Bunsen Burner with Stopcock (Product Code: SLE/B/11) is a Bunsen gas burner used for general laboratory heating, with a stopcock fitted in its inlet tube so the gas flow can be controlled at the burner itself. It follows the design of our SLE/B/10 Bunsen Burners, letting teaching and research labs pause or fine-tune the flame without reaching back to the bench tap. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, among its chemistry lab instruments.

Specifications

Dimensions and construction follow the SLE/B/10 model described on the Bunsen Burners page.

What Is the Bunsen Burner with Stopcock Used For?

With the stopcock on the inlet, gas can be turned down between steps of an experiment, for example while a student reads a thermometer or changes a test tube, and turned back up without disturbing the connection at the tap. That is convenient in fume cupboards where the outlet is at the back, on long benches where several burners share one supply, and in practicals that alternate short heating periods with observation.

In every other respect it is used like a standard Bunsen burner: connect the tubing, open the bench tap, light the burner, then set the flame with the stopcock and the air regulator. Always close the bench tap as well as the stopcock at the end of the session so the tubing is not left under pressure.

OEM Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited sells the burners it makes, and the company is the OEM (original equipment manufacturer) of this stopcock model. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, dealers and importers, so a lab can standardise on matching SLE/B/10 and SLE/B/11 burners from one maker. For spares or repeat orders, simply ask us. Company background is on our profile page.

Related Burners

Items that pair with this burner or offer an alternative:

• Bunsen Burners — the SLE/B/10 model this burner is based on, without the stopcock.
• Burner Tubing — gas line from the bench tap to the inlet.
• Burner Bunsen With Stopcock — a stopcock burner listed in our chemistry range.
• Gauze Wire, Ceramic Centre — spreads the flame under glassware on a tripod.
• Crucible & Beaker Tongs — for lifting hot vessels off the flame.

The Burners category lists every burner we offer.

Frequently Asked Questions

How is the Bunsen Burner with Stopcock different from the SLE/B/10 burner?
The Bunsen Burner with Stopcock (SLE/B/11) follows the SLE/B/10 Bunsen burner design but has a stopcock fitted in the inlet tube. That stopcock lets the user control or pause the gas flow at the burner rather than at the bench tap.

Where can I find the dimensions of the Bunsen Burner with Stopcock?
The Bunsen Burner with Stopcock follows the dimensions and construction of the SLE/B/10 model shown on the Bunsen Burners page. Contact us if you need those figures confirmed in writing on your quotation.

Can I rely on the stopcock instead of the bench tap?
No. On the Bunsen Burner with Stopcock, use the stopcock for adjusting and pausing the flame, but always shut the bench tap at the end of work as well, so the tubing between tap and burner is not left under gas pressure.

What should I do if the stopcock becomes stiff?
Do not force the stopcock on the Bunsen Burner with Stopcock or apply ordinary oil. Once the burner is cool, clean off any residue around the stopcock, and if it stays stiff, contact us for advice through the contact page.

Is the Bunsen Burner with Stopcock suitable for LPG?
The gas type is not specified for the Bunsen Burner with Stopcock in our product details. Tell us whether your laboratory uses natural gas or LPG so we can confirm the right configuration before the burners are dispatched.

Who manufactures the Bunsen Burner with Stopcock?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Bunsen Burner with Stopcock. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and institutional and export quotations are issued directly by the manufacturer.

What information speeds up a quotation for this burner?
For the Bunsen Burner with Stopcock, send the quantity, your gas type, any tubing or stands needed, and the delivery location in India or abroad. With those details the quotation can be prepared in a single step.

Request a Quote

Send an enquiry for the Bunsen Burner with Stopcock via our contact page or add it to the enquiry cart. Quotes come direct from the manufacturer.

