Mantle With Stirrer |
| Mantles with stirring | Heating combined with stirring of the flask contents | Heating Mantle With Stirrer (Rota Mantle) |
| Multi-position mantles | Several heating positions in one unit for group practicals or parallel runs | Multi Position Heating Mantle |
Featured Heating Mantle Products
| Product | Product Code | Typical Use |
|---|---|---|
| Heating Mantle | SLE/LHM/02 | General flask heating for distillation and reflux |
| Heating Mantle 250ml | SLE/LHM/07 | Small-scale preparations in 250 ml flasks |
| Heating Mantle 1000ml | SLE/LHM/06 | Larger volumes in 1000 ml flasks |
| Digital Heating Mantles | SLE/LHM/03 | Heating where a digital readout is preferred |
| Heating Mantle With Stirrer (Rota Mantle) | SLE/LHM/04 | Reactions that need heating and mixing together |
| Multi Position Heating Mantle | SLE/LHM/05 | Several student flasks heated side by side |
Manufacturing & Supply
Heating mantles in this range are supplied by Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab. Its manufacturing premises at 449, HSIIDC Industrial Area, Saha, Ambala hold Factory Licence AMB-ONLINE-CHD-J-414, and the company exports under IEC AAECJ8618A registered with DGFT. Mantles can be quoted singly, as matched sets for a chemistry department, or in bulk for institutional and tender orders in India and abroad.
Related Ranges
- Laboratory – the parent section covering all heating, mixing, weighing and support sub-ranges.
- Hot Plates – flat heating surfaces for beakers and flat-bottomed vessels, where a mantle is shaped for round-bottom flasks.
- Burners – open-flame heating, the alternative when flammable vapours are not a concern.
- Laboratory Stirrer – magnetic stirrers and stir bars for mixing without a mantle.
- Retort Clamp and Stand bases, Rods and Rings – for holding the flask neck and condenser above the mantle.
- Glassware Flasks – flasks to pair with the mantle size you choose.
Frequently Asked Questions
What flask sizes do the listed mantles cover?
Two models are named by flask size, 250 ml and 1000 ml. For the other models, tell us the flask volume you use and the matching model will be confirmed with your quotation.
When should we use a heating mantle instead of a hot plate?
Use a mantle for round-bottom flasks, especially in distillation, reflux or solvent work, because it wraps the flask and avoids an open flame. A hot plate suits flat-bottomed beakers and conical flasks.
Are there mantles that also stir?
Yes. The Heating Mantle With Stirrer (Rota Mantle) and the Digital Heating Mantle With Stirrer combine heating with stirring of the flask contents.
Is there an option for a whole class to heat flasks at once?
The Multi Position Heating Mantle provides several heating positions in one unit, which helps in group practicals; single mantles can also be ordered in sets.
What details should a heating mantle enquiry include?
Model name or code, flask size, quantity, mains voltage at your site and the delivery destination.
Request a Quote or Catalogue
For a heating mantle quotation or product catalogue, write to ScienceLab, or save your chosen mantles in the cart and send them together.
Last updated: 23 September 2026
Digital Heating Mantle With Stirrer
Digital Heating Mantle With Stirrer (Product Code: SLE/LHM/01) heats and stirs a flask at the same time, combining uniform mantle heating with a stirring motor in one two-tier unit. A PID microprocessor controller regulates temperature through an external probe, the stirring speed is varied smoothly up to 1200 rpm, and the heating element can reach 350 °C. Chemistry, pharmacy and research laboratories use it wherever a reaction mixture must be held at a set temperature while being stirred. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as lab equipment for research and teaching laboratories in India and international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Digital heating mantle with built-in stirring |
| Construction | Two-tier: heating element in the upper part, stirring motor in the lower part |
| Temperature control | PID microprocessor controller regulating via an external temperature probe |
| Heating element temperature | Up to 350 °C |
| Stirring speed | Step-less control, smooth variation up to 1200 rpm |
| Capacity options | 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml |
| Power rating options | 150 W, 200 W, 300 W, 450 W, 600 W |
| Supplied with | External temperature probe, support rods and clamps |
Typical Use
The flask sits in the upper heating tier while the motor below drives the stirring, so the contents are mixed and warmed evenly at once. Placing the external probe in the liquid, through a side neck or adapter, lets the PID controller hold the sample itself at the set temperature instead of simply heating the element, which matters for temperature-sensitive syntheses, dissolutions and extractions. Constant stirring also spreads heat through viscous mixtures and helps reduce bumping during reflux or distillation.
