Water Bath

Electric Water Bath (Product Code: SLE/WB/01) is a round, aluminium-bodied water bath with concentric rings, used to heat beakers, flasks and evaporating dishes gently over hot water in school and college laboratories. It has a 1 kW heater with automatic cut-out and a constant level device, and measures 145 x 200 mm (height x diameter). It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory equipment supplier serving schools, colleges and dealers.

Specifications

What Is the Electric Water Bath Used For?

A ring-top water bath is a common way to warm or evaporate liquids without an open flame. Remove rings until the opening matches the vessel, rest a beaker, conical flask or evaporating dish on top, and the hot water and steam heat it evenly — useful for evaporating solutions towards crystallisation, warming test tubes for food tests, or gently melting low-melting solids in school chemistry lab equipment sets.

The constant level device helps keep the water at a steady height during longer heating runs, and the automatic cut-out adds protection for the 1 kW heater, but the bath should still be checked during use. Connect it through the supplied plug and 3-core cable to a properly earthed socket, keep the cable clear of the hot body, and empty and dry the bath after use to limit scale.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies this Electric Water Bath from Ambala, Haryana, India, to schools, colleges, laboratories and dealers. Quotations, repeat orders for extra benches and questions about spare rings or heaters are handled by the same ScienceLab team — ask us.

For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (GSTIN 06AAECJ8618A1ZT, LEI 3358004HRD1JIVXKYX49). Read more on the ScienceLab profile.

Related Water Bath

Other baths and accessories often chosen with this unit:

• Electric Water Bath, Double Walled (SCL-515/07) — another Electric Water Bath listing: a stirred bath with contact-thermometer control from ambient to 100 °C.
• Electric Water Bath Rectangular — a rectangular alternative for racks of tubes.
• Water Bath — another water bath option in the same range.
• Immersion Thermometer — for checking the water temperature while heating.
• Porcelain Dish (China Dish) — a typical evaporating vessel used on ring-top baths.

See every model in the Water Bath category.

Frequently Asked Questions

What are the dimensions of the Electric Water Bath SLE/WB/01?
The Electric Water Bath SLE/WB/01 measures 145 x 200 mm (height x diameter). Concentric rings on top let you reduce the opening to suit smaller beakers, flasks or evaporating dishes, so one bath serves several vessel sizes.

What heater does the Electric Water Bath SLE/WB/01 use?
The Electric Water Bath SLE/WB/01 has a 1 kW heater fitted with an automatic cut-out. It is supplied with a connector plug and 1 metre of 3-core cable, and should be connected only to a properly earthed socket.

What does the constant level device do?
The constant level device on the Electric Water Bath SLE/WB/01 helps maintain a steady water level during longer heating runs, which keeps vessels on the rings evenly heated. Check the level before each session and top up with clean water.

Does the Electric Water Bath SLE/WB/01 have a thermostat?
The listing for the Electric Water Bath SLE/WB/01 mentions a 1 kW heater with automatic cut-out and a constant level device, but no adjustable thermostat. If you need a set temperature, see the stirred, double-walled Electric Water Bath in the Related section below, or ask us for advice.

Who supplies the Electric Water Bath SLE/WB/01?
The Electric Water Bath SLE/WB/01 is supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, from Ambala, Haryana, India. Quotations, repeat orders and enquiries about spare rings or heaters are handled directly by the ScienceLab team.

Can I order the Electric Water Bath SLE/WB/01 in bulk or for export?
Yes. The Electric Water Bath SLE/WB/01 is supplied in quantity to schools, colleges, dealers and importers across India and international markets. Share the number of units and your destination on the contact page to receive a quotation.

Request a Quote

Get a quotation for the Electric Water Bath (SLE/WB/01) through the contact page or by adding it to the enquiry cart — the ScienceLab team in Ambala will reply with a quotation.

Last updated: 24 September 2026

Water Bath (Product Code: SLE/WB/02) is a hemispherical copper bath used to heat beakers, flasks and dishes gently over boiling water in school and college chemistry laboratories. Teachers choose it where a simple, flame-heated bath is wanted: it is made of thick copper sheet, with a set of concentric rings on top and 2 handles for lifting. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to schools, colleges and dealers.

Key Details

What Is the Copper Water Bath Used For?

A copper water bath is the traditional way to warm or evaporate a liquid without putting the glass straight into a flame. The bath is partly filled with water and heated from below, usually on a tripod stand and wire gauze over a Bunsen burner. Rings are lifted off until the opening suits the vessel, which then sits in the steam and hot water — ideal for evaporating a solution towards crystallisation, drying a precipitate in a china dish or keeping test tubes warm during food tests.

Copper spreads heat quickly and evenly, and the hemispherical form sits steadily on a tripod. Keep water in the bath at all times while heating, because a copper bath heated dry can be damaged. Use the 2 handles with heat-resistant gloves or a cloth, and empty and dry the bath after each practical so it stays in good order for the next class. It remains a staple item of chemistry lab equipment for schools in India.

Supplier

This copper Water Bath is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, from Ambala, Haryana, India. Schools, colleges, dealers and importers order it directly from ScienceLab, and repeat orders or questions about replacement rings are handled by the same team — ask us.

About the company: ScienceLab profile.

Related Laboratory Equipment

What you typically need to set up this bath on the bench:

• Bunsen Burner — the usual heat source under a copper bath.
• Tripod Stand 200mm — supports the bath above the burner; check the fit with us.
• Gauze Wire — spreads the flame under the bath.
• Porcelain Dish (China Dish) — a common evaporating vessel for the rings.
• Electric Water Bath — an electrically heated alternative where flames are not wanted.

Compare every model in the Water Bath category.

Frequently Asked Questions

What is the Water Bath SLE/WB/02 made of?
The Water Bath SLE/WB/02 is made of thick copper sheet in a hemispherical shape. It has a set of concentric rings on top to suit different vessel sizes, and 2 handles for lifting it on and off the heat.

How is the copper Water Bath heated?
The listing for the Water Bath SLE/WB/02 describes a copper vessel with no built-in heater, so it is heated from below — typically on a tripod stand with wire gauze over a Bunsen burner. Always keep water in the bath while it is on the flame.

What are the concentric rings for?
The concentric rings on the Water Bath SLE/WB/02 are removed one by one until the opening matches the beaker, flask or evaporating dish. The vessel then rests securely over the hot water and steam and is heated evenly.

What size is the Water Bath SLE/WB/02?
The listing for the Water Bath SLE/WB/02 does not give its diameter or capacity. Please ask for the current dimensions through the contact page so you can check it against your tripod stands and burners before ordering.

Who supplies the Water Bath SLE/WB/02?
The copper Water Bath SLE/WB/02 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. Orders, repeat purchases and questions about replacement rings for the Water Bath SLE/WB/02 go directly to the ScienceLab team.

Can schools order the Water Bath in class sets or for export?
Yes, the copper Water Bath SLE/WB/02 is supplied in quantity to schools, colleges, dealers and importers across India and international markets. State the number of baths and the delivery destination on the contact page for a quotation.

Request a Quote

Ask for a quotation for the Water Bath (SLE/WB/02) through the contact page or add it to the enquiry cart together with burners and stands. The quote comes directly from the ScienceLab team in Ambala.

Last updated: 24 September 2026

Electric Water Bath Rectangular (Product Code: SLE/WB/03) is an electrically heated, multi-hole water bath used to warm or evaporate the contents of several vessels at once in school, college and teaching laboratories. Its single-wall stainless steel chamber has 75 mm holes with concentric rings, heated by a 1 kW heater with a cut-out device. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory instruments supplier in India.

Specifications

What Is the Rectangular Electric Water Bath Used For?

When a whole practical group needs to heat samples at the same time, a multi-hole rectangular bath saves bench space and avoids a row of burners. Each 75 mm hole takes a beaker, flask or dish, and the concentric rings reduce the opening for smaller vessels, so several students can evaporate solutions, warm reagents in test tubes or keep samples hot side by side on one water bath in the lab.

The stainless steel chamber resists rusting from constant contact with hot water, and the tubules for the water level arrangement help keep the water topped up during a long session. Fill the bath before switching on, connect it through the supplied plug and 3-core cable to an earthed socket, and keep an eye on the level — the cut-out device protects the 1 kW heater but is not a substitute for supervision. Drain and wipe the chamber at the end of the day.

