Human Pancreas, Spleen and Duodenum Model (Product Code: SLE/BL/78) is an anatomical model of three neighbouring abdominal organs — the spleen, pancreas and duodenum — used to teach how the pancreas delivers its secretions into the small intestine during digestion, in school, nursing and medical classes. The duodenum shows its internal structures, the position of the pancreatic ducts and the vessels. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Pancreas, Spleen and Duodenum Model Used For?

This model fits the part of a digestion lesson that follows the stomach: food enters the duodenum, where pancreatic juice arrives through the pancreatic ducts to continue breaking it down. With the duodenum displayed to show its interior and duct openings, a teacher can trace that route on the model while students follow the numbers on the key card. The spleen alongside lets the class discuss why an organ next to the digestive tract belongs to the lymphatic and circulatory story rather than to digestion itself.

Biology teachers use it for senior secondary human physiology, while nursing, pharmacy and paramedical colleges use it for abdominal anatomy revision. Among biology teaching aids for the digestive system, it complements a stomach or full digestive-system model rather than replacing it.

OEM Manufacturer

Jain Scientific Equipments Private Limited, marketed under the ScienceLab name, is the OEM (original equipment manufacturer) of this model and produces it at its own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges, dealers and importers receive it factory-direct. ScienceLab is a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714), and its export consignments move under Importer-Exporter Code AAECJ8618A issued by the DGFT.

A replacement key card or a repeat order for another laboratory is handled by the maker itself — just ask. More detail is on our company profile page.

Related Digestive System Models

Other models used when teaching the digestive system and its accessory organs:

• Human Stomach, on Stand — the organ that empties into the duodenum, for the preceding stage of digestion
• Human Liver With Gall Bladder Model — shows the bile-producing organs that also drain into the duodenum
• Digestive System Model 2 part — places these organs within the complete digestive tract
• Pathology of the Human Pancreas, Duodenum, and Gallbladder Model — moves the same region on to disease-related teaching
• Prepared Microscope Slide Set – Digestion (Liver, Pancreas And Tongue) — pancreatic tissue at microscope level

See the full Digestive System range of anatomy models.

Frequently Asked Questions

Which organs does the Human Pancreas, Spleen and Duodenum Model include?
The Human Pancreas, Spleen and Duodenum Model includes three abdominal organs — the spleen, the pancreas and the duodenum — mounted together on one base, so students can see how they sit in relation to one another during a digestion lesson.

How are the parts of the Human Pancreas, Spleen and Duodenum Model identified?
The structures on the Human Pancreas, Spleen and Duodenum Model are coloured and numbered, and a key card lists what each number refers to, so students can test themselves without a separate chart or teacher prompt.

Can the pancreatic ducts be seen on the Human Pancreas, Spleen and Duodenum Model?
Yes. On the Human Pancreas, Spleen and Duodenum Model, the duodenum is presented to show its internal structures together with the position of the pancreatic ducts and the vessels, which lets a teacher trace the route of pancreatic juice.

What size is the Human Pancreas, Spleen and Duodenum Model?
Dimensions of the Human Pancreas, Spleen and Duodenum Model are not stated in our current listing for SLE/BL/78. Contact us and the manufacturer will confirm the size before you place an order.

How should the Human Pancreas, Spleen and Duodenum Model be cared for?
Dust the Human Pancreas, Spleen and Duodenum Model regularly with a soft brush or dry cloth and keep it out of strong direct sunlight. Avoid solvent-based cleaners on the coloured surfaces, and keep the key card with the model.

Who manufactures the Human Pancreas, Spleen and Duodenum Model?
The Human Pancreas, Spleen and Duodenum Model is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come straight from the manufacturer.

Can schools and colleges order the Human Pancreas, Spleen and Duodenum Model in bulk?
Yes. ScienceLab accepts orders for the Human Pancreas, Spleen and Duodenum Model from institutions, dealers and importers in India and international markets. Tell us the quantity and destination so the manufacturer can quote accordingly.