Last updated: 24 September 2026

Magnet Set of 4 (Product Code: SLE/MG/06) is a set of four alnico permanent magnets with keepers, used to compare bar and horseshoe magnets in school physics experiments. It contains two 80 mm bar magnets plus a small and a large horseshoe magnet, so one set covers both basic magnet shapes. The set is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a compact physics experiment kit for school labs.

Specifications

What Is the Magnet Set of 4 Used For?

Having both shapes in one set lets a group work through the key comparisons without borrowing magnets from another bench. Students can use the two bar magnets to show attraction and repulsion between poles, then compare the small and large horseshoe magnets to see how a bigger magnet with poles further apart lifts more. Sprinkling iron filings over each magnet in turn shows the difference between the open field around a bar and the concentrated field in a horseshoe gap.

Alnico magnets are strong for their size but can lose strength if knocked or left unprotected, so the keepers matter. After each lesson, store the two bar magnets side by side with opposite poles together and a keeper across each end, and place a keeper across each horseshoe. This keeps the set useful as a physics experiment kit for school classes year after year.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM of the Magnet Set of 4 and makes it at its own licensed factory at Saha, Ambala, Haryana, India. The company is a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714), and overseas orders ship under Importer-Exporter Code AAECJ8618A.

Because the quotation comes from the maker, you can ask about extra keepers or single replacement magnets for sets already in your lab; just ask us. The company profile has more about ScienceLab.

Related Magnets

Products often ordered with this alnico set:

• Steel Horseshoe Magnet — larger horseshoe magnets up to 150 mm long.
• Economy Alnico Bar Magnets — extra alnico bar magnet pairs for more groups.
• Magnet Set — adds vials of iron filings and steel pieces for strength tests.
• Compass Plotting (Clear) — for plotting the field around each magnet.

For more magnets and magnet kits, see the Magnets category.

Frequently Asked Questions

What magnets are in the Magnet Set of 4?
The Magnet Set of 4 (SLE/MG/06) contains 2 alnico bar magnets of 80 mm x 15 mm x 10 mm, a small horseshoe magnet 25 mm tall x 8 mm wide and a large horseshoe magnet 35 mm tall x 15 mm wide, all with keepers.

What material are the magnets made from?
All four magnets in the Magnet Set of 4 are alnico, an alloy magnet that gives a strong field for its size. Alnico should be stored with keepers in place, which is why keepers are included with the set.

Why does the set include keepers?
The keepers in the Magnet Set of 4 close the magnetic path across the poles when the magnets are stored. This helps the alnico bar and horseshoe magnets hold their strength between lessons, so students should replace them after every practical.

Which experiments suit the Magnet Set of 4?
The Magnet Set of 4 suits experiments on attraction and repulsion, identifying poles, comparing bar and horseshoe field patterns with iron filings, and comparing the lifting strength of the small and large horseshoe magnets.

Who manufactures the Magnet Set of 4?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Magnet Set of 4 (SLE/MG/06), producing it at its own licensed factory at Saha, Ambala, Haryana, India, and quoting schools, dealers and importers directly.

Can the Magnet Set of 4 be supplied for a whole class or for export?
Yes, the Magnet Set of 4 can be quoted in class-set, tender and dealer quantities, and for export to international markets. Tell us the number of sets and the delivery location through our contact page.

Request a Quote

Quotations for the Magnet Set of 4 come direct from the manufacturer. Send your enquiry via the contact page or add the set to the enquiry cart.

Last updated: 24 September 2026

Natural Gas Burner (Product Code: SLE/B/12) is a bench gas burner used for everyday heating in chemistry, biology and general teaching labs, built for precise, low-effort flame control. A needle valve meters the gas, while a heavy-gauge mixing tube threaded into a heavy die-cast zinc alloy base sets the air, giving an efficient, durable burner that stays put while it is adjusted. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Natural Gas Burner Used For?

Open the needle valve slightly, light the gas at the top of the mixing tube, then turn the tube on its thread to admit more air until the flame becomes a clean blue cone. Fine gas adjustment at the valve makes it easy to hold a small, gentle flame for warming solutions or a larger one for boiling, which is useful in flame tests, salt analysis and routine heating on a tripod and gauze.