Choose the mantle size that matches your flask so the vessel sits snugly on the element, raise stirring speed gradually after the flask is clamped, and use the supplied support rods and clamps to hold the flask and any condenser securely. Let the mantle cool before removing the flask. For labs comparing chemistry lab equipment in India, this model suits users who want set-point control and stirring from a single bench footprint.
Manufacturer
The Digital Heating Mantle With Stirrer is manufactured by Jain Scientific Equipments Private Limited, known to customers by its ScienceLab brand and based in Ambala, Haryana. Details of our background are in the company profile.
Related Laboratory Equipment
Glassware and alternatives commonly used with a stirred mantle:
- Round Bottom Flask — flasks to match the mantle's capacity
- Liebig Condenser — for reflux or distillation above the heated flask
- Digital Heating Mantles — the same PID-controlled heating without the stirring motor
- Heating Mantle With Stirrer (Rota Mantle) — a stirred mantle with energy-regulator heat control
- Hotplate & Stirrer, Digital — for flat-bottomed beakers and flasks
Compare every model in the Heating Mantle category.
Frequently Asked Questions
What does the PID controller actually regulate?
It regulates temperature using the external probe, so with the probe in the liquid the controller works on the sample temperature.
How hot and how fast can it go?
The heating element can reach 350 °C, and stirring speed varies step-lessly up to 1200 rpm.
Which sizes are available?
Capacities of 250, 500, 1000, 2000, 3000 and 5000 ml, with power ratings from 150 W to 600 W. The rating for your chosen capacity is confirmed in the quotation.
What is included?
An external temperature probe, support rods and clamps come with the mantle.
Is a stirring bar supplied, and what mains supply is required?
Neither is stated in our listing. Please contact us so we can confirm the stirring accessory and electrical details for your order.
Can a calibration certificate be provided for the controller?
Please raise any calibration documentation requirement through our contact page; we will discuss what can be arranged.
Do you supply multiple units or export?
Yes, we supply laboratories and distributors in India and international markets. Share quantities, capacities and destination; warranty terms are confirmed in the quotation.
Request a Quote
Tell us the capacity you need via our contact page, or add this mantle to the enquiry cart for a quotation.
Last updated: 24 September 2026
Heating Mantle
Heating Mantle (Product Code: SLE/LHM/02) is a general-purpose mantle for heating flasks and other glassware evenly, without an open flame. The vessel rests directly on a flexible, insulated heating element anchored in glass fabric inside a rolled aluminium body, so it is warmed uniformly without substantially increasing the risk of the glass shattering. An energy regulator controls output up to 350 °C, and the mantle is offered in sizes from 50 ml to 5000 ml. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a laboratory equipment manufacturer in India supplying schools, colleges and industry here and in international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Heating mantle with energy-regulator control |
| Body | Rolled aluminium |
| Heating element | Flexible, insulated, anchored securely in glass fabric |
| Maximum temperature | Up to 350 °C |
| Control | Energy regulator |
| Capacity options | 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml |
| Power rating options | 60 W, 150 W, 200 W, 300 W, 450 W, 600 W |
| Suitable vessels | Glassware vessels such as flasks, placed directly on the heating element |
Typical Use
Heating mantles are the usual heat source for simple and fractional distillation, reflux and solvent removal, especially where flammable liquids make a naked flame unwelcome. The flask nests in the glass-fabric element, which wraps heat around its lower surface rather than concentrating it at one hot spot, so the contents warm steadily and the glass is spared the thermal shock a direct flame can cause. The energy regulator sets how much power reaches the element; start low, watch the liquid, and increase in steps until the boil or reflux rate is where you want it.
