Iron-Clad Electromagnet (Product Code: SLE/EM/14) is a compact but powerful electromagnet for showing how much force a coil and iron can produce from ordinary dry cells. The enamel-covered winding is enclosed in iron, which gathers the magnetic flux at the pole face and gives a very strong grip on an iron plate or bar placed across it; the listing rates it to lift up to 200 lb. It measures 75mm in diameter by 260mm in length and is supplied with instructions, with batteries not included. Manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it is a memorable addition to school physics lab equipment in India for the magnetic effects of current.

Specifications

Typical Use

The electromagnet is normally used as a teacher demonstration. With the current off, an iron plate falls away from the pole face; with the cell connected, the same plate is held so firmly that students struggle to pull it off, and a hanging load can be added to show the lifting force. Disconnecting the cell releases the load, which makes the point that an electromagnet can be switched — the principle behind scrap-yard lifting magnets, relays and electric door locks. Comparing the pull with the cell connected in each direction shows that the force does not depend on which way the current flows, only on its size.

Keep feet and hands out from under any suspended load, because it drops as soon as the circuit is broken. Connect the battery only for the length of each demonstration, since a strong electromagnet draws heavily on dry cells. As a demonstration model for the physics lab it pairs well with student-built electromagnets, letting the class see how the same idea scales up.

Manufacturer

Jain Scientific Equipments Private Limited manufactures this electromagnet in Ambala, Haryana, and sells it under the ScienceLab name to schools and colleges. Company background is available on our company profile.

Related Electricity Equipment

Other apparatus for teaching the magnetic effect of current:

• Electromagnet Kit — lets students build bar and U-shaped electromagnets themselves
• Electromagnet with Keeper — a U-core electromagnet with armature and hook for load tests
• U-Shaped Electromagnet — twin coils on a U core for studying pole arrangement
• Oersted’s Law Apparatus — shows the magnetic field of a current with a pivoted needle
• Magnet Set — permanent magnets for comparing strength with the electromagnet

View more items in our Electricity Equipments range.

Frequently Asked Questions

Which batteries does it use?
Batteries are not included. Our current documentation mentions both a single D cell and four 1.5 volt C batteries for this electromagnet, so please contact us to confirm the configuration supplied before you buy cells.

How much can it lift?
It is listed as lifting up to 200 lb. The force achieved in class depends on the condition of the cells and on a clean, flat contact between the pole face and the iron load.

What are its dimensions?
It measures 75mm in diameter by 260mm in length.

Can it be run from a bench power supply?
The listing specifies battery operation. If you plan to use a laboratory DC supply, ask us first for the coil rating.

Is it safe to use in class?
Yes, when operated by the teacher with loads kept low and students standing clear of anything suspended from it.

Is an iron keeper or load included?
The listing does not mention one. Please check with us through the contact page if you need a keeper or load plate.

Do you supply schools in bulk?
Yes. We supply institutions and distributors in India and international markets.

Request a Quote

Ask for a quotation on the Iron-Clad Electromagnet through our contact page, or add it to the enquiry cart and send us your full list.

Last updated: 24 September 2026

Electrics Kit (Product Code: SLE/EM/15) is a class-sized box of electrical components that lets primary pupils construct circuits, identify the parts they use and investigate what each component does. Motors, MES bulbs and holders, buzzers, push switches, battery holders, reels of wire and crocodile-clip leads are packed in a handy plastic storage box, together with the tools needed to cut and strip wire. Aimed at the Key Stage 2 electricity topic and manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, it is a hands-on science kit for primary school teachers who want every group building its own circuits.

