- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Stand bases, rods and rings form the fixed foundation of any retort set-up in school chemistry and physics labs, college practical rooms and technical institutes. Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, lists 19 support items in this range: the base or frame that sits on the bench, the rod that rises from it, and the tripods and rings that hold flasks, funnels and crucibles in place. Buyers order these parts to build a retort stand for each student station.
Stand Bases, Rods and Rings by Component
| Component | What it covers | Example products |
|---|---|---|
| Stand bases and feet | The heavy base or foot that a support rod is fixed into | Stand bases 18/10 Stainless Steel, Stand Bases Steel Varnished, Foot For Rods, Foot For Rods, Stainless Steel 18/10 |
| Frames and rod fixings | H-frames and fittings for multi-rod or bench-mounted set-ups | H-Frame MINI, H-Frame Complete, Base Frame tube, 18/10 Stainless Steel, Sockets For Rods Without Thread, Table Clamp For Rods |
| Rods and complete stands | Vertical support rods, and a stand supplied with its own base plate | Rods For Stand Bases, Stand With Base Plate H-Shape |
| Tripods | Supports that hold a vessel over a burner | Tripod Cast Iron Varnished, Tripods |
| Rings | Rings that steady a conical flask or carry a crucible | Stabilizing Ring for Erlenmeyers, Crucible Retort Ring |
| Burette stands and kits | Ready stands for titration, and a combined metalware kit | Burette Stand, Burette Stand, Hard Wood, Single, Burette Stand, Hard Wood, Double, Retort Metalware Kit |
Featured Stand bases, Rods and Rings
| Product | Product Code | Typical Use |
|---|---|---|
| Stand bases 18/10 Stainless Steel | SLE/LR/01 | Base for a retort stand where a stainless steel finish is preferred |
| Stand Bases Steel Varnished | SLE/LR/02 | Varnished steel base for general student retort stands |
| Rods For Stand Bases | SLE/LR/14 | Vertical rod that carries bossheads, clamps and rings |
| H-Frame Complete | SLE/LR/09 | Frame for multi-rod apparatus assemblies |
| Tripod Cast Iron Varnished | SLE/LR/03 | Holding a beaker or dish on wire gauze over a burner |
| Crucible Retort Ring | SLE/LR/16 | Supporting a crucible or funnel on a retort stand |
| Burette Stand, Hard Wood, Double | SLE/LR/17 | Titration practicals at shared benches |
| Retort Metalware Kit | SLE/LR/19 | Ordering retort support metalware as one kit |
Manufacturing & Supply
ScienceLab is the brand under which Jain Scientific Equipments Private Limited manufactures laboratory equipment at its licensed factory at Saha, Ambala, Haryana, and this support hardware is supplied from there. Institutional buyers completing vendor registration can quote the company's GSTIN 06AAECJ8618A1ZT and its Legal Entity Identifier 3358004HRD1JIVXKYX49. Bases, rods, tripods and rings are supplied in class quantities, in bulk for tenders and distributors, and for export to international markets as well as across India.
Related Ranges
- Laboratory — the parent hub for bench apparatus and laboratory sub-ranges.
- Bosshead — the connectors that lock clamps and rings onto the rods listed here.
- Retort Clamp — the clamps that grip flasks, condensers and tubes once a stand is built.
- Burners — the heat source used beneath tripods and rings.
- Glassware Flasks — conical and round flasks held by these rings and stands.
- Chemistry Lab Equipment — the wider chemistry catalogue, which also lists an A-Shape Retort Stand Base, Retort Stand and Retort Rings.
Frequently Asked Questions
How does this range differ from the Bosshead and Retort Clamp ranges?
This page covers the base, rod, rings and tripods. Bossheads connect items to the rod, and retort clamps grip the glassware, so a complete retort stand usually combines one item from each of the three ranges.
Which base finishes are available?
Stand bases are listed in 18/10 stainless steel and in varnished steel, and tripods in varnished cast iron. Our team can confirm dimensions and rod fit for the item you select.
Is there a ready-made set?
Yes, the Retort Metalware Kit is listed as a single kit. Ask the team for its current contents so you can add any extra rods, rings or clamps your practicals need.
Which stands are used for titration?
The Burette Stand and the hard wood burette stands in single and double versions are intended for titration work, alongside burettes from the glassware ranges.
What should a quotation request include?
SLE/LR codes and quantities, the number of student stations, whether bossheads and retort clamps are needed for complete assemblies, and the delivery location.
Request a Quote or Catalogue
For a quotation on complete retort stands or individual parts, contact ScienceLab with your list, or place the items in the shopping cart and send it to us for a quotation.
Last updated: 23 September 2026
Stand bases 18/10 Stainless Steel
Stand bases 18/10 Stainless Steel (Product Code: SLE/LR/01) is a heavy, flat laboratory stand base in 18/10 stainless steel used to hold a threaded support rod upright for clamps, rings and glassware set-ups in chemistry, physics and biology labs. It has antislide rubber protection, expanded flat feet for extra stability and one adjustable foot, and is listed in four sizes weighing 1.6 to 2.4 kg. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | 18/10 stainless steel |
| Feet | Expanded, flat and heavy, for extra stability |
| Levelling | 1 adjustable foot |
| Bench protection | Antislide rubber protection |
| Rod fitting | Thread |
| Sizes (A length × B width × C height, as listed) and weight | 210 × 130 × 3 — 1.6 kg 250 × 160 × 3 — 1.9 kg 300 × 150 × 3 — 2.0 kg 315 × 200 × 3 — 2.4 kg |
| Product code | SLE/LR/01 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Stainless Steel Stand Base Used For?
A stand base is the foundation of every retort stand assembly. A support rod is screwed into the thread, then bossheads, clamps and rings are added to hold burettes, flasks, condensers or funnels at the right height. The wider and heavier the base, the less likely a tall or top-heavy set-up is to tip, which is why these bases use expanded, flat, heavy feet, while the antislide rubber keeps them from creeping across a smooth bench and the adjustable foot stops rocking on an uneven surface.
18/10 stainless steel, an alloy of roughly 18% chromium and 10% nickel, stands up well to everyday spills and repeated cleaning, so these bases suit wet chemistry, pharmacy and microbiology benches as well as school labs. Keep the heaviest part of an assembly above the footprint of the base, screw the rod fully home before loading it, and check the adjustable foot whenever the stand is moved. It suits anyone equipping a retort stand lab in India who wants stainless fittings throughout.
What to Specify When Ordering
- Which of the four sizes you need, by its A × B × C figures or its weight (1.6, 1.9, 2.0 or 2.4 kg).
- How many bases are required per bench or per lab.
- Whether support rods, bossheads and clamps should be quoted in the same enquiry.
- The delivery location for the order.
OEM Manufacturer
Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of these stainless steel stand bases and makes them at its own licensed factory in Saha, Ambala, Haryana, India. Laboratories, schools, colleges, dealers and importers can order bases, rods and fittings together, factory-direct, from one manufacturer.
Tender and vendor-registration forms can quote the company's GSTIN 06AAECJ8618A1ZT and Legal Entity Identifier 3358004HRD1JIVXKYX49. For repeat orders or a replacement adjustable foot, ask us. Company background is on the ScienceLab profile.
Related Stand bases, Rods and Rings
Items that complete a stainless steel retort stand set-up:
- Rods For Stand Bases — the upright rod that screws into the base.
- Bossheads 18/10 Stainless Steel — fix clamps and rings to the rod in the same grade of steel.
- Retort Clamp Standard 18/10 Stainless Steel — holds flasks, condensers and tubes on the stand.
- Stand Bases Steel Varnished — a varnished steel alternative in more sizes and weights.
- Base Frame tube, 18/10 Stainless Steel — V- or H-form frames for wider apparatus.
See the full Stand bases, Rods and Rings category for more supports and fittings.
Frequently Asked Questions
What sizes does the Stand bases 18/10 Stainless Steel come in?
The Stand bases 18/10 Stainless Steel is listed in four sizes (A length × B width × C height): 210 × 130 × 3 at 1.6 kg, 250 × 160 × 3 at 1.9 kg, 300 × 150 × 3 at 2.0 kg and 315 × 200 × 3 at 2.4 kg. Exact dimensions are confirmed with each quotation.
How does the Stand bases 18/10 Stainless Steel stay stable?
The Stand bases 18/10 Stainless Steel stays steady thanks to expanded, flat and heavy feet, antislide rubber protection that grips the bench, and one adjustable foot that can be set to stop the base rocking on an uneven work surface.
Why is the Stand bases 18/10 Stainless Steel made from 18/10 steel?
The Stand bases 18/10 Stainless Steel uses 18/10 stainless steel, roughly 18% chromium and 10% nickel, because this alloy resists corrosion from everyday spills and frequent cleaning. That makes the base well suited to wet chemistry, pharmacy and biology labs.
Is a support rod included with the Stand bases 18/10 Stainless Steel?
Support rods are offered as a separate catalogue item, Rods For Stand Bases. When enquiring about the Stand bases 18/10 Stainless Steel, mention the size you need and we will confirm a compatible rod in the quotation.
Who manufactures the Stand bases 18/10 Stainless Steel?
The Stand bases 18/10 Stainless Steel is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come directly from the manufacturer.
Can the Stand bases 18/10 Stainless Steel be ordered in bulk?
Yes. The Stand bases 18/10 Stainless Steel can be ordered in quantity for new laboratories, dealers and importers in India and international markets. State the sizes, quantities and delivery location, and the manufacturer will prepare a combined quotation.
Request a Quote
Send your stand base requirements through our contact page or add the item to the enquiry cart, listing the sizes you need. Quotations come direct from the manufacturer.
Last updated: 24 September 2026
Stand Bases Steel Varnished
Stand Bases Steel Varnished (Product Code: SLE/LR/02) is a varnished steel laboratory stand base used as the weighted foot of a retort stand, holding a threaded support rod for clamps, rings and glassware in school and college labs. It is listed in nine sizes weighing from 0.8 kg to 5.0 kg, each with a thread for the rod and one adjustable foot. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | Steel, varnished |
| Rod fitting | Thread |
| Levelling | 1 adjustable foot |
| Sizes (A length × B width × C height, as listed) and weight | 180 × 100 × 6 — 0.8 kg 210 × 130 × 6 — 1.3 kg 250 × 160 × 6 — 2.0 kg 300 × 150 × 6 — 2.2 kg 315 × 200 × 6 — 3.0 kg 210 × 130 × 8 — 1.8 kg 250 × 160 × 8 — 2.6 kg 315 × 200 × 8 — 4.0 kg 315 × 200 × 10 — 5.0 kg |
| Product code | SLE/LR/02 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Varnished Steel Stand Bases Used For?