Request a Quote

For a quotation direct from the manufacturer on the pancreas, spleen and duodenum model, send us your requirement or place it in the enquiry cart.

Last updated: 24 September 2026

The Human Placenta Model (Product Code: SLE/BL/79) shows the structure of the placenta and the relationship between the placenta and the umbilical cord, with 7 positions displayed for identification. It is made of advanced PVC and mounted on a stand. Midwifery and obstetric nursing programmes, medical colleges and senior school biology classes use it to explain how a developing baby is nourished during pregnancy. The model is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, a biology lab equipment supplier in India for schools and higher education.

Specifications

Typical Use

The placenta is the organ through which the fetus receives oxygen and nutrients and passes waste back to the mother's blood, and the umbilical cord is the connection that carries that exchange. This model lets tutors show both in one piece: students see the overall structure of the placenta, then follow how the cord joins it. Working through the 7 displayed positions gives a clear order for the explanation and a ready-made set of labelling questions for tests and practical records.

In midwifery training it supports teaching on the delivery of the placenta and its examination after birth, while in school biology it answers the common question of how a baby "breathes" and "eats" before it is born. Institutions building a human biology model set often pair it with fetal development models to show the placenta in context. Wipe the PVC with a soft damp cloth and keep the model on its stand when stored.

Manufacturer

Jain Scientific Equipments Private Limited makes the Human Placenta Model at Ambala in Haryana and sells it under the ScienceLab name, together with its range of reproductive and developmental anatomy models. For more about us, see the company profile.

Related Human Models

Models that place the placenta in the wider story of pregnancy:

• Human Embryo Set, PVC — shows the placenta early in gestation and the fetus in every month that follows
• Human Embryo Development Set — fetal stages and positions within the uterus
• Embryo Model — the 4-week embryo, before the placenta is fully formed
• Human Fetal Circulation Model — how blood from the umbilical cord circulates through the fetus

The full Human Models category lists our other anatomy teaching models.

Frequently Asked Questions

What does the Human Placenta Model show?
The structure of the placenta and the relation between the placenta and the umbilical cord.

How many positions are displayed?
7 positions are displayed. For the list of positions to prepare worksheets, please ask through our contact page.

What is it made from?
Advanced PVC, mounted on a stand.

What are its dimensions?
Dimensions are not listed in our current product details. Contact us and we will confirm them before dispatch.

Is it useful for midwifery training?
Yes. It helps trainees understand placental structure and the cord attachment, which underpins teaching on the third stage of labour and placental examination.

How do we request an institutional or export quotation?
Send the product code SLE/BL/79, quantity and delivery location. We supply India and international markets and confirm warranty terms on the quotation.

Request a Quote

For pricing on the Human Placenta Model, contact us via the contact page or add it to the enquiry cart with any embryo or fetal development models you need.

Last updated: 24 September 2026

Human Skeleton with Internal Organs & Muscles (Product Code: SLE/BL/80) is a human skeleton model with removable organs used to teach how the bones frame and protect the chest and abdominal organs in school biology, nursing and paramedical classes. Its limbs, rib cage, two-part heart, lungs, stomach, liver and small and large intestines are all removable, so students can take the body apart layer by layer. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Key Details

What Is the Skeleton with Internal Organs Used For?

A common lesson starts with the complete figure, then the rib cage is lifted away to reveal the heart and lungs beneath it. Students take out the two-part heart, separate its halves and replace it before moving down to the stomach, liver and intestines. Working in that order shows why the ribs protect the thoracic organs, where the liver sits under the lower ribs, and how the intestines fill the abdominal cavity. Detaching the limbs then shifts the lesson back to the skeleton itself, for identifying long bones and the joints at the shoulder, elbow, hip and knee.

Because every listed organ comes out, the model also works well for quick assessment: hand a student a removed part and ask them to name it and return it to the right place. Institutions assembling high school biology lab equipment often choose this style of combined model where display space is limited.

OEM Manufacturer

ScienceLab is the trade name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) that produces this skeleton-and-organs model at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy it factory-direct rather than through a trader.

