- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Table Clamp For Rods
Table Clamp For Rods (Product Code: SLE/LR/08) is a tempered cast iron clamp used to fix a support rod directly to the edge of a laboratory bench or table instead of standing it in a base. It fits table tops up to a maximum thickness of 55 mm and is listed for rods of D/Ø 12/13, so it frees bench space in school, college and research labs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a space-saving piece of chemistry lab equipment for India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Table (bench-edge) clamp for support rods |
| Material | Tempered cast iron |
| Table top thickness | Up to 55 mm maximum |
| Rod size (D/Ø, as listed) | 12/13 |
| Product code | SLE/LR/08 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the Table Clamp for Rods Used For?
Clamping a rod to the table borrows the weight of the whole bench, so a tall rod stays steady even when a base would start to tip. That suits long set-ups such as distillation columns, pendulums and demonstration apparatus that must hang well above the work surface. It also keeps the bench area under the rod completely free, which helps on narrow student benches where a stand base would take up room.
Before ordering, measure your table top: the clamp takes edges up to 55 mm thick. Place a thin pad between the jaws and a delicate or laminated surface, tighten firmly without forcing, and check the rod is vertical before loading glassware. Tempered cast iron is heat-treated to reduce the brittleness of ordinary cast iron, so it tolerates regular tightening in a busy chemistry lab.
What to Specify When Ordering
- The thickness of your bench or table top (the clamp takes up to 55 mm).
- The rod diameter you use; the clamp is listed for D/Ø 12/13.
- The number of clamps per lab.
- Whether matching rods should be quoted with them.
OEM Manufacturer
ScienceLab is the brand of Jain Scientific Equipments Private Limited, which makes the Table Clamp For Rods as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Institutions and dealers ordering bench fittings get them direct from the factory, not through a reseller.
For replacement clamps or to extend an existing lab, ask us for a quotation from the manufacturer. Company information is on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Pieces that work with a table clamp in the same set-up:
- Rods For Stand Bases — unthreaded 18/10 stainless rods, listed in 12 and 13 D/Ø sizes.
- Universal Clamp — for gripping flasks and tubes once the rod is fixed.
- Stand Bases Steel Varnished — a free-standing base for tables whose edge cannot be clamped.
- Sockets For Rods Without Thread — another way to give an unthreaded rod a fixed seat.
More options are in the Stand Bases, Rods and Rings category.
Frequently Asked Questions
How thick a table top will the Table Clamp For Rods fit?
The Table Clamp For Rods fits table and bench tops up to a maximum thickness of 55 mm. Measure the edge where you plan to fix it; thicker tops need a stand base or another mounting method instead.
Which rod size does the Table Clamp For Rods take?
The Table Clamp For Rods is listed for rods of D/Ø 12/13, the same sizes offered in our Rods For Stand Bases range. Tell us the rod you already use and the manufacturer will confirm the fit before you order.
What is the Table Clamp For Rods made of?
The Table Clamp For Rods is made of tempered cast iron. Tempering is a heat treatment that makes cast iron less brittle, which helps a clamp that is tightened and released many times during practical classes.
When is a table clamp better than a stand base?
A Table Clamp For Rods is the better choice for tall or top-heavy set-ups and for narrow benches, because the table carries the load and no floor area of the bench is used. For movable set-ups, a stand base is easier.
Who manufactures the Table Clamp For Rods?
The Table Clamp For Rods is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India, and is sold factory-direct to institutions and dealers.
Can the Table Clamp For Rods be ordered in bulk or for export?
Yes. The Table Clamp For Rods is supplied in quantity to schools, colleges and dealers across India and international markets. Send the quantity, table thickness and rod size through the contact page for a quotation.
Request a Quote
Request pricing through our contact form or add the Table Clamp For Rods to the enquiry cart. The quote is prepared by the manufacturer itself.
Last updated: 24 September 2026
