- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Stand With Base Plate H-Shape
Stand With Base Plate H-Shape (Product Code: SLE/LR/12) is a heavy laboratory stand with an H-shaped cast iron base plate, used to carry tall or heavy apparatus such as distillation columns, reflux condensers and large flasks in college, university and research labs. It weighs 8.5 kg, is listed at 420 × 400 × 1000 (length × width × height), and includes one 18/10 stainless steel rod of 1000 × 16 mm with a washer and nut. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for distillation apparatus set-ups in Indian labs.
Specifications
| Parameter | Detail |
|---|---|
| Type | Stand with H-shaped base plate |
| Base material | Cast iron |
| Length (as listed) | 420 |
| Width (as listed) | 400 |
| Height (as listed) | 1000 |
| Weight | 8.5 kg |
| Rod | 1 × 18/10 stainless steel, 1000 × 16 mm (included) |
| Fixings | Washer and nut (included) |
| Product code | SLE/LR/12 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the H-Shape Base Plate Stand Used For?
A 1000 mm rod needs a wide, heavy footing, and that is what the 420 × 400 H-shaped plate and its 8.5 kg of cast iron provide. The stand is chosen for work that would topple a small base: fractional distillation with a long column, Soxhlet extraction, reflux under a condenser, or several clamps stacked up one rod. The 16 mm stainless rod is thick enough to resist bending when those clamps carry glassware well above the bench.
Fix the rod firmly with the included washer and nut before loading, then keep the heaviest vessel low and above the plate. The open centre of the H leaves room to place a heating mantle, burner or lab jack under the flask. Wipe the rod and plate after work; stainless steel resists rust but spilled reagents should not be left to dry on the cast iron.
What to Specify When Ordering
- The number of stands needed.
- Bossheads and clamps suited to a 16 mm rod, if you need them.
- Any spare or longer rods for the same stand.
- The delivery location, in India or abroad.
OEM Manufacturer
Jain Scientific Equipments Private Limited, whose brand is ScienceLab, builds the Stand With Base Plate H-Shape as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Universities, schools, dealers and importers receive it factory-direct, with quotations prepared by the manufacturer rather than a trader.
Ask us about replacement rods, washers or nuts for stands already in use. Company information is available on the ScienceLab profile.
Related Stand Bases, Rods and Rings
Fittings and alternatives for heavy stand work:
- Bosshead Cross Type 18/10 Stainless Steel — joins clamps or cross rods to the upright.
- Retort Clamp Special 3-Prongs, 18/10-Stainless Steel — grips flasks and columns on the stand.
- Rods For Stand Bases — stainless rods, including 16 diameter rods in several lengths.
- H-Frame Complete — a cast iron frame set with rods and bossheads for multi-point work.
- A-Shape Retort Stand Base — another base shape for retort stands.
See the whole Stand Bases, Rods and Rings category.
Frequently Asked Questions
What is included with the Stand With Base Plate H-Shape?
The Stand With Base Plate H-Shape includes the cast iron H-shaped base plate, one 18/10 stainless steel rod measuring 1000 × 16 mm, and a washer and nut. Bossheads and clamps are ordered separately to suit your apparatus.
How heavy and how large is the Stand With Base Plate H-Shape?
The Stand With Base Plate H-Shape weighs 8.5 kg and is listed at 420 length, 400 width and 1000 height. The broad, heavy plate is what lets it carry tall glass assemblies without tipping.
Which bossheads and clamps suit the 16 mm rod?
The Stand With Base Plate H-Shape uses a 16 mm diameter rod, so choose bossheads whose opening takes 16 mm. Tell us the clamps you plan to use through the contact page and we will confirm the fit.
What kind of work is the H-shape base plate stand best for?
The Stand With Base Plate H-Shape suits tall, heavy set-ups such as fractional distillation, Soxhlet extraction and reflux, or several clamps on one rod. For small test-tube work, a lighter base or foot is more practical.
Who manufactures the Stand With Base Plate H-Shape?
The Stand With Base Plate H-Shape is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Spares and repeat orders are handled by the manufacturer.
What should a quotation request for this stand include?
A quotation request for the Stand With Base Plate H-Shape should give the quantity, any bossheads, clamps or extra rods needed, and the delivery location. Institutions in India and international markets can order in bulk.
Request a Quote
Use the contact page or the enquiry cart to request a price. The quotation is sent by the manufacturer itself.
Last updated: 24 September 2026