Pick the mantle size that matches your flask so the glass sits in full contact with the element, never switch it on empty, and support the flask and any condenser independently with a stand and clamps. Wipe up spills only after the unit has cooled, keeping liquids out of the glass fabric. With eight capacities to choose from, a single model can cover everything from micro-scale work to large batches, which helps labs standardise their distillation apparatus in India and abroad.
Manufacturer
This mantle is produced by Jain Scientific Equipments Private Limited, whose trading name is ScienceLab. The company works from Ambala in Haryana, India, and describes its operations in the company profile.
Related Laboratory Equipment
Items that complete a mantle-heated distillation or reflux set-up:
- Distillation Flask — a side-arm flask for simple distillation on the mantle
- Round Bottom Flask — standard flasks in sizes that nest in the element
- Retort Stand — independent support for the flask and condenser above the mantle
- Three Prong Swivel Clamp — grips the flask neck on the stand
- Digital Heating Mantles — a PID-controlled option when set-point accuracy matters
All models are listed in the Heating Mantle category.
Frequently Asked Questions
How is the temperature controlled?
By an energy regulator, with the mantle able to reach up to 350 °C.
What sizes can I order?
Capacities of 50, 100, 250, 500, 1000, 2000, 3000 and 5000 ml, with power ratings between 60 W and 600 W; the rating for each capacity is confirmed in your quotation.
Can I heat a beaker in it?
The mantle is designed for glassware vessels such as flasks resting directly on the element. For flat-bottomed beakers a hot plate is usually more practical.
Are support rods and clamps included?
They are not listed for this model. A retort stand and clamp can be quoted with the mantle.
Why use a mantle instead of a burner?
The glass-fabric element heats the flask uniformly without substantially increasing the risk of shattering, and there is no open flame near volatile liquids.
What electrical supply and warranty apply?
Supply voltage is not stated in our listing, and warranty is confirmed per quotation — contact us for both.
Is bulk and export supply available?
Yes, for laboratories and distributors in India and international markets; include capacities and quantities in your enquiry.
Request a Quote
Send the capacities you need through our contact page, or add the Heating Mantle to the enquiry cart.
Last updated: 24 September 2026
Digital Heating Mantles
Digital Heating Mantles (Product Code: SLE/LHM/03) bring set-point temperature control to mantle heating of round bottom flasks. A PID microprocessor controller works from an external temperature probe to give precise regulation, while the flexible, insulated heating element anchored in glass fabric inside a rolled aluminium body warms the flask uniformly without substantially increasing the risk of glass shattering. The element can reach 350 °C, and the external probe, support rods and clamps are included. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a laboratory equipment supplier in India serving institutions at home and in international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Digital heating mantle |
| Body | Rolled aluminium |
| Heating element | Flexible, insulated, anchored securely in glass fabric |
| Temperature control | PID microprocessor controller with external temperature probe |
| Heating element temperature | Up to 350 °C |
| Suitable vessels | Round bottom glassware vessels such as flasks |
| Supplied with | External temperature probe, support rods and clamps |
Typical Use
This mantle is chosen when a procedure calls for a defined temperature rather than just “more” or “less” heat — controlled reflux, gentle solvent removal, or distillation of mixtures that should not be overheated. With the probe placed in the liquid, the PID controller adjusts power continuously to hold the sample at the chosen value and keep overshoot small, something a simple energy regulator cannot do. Pharmacy college lab equipment lists and research groups often favour this kind of control for extractions and preparations where repeatability matters.
For best results, insert the probe through a side neck so its tip sits in the liquid without touching the glass, and mount the flask and condenser with the supplied support rods and clamps before switching on. Set a target a little below the boiling point for slow evaporation, or just above it for steady reflux. Let the mantle cool before moving the flask, and keep liquids away from the glass-fabric element.
Manufacturer
Behind the ScienceLab name is Jain Scientific Equipments Private Limited, an Ambala-based private limited company (CIN U29309HR2020PTC087597). Its mantles and other apparatus are manufactured at the company's licensed premises at 449, HSIIDC Industrial Area, Saha, Ambala, under Factory Licence AMB-ONLINE-CHD-J-414. Our company profile has further information.