Key Details

Kit contents:

• 10 x MJR3L 3.5 6 volt motors
• 20 x 6 volt MES screw bulbs
• 20 x MES button holders
• 2 x 6 volt buzzers
• 10 x 7.9mm push-fit pulleys
• 10 x cable ties
• 20 x PP3 battery snaps
• 10 x battery holders for 2 x HP11 cells
• 10 x battery holders for 4 x HP11 cells
• 1 x 100m red multicore wire
• 1 x 100m black multicore wire
• 20 x double-ended crocodile-clip leads
• 5 x 5 amp connector strips
• 1 x automatic wire stripper/cutter
• 4 x small 3mm electrician’s screwdrivers
• 5 x push-to-make red switches
• 5 x push-to-break black switches

Typical Use

A first lesson usually has groups light a single MES bulb from a battery holder, then add a second bulb in series and in parallel and compare the brightness. Swapping the bulb for a buzzer or motor shows that the same circuit can produce light, sound or movement, and fitting a push-fit pulley to a motor shaft leads into simple spinning models. The red push-to-make and black push-to-break switches let pupils design doorbell and alarm circuits and explain why each switch type suits its job. Cutting lengths from the red and black multicore reels and fixing them in the connector strips with the small screwdrivers teaches neat, colour-coded wiring.

The wire stripper/cutter and screwdrivers are best handled by the teacher or under close supervision. Dry cells are not in the contents list, so order HP11 (C-size) or PP3 batteries to suit the holders and snaps you plan to use, and remove cells before the box goes back into storage. As a junior lab kit for primary school science rooms, it keeps every component in one box so setup and pack-away take minutes.

Manufacturer

The Electrics Kit is put together and packed under the ScienceLab brand by Jain Scientific Equipments Private Limited of Ambala, Haryana, which produces practical kits and apparatus for schools. See the company profile for more about us.

Related Electricity Equipment

Useful additions and spares for primary circuit work:

• MES Bulb Holder — screw-terminal holders for MES lamps when more stations are needed
• Crocodile Clips & Leads — extra clip-ended leads in packs of 20
• Battery Clip, PP3 — spare PP3 clips with leads
• Digital Multimeter — for teachers checking cells and circuits during the lesson

More circuit apparatus is available in our Electricity Equipments range.

Frequently Asked Questions

What is included in the Electrics Kit?
Motors, MES bulbs and button holders, buzzers, pulleys, cable ties, PP3 snaps, battery holders, red and black multicore wire, crocodile-clip leads, connector strips, a wire stripper/cutter, screwdrivers and push switches, as itemised above, in a plastic storage box.

Are batteries included?
No cells appear in the contents list. The kit has holders for HP11 cells and PP3 snaps, so buy the cells separately.

Which age group is it for?
It is aimed at the Key Stage 2 electricity topic, which covers upper-primary pupils.

How many groups can work from one kit?
Quantities such as 20 bulbs, 20 holders and 20 crocodile-clip leads are sized for group work; contact us to plan the number of kits for your class sizes.

Can individual components be replaced?
Please ask through the contact page for replacement bulbs, motors or other items.

What does a school or tender quotation need?
The number of kits, delivery address, whether batteries should be quoted, and any tender forms. We supply across India and to international markets.

Request a Quote

Request pricing for the Electrics Kit on our contact page, or place it in the enquiry cart with the rest of your primary science order.

Last updated: 24 September 2026

Bunsen Burner with Flame Stabilizer (Product Code: SLE/B/01) is a no-tip laboratory gas burner used for heating, sterilising and flame work in school and college practical labs. Its 6 in square, powder-coated metal alloy base stops it tipping over during use and keeps it steady when a gas hose is attached, and it is offered for natural gas or LP gas. This Bunsen burner for schools in India is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Bunsen Burner with Flame Stabilizer Used For?

Bunsen burners are knocked over most often when a student tugs on the hose or reaches across the bench. The wide square base of this model is designed to prevent exactly that, which makes it a sensible choice for junior practical classes. It is used for heating liquids in beakers or test tubes, sterilising inoculating loops in microbiology, bending glass tubing and flame tests in inorganic chemistry.

Before lighting, push the hose fully onto the gas inlet and make sure the needle valve is closed. Hold a lit lighter beside the top of the tube, then open the valve slowly until the flame is steady. For beakers and flasks, stand a tripod with wire gauze over the burner so the heat spreads evenly under the glass.

What to Specify When Ordering

• Gas type: natural gas or LP gas, matching the supply at your laboratory benches.
• Quantity: the number of burners per lab or per class set.
• Accessories: whether gas tubing, lighters, tripods or gauzes should be quoted with the burners, as they are listed separately.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of this no-tip Bunsen burner. It is made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and it goes factory-direct to schools, colleges, dealers and importers. For spare parts or repeat orders of SLE/B/01, ask us and the manufacturer will handle it directly. Read more on our company profile.

