- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P
Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P (Product Code: SLE/WDF/22) is a small-bore uPVC equal elbow used to change the direction of a 32 mm outside-diameter PVC water line in building and site plumbing. Both ends are female sockets joined by solvent cement, which suits service lines to taps, hand-wash points and sinks, including a new school lab setup. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Equal elbow |
| Ends | Female x female (fxf) sockets |
| Joint | Solvent cement jointing |
| Pipe outside diameter | 32 mm (both ends) |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/22 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 32mm PVC Equal Elbow Used For?
Smaller 32 mm lines carry water from a main or tank to the points where people actually use it: wash basins, taps, laboratory sinks and toilet blocks. They run along walls, under benches and around columns, and every corner needs an elbow. Because both sockets are the same size, this fitting simply turns the pipe without changing its bore.
Dry-fit the run first and mark the alignment on pipe and fitting, since a solvent joint allows no adjustment once it grabs. Then cut square, deburr, clean, cement and push home in one movement to the mark. Support the pipe with clips on either side of the elbow so the joint is not carrying the weight of the line.
What to Specify When Ordering
- Pipe size: 32 mm outside diameter on both ends.
- Joint type: solvent-cement uPVC pipe (not threaded or compression).
- Quantity: count every bend on the layout drawing, plus a few spares for site changes.
- Transitions: note any point where the 32 mm line meets G.I. pipe, which needs a threaded fitting instead.
Supplier
This 32 mm elbow is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name in Ambala, Haryana. Schools, colleges and WASH project teams that buy laboratory items from ScienceLab can add plumbing fittings like this one to the same enquiry rather than sourcing them separately. More about the company is on the profile page.
Related Water, Sanitation & Hygiene Supplies
Other fittings used when routing water lines of different sizes and materials:
- Elbow 90º, PVC scj/fthd, 40mm x 1¼"-P — a bend that also changes a 40 mm PVC line to threaded G.I.
- Elbow 90º equal fthd GI ND 14 Bar — the threaded G.I. equivalent for metal sections.
- Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P — branches a larger supply main upstream of the service lines.
- Elbow 90º Equal PVC, fxf, rrj, 200mm OD-P — a rubber-ring elbow for large-diameter mains.
The complete list of fittings, pumps and hygiene products is in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What pipe does the Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P fit?
The Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P fits uPVC pipe of 32 mm outside diameter on both ends. Each end is a female socket that receives the pipe and is fixed with solvent cement, so both pipes must be the same 32 mm size.
What does fxf mean on the 32mm PVC equal elbow?
On the 32mm PVC equal elbow, fxf means female x female: both ends are sockets that the pipe slides into. There is no male spigot or thread, so the elbow joins two plain pipe ends directly by solvent cement.
What pressure can the 32mm PVC equal elbow handle?
The 32mm PVC equal elbow (Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P) is rated 10 bar at 20°C, with a suitable temperature range of 0 to 50°C. The safe working pressure is lower in warmer water, so check it against your system design.
Is the Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P suitable for drinking water?
Drinking-water suitability of the Elbow Equal PVC fxf, Solvent Cement Joint, 32mm OD-P is something to confirm with us for your specific installation. If a tender or project file needs this point settled, raise it through the contact page before ordering.
Who supplies the 32mm PVC equal elbow?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 32mm PVC equal elbow to schools, institutions, contractors and dealers in India and international markets, and can quote it together with other water-supply fittings.
Request a Quote
For pricing on product code SLE/WDF/22, send the quantity and delivery location through the contact page, or add it to the enquiry cart along with the other fittings on your plumbing list.
Last updated: 24 September 2026
Union Equal PVC, fxf, scj 10Bar 110mm OD-P
Union Equal PVC, fxf, scj 10Bar 110mm OD-P (Product Code: SLE/WDF/23) is a uPVC pipe union used to join two 110 mm outside-diameter PVC pipes with a connection that can later be opened for maintenance in water-supply systems. Utility, WASH and campus maintenance teams place it beside pumps, meters and valves; both female ends are solvent-cemented and the fitting is rated 10 bar at 20°C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Equal union |
| Ends | Female x female (fxf) |
| Joint | Solvent cement fitting (scj) |
| Pipe outside diameter | 110 mm (both ends) |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/23 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110mm PVC Union Used For?
Most solvent-weld joints are permanent, which makes equipment hard to remove. A union solves this: it is designed so the pipeline can be separated at the fitting without cutting pipe. Placing a 110 mm union on each side of a pump, flow meter, filter or valve lets that item be lifted out for repair and refitted, while the rest of the network stays intact.