Every retort stand needs a base heavy enough for the load it carries, and the wide spread of weights here lets a lab match the base to the job. A light 0.8 kg base is enough for a single test-tube clamp on a student bench, while the 4.0 kg and 5.0 kg bases give a tall distillation or reflux assembly, or two clamps reaching out sideways, a much lower risk of tipping. Several footprints are offered in more than one C height, so the same bench space can take a lighter or heavier base.
The varnish coats the steel, helping to protect its surface from moisture in everyday use. Wipe chemical spills off promptly, dry the base after cleaning, and keep it out of burner flames. Screw the support rod fully into the thread and turn the adjustable foot until the base sits without rocking. For schools furnishing chemistry lab equipment in India across many benches, these bases are a practical, bench-by-bench choice.
What to Specify When Ordering
- The size by its A × B × C figures; note that the 210 × 130, 250 × 160 and 315 × 200 footprints come in more than one C height.
- The weight needed for your heaviest set-up, from 0.8 kg up to 5.0 kg.
- How many bases of each size are needed per lab.
- Any support rods, bossheads or rings to be quoted alongside the bases.
OEM Manufacturer
These varnished bases are manufactured by Jain Scientific Equipments Private Limited, the company trading as ScienceLab, which is their OEM (original equipment manufacturer) and produces them at its own licensed factory at Saha, Ambala, Haryana, India. Schools fitting out several benches, colleges, dealers and importers receive quotations for mixed sizes straight from the maker.
Repeat orders in the same sizes, or a replacement adjustable foot, can be requested directly; just ask us. Read about the company on the ScienceLab profile.
Related Stand bases, Rods and Rings
Parts and alternatives that go with a varnished steel stand base:
- Rods For Stand Bases — the upright rod that screws into the base thread.
- Bosshead Malleable Cast Iron Chromium Plated — joins clamps and rings to the rod.
- Crucible Retort Ring — supports crucibles, funnels or gauze on the stand.
- Stand bases 18/10 Stainless Steel — a stainless option with antislide rubber for wet benches.
- Tripod Cast Iron Varnished — a three-legged cast iron base for the same rods.
Browse the Stand bases, Rods and Rings category for all supports and rings.
Frequently Asked Questions
What sizes are available for Stand Bases Steel Varnished?
Stand Bases Steel Varnished is listed in nine sizes (A × B × C): 180 × 100 × 6, 210 × 130 × 6 or 8, 250 × 160 × 6 or 8, 300 × 150 × 6, and 315 × 200 × 6, 8 or 10. Weights range from 0.8 to 5.0 kg.
Which Stand Bases Steel Varnished size is the heaviest?
The heaviest Stand Bases Steel Varnished option is 315 × 200 × 10 at 5.0 kg, followed by 315 × 200 × 8 at 4.0 kg. These heavier bases suit tall or top-heavy assemblies, such as distillation or reflux set-ups, where tipping is a concern.
Can Stand Bases Steel Varnished be levelled on an uneven bench?
Yes. Each Stand Bases Steel Varnished has 1 adjustable foot, which can be turned to stop the base rocking on an uneven bench, so the support rod stands vertical and clamped glassware stays properly aligned.
How should the varnished finish of Stand Bases Steel Varnished be cared for?
To keep the finish of Stand Bases Steel Varnished in good condition, wipe off chemical spills promptly, dry the base after cleaning, and avoid placing it in a burner flame or on a hot plate, where heat can damage the varnish.
How do Stand Bases Steel Varnished compare with the stainless steel bases?
Stand Bases Steel Varnished is made of varnished steel and offers nine sizes up to 5.0 kg, while the Stand bases 18/10 Stainless Steel comes in four sizes and adds antislide rubber protection. Stainless bases suit benches that are wet or cleaned very often.
Who manufactures Stand Bases Steel Varnished?
Stand Bases Steel Varnished is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations for single sizes or mixed sets come directly from the manufacturer.
Request a Quote
List the sizes and quantities you need on our contact page or add the item to the enquiry cart. The manufacturer will quote each size directly.
Last updated: 24 September 2026
Tripod Cast Iron Varnished
Tripod Cast Iron Varnished (Product Code: SLE/LR/03) is a three-legged, varnished cast iron stand base with a thread that takes a support rod, used to build retort stands for clamps, rings and glassware in school, college and research labs. It is listed in two sizes, length 105 at 1.2 kg and length 145 at 2.0 kg, and the rod is ordered separately. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Tripod (three-legged) stand base |
| Material | Cast iron, varnished |
| Rod fitting | Thread; rod ordered separately |
| Sizes (A length, as listed) and weight | 105 — 1.2 kg 145 — 2.0 kg |
| Product code | SLE/LR/03 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Cast Iron Tripod Base Used For?
A base that stands on three legs touches the bench at only three points, so it sits firmly without rocking even when the work surface is not perfectly flat. That makes this tripod a steady foundation for a retort stand: screw a support rod into the thread, fit bossheads and clamps, and hold flasks, funnels or condensers above the bench. The open space between the legs also leaves room to place a burner, beaker or small hot plate close beneath the rod.
Choose the 2.0 kg size for taller rods and heavier glassware, and the 1.2 kg size for compact set-ups on student benches. Keep the load above the legs rather than reaching far outside them, and tighten the rod fully before use. Anyone looking for a tripod stand for the lab in India should note that this is a rod base, not a burner tripod for gauze. Cast iron is strong under load but can crack if dropped, so lift it with both hands.
What to Specify When Ordering
- The size: length 105 (1.2 kg) or length 145 (2.0 kg).
- The support rods to go with it, since the rod is ordered separately.
- Any bossheads, clamps or rings for the complete stand.
- Quantity and delivery location.
OEM Manufacturer
ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM (original equipment manufacturer) of this cast iron tripod and makes it at its own licensed factory in Saha, Ambala, Haryana, India. Since the tripod and the rods it needs are both offered by the same manufacturer, a lab can order a complete stand in one enquiry and receive the quotation from the source.
For repeat orders or advice on matching fittings, ask us directly. The ScienceLab profile has more about the company.
Related Stand bases, Rods and Rings
Parts needed to turn the tripod into a working stand, plus alternative bases:
- Rods For Stand Bases — the rod that screws into the tripod, ordered separately.
- Bosshead Malleable Cast Iron Chromium Plated — fixes clamps and rings to the rod.
- Crucible Retort Ring — holds a crucible, funnel or gauze on the stand.
- Stand Bases Steel Varnished — rectangular steel bases in nine sizes.
See every base and fitting in the Stand bases, Rods and Rings category.
Frequently Asked Questions
Is a rod included with the Tripod Cast Iron Varnished?
No. The rod is ordered separately for the Tripod Cast Iron Varnished. The tripod has a thread for the rod, so add Rods For Stand Bases to your enquiry and both items can be quoted together.
What sizes is the Tripod Cast Iron Varnished available in?
The Tripod Cast Iron Varnished is listed in two sizes by length (A): 105, weighing 1.2 kg, and 145, weighing 2.0 kg. The heavier size suits taller rods and larger loads; exact dimensions are confirmed with your quotation.
Why choose a tripod base like the Tripod Cast Iron Varnished?
A tripod base like the Tripod Cast Iron Varnished rests on three points, so it sits without rocking even on a bench that is not perfectly flat, and the space between its legs leaves room for a burner or vessel close to the rod.
Is the Tripod Cast Iron Varnished a burner tripod?
No. The Tripod Cast Iron Varnished is a stand base with a thread for a support rod, used to build retort stands. If you need a tripod that holds gauze over a burner, ask us through the contact page and we will suggest a suitable item.
How should the Tripod Cast Iron Varnished be looked after?
Keep the Tripod Cast Iron Varnished dry and wipe spills off the varnish promptly. Cast iron is strong under load but can crack if dropped on a hard floor, so lift it with both hands and store it on a low shelf.
Who manufactures the Tripod Cast Iron Varnished?
The Tripod Cast Iron Varnished is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders are handled by the manufacturer itself.
Request a Quote
Request a price for the Tripod Cast Iron Varnished, together with its rods, on our contact page or through the enquiry cart. The quotation comes straight from the manufacturer.
Last updated: 24 September 2026
Foot For Rods
Foot For Rods (Product Code: SLE/LR/04) is a round tempered cast iron foot, 80 mm in diameter, used to stand a 12 mm support rod upright for light clamping and demonstration set-ups in school, college and research laboratories. Its compact circular footprint takes very little bench space, which makes it handy for single-clamp jobs and crowded benches. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | Tempered cast iron |
| Foot diameter (D) | 80 mm |
| Rod diameter (D) | 12 mm |
| Product code | SLE/LR/04 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Foot for Rods Used For?
Not every job needs a large rectangular stand base. When a single clamp has to hold a test tube, a thermometer or a small funnel, a 12 mm rod standing in this 80 mm foot does the work while leaving the rest of the bench free. The small round footprint also fits on trays and in tight corners of a fume cupboard where a full-size base would be in the way.
Because the footprint is compact, keep loads light, low and centred over the foot; for tall or top-heavy apparatus, move up to a larger stand base. It also suits physics lab equipment set-ups in Indian schools, where a rod standing in a small foot can carry light demonstration pieces. Tempering is a heat treatment that reduces the brittleness of cast iron; keep the foot dry and wipe off spills so its surface stays clean.
What to Specify When Ordering
- The number of feet required.
- Whether you need rods to go with them; the foot takes 12 mm rods, and we will confirm matching rods in the quotation.
- Whether you prefer this tempered cast iron version or the stainless steel 18/10 foot listed separately.
- The delivery location.
OEM Manufacturer
Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of the Foot For Rods and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buying small fittings like this deal with the maker directly for pricing and repeat supply.
If you need help matching feet, rods and clamps for a new lab, ask us. More about the company is on the ScienceLab profile.