What to Specify When Ordering

• The number of baths for your laboratory benches.
• How many 75 mm holes you need — the listing does not state the hole count, so confirm the current layout with us.
• The plug type and mains supply used in your country, especially for export orders.
• Accessories such as thermometers or evaporating dishes to be quoted with the bath.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the Electric Water Bath Rectangular from Ambala, Haryana, India, to schools, colleges, teaching laboratories and dealers. The same ScienceLab team answers questions about rings, heaters and repeat orders for extra benches — ask us.

Read the ScienceLab profile for company details.

Related Laboratory Equipment

Useful additions and alternatives for heating work:

• Immersion Thermometer — checks the water temperature, as this bath has no thermostat listed.
• Porcelain Dish (China Dish) — an evaporating dish that sits on the rings.
• Electric Water Bath — a round, single-opening version for one vessel at a time.
• Serological Water Bath — a thermostatically controlled bath when a set temperature is needed.

See all models in the Water Bath category.

Frequently Asked Questions

What is the chamber of the Electric Water Bath Rectangular made of?
The Electric Water Bath Rectangular SLE/WB/03 has a single-wall chamber made of stainless steel. The top has 75 mm holes fitted with concentric rings, so vessels of different sizes can be placed over the hot water.

What heater does the Electric Water Bath Rectangular use?
The Electric Water Bath Rectangular uses a 1 kW heater with a cut-out device. It comes complete with a connector plug and 1 metre of 3-core cable, and should always be connected to a properly earthed socket.

How many holes does the rectangular water bath have?
The listing for the Electric Water Bath Rectangular SLE/WB/03 gives the hole size as 75 mm but not the number of holes. Ask us through the contact page and we will confirm the layout of the current model.

Can the temperature be set on the Electric Water Bath Rectangular?
No thermostat is mentioned for the Electric Water Bath Rectangular; its listing describes a 1 kW heater with a cut-out device. For work at a set temperature, consider the Serological Water Bath, or ask us for advice.

Who supplies the Electric Water Bath Rectangular?
The Electric Water Bath Rectangular SLE/WB/03 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. Quotations, repeat orders and questions about rings or the heater for this bath are handled directly by the ScienceLab team.

Do you supply the Electric Water Bath Rectangular in bulk or for export?
Yes, the Electric Water Bath Rectangular is supplied in quantity to schools, colleges, dealers and importers across India and international markets. Share the quantity, plug type and destination through the contact page for a quotation.

Request a Quote

Request a quotation for the Electric Water Bath Rectangular (SLE/WB/03) on the contact page or add it to the enquiry cart. Quotes are sent directly by the ScienceLab team in Ambala.

Last updated: 24 September 2026

Serological Water Bath (Product Code: SLE/WB/04) is a thermostatically controlled, double-walled water bath used to hold tubes, flasks and reagents at a steady set temperature in biology, microbiology and college laboratories. Its thermostat covers 5°C above room temperature to 95°C with an accuracy of ±0.5°C, and the stainless steel chamber is insulated inside a stove-enamelled case. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to teaching and testing laboratories.

Specifications

What Is the Serological Water Bath Used For?

Serology and general bioscience practicals often call for samples, sera or reagents to sit at one temperature for a set time — for agglutination and precipitation tests, enzyme experiments, thawing frozen material or pre-warming culture media before use. Water carries heat to every tube far more evenly than air, so this bath keeps a rack of tubes at matching temperature, which is why it is a routine piece of microbiology lab equipment in India.

Set the thermostat knob, allow the bath time to settle at the set temperature, and check the water with a separate thermometer before loading samples. The dome cover limits evaporation and heat loss, and the perforated shelves lift vessels off the floor of the chamber. As the bath is supplied without racks, plan tube racks separately. Use the drain plug to empty it regularly and refill with clean water to keep the chamber free of scale and growth.

What to Specify When Ordering

• The number of baths required.
• Tube racks to suit your tubes, since the bath comes without racks.
• Confirmation that your supply is 220–240 V, 50 Hz, as listed.
• The chamber size you need — the listing gives no capacity, so ask us for the current dimensions.

Supplier

The Serological Water Bath is supplied by Jain Scientific Equipments Private Limited, trading as ScienceLab, from Ambala, Haryana, India. The company sources the bath and supplies it directly to laboratories, dealers and importers; enquiries about thermostats, shelves or other replacement parts are handled by the ScienceLab team — ask us.

More on the ScienceLab profile.

Related Laboratory Equipment

Items commonly ordered with a serological bath:

• Water Bath Stainless Steel Test Tube Rack — a rack for holding tubes in a bath; confirm the fit with us.
• Test Tube Rack SS — a stainless steel tube rack for the bench.
• Laboratory Thermometer — for an independent check of the water temperature.
• Digital Serological Water Bath — the digital model with finer temperature accuracy.

Browse the Water Bath category for other models.

Frequently Asked Questions

What temperature range does the Serological Water Bath cover?
The Serological Water Bath SLE/WB/04 has thermostatic temperature control from 5°C above room temperature up to 95°C, with an accuracy of ±0.5°C. The temperature is set with a thermostat control knob on the bath.

How is the Serological Water Bath built?
The Serological Water Bath is double walled, with an inner chamber of stainless steel, an outer body of stove-enamelled mild steel and insulation in between. It has a stainless steel dome cover and perforated, removable shelves.

Are racks included with the Serological Water Bath?
No, the Serological Water Bath SLE/WB/04 is supplied without racks. It does include perforated, removable shelves; tube racks can be quoted separately, so tell us the tube size you use when you request a quotation.

What power supply does the Serological Water Bath need?
The Serological Water Bath works on 220–240 V, 50 Hz and comes with a connector plug and 1 metre of 3-core cable. The heater has an automatic cut-out, and the bath also has two indicator lights.

Who supplies the Serological Water Bath SLE/WB/04?
The Serological Water Bath SLE/WB/04 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. Quotations, repeat orders and questions about thermostats or shelves for this bath are handled directly by the ScienceLab team.

Can a calibration certificate be provided?
The Serological Water Bath listing states a thermostat accuracy of ±0.5°C but does not mention calibration paperwork. If your laboratory needs a calibration certificate, include this in your enquiry and we will discuss what can be arranged.

Request a Quote

For a quotation on the Serological Water Bath (SLE/WB/04), with or without racks, use the contact page or add it to the enquiry cart. ScienceLab quotes directly for Indian and export orders.

Last updated: 24 September 2026

Digital Serological Water Bath (Product Code: SLE/WB/05) is an unstirred laboratory water bath with a digital PID controller, used to keep samples, tubes and reagents at a precise temperature for general laboratory and serology work. It controls from 5°C above ambient to 99°C with an accuracy of ±0.1°C, in a seamless, corrosion-resistant stainless steel tank. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Digital Serological Water Bath Used For?

Serological tests, enzyme assays and many teaching experiments give reliable results only when samples are held at the right temperature, and a small drift can change reaction times. A digital water bath with PID control answers that need: the controller adjusts heating continuously to hold the set value, and the ±0.1°C accuracy means a group of tubes sits at practically the same temperature from start to finish.

Being unstirred, the bath has no pump or stirrer, which keeps it simple and quiet for routine incubation, thawing and warming jobs. Stand tubes or flasks on the perforated shelf, fit the stainless steel cover to cut evaporation and heat loss, and top up with clean water as needed. Wiping the painted case and tank regularly keeps this digital water bath for Indian laboratories presentable and easy to clean.

What to Specify When Ordering

• The tank capacity you need — the listing gives no volume, so ask us to confirm it.
• Your mains supply voltage and frequency.
• Tube racks, if your work needs more than the perforated shelf supplied.
• The number of units for your laboratory.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies the Digital Serological Water Bath to laboratories, institutions, dealers and importers from Ambala, Haryana, India. The company sources the unit, prepares the quotation and handles delivery, and can advise on accessories for your application — ask us.

For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). See the ScienceLab profile.

Related Laboratory Equipment

Alternatives and accessories for temperature-controlled work:

• Serological Water Bath — a thermostatic model with a dome cover, for work where ±0.5°C is sufficient.
• Digital Unstirred Water Bath — another PID-controlled unstirred bath with alarms and indicators.
• Water Bath Stainless Steel Test Tube Rack — for holding tubes upright in a bath; confirm the fit with us.
• Digital Thermometer — an independent check of the water temperature.

See the full Water Bath category.

Frequently Asked Questions

What temperature range and accuracy does the Digital Serological Water Bath offer?
The Digital Serological Water Bath SLE/WB/05 uses a digital PID controller to control temperature from 5°C above ambient to 99°C, with an accuracy of ±0.1°C. That suits work where samples must stay very close to the set value.