Related Burners

Items usually set up with this burner on a practical bench:

• Bunsen Burner Tubing — flexible neoprene hose to connect the burner to the gas outlet.
• Gas Lighter, Piezo Electric — lights the burner without matches.
• Tripod Cast Iron Varnished — supports beakers and flasks over the flame.
• Gauze Wire, Ceramic Centre — spreads heat evenly under glassware on the tripod.
• Burner With Flame Stabilizer — an alternative whose annular stabilizer top steadies the main flame.

See all gas, alcohol and electric heating options in the Burners category.

Frequently Asked Questions

Which gas does the Bunsen Burner with Flame Stabilizer run on?
The Bunsen Burner with Flame Stabilizer (SLE/B/01) is offered for either natural gas or LP gas. State which gas your laboratory uses when you order, so the burner you receive is set up for your bench supply.

Why does this Bunsen burner resist tipping over?
The Bunsen Burner with Flame Stabilizer stands on a 6 in square, powder-coated metal alloy base. The wide square footprint keeps it upright during use and steady when the attached gas hose is pulled, reducing the risk of accidents and fire hazards on a busy bench.

What is the Bunsen Burner with Flame Stabilizer made of?
The Bunsen Burner with Flame Stabilizer combines a brass needle valve for gas control, an aluminium mixing tube and a powder-coated metal alloy base. Together they give a stable and durable burner for daily use in school and college practical classes.

Is gas tubing included with the SLE/B/01 burner?
Gas tubing is not listed as part of the Bunsen Burner with Flame Stabilizer. Order Bunsen Burner Tubing or Burner Tubing separately, or ask us to add tubing to the same quotation so the burner and hose arrive together.

Who manufactures the Bunsen Burner with Flame Stabilizer?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Bunsen Burner with Flame Stabilizer. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, so quotations, spares and repeat orders come straight from the manufacturer.

How should the Bunsen Burner with Flame Stabilizer be looked after?
Let the Bunsen Burner with Flame Stabilizer cool completely before storage, keep the mixing tube free of debris and spilled chemicals, and check the hose regularly for cracks. Close the needle valve gently after use and wipe spills off the powder-coated base.

Can ScienceLab supply a class set of these burners?
Yes. ScienceLab quotes the Bunsen Burner with Flame Stabilizer in class-set quantities for schools, colleges and dealers in India and international markets. Send the quantity and gas type through the contact page for a factory-direct quotation.

Request a Quote

To price the Bunsen Burner with Flame Stabilizer (SLE/B/01), send your quantity and gas type through the contact page or add it to the enquiry cart with tubing and tripods. Quotations come direct from the manufacturer.

Last updated: 24 September 2026

Bunsen Burner Tubing (Product Code: SLE/B/02) is a 3 ft flexible neoprene hose used to carry gas from a bench outlet to a Bunsen burner in school, college and research laboratories. Its reinforced ends give a safe, convenient connection at both the burner and the gas outlet, the two points where a plain hose usually works loose first. This burner accessory is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its lab consumables range.

Specifications

What Is Bunsen Burner Tubing Used For?

Gas hose is the part of a burner set-up that wears out first: it gets bent sharply, stretched, splashed with chemicals and left near hot glassware. Swapping in fresh tubing on a regular schedule is one of the simplest safety steps a lab can take, and the 3 ft length reaches from a bench tap to the working area without loops of hose trailing across the bench.

To fit it, push one reinforced end fully over the burner inlet and the other over the gas outlet, then brush soapy water over both joints before lighting: bubbles mean a leak. Route the hose away from the flame and hot plates. Lab managers buying chemistry consumables usually keep a few spare pieces so that a damaged hose can be replaced the same day.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, based in Ambala, Haryana, India. The company supplies this neoprene tubing as a burner accessory, so that schools and colleges can source burners, hoses and lighters in a single order. Background on the company is on our company profile.

