- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Bunsen Burner Pilot Flame
Bunsen Burner Pilot Flame (Product Code: SLE/B/20) is a Bunsen burner with a separate pilot light tube, used to keep a small flame alight between heating steps in school, college and routine testing laboratories. Because the main flame can be brought back without relighting, it saves time when the burner is needed only intermittently, while a sleeve-type regulator and stopcock give reliable gas control. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Bunsen burner with pilot flame |
| Gas control | Sleeve-type regulator and stopcock |
| Pilot light tube | Screw adjustment for flame control |
| Base | Stamped steel with chrome plating |
| Suited to | Intermittent heating, where the burner is used on and off |
| Product code | SLE/B/20 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Bunsen Burner Pilot Flame Used For?
Many practicals alternate short bursts of heating with longer periods of observing, weighing or recording: repeated heating and cooling cycles, successive flame tests, sterilising a loop between transfers, or warming a tube for a few seconds before each reading. With a pilot flame, the main burner can be turned down between steps and brought back instantly, with no relighting and no fumbling for a lighter mid-experiment.
This makes it convenient for intermittent heating in a school chemistry lab and on shared benches where several students use one burner in turn. Adjust the pilot with its screw so it is small but stable, use the stopcock and sleeve regulator to set the main flame, and close the bench gas tap at the end of the session so both flames go out.
OEM Manufacturer
Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM, or original equipment manufacturer, of the Bunsen Burner Pilot Flame. The burner, with its pilot tube, stopcock and chrome-plated base, is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, institutions and dealers. With no middleman involved, quotations, repeat orders and requests for replacement parts all go straight to the maker. Our company profile has more about who we are.
Related Burners
Useful items and alternatives for on-off heating work:
- Burner Tubing — the gas connection from the bench tap
- Bunsen Burner with Stopcock — stopcock control without the pilot tube
- Burner With Flame Stabilizer — a steady flame for draughty positions
- Test Tube Holder, Metal — for short, repeated heating of tubes
- Flame Test Of Chemicals Lab Investigation — a stop-start activity that benefits from a pilot
View all burners in the Burners category.
Frequently Asked Questions
How does the Bunsen Burner Pilot Flame save time?
The Bunsen Burner Pilot Flame keeps a small pilot alight while the main flame is turned down, so the burner can be brought back to full heat instantly between steps. There is no need to relight it with a lighter in the middle of an experiment.
How is the pilot flame adjusted?
The pilot light tube on the Bunsen Burner Pilot Flame has its own screw adjustment. Turn it until the pilot is small but stable, so that it stays alight without wasting gas while the main flame is off.
How is the main gas flow controlled?
The main flame of the Bunsen Burner Pilot Flame is controlled through a sleeve-type regulator and a stopcock. Together they give reliable gas control, letting students set the flame and turn it down between heating steps.
Can the pilot be left burning unattended?
No. Even though the Bunsen Burner Pilot Flame keeps only a small pilot alight, any lit burner must stay supervised. Close the bench gas tap at the end of the session so that both the pilot and the main flame go out.
What is the base of the Bunsen Burner Pilot Flame made of?
The base of the Bunsen Burner Pilot Flame is stamped steel with chrome plating. Wipe it with a damp cloth once the burner is cool and dry it afterwards; avoid abrasive cleaners that could scratch the plating.
Which gas is the Bunsen Burner Pilot Flame designed for?
The fuel gas for the Bunsen Burner Pilot Flame is not specified in our product details. Let us know whether your laboratory uses natural gas or LPG, and we will confirm the correct configuration before sending a quotation.
Who manufactures the Bunsen Burner Pilot Flame?
The Bunsen Burner Pilot Flame is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes it at its own factory in Saha, Ambala, Haryana, India. Schools and dealers buy it factory-direct, with quotations issued by the manufacturer.
What should a school or college include in its enquiry?
When enquiring about the Bunsen Burner Pilot Flame, include the quantity, your fuel gas, any tubing needed and the delivery location in India or overseas. Send it through the contact page or enquiry cart for a quotation.
Request a Quote
Get a manufacturer's price for the Bunsen Burner Pilot Flame by contacting us or adding it to the enquiry cart.
Last updated: 24 September 2026
