Thin walled capilliary tubes, 100mm long, 1mm in diameter.

pH range: 0.00 to 14.00
pH accuracy: ±0.01pH
Range mV: ±1999mV
Resolution mV: ±1mV
Temperature range: 0.0 to 100.0°C
Temperature accuracy: ±0.4°C
Battery: 9V
Dimensions: 145 x 80 x 36mm
Weight: 230g
A portable pH meter with large LCD screen and Manual calibration. 
The plastic bodied pH electrode contains the temperature sensor making it easier to handle. 
Calibration is easily performed using the trimmers on the front of the instrument, with instructions shown on the screen. 
Readings are temperature compensated upto 70°C.
Supplied complete with pH/C probe, battery, instructions and case.

The dual heating block allows for up to a maximum of two samples to be tested simultaneously.
A rotary knob is adjusted to vary the heating rates from 0°C/min to a maximum of 20°C/min to heat the sample to its melt temperature. 
The magnifying lens in the eyepiece aided by the illumination provided by a bright white led gives clear view of the sample during its melting phase.
User Interface Rotary Knob.
Temperature Unit °C
Operating Range Ambient Temperature:380°C
Heating Rates :1°C/min to a max of 20°C/min
Electrical Supply: 230V, 50Hz, 50W
Cabinet Dimensions: W185 x D220 x H176mm
Net Weight: 1.2kg
Temperature range: 380°C. 

Temp.: -40 - 300°C / -40 - 572°F
Resolution: 0.1°
Accuracy: ±1°C (-40 - 150°C) / ±2°C (-40 - 302°C)
Removable stainless-steel probe: 90mm – Ø 3.5mm
Cable: 110cm
MAX/MIN
Data Hold
Magnetic Back

Range: 1 to 13 pH.
Resolution: 0.01 pH.
Accuracy: ±0.01 pH.
Temperature compensation: Automatic from: 0 to 70°C.
Operating temperature: 0 to 50°C.
Power requirements: three 1.5V button cells (type 675H or A76).
Length: 160mm
A pocket pH meter with the accuracy of a bench meter. 
The Piccolo is simple to use and has a dual point calibration. 
The replaceable electrode has a built-in amplifier. 
Supplied complete with batteries, a small screwdriver for calibration and carrying case.


 

Spare Colour Filter Wheel for the S-Range Digital Colorimeter. 
Contains eight Ilford narrow pass filters in plastic circular mount.
violet - 380 - 470nm
blue - 440 - 490nm
blue/ green - 470 - 520nm
green - 500 - 540nm
yellow/ green - 530 - 570nm
yellow - 560 - 610nm
orange - 580 - 700nm
red - 625 - infra red

Temperature compensation: auto 0 to 50°C
Battery: 4 x V675HP
Waterproof pH meter with a casing that will float if dropped in water. 
Resolution with dual level LCD showing pH and temperature readings simultaneously. 
Calibration is automatic (1 or 2 points) using push buttons with a choice of five buffer values. 
For convenience the pH readings can be held on the LCD using the HOLD button and the meter will automatically switch itself off to preserve battery life.  
It can be easily replaced by the user by simply plugging in a new one.


 

Range: Absorbance –0.3A to 1.99A, Transmission 0 to 199%T
Filters: Eight gelatin filters 440 – 680nm range
Bandwidth: 40nm
Repeatability: ±0.02A at 1A
Output: Analogue: 0-2V for 0-2A, 0-1.99V for 0-199T. Via 2 x 4mm sockets & Digital RS232
Cuvette holder: Fixed with drain hole. 
Power: 240V transformer supplied.
Dimensions: 180 x 150 x 60mm
Mass: 0.5kg
Accepts 10mm path length cuvettes or 16mm diameter tubes.