Related Stand bases, Rods and Rings
Other supports and fittings used with a rod foot:
- Foot For Rods, Stainless Steel 18/10 — the stainless steel version for wet or frequently cleaned benches.
- Rods For Stand Bases — support rods for building the stand.
- Sockets For Rods Without Thread — sockets for mounting rods without a threaded fitting.
- Table Clamp For Rods — fixes a rod to the edge of a table instead of standing it on a foot.
- Bosshead Malleable Cast Iron Chromium Plated — attaches a clamp to the rod.
View the whole Stand bases, Rods and Rings category.
Frequently Asked Questions
What rod size fits the Foot For Rods?
The Foot For Rods is designed for rods with a diameter (D) of 12 mm. Check that your support rods are 12 mm before ordering; if unsure, mention the rods you already use in your enquiry and we will confirm compatibility.
How big is the Foot For Rods?
The Foot For Rods has a diameter (D) of 80 mm, giving a compact round footprint that takes little bench space. It suits light, low set-ups; for tall or heavy apparatus, a larger stand base is the safer choice.
What is the Foot For Rods made of?
The Foot For Rods is made of tempered cast iron. Tempering is a heat treatment that reduces the brittleness of cast iron. Keep the foot dry and wipe off any chemical spills promptly so the metal surface stays in good condition.
Is there a stainless steel version of the Foot For Rods?
Yes. Besides this tempered cast iron Foot For Rods, the range includes the Foot For Rods, Stainless Steel 18/10 as a separate item, which suits wet or frequently cleaned benches. Ask us to quote both if you want to compare.
Who manufactures the Foot For Rods?
The Foot For Rods is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Pricing, repeat orders and fitting advice come straight from the manufacturer.
Can the Foot For Rods be ordered in bulk?
Yes. The Foot For Rods can be ordered in quantity for school and college labs, dealers and importers in India and international markets. Give the number of feet, any rods needed and the delivery location to receive a quotation.
Request a Quote
Ask for a Foot For Rods quotation through our contact page or add it to the enquiry cart with any rods and clamps you need. Quotations come direct from the manufacturer.
Last updated: 24 September 2026
Base Frame tube, 18/10 Stainless Steel
Base Frame tube, 18/10 Stainless Steel (Product Code: SLE/LR/05) is a tubular 18/10 stainless steel base frame used as the foot of larger laboratory support frames that carry rods, bossheads and clamps across wide apparatus. It is offered as a V-form frame with 2 legs or as an H-form frame with a variable bridge, and its external dimensions A, B and C can be defined individually. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | 18/10 stainless steel, tube |
| Version 1 | Base frame tube V: 2 legs in V form |
| Version 2 | Base frame tube H: legs in H form, bridge variable |
| Dimension A | Leg length |
| Dimensions | External dimensions A, B and C can be defined individually |
| Product code | SLE/LR/05 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Stainless Steel Base Frame Tube Used For?
Some apparatus is simply too wide or too tall for one rod on a plate base: a long distillation train, a column with several take-off points, or a row of vessels that must be clamped side by side. For these, labs build a frame, and the base frame tube is its foot. The V form spreads 2 legs apart to resist tipping in more than one direction, while the H form joins its legs with a bridge whose length can vary, giving a broad, steady base for frames that span a bench or fume cupboard.
Because the external dimensions A, B and C are defined individually, the frame can be sized to the space it must occupy. Measure the width, depth and clear height of the bench or fume cupboard, and the footprint of the apparatus, before you specify. Fitted with rods, bossheads made for frames and clamps, it forms the lab stand, clamp and boss head system that teaching and research labs in India use for their larger set-ups.
What to Specify When Ordering
- The form: V (2 legs in V form) or H (legs in H form with a variable bridge).
- The external dimensions A (leg length), B and C that you need.
- The bench or fume-cupboard space the frame has to fit.
- Rods, bossheads for frames and clamps to be quoted with it.
OEM Manufacturer
Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597) trades as ScienceLab and is the OEM (original equipment manufacturer) of these base frames. They are produced at the company's licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala, Haryana (Factory Licence AMB-ONLINE-CHD-J-414).
Because A, B and C are set for each order, you agree the dimensions directly with the manufacturer rather than through a reseller, and repeat frames can be requested to the same sizes. Research institutes, colleges, dealers and importers can read more on the ScienceLab profile.
Related Stand bases, Rods and Rings
Fittings and frames that work with a stainless base frame tube:
- Bosshead For Frames, 18/10 Stainless Steel — a bosshead intended for frames, in the same grade of steel.
- H-Frame Complete — a complete H-frame for comparison with a frame built to your sizes.
- H-Frame MINI — a smaller H-frame for compact set-ups.
- Rods For Stand Bases — support rods for the uprights of the frame.
- Stand bases 18/10 Stainless Steel — single-rod stainless bases for smaller jobs.
Explore the Stand bases, Rods and Rings category for all bases, frames and rings.
Frequently Asked Questions
What forms does the Base Frame tube, 18/10 Stainless Steel come in?
The Base Frame tube, 18/10 Stainless Steel comes in two forms: a V version with 2 legs arranged in a V, and an H version with legs in H form joined by a variable bridge. Both are made from 18/10 stainless steel tube.
Can the dimensions of the Base Frame tube, 18/10 Stainless Steel be specified?
Yes. The external dimensions A, B and C of the Base Frame tube, 18/10 Stainless Steel can be defined individually, with A being the leg length. Send the sizes you need, or the space the frame must fit, and we will confirm them in the quotation.
Why is the Base Frame tube made of 18/10 stainless steel?
The Base Frame tube, 18/10 Stainless Steel uses a grade of about 18% chromium and 10% nickel because frames often stay in place inside fume cupboards and wet areas, where untreated steel would rust. Stainless tube can also be wiped down after spills.
Which fittings are used with the Base Frame tube, 18/10 Stainless Steel?
Frames built on the Base Frame tube, 18/10 Stainless Steel are completed with rods, bossheads designed for frames and clamps. Tell us what the frame must hold, and we will suggest compatible fittings from the Stand bases, Rods and Rings range in the quotation.
Who manufactures the Base Frame tube, 18/10 Stainless Steel?
The Base Frame tube, 18/10 Stainless Steel is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Dimensions, quotations and repeat orders are agreed directly with the manufacturer.
What information is needed to quote the Base Frame tube, 18/10 Stainless Steel?
To quote the Base Frame tube, 18/10 Stainless Steel we need the form (V or H), the A, B and C dimensions or the space available, the quantity and the delivery location. A sketch or photo of your set-up helps us confirm the sizes.
Request a Quote
Send the form and dimensions you need through our contact page, or add the Base Frame tube to the enquiry cart. The quotation comes directly from the manufacturer.
Last updated: 24 September 2026
H-Frame MINI
H-Frame MINI (Product Code: SLE/LR/06) is a compact cast iron H-shaped frame base used to hold support rods upright for small retort stands and clamp set-ups in school, college and research laboratories. Teachers and technicians pick it for light bench work because it weighs only 1.2 kg and accepts rods of 8 mm and 12 mm diameter (rod not included). It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, alongside its wider range of chemistry lab equipment for India.
Specifications
| Parameter | Detail |
|---|---|
| Type | H-shaped frame base, MINI size |
| Material | Cast iron |
| Length (A, as listed) | 210 |
| Width (B, as listed) | 200 |
| Weight | 1.2 kg |
| Rod diameters accepted | 8 mm and 12 mm |
| Rod | Not included |
| Product code | SLE/LR/06 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the H-Frame MINI Used For?
An H outline spreads the frame's weight along two side bars, so a rod standing in it resists tipping sideways better than a rod in a small round foot, while the gap between the bars leaves room for a spirit lamp, beaker or small apparatus close to the rod. Typical jobs include holding a test tube, thermometer or small flask with a bosshead and clamp, hanging a light pendulum, or supporting a funnel over a receiver during filtration.
Because the MINI is light, it is meant for small loads: keep glassware low on the rod and centred over the frame, and use the 12 mm rod size when you want a stiffer column. For tall assemblies or heavy flasks, a larger and heavier frame is the safer choice. Paired with bossheads and clamps, it forms a simple retort stand for student benches in India; wipe the cast iron dry after practicals.
What to Specify When Ordering
- The rod diameter you will use with it: 8 mm or 12 mm.
- Whether you also need rods, since the H-Frame MINI is sold without one.
- The number of frames per lab or per student group.
- Whether the heavier H-Frame Complete would suit taller set-ups better.
OEM Manufacturer
Jain Scientific Equipments Private Limited trades under the name ScienceLab and is the OEM (original equipment manufacturer) of the H-Frame MINI, which it makes at its own licensed factory at Saha, Ambala, Haryana, India. Because the frame comes from the maker rather than a trading house, schools, colleges, dealers and importers receive quotations straight from the manufacturer.
Ask us about matching rods, spare fittings or repeat orders for the same frame. Company background is on the ScienceLab company profile.
Related Stand Bases, Rods and Rings
Items that complete or replace the H-Frame MINI in a stand set-up:
- Rods For Stand Bases — unthreaded 18/10 stainless rods, needed because the MINI ships without a rod.
- H-Frame Complete — the larger cast iron frame that comes with bossheads and aluminium rods.
- Stand With Base Plate H-Shape — a heavier H-shape base with a long stainless rod for tall set-ups.
- Table Clamp For Rods — fixes a rod to the bench edge when bench space is short.
See every base, rod and ring in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What rod sizes fit the H-Frame MINI?
The H-Frame MINI accepts support rods of 8 mm and 12 mm diameter. Choose 8 mm for light fittings and 12 mm when you want a stiffer column, and tell us which diameter you plan to use so the quotation can list matching rods.
Does the H-Frame MINI come with a rod?
No. The H-Frame MINI is sold as the cast iron frame base only, and the rod is not included. Rods can be added to the same order from the Rods For Stand Bases listing or quoted separately on request.
How heavy and how large is the H-Frame MINI?
The H-Frame MINI weighs 1.2 kg, and its listed dimensions are A (length) 210 and B (width) 200. The low weight makes it easy to move between benches, but it suits light, low loads rather than tall assemblies.
Who manufactures the H-Frame MINI?
The H-Frame MINI is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Buyers deal directly with the maker for quotations, spare parts and repeat orders.
Is the H-Frame MINI available for school bulk orders and export?