Dry-assemble the union before cementing so you know how its parts go together, because the order cannot be changed once the ends are bonded. Cement each 110 mm pipe fully into its socket, let the joints cure, and only then pressurise. Leave enough clearance around the union for hands and tools, and keep operation within the 10 bar at 20°C rating.
What to Specify When Ordering
- Pipe size: 110 mm outside diameter uPVC on both sides.
- Number of service points: usually two unions for each pump, meter or valve to be removable.
- Pressure class: confirm 10 bar at 20°C suits your system.
- Other fittings: list couplers, tees or caps for the same 110 mm line.
Supplier
Jain Scientific Equipments Private Limited, known to customers as ScienceLab, supplies this 110 mm PVC union from its base in Ambala, Haryana. Water-supply fittings are sourced for schools, NGOs, contractors and dealers who want one point of contact for both laboratory and infrastructure purchases. See the ScienceLab company profile for background.
Related Water, Sanitation & Hygiene Supplies
Items commonly planned together with a removable joint on a 110 mm line:
- Pump Centrifugal, Diesel 50cbm/hr — equipment whose pipe connections are often fitted with unions for servicing.
- Coupler Straight/Equal PVC, skt, scj, 110mm-P — a permanent straight joint where no opening is needed.
- Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P — branches the 110 mm main to a 90 mm line.
- Cap, female PVC, scj, 110mm OD-P — closes the end of the same 110 mm run.
More fittings, pumps and hygiene supplies are listed under Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What is the Union Equal PVC, fxf, scj 10Bar 110mm OD-P used for?
The Union Equal PVC, fxf, scj 10Bar 110mm OD-P joins two 110 mm PVC pipes with a connection that can be separated later, so pumps, meters or valves on the line can be removed for maintenance without cutting the pipe.
How is the 110mm PVC union different from a straight coupler?
The 110mm PVC union can be opened after installation, whereas a straight coupler forms a permanent solvent-welded joint. Use the union where access is needed later and a coupler where the pipe will never be disconnected.
What pressure rating does the 110mm PVC union have?
The 110mm PVC union (Union Equal PVC, fxf, scj 10Bar 110mm OD-P) is rated 10 bar at 20°C and suits water from 0 to 50°C. At higher water temperatures the safe pressure falls, so confirm working conditions with your system designer.
Can the Union Equal PVC, fxf, scj 10Bar 110mm OD-P be used on drinking-water lines?
Confirm with ScienceLab before fitting the Union Equal PVC, fxf, scj 10Bar 110mm OD-P to a drinking-water line. Share the project details through the contact page and ask what information can be provided for the batch in your quotation.
Who supplies the 110mm PVC union?
Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, supplies the 110mm PVC union for schools, WASH programmes, contractors and importers in India and international markets, and can combine it with other 110 mm fittings in one quotation.
Request a Quote
To price product code SLE/WDF/23, share the quantity and delivery location via the contact page, or add the union to the enquiry cart together with the other items for your pump or valve station.
Last updated: 24 September 2026
Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P
Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P (Product Code: SLE/WDF/24) is a uPVC tee used to take a threaded 4" galvanised iron (G.I.) branch off a 110 mm outside-diameter PVC main in water-supply networks. Its two run ends are female solvent-cement sockets for the PVC pipe, while the third outlet is female threaded for the G.I. pipe, giving a mixed-material junction in one piece. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Tee adaptor |
| Run ends | Two female ends, solvent cement fixing, for PVC pipe of 110 mm outside diameter |
| Branch | One female threaded connection for G.I. pipe of 4" nominal diameter |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/24 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110mm x 4 inch PVC Tee Adaptor Used For?
Water schemes often combine a PVC trunk main with G.I. branches, risers or older threaded pipework. This tee lets the 110 mm PVC main run straight through while a 4" G.I. pipe or threaded fitting is screwed into the side outlet, so the branch can feed a riser, an existing metal network or a threaded valve assembly without a separate adaptor.
Screw the G.I. branch in first, sealed with PTFE tape and tightened with care, then solvent-cement the two PVC run ends. Support the metal branch independently with clamps or a pipe support, because a heavy G.I. pipe hanging off a plastic thread strains the fitting. Operate within 10 bar at 20°C and 0 to 50°C.
What to Specify When Ordering
- Main size: 110 mm outside diameter PVC, solvent-cement jointed.
- Branch size: 4" nominal diameter G.I. pipe with a male thread.
- Number of branch points on the network drawing.
- If the branch should stay in PVC, consider an all-PVC tee instead and tell us which.