With a model made up of many removable parts, buying from the manufacturer matters: if an organ goes missing or a department wants a second figure, ask us and the maker will look into it. Our company profile gives an overview of the organisation.

Related Bone Models

Useful companions when the skeleton and internal organs are taught together:

• Human Muscular and Ligamentous Skeleton — focuses on muscle attachments and ligaments for the movement side of the lesson
• Human Thoracic Organs Model — a closer look at the chest organs revealed when the rib cage is removed
• Human Digestive System Model — expands on the stomach, liver and intestines in more detail
• Human Skeleton, Rod-Supported — a skeleton-only model when bones alone are the topic

More skeletons and joint models are listed in the Bone Model category.

Frequently Asked Questions

Which parts of the Human Skeleton with Internal Organs & Muscles can be removed?
On the Human Skeleton with Internal Organs & Muscles, all the limbs, the rib cage, the two-part heart, the lungs, the stomach, the liver, and the small and large intestines are removable for layer-by-layer study.

How are the muscles shown on the Human Skeleton with Internal Organs & Muscles?
The Human Skeleton with Internal Organs & Muscles includes muscles as its name indicates, but our current listing does not break down which muscle groups are shown. Contact us for photographs or a detailed parts list before ordering.

What height is the Human Skeleton with Internal Organs & Muscles, and does it have a stand?
Overall height and the type of stand for the Human Skeleton with Internal Organs & Muscles are not given in our present product data. Ask us and the manufacturer will confirm both before you place an order.

How should the removable parts of the Human Skeleton with Internal Organs & Muscles be stored?
Keep the organs of the Human Skeleton with Internal Organs & Muscles fitted in place when the model is not in use so none are misplaced, and store the figure away from heat and direct sunlight.

Is the Human Skeleton with Internal Organs & Muscles suitable for schools?
Yes. The removable organs and limbs of the Human Skeleton with Internal Organs & Muscles suit school biology lessons on body systems, and the same features support revision in nursing and paramedical courses.

Who manufactures the Human Skeleton with Internal Organs & Muscles?
The Human Skeleton with Internal Organs & Muscles is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come straight from the manufacturer.

Can you quote the Human Skeleton with Internal Organs & Muscles for several units or an export order?
Yes. For the Human Skeleton with Internal Organs & Muscles, share the quantity, the delivery location in India or international markets, and any other anatomy models needed in the same shipment, and ScienceLab will prepare a combined quotation.

Request a Quote

For a price direct from the manufacturer, contact us about the Human Skeleton with Internal Organs & Muscles, or save it to the enquiry cart and submit it with the rest of your list.

Last updated: 24 September 2026

Human Skull Model, Plastic (Product Code: SLE/BL/81) is an economical life-size adult skull replica used to teach skull bones, sutures and teeth in school biology and introductory anatomy classes. It is dissectible into 3 parts, with a moveable jaw, a cut calvarium, visible suture lines and 3 removable lower teeth: an incisor, a cuspid and a molar. This piece of school biology lab equipment is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Plastic Human Skull Model Used For?

Students use the model to identify the main skull bones and follow the suture lines where they meet, then lift off the cut calvarium to view the inside of the cranium. The removable incisor, cuspid and molar let teachers compare the three tooth types and explain their roles in biting, tearing and grinding food.

Because it is an economical plastic model, a school can issue one to several groups at once for hands-on identification practice, making it a practical biology teaching aid. Work the moveable jaw gently, keep the removable teeth in a small labelled box when not in use and clean the surface with a damp cloth.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM manufacturer of this plastic skull and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Buyers receive the model straight from the factory rather than through a trader, and can ask the manufacturer about replacement teeth or repeat orders for new class groups. More about the company is on the ScienceLab profile.

Related Skulls

Other skulls and accessories that teachers often compare with this model.

• Human Skull Model, Life Size Colored — a 3-part skull with each bone painted a different colour.
• Human Skull Bones Model — a detailed skull disarticulated into many sections for advanced study.
• Economy Human Skull — another budget skull option in the range.
• Human Skull Storage Case, Black Plastic — for keeping a skull model protected between lessons.