What is the tank made of?
The Digital Serological Water Bath has a high-quality, corrosion-resistant, seamless stainless steel tank with a bright clean finish, housed in a durable painted outer case. The painted surfaces have an anti-bacterial finish with good chemical resistance.

What comes with the Digital Serological Water Bath?
The Digital Serological Water Bath SLE/WB/05 includes a stainless steel cover and a perforated shelf. Tube racks are not listed as included, so mention the tubes you use when you ask for a quotation and we can suggest suitable racks.

What does “unstirred” mean for this water bath?
The Digital Serological Water Bath is an unstirred bath, meaning it has no stirrer or circulating pump moving the water. It relies on its PID-controlled heating and the tank design to hold temperature, and suits general laboratory use.

Who supplies the Digital Serological Water Bath?
The Digital Serological Water Bath SLE/WB/05 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to laboratories, institutions, dealers and importers across India and international markets.

Is a calibration certificate available?
The Digital Serological Water Bath listing gives an accuracy of ±0.1°C but does not mention calibration paperwork. If your laboratory requires a calibration certificate, state it in your enquiry and we will discuss the options with you.

Request a Quote

Send your requirement for the Digital Serological Water Bath (SLE/WB/05) through the contact page or add it to the enquiry cart, including the capacity and mains supply you need.

Last updated: 24 September 2026

Water Bath Kit for Hotplates (Product Code: SLE/WB/06) is a spare water bath kit for the Nanoheat hotplate, used to turn that hotplate into a water bath for gentle, even heating of samples in teaching and research laboratories. It suits labs that already own a Nanoheat hotplate and need a replacement or additional bath, as the hotplate itself is not supplied with this kit. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

What Is the Water Bath Kit for Hotplates Used For?

A hotplate on its own heats whatever sits on it from the bottom, which can scorch or crack a vessel and gives uneven temperatures. Adding a water bath between the hotplate and the samples spreads the heat through the water, so tubes, flasks and small beakers warm evenly and cannot rise above the temperature of the bath. That is useful for warming reagents, melting low-melting solids, thawing samples or keeping tubes at a steady temperature during a practical.

This kit is listed as a spare for the Nanoheat hotplate, so it is mainly a replacement or an extra bath for laboratories already using that hotplate, and a practical addition to hot plate lab set-ups in India. Always fill the bath with water before switching the hotplate on, and check the water temperature with a thermometer rather than relying on the hotplate dial alone.

What to Specify When Ordering

• The model of Nanoheat hotplate you use, so the kit can be matched to it.
• The number of spare kits needed.
• Whether you also need a thermometer for checking the bath temperature.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies the Water Bath Kit for Hotplates from Ambala, Haryana, India. Because the product image is representative of the range, contact us before ordering and we will confirm the exact kit contents and its match to your hotplate.

Export shipments are handled under Importer-Exporter Code AAECJ8618A (DGFT), and the supplying company’s GSTIN is 06AAECJ8618A1ZT. More on the ScienceLab profile.

Related Laboratory Equipment

Other ways to heat samples in water, plus a useful check:

• Electric Water Bath — a standalone bath with its own heater, if you do not have a hotplate.
• Digital Unstirred Water Bath — a self-contained bath with digital temperature control.
• Immersion Thermometer — for measuring the water temperature in the bath.

Compare options in the Water Bath category.

Frequently Asked Questions

Is a hotplate included with the Water Bath Kit for Hotplates?
No. The Water Bath Kit for Hotplates SLE/WB/06 is supplied without a hotplate. It is a spare water bath kit intended for use with a Nanoheat hotplate that you already have in your laboratory.

Which hotplate does the Water Bath Kit for Hotplates fit?
The Water Bath Kit for Hotplates is listed as a spare water bath kit for the Nanoheat hotplate. Tell us the model of your hotplate when you enquire, and we will confirm that the kit matches it before you order.

Does the photo show the exact kit?
The image of the Water Bath Kit for Hotplates is representative of the range, so the kit you receive may differ in appearance. Ask us through the contact page if you need the exact contents or dimensions confirmed.

What is the capacity of the Water Bath Kit for Hotplates?
The listing for the Water Bath Kit for Hotplates SLE/WB/06 does not state its capacity or dimensions. Please ask us for these details through the contact page, together with your hotplate model, before placing an order.

Who supplies the Water Bath Kit for Hotplates?
The Water Bath Kit for Hotplates SLE/WB/06 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to laboratories, institutions, dealers and importers in India and international markets.

Request a Quote

To order the Water Bath Kit for Hotplates (SLE/WB/06), send the quantity and your hotplate model through the contact page, or add it to the enquiry cart.

Last updated: 24 September 2026

Digital Unstirred Triple Water Bath (Product Code: SLE/WB/07) is a three-chamber digital water bath used to run three independently controlled temperatures side by side, for heating samples in micro tubes and other molecular biology work. Each shallow, low-profile chamber has its own digital thermostatic control from ambient +5°C to 99°C, and the tank capacity is listed as 3 x 2 litre. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Digital Unstirred Triple Water Bath Used For?

Many molecular biology protocols move samples through two or three temperatures in quick succession — for example a digestion step, an inactivation step and a warm hold. With three chambers each on its own controller, all three temperatures can be ready at once on one bench footprint, so micro tubes are simply lifted from one bath to the next instead of waiting for a single bath to heat or cool.

The shallow chambers need less water and less process chemicals, which makes them economical to run, and the low profile brings samples within easy reach. Keep the water between the 10 mm minimum and 30 mm maximum water levels, rest tube racks on the perforated shelf, and use the over-temperature alarm as a safeguard for sensitive samples. This makes the unit a practical digital water bath for Indian research and teaching laboratories.

What to Specify When Ordering

• Confirmation that your supply matches the listed 230 V / 50–60 Hz rating.
• The number of triple units required.
• Tube racks for your micro tube or test tube sizes, if needed on the shelves.

Supplier

The Digital Unstirred Triple Water Bath is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab, from Ambala, Haryana, India. The company sources the unit for universities, research institutes, dealers and importers, confirms the specification against your needs and arranges delivery — ask us for a quotation.

Find out more on the ScienceLab profile.

Related Laboratory Equipment

Consumables and alternative baths for the same work:

• Micro Centrifuge Tube, 1.5ml — the kind of micro tube this bath is suited to heating.
• Digital Unstirred Water Bath — a single-chamber digital bath with PID control.
• Unstirred Thermostatic Water Bath, 2.5 Litre — a single compact bath option.
• Digital Serological Water Bath — digital PID control with ±0.1°C accuracy.

More models are in the Water Bath category.

Frequently Asked Questions

Can each chamber of the Digital Unstirred Triple Water Bath run at a different temperature?
Yes. The Digital Unstirred Triple Water Bath SLE/WB/07 has three independently controlled unstirred baths in one unit, each with digital thermostatic control from ambient +5°C to 99°C, so three different set points can be used at once.

What is the capacity of the Digital Unstirred Triple Water Bath?
The specification of the Digital Unstirred Triple Water Bath lists a tank capacity of 3 x 2 litre, with internal dimensions of 300 x 150 x 65 mm and a water level between 10 mm and 30 mm. Confirm the capacity with us when you order.

How does the over-temperature alarm work?
On the Digital Unstirred Triple Water Bath, the over-temperature alarm is automatically set 4°C above the set point. It warns the user if the water rises beyond that margin, helping protect temperature-sensitive samples during a run.

What power does the Digital Unstirred Triple Water Bath need?
The Digital Unstirred Triple Water Bath SLE/WB/07 is rated at 230 V / 50–60 Hz, with heater power of 3 x 200 W at 220–240 V. Check that this matches your laboratory supply before ordering.

What applications is the Digital Unstirred Triple Water Bath suited to?
The Digital Unstirred Triple Water Bath is described as ideal for heating samples in micro tubes and for other molecular biology applications. Its shallow chambers use less water and less process chemicals, making it economical to use.

Who supplies the Digital Unstirred Triple Water Bath?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Digital Unstirred Triple Water Bath SLE/WB/07 to laboratories, institutions, dealers and importers across India and international markets.

Request a Quote

For a quotation on the Digital Unstirred Triple Water Bath (SLE/WB/07), use the contact page or add it to the enquiry cart with any tubes and racks you need.

Last updated: 24 September 2026

Digital Unstirred Water Bath (Product Code: SLE/WB/08) is a digitally controlled laboratory water bath used to provide a stable temperature environment for quality control, routine testing and teaching work. It combines PID temperature control with Smart adaptive control technology, a keypad and LED display, and a crevice-free 304 (18/8) stainless steel tank. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Digital Unstirred Water Bath Used For?