Supplier
ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, supplies this PVC tee adaptor as part of a sourced range of pipe fittings, pumps and hygiene products for institutional and project buyers. Customers ordering laboratory equipment can include these items in the same enquiry. Learn more on the company profile page.
Related Water, Sanitation & Hygiene Supplies
Other ways to join 110 mm PVC to 4" G.I. pipework, and alternative tees:
- Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P — an in-line transition with a male thread.
- Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P — an in-line transition with female ends.
- Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P — an all-PVC tee when the branch stays in plastic.
- T, PP comp, HDPE 110 x 110 x 110mm OD-P — a compression tee for 110 mm HDPE pipe.
All pipe fittings and related products are in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What connections does the Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P have?
The Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P has two female solvent-cement sockets for 110 mm outside-diameter PVC pipe and one female threaded outlet for 4" nominal-diameter G.I. pipe.
What do O/ND and fthd mean in the 110mm x 4" tee adaptor name?
In the 110mm x 4" tee adaptor name, O/ND means the PVC size is an outside diameter (110 mm) and the G.I. size is a nominal diameter (4"), while fthd means female threaded, describing the branch outlet.
What pressure is the 110mm x 4" PVC tee adaptor rated for?
The 110mm x 4" PVC tee adaptor is rated 10 bar at 20°C, with a suitable temperature range of 0 to 50°C. PVC carries less pressure in warmer water, so the designer should confirm the working pressure for the expected temperature.
Is the Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P suitable for drinking water?
Drinking-water use of the Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P should be discussed with us for your application first. Send the scheme details through the contact page so ScienceLab can tell you what it is able to confirm for the supplied batch.
Who supplies the 110mm x 4" PVC tee adaptor?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110mm x 4" PVC tee adaptor to schools, WASH projects, contractors and dealers across India and international markets, and can quote it with matching PVC and G.I. fittings.
Request a Quote
Request pricing for product code SLE/WDF/24 by sending quantity and delivery location through the contact page, or add it to the enquiry cart with the rest of your network fittings.
Last updated: 24 September 2026
Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P
Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P (Product Code: SLE/WDF/25) is a uPVC reducing tee used to split a PVC water line into a branch of a different size, for pipes of 110 mm and 90 mm outside diameter. Network planners use it where a sub-main leaves the main supply at a smaller bore; every end is a female socket joined by solvent cement, rated 10 bar at 20°C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Tee, reducing |
| Ends | Female on all ends (fxf) |
| Joint | Solvent cement jointing |
| Pipe outside diameters | 110 x 90 mm |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/25 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110 x 90mm PVC Reducing Tee Used For?
In a distribution network the flow shrinks as water is drawn off, so branch lines are often a size smaller than the main. A reducing tee makes that step at the junction itself, which avoids adding a separate equal tee and reducer and cuts the number of joints. Typical uses are feeding a school block, a hostel or a group of stand posts from a 110 mm supply.
A reducing tee normally carries the larger size on the straight run and the smaller size on the branch; check the fitting on receipt and plan the layout accordingly. Solvent-cement each socket after cleaning and deburring, and anchor the branch near the tee so pipe movement does not load the junction. Keep pressures within 10 bar at 20°C.
What to Specify When Ordering
- Sizes: 110 mm and 90 mm outside-diameter uPVC pipe.
- Configuration: tell us which size your run and branch need so we can confirm the fitting matches.
- Quantity: one tee per branch take-off on the network plan.
- Matching items: 110 mm and 90 mm couplers, reducers or unions for the same job.
Supplier
This reducing tee is supplied by Jain Scientific Equipments Private Limited, trading as ScienceLab, from Ambala, Haryana. The company sources pipe fittings for water-supply and sanitation work so that institutions and contractors can combine them with laboratory purchases. For vendor registration, the supplying company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. See the ScienceLab profile for more.
Related Water, Sanitation & Hygiene Supplies
Fittings used alongside a 110 x 90 mm branch junction:
- Reducing Coupler PVC skt scj 110x90mm-P — steps the same sizes down in a straight line with no branch.
- Coupler Reducing PP Comp, HDPE 110x90mm OD-P — the equivalent reduction for HDPE pipe with compression joints.
- Union Equal PVC, fxf, scj 10Bar 110mm OD-P — adds a removable joint on the 110 mm main.
- Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P — a tee whose branch connects to threaded G.I. pipe.
Browse the full Water, Sanitation & Hygiene Supplies range for more fittings.
Frequently Asked Questions
What pipe sizes does the Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P join?
The Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P joins uPVC pipes of 110 mm and 90 mm outside diameter. All ends are female sockets fixed with solvent cement; tell us your run and branch sizes so we can confirm the configuration.