Because the controls sit at the heavy base rather than on a light tube, students can adjust the flame without knocking the burner over. Close the needle valve gently when finished, as overtightening can wear the valve seat, and wipe spills off the zinc alloy base once it is cool. It is a dependable choice for any chemistry lab in India that runs on piped natural gas.

OEM Manufacturer

This burner is made by Jain Scientific Equipments Private Limited, which trades as ScienceLab and acts as its OEM (original equipment manufacturer). Production takes place at the company's own licensed factory at Saha, Ambala, Haryana, India, and the burners are sold factory-direct to schools, colleges, dealers and importers without a trading layer in between. Ask us about replacement parts or matching burners for an existing lab. The company profile has further details.

Related Laboratory Equipment

What you typically need alongside a natural gas burner:

• Burner Tubing — flexible, rubber-covered gas line to the tap.
• Gas Lighter, Piezo Electric — lights the burner without matches.
• Tripod Stand 200mm — supports glassware over the flame.
• Gauze Wire — spreads the heat under the vessel.
• Burner, High-Temperature Natural Gas — a Meker-type option when a hotter flame is needed.

All burner types are listed on the Burners category page.

Frequently Asked Questions

How are the gas and air adjusted on the Natural Gas Burner?
On the Natural Gas Burner (SLE/B/12), gas is set with the needle valve and air is set by turning the heavy-gauge mixing tube, which is threaded into the base. The two controls together let the user move from a gentle flame to a hot blue cone.

Can the Natural Gas Burner run on LPG instead?
The Natural Gas Burner is offered for natural gas. If your laboratory uses LPG, contact us through the contact page before ordering so we can advise on a suitable burner for that supply.

Why does the Natural Gas Burner have a die-cast zinc alloy base?
The heavy die-cast zinc alloy base gives the Natural Gas Burner weight and durability. Together with the needle valve, it minimises the chance of the burner tipping while students set the flame.

Is gas tubing included with the Natural Gas Burner?
Tubing is not listed as part of the Natural Gas Burner. Add Burner Tubing in the length your bench needs to the same enquiry, so the burner and its gas line can be quoted and delivered together.

Is the Natural Gas Burner hot enough for crucible ignitions?
The Natural Gas Burner is a general-purpose burner for everyday heating. For sustained very hot work such as crucible ignitions, a Meker-type or high-temperature burner from the same category is the better choice.

Who manufactures the Natural Gas Burner?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Natural Gas Burner. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to buyers in India and international markets.

What should I include when asking for a quotation?
For the Natural Gas Burner, send the quantity, any accessories such as tubing or tripods, and the delivery location through the contact page. Those details let us prepare a complete quotation for the whole heating set-up.

Request a Quote

For Natural Gas Burner pricing, please contact us or add it to your enquiry cart. Every quotation is issued by the manufacturer itself.

Last updated: 24 September 2026

Cylindrical Cow Magnet (Product Code: SLE/MG/07) is an extra-strong, highly polished cylindrical metal magnet used as a compact strong-field demonstration magnet in physics classrooms and labs. It measures 1/2 inch in diameter and 3 inches long, and the design was originally used to protect a cow's stomach from metal, which gives students a memorable real-world example of magnetism. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, alongside other physics lab equipment for schools in India.

Specifications

What Is a Cow Magnet Used For?

Cow magnets come from farming, where cattle can pick up stray wire or nails while grazing; this type of magnet was originally used to protect a cow's stomach from such metal. In the classroom, that story makes a good opening question about which materials a magnet attracts and why the shape suits the job. The smooth, rounded cylinder then serves as a strong hand-held magnet for lifting chains of paper clips, testing unknown materials and comparing field strength with ordinary bar magnets.