Quality control laboratories need to repeat the same test at the same temperature day after day, and small differences between runs can change results. This bath is built for that kind of routine: set the value on the keypad, and the PID controller with Smart adaptive control brings the water to temperature and holds it, while the display shows the actual measured temperature in real time rather than just the set point.

The over- and under-temperature indicators and auto alarm settings make it easy to spot when conditions drift, and the splash-proof controls suit a wet bench. Being unstirred, it has no stirrer in the water, so it works well for incubating sample tubes, warming media and holding reagents. For many buyers it is the everyday digital water bath in Indian testing laboratories. Use clean water and wipe the crevice-free stainless steel tank dry when not in use.

What to Specify When Ordering

• The tank capacity you need — the listing does not give a volume, so ask us to confirm it.
• Confirmation that your supply matches 230 V AC, 50–60 Hz.
• Any tube racks you need for your samples.
• Whether a calibration certificate is needed for your quality system.

Supplier

Jain Scientific Equipments Private Limited supplies the Digital Unstirred Water Bath under its ScienceLab name from Ambala, Haryana, India, to testing laboratories, colleges, dealers and importers. We source the bath, check your capacity and supply requirements before quoting, and arrange dispatch within India and abroad.

Buyers registering us as a vendor can use GSTIN 06AAECJ8618A1ZT; international consignments ship under Importer-Exporter Code AAECJ8618A issued by the DGFT. Visit the ScienceLab profile.

Related Laboratory Equipment

Other baths and accessories to compare:

• Digital Stirred Water Bath, 8 Litre — a stirred alternative when circulation is needed.
• Digital Unstirred Triple Water Bath — three independently controlled baths in one unit.
• Digital Serological Water Bath — another PID-controlled unstirred bath, with cover and shelf.
• Water Bath Stainless Steel Test Tube Rack — for holding tubes in the bath; confirm the fit with us.

See every model in the Water Bath category.

Frequently Asked Questions

What temperature performance does the Digital Unstirred Water Bath offer?
The Digital Unstirred Water Bath SLE/WB/08 works from ambient +5°C to 99°C, with temperature stability of ±0.2°C at 45°C and uniformity of ±0.1°C. The display shows the measured temperature in 0.1°C increments.

What alarms and indicators does it have?
The Digital Unstirred Water Bath features auto alarm settings, an illuminated on/off switch, and heater, over-temperature and under-temperature indicators. Together these show at a glance whether the bath is heating and whether it is holding the set temperature.

What is the tank of the Digital Unstirred Water Bath made of?
The tank and immersed components of the Digital Unstirred Water Bath SLE/WB/08 are 304 spec (18/8) stainless steel with a crevice-free construction, which makes the tank straightforward to clean and suitable for routine laboratory use.

What capacity is the Digital Unstirred Water Bath?
The listing for the Digital Unstirred Water Bath gives its temperature, control and power details but not the tank volume. Ask us through the contact page to confirm the capacity before you place an order.

Is the Digital Unstirred Water Bath calibrated?
The listing states that every Digital Unstirred Water Bath is calibrated with a measuring system. If your laboratory needs a calibration certificate for its records, mention this in your enquiry and we will confirm what documentation can be supplied.

Who supplies the Digital Unstirred Water Bath?
The Digital Unstirred Water Bath SLE/WB/08 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to laboratories, institutions, dealers and importers in India and international markets.

Request a Quote

Request a quotation for the Digital Unstirred Water Bath (SLE/WB/08) through the contact page or the enquiry cart, stating the capacity and any accessories you need.

Last updated: 24 September 2026

Heated Timed Ultrasonic Bath (Product Code: SLE/WB/09) is a compact benchtop ultrasonic bath with a heated 1 litre stainless steel tank, used to clean, degas and mix small items and samples in laboratories and workshops. Its 38 kHz ultrasound, 30–80°C heater and preset timer suit labs that clean small parts at the bench, and it switches itself off after 12 hours without key activity. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory instruments supplier in India.

Specifications

What Is the Heated Ultrasonic Bath Used For?

An ultrasonic bath passes high-frequency sound through water, forming tiny cavitation bubbles that collapse against submerged surfaces and lift dirt from threads, crevices and narrow bores that a brush cannot reach. Warming the water to between 30 and 80°C helps soften grease and residues. The degas function drives dissolved air out of freshly filled water, sweep evens out the cleaning action across the tank, and boost gives a short burst of extra power for stubborn deposits.

With a 1 litre tank, this model suits small loads: cuvettes, small glass parts, tool tips, jewellery-sized metal parts or a beaker of solution that needs degassing or dissolving. Place items in a beaker or holder instead of directly on the tank floor, keep the water at the working level and choose the shortest timer setting that does the job. For school and college laboratory instruments in India that need occasional precision cleaning, a small bath like this saves bench space.

What to Specify When Ordering

• Supply voltage: the 120 V or the 230 V version.
• Tank size: this 1 litre model, or one of the larger heated ultrasonic baths in this range for bigger loads.
• Number of units required and the delivery location (India or overseas).

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab and supplies this ultrasonic bath from Ambala, Haryana, to teaching, research and industrial laboratories in India and international markets. Tell us your mains voltage when you enquire so that the correct version is quoted. Company background is on the ScienceLab company profile.

Related Water Bath Equipment

These items are often ordered together with a small ultrasonic bath or considered as alternatives:

• Heated Timed Ultrasonic Bath, 45 Litre — a much larger tank with a drain tap for batch cleaning.
• Heated Timed Ultrasonic Bath, 90 Litre — the largest bath in this range for bulky items.
• Glass Beaker — holds small parts or solutions inside the bath.
• Beaker Brush — removes heavy residue before ultrasonic cleaning.

See all heating and cleaning baths in our Water Bath category.

Frequently Asked Questions

What size is the Heated Timed Ultrasonic Bath?
The Heated Timed Ultrasonic Bath holds 1 litre. Its internal tank measures 190 x 85 x 60 mm and the unit measures 200 x 100 x 180 mm overall, so it fits on a crowded bench. There is no drain tap, so the tank is emptied by pouring.

What ultrasonic frequency and power does the Heated Timed Ultrasonic Bath use?
The Heated Timed Ultrasonic Bath works at 38 kHz with 30 W effective ultrasonic power and 240 W peak power. A separate 60 W heater (220–240 V) warms the water between 30 and 80°C, set on an analogue dial in 5°C steps.

How long can the Heated Timed Ultrasonic Bath run?
The Heated Timed Ultrasonic Bath offers preset times from 1 to 30 minutes plus a 12-hour run setting, and it is designed for continuous operation. If no keys are pressed for 12 hours it switches off automatically, which prevents unintended running.

Which voltage versions of the Heated Timed Ultrasonic Bath are available?
The Heated Timed Ultrasonic Bath is listed in 120 V and 230 V versions. The frequency is given as 0–60 Hz, so please confirm your mains frequency with us before ordering and state the version you need on your enquiry.

Who supplies the Heated Timed Ultrasonic Bath?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the Heated Timed Ultrasonic Bath to laboratories, schools and colleges in India and international markets. Orders, spares questions and delivery are handled directly by the ScienceLab team.

Can I get a calibration certificate with the Heated Timed Ultrasonic Bath?
Calibration paperwork for the Heated Timed Ultrasonic Bath is not described in its listing, so please raise it when you enquire. Use the contact page to tell us what documentation your lab or auditor needs, and we will tell you what can be provided.

Request a Quote

Send the voltage and quantity you need through our contact page, or add the Heated Timed Ultrasonic Bath to the enquiry cart together with any related items, and we will reply with a quotation.

Last updated: 24 September 2026

Heated Timed Ultrasonic Bath, 45 Litre (Product Code: SLE/WB/10) is a large, heated ultrasonic cleaning tank used to clean whole batches of labware, components and tools in laboratories, workshops and technical institutes. With 400 W effective ultrasonic power, a 1600 W heater and a drain tap, it is built for demanding applications and continuous operation. This analytical lab instrument is supplied in India by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the 45 Litre Ultrasonic Bath Used For?

A 45 litre tank with a 500 x 300 mm opening and 300 mm depth takes full baskets of glassware, sieves, moulds, machine parts or instrument components in one cycle, which is why workshops, engineering labs and busy teaching labs choose this size. Ultrasound at 38 kHz creates cavitation that reaches blind holes and textured surfaces, while heating the liquid up to 80°C loosens oils, waxes and dried deposits faster than cold water.