Yes. ScienceLab supplies the H-Frame MINI in quantity to schools, colleges and dealers in India and to buyers in international markets. Share the number of frames and rods needed and the delivery location through our contact page.
What information does a quotation for the H-Frame MINI need?
For an H-Frame MINI quotation, tell us the quantity, the rod diameter you will use (8 mm or 12 mm), whether rods should be included and the delivery address. With those details the manufacturer can price the order accurately.
Request a Quote
To order the H-Frame MINI, send your requirement through the contact page or add it to the enquiry cart. Quotes come direct from the manufacturer in Ambala.
Last updated: 24 September 2026
Sockets For Rods Without Thread
Sockets For Rods Without Thread (Product Code: SLE/LR/07) are socket fittings used to seat plain, unthreaded support rods so they stay firmly in place in laboratory stand and frame set-ups in schools, colleges and research labs. Lab technicians can order them in either of two materials, green-coated steel or 18/10 stainless steel, to suit the working conditions. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its lab equipment range from Ambala.
Key Details
| Parameter | Detail |
|---|---|
| Type | Socket for rods without thread (unthreaded rods) |
| Material option 1 | Steel, green coated |
| Material option 2 | 18/10 stainless steel |
| Product code | SLE/LR/07 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Sockets for Rods Without Thread Used For?
A plain rod has no thread to screw into a base, so it needs a socket to give it a fixed seat. With a socket in place, a technician can stand a support rod up for a practical, hang bossheads and clamps on it, and lift it out again afterwards so the bench is clear for the next class. This makes unthreaded rods quick to set up and swap between experiments.
Pick the green-coated steel version for general teaching rooms, where a coated finish is enough and the colour makes the fitting easy to spot. Choose 18/10 stainless steel, an alloy of about 18% chromium and 10% nickel, for wet areas, water-bath work or benches that are cleaned often, where a coating could wear. For a retort stand lab in India that mixes both, many buyers keep stainless sockets near sinks and coated ones elsewhere.
What to Specify When Ordering
- The material: green-coated steel or 18/10 stainless steel.
- The diameter of the rods you will use, so we can confirm the socket suits them.
- The number of sockets required.
- Whether matching unthreaded rods should be quoted with them.
OEM Manufacturer
These sockets are produced by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, acting as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Small fittings like this are bought factory-direct by schools, colleges, laboratory dealers and importers, with no trading middleman in between.
If you are replacing worn sockets or adding more to an existing set, ask us and the manufacturer will quote for the same pattern. Read more on the ScienceLab profile page.
Related Stand Bases, Rods and Rings
Rods and supports that are used together with rod sockets:
- Rods For Stand Bases — unthreaded 18/10 stainless rods in several lengths.
- Stand bases 18/10 Stainless Steel — a free-standing base when no fixed socket position is available.
- Foot For Rods, Stainless Steel 18/10 — a stainless foot with anti-slip rubber for a single rod.
- Table Clamp For Rods — holds a rod at the edge of a bench top.
Browse the full Stand Bases, Rods and Rings range.
Frequently Asked Questions
What materials are the Sockets For Rods Without Thread made in?
Sockets For Rods Without Thread are available in two materials: green-coated steel and 18/10 stainless steel. Both do the same job of seating an unthreaded rod; the choice depends on how wet or heavily cleaned the working area is.
Which rod diameter do these sockets take?
The rod diameter for the Sockets For Rods Without Thread is not stated in our listing. Tell us the diameter of the rods you use through the contact page, and the manufacturer will confirm a matching socket before you order.
Should I choose coated steel or stainless steel sockets?
Choose the 18/10 stainless steel Sockets For Rods Without Thread for wet areas, water baths or frequent cleaning. The green-coated steel version suits dry, general teaching benches and is easy to identify by its colour.
Who manufactures the Sockets For Rods Without Thread?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Sockets For Rods Without Thread as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, replacements and repeat orders are handled by the manufacturer itself.
Can the sockets be ordered together with rods?
Yes. Sockets For Rods Without Thread can be quoted together with unthreaded rods from our Rods For Stand Bases range. Tell us the rod length and diameter you want so both items appear on one quotation.
What does a quotation for these sockets need?
A quotation for Sockets For Rods Without Thread needs the material (green-coated steel or 18/10 stainless steel), the quantity, the rod diameter they must fit and the delivery location in India or abroad.
Request a Quote
Ask for a price on the contact page or place the item in the enquiry cart; your quotation comes directly from the manufacturer.
Last updated: 24 September 2026
Table Clamp For Rods
Table Clamp For Rods (Product Code: SLE/LR/08) is a tempered cast iron clamp used to fix a support rod directly to the edge of a laboratory bench or table instead of standing it in a base. It fits table tops up to a maximum thickness of 55 mm and is listed for rods of D/Ø 12/13, so it frees bench space in school, college and research labs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a space-saving piece of chemistry lab equipment for India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Table (bench-edge) clamp for support rods |
| Material | Tempered cast iron |
| Table top thickness | Up to 55 mm maximum |
| Rod size (D/Ø, as listed) | 12/13 |
| Product code | SLE/LR/08 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Table Clamp for Rods Used For?
Clamping a rod to the table borrows the weight of the whole bench, so a tall rod stays steady even when a base would start to tip. That suits long set-ups such as distillation columns, pendulums and demonstration apparatus that must hang well above the work surface. It also keeps the bench area under the rod completely free, which helps on narrow student benches where a stand base would take up room.
Before ordering, measure your table top: the clamp takes edges up to 55 mm thick. Place a thin pad between the jaws and a delicate or laminated surface, tighten firmly without forcing, and check the rod is vertical before loading glassware. Tempered cast iron is heat-treated to reduce the brittleness of ordinary cast iron, so it tolerates regular tightening in a busy chemistry lab.
What to Specify When Ordering
- The thickness of your bench or table top (the clamp takes up to 55 mm).
- The rod diameter you use; the clamp is listed for D/Ø 12/13.
- The number of clamps per lab.
- Whether matching rods should be quoted with them.
OEM Manufacturer
ScienceLab is the brand of Jain Scientific Equipments Private Limited, which makes the Table Clamp For Rods as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Institutions and dealers ordering bench fittings get them direct from the factory, not through a reseller.
For replacement clamps or to extend an existing lab, ask us for a quotation from the manufacturer. Company information is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Pieces that work with a table clamp in the same set-up:
- Rods For Stand Bases — unthreaded 18/10 stainless rods, listed in 12 and 13 D/Ø sizes.
- Universal Clamp — for gripping flasks and tubes once the rod is fixed.
- Stand Bases Steel Varnished — a free-standing base for tables whose edge cannot be clamped.
- Sockets For Rods Without Thread — another way to give an unthreaded rod a fixed seat.
More options are in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
How thick a table top will the Table Clamp For Rods fit?
The Table Clamp For Rods fits table and bench tops up to a maximum thickness of 55 mm. Measure the edge where you plan to fix it; thicker tops need a stand base or another mounting method instead.
Which rod size does the Table Clamp For Rods take?
The Table Clamp For Rods is listed for rods of D/Ø 12/13, the same sizes offered in our Rods For Stand Bases range. Tell us the rod you already use and the manufacturer will confirm the fit before you order.
What is the Table Clamp For Rods made of?
The Table Clamp For Rods is made of tempered cast iron. Tempering is a heat treatment that makes cast iron less brittle, which helps a clamp that is tightened and released many times during practical classes.
When is a table clamp better than a stand base?
A Table Clamp For Rods is the better choice for tall or top-heavy set-ups and for narrow benches, because the table carries the load and no floor area of the bench is used. For movable set-ups, a stand base is easier.
Who manufactures the Table Clamp For Rods?
The Table Clamp For Rods is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is sold factory-direct to institutions and dealers.
Can the Table Clamp For Rods be ordered in bulk or for export?
Yes. The Table Clamp For Rods is supplied in quantity to schools, colleges and dealers across India and international markets. Send the quantity, table thickness and rod size through the contact page for a quotation.
Request a Quote
Request pricing through our contact form or add the Table Clamp For Rods to the enquiry cart. The quote is prepared by the manufacturer itself.
Last updated: 24 September 2026
H-Frame Complete
H-Frame Complete (Product Code: SLE/LR/09) is a cast iron H-frame support set used to build a large, rigid framework for holding and hanging apparatus above the bench in physics, chemistry and engineering teaching labs. It comes with bossheads and 12 mm diameter aluminium rods, and its listed size is 500 × 250 × 800 (length × width × height) at 6.5 kg. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as lab equipment for colleges and schools in India.
Specifications
| Parameter | Detail |
|---|---|
| Type | H-frame support, complete set |
| Frame material | Cast iron |
| Rods | Aluminium, 12 mm diameter (included) |
| Bossheads | Included |
| Length (as listed) | 500 |
| Width (as listed) | 250 |
| Height (as listed) | 800 |
| Weight | 6.5 kg |
| Product code | SLE/LR/09 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the H-Frame Complete Used For?
Rods set into the cast iron frame and joined with the supplied bossheads create a framework with several fixing points, so one set-up can carry clamps, pulleys, springs or a pendulum at different heights. Physics teachers use such frames for mechanics work like Hooke's law, simple pendulum and pulley experiments, while chemistry and engineering labs use them to support long glass apparatus that a single rod cannot hold steadily.
The listed 800 height leaves room for long pendulum strings and tall assemblies, and the 6.5 kg cast iron base keeps the frame planted. Aluminium rods are light and do not rust, so the frame is easy to put up and take down between classes. Stand the frame on a level bench, tighten every bosshead before loading, and keep the heaviest pieces low.
What to Specify When Ordering
- The number of complete frames needed for your lab or classes.
- Whether you want extra bossheads or rods for more fixing points.
- Whether some benches would be better served by the smaller H-Frame MINI.
- The delivery location, in India or abroad.
OEM Manufacturer
Jain Scientific Equipments Private Limited, known to customers as ScienceLab, is the OEM (original equipment manufacturer) of the H-Frame Complete and produces it at its own licensed factory at Saha, Ambala, Haryana, India. The company is a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714), and its export consignments move under Importer-Exporter Code AAECJ8618A (DGFT).
