- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Retort Metalware Kit
Retort Metalware Kit (Product Code: SLE/LR/19) is a class set of retort stand metalware used to equip student work stations for basic chemistry experiments in schools and colleges. It contains five heavy-duty 200 × 125 mm retort bases, five 600 mm steel retort rods, five die cast retort clamps and five PVC coated retort clamps, so the set divides evenly into five stations, each with a base, a rod and two clamps. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a ready chemistry teaching kit for Indian schools.
Specifications
| Parameter | Detail |
|---|---|
| Type | Class set of retort metalware |
| Purpose | Essential metalware to start a basic chemistry experiment |
| Retort bases | 5 × heavy duty, 200 × 125 mm |
| Retort rods | 5 × steel, 600 mm long |
| Die cast retort clamps | 5 |
| PVC coated retort clamps | 5 |
| Product code | SLE/LR/19 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Retort Metalware Kit Used For?
Most first chemistry practicals need something held above the bench: a funnel over a beaker for filtration, a boiling tube over a burner, a delivery tube feeding a gas jar, or a condenser in a simple distillation. This kit gives a teacher enough bases, rods and clamps to run the same experiment at five stations at once, instead of sharing one stand around the room.
The two clamp types have different jobs. The die cast clamps give a firm, rigid grip for heavier items, while the PVC coated clamps cushion glass so test tubes and flasks are less likely to slip or crack. Set the bases on a flat bench, keep loads above the base, and count the pieces back in after class so every station stays complete.
What to Specify When Ordering
- The number of kits (each kit covers five stations).
- Any extra clamps, bossheads or retort rings needed for particular experiments.
- The delivery location, in India or abroad.
OEM Manufacturer
The Retort Metalware Kit is assembled by Jain Scientific Equipments Private Limited, trading as ScienceLab, which is the OEM (original equipment manufacturer) and makes it at its own licensed factory at Saha, Ambala, Haryana, India. The company is registered as an MSME manufacturer under Udyam number UDYAM-HR-01-0003714, and ships kits abroad under Importer-Exporter Code AAECJ8618A issued by the DGFT.
If a piece goes missing or is damaged, ask us about a replacement for that part. More information is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Add-ons that extend what the kit can do:
- Retort Rings — hold a funnel or a gauze on the rod.
- Retort Clamp 3 Prongs — an extra clamp for round flasks and condensers.
- Bosshead — for fixing additional clamps or rings to a rod.
- Gauze Wire — spreads the flame under glassware heated on a ring.
Browse the Stand Bases, Rods and Rings category and the Retort Clamp category.
Frequently Asked Questions
What is included in the Retort Metalware Kit?
The Retort Metalware Kit includes five heavy-duty retort bases of 200 × 125 mm, five steel retort rods 600 mm long, five die cast retort clamps and five PVC coated retort clamps, twenty pieces in all.
How many students can use one Retort Metalware Kit?
One Retort Metalware Kit equips five work stations, each with a base, a rod and two clamps. Larger classes simply order more kits, or add loose clamps and rods from our range.
Why does the kit contain two types of clamp?
The Retort Metalware Kit mixes die cast clamps, which grip heavier apparatus firmly, with PVC coated clamps, which cushion glassware such as test tubes and small flasks, so each station can hold both kinds of item.
Can extra parts be ordered with the Retort Metalware Kit?
Yes. Extra clamps, bossheads, retort rings or replacement rods and bases can be quoted alongside the Retort Metalware Kit. List what you need on the contact page.
Who manufactures the Retort Metalware Kit?
The Retort Metalware Kit is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is sold factory-direct to schools, colleges and dealers.
Is the Retort Metalware Kit available for bulk school orders or export?
Yes. The Retort Metalware Kit is supplied in bulk to schools and dealers in India and international markets. Give the number of kits and the delivery destination for a quotation.
Request a Quote
To buy class sets, contact us through the contact page or add the kit to the enquiry cart. Quotes come direct from the manufacturer.
Last updated: 24 September 2026