Fill the tank before switching on, run the degas setting on fresh liquid, then use sweep or boost according to the soiling. Keep parts in a basket so they do not rest on the tank floor, and use the drain tap to empty used liquid without lifting the bath. As laboratory equipment in India that will run for long shifts, this model is built for continuous work, and the 12-hour auto switch-off covers the case where someone forgets to turn it off.

What to Specify When Ordering

• Confirm a 230 V, 50–60 Hz supply at the installation point.
• Choose the tank size: 45 litre here, the 1 litre bench model, or the larger version in this range.
• State the number of baths and where they must be delivered.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies this 45 litre ultrasonic bath from Ambala, Haryana, to institutes, industrial users and dealers across India and international markets. Because a bath of this size is heavy and bulky, share your delivery address and site access when you enquire so that freight can be planned. Read more on the company profile page.

Related Water Bath Equipment

Buyers of a large ultrasonic bath often compare or add these items:

• Heated Timed Ultrasonic Bath, 90 Litre — double the volume and 800 W effective power.
• Heated Timed Ultrasonic Bath — the 1 litre bench model for small parts.
• Polyprop Test Tube Basket — keeps tubes and small glassware together during cleaning.
• Beaker Brush — for manual pre-cleaning of heavy deposits.

Browse the full Water Bath category for heating and cleaning baths.

Frequently Asked Questions

How big is the tank of the Heated Timed Ultrasonic Bath, 45 Litre?
The Heated Timed Ultrasonic Bath, 45 Litre has an internal tank of 500 x 300 x 300 mm (W x D x H) and external dimensions of 615 x 370 x 467 mm. Plan bench space and floor loading for the filled weight before it arrives.

How powerful is the Heated Timed Ultrasonic Bath, 45 Litre?
The Heated Timed Ultrasonic Bath, 45 Litre delivers 400 W effective ultrasonic power, 1600 W peak power at 38 kHz, and has a 1600 W heater. The water can be set between 30 and 80°C on an analogue dial in 5°C increments.

Does the Heated Timed Ultrasonic Bath, 45 Litre have a drain tap?
Yes, the Heated Timed Ultrasonic Bath, 45 Litre has a drain tap, so used cleaning liquid can be run off into a container or sink without tipping the tank. This makes regular liquid changes practical in a busy lab or workshop.

What power supply does the Heated Timed Ultrasonic Bath, 45 Litre need?
The Heated Timed Ultrasonic Bath, 45 Litre is listed as a 230 V model for 50–60 Hz mains. Make sure the socket and wiring suit the combined load of the 1600 W heater and ultrasonic generator; ask us if your site uses a different supply.

Who supplies the Heated Timed Ultrasonic Bath, 45 Litre?
The Heated Timed Ultrasonic Bath, 45 Litre is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) from Ambala, Haryana, India. The company handles enquiries, quotations, packing and dispatch for customers in India and international markets.

What should a quotation request for the Heated Timed Ultrasonic Bath, 45 Litre include?
For the Heated Timed Ultrasonic Bath, 45 Litre, include the quantity, your supply voltage, the delivery city or port and any documents your purchase process needs. Send these details through the contact page for an accurate reply.

Request a Quote

Ask for pricing through our contact page, or place the Heated Timed Ultrasonic Bath, 45 Litre in the enquiry cart with any other laboratory items you need.

Last updated: 24 September 2026

Heated Timed Ultrasonic Bath, 90 Litre (Product Code: SLE/WB/11) is a large-capacity heated ultrasonic tank used to clean bulky or numerous parts in shared laboratories, engineering workshops and maintenance departments. Its 600 x 500 x 300 mm tank, 800 W effective ultrasonic power and 2000 W heater make it the largest bath in this range, with a drain tap for easy emptying. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its laboratory equipment supply in India.

Specifications

What Is the 90 Litre Ultrasonic Bath Used For?

The 90 litre bath is sized for items that simply will not fit a smaller tank: long trays, large sieve stacks, moulds, instrument housings, engine or pump parts and full racks of glassware. A central wash station of this size lets several lab groups or a maintenance team clean in one place, and its 3200 W peak ultrasonic output is matched to the large 600 x 500 mm tank.

Position the bath near a drain so the tap can empty spent liquid, fill it before switching on and let the 2000 W heater bring the liquid to temperature before loading parts. Suspend work in baskets or on hooks rather than on the tank floor. For analytical and engineering lab instruments in India that face heavy, repeated use, this continuous-duty design is the practical choice.

What to Specify When Ordering

• Check that the site has a 230 V, 50–60 Hz supply rated for the heater and ultrasonic load.
• Confirm that 715 x 570 x 467 mm of floor or bench space is available, plus room around the drain tap.
• Decide whether the 90 litre size is needed, or whether a smaller bath from this range covers your largest items.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies the 90 litre ultrasonic bath from Ambala, Haryana, to engineering colleges, industrial laboratories, institutions and importers in India and international markets. For a bath of this size, share your delivery city or port so that freight can be included in the quotation. See the ScienceLab profile for more about the company.

Related Water Bath Equipment

These products sit in the same cleaning and heating workflow:

• Heated Timed Ultrasonic Bath, 45 Litre — half the volume for medium batches.
• Heated Timed Ultrasonic Bath — a 1 litre bench unit for small parts beside the main station.
• Polyprop Test Tube Basket — carries tubes and small glassware in and out of the tank.
• Immersion Thermometer — lets you cross-check the liquid temperature.

More baths are listed in the Water Bath category.

Frequently Asked Questions

What fits inside the Heated Timed Ultrasonic Bath, 90 Litre?
The Heated Timed Ultrasonic Bath, 90 Litre has a 600 x 500 x 300 mm internal tank, so items up to roughly that footprint and depth can be fully immersed. Allow some clearance around parts so cavitation reaches every surface.

How much ultrasonic power does the Heated Timed Ultrasonic Bath, 90 Litre deliver?
The Heated Timed Ultrasonic Bath, 90 Litre delivers 800 W effective ultrasonic power and 3200 W peak power at 38 kHz, and has a 2000 W heater. It is the largest bath in this heated ultrasonic range and includes a drain tap for emptying.

What temperature and timer settings does the Heated Timed Ultrasonic Bath, 90 Litre offer?
The Heated Timed Ultrasonic Bath, 90 Litre heats from 30 to 80°C on an analogue dial in 5°C steps. The timer offers 1 to 30 minute presets and a 12-hour run setting, with automatic switch-off after 12 hours if no keys are pressed.

What electrical supply does the Heated Timed Ultrasonic Bath, 90 Litre need?
The Heated Timed Ultrasonic Bath, 90 Litre is listed for 230 V, 50–60 Hz mains. Have an electrician confirm that the outlet suits the 2000 W heater together with the ultrasonic generator before installation.

Who supplies the Heated Timed Ultrasonic Bath, 90 Litre?
Jain Scientific Equipments Pvt Ltd (ScienceLab), based in Ambala, Haryana, India, supplies the Heated Timed Ultrasonic Bath, 90 Litre. It quotes, packs and ships the bath to laboratories and dealers in India and international markets.

Can the Heated Timed Ultrasonic Bath, 90 Litre be ordered for export?
Yes, the Heated Timed Ultrasonic Bath, 90 Litre can be quoted for overseas delivery. Share the destination port or city, quantity and mains supply through the contact page so that freight and voltage can be checked.

Request a Quote

Request a quotation for the Heated Timed Ultrasonic Bath, 90 Litre on our contact page, or collect it with other items in the enquiry cart and send them to us in one go.

Last updated: 24 September 2026

Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths (Product Code: SLE/WB/12) is a see-through, peaked lid used to cover small unstirred laboratory water baths, cutting evaporation and keeping samples and water clean. Its hinge lets you fold it back to reach the tank without lifting it off, and its high profile leaves the full tank usable right into the edges. This water bath accessory for labs in India is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

What Is the Hinged Gable Lid Used For?

An open water bath loses heat and water continuously, especially at higher settings, so the level drops and the heater works harder. Covering a small 2 or 4 litre unstirred bath with this gable lid slows evaporation, keeps dust and splashes out of the water and the sample tubes, and helps the bath hold its set temperature with less energy. The peaked shape means condensation runs down the sloping sides instead of dripping onto open tubes, since the lid has no drip points.

Because the lid is semi-transparent, students and technicians can watch tubes, flasks or incubations without opening it. Hinge it back when loading or removing samples, and lift it off completely for washing. It is a small, useful addition to any biology, chemistry or microbiology bench that runs a compact digital or analogue water bath in India.

What to Specify When Ordering

• The make, model and capacity (2 litre or 4 litre) of the unstirred bath the lid must fit.
• The number of lids, usually one per bath.
• Whether you also need a bath, sphere blanket or thermometer on the same order.