Because the magnet is strong and compact, it also works well under paper sprinkled with iron filings, where the pattern forms tightly around the two ends. The polished surface wipes clean after use; store it away from phones, cards and other magnets, and keep it out of reach of young children.

Supplier

The Cylindrical Cow Magnet is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name in Ambala, Haryana, India. It sources this item for schools, colleges and science centres that want a sturdy strong-field magnet with an interesting back-story.

Single pieces, class quantities and mixed orders with other magnets can be quoted together. Find out more about the company on our company profile.

Related Magnets

Other strong magnets and field-viewing items for the same lessons:

• Neodymium Magnets — rare-earth magnets for comparing strength.
• Bar Magnets, Unpainted — stamped-pole bar magnets as a standard for comparison.
• Iron Filling — for showing the field pattern around the cylinder.
• Magnetic Field Demonstrator — field lines without loose filings.

Browse all teaching magnets in the Magnets category.

Frequently Asked Questions

What size is the Cylindrical Cow Magnet?
The Cylindrical Cow Magnet (SLE/MG/07) is 1/2 inch in diameter and 3 inches long. This compact, rounded shape makes it easy for students to hold while lifting paper clips or testing which materials are attracted.

Why is it called a cow magnet?
The Cylindrical Cow Magnet takes its name from its original use: magnets of this kind were used to protect a cow's stomach from metal picked up while grazing. Teachers use the story to link magnetism to a practical, real-world problem.

What is the Cylindrical Cow Magnet made of?
The Cylindrical Cow Magnet is described as a metal magnet with a highly polished finish. For the exact magnet alloy of the current stock, please ask through our contact page before you order.

How strong is the Cylindrical Cow Magnet?
The Cylindrical Cow Magnet is an extra-strong magnet for its compact size. A measured field value is not listed on this page, so if your experiment needs a specific strength, contact us and we will advise before quoting.

Who supplies the Cylindrical Cow Magnet?
The Cylindrical Cow Magnet (SLE/MG/07) is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, colleges, science centres and dealers in India and international markets.

Request a Quote

For a quotation on the Cylindrical Cow Magnet, write to us through the contact page or add it to the enquiry cart with the quantity you need.

Last updated: 24 September 2026

Adjustable Bunsen Burner (Product Code: SLE/B/13) is a laboratory gas burner used where a repeatable, finely set flame is needed, with separate controls for gas and air. A brass threaded needle valve with a rubber O-ring regulates the gas, air vents regulate the air, and a flame retainer at the top keeps the flame seated on the tube. It sits on a one-piece die-cast heavy base with a riffled nozzle and is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Adjustable Bunsen Burner Used For?

Because gas and air are set independently, the same burner can hold a small, quiet flame for gently warming an indicator solution and then open up to a hot blue cone for boiling or bending glass. The flame retainer helps stop the flame lifting off the tube at higher gas settings, which makes the burner more forgiving in draughty rooms and during quick changes of flame size. College, school and quality-control labs value that repeatability.

Place it beneath a tripod and gauze, or under a flask clamped to a retort stand for distillation and reflux set-ups. Push the burner tubing well over the riffled nozzle, set the needle valve before lighting, and let the burner cool before moving it by the base. As a piece of science apparatus from an Indian manufacturer, it suits both teaching benches and routine college work.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this adjustable burner. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and supplies it factory-direct to schools, colleges, quality-control labs, dealers and importers. Because the maker handles enquiries itself, requests for seals, spare parts or repeat batches can simply be sent to us. Background on the company is on our company profile.

Related Laboratory Equipment

Supporting items for experiments run on this burner:

• Burner Tubing — connects the riffled nozzle to the gas supply.
• Gas Lighter, Piezo Electric — lights the gas once the needle valve is open.
• Retort Stand — holds flasks and condensers above the flame.
• Gauze Wire, Ceramic Centre — even heating under beakers on a tripod.
• Flame Test Of Chemicals Lab Investigation — a class activity that relies on a controllable burner flame.

Other burner designs are available in the Burners category.