Compare every model in the Skulls range.

Frequently Asked Questions

How many parts does the Human Skull Model, Plastic separate into?
The Human Skull Model, Plastic is dissectible into 3 parts. The calvarium is cut so the top of the skull lifts away, and the lower jaw is moveable, letting students view the cranial cavity and demonstrate jaw movement.

Which teeth are removable?
The Human Skull Model, Plastic has 3 removable lower teeth: an incisor, a cuspid (canine) and a molar. Students can take them out to compare the three tooth types, then refit them in the jaw after the lesson.

Is the plastic skull life-size?
Yes. The Human Skull Model, Plastic is a life-size adult skull, so students study the bones and suture lines at their real scale. Exact dimensions are not listed; ask us through the contact page if your tender needs them.

Who manufactures the Human Skull Model, Plastic?
The Human Skull Model, Plastic is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order directly from the maker.

Is this skull suitable for school use?
Yes. The Human Skull Model, Plastic is an economical model suited to school biology labs and introductory anatomy classes, where several groups need a skull at the same time to identify bones, sutures and teeth.

How do I request a quotation?
For the Human Skull Model, Plastic, send the number of models, any storage cases needed and the delivery location through the contact page or enquiry cart. The quotation comes directly from ScienceLab as the manufacturer.

Request a Quote

Get a quotation for the Human Skull Model, Plastic by writing through the contact page or adding it to the enquiry cart with the quantity you need.

Last updated: 24 September 2026

Human Skull Model, Life Size Colored (Product Code: SLE/BL/82) is a life-size skull model with its bones painted in different colours, used to help students identify individual cranial and facial bones in biology and anatomy classes. It disassembles into 3 parts, so learners can study the outer bone boundaries and then look inside the skull. One of the human anatomical models made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, it is produced at the company's own factory in Ambala, India.

Key Details

What Is a Colour-Coded Skull Model Used For?

Colour-coding makes the boundaries between bones obvious, so students can quickly pick out bones such as the frontal, parietal, temporal and occipital and see where each one ends. Teachers often use a coloured skull for the first introduction to skull anatomy, then move to a plain skull where bones must be identified by their sutures alone.

Taking the model apart into its 3 parts lets students see the inner surface of the skull as well as the exterior. Handle painted surfaces with clean, dry hands, avoid solvent cleaners that could lift the paint and store the model covered between lessons.

What to Specify When Ordering

• How many colour-coded skulls you need, for example one per demonstration bench or per student group.
• Whether a plain skull is also needed for suture-based identification tests.
• Any storage cases or related anatomy models to include in the same quotation.

OEM Manufacturer

The model is manufactured by ScienceLab, the trading name of Jain Scientific Equipments Private Limited, which is the OEM and makes and assembles its anatomical models at its own licensed factory at Saha, Ambala, Haryana, India. Institutional and tender buyers can register the company as a vendor using GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Colleges, schools, dealers and importers get quotations straight from the manufacturer. Read the company profile.

Related Skulls

Skulls and head models that extend lessons with this colour-coded skull.

• Human Skull Model, Plastic — an economical plain skull with removable teeth.
• Human Skull Bones Model — a skull disarticulated into many sections with a sectioned base.
• Human Skull with Facial Muscles — to connect skull bones with the facial muscles.
• Human Brain Model in Head — to relate the skull to the brain it protects.

The Skulls category lists the full set of skull models.

Frequently Asked Questions

Why are the bones on the Human Skull Model, Life Size Colored painted?
On the Human Skull Model, Life Size Colored, the bones are painted in different colours so that each bone and its boundaries can be identified precisely. This makes the model easier for beginners than a plain skull, where the sutures are the only guide.

How many parts does the coloured skull come apart into?
The Human Skull Model, Life Size Colored disassembles into 3 parts, allowing students to examine both the outer surface and the inside of the skull. Reassemble the parts after each lesson so that none are misplaced.

