Burner Tubing Manufacturer,Supplier and Exporter in India

Burner Tubing (Product Code: SLE/B/07) is a rubber-covered flexible steel gas line used to connect a bench gas tap to a laboratory burner. Its 5/16 in steel body is covered in rubber for gas-tightness and ends in a rubber connector at each end, giving a sturdier link than plain hose for daily Bunsen burner work. It is offered in 2 ft, 3 ft and 4 ft lengths and is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, among its lab equipment accessories.

Specifications

What Is Burner Tubing Used For?

The tubing links wall or bench gas outlets to Bunsen, Tirrill, Meker and Teclu burners during flame tests, heating of solutions and ignition work. Push one rubber connector fully onto the tap nozzle and the other onto the burner inlet, then open the gas and light the burner. The steel body resists kinks and knocks better than plain rubber hose on a crowded bench.

Choose the shortest length that reaches comfortably: the 2 ft size keeps the bench tidy when the burner sits beside the tap, while 3 ft and 4 ft lengths suit burners placed further along a bench or inside a fume cupboard. Whether you are equipping a new school lab or replacing worn hoses, check the rubber cover for cracks before each practical and keep the line clear of the flame and hot tripods.

What to Specify When Ordering

• Length: 2 ft, 3 ft or 4 ft, measured from the gas tap to where the burner will stand.
• Quantity of each length, for example one per burner plus a few spares.
• Tap nozzle or burner inlet details, if your fittings are non-standard.
• Any burners or lighters to be quoted together with the tubing.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, India, supplies this steel-bodied burner tubing as part of its burner accessory range. Schools, colleges and dealers can source it in the same order as burners, lighters and stands, with one point of contact for the whole heating set-up. Learn more on our company profile.

Related Burners

Burners and fittings that are connected with this tubing:

• Bunsen Burners — a general-purpose gas burner to connect at the far end.
• Bunsen Burner with Stopcock — adds gas shut-off at the burner inlet.
• Gas Lighter, Piezo Electric — lights the burner once gas is flowing.
• Bunsen Burner Tubing — a neoprene alternative with reinforced ends.
• Rubber Pipe For Bunsen Burner — another rubber hose option for gas taps.

More burners and accessories are listed on the Burners category page.

Frequently Asked Questions

Which lengths of Burner Tubing can I order?
Burner Tubing (SLE/B/07) is available in 2 ft, 3 ft and 4 ft lengths. Pick the shortest length that reaches from the gas tap to the burner without stretching, so no spare hose lies across the bench near the flame.

What does the 5/16 in size of Burner Tubing refer to?
5/16 in is the size given for this Burner Tubing in our product details. If you need the exact bore or outside diameter to match unusual tap nozzles or burner inlets, contact us through the contact page before ordering.

Will Burner Tubing fit the burners I already have?
Yes, Burner Tubing is made to fit all burners, with rubber connectors at both ends that push onto standard hose nozzles. If your burners or gas taps have non-standard fittings, send us the inlet size so we can check before dispatch.

Why choose steel-bodied tubing instead of plain rubber hose?
The flexible steel body of Burner Tubing stands up to kinks and knocks better than plain rubber hose, while its rubber covering keeps the line gas-tight. That makes it a sturdier choice for benches where tubing is connected and disconnected every day.

How do I check Burner Tubing for leaks?
With the gas on and the burner unlit, brush soapy water over both connections of the Burner Tubing; bubbles mean a leak. Replace the tubing if the rubber cover is cracked or the connectors have become loose.

Who supplies the Burner Tubing?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Burner Tubing (SLE/B/07). Laboratories in India and international markets can order it by length, together with burners and lighters, through one quotation.

Is Burner Tubing suitable for LP gas as well as natural gas?
The gas type is not specified for this Burner Tubing in our product details. Tell us which gas your laboratory uses and we will confirm suitability before you place the order.

Request a Quote

For prices on Burner Tubing in your chosen lengths, write to us through the contact page or add the item to your enquiry cart.

Last updated: 24 September 2026