Because the frame, rods and bossheads come from one maker, ask us when you need spare bossheads or replacement rods for this set. More about the company is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Items that extend or complement an H-frame set-up:
- Bosshead For Frames, 18/10 Stainless Steel — extra bossheads for adding fixing points to a frame.
- Rods For Stand Bases — additional unthreaded stainless rods, including 12 diameter sizes.
- H-Frame MINI — a compact 1.2 kg cast iron frame for lighter bench work.
- Stand With Base Plate H-Shape — a heavy single-rod stand when a full frame is not needed.
See all items in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What is included with the H-Frame Complete?
The H-Frame Complete includes the cast iron frame, bossheads and aluminium rods of 12 mm diameter, so it can be assembled without buying extra fittings. For the exact number of rods and bossheads in the set, ask us through the contact page.
What are the size and weight of the H-Frame Complete?
The H-Frame Complete is listed at length 500, width 250 and height 800, with a weight of 6.5 kg. The cast iron gives the frame a low, heavy footing that keeps tall set-ups steady on the bench.
Why does the H-Frame Complete use aluminium rods?
The H-Frame Complete uses 12 mm aluminium rods because aluminium is light and does not rust. That makes the frame easier to assemble, carry and store, while the heavy cast iron base provides the stability.
How is the H-Frame Complete different from the H-Frame MINI?
The H-Frame Complete is the larger 6.5 kg set that comes with bossheads and aluminium rods. The H-Frame MINI is a 1.2 kg frame base for 8 or 12 mm rods and is sold without a rod, for lighter work.
Who manufactures the H-Frame Complete?
The H-Frame Complete is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, spare bossheads and repeat orders come from the manufacturer directly.
Can the H-Frame Complete be ordered for export?
Yes. The H-Frame Complete is shipped to institutions and dealers in India and international markets. Give us the quantity, destination and any extra fittings you need, and the manufacturer will prepare an export quotation.
Request a Quote
Send your H-Frame Complete requirement via the contact page or the enquiry cart, and receive a quotation direct from the manufacturer.
Last updated: 24 September 2026
Burette Stand
Burette Stand (Product Code: SLE/LR/10) is a cast iron titration stand used to hold a burette upright above a flask during volumetric analysis in school, college and research chemistry labs. It includes two 105 mm diameter plates, one black and one white, and an 18/10 stainless steel rod of 600 × 10 mm on which a burette holder is fitted. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, making it a burette stand for Indian labs that comes straight from the maker.
Specifications
| Parameter | Detail |
|---|---|
| Type | Burette (titration) stand |
| Material | Cast iron |
| Plates (D/Ø) | 2 × 105 mm, one black and one white (included) |
| Rod | 18/10 stainless steel, 600 × 10 mm (included) |
| Use with | A burette holder (not listed among the included parts) |
| Product code | SLE/LR/10 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Burette Stand Used For?
In a titration, the burette is clamped to the rod and the conical flask sits on one of the plates directly under the tip. The white plate makes an indicator colour change easy to spot at the end point, which is why most acid-base titrations are run over white. The black plate gives contrast when the solution is pale, cloudy or forms a light precipitate, so students can switch backgrounds without moving the stand.
Check that the burette hangs vertically before filling it, and read the meniscus at eye level. The 18/10 stainless steel rod stands up to splashes of dilute acids and alkalis better than plain steel; rinse and dry the rod and plates after each session. One stand per titration station is the usual arrangement in chemistry lab equipment set-ups for India's school and college practicals.
What to Specify When Ordering
- The number of stands, usually one per titration station.
- Whether single or double burette holders should be quoted with the stands.
- Whether glass burettes and conical flasks are also needed.
OEM Manufacturer
This Burette Stand is produced by Jain Scientific Equipments Private Limited, which does business as ScienceLab, in the role of OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Chemistry departments, schools and dealers who equip titration benches buy it factory-direct instead of through a trader.
Lost a plate or need a replacement rod? Ask us and the manufacturer will advise. Company details are on the ScienceLab profile.
Related Stand Bases, Rods and Rings
What else a titration station needs:
- Burette Clamp, Die Cast – Single Clamp — a holder for one burette on a stand rod.
- Burette — the graduated glass tube that delivers the titrant.
- Conical Flask — the flask that stands on the plate to receive the titrant.
- Burette Stand, Hard Wood, Double — a hardwood stand for running two burettes side by side.
Other supports are listed under Stand Bases, Rods and Rings.
Frequently Asked Questions
What comes with the Burette Stand?
The Burette Stand comes with its cast iron base, two 105 mm diameter plates (one black, one white) and an 18/10 stainless steel rod measuring 600 × 10 mm. A burette holder is fitted to the rod and is not listed among the included parts.
Why does the Burette Stand have a black and a white plate?
The Burette Stand has two plates so the flask can sit on the background that best shows the end point. White suits most coloured indicator changes, and black shows up pale, cloudy or light-coloured precipitates more clearly.
Is a burette holder included with the Burette Stand?
A burette holder is not listed among the Burette Stand's included parts; the stand is designed for one to be fitted on its rod. We can quote a single or double burette clamp with the stand if you ask.
What is the rod of the Burette Stand made of?
The Burette Stand rod is 18/10 stainless steel, 600 mm long and 10 mm in diameter. Stainless steel resists rust and splashes from dilute titration reagents, which keeps the rod clean and smooth for adjusting the burette holder.
Who manufactures the Burette Stand?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Burette Stand as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Orders, replacement plates or rods and repeat supplies are handled by the manufacturer.
What should a Burette Stand enquiry include?
A Burette Stand enquiry should give the number of stands, whether burette holders, burettes or flasks are needed, and the delivery location in India or abroad. Send it through the contact page for a quotation.
Request a Quote
For pricing, contact us through the contact page or add the Burette Stand to the enquiry cart. Your quote is issued directly by the manufacturer.
Last updated: 24 September 2026
Foot For Rods, Stainless Steel 18/10
Foot For Rods, Stainless Steel 18/10 (Product Code: SLE/LR/11) is a stainless steel rod foot used to stand a single support rod upright on the bench in labs where corrosion resistance and easy cleaning matter. Its anti-slip rubber protection grips smooth work surfaces and helps spare the bench finish, which suits tiled, glass and epoxy tops in chemistry, biology and research labs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for teaching and research labs across India.
Key Details
| Parameter | Detail |
|---|---|
| Type | Foot for support rods |
| Material | 18/10 stainless steel |
| Base protection | Anti-slip rubber |
| Product code | SLE/LR/11 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Stainless Steel Foot for Rods Used For?
This foot is meant for benches that get wet or are cleaned often: beside sinks, around water baths, in microbiology rooms wiped down with disinfectant, or in any area where a painted or cast iron base would start to mark or rust. Stand a rod in it, add a bosshead and a clamp, and it will hold a thermometer, a small separating funnel or a test tube for the duration of a practical.
The rubber underside stops the foot from sliding when a clamp is tightened and prevents metal-on-surface scratches. Keep oils and strong solvents off the rubber, which can soften it, and never stand the foot on a hot plate. As with any single foot, keep loads light and centred; for heavy work choose a full stand base. It pairs well with other stainless laboratory instruments in India's teaching labs.
What to Specify When Ordering
- The number of feet required.
- The diameter of the rods you will use, so we can confirm the fit.
- Whether stainless rods should be quoted with the feet.
- Whether some positions could use the tempered cast iron Foot For Rods instead.
OEM Manufacturer
ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM (original equipment manufacturer) of this stainless rod foot and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Laboratories, schools and distributors order it straight from the factory, so pricing and supply are agreed with the maker.
If the rubber protection wears or you want more feet in the same finish, ask us. Background on the company is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Stainless fittings and alternatives for the same set-up:
- Rods For Stand Bases — 18/10 stainless rods to stand in the foot.
- Bossheads 18/10 Stainless Steel — stainless bossheads to fix clamps on the rod.
- Retort Clamp Standard 18/10 Stainless Steel — a stainless clamp for holding glassware.
- Foot For Rods — the tempered cast iron version for general benches.
The full range is in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What is the Foot For Rods, Stainless Steel 18/10 made of?
The Foot For Rods, Stainless Steel 18/10 is made of 18/10 stainless steel, an alloy with about 18% chromium and 10% nickel, and has anti-slip rubber protection underneath. The steel resists rust and the rubber keeps the foot from sliding.
What does the anti-slip rubber protection do?
The anti-slip rubber on the Foot For Rods, Stainless Steel 18/10 grips smooth bench tops so the foot stays put while clamps are tightened, and it keeps bare metal from scratching tiles, glass or epoxy surfaces.
Which rod diameter fits the stainless steel foot?
The rod diameter for the Foot For Rods, Stainless Steel 18/10 is not given in our listing. Tell us which rods you use through the contact page and the manufacturer will confirm a matching foot and rod.
Should I choose the stainless steel or the cast iron foot?
Choose the Foot For Rods, Stainless Steel 18/10 for wet, frequently cleaned or hygiene-sensitive benches. The tempered cast iron Foot For Rods is the simpler option for dry, general teaching benches.
Who manufactures the Foot For Rods, Stainless Steel 18/10?
The Foot For Rods, Stainless Steel 18/10 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is sold direct to institutions and dealers.
How should the stainless steel foot be cleaned?
Wipe the Foot For Rods, Stainless Steel 18/10 with water or a mild detergent and dry it after use. Keep oils and strong solvents away from the rubber protection, and do not place the foot on hot surfaces.
Request a Quote
Ask for a quotation through the contact page or put this foot in the enquiry cart. Prices come from the manufacturer directly.
Last updated: 24 September 2026
Stand With Base Plate H-Shape
Stand With Base Plate H-Shape (Product Code: SLE/LR/12) is a heavy laboratory stand with an H-shaped cast iron base plate, used to carry tall or heavy apparatus such as distillation columns, reflux condensers and large flasks in college, university and research labs. It weighs 8.5 kg, is listed at 420 × 400 × 1000 (length × width × height), and includes one 18/10 stainless steel rod of 1000 × 16 mm with a washer and nut. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for distillation apparatus set-ups in Indian labs.
Specifications
| Parameter | Detail |
|---|---|
| Type | Stand with H-shaped base plate |
| Base material | Cast iron |
| Length (as listed) | 420 |
| Width (as listed) | 400 |
| Height (as listed) | 1000 |
| Weight | 8.5 kg |
| Rod | 1 × 18/10 stainless steel, 1000 × 16 mm (included) |
| Fixings | Washer and nut (included) |
| Product code | SLE/LR/12 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the H-Shape Base Plate Stand Used For?