Frequently Asked Questions

What makes the Adjustable Bunsen Burner adjustable?
Both inlets of the Adjustable Bunsen Burner (SLE/B/13) can be set: gas through the brass threaded needle valve and air through the air vents. Flame size and flame temperature can therefore be adjusted separately for each task.

What does the flame retainer on the Adjustable Bunsen Burner do?
The flame retainer sits at the top of the Adjustable Bunsen Burner tube and helps keep the flame anchored there. It reduces the chance of the flame lifting off or going out at higher gas flow or in a draughty room.

Why is there a rubber O-ring on the needle valve?
On the Adjustable Bunsen Burner, the rubber O-ring works with the brass threaded needle valve to seal the gas regulation, so gas is metered through the valve rather than escaping around the thread. If a seal ever needs replacing, ask us.

Will standard burner tubing fit the Adjustable Bunsen Burner?
Yes. Push-on burner tubing grips the riffled nozzle of the Adjustable Bunsen Burner. Our Burner Tubing is offered in several lengths, so choose the one that reaches from the gas tap to the burner without stretching.

Is a calibration certificate available for this burner?
The Adjustable Bunsen Burner is a heating appliance rather than a measuring instrument, so it is not calibrated. If your purchasing process asks for particular documents, discuss them with us through the contact page when you request a quotation.

Who manufactures the Adjustable Bunsen Burner?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Adjustable Bunsen Burner. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and bulk or export orders are quoted directly by the manufacturer.

Request a Quote

Ask for a quotation on the Adjustable Bunsen Burner through the contact page, or collect it with other items in the enquiry cart. Include quantity, gas type and destination, and the manufacturer will reply directly.

Last updated: 24 September 2026

Magnets, Ring (Product Code: SLE/MG/08) is a pack of ceramic ring magnets used to build floating-magnet sets that demonstrate magnetic repulsion in school physics lessons. Each pack holds 16 rings, and every ring is 27 mm in diameter and 5 mm thick with a 10 mm centre hole, so the magnets slide easily onto a rod or pencil. The pack is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a school laboratory equipment supplier in India.

Specifications

What Are Ring Magnets Used For?

The classic use is the floating-magnet stack. Thread several rings onto an upright rod or a pencil with like poles facing each other, and each ring hovers above the one below it because the repulsion balances its weight. Students can press the uppermost ring down and feel it spring back, count how the gaps shrink towards the bottom of the stack, and flip one ring over to see it snap onto its neighbour when unlike poles meet.

With 16 rings in a pack, a teacher can build several stacks for group work or keep spares for rings that chip. Ceramic magnets are brittle, so let rings meet gently instead of snapping them together, and store them in a stack with a spacer. The 10 mm hole also makes the rings useful for simple motor and generator models.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, India, supplies these ceramic ring magnets to schools, colleges, dealers and kit builders. For vendor registration, the supplying company's GSTIN is 06AAECJ8618A1ZT and its LEI is 3358004HRD1JIVXKYX49.

Single packs and larger quantities can be quoted together with rods, stands or other magnetism items. Company details are on our company profile.

Related Magnets

Products that go with ring magnets in repulsion experiments:

• Floating Magnets – Coloured — a ready-made set of ceramic rings on a wooden pole.
• Super Floating Magnets Set — a floating-magnet set for repulsion demonstrations.
• Magnetic Repulsion — for measuring repulsive force against separation.
• Magnetic Activity Kit — ferrite magnets with a rod, caps and washers for levitation activities.

See the Magnets category for more magnet shapes and sets.

Frequently Asked Questions

How many ring magnets are in one pack of Magnets, Ring?
One pack of Magnets, Ring (SLE/MG/08) contains 16 ceramic ring magnets. That is enough to build several floating-magnet stacks for group work, or one tall stack with spare rings kept aside.