Related Burners

Burners and alternatives that work with gas tubing:

• Bunsen Burner with Flame Stabilizer — a no-tip burner that stays steady when the hose is attached.
• Bunsen Burner with Stopcock — lets the user shut off gas at the burner end of the hose.
• Burner Tubing — a rubber-covered flexible steel alternative offered in several lengths.
• Rubber Pipe For Bunsen Burner — a rubber hose option for labs that prefer it.
• Gas Lighter, Piezo Electric — for lighting the burner once the hose is connected.

Browse all burners and accessories in the Burners category.

Frequently Asked Questions

How long is the Bunsen Burner Tubing?
Each piece of Bunsen Burner Tubing (SLE/B/02) is 3 ft long. That usually reaches from a bench gas tap to the working area without spare hose trailing across the bench; for other lengths, compare the Burner Tubing listed in the same category.

What is Bunsen Burner Tubing made of?
Bunsen Burner Tubing is made of flexible neoprene, a synthetic rubber, and has reinforced ends at both the burner and gas-outlet connections. The reinforced ends are what give the safe, convenient connection that a teaching laboratory needs.

Will the Bunsen Burner Tubing fit my burner and gas tap?
Bunsen Burner Tubing is intended for standard burner-to-outlet connections, but its bore size is not listed in our product details. Send the inlet and outlet sizes of your burners and taps through the contact page and we will confirm the fit.

When should Bunsen burner tubing be replaced?
Replace Bunsen Burner Tubing as soon as it shows cracks, stiffness, cuts, burn marks or a loose fit at either end, and at once if a soapy-water check reveals a leak. Keeping a few spare pieces lets a damaged hose be swapped immediately.

Can Bunsen Burner Tubing be used with LP gas as well as natural gas?
The gas type is not specified for Bunsen Burner Tubing in our product details. Tell us whether your laboratory uses natural gas or LP gas, and the supply pressure, and we will advise on suitability before you order.

Who supplies the Bunsen Burner Tubing?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies the Bunsen Burner Tubing (SLE/B/02) as an accessory in its burner range. Schools, colleges and dealers in India and international markets can order it together with burners and lighters.

What should a quotation request for this tubing include?
For Bunsen Burner Tubing, state the product code SLE/B/02, the number of pieces needed, any burners or lighters to be quoted alongside, and the delivery location. Send these details through the contact page or add the item to the enquiry cart.

Request a Quote

To order Bunsen Burner Tubing (SLE/B/02), send your requirement through the contact page or add it to the enquiry cart with your burners.

Last updated: 24 September 2026

Burner, High-Temperature Natural Gas (Product Code: SLE/B/03) is a Meker-type laboratory burner used to produce a very hot, broad flame for jobs such as heating platinum wire, igniting crucibles and fusions in chemistry labs. Its honeycombed monel grid cap splits the gas into many uniform blue cones, and it stands 8 1/2 in tall on a one-piece chrome-plated venturi tube. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the High-Temperature Natural Gas Burner Used For?

A Meker burner is chosen when a Bunsen flame is not hot or wide enough. Typical jobs are igniting precipitates in crucibles during gravimetric analysis, heating crucibles to constant mass, small fusions, and cleaning or heating platinum wire between samples in flame tests. Because the monel grid creates a bed of small blue cones, heat is spread across the whole top of the burner and a crucible or dish warms more evenly.

Connect the burner to a natural gas outlet with good tubing, light it at the grid and adjust the gas until the small cones are uniform and blue. Rest the crucible on a pipe-clay triangle just above the cones and handle hot ware only with tongs. Colleges teaching quantitative analysis and schools running a flame test kit find it a practical addition to their chemistry lab equipment.

OEM Manufacturer

This Meker-type burner is an OEM product of Jain Scientific Equipments Private Limited, which trades as ScienceLab. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and sells it straight from the factory to colleges, analytical teaching labs, dealers and importers instead of through a trading middleman. Questions about spare grids or repeat batches of SLE/B/03 can be put to us directly. Company details are on the profile page.

Related Burners

Accessories and alternatives used in the same high-temperature work:

• Meker Burner — another Meker-style burner for comparing options.
• Bunsen Burner Tubing — neoprene hose to connect the burner to the gas outlet.
• Gas Lighter, Piezo Electric — lights the grid without an open match.
• Crucible with lid — the vessel most often heated over a Meker flame.
• Crucible & Beaker Tongs — for handling hot crucibles safely.