Supplier

This lid is supplied by ScienceLab, the trading name of Jain Scientific Equipments Private Limited, Ambala, Haryana, which sources water bath accessories for schools, colleges, laboratories and dealers in India and international markets. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (IEC AAECJ8618A, GSTIN 06AAECJ8618A1ZT). Learn more on the company profile page.

Related Water Bath Equipment

Pair the lid with these baths and accessories:

• Unstirred Thermostatic Water Bath, 2.5 Litre — a compact analogue bath; ask us to confirm lid fit.
• Digital Unstirred Triple Water Bath — three 4 litre chambers in one unit; ask us about lid fit.
• Polypropylene Water Bath Spheres — another way to cut heat loss where a lid gets in the way.
• Immersion Thermometer — checks the water temperature under the lid.

All baths and accessories are in the Water Bath category.

Frequently Asked Questions

Which baths does the Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths fit?
The Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths is listed for 2 litre and 4 litre unstirred water baths. Tank openings differ between makes, so tell us the make and model of your bath and we will confirm the fit before you order.

Why use a gable lid on a small water bath?
A Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths reduces water evaporation, helps keep samples and water free from contamination and saves energy. Its peaked shape and lack of drip points stop condensate falling back onto the work in the bath.

Can I see inside the bath with the Hinged Gable Lid closed?
Yes. The Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths is semi-transparent, so you can watch tubes and processes in the bath without opening it. Hinge it back when you need to load or remove samples.

How is the Hinged Gable Lid cleaned?
The Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths can be removed completely for cleaning. Wash it with mild detergent and water, rinse and let it dry before refitting; avoid abrasive pads that could scratch the clear surface.

Who supplies the Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths, alone or together with water baths and other accessories, to buyers in India and international markets.

Request a Quote

Tell us the bath the lid is for and the quantity through our contact page, or add the lid to the enquiry cart with your other laboratory items.

Last updated: 24 September 2026

Polypropylene Water Bath Spheres (Product Code: SLE/WB/13) are hollow plastic balls used to form a floating insulating blanket on the surface of a heated laboratory water bath. Spread across the water, they reduce thermal losses and save energy while still letting tubes and flasks be pushed down through the layer. These water bath accessories for labs in India are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

What Are Water Bath Spheres Used For?

Most heat escapes from an open water bath through its surface. A layer of hollow polypropylene spheres floating on the water acts like a loose, self-adjusting cover: the trapped air in each sphere insulates, so the heater cycles less often and the water reaches and holds its set temperature using less energy. A floating layer also shields the water from the room air, which in general helps to cut evaporation and the need for top-ups during long runs.

Unlike a rigid lid, the spheres simply part when you lower a test tube rack, flask or bottle into the bath and close up again around it, so they suit baths of any shape and baths that are loaded often. Add enough spheres to cover the surface completely, lift them out with a sieve or net when you drain the bath, and wash them whenever you clean the bath. They are a simple way to improve the efficiency of an existing water bath in India’s teaching and testing labs.

What to Specify When Ordering

• The internal length and width of the bath you want to cover, so the quantity can be worked out.
• The number of baths to be fitted.
• Any preferred sphere size or pack quantity, which we will confirm with the quotation.

Supplier

Polypropylene Water Bath Spheres are sourced and supplied by ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana. We supply them with our range of water baths and accessories to schools, colleges, research laboratories and distributors in India and international markets. Company details are on the ScienceLab profile page.

Related Water Bath Equipment

The spheres work with open heated baths such as these:

• Unstirred Thermostatic Water Bath, 14 Litre — an analogue bath to 100°C, where covering the water matters most at high settings.
• Unstirred Thermostatic Water Bath, 22 Litre — a wide 500 x 300 mm surface that benefits from a floating blanket.
• Digital Stirred Water Bath, 8 Litre — a digitally controlled bath where saving heat saves running cost.
• Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths — a rigid lid alternative for small baths.

Find more baths in the Water Bath category.

Frequently Asked Questions

What are Polypropylene Water Bath Spheres made of?
Polypropylene Water Bath Spheres are hollow spheres made of polypropylene. Being hollow, they float on the bath water and form a blanket over the surface that reduces thermal losses, which saves energy while the bath is running.

How many Polypropylene Water Bath Spheres do I need?
You need enough Polypropylene Water Bath Spheres to cover the whole water surface. The sphere size and pack quantity are not given in the listing, so send us the internal length and width of your bath and we will quote a suitable quantity.

Can I still put tubes into a bath covered with Polypropylene Water Bath Spheres?
Yes. Polypropylene Water Bath Spheres move aside when you lower tubes, racks or flasks into the water and close around them again, so the blanket stays in place while you load and unload samples.

Should I use a lid or Polypropylene Water Bath Spheres?
Polypropylene Water Bath Spheres suit any bath shape and allow constant access; a rigid lid gives a full cover and view but must be opened to reach samples. For small 2 or 4 litre unstirred baths, the hinged gable lid is an alternative.

Who supplies Polypropylene Water Bath Spheres?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies Polypropylene Water Bath Spheres on their own or together with water baths, racks and lids for laboratories in India and international markets.

Request a Quote

Send your bath size and quantity through our contact page, or add Polypropylene Water Bath Spheres to the enquiry cart with your other items.

Last updated: 24 September 2026

Unstirred Thermostatic Water Bath, 14 Litre (Product Code: SLE/WB/14) is a mid-size analogue laboratory water bath used to hold tubes, flasks and bottles at a steady temperature from 5°C above ambient up to 100°C. Its 325 x 300 x 150 mm tank takes several racks of samples, and it holds ±0.5°C at 45°C, making it an economical general-purpose bath for teaching and routine labs. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a source for water bath lab equipment in India.

Specifications

What Is the 14 Litre Unstirred Water Bath Used For?

A thermostatic water bath surrounds sample containers with water at a set temperature, which heats them more evenly and gently than a hotplate. The 14 litre size is a practical all-rounder for a class or a routine lab: incubating enzyme and serology tubes near body temperature, warming culture media and reagents, melting agar before pouring plates, or running practicals that need a constant-temperature water jacket. Because the bath is unstirred, place samples away from the heater area and allow time for the water to settle at the set point.

Fill with distilled or deionised water to limit scale, check the temperature with a separate thermometer when accuracy matters, and top up as water evaporates. Above 60°C, cover the bath to reduce evaporation and heat loss; the bath will reach 100°C, but it is not meant for continuous boiling. This combination of simple analogue control and a 150 mm deep tank makes it a dependable water bath for labs in India.

What to Specify When Ordering

• Supply voltage: the standard 230 V AC model or the 120 V AC, 50–60 Hz option.
• Tank size: 14 litre, or a smaller or larger bath from the same analogue range.
• Whether you will work above 60°C and need a cover, racks or floating spheres with the bath.
• The number of baths and the delivery location.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the 14 litre unstirred water bath from Ambala, Haryana, to school and college labs, testing laboratories and dealers in India and international markets. Let us know your mains voltage and which accessories you need, and we will quote the complete set. Company information is on the ScienceLab profile page.

Related Water Bath Equipment

Accessories and alternatives for the 14 litre bath:

• Water Bath Stainless Steel Test Tube Rack — holds tubes upright in the water; several fit this size.
• Polypropylene Water Bath Spheres — a floating cover that reduces heat loss at higher settings.
• Unstirred Thermostatic Water Bath, 22 Litre — a larger tank from the same analogue range.
• Laboratory Thermometer — confirms the water temperature independently.

Compare all baths in the Water Bath category.

Frequently Asked Questions

What temperature range does the Unstirred Thermostatic Water Bath, 14 Litre cover?
The Unstirred Thermostatic Water Bath, 14 Litre works from 5°C above ambient up to 100°C, with a stability of ±0.5°C at 45°C. It can operate at 100°C but is not designed for continuous boiling.

What are the tank dimensions of the Unstirred Thermostatic Water Bath, 14 Litre?
The Unstirred Thermostatic Water Bath, 14 Litre has an internal tank of 325 x 300 x 150 mm (W x D x H). Outside, the unit measures 361 x 332 x 290 mm, so it sits comfortably on a standard laboratory bench.

Do I need a lid for the Unstirred Thermostatic Water Bath, 14 Litre?
A lid is recommended when the Unstirred Thermostatic Water Bath, 14 Litre runs above 60°C, to cut evaporation and heat loss. Ask us which cover suits this size, or consider polypropylene spheres as a floating blanket.