Is the coloured skull life-size?
Yes. The Human Skull Model, Life Size Colored is made at life size, so the bones, openings and proportions are studied at real scale. Exact dimensions and material are not listed; ask us if your purchase file needs them.

Who manufactures the Human Skull Model, Life Size Colored?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Human Skull Model, Life Size Colored as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Colleges, schools, dealers and importers buy directly from the maker.

How should the painted model be cleaned?
Clean the Human Skull Model, Life Size Colored with a soft, slightly damp cloth and dry it straight away. Avoid solvents, abrasive pads and strong disinfectants, which can dull or lift the painted colours that make the bones identifiable.

Can the model be supplied for a tender or bulk order?
Yes. The Human Skull Model, Life Size Colored can be quoted in bulk for schools, colleges, tenders and dealers across India and international markets. Send the quantity, delivery location and any vendor-registration requirements through the contact page.

Request a Quote

Request a manufacturer-direct quotation for the Human Skull Model, Life Size Colored through the contact page, or add it to the enquiry cart with other anatomy models.

Last updated: 24 September 2026

Human Skeleton Model, Disarticulated (Product Code: SLE/BL/83) is an economical, life-size set of loose adult human bones used to teach bone identification in anatomy classrooms and osteology practicals. Students, nurses, doctors and anyone learning the skeleton can handle about 200 different bones one at a time instead of viewing them on a wired figure. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of the human skeleton model in India, at its own factory in Ambala.

Key Details

What Is the Disarticulated Human Skeleton Model Used For?

Loose bones are the standard tool for osteology practicals. A tutor can hand out a single bone and ask the student to decide which side of the body it comes from, name its parts and describe what attaches to it — tasks that are hard to do on a wired skeleton where bones cannot be turned over. Groups can also sort the full set by region (skull, vertebral column, thorax, upper limb, lower limb) or rebuild a limb on the bench to see how the bones meet at each joint.

Because it is an economical grade, colleges often buy several sets so that small groups each have their own bones during a practical, which keeps queues short in busy anatomy halls. It works well beside articulated skeletons and single-bone models as part of a department’s biology teaching aids, giving learners both the whole-body picture and the detail of each bone.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this disarticulated skeleton. The bones are made at the company’s own licensed factory at Saha, Ambala, Haryana, India, not bought in from a trader, and are supplied factory-direct to medical, nursing and science institutions as well as to dealers and importers. If a bone goes missing from a set, ask us about a replacement piece — such requests are handled by the manufacturer itself. Learn more on the company profile page.

Related Bone Models

Items that support the same osteology and skeleton lessons:

• Disarticulated Human Skeleton — a 53-piece alternative with strung hands, feet and spine, supplied in a storage case
• Human Skeleton Storage Case, Black Plastic — a lidded case with carrying handle for keeping loose bones together
• Human Skeleton, Hang-Up — an assembled reference skeleton for checking where each loose bone belongs
• Human Skull Model, Plastic — a 3-part skull for closer study of the cranium alongside the loose bones
• Human Femur Bone Model — a single-bone model for detailed work on the thigh bone

Browse every skeleton, spine and joint model in the Bone Model category.

Frequently Asked Questions

How many bones are in the Human Skeleton Model, Disarticulated?
The Human Skeleton Model, Disarticulated contains about 200 different bones of an adult human skeleton, all at life size. They are separate pieces, so each bone can be picked up, turned over and identified on its own during an osteology practical.

Is the Human Skeleton Model, Disarticulated supplied assembled?
No. The Human Skeleton Model, Disarticulated consists of loose bones rather than a wired, standing skeleton. Teachers who also want an assembled reference usually pair it with an articulated figure such as the Human Skeleton, Hang-Up from the same range.

Who is the Human Skeleton Model, Disarticulated meant for?
The Human Skeleton Model, Disarticulated is a visual aid for anatomy instruction of students, doctors and nurses, and for anyone interested in the human skeleton. Its economical grade suits colleges that need several sets for group practicals.