Compare every heating option in the Burners category.

Frequently Asked Questions

How is the High-Temperature Natural Gas Burner different from a Bunsen burner?
The Burner, High-Temperature Natural Gas is a Meker type: its honeycombed monel grid cap forms many uniform hot blue cones, giving a hotter, broader heating area than the single cone of a Bunsen burner. That makes it better suited to crucible and platinum-wire work.

Can this high-temperature burner be used with LP gas?
The Burner, High-Temperature Natural Gas (SLE/B/03) is listed for natural gas only. If your laboratory runs on LP gas, contact us through the contact page before ordering so we can discuss a suitable option.

How tall is the SLE/B/03 burner and what is its tube made of?
The Burner, High-Temperature Natural Gas stands 8 1/2 in tall overall. Its venturi tube is a single chrome-plated piece, and the cap carries a honeycombed monel grid that spreads the flame into many small cones.

How should the monel grid be maintained?
Let the Burner, High-Temperature Natural Gas cool fully, then gently brush soot or spilled material off the monel grid so every opening stays clear. Do not push sharp tools through the honeycomb, as damaged cells give an uneven flame.

Is a flame temperature figure published for this burner?
No specific flame temperature is published for the Burner, High-Temperature Natural Gas; the product details describe it as very hot, as for heating platinum wire. If your method needs a stated figure, ask us through the contact page before ordering.

Who manufactures the High-Temperature Natural Gas Burner?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Burner, High-Temperature Natural Gas. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to institutions in India and international markets.

Request a Quote

For pricing on SLE/B/03, use the contact page or add the burner to the enquiry cart together with crucibles and tongs. Your quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Alcohol Lamp with Metal Cap (Product Code: SLE/B/04) is a 4 oz spirit lamp used for gentle, portable heating in classrooms and labs that have no gas supply. A metal screw-cap seals the fuel, and a separate metal cap is placed over the wick to put out the flame and stop evaporation between lessons; replacement wicks are available. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for school laboratory setups across the country and abroad.

Specifications

What Is the Alcohol Lamp with Metal Cap Used For?

Spirit lamps are the usual heat source in classrooms without piped gas and in lessons where a small, quiet flame is enough: warming a test tube of water, melting wax, heat-fixing a smear on a microscope slide, or flaming a wire loop in an introductory microbiology practical. Because the flame is modest, younger students can work with it under supervision more comfortably than with a gas burner.

Fill the lamp only when it is cold and unlit, wipe off any spilled fuel, and trim the wick so a short length stands above the holder. To put the flame out, lower the metal cap over the wick instead of blowing on it, and leave the cap on so the fuel does not evaporate before the next lesson. Keep the refill bottle away from the bench while the lamp is lit.

What to Specify When Ordering

• Number of lamps: one per student group or workstation is typical for a class.
• Replacement wicks: how many spare wicks to include, so a charred wick can be changed straight away.
• Fuel and supports: whether burning alcohol or a burner stand should be quoted with the lamps, as they are listed separately.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this spirit lamp. The lamp is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and is supplied factory-direct to schools, colleges, dealers and importers, so replacement wicks and repeat orders are handled by the maker itself. For vendor registration, institutional buyers can use the company's GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. More about us is on our company profile.

Related Burners

Fuel, supports and alternatives often ordered with the lamp:

• Denatured Ethanol (Alcohol for burning) — fuel for spirit lamps.
• Alcohol Burner Stand — holds a small beaker or dish above the flame.
• Wicks For Glass Spirit Burner — spare wicks; confirm the fit for this lamp when ordering.
• Alcohol Burner, Wickless — a tip-resistant alternative that uses a torch instead of a wick.
• Test Tube Holder — for holding tubes safely in the flame.

More heating equipment is listed in the Burners category.

Frequently Asked Questions

What size is the Alcohol Lamp with Metal Cap?
The Alcohol Lamp with Metal Cap (SLE/B/04) is a 4 oz size. That is a convenient bench lamp for small heating tasks such as warming test tubes, heat-fixing slides and flaming wire loops in school practicals.