Related Laboratory Equipment
Glassware and alternative mantles for probe-controlled heating:
- Round Bottom Flask With Two Neck — one neck for the temperature probe, the other for a condenser
- Fractional Distillation Assembly — for separations that benefit from steady, controlled heating
- Digital Heating Mantle With Stirrer — the same style of control with built-in stirring
- Heating Mantle — an energy-regulator model for routine heating
See all options in the Heating Mantle category.
Frequently Asked Questions
How is this different from the standard Heating Mantle?
It uses a PID microprocessor controller with an external probe instead of an energy regulator, and it comes with the probe, support rods and clamps.
Where should the temperature probe go?
In the liquid, usually through a side neck, so the controller responds to the sample temperature.
What is the maximum temperature?
The heating element can reach 350 °C.
Which flask capacities are available?
Capacities are not given in our current listing for this model. Please tell us the flask size you use and we will confirm the matching mantle.
Does it stir the contents?
No stirring function is listed. If you need stirring, see the Digital Heating Mantle With Stirrer.
Is calibration documentation available?
Discuss any calibration paperwork you need for the controller through the contact page before ordering.
Can you supply several units or ship overseas?
Yes, to laboratories and distributors in India and international markets; warranty terms and supply voltage are confirmed in the quotation.
Request a Quote
To get a price for Digital Heating Mantles, send us your requirement or add the item to the enquiry cart.
Last updated: 24 September 2026
659.jpg)
Heating Mantle With Stirrer (Rota Mantle)
Heating Mantle With Stirrer (Rota Mantle) (Product Code: SLE/LHM/04) is a two-tier unit that stirs the contents of a flask while heating it uniformly: the upper part holds the heating element and the lower part houses the stirring motor. Heat output is set with an energy regulator, and step-less speed control varies stirring smoothly up to 1200 rpm. Offered from 50 ml to 5000 ml, it suits teaching and routine laboratory work where mixing and heating have to happen together. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a chemistry lab instruments supplier to institutions in India and international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Heating mantle with stirrer (Rota Mantle) |
| Construction | Two-tier: heating element in the upper part, stirring motor in the lower part |
| Heat control | Energy regulator |
| Stirring speed | Step-less control, smooth variation up to 1200 rpm |
| Capacity options | 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml, 2000 ml, 3000 ml, 5000 ml |
| Power rating options | 60 W, 150 W, 200 W, 300 W, 450 W, 600 W |
Typical Use
Stirring while heating keeps solids suspended and stops them settling onto the hot glass, so the Rota Mantle is a natural fit for dissolving slow-to-dissolve solids, recrystallisation, and reflux of mixtures that contain a solid or two immiscible liquids. College practicals such as ester preparation or saponification benefit from the even temperature that constant mixing gives. Because the energy regulator sets power rather than a temperature, a thermometer held in the flask is the easiest way to follow what the contents are actually doing.
Start the stirring before turning up the heat so warmth spreads from the first minute, raise the speed gradually to avoid splashing, and clamp the flask independently so vibration cannot move it off the element. Select the capacity that matches your flask for full contact. For departments equipping several benches, the wide size range makes it practical lab equipment for college teaching labs, from small-scale student preparations to larger demonstration batches.
Manufacturer
The Rota Mantle is one of the heating products made by Jain Scientific Equipments Private Limited in Ambala, Haryana, and sold under the company's ScienceLab label. Read our company profile to find out more.
Related Laboratory Equipment
Accessories and alternatives for stirred heating:
- Round Bottom Flask, Wide Neck — easier to add solids to a stirred flask
- Laboratory Thermometer — for monitoring the contents, since the regulator sets power rather than temperature
- Thermometer Clamp — holds the thermometer at the right depth in the flask
- Retort Stand — independent support for the flask and any condenser
- Digital Heating Mantle With Stirrer — a PID-controlled model with an external probe
Explore every mantle in the Heating Mantle category.
Frequently Asked Questions
How is the heat controlled?
With an energy regulator that sets the heating power; use a thermometer in the flask to follow the actual temperature.
How fast can it stir?
Stirring speed varies step-lessly up to 1200 rpm.
Which sizes are offered?