Does the Human Skeleton Model, Disarticulated come with a storage case?
A storage case is not listed with the Human Skeleton Model, Disarticulated (SLE/BL/83). A separate Human Skeleton Storage Case, Black Plastic is available in the same range; ask us whether it suits this set when you request a quotation.

Who manufactures the Human Skeleton Model, Disarticulated?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Human Skeleton Model, Disarticulated. It is made at the company’s own factory at Saha, Ambala, Haryana, India, and quotations come directly from the manufacturer.

How can a lab keep a Human Skeleton Model, Disarticulated set complete?
Count the bones of the Human Skeleton Model, Disarticulated back in by body region after each session and store every set in its own labelled container. This stops pieces from different sets being mixed in a busy anatomy hall.

Can several sets of the Human Skeleton Model, Disarticulated be ordered for a college?
Yes. Multiple sets of the Human Skeleton Model, Disarticulated can be quoted for medical, nursing and science colleges in India and international markets. State the number of sets, the product code SLE/BL/83 and your delivery location in the enquiry.

Request a Quote

Send your requirement through the contact page or add the disarticulated skeleton to your enquiry cart. Quotations come directly from the manufacturer in Ambala.

Last updated: 24 September 2026

Human Skull Model, Fetal Child (Product Code: SLE/BL/84) is a lifelike PVC model of a fetal skull used to teach how the separate bones of a developing skull are arranged in biology, nursing, midwifery and medical classes. Measuring 10 x 8 x 10 cm, it shows the major structure of the different skull bones and has a spring-hinged mandible that opens to show the mouth's bone structures. The model is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Fetal Skull Model Used For?

A fetal skull looks very different from an adult one: the bones of the vault are still separate plates, and the face is small compared with the cranium. Teachers use this model beside an adult skull to explain skull growth, the role of sutures and fontanelles during birth, and how the jaw develops.

In nursing and midwifery training it supports lessons on the fetal head during delivery, and in school biology it works as a teaching aid for human development. Open the spring-hinged mandible gently to show the mouth region, and wipe the PVC surface with a damp cloth after handling.

OEM Manufacturer

ScienceLab, the trade name of Jain Scientific Equipments Private Limited, is the OEM and anatomical models maker that produces this fetal skull model at its own licensed factory at Saha, Ambala, Haryana, India. Nursing schools, medical colleges, schools, dealers and importers can buy it factory-direct and ask the manufacturer about repeat orders or matching anatomy models. The ScienceLab profile has more about the company.

Related Skulls

Models that pair with the fetal skull in development and childbirth lessons.

• Fetal Skull — another fetal skull model in the range.
• Human Skull Model, Plastic — a life-size adult skull for comparing adult and fetal bones.
• Human Birth Demonstration Model — to show the fetal head in relation to the birth process.
• Human Fetal Circulation Model — for related lessons on fetal development.

More adult and fetal skulls are listed under Skulls.

Frequently Asked Questions

What size is the Human Skull Model, Fetal Child?
The Human Skull Model, Fetal Child measures 10 x 8 x 10 cm and is made of PVC plastic. Its compact, lifelike form shows the major structure of the different bones of a fetal skull for close study on the bench.

Does the mandible move?
Yes. The mandible of the Human Skull Model, Fetal Child is spring-hinged, so it can be opened to view the bone structures of the mouth. Open and close it gently to protect the hinge.

Who uses a fetal skull model?
The Human Skull Model, Fetal Child is used in nursing, midwifery, medical and senior biology classes to explain how a fetal skull differs from an adult skull and how its separate bones relate to growth and childbirth.

Who manufactures the Human Skull Model, Fetal Child?
The Human Skull Model, Fetal Child is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), acting as the OEM, at its licensed factory in Saha, Ambala, Haryana, India. Institutions and dealers order directly from the maker.

How should the PVC model be cleaned?
Wipe the Human Skull Model, Fetal Child with a soft cloth lightly dampened with water and mild soap, dry it well, and keep it away from heat sources and direct sunlight while it is stored.

How do I order the fetal skull model?
To order the Human Skull Model, Fetal Child, send the quantity and delivery location in India or abroad through the contact page or add it to the enquiry cart. ScienceLab will send a quotation direct from the manufacturer.