How do I put out the flame on this alcohol lamp?
Lower the metal cap of the Alcohol Lamp with Metal Cap over the wick; never blow the flame out. Leaving the cap in place afterwards also limits evaporation of the fuel, so the lamp is ready for the next lesson.

Are replacement wicks available for the Alcohol Lamp with Metal Cap?
Yes, replacement wicks are available for the Alcohol Lamp with Metal Cap. State how many spare wicks you want in your enquiry so they can be quoted and packed together with the lamps.

Which fuel should the Alcohol Lamp with Metal Cap use?
Use only alcohol intended for burning, such as denatured ethanol, in the Alcohol Lamp with Metal Cap. Never use petrol or other volatile fuels. Fuel is not listed as included and can be quoted separately with the lamps.

Who manufactures the Alcohol Lamp with Metal Cap?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Alcohol Lamp with Metal Cap. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and quotations come straight from the manufacturer.

What does a school need to include in a quotation request?
For the Alcohol Lamp with Metal Cap, give the product code SLE/B/04, the number of lamps and spare wicks, any fuel or stands required, and the delivery address in India or overseas. Send it through our contact page.

Request a Quote

Request a price for the Alcohol Lamp with Metal Cap through the contact page, or add lamps, wicks and fuel to the enquiry cart in one go. You will receive the quotation directly from the manufacturer.

Last updated: 24 September 2026

Alcohol Burner, Wickless (Product Code: SLE/B/05) is a tip-resistant spirit burner used as a portable heat source in classrooms and field labs without gas, burning denatured alcohol through a copper-plated torch instead of a cotton wick. It holds up to 95 mL of fuel, burns for over an hour on one filling and will not leak even when tipped. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its educational laboratory equipment.

Specifications

What Is the Wickless Alcohol Burner Used For?

The biggest worry with spirit lamps in a busy classroom is a lamp being knocked over and spilling burning fuel. This burner tackles that directly: it resists tipping and does not leak if it does go over, which makes it a sensible choice for younger students and crowded benches. One filling lasts over an hour, enough for a double practical without refuelling mid-lesson.

Typical tasks include heating small volumes of water or solutions on a stand, evaporation and simple distillation demonstrations, and heat experiments in physics. Its low 3 in height suits short burner stands. Fill it only when cool and unlit, light the torch, and cover it with the aluminium snuffer cap to extinguish. Schools planning a school laboratory setup in India without gas lines often choose wickless burners for every workstation.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known by its trade name ScienceLab, is the original equipment manufacturer (OEM) of this wickless burner. It is built at the company's own licensed factory in Saha, Ambala, Haryana, India, not sourced from a reseller, and dispatched factory-direct to schools, science clubs, distributors and importers. Enquiries about replacement snuffer caps or repeat orders go straight to the manufacturer, so just ask us. See the company profile page.

Related Burners

Fuel and accessories for a complete spirit-burner station:

• Denatured Ethanol (Alcohol for burning) — the fuel this burner is designed to hold.
• Alcohol Burner Stand — supports glassware above the flame.
• Gauze Wire, Ceramic Centre — spreads heat under beakers on a stand.
• Butane Lighter — lights the torch from a safe distance.
• Alcohol Lamp with Metal Cap — a wick-type alternative for comparison.

View the full range in the Burners category.

Frequently Asked Questions

Why choose a wickless alcohol burner?
The Alcohol Burner, Wickless uses a copper-plated torch in place of a cotton wick, so there is no wick to trim, char or replace, and the torch gives even heat distribution. It also resists tipping and will not leak if knocked over.

How much fuel does the Alcohol Burner, Wickless hold and how long does it burn?
The Alcohol Burner, Wickless (SLE/B/05) holds up to 95 mL of denatured alcohol, and one filling burns for over an hour. That is usually enough for a full double practical without stopping to refuel.

What happens if a student knocks the wickless burner over?
The Alcohol Burner, Wickless is designed to be tip-resistant, and even when tipped it will not leak. Teachers should still keep flammable materials clear of the bench and supervise students whenever the burner is lit.

