- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Burner, High-Temperature Natural Gas
Burner, High-Temperature Natural Gas (Product Code: SLE/B/03) is a Meker-type laboratory burner used to produce a very hot, broad flame for jobs such as heating platinum wire, igniting crucibles and fusions in chemistry labs. Its honeycombed monel grid cap splits the gas into many uniform blue cones, and it stands 8 1/2 in tall on a one-piece chrome-plated venturi tube. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Meker-type high-temperature burner |
| Gas | Natural gas |
| Overall height | 8 1/2 in |
| Venturi tube | One-piece, chrome-plated |
| Cap | Honeycombed monel grid forming many uniform blue (hot) cones |
| Flame | Very hot, as for heating platinum wire |
| Product code | SLE/B/03 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the High-Temperature Natural Gas Burner Used For?
A Meker burner is chosen when a Bunsen flame is not hot or wide enough. Typical jobs are igniting precipitates in crucibles during gravimetric analysis, heating crucibles to constant mass, small fusions, and cleaning or heating platinum wire between samples in flame tests. Because the monel grid creates a bed of small blue cones, heat is spread across the whole top of the burner and a crucible or dish warms more evenly.
Connect the burner to a natural gas outlet with good tubing, light it at the grid and adjust the gas until the small cones are uniform and blue. Rest the crucible on a pipe-clay triangle just above the cones and handle hot ware only with tongs. Colleges teaching quantitative analysis and schools running a flame test kit find it a practical addition to their chemistry lab equipment.
OEM Manufacturer
This Meker-type burner is an OEM product of Jain Scientific Equipments Private Limited, which trades as ScienceLab. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and sells it straight from the factory to colleges, analytical teaching labs, dealers and importers instead of through a trading middleman. Questions about spare grids or repeat batches of SLE/B/03 can be put to us directly. Company details are on the profile page.
Related Burners
Accessories and alternatives used in the same high-temperature work:
- Meker Burner — another Meker-style burner for comparing options.
- Bunsen Burner Tubing — neoprene hose to connect the burner to the gas outlet.
- Gas Lighter, Piezo Electric — lights the grid without an open match.
- Crucible with lid — the vessel most often heated over a Meker flame.
- Crucible & Beaker Tongs — for handling hot crucibles safely.
Compare every heating option in the Burners category.
Frequently Asked Questions
How is the High-Temperature Natural Gas Burner different from a Bunsen burner?
The Burner, High-Temperature Natural Gas is a Meker type: its honeycombed monel grid cap forms many uniform hot blue cones, giving a hotter, broader heating area than the single cone of a Bunsen burner. That makes it better suited to crucible and platinum-wire work.
Can this high-temperature burner be used with LP gas?
The Burner, High-Temperature Natural Gas (SLE/B/03) is listed for natural gas only. If your laboratory runs on LP gas, contact us through the contact page before ordering so we can discuss a suitable option.
How tall is the SLE/B/03 burner and what is its tube made of?
The Burner, High-Temperature Natural Gas stands 8 1/2 in tall overall. Its venturi tube is a single chrome-plated piece, and the cap carries a honeycombed monel grid that spreads the flame into many small cones.
How should the monel grid be maintained?
Let the Burner, High-Temperature Natural Gas cool fully, then gently brush soot or spilled material off the monel grid so every opening stays clear. Do not push sharp tools through the honeycomb, as damaged cells give an uneven flame.
Is a flame temperature figure published for this burner?
No specific flame temperature is published for the Burner, High-Temperature Natural Gas; the product details describe it as very hot, as for heating platinum wire. If your method needs a stated figure, ask us through the contact page before ordering.
Who manufactures the High-Temperature Natural Gas Burner?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Burner, High-Temperature Natural Gas. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to institutions in India and international markets.
Request a Quote
For pricing on SLE/B/03, use the contact page or add the burner to the enquiry cart together with crucibles and tongs. Your quotation comes straight from the manufacturer.
Last updated: 24 September 2026