Why use the 110 x 90mm PVC reducing tee instead of an equal tee?
The 110 x 90mm PVC reducing tee branches and reduces in one fitting, so a separate reducer is not needed. Fewer joints mean less cementing work and fewer possible leak points on the network.
What is the pressure rating of the 110 x 90mm PVC reducing tee?
The 110 x 90mm PVC reducing tee is rated 10 bar at 20°C and is suitable for water from 0 to 50°C. Because PVC loses pressure capacity as temperature rises, confirm the design pressure for the actual water temperature.
Is the Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P for drinking water?
Ask us to confirm drinking-water suitability of the Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P for your network before ordering. Where a tender or project needs this point answered in writing, raise it through the contact page when you request the quotation.
Who supplies the 110 x 90mm PVC reducing tee?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110 x 90mm PVC reducing tee to schools, WASH programmes, contractors and importers in India and international markets, together with other PVC fittings.
Request a Quote
Send the quantity of product code SLE/WDF/25 and your delivery location via the contact page, or add the tee to the enquiry cart with the other items on your network bill of materials.
Last updated: 24 September 2026
Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P
Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P (Product Code: SLE/WDF/26) is a straight uPVC adaptor used to connect a 110 mm outside-diameter PVC pipe to 4" nominal-diameter galvanised iron (G.I.) pipework in water-supply lines. One end is a female solvent-cement socket for the PVC pipe; the other is a male BS thread that screws into a female-threaded G.I. fitting or valve. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Straight adaptor |
| PVC end | Female, solvent cement fitting, for PVC pipe of 110 mm outside diameter |
| G.I. end | Male, BS threaded, for G.I. pipework of 4" nominal diameter |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/26 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110mm PVC to 4 inch GI Male Adaptor Used For?
When a new PVC main has to connect into existing metal pipework, the join usually happens at a threaded G.I. socket, a threaded valve or another female-threaded fitting. This adaptor is cemented onto the end of the 110 mm PVC pipe and its male thread is then screwed into that metal fitting, giving a straight, in-line change from plastic to G.I.
Wrap the male plastic thread with PTFE tape and tighten steadily; a plastic male thread in a metal socket needs firm but not excessive torque. It helps to screw the adaptor into the G.I. fitting first and cement the PVC pipe afterwards, so the solvent joint is not twisted. Use the fitting within 10 bar at 20°C and 0 to 50°C.
What to Specify When Ordering
- PVC side: 110 mm outside diameter, solvent-cement pipe.
- G.I. side: a 4" female-threaded fitting to receive the male BS thread; tell us your thread standard so we can confirm it matches.
- Male or female: if your G.I. side ends in a male pipe thread, you need the female-ended adaptor instead.
- Quantity of transition points on the drawing.
Supplier
Jain Scientific Equipments Private Limited supplies this male-threaded PVC adaptor under its ScienceLab name from Ambala, Haryana. Water and sanitation items like this are sourced for schools, public-health projects, contractors and dealers, and can be quoted on the same enquiry as laboratory equipment. Background on the company is on the profile page.
Related Water, Sanitation & Hygiene Supplies
Alternatives and companions for joining 110 mm plastic pipe to 4" metal pipework:
- Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P — the female-both-ends version for a male-threaded G.I. pipe end.
- Adaptor PP Comp, HDPE 110mmxmthd GI. 4"O/ND-P — a male-threaded adaptor for HDPE rather than PVC pipe.
- Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P — used when the G.I. connection is a side branch.
- Coupler Straight/Equal PVC, skt, scj, 110mm-P — extends the PVC pipe up to the transition point.
Find more fittings in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What does the Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P connect?
The Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P connects a 110 mm outside-diameter PVC pipe, cemented into its female socket, to 4" nominal-diameter G.I. pipework through its male BS thread.
What is the difference between the fxm and fxf 110mm x 4" PVC adaptors?
The fxm 110mm x 4" PVC adaptor has a male thread that screws into a female G.I. fitting, while the fxf version has female ends on both sides. Choose by whether the G.I. connection you meet is female or male.
What pressure rating does the 110mm x 4" fxm PVC adaptor have?
The 110mm x 4" fxm PVC adaptor is rated 10 bar at 20°C and suits water from 0 to 50°C. As water temperature rises the allowable PVC pressure drops, so the design pressure should allow for service conditions.
Is the Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P suitable for drinking water?
Suitability of the Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P for drinking water should be confirmed with us against your application. Describe the pipeline through the contact page and ask what information is available for the batch before placing the order.
