Stand Bases Steel Varnished Manufacturer,Supplier and Exporter in India

Stand Bases Steel Varnished (Product Code: SLE/LR/02) is a varnished steel laboratory stand base used as the weighted foot of a retort stand, holding a threaded support rod for clamps, rings and glassware in school and college labs. It is listed in nine sizes weighing from 0.8 kg to 5.0 kg, each with a thread for the rod and one adjustable foot. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Are Varnished Steel Stand Bases Used For?

Every retort stand needs a base heavy enough for the load it carries, and the wide spread of weights here lets a lab match the base to the job. A light 0.8 kg base is enough for a single test-tube clamp on a student bench, while the 4.0 kg and 5.0 kg bases give a tall distillation or reflux assembly, or two clamps reaching out sideways, a much lower risk of tipping. Several footprints are offered in more than one C height, so the same bench space can take a lighter or heavier base.

The varnish coats the steel, helping to protect its surface from moisture in everyday use. Wipe chemical spills off promptly, dry the base after cleaning, and keep it out of burner flames. Screw the support rod fully into the thread and turn the adjustable foot until the base sits without rocking. For schools furnishing chemistry lab equipment in India across many benches, these bases are a practical, bench-by-bench choice.

What to Specify When Ordering

• The size by its A × B × C figures; note that the 210 × 130, 250 × 160 and 315 × 200 footprints come in more than one C height.
• The weight needed for your heaviest set-up, from 0.8 kg up to 5.0 kg.
• How many bases of each size are needed per lab.
• Any support rods, bossheads or rings to be quoted alongside the bases.

OEM Manufacturer

These varnished bases are manufactured by Jain Scientific Equipments Private Limited, the company trading as ScienceLab, which is their OEM (original equipment manufacturer) and produces them at its own licensed factory at Saha, Ambala, Haryana, India. Schools fitting out several benches, colleges, dealers and importers receive quotations for mixed sizes straight from the maker.

Repeat orders in the same sizes, or a replacement adjustable foot, can be requested directly; just ask us. Read about the company on the ScienceLab profile.

Related Stand bases, Rods and Rings

Parts and alternatives that go with a varnished steel stand base:

• Rods For Stand Bases — the upright rod that screws into the base thread.
• Bosshead Malleable Cast Iron Chromium Plated — joins clamps and rings to the rod.
• Crucible Retort Ring — supports crucibles, funnels or gauze on the stand.
• Stand bases 18/10 Stainless Steel — a stainless option with antislide rubber for wet benches.
• Tripod Cast Iron Varnished — a three-legged cast iron base for the same rods.

Browse the Stand bases, Rods and Rings category for all supports and rings.

Frequently Asked Questions

What sizes are available for Stand Bases Steel Varnished?
Stand Bases Steel Varnished is listed in nine sizes (A × B × C): 180 × 100 × 6, 210 × 130 × 6 or 8, 250 × 160 × 6 or 8, 300 × 150 × 6, and 315 × 200 × 6, 8 or 10. Weights range from 0.8 to 5.0 kg.

Which Stand Bases Steel Varnished size is the heaviest?
The heaviest Stand Bases Steel Varnished option is 315 × 200 × 10 at 5.0 kg, followed by 315 × 200 × 8 at 4.0 kg. These heavier bases suit tall or top-heavy assemblies, such as distillation or reflux set-ups, where tipping is a concern.

Can Stand Bases Steel Varnished be levelled on an uneven bench?
Yes. Each Stand Bases Steel Varnished has 1 adjustable foot, which can be turned to stop the base rocking on an uneven bench, so the support rod stands vertical and clamped glassware stays properly aligned.

How should the varnished finish of Stand Bases Steel Varnished be cared for?
To keep the finish of Stand Bases Steel Varnished in good condition, wipe off chemical spills promptly, dry the base after cleaning, and avoid placing it in a burner flame or on a hot plate, where heat can damage the varnish.

How do Stand Bases Steel Varnished compare with the stainless steel bases?
Stand Bases Steel Varnished is made of varnished steel and offers nine sizes up to 5.0 kg, while the Stand bases 18/10 Stainless Steel comes in four sizes and adds antislide rubber protection. Stainless bases suit benches that are wet or cleaned very often.

Who manufactures Stand Bases Steel Varnished?
Stand Bases Steel Varnished is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations for single sizes or mixed sets come directly from the manufacturer.

Request a Quote

List the sizes and quantities you need on our contact page or add the item to the enquiry cart. The manufacturer will quote each size directly.

Last updated: 24 September 2026