A 1000 mm rod needs a wide, heavy footing, and that is what the 420 × 400 H-shaped plate and its 8.5 kg of cast iron provide. The stand is chosen for work that would topple a small base: fractional distillation with a long column, Soxhlet extraction, reflux under a condenser, or several clamps stacked up one rod. The 16 mm stainless rod is thick enough to resist bending when those clamps carry glassware well above the bench.
Fix the rod firmly with the included washer and nut before loading, then keep the heaviest vessel low and above the plate. The open centre of the H leaves room to place a heating mantle, burner or lab jack under the flask. Wipe the rod and plate after work; stainless steel resists rust but spilled reagents should not be left to dry on the cast iron.
What to Specify When Ordering
- The number of stands needed.
- Bossheads and clamps suited to a 16 mm rod, if you need them.
- Any spare or longer rods for the same stand.
- The delivery location, in India or abroad.
OEM Manufacturer
Jain Scientific Equipments Private Limited, whose brand is ScienceLab, builds the Stand With Base Plate H-Shape as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Universities, schools, dealers and importers receive it factory-direct, with quotations prepared by the manufacturer rather than a trader.
Ask us about replacement rods, washers or nuts for stands already in use. Company information is available on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Fittings and alternatives for heavy stand work:
- Bosshead Cross Type 18/10 Stainless Steel — joins clamps or cross rods to the upright.
- Retort Clamp Special 3-Prongs, 18/10-Stainless Steel — grips flasks and columns on the stand.
- Rods For Stand Bases — stainless rods, including 16 diameter rods in several lengths.
- H-Frame Complete — a cast iron frame set with rods and bossheads for multi-point work.
- A-Shape Retort Stand Base — another base shape for retort stands.
See the whole Stand Bases, Rods and Rings category.
Frequently Asked Questions
What is included with the Stand With Base Plate H-Shape?
The Stand With Base Plate H-Shape includes the cast iron H-shaped base plate, one 18/10 stainless steel rod measuring 1000 × 16 mm, and a washer and nut. Bossheads and clamps are ordered separately to suit your apparatus.
How heavy and how large is the Stand With Base Plate H-Shape?
The Stand With Base Plate H-Shape weighs 8.5 kg and is listed at 420 length, 400 width and 1000 height. The broad, heavy plate is what lets it carry tall glass assemblies without tipping.
Which bossheads and clamps suit the 16 mm rod?
The Stand With Base Plate H-Shape uses a 16 mm diameter rod, so choose bossheads whose opening takes 16 mm. Tell us the clamps you plan to use through the contact page and we will confirm the fit.
What kind of work is the H-shape base plate stand best for?
The Stand With Base Plate H-Shape suits tall, heavy set-ups such as fractional distillation, Soxhlet extraction and reflux, or several clamps on one rod. For small test-tube work, a lighter base or foot is more practical.
Who manufactures the Stand With Base Plate H-Shape?
The Stand With Base Plate H-Shape is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Spares and repeat orders are handled by the manufacturer.
What should a quotation request for this stand include?
A quotation request for the Stand With Base Plate H-Shape should give the quantity, any bossheads, clamps or extra rods needed, and the delivery location. Institutions in India and international markets can order in bulk.
Request a Quote
Use the contact page or the enquiry cart to request a price. The quotation is sent by the manufacturer itself.
Last updated: 24 September 2026
Tripods
Tripods (Product Code: SLE/LR/13) are three-legged laboratory tripods used to hold a wire gauze, pipeclay triangle or vessel above a Bunsen burner for heating in school, college and research labs. Two constructions are offered, 18/10 stainless steel with welded feet and zinc-coated tempered cast iron with screwed feet, each in four sizes from D/Ø 100 to 160. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as everyday laboratory instruments for India's teaching labs.
Specifications
| Parameter | Detail |
|---|---|
| Type | Three-legged laboratory tripod |
| Stainless version | 18/10 stainless steel, welded feet |
| Cast iron version | Tempered cast iron, zinc-coated (zincked), screwed feet |
| 18/10 stainless sizes (A length × D/Ø, as listed) | 180 × 100; 210 × 120; 210 × 140; 240 × 160 |
| Tempered cast iron sizes (A length × D/Ø, as listed) | 180 × 100; 210 × 120; 210 × 140; 240 × 150 |
| Product code | SLE/LR/13 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Laboratory Tripods Used For?
A tripod is the classic heating support: the burner goes underneath, a wire gauze or pipeclay triangle rests on the ring, and a beaker, evaporating dish or crucible sits on top. Students use it to boil water, evaporate solutions to crystals, heat crucibles to constant mass and run simple calorimetry. The A dimension (listed as length) and the D/Ø value let you match the tripod to the height of your burner flame and the size of the vessel.
Choose stainless steel with welded feet where hygiene, corrosion and easy cleaning matter, and zinc-coated tempered cast iron with screwed feet for robust everyday class use. Let a tripod cool before moving it, keep it on a heat-resistant mat, and never place a vessel directly over a bare flame without a gauze when the glass needs even heating.
What to Specify When Ordering
- The material: 18/10 stainless steel (welded feet) or tempered cast iron (screwed feet).
- The size by A and D/Ø from the lists above.
- The quantity, usually one per heating station.
- Whether gauzes, pipeclay triangles or burners should be quoted too.
OEM Manufacturer
Jain Scientific Equipments Private Limited trades as ScienceLab and makes these Tripods as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. For vendor registration on tenders, the company's details are GSTIN 06AAECJ8618A1ZT and Legal Entity Identifier 3358004HRD1JIVXKYX49.
Schools, colleges, dealers and importers buy the tripods factory-direct; ask us for repeat orders in a matching size. More on the company is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
What goes on, under and beside a heating tripod:
- Gauze Wire — rests on the tripod ring to spread the flame under glassware.
- Pipeclay Triangle — holds a crucible on the tripod for strong heating.
- Bunsen Burner — the heat source placed between the legs.
- Crucible with lid — heated on the triangle for ignition and constant-mass work.
- Tripod Cast Iron Varnished — a threaded tripod stand base for a support rod, a different job.
Browse the Stand Bases, Rods and Rings category or the Burners category.
Frequently Asked Questions
What materials are the ScienceLab Tripods made in?
The Tripods are made in two versions: 18/10 stainless steel with welded feet, and tempered cast iron with a zinc coating and screwed feet. Both hold a gauze or triangle over a burner; stainless is easier to keep clean.
What sizes do the Tripods come in?
The stainless Tripods are listed as 180 × 100, 210 × 120, 210 × 140 and 240 × 160 (A × D/Ø). The cast iron Tripods are 180 × 100, 210 × 120, 210 × 140 and 240 × 150.
What is the difference between welded and screwed feet?
On the stainless steel Tripods the feet are welded, giving permanent joints with no threads to loosen. On the cast iron Tripods the feet are screwed in, so a leg that works loose can simply be tightened again.
What else do I need to heat with a tripod?
To heat with these Tripods you need a burner underneath and a wire gauze for beakers or flasks, or a pipeclay triangle for crucibles. We can quote gauzes, triangles and burners together with the tripods.
Who manufactures the Tripods?
The Tripods are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Institutions and dealers buy directly from the manufacturer.
How are these Tripods different from the Tripod Cast Iron Varnished?
These Tripods are heating supports that carry a gauze or triangle over a burner. The Tripod Cast Iron Varnished is a stand base with a thread that takes a support rod for clamps, so it serves a different purpose.
Request a Quote
Tell us the material, size and quantity through the contact page or add Tripods to the enquiry cart; quotations come direct from the manufacturer.
Last updated: 24 September 2026
Rods For Stand Bases
Rods For Stand Bases (Product Code: SLE/LR/14) are unthreaded 18/10 stainless steel support rods used to build retort stands and clamp set-ups on bases, feet, frames and table clamps in school, college and research laboratories. They are listed in lengths from 500 to 1500 and in three diameters, D/Ø 12, 13 and 16, giving fifteen size combinations to match the fitting and the height of the apparatus. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and serve as new or spare rods for labs across India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Support rods for stand bases, without thread |
| Material | 18/10 stainless steel |
| D/Ø 12 — lengths (A, as listed) | 500, 600, 750, 1000, 1250, 1500 |
| D/Ø 13 — lengths (A, as listed) | 500, 600, 750, 1000, 1250, 1500 |
| D/Ø 16 — lengths (A, as listed) | 1000, 1250, 1500 |
| Product code | SLE/LR/14 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Are Rods for Stand Bases Used For?
The rod is the backbone of every retort stand: bossheads slide onto it and carry clamps, rings and holders at whatever height the experiment needs. Because these rods have no thread, they are made for fittings that grip or seat a plain rod, such as rod sockets, table clamps and frames, and they can be moved between set-ups without screwing or unscrewing anything.
Short rods (500 or 600) keep test-tube and titration work compact, while the 1000 to 1500 lengths give room for distillation columns, long condensers and pendulums. Pick 12 or 13 for general teaching work and 16 when several heavy clamps will share one rod. Stainless steel stays smooth and rust-free, so bossheads grip evenly; wipe off spills and avoid bending a rod by overloading its top end.
What to Specify When Ordering
- The diameter, D/Ø 12, 13 or 16, matched to your base, socket or clamp.
- The length from the listed options for that diameter.
- The quantity of each size.
- The base or fitting the rods will be used with, so we can check the fit.
OEM Manufacturer
These rods are made by Jain Scientific Equipments Private Limited, the company that trades as ScienceLab, which is the OEM (original equipment manufacturer) and produces them at its own licensed factory at Saha, Ambala, Haryana, India. Labs topping up their stock, dealers and importers order the exact lengths and diameters they need direct from the factory.
Mixed orders across several sizes are common, so just list what you need and ask us. See the ScienceLab profile for company details.
Related Stand Bases, Rods and Rings
Fittings that take these rods and parts that go on them:
- Table Clamp For Rods — fixes a D/Ø 12/13 rod to a bench edge.
- Sockets For Rods Without Thread — a fixed seat for an unthreaded rod.
- H-Frame MINI — a small cast iron frame for 8 and 12 mm rods, sold without a rod.