Is a 120 V version of the Unstirred Thermostatic Water Bath, 14 Litre available?
Yes, the Unstirred Thermostatic Water Bath, 14 Litre is offered with a 120 V AC, 50–60 Hz option alongside the standard 230 V AC mains model. State the voltage you need when you request a quotation.

Who supplies the Unstirred Thermostatic Water Bath, 14 Litre?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Unstirred Thermostatic Water Bath, 14 Litre to schools, colleges, laboratories and dealers in India and international markets, together with racks, spheres and other bath accessories.

Is a calibration certificate available for the Unstirred Thermostatic Water Bath, 14 Litre?
The listing for the Unstirred Thermostatic Water Bath, 14 Litre does not mention calibration documents. If your lab needs one, raise it on the contact page before ordering and we will tell you what can be arranged.

Request a Quote

Use our contact page to request a quotation, or add the Unstirred Thermostatic Water Bath, 14 Litre and its accessories to the enquiry cart.

Last updated: 24 September 2026

Unstirred Thermostatic Water Bath, 2.5 Litre (Product Code: SLE/WB/15) is a compact analogue water bath used to keep a small number of tubes or vials at a constant temperature on a crowded laboratory bench. With a 230 x 130 x 150 mm tank and an external footprint of just 270 x 190 mm, it suits a single student group, a demonstration or a side bench. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, alongside its laboratory equipment in India.

Specifications

What Is the 2.5 Litre Water Bath Used For?

Small baths are ideal when only a handful of samples need heating: food-test and enzyme practicals for one group of students, warming a few reagent bottles, thawing small samples or keeping tubes at a fixed temperature during a short experiment. The 230 x 130 mm tank opening holds a row of tubes or a small beaker, and the modest water volume means there is less water to heat before work can start.

Several 2.5 litre baths spread around a teaching lab let groups work in parallel without queuing at one large bath. Use distilled water, check the level before each session, and fit a cover when working above 60°C. The bath will run at 100°C for short hot-water steps, but it is not meant for continuous boiling. It is an economical way to equip a school or college biology and chemistry lab in India with individual temperature control.

What to Specify When Ordering

• Mains supply: 230 V AC or the 120 V AC, 50–60 Hz option.
• How many baths you need, for example one per student group.
• Whether a lid or floating spheres should be quoted for work above 60°C.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies the 2.5 litre unstirred bath from Ambala, Haryana, to schools, colleges, clinical training labs and distributors in India and international markets. Class sets of several baths can be quoted together with accessories on a single order. Read about the company on the ScienceLab profile page.

Related Water Bath Equipment

Useful additions and alternatives to a small bath:

• Hinged Gable Lid to Suit 2 & 4 Litre Unstirred Baths — a clear hinged cover for small baths; ask us to confirm fit on this model.
• Polypropylene Water Bath Spheres — a floating blanket that cuts heat loss without blocking access.
• Unstirred Thermostatic Water Bath, 14 Litre — a larger bath from the same range for whole-class racks.
• Test Tube Holder — for lifting hot tubes out of the water safely.

See the complete Water Bath category.

Frequently Asked Questions

How big is the Unstirred Thermostatic Water Bath, 2.5 Litre?
The Unstirred Thermostatic Water Bath, 2.5 Litre has an internal tank of 230 x 130 x 150 mm and measures 270 x 190 x 240 mm overall (W x D x H), so it needs very little bench space and is easy to move between rooms.

How accurate is the Unstirred Thermostatic Water Bath, 2.5 Litre?
The Unstirred Thermostatic Water Bath, 2.5 Litre has a stated sensitivity and stability of ±0.5°C at 45°C. It covers 5°C above ambient up to 100°C; for critical work, check the water with a separate thermometer.

Can the Unstirred Thermostatic Water Bath, 2.5 Litre boil water?
The Unstirred Thermostatic Water Bath, 2.5 Litre will operate at 100°C, which is useful for short hot-water steps, but it is not designed for continuous boiling. A lid is recommended for any work above 60°C.

Which voltages is the Unstirred Thermostatic Water Bath, 2.5 Litre available in?
The Unstirred Thermostatic Water Bath, 2.5 Litre runs on 230 V AC mains as standard, with 120 V AC, 50–60 Hz models as an option. Please state the version on your enquiry.

Who supplies the Unstirred Thermostatic Water Bath, 2.5 Litre?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Unstirred Thermostatic Water Bath, 2.5 Litre, singly or as class sets, to schools, colleges, laboratories and dealers in India and international markets.

Request a Quote

For a quotation, write to us through the contact page with the quantity and voltage, or add the Unstirred Thermostatic Water Bath, 2.5 Litre to the enquiry cart.

Last updated: 24 September 2026

Unstirred Thermostatic Water Bath, 22 Litre (Product Code: SLE/WB/16) is a large analogue laboratory water bath used to warm and incubate many tubes, flasks or bottles at once, from 5°C above ambient to 100°C. Its wide 500 x 300 mm tank opening lets several racks sit side by side, so a whole class or a busy routine lab can share one bath. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its lab water bath range in India.

Specifications

The listing for this analogue range gives the following sizes (internal / external dimensions, W x D x H):

• 2.5 litre: 230 x 130 x 150 mm / 270 x 190 x 240 mm
• 4 litre: 300 x 150 x 150 mm / 332 x 185 x 290 mm
• 8 litre: 300 x 240 x 150 mm / 332 x 270 x 290 mm
• 14 litre: 325 x 300 x 150 mm / 361 x 332 x 290 mm
• 22 litre (this model): 500 x 300 x 150 mm / 538 x 332 x 290 mm
• 28 litre: 500 x 300 x 200 mm / 538 x 332 x 290 mm

What Is the 22 Litre Water Bath Used For?

The 22 litre bath is built for volume rather than depth: its 150 mm deep tank has a long 500 mm working length, so rows of test tube racks, culture bottles or flasks can be warmed together. Typical uses include class practicals where every group’s tubes go into one bath, warming media and buffers before use, holding serology or enzyme samples at a set temperature, and pre-warming solutions in microbiology and food labs.

Load racks evenly along the tank, keep the water level above the sample level, and allow the unstirred water time to reach the set point before starting timed steps. At settings above 60°C a cover or floating spheres will reduce evaporation and heat loss; the bath can reach 100°C but should not be used for continuous boiling. For a college or institution buying a shared water bath for labs in India, this size balances capacity and bench space.

What to Specify When Ordering

• The size you need from the range above; the 22 litre and 28 litre baths share the same footprint, with the 28 litre tank 50 mm deeper.
• Supply voltage: 230 V AC or the 120 V AC, 50–60 Hz option.
• Accessories to quote with the bath, such as stainless steel tube racks or polypropylene spheres.

Supplier

ScienceLab is the trading name under which Jain Scientific Equipments Private Limited, Ambala, Haryana, supplies this 22 litre water bath to schools, universities, testing laboratories and dealers in India and international markets. Buyers completing vendor registration can use the company’s GSTIN 06AAECJ8618A1ZT and Legal Entity Identifier 3358004HRD1JIVXKYX49. More about us is on the company profile page.

Related Water Bath Equipment

These items are commonly ordered with a large unstirred bath:

• Water Bath Stainless Steel Test Tube Rack — 12-hole racks; several fit side by side in this tank.
• Polypropylene Water Bath Spheres — a floating blanket for the wide water surface.
• Unstirred Thermostatic Water Bath, 14 Litre — a smaller bath from the same range.
• Digital Stirred Water Bath, 8 Litre — a digitally set, stirred alternative for tighter temperature work.

All models are listed in the Water Bath category.

Frequently Asked Questions

What size is the tank of the Unstirred Thermostatic Water Bath, 22 Litre?
The Unstirred Thermostatic Water Bath, 22 Litre has an internal tank of 500 x 300 x 150 mm (W x D x H) and an external size of 538 x 332 x 290 mm. The long, shallow tank is suited to rows of racks and bottles.

What is the difference between the 22 litre and 28 litre baths in this range?
The Unstirred Thermostatic Water Bath, 22 Litre and the 28 litre size share the same 538 x 332 x 290 mm outer size and 500 x 300 mm opening. The 28 litre tank is 200 mm deep instead of 150 mm, for taller vessels.

How stable is the temperature in the Unstirred Thermostatic Water Bath, 22 Litre?
The Unstirred Thermostatic Water Bath, 22 Litre is rated at ±0.5°C at 45°C across a range from ambient +5°C to 100°C. As the bath is unstirred, allow time for the water to even out after loading.