Capacities from 50 ml to 5000 ml and power ratings from 60 W to 600 W; the rating for each size is confirmed in the quotation.
What is the maximum temperature?
A maximum temperature is not stated in our listing for this model. Contact us and we will confirm it for the size you need.
How does it compare with the Digital Heating Mantle With Stirrer?
Both stir up to 1200 rpm; the digital model adds PID control through an external probe and lists a probe, support rods and clamps as included.
Are support rods, clamps or a stirring element included?
These are not listed for the Rota Mantle; please ask us to confirm what is packed and to quote any extras.
Can you supply bulk or export orders?
Yes, to institutions and distributors in India and international markets; warranty terms and supply voltage are confirmed in each quotation.
Request a Quote
Let us know the capacities and quantities you need via the contact page, or add the Rota Mantle to your enquiry cart.
Last updated: 24 September 2026
Multi Position Heating Mantle
Multi Position Heating Mantle (Product Code: SLE/LHM/05) is a bench unit designed to heat between 3 and 6 round bottom flasks simultaneously, with each heating mantle regulated by its own built-in temperature controller. The heating elements operate up to 350 °C, while a vented housing and air-flow design keep the outside of the unit cool to touch. Support rods and clamps are included. It is often used for distillation, extraction and reflux wherever several flasks must be heated at once, and it is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, as laboratory distillation apparatus for India and international markets.
Specifications
| Parameter | Detail |
|---|---|
| Type | Multi-position heating mantle |
| Positions | Designed to heat between 3 and 6 round bottom flasks simultaneously |
| Control | Individual built-in temperature controller for each heating mantle |
| Maximum operating temperature | 350 °C (heating elements) |
| Housing | Vented, with an air-flow design that keeps the unit cool to touch |
| Flask capacity options | 100 ml, 250 ml, 500 ml, 1000 ml |
| Power rating options | 180 W, 360 W, 450 W, 600 W, 900 W, 1200 W, 1800 W |
| Supplied with | Support rods and clamps |
| Typical applications | Distillation, extraction and reflux |
Typical Use
A multi-position mantle earns its bench space in two situations. In teaching laboratories, several students or pairs can run the same reflux or distillation side by side from one unit, so a whole practical group finishes together. In analytical and research work, the separate controllers let an analyst run replicate extractions in parallel, or compare the same preparation at different heat settings without needing a row of individual mantles and extension leads.
Fit each flask with its own reflux condenser or distillation head, fix the glassware to the supplied support rods with the clamps, and set every position individually before switching on. Leave unused positions switched off, keep the vents unobstructed so the housing stays cool, and route coolant tubing so it cannot touch the heated flasks. Checking that each flask matches the position's capacity ensures full contact with the element and even heating.
Manufacturer
Manufacturing of this unit is carried out by Jain Scientific Equipments Private Limited of Ambala, Haryana, the firm that owns the ScienceLab trade name and supplies laboratories in India and abroad. Our company profile explains more about us.
Related Laboratory Equipment
Glassware and fittings for parallel heating set-ups:
- Liebig Condenser — one per flask for parallel reflux or distillation
- Round Bottom Flask — choose sizes that match the positions' flask capacity
- Boss Head — for attaching additional clamps to the support rods
- Distillation Apparatus — a complete distillation glassware set for each position
- Heating Mantle — a single-position model for smaller workloads
Compare other models in the Heating Mantle category.
Frequently Asked Questions
How many flasks can it heat at once?
It is designed for between 3 and 6 round bottom flasks simultaneously; the number of positions for your unit is confirmed in the quotation.
Can each flask be run at a different temperature?
Yes. Every heating mantle has its own built-in temperature controller.
What flask sizes does it take?
Flask capacities of 100, 250, 500 and 1000 ml are listed, with power ratings from 180 W to 1800 W depending on configuration.
How hot does it get, and is the housing safe to touch?
The heating elements operate up to 350 °C; the vented housing and air flow keep the unit's exterior cool to touch, though flasks and elements remain hot.
What is included?
Support rods and clamps are included. Flasks and condensers are ordered separately.
Is a calibration certificate available for the controllers?