- Bossheads 18/10 Stainless Steel — stainless bossheads to mount clamps on the rod.
All bases and supports are in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What sizes are the Rods For Stand Bases available in?
Rods For Stand Bases come in D/Ø 12 and 13 with lengths of 500, 600, 750, 1000, 1250 and 1500, and in D/Ø 16 with lengths of 1000, 1250 and 1500. That makes fifteen listed sizes in all.
Are the Rods For Stand Bases threaded?
No. Rods For Stand Bases are made without a thread, for sockets, clamps and frames that hold a plain rod. If your base needs a screw-in rod, tell us through the contact page before ordering.
Which rod diameter should I choose?
For Rods For Stand Bases, match the diameter to the base or clamp you already use. D/Ø 12 and 13 suit general teaching set-ups, while 16 is the stiffer choice for long rods carrying several heavy clamps.
What material are the Rods For Stand Bases made from?
Rods For Stand Bases are made from 18/10 stainless steel. It does not rust in normal lab use and keeps a smooth surface, so bossheads can be moved and tightened evenly along the full length of the rod.
Who manufactures the Rods For Stand Bases?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Rods For Stand Bases as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and supplies them factory-direct in India and international markets.
What should I include in a quotation request for rods?
A quotation request for Rods For Stand Bases should list each diameter and length with its quantity, the base or clamp the rods will go into, and the delivery location. The manufacturer will then confirm prices and fit.
Request a Quote
Send your size list through the contact page or the enquiry cart for a quotation straight from the manufacturer.
Last updated: 24 September 2026
Stabilizing Ring for Erlenmeyers
Stabilizing Ring for Erlenmeyers (Product Code: SLE/LR/15) is a weighted ring used to keep Erlenmeyer (conical) flasks and similar flasks from floating or tipping when they stand in a water bath or other thermal bath. It is listed in three sizes, D/Ø 50, 70 and 100, weighing 207 g, 340 g and 470 g, with a PVC covering over the metal. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for research and teaching labs in India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Weighted stabilizing ring for flasks |
| Suitable for | Erlenmeyer flasks, other flasks and similar vessels |
| Material | PVC-covered steel (the size table lists 18/10 stainless; please confirm when ordering) |
| D/Ø 50 | 207 g |
| D/Ø 70 | 340 g |
| D/Ø 100 | 470 g |
| Application | The ring's weight prevents flasks from floating in a thermal bath |
| Product code | SLE/LR/15 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Stabilizing Ring for Erlenmeyers Used For?
A flask that is only partly full is lighter than the water it displaces, so in a bath it lifts, leans and can tip over, spoiling the sample or letting bath water in. Placing a stabilizing ring on the flask adds enough weight to keep it upright and seated. This is routine when warming culture media, running temperature-controlled reactions, incubating enzyme or microbiology samples, or holding several flasks side by side in one bath.
Match the ring to the flask: the 50 size at 207 g suits small flasks, while the 100 size at 470 g gives the most hold-down force for larger ones. The PVC covering cushions the glass and keeps metal from knocking against it. Fit the ring before the bath is filled or heated, and rinse and dry it after use so no bath water is left trapped under the covering.
What to Specify When Ordering
- The size: D/Ø 50, 70 or 100.
- The flask sizes you will use, so we can suggest the matching ring.
- The number of rings per bath.
- Confirmation of the material you require (PVC-covered steel or stainless).
OEM Manufacturer
Jain Scientific Equipments Private Limited operates as ScienceLab and is the OEM (original equipment manufacturer) of the Stabilizing Ring for Erlenmeyers, produced at its own licensed factory at Saha, Ambala, Haryana, India. Research groups, schools, dealers and importers order the rings direct from the factory rather than through an agent.
To add rings in another size or replace worn ones, ask us. Company details are on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Equipment used together with flask stabilizing rings:
- Water Bath — the thermal bath in which the weighted flasks stand.
- Conical Flask — the Erlenmeyer flask the ring holds down.
- Flask, Conical, Wide Neck — a wide-neck conical flask for bath work.
- Water Bath Kit for Hotplates — turns a hot plate into a simple bath.
Other rings and supports are in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What does the Stabilizing Ring for Erlenmeyers do?
The Stabilizing Ring for Erlenmeyers adds weight to a flask standing in a thermal bath, so the flask does not float, lean or tip over. It keeps samples upright and stops bath water from getting into the flask.
What sizes and weights are available?
The Stabilizing Ring for Erlenmeyers is listed in three sizes: D/Ø 50 weighing 207 g, D/Ø 70 weighing 340 g, and D/Ø 100 weighing 470 g. Heavier rings give more hold-down force for larger flasks.
Which flasks can the stabilizing ring be used with?
The Stabilizing Ring for Erlenmeyers is suitable for Erlenmeyer flasks, other flasks and similar vessels. Tell us your flask sizes through the contact page and we will suggest the ring size that fits.
What is the Stabilizing Ring for Erlenmeyers made of?
The Stabilizing Ring for Erlenmeyers is described as PVC-covered steel, while its size table lists 18/10 stainless. Please confirm the material you need when you enquire, and we will state it clearly on the quotation.
Who manufactures the Stabilizing Ring for Erlenmeyers?
The Stabilizing Ring for Erlenmeyers is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Orders and repeat supplies are handled by the manufacturer.
Can the rings be used in very hot baths?
The Stabilizing Ring for Erlenmeyers is intended for flasks in thermal baths. Because it has a PVC covering, ask us before using it at high bath temperatures so we can confirm it suits your working conditions.
Request a Quote
For a price, write to us on the contact page or add the ring to the enquiry cart. Quotations come direct from the manufacturer.
Last updated: 24 September 2026
Crucible Retort Ring
Crucible Retort Ring (Product Code: SLE/LR/16) is a three-point crucible clamp used to hold a crucible securely over a gas flame while substances are heated or ignited in chemistry and materials labs. Its 18/10 stainless steel ring carries three adjustable ceramic Degussit clamping rods, rated to max. 2030 °C, that grip crucibles from 0 to 70 mm, including platinum crucibles. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a chemistry lab instruments supplier to schools, colleges and research labs.
Specifications
| Parameter | Detail |
|---|---|
| Type | 3-point clamp ring for crucibles |
| Design | Ring with 3 guide sleeves pointing to the centre; the clamping rods inside the sleeves can be screwed in and out |
| Crucible size range | 0–70 mm, set by hand |
| Suitable crucibles | Standard crucibles, also platinum crucibles |
| Ring material | 18/10 stainless steel |
| Clamping rods | Ceramic, Degussit (max. 2030 °C) |
| Mounting | On support stands or tripods |
| Product code | SLE/LR/16 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Crucible Retort Ring Used For?
Heating a crucible strongly, whether to ignite a precipitate in gravimetric analysis, find ash or moisture content, or bring a sample to constant mass, needs a support that holds the crucible steady without shading it from the flame. The three ceramic rods touch the crucible at just three points, so most of its surface is exposed to the heat, and ceramic will not react with or mark a platinum crucible the way bare metal can.
Mounted on a support stand, the ring lets you raise or lower the crucible to set the gap between the gas flame and the crucible bottom; on a tripod it gives a fixed working height. Set the rods by hand to the crucible before lighting the burner, let everything cool before adjusting again, and lift hot crucibles only with tongs.
What to Specify When Ordering
- The crucible sizes you will use, within the 0–70 mm range.
- Whether the ring will be mounted on a support stand or a tripod.
- The number of rings required.
- Whether crucibles or crucible tongs should be quoted as well.
Supplier
Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies the Crucible Retort Ring from Ambala, Haryana, to schools, colleges, research laboratories and dealers in India and international markets. The company sources the item for buyers who want it on the same order as their other stands, burners and crucible ware.
For availability and pricing, ask us with your quantity. Company details are on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Items used with a crucible ring during heating and ignition:
- Crucible with lid — the vessel held in the ring.
- Crucible Tong — for lifting the crucible once it has been heated.
- Bunsen Burner — the gas flame beneath the crucible.
- Retort Stand — a support stand for adjusting the height above the flame.
- Tripods — for a fixed-height set-up.
More supports are listed in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What crucible sizes does the Crucible Retort Ring hold?
The Crucible Retort Ring holds crucibles from 0 to 70 mm. The three clamping rods are set by hand to the size of the crucible in use, so one ring can serve several crucible sizes.
Can the Crucible Retort Ring be used with platinum crucibles?
Yes. The Crucible Retort Ring also fits platinum crucibles. Its ceramic clamping rods hold the crucible at three points, which avoids bare metal contact with the platinum during heating.
What temperature can the clamping rods withstand?
The Crucible Retort Ring uses ceramic Degussit clamping rods rated to a maximum of 2030 °C. The ring itself is 18/10 stainless steel; for use near the limits of your flame, ask us before ordering.
How is the Crucible Retort Ring mounted?
The Crucible Retort Ring is used with support stands or tripods. On a support stand, the distance between the gas flame and the crucible bottom can be adjusted; on a tripod, the working height is fixed.
Who supplies the Crucible Retort Ring?
The Crucible Retort Ring is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to institutions and dealers in India and international markets. Enquiries go through the contact page.
What should a Crucible Retort Ring enquiry include?
A Crucible Retort Ring enquiry should state the quantity, the crucible sizes you use, whether you mount on a stand or tripod, any crucibles or tongs needed, and the delivery location.
Request a Quote
Request a quotation through the contact page or add the Crucible Retort Ring to the enquiry cart.
Last updated: 24 September 2026
Burette Stand, Hard Wood, Double
Burette Stand, Hard Wood, Double (Product Code: SLE/LR/17) is a polished hardwood stand and clamp used to hold two burettes side by side for titrations in school and college chemistry labs. Built on a 290 × 110 mm base with rods of approx. 460 × 16 mm, it lets one titration station carry two burettes at once, for paired students or two different titrants. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a burette stand and clamp for Indian school labs.
Specifications
| Parameter | Detail |
|---|---|
| Type | Double burette stand with clamp |
| Material | Polished hardwood |
| Burettes held | Two |
| Rods | Approx. 460 × 16 mm |
| Base | 290 × 110 mm |
| Product code | SLE/LR/17 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Double Hardwood Burette Stand Used For?