How is the flame on the Alcohol Burner, Wickless extinguished?
Cover the torch of the Alcohol Burner, Wickless with the aluminium snuffer cap that comes with each burner. The cap starves the flame of air; never blow it out or refill the burner while it is still warm.

Who manufactures the Alcohol Burner, Wickless?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Alcohol Burner, Wickless. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and is quoted directly by the manufacturer to buyers in India and international markets.

Can ScienceLab supply wickless burners for a whole school?
Yes. ScienceLab supplies the Alcohol Burner, Wickless in quantity to schools and distributors in India and international markets. Share the number of burners and any fuel or stands needed through our contact page.

Request a Quote

For a quotation on SLE/B/05, contact us through the contact page or add burners and fuel to the enquiry cart. Quotes are issued directly by the manufacturer.

Last updated: 24 September 2026

Alcohol Burner Stand (Product Code: SLE/B/06) is a chrome-plated steel wire support used to hold a small beaker, dish or crucible above a spirit lamp or alcohol burner, so the vessel is heated without being hand-held. Its heavy wire-gauze top measures 3 x 3 in, and the 5 in overall height leaves room for burners of all sizes underneath. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as school chemistry lab equipment.

Specifications

What Is the Alcohol Burner Stand Used For?

Stand it on a heat-resistant bench surface, slide the lit alcohol burner underneath so the flame sits below the centre of the gauze, and rest a small beaker, evaporating dish or crucible on top. Common classroom tasks include warming water for solubility work, evaporating a few millilitres of salt solution to recover crystals, and gentle heating in biology preparation rooms or outreach sessions where no gas line is available.

In spirit-lamp setups it takes the place of the tripod stand and wire gauze used with taller, hotter gas burners. Keep the vessel base within the 3 x 3 in top so it cannot slip off, put the burner out before moving anything, and let the wire frame cool before handling, because metal wire conducts heat quickly.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of this burner stand. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought from a trader, and stands go factory-direct to schools, colleges, dealers and importers. For repeat orders or matching stands for an existing lab, ask us and the manufacturer will quote directly. Read our company profile for background.

Related Burners

Items used together with this stand in spirit-lamp heating work:

• Alcohol Burner, Wickless — a tip-resistant fuel burner to place beneath the gauze top.
• Alcohol Lamp with Metal Cap — a wick-type lamp whose cap snuffs the flame after heating.
• Glass Spirit Lamp — a glass-bodied lamp option for the same setup.
• Butane Lighter — lights the burner without matches.
• Glass Beaker — a small vessel for heating liquids on the stand.

Browse every heat source and accessory in the Burners category.

Frequently Asked Questions

How big is the Alcohol Burner Stand?
The Alcohol Burner Stand (SLE/B/06) has a 3 x 3 in heavy wire-gauze top and an overall height of 5 in. That height was chosen so that alcohol burners and spirit lamps of all sizes fit underneath the gauze.

Is an alcohol burner included with the stand?
No burner is included with the Alcohol Burner Stand; burners and lamps are listed as separate products. If you would like a stand and burner quoted together, mention both in your enquiry through our contact page.

Can the Alcohol Burner Stand be used over a Bunsen burner?
The Alcohol Burner Stand is intended for alcohol burners and spirit lamps. Gas burners are generally taller and give a hotter flame, so a tripod stand with wire gauze is the usual support for a Bunsen burner instead.

Which vessels sit safely on the stand?
Flat-bottomed vessels such as small beakers, evaporating dishes and crucibles that fit within the 3 x 3 in gauze of the Alcohol Burner Stand. Round-bottomed flasks should be held with a clamp rather than balanced on top.

How should the Alcohol Burner Stand be cleaned?
Let the Alcohol Burner Stand cool fully, then wipe the chrome-plated steel wire with a damp cloth and dry it. Avoid abrasive scourers, which can scratch the plating, and brush any residue off the gauze top.

Who manufactures the Alcohol Burner Stand?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Alcohol Burner Stand. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and class sets are quoted directly by the manufacturer for India and international markets.

Request a Quote

To request pricing for the Alcohol Burner Stand, send your quantity and delivery location through our contact page, or add it to the enquiry cart with other items for your lab. The quotation comes straight from the manufacturer.

Last updated: 24 September 2026