Please discuss any calibration documentation requirement with us through the contact page.
What should an institutional enquiry include?
The number of positions, flask size, quantity and delivery location in India or abroad; supply voltage and warranty terms are confirmed in our quotation.
Request a Quote
Share your configuration on our contact page or add the Multi Position Heating Mantle to the enquiry cart.
Last updated: 24 September 2026
Heating Mantle 1000ml
Heating Mantle 1000ml (Product Code: SLE/LHM/06) is an electric bench heater that holds a 1000 ml flask in its heating well and warms the glass evenly from below and around the sides, without an open flame. Chemistry teachers, college demonstrators and laboratory technicians use it for boiling, refluxing and distilling liquids at bench scale, where a steady, controllable heat source matters more than speed. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab) in Ambala, India, and forms part of our chemistry lab equipment in India for schools, colleges and working laboratories.
Specifications
| Parameter | Detail |
|---|---|
| Flask capacity | 1000 ml |
| Supply | 220 V, 50 Hz |
| Power | 350 W |
| Maximum temperature | 450 °C |
| Control | Analogue control, simple to operate |
| Indicators | Power indicator light and heating indicator light |
| Base | Four rubber feet for stability during use |
| Exterior size | Φ 260 mm × 200 mm |
| Net weight | 3.5 kg |
| Gross weight | 4 kg |
| Packing size | 290 × 290 × 220 mm |
Typical Use
The 1000 ml size suits class demonstrations and practical work where a litre-scale batch is heated for a long period: refluxing a reaction mixture under a condenser, running a simple or fractional distillation, concentrating an extract or bringing an aqueous solution to a controlled boil. Because the flask sits inside the mantle rather than over a burner, heat reaches a larger area of the glass and there is no flame near flammable vapours. Laboratories assembling laboratory distillation apparatus in India often pair this mantle with a round bottom flask, a condenser and a retort stand to make a complete, stable set-up.
For best results, choose a flask that fills the well so the glass is in full contact with the mantle, clamp the flask neck to a stand so the mantle only supports its weight, and turn the analogue knob up in steps while watching the heating lamp and the liquid. Add anti-bumping granules before boiling, never switch the mantle on empty at a high setting, and let it cool on its rubber feet before moving it or wiping the surface.
Manufacturer
This mantle is produced by Jain Scientific Equipments Private Limited, the company behind the ScienceLab brand, from its base in Ambala, Haryana. Our team supplies heating equipment and glassware to teaching and research laboratories across India and international markets, and can advise on matching mantle sizes to the flasks you already hold. Read more about the company on our company profile page.
Related Laboratory Equipment
These items are used alongside the 1000 ml mantle in the same heating, reflux or distillation workflow:
- Round Bottom Flask — the vessel shape a heating mantle is designed to cradle.
- Liebig Condenser — fits above the flask for reflux or to condense distillate.
- Retort Stand — holds the flask neck and condenser steady over the mantle.
- Heating Mantle With Stirrer (Rota Mantle) — an alternative when the mixture must be stirred while heating.
- Heating Mantle 250ml — a smaller mantle for student-scale flasks.
Browse every size and control type in our Heating Mantle category.
Frequently Asked Questions
Which flask size does this mantle take?
It is built for a 1000 ml flask. A much smaller flask will not sit in full contact with the heating surface, so for small volumes a smaller mantle from the same category is the better choice.
How hot does it get?
The mantle heats to a maximum of 450 °C. The temperature actually reached by the liquid depends on the setting of the analogue control, the contents and the volume in the flask.
What electrical supply does it need?
It runs on 220 V, 50 Hz and draws 350 W. If your laboratory uses a different mains supply, please contact us before ordering so we can discuss options.
Is a flask included with the mantle?
This listing is for the heating mantle; glassware such as round bottom flasks and condensers is listed separately. Your quotation will state exactly what is packed.
Can it stir the liquid while heating?
No stirring function is described for this model; it provides analogue-controlled heating only. For combined heating and stirring, look at the Rota Mantle listed above.
Can you supply a calibration certificate?
Please discuss calibration certificate availability with us through the contact page when you request a quotation.