What power supply does the Unstirred Thermostatic Water Bath, 22 Litre use?
The Unstirred Thermostatic Water Bath, 22 Litre runs on 230 V AC mains as standard and is also offered as a 120 V AC, 50–60 Hz model. It is an electrical safety Class 1 appliance, so connect it to an earthed outlet.

Who supplies the Unstirred Thermostatic Water Bath, 22 Litre?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Unstirred Thermostatic Water Bath, 22 Litre, with or without racks and spheres, to institutions, laboratories and dealers in India and international markets.

What should I include in a quotation request for the Unstirred Thermostatic Water Bath, 22 Litre?
For the Unstirred Thermostatic Water Bath, 22 Litre, include the quantity, voltage, any racks or spheres, and the delivery address or port. Send the details through the contact page and we will reply with a quotation.

Request a Quote

Ask for a quotation on our contact page, or add the Unstirred Thermostatic Water Bath, 22 Litre and its accessories to the enquiry cart.

Last updated: 24 September 2026

Water Bath Stainless Steel Test Tube Rack (Product Code: SLE/WB/17) is a 12-hole stainless steel rack used to hold test tubes and small bottles upright while they sit in a laboratory water bath. Each hole is 32 mm in diameter, and the rack is sized so that one fits a 4 litre bath and up to six fit a 22 or 28 litre bath. This water bath accessory is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for labs across India.

Specifications

What Is the Water Bath Test Tube Rack Used For?

Tubes left loose in a water bath tip over, float or cluster near the heater. A rack keeps each tube upright in its own position, so every sample gets the same water contact and can be labelled by position for timed experiments such as enzyme activity, food tests or serology incubations. Stainless steel is a good choice for a rack that spends hours in warm water, because it does not absorb water and is easy to wipe clean.

The 32 mm holes accept many common test tubes, boiling tubes and small bottles; check the outside diameter of your vessels first. Several racks can be loaded at the bench and then placed in the bath together, which speeds up class practicals. Match the number of racks to your bath size using the table above, and remove racks when the bath is drained so the tank can be cleaned. It is a simple, durable addition to lab water bath equipment in India.

What to Specify When Ordering

• The capacity of your water bath (4, 8, 14, 22 or 28 litre), which sets how many racks will fit.
• The total number of racks, for example one per student group.
• The largest tube or bottle diameter you will use, to check it passes through a 32 mm hole.

Supplier

The Water Bath Stainless Steel Test Tube Rack is supplied by ScienceLab, the trading name of Jain Scientific Equipments Private Limited, Ambala, Haryana. We supply it on its own or with matching water baths, spheres and lids to schools, colleges, laboratories and dealers in India and international markets. Visit the ScienceLab profile page to learn more about the company.

Related Water Bath Equipment

Baths and glassware that work with this rack:

• Unstirred Thermostatic Water Bath, 14 Litre — a mid-size analogue bath that takes several racks.
• Unstirred Thermostatic Water Bath, 22 Litre — a wide bath for a full set of racks.
• Boiling Tube — larger tubes for heating samples in the bath.
• Test Tube Holder — lifts hot tubes out of the rack safely.

Browse more options in the Water Bath category.

Frequently Asked Questions

How many tubes does the Water Bath Stainless Steel Test Tube Rack hold?
The Water Bath Stainless Steel Test Tube Rack has 12 holes, each 32 mm in diameter, so it holds up to 12 tubes or small bottles upright in the water. Multiple racks can be used together in larger baths.

How many Water Bath Stainless Steel Test Tube Racks fit in my bath?
The listed maximum for the Water Bath Stainless Steel Test Tube Rack is 1 rack in a 4 litre bath, 2 in an 8 litre bath, 4 in a 14 litre bath and 6 in a 22 or 28 litre bath.

What tube sizes fit the Water Bath Stainless Steel Test Tube Rack?
Any tube or bottle narrower than 32 mm will pass through the holes of the Water Bath Stainless Steel Test Tube Rack. Check the outside diameter of your largest vessel, including any rim or cap, before ordering.

Why is the Water Bath Stainless Steel Test Tube Rack made of stainless steel?
The Water Bath Stainless Steel Test Tube Rack is made of stainless steel because it stays in warm water for long periods; the metal does not absorb water, is sturdy enough to carry loaded tubes and is easy to clean between uses.

Who supplies the Water Bath Stainless Steel Test Tube Rack?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Water Bath Stainless Steel Test Tube Rack to schools, colleges, laboratories and distributors in India and international markets, either alone or with compatible water baths.

Request a Quote

Tell us your bath size and the number of racks through our contact page, or add the rack to the enquiry cart with the rest of your order.

Last updated: 24 September 2026

Digital Stirred Water Bath, 8 Litre (Product Code: SLE/WB/18) is a digitally controlled laboratory water bath with a built-in adjustable-speed stirrer, used to heat samples evenly up to 80°C in teaching, research and quality-control labs. The temperature is set in 0.1°C increments and a 1200 W element with energy-saving control provides the heat, giving an economical yet comprehensive heating solution. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for buyers of digital water baths in India.

Specifications

What Is the Digital Stirred Water Bath Used For?

In an unstirred bath, water near the heater is warmer than water at the far end. The stirrer in this 8 litre bath keeps the water moving, so tubes and flasks anywhere in the tank see the same temperature, and the digital setting in 0.1°C steps lets students and technicians repeat a method exactly. That makes it well suited to enzyme kinetics, incubation of assay tubes, dissolving and warming reagents, and any practical where a set temperature must be held consistently up to 80°C.

The listed rack hole sizes cover test tubes (22 mm), boiling tubes (28 mm) and flasks (78 mm), so mixed glassware can be heated in one run. Set the stirrer speed low for small tubes so they are not disturbed, keep the water above the sample level, and use distilled water to limit scale on the element. For school and college labs looking for a digital water bath in India with better uniformity than a basic bath, this is a compact option.

What to Specify When Ordering

• Confirm your mains supply is 220/240 V, 50/60 Hz.
• Which glassware you will use (test tubes, boiling tubes or flasks), and ask us which rack is supplied with the bath.
• The number of baths and any extras such as floating spheres or a reference thermometer.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the Digital Stirred Water Bath, 8 Litre from Ambala, Haryana, to schools, colleges, research labs, industrial QC departments and dealers in India and international markets. Tell us the glassware you plan to use so the quotation covers the right rack arrangement. More information is on the ScienceLab profile page.

Related Water Bath Equipment

Items used alongside, or instead of, a stirred digital bath:

• Polypropylene Water Bath Spheres — reduce heat loss from the water surface.
• Digital Unstirred Water Bath — a digitally controlled bath without a stirrer.
• Unstirred Thermostatic Water Bath, 14 Litre — a larger analogue bath that reaches 100°C.
• Boiling Tube — glassware sized for the boiling-tube rack positions.

Explore other models in the Water Bath category.

Frequently Asked Questions

What temperature can the Digital Stirred Water Bath, 8 Litre reach?
The Digital Stirred Water Bath, 8 Litre heats up to 80°C, and the temperature is set digitally in 0.1°C increments. The lower end of the range is not stated in its listing, so ask us if you need to work close to room temperature.

Why choose a stirred bath like the Digital Stirred Water Bath, 8 Litre?
The Digital Stirred Water Bath, 8 Litre has an adjustable speed stirrer that circulates the water, so samples in every part of the tank sit at a more uniform temperature than in an unstirred bath. The speed can be reduced for delicate tubes.

What glassware fits the Digital Stirred Water Bath, 8 Litre rack?
The Digital Stirred Water Bath, 8 Litre lists rack hole sizes of 15 x 22 mm for test tubes, 15 x 28 mm for boiling tubes and 4 x 78 mm for flasks. Please confirm with us which rack comes with your order.

How much power does the Digital Stirred Water Bath, 8 Litre use?
The Digital Stirred Water Bath, 8 Litre uses a 1200 W heating element with energy-saving control and runs on 220/240 V, 50/60 Hz mains. Connect it to a suitably rated, earthed laboratory socket.

Who supplies the Digital Stirred Water Bath, 8 Litre?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India supplies the Digital Stirred Water Bath, 8 Litre to educational, research and industrial laboratories and dealers in India and international markets.

Can a calibration certificate be supplied with the Digital Stirred Water Bath, 8 Litre?
The listing for the Digital Stirred Water Bath, 8 Litre does not mention calibration paperwork. If your audit or accreditation requires one, raise it on the contact page before you order and we will explain what is possible.

Request a Quote

Request pricing through our contact page, or add the Digital Stirred Water Bath, 8 Litre to the enquiry cart along with glassware and accessories.

Last updated: 24 September 2026