What size are the ceramic ring magnets?
Each magnet in the Magnets, Ring pack measures 27 mm in outer diameter and 5 mm thick, with a 10 mm hole in the centre. The hole lets the rings slide onto a rod or pencil for floating-magnet demonstrations.

How do ring magnets show magnetic repulsion?
When Magnets, Ring are stacked on a rod with like poles facing, each ring floats above the next because repulsion balances gravity. Turning one ring over makes it attract its neighbour instead, showing both effects with the same magnets.

Is a rod or stand included with the ring magnets?
No rod or stand is listed with the Magnets, Ring pack, which is sold as 16 loose ceramic rings. If you need a stand or a complete floating set, ask through our contact page and we will quote suitable items.

Who supplies the Magnets, Ring pack?
The Magnets, Ring pack (SLE/MG/08) is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, colleges, dealers and importers in India and international markets.

Request a Quote

Ask for a quotation on Magnets, Ring through the contact page, stating the number of packs, or add the item to the enquiry cart.

Last updated: 24 September 2026

Burner With Flame Stabilizer (Product Code: SLE/B/14) is a laboratory gas burner used when a steady flame is needed in draughts, at low settings or during aseptic work. Its stabilizer top lets part of the gas emerge at low velocity through an annular ring, which burns as a pilot around the principal flame and steadies it, while a needle valve controls gas flow for easy adjustment. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Burner With Flame Stabilizer Used For?

A steady flame matters whenever the burner is left running beside the work: near an open window or fan, under a fume cupboard's airflow, or at a low setting kept on standby between steps. The pilot ring anchors the main flame, which helps keep heating even when the air around the burner is moving. Teachers also find a quiet, well-defined flame easier for a class to watch during demonstrations.

In microbiology lab work in India and elsewhere, a steady burner flame is used for flaming loops and bottle necks during aseptic transfers. Set the needle valve for the size of flame needed, keep the stabilizer ring free from spilled material, and turn off the gas at the tap when work is finished.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which sells under the ScienceLab name, is the OEM (original equipment manufacturer) of this stabilised-flame burner. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, not sourced from a trader, and supplied factory-direct to schools, colleges, microbiology labs, dealers and importers. Questions about spare parts or repeat orders go straight to the maker, so just ask us. Our company profile explains more about the business.

Related Burners

Accessories and alternatives for stabilised-flame heating:

• Flame Spreader — a top described as suited to burners with a flame stabilizer, giving a fishtail flame for glass working.
• Bunsen Burner with Flame Stabilizer — a square-base, tip-resistant alternative.
• Burner Tubing — the gas line from tap to burner.
• Flame Test Of Chemicals Lab Investigation — a class activity where a steady flame helps observation.
• Crucible Tong — for handling hot crucibles and dishes.

See more in the Burners category.

Frequently Asked Questions

How does the flame stabilizer on this burner work?
On the Burner With Flame Stabilizer, some of the gas leaves the top at low velocity through an annular ring. This burns as a pilot flame around the principal flame, keeping it anchored to the burner top and steady even when the air around it moves.

When is the Burner With Flame Stabilizer better than a plain Bunsen burner?
The Burner With Flame Stabilizer is the better choice in draughts, at low flame settings and whenever a burner is left running between steps, situations in which a plain burner flame may lift off the tube or go out.

How is the flame size set on the Burner With Flame Stabilizer?
The flame size on the Burner With Flame Stabilizer (SLE/B/14) is set with its needle valve, which controls the gas flow for easy adjustment. Open it gradually after lighting until the flame reaches the size the task needs.

Does the Flame Spreader fit the Burner With Flame Stabilizer?
Our Flame Spreader is described as suited to burners with a flame stabilizer. Contact us through the contact page to confirm the fit with the Burner With Flame Stabilizer before ordering both items together.

How should the stabilizer top be cleaned?
Once the Burner With Flame Stabilizer has cooled, brush away soot or spilled material so the annular ring stays open. A blocked ring weakens the pilot effect, so check it before each practical session.