Request a Quote

Place an enquiry for the Human Skull Model, Fetal Child through the contact page or the enquiry cart; the manufacturer replies with a quotation.

Last updated: 24 September 2026

Human Teeth Model, Dentition Development (Product Code: SLE/BL/85) is a stand-mounted anatomy model used to teach how human teeth develop from birth to adulthood in biology classrooms and health science teaching. It displays the upper and lower jaws at four stages (a newborn, a 5-year-old child, a 9-year-old child and a young adult), coloured, numbered and keyed with a key card. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM anatomical models manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Dentition Development Model Used For?

Placing four jaws side by side lets students see that the dentition is not fixed but changes through childhood. Teachers use the stages to explain the milk (deciduous) teeth of early childhood, the mixed period when permanent teeth begin to replace them, and the complete permanent set of the young adult, linking the model to lessons on growth, nutrition and dental care.

Because every stage is numbered and keyed, the model works well for identification practice and practical tests: students name the numbered teeth, then check against the key card. It is a clear addition to biology teaching aids in India's school, nursing and paramedical classrooms. Dust it with a soft, dry cloth and keep it away from direct sunlight and solvents so the colours last.

What to Specify When Ordering

• Complete four-stage model on its stand, or individual stages only (each part is available individually on demand)
• If ordering individually: which stage you need (newborn, 5-year-old, 9-year-old or young adult)
• Number of models per laboratory or classroom
• Any other teeth models you want quoted together, such as the lower jaw or incisor models

OEM Manufacturer

The Human Teeth Model, Dentition Development is produced by Jain Scientific Equipments Private Limited, which trades as ScienceLab and is the original equipment manufacturer (OEM) of this model. It is made and finished at the company's own licensed factory at Saha, Ambala, Haryana, rather than bought in from a trader, so schools, colleges, dealers and importers receive it factory-direct. Requests for single stages, replacement parts or repeat orders go straight to the manufacturer. Read more on our company profile.

Related Human Models

Other dental and skull models that support the same lessons on teeth and jaw growth:

• Human Teeth Model, Lower Jaw — shows the position of every tooth in the lower jaw in detail
• Human Teeth Model, Incisor — an enlarged incisor that divides into two parts to show inside the tooth
• Human Teeth Model — an enlarged teeth model with a tooth brush for oral hygiene lessons
• Human Skull Model, Fetal Child — for comparing the skull and jaws before birth

Browse all anatomy models in our Human Models category.

Frequently Asked Questions

Which stages does the Human Teeth Model, Dentition Development show?
The Human Teeth Model, Dentition Development shows the upper and lower jaws of a newborn child, a 5-year-old child, a 9-year-old child and a young adult, so students can compare how the teeth change from birth to adulthood in a single display.

Is the dentition model labelled?
Yes, the Human Teeth Model, Dentition Development is numbered and comes with a key card identifying the numbered features. This helps students revise on their own and lets teachers use the model for identification tests.

Can one stage of the model be bought on its own?
Yes, each part of the Human Teeth Model, Dentition Development is also available individually on demand. State which stage you need (newborn, 5-year-old, 9-year-old or young adult) when you request a quotation.

How is the Human Teeth Model, Dentition Development mounted?
The Human Teeth Model, Dentition Development is mounted on a stand and is appropriately coloured and neatly finished, so all four stages stay together as one display on a bench, shelf or teacher's desk.

What material and size is the model?
The material and overall dimensions of the Human Teeth Model, Dentition Development are not stated in this listing. Please ask through our contact page and we will confirm them with your quotation.

Who manufactures the Human Teeth Model, Dentition Development?
The Human Teeth Model, Dentition Development is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India, and is sent factory-direct to schools, colleges, dealers and importers.

Request a Quote

Quotations for the Human Teeth Model, Dentition Development come directly from the manufacturer. Send your quantity and whether you need the full set or single stages through our contact page, or add the model to the enquiry cart.

Last updated: 24 September 2026