Tripod Cast Iron Varnished Manufacturer,Supplier and Exporter in India

Tripod Cast Iron Varnished (Product Code: SLE/LR/03) is a three-legged, varnished cast iron stand base with a thread that takes a support rod, used to build retort stands for clamps, rings and glassware in school, college and research labs. It is listed in two sizes, length 105 at 1.2 kg and length 145 at 2.0 kg, and the rod is ordered separately. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Cast Iron Tripod Base Used For?

A base that stands on three legs touches the bench at only three points, so it sits firmly without rocking even when the work surface is not perfectly flat. That makes this tripod a steady foundation for a retort stand: screw a support rod into the thread, fit bossheads and clamps, and hold flasks, funnels or condensers above the bench. The open space between the legs also leaves room to place a burner, beaker or small hot plate close beneath the rod.

Choose the 2.0 kg size for taller rods and heavier glassware, and the 1.2 kg size for compact set-ups on student benches. Keep the load above the legs rather than reaching far outside them, and tighten the rod fully before use. Anyone looking for a tripod stand for the lab in India should note that this is a rod base, not a burner tripod for gauze. Cast iron is strong under load but can crack if dropped, so lift it with both hands.

What to Specify When Ordering

• The size: length 105 (1.2 kg) or length 145 (2.0 kg).
• The support rods to go with it, since the rod is ordered separately.
• Any bossheads, clamps or rings for the complete stand.
• Quantity and delivery location.

OEM Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM (original equipment manufacturer) of this cast iron tripod and makes it at its own licensed factory in Saha, Ambala, Haryana, India. Since the tripod and the rods it needs are both offered by the same manufacturer, a lab can order a complete stand in one enquiry and receive the quotation from the source.

For repeat orders or advice on matching fittings, ask us directly. The ScienceLab profile has more about the company.

Related Stand bases, Rods and Rings

Parts needed to turn the tripod into a working stand, plus alternative bases:

• Rods For Stand Bases — the rod that screws into the tripod, ordered separately.
• Bosshead Malleable Cast Iron Chromium Plated — fixes clamps and rings to the rod.
• Crucible Retort Ring — holds a crucible, funnel or gauze on the stand.
• Stand Bases Steel Varnished — rectangular steel bases in nine sizes.

See every base and fitting in the Stand bases, Rods and Rings category.

Frequently Asked Questions

Is a rod included with the Tripod Cast Iron Varnished?
No. The rod is ordered separately for the Tripod Cast Iron Varnished. The tripod has a thread for the rod, so add Rods For Stand Bases to your enquiry and both items can be quoted together.

What sizes is the Tripod Cast Iron Varnished available in?
The Tripod Cast Iron Varnished is listed in two sizes by length (A): 105, weighing 1.2 kg, and 145, weighing 2.0 kg. The heavier size suits taller rods and larger loads; exact dimensions are confirmed with your quotation.

Why choose a tripod base like the Tripod Cast Iron Varnished?
A tripod base like the Tripod Cast Iron Varnished rests on three points, so it sits without rocking even on a bench that is not perfectly flat, and the space between its legs leaves room for a burner or vessel close to the rod.

Is the Tripod Cast Iron Varnished a burner tripod?
No. The Tripod Cast Iron Varnished is a stand base with a thread for a support rod, used to build retort stands. If you need a tripod that holds gauze over a burner, ask us through the contact page and we will suggest a suitable item.

How should the Tripod Cast Iron Varnished be looked after?
Keep the Tripod Cast Iron Varnished dry and wipe spills off the varnish promptly. Cast iron is strong under load but can crack if dropped on a hard floor, so lift it with both hands and store it on a low shelf.

Who manufactures the Tripod Cast Iron Varnished?
The Tripod Cast Iron Varnished is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders are handled by the manufacturer itself.

Request a Quote

Request a price for the Tripod Cast Iron Varnished, together with its rods, on our contact page or through the enquiry cart. The quotation comes straight from the manufacturer.

Last updated: 24 September 2026