- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Alcohol Lamp with Metal Cap
Alcohol Lamp with Metal Cap (Product Code: SLE/B/04) is a 4 oz spirit lamp used for gentle, portable heating in classrooms and labs that have no gas supply. A metal screw-cap seals the fuel, and a separate metal cap is placed over the wick to put out the flame and stop evaporation between lessons; replacement wicks are available. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for school laboratory setups across the country and abroad.
Specifications
| Parameter | Detail |
|---|---|
| Type | Alcohol (spirit) lamp with wick |
| Size | 4 oz |
| Caps | Metal screw-cap, plus a metal cap for extinguishing the flame and preventing evaporation |
| Spares | Replacement wicks available |
| Product code | SLE/B/04 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Alcohol Lamp with Metal Cap Used For?
Spirit lamps are the usual heat source in classrooms without piped gas and in lessons where a small, quiet flame is enough: warming a test tube of water, melting wax, heat-fixing a smear on a microscope slide, or flaming a wire loop in an introductory microbiology practical. Because the flame is modest, younger students can work with it under supervision more comfortably than with a gas burner.
Fill the lamp only when it is cold and unlit, wipe off any spilled fuel, and trim the wick so a short length stands above the holder. To put the flame out, lower the metal cap over the wick instead of blowing on it, and leave the cap on so the fuel does not evaporate before the next lesson. Keep the refill bottle away from the bench while the lamp is lit.
What to Specify When Ordering
- Number of lamps: one per student group or workstation is typical for a class.
- Replacement wicks: how many spare wicks to include, so a charred wick can be changed straight away.
- Fuel and supports: whether burning alcohol or a burner stand should be quoted with the lamps, as they are listed separately.
OEM Manufacturer
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this spirit lamp. The lamp is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and is supplied factory-direct to schools, colleges, dealers and importers, so replacement wicks and repeat orders are handled by the maker itself. For vendor registration, institutional buyers can use the company's GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. More about us is on our company profile.
Related Burners
Fuel, supports and alternatives often ordered with the lamp:
- Denatured Ethanol (Alcohol for burning) — fuel for spirit lamps.
- Alcohol Burner Stand — holds a small beaker or dish above the flame.
- Wicks For Glass Spirit Burner — spare wicks; confirm the fit for this lamp when ordering.
- Alcohol Burner, Wickless — a tip-resistant alternative that uses a torch instead of a wick.
- Test Tube Holder — for holding tubes safely in the flame.
More heating equipment is listed in the Burners category.
Frequently Asked Questions
What size is the Alcohol Lamp with Metal Cap?
The Alcohol Lamp with Metal Cap (SLE/B/04) is a 4 oz size. That is a convenient bench lamp for small heating tasks such as warming test tubes, heat-fixing slides and flaming wire loops in school practicals.
How do I put out the flame on this alcohol lamp?
Lower the metal cap of the Alcohol Lamp with Metal Cap over the wick; never blow the flame out. Leaving the cap in place afterwards also limits evaporation of the fuel, so the lamp is ready for the next lesson.
Are replacement wicks available for the Alcohol Lamp with Metal Cap?
Yes, replacement wicks are available for the Alcohol Lamp with Metal Cap. State how many spare wicks you want in your enquiry so they can be quoted and packed together with the lamps.
Which fuel should the Alcohol Lamp with Metal Cap use?
Use only alcohol intended for burning, such as denatured ethanol, in the Alcohol Lamp with Metal Cap. Never use petrol or other volatile fuels. Fuel is not listed as included and can be quoted separately with the lamps.
Who manufactures the Alcohol Lamp with Metal Cap?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Alcohol Lamp with Metal Cap. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and quotations come straight from the manufacturer.
What does a school need to include in a quotation request?
For the Alcohol Lamp with Metal Cap, give the product code SLE/B/04, the number of lamps and spare wicks, any fuel or stands required, and the delivery address in India or overseas. Send it through our contact page.
Request a Quote
Request a price for the Alcohol Lamp with Metal Cap through the contact page, or add lamps, wicks and fuel to the enquiry cart in one go. You will receive the quotation directly from the manufacturer.
Last updated: 24 September 2026