Which gas does the Burner With Flame Stabilizer use?
The gas type is not stated in our product details for the Burner With Flame Stabilizer. Tell us whether your laboratory uses natural gas or LPG when you enquire, so we can confirm the correct set-up before dispatch.

Who manufactures the Burner With Flame Stabilizer?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Burner With Flame Stabilizer. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and quotations for India and international markets come directly from the manufacturer.

Request a Quote

For prices on the Burner With Flame Stabilizer, send us an enquiry through the contact page or add it to the enquiry cart with the quantity, gas type and delivery location. The manufacturer quotes directly.

Last updated: 24 September 2026

Magnet Set (Product Code: SLE/MG/09) is a comparison set of bar and horseshoe magnets used to investigate and rank magnet strength in school science lessons. Alongside the magnets it holds a vial of iron filings for seeing magnetic fields and a vial of steel pieces for testing how much each magnet can pick up. The set is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as one of its science kits for students in India.

Key Details

What Is the Magnet Set Used For?

This set turns a vague idea, that some magnets are stronger than others, into a fair test students can run themselves. Each group dips a magnet into the steel pieces, counts how many it lifts, and records the result; repeating this for the bar magnet, the short horseshoe and the long horseshoe gives a clear ranking. Pupils can then discuss what makes the difference: the shape that brings the poles together, and the size of the magnet.

The iron filings add the visual side. Sprinkled on a sheet of paper over each magnet, they show why the horseshoe concentrates its pull between the poles while the bar spreads its field around both ends. Pour the filings back into their vial straight after use and keep them away from the magnet faces, since filings stuck to a magnet are hard to remove.

OEM Manufacturer

ScienceLab is the brand of Jain Scientific Equipments Private Limited, the original equipment manufacturer of this Magnet Set. The company produces its magnetism teaching range at its own licensed factory at Saha, Ambala, Haryana, India, and supplies schools, education departments, dealers and importers factory-direct.

Ask us if you need extra vials of steel pieces or iron filings for sets already in use, or matching sets for additional classrooms. Learn more on our company profile.

Related Magnets

Items that support magnet-strength investigations:

• Magnet Set of 4 — alnico bar magnets and two horseshoe sizes with stated dimensions.
• Steel Horseshoe Magnet — horseshoe magnets in three lengths for extended comparisons.
• Iron Filling — a larger jar of filings for refilling the vial.
• Materials Collection for Magnetism Studies — samples for sorting magnetic and non-magnetic materials.

All magnets and magnet kits are grouped in the Magnets category.

Frequently Asked Questions

What does the Magnet Set contain?
The Magnet Set (SLE/MG/09) contains bar and horseshoe magnets for strength comparison, including a short and a long horseshoe, plus a vial of iron filings to visualise magnetic fields and a vial of steel pieces to compare strength. Ask us for the exact magnet count.

How do students compare magnet strength with this set?
With the Magnet Set, students lower each magnet into the vial of steel pieces and count how many it lifts. Comparing the bar magnet with the horseshoe, and the short horseshoe with the long one, gives a simple, repeatable strength ranking.

What are the iron filings in the Magnet Set for?
The vial of iron filings in the Magnet Set is for making magnetic fields visible. Sprinkled on paper placed over a magnet, the filings line up along the field, showing the different patterns of the bar and horseshoe magnets.

Who manufactures the Magnet Set?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM manufacturer of the Magnet Set (SLE/MG/09), making it at its own licensed factory at Saha, Ambala, Haryana, India, and supplying schools, dealers and importers without a middleman.

Can the Magnet Set be ordered for many classrooms or for export?
Yes, the Magnet Set can be quoted in class and multi-school quantities, for tenders and dealers, and for export to international markets. Send the number of sets and delivery location through our contact page.

Request a Quote

The manufacturer quotes the Magnet Set directly. Reach us through the contact page or add the set to the enquiry cart with other magnetism items.

Last updated: 24 September 2026