What is the shipping size and weight?
Each unit is packed in a carton of 290 × 290 × 220 mm with a gross weight of 4 kg (net 3.5 kg), which helps when planning freight for bulk or export orders to India and international markets.
Request a Quote
To order the Heating Mantle 1000ml for your laboratory, send your quantity and delivery location through our contact page, or add it to the enquiry cart together with the flasks and condensers you need.
Last updated: 24 September 2026
Heating Mantle 250ml
Heating Mantle 250ml (Product Code: SLE/LHM/07) is a compact, controlled heating mantle for flasks of 250 ml, built around a woven glass fibre mat with a nichrome wire element inside a coated steel case. It gives students and technicians a flame-free way to warm, boil or reflux small volumes on an ordinary bench, which makes it a practical piece of school chemistry lab equipment in India for practical classes and small preparative work. The unit is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala.
Specifications
| Parameter | Detail |
|---|---|
| Flask capacity | 250 ml |
| Type | Controlled heating mantle |
| Case construction | Steel, with chemical resistant coating |
| Mantle | Woven glass fibre mat |
| Heating element | Nichrome wire |
| Insulation | Moulded silica powder |
| Element temperature | Up to 450 °C (max.) |
| Power supply | 220 V AC, 80 W |
Typical Use
A 250 ml mantle is the size most student groups need for short experiments: preparing a small ester under reflux, distilling a few tens of millilitres of a mixture, determining a boiling point range or dissolving a solid in hot solvent before recrystallisation. The glass fibre mat wraps heat around the lower part of the flask, so small volumes heat evenly and there is less risk of a hot spot cracking the glass than with a gauze and burner. Its modest 80 W rating also means several units can run side by side on one bench.
Seat the flask fully in the mantle, support the neck with a clamp, and bring the control up gradually while watching for steady boiling. The coated case resists occasional splashes, but spills should be wiped off promptly once the unit is switched off and cool; never pour liquid directly into the mantle. As a laboratory equipment supplier in India, we can advise on matching glassware so every student station is complete.
Manufacturer
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, whose manufacturing and dispatch operations are based in Ambala, Haryana. We make and supply laboratory heating equipment for schools, colleges and research laboratories, and we welcome questions on sizes, controls and quantities before you order. Learn about our background on the company profile page.
Related Laboratory Equipment
Pair the 250 ml mantle with these items for a complete small-scale heating or distillation station:
- Round Bottom Flask 250 ml — the matching flask size for this mantle.
- Straight Coolant (Condenser) — for reflux or simple distillation above the flask.
- Thermometer Clamp — holds a thermometer at the still head when recording boiling temperatures.
- Digital Heating Mantles — an alternative with digital control for more repeatable settings.
- Heating Mantle 1000ml — the larger model for litre-scale batches.
See all models in the Heating Mantle category.
Frequently Asked Questions
What is the heating element made of?
The element is nichrome wire set in a woven glass fibre mat, insulated with moulded silica powder and housed in a steel case with a chemical resistant coating.
What temperature can the element reach?
The element temperature goes up to 450 °C maximum. The liquid in the flask will be cooler than the element, depending on the control setting and the volume being heated.
How much power does it use?
It is rated at 80 W on a 220 V AC supply, low enough to run several units on a shared bench circuit. For other supply voltages, please ask us before ordering.
Can I use a smaller or larger flask in it?
It is sized for 250 ml flasks. Using a flask that does not match the well leaves gaps or overloads the mat, so pick the mantle that matches your flask size.
How should I clean it?
Switch off, unplug and let it cool, then wipe the coated case with a damp cloth. Keep liquids out of the glass fibre mat; if a flask breaks inside, stop using the mantle and contact us for advice.
Is a calibration certificate available?
Calibration certificate availability should be discussed with our team when you send your enquiry.
Do you supply sets for a whole class or for export?
Yes, we quote for multiple units for institutions across India and international markets; tell us the number of student stations and any glassware you want included.
Request a Quote
For prices and delivery on the Heating Mantle 250ml, write to us via the contact page or add it to our enquiry cart with any matching flasks and condensers.
Last updated: 24 September 2026