Two burettes on one stand make several routines easier: running a sample and its blank or duplicate side by side, carrying out a back titration with two reagents, or letting two students share a station during board practicals. Teachers also use it to demonstrate a rough and an accurate titration next to each other so the class can compare end points.
Polished hardwood will not rust, and a quick wipe removes most spills, which suits benches where dilute acids and alkalis are handled every day. Put a white tile under each flask to see the colour change, keep the stand away from open flames, and dry it rather than soaking it after cleaning. A wider 290 mm base spreads the load of two filled burettes.
What to Specify When Ordering
- The number of double stands needed.
- Whether some benches need the single hardwood version instead.
- Whether burettes or burette brushes should be quoted as well.
OEM Manufacturer
Jain Scientific Equipments Private Limited, the company behind ScienceLab, is the OEM (original equipment manufacturer) of this double hardwood burette stand and produces it at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, laboratory dealers and importers deal with the maker directly, so there is no reseller margin between the factory and the lab.
For more stands in the same finish or a replacement clamp, ask us. The ScienceLab profile has company details.
Related Stand Bases, Rods and Rings
Other items for a titration bench:
- Burette Stand, Hard Wood, Single — the one-burette version on a 200 × 110 mm base.
- Burette — the glass burettes the stand holds.
- Brush Burette — for cleaning burettes between titrations.
- Burette Stand — a cast iron stand with black and white plates and a stainless rod.
See more in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
How many burettes does the Burette Stand, Hard Wood, Double hold?
The Burette Stand, Hard Wood, Double holds two burettes side by side in its hardwood clamp. That lets a sample and a blank, or two different titrants, be run at the same station.
What are the dimensions of the double hardwood burette stand?
The Burette Stand, Hard Wood, Double has a base of 290 × 110 mm and rods of approximately 460 × 16 mm. The wider base keeps the stand steady when both burettes are filled.
Why choose a hardwood burette stand?
A hardwood burette stand such as the Burette Stand, Hard Wood, Double does not rust, has a polished surface that wipes clean, and is light enough to move easily between benches in a school chemistry lab.
How is the double stand different from the single hardwood stand?
The Burette Stand, Hard Wood, Double holds two burettes on a 290 × 110 mm base, while the single version holds one burette on a 200 × 110 mm base. Both use rods of approx. 460 × 16 mm.
Who manufactures the Burette Stand, Hard Wood, Double?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Burette Stand, Hard Wood, Double as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and sells it factory-direct in India and international markets.
What does a quotation for the double stand need?
For a Burette Stand, Hard Wood, Double quotation, give the quantity, any single stands or burettes to include, and the delivery location. Send the details through the contact page.
Request a Quote
Ask for pricing on the contact page or add this stand to the enquiry cart; the manufacturer replies with the quotation.
Last updated: 24 September 2026
Burette Stand, Hard Wood, Single
Burette Stand, Hard Wood, Single (Product Code: SLE/LR/18) is a polished hardwood stand and clamp used to hold one burette upright over a titration flask at an individual student's place in chemistry practicals. Its compact 200 × 110 mm base, with rods of approx. 460 × 16 mm, fits narrow benches and lets a school equip every student position with its own titration set-up. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for school and college labs across India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Single burette stand with clamp |
| Material | Polished hardwood |
| Burettes held | One |
| Rods | Approx. 460 × 16 mm |
| Base | 200 × 110 mm |
| Product code | SLE/LR/18 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Single Hardwood Burette Stand Used For?
In class 11 and 12 volumetric analysis, each student usually runs their own titration, and a single stand per place keeps everyone working independently. The burette is held in the hardwood clamp above a conical flask, the student adds titrant drop by drop, and the end point is read from the burette scale. The small base also makes the stand easy to carry to and from the store room and to line up on shelves.
Before filling, check that the burette hangs straight in the clamp so the reading is not distorted. Wipe acid or alkali splashes from the polished wood promptly, keep the stand clear of burners, and let it air-dry after cleaning. For demonstrations or paired work, a double stand may suit better.
What to Specify When Ordering
- The number of single stands, typically one per student place.
- Whether a few double stands are wanted for teacher demonstrations.
- Whether burettes, flasks or burette racks should be included in the quote.
OEM Manufacturer
The single hardwood burette stand is made by Jain Scientific Equipments Private Limited under its ScienceLab brand, as the OEM (original equipment manufacturer), at its own licensed factory at Saha, Ambala, Haryana, India. The company holds MSME (Udyam) registration UDYAM-HR-01-0003714 with manufacturing as its major activity, and overseas orders are shipped under its DGFT Importer-Exporter Code AAECJ8618A.
Class sets and repeat orders are quoted by the manufacturer itself, so ask us for a matching batch when your lab grows. See the ScienceLab profile for company background.
Related Stand Bases, Rods and Rings
Items that complete a student titration place:
- Burette — the graduated glass tube held in the clamp.
- Conical Flask — the flask placed under the burette tip.
- Burette Rack — for storing burettes after the practical.
- Burette Stand, Hard Wood, Double — the two-burette version on a 290 × 110 mm base.
The complete range is in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
What size is the Burette Stand, Hard Wood, Single?
The Burette Stand, Hard Wood, Single has a 200 × 110 mm base and rods of approximately 460 × 16 mm. The small footprint lets one stand sit at each student place even on narrow benches.
Does the single hardwood stand include a clamp?
Yes. The Burette Stand, Hard Wood, Single is a stand and clamp made from polished hardwood, holding one burette. The burette itself is ordered separately, and we can quote it together with the stand.
Is the single hardwood burette stand suitable for class sets?
Yes. The Burette Stand, Hard Wood, Single is well suited to class sets because each student gets an independent titration place, and the compact stands are easy to store and carry between the lab and store room.
How should the hardwood stand be looked after?
Wipe spills off the Burette Stand, Hard Wood, Single straight away, dry it with a cloth, and keep it away from burner flames. Avoid soaking the wood in water, which can raise the grain and loosen joints.
Who manufactures the Burette Stand, Hard Wood, Single?
The Burette Stand, Hard Wood, Single is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is supplied direct to institutions and dealers.
What details does a quotation for single stands need?
For a Burette Stand, Hard Wood, Single quotation, give the number of stands, any double stands, burettes or racks to add, and the delivery location in India or abroad, using the contact page.
Request a Quote
Request a price through the contact page or add the stand to the enquiry cart. Quotations are prepared by the manufacturer.
Last updated: 24 September 2026
Retort Metalware Kit
Retort Metalware Kit (Product Code: SLE/LR/19) is a class set of retort stand metalware used to equip student work stations for basic chemistry experiments in schools and colleges. It contains five heavy-duty 200 × 125 mm retort bases, five 600 mm steel retort rods, five die cast retort clamps and five PVC coated retort clamps, so the set divides evenly into five stations, each with a base, a rod and two clamps. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a ready chemistry teaching kit for Indian schools.
Specifications
| Parameter | Detail |
|---|---|
| Type | Class set of retort metalware |
| Purpose | Essential metalware to start a basic chemistry experiment |
| Retort bases | 5 × heavy duty, 200 × 125 mm |
| Retort rods | 5 × steel, 600 mm long |
| Die cast retort clamps | 5 |
| PVC coated retort clamps | 5 |
| Product code | SLE/LR/19 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Retort Metalware Kit Used For?
Most first chemistry practicals need something held above the bench: a funnel over a beaker for filtration, a boiling tube over a burner, a delivery tube feeding a gas jar, or a condenser in a simple distillation. This kit gives a teacher enough bases, rods and clamps to run the same experiment at five stations at once, instead of sharing one stand around the room.
The two clamp types have different jobs. The die cast clamps give a firm, rigid grip for heavier items, while the PVC coated clamps cushion glass so test tubes and flasks are less likely to slip or crack. Set the bases on a flat bench, keep loads above the base, and count the pieces back in after class so every station stays complete.
What to Specify When Ordering
- The number of kits (each kit covers five stations).
- Any extra clamps, bossheads or retort rings needed for particular experiments.
- The delivery location, in India or abroad.
OEM Manufacturer
The Retort Metalware Kit is assembled by Jain Scientific Equipments Private Limited, trading as ScienceLab, which is the OEM (original equipment manufacturer) and makes it at its own licensed factory at Saha, Ambala, Haryana, India. The company is registered as an MSME manufacturer under Udyam number UDYAM-HR-01-0003714, and ships kits abroad under Importer-Exporter Code AAECJ8618A issued by the DGFT.
If a piece goes missing or is damaged, ask us about a replacement for that part. More information is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Add-ons that extend what the kit can do:
- Retort Rings — hold a funnel or a gauze on the rod.
- Retort Clamp 3 Prongs — an extra clamp for round flasks and condensers.
- Bosshead — for fixing additional clamps or rings to a rod.
- Gauze Wire — spreads the flame under glassware heated on a ring.
Browse the Stand Bases, Rods and Rings category and the Retort Clamp category.
Frequently Asked Questions
What is included in the Retort Metalware Kit?
The Retort Metalware Kit includes five heavy-duty retort bases of 200 × 125 mm, five steel retort rods 600 mm long, five die cast retort clamps and five PVC coated retort clamps, twenty pieces in all.
How many students can use one Retort Metalware Kit?
One Retort Metalware Kit equips five work stations, each with a base, a rod and two clamps. Larger classes simply order more kits, or add loose clamps and rods from our range.
Why does the kit contain two types of clamp?
The Retort Metalware Kit mixes die cast clamps, which grip heavier apparatus firmly, with PVC coated clamps, which cushion glassware such as test tubes and small flasks, so each station can hold both kinds of item.
Can extra parts be ordered with the Retort Metalware Kit?
Yes. Extra clamps, bossheads, retort rings or replacement rods and bases can be quoted alongside the Retort Metalware Kit. List what you need on the contact page.
Who manufactures the Retort Metalware Kit?
The Retort Metalware Kit is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is sold factory-direct to schools, colleges and dealers.
Is the Retort Metalware Kit available for bulk school orders or export?
Yes. The Retort Metalware Kit is supplied in bulk to schools and dealers in India and international markets. Give the number of kits and the delivery destination for a quotation.
Request a Quote
To buy class sets, contact us through the contact page or add the kit to the enquiry cart. Quotes come direct from the manufacturer.
Last updated: 24 September 2026