Who supplies the 110mm x 4" fxm PVC adaptor?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110mm x 4" fxm PVC adaptor for water projects, schools, contractors and dealers in India and international markets, and can quote matching PVC and G.I. fittings.
Request a Quote
Ask for a price on product code SLE/WDF/26 through the contact page with your quantity and delivery location, or add it to the enquiry cart with the rest of your transition fittings.
Last updated: 24 September 2026
Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P
Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P (Product Code: SLE/WDF/27) is a straight uPVC adaptor with female ends on both sides, used to join a 110 mm outside-diameter PVC pipe to a 4" nominal-diameter galvanised iron (G.I.) pipe in water-supply work. The PVC pipe is solvent-cemented into one socket and the G.I. pipe end enters the other, so the line changes material without changing direction. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Straight adaptor, female both ends |
| PVC end | Female, solvent cement joint, for PVC pipe of 110 mm outside diameter |
| G.I. end | Female, for G.I. pipe of 4" nominal diameter |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/27 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110mm PVC to 4 inch GI Female Adaptor Used For?
This adaptor suits the situation where the metal side ends in a pipe rather than a socket: for example an existing G.I. line that has been cut back, or a G.I. pipe coming up from a well, tank outlet or pump house. The G.I. pipe end goes into one female end and the new 110 mm PVC pipe is cemented into the other, giving a straight transition between the two systems.
Prepare the G.I. pipe end cleanly and seal the connection as the joint type requires; ask us to confirm the thread form of the G.I. end before you cut and thread pipe on site. Cement the PVC side after the G.I. side is made up, and support both pipes near the adaptor so the plastic is not bending under the weight of the metal. Work within 10 bar at 20°C.
What to Specify When Ordering
- PVC side: 110 mm outside diameter, solvent-cement pipe.
- G.I. side: a 4" nominal-diameter G.I. pipe end entering a female connection.
- Thread form: state your local G.I. thread so we can confirm the match before dispatch.
- Choose the male-threaded (fxm) adaptor instead if the G.I. side is a female socket or valve.
Supplier
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies this female-ended PVC adaptor from Ambala, Haryana. The company's water-supply range is sourced for institutions, WASH programmes, contractors and dealers who prefer to handle fittings and laboratory items through one supplier. Visit the company profile to learn more.
Related Water, Sanitation & Hygiene Supplies
Other 110 mm to 4" connection options and companions:
- Adaptor fxm, scj, PVC 110mm x GI.4" O/ND-P — male-threaded version for a female G.I. socket or valve.
- Coupler PVC Socket Solvent Cement Joint Flange, 110mm x 4" — a flanged transition where the metal side is flanged.
- Tee Adaptor fxf, scj, PVC 110mm x 4" fthd O/ND-P — for a G.I. branch rather than an in-line change.
- Union Equal PVC, fxf, scj 10Bar 110mm OD-P — adds a joint on the PVC side that can be opened later.
See every fitting in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What does the Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P join?
The Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P joins a 110 mm outside-diameter PVC pipe to a 4" nominal-diameter G.I. pipe in a straight line. Both ends are female; the PVC side is fixed with solvent cement.
When should I choose the fxf 110mm x 4" adaptor rather than the fxm version?
Choose the fxf 110mm x 4" adaptor when the G.I. side is a pipe end that must enter the fitting. Choose the fxm version when the G.I. side is a female socket or valve that needs a male thread screwed into it.
What is the pressure rating of the 110mm x 4" fxf PVC adaptor?
The 110mm x 4" fxf PVC adaptor is rated 10 bar at 20°C and is suitable for water from 0 to 50°C. PVC's safe pressure falls in warmer water, so allow for the service temperature in your design.
Can the Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P be used for drinking water?
Check drinking-water use of the Adaptor fxf, scj, PVC 110mm x GI.4" O/ND-P with ScienceLab for your installation before buying. Include the intended service in your enquiry on the contact page, and we will tell you what can be confirmed for the supplied batch.
Who supplies the 110mm x 4" fxf PVC adaptor?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110mm x 4" fxf PVC adaptor to schools, WASH projects, contractors and importers across India and international markets, alongside related PVC and G.I. fittings.
Request a Quote
For a quotation on product code SLE/WDF/27, send the quantity, delivery location and your G.I. thread details through the contact page, or add it to the enquiry cart.
Last updated: 24 September 2026
Reducing Coupler PVC skt scj 110x90mm-P
Reducing Coupler PVC skt scj 110x90mm-P (Product Code: SLE/WDF/28) is a straight uPVC reducing socket used to join a 110 mm outside-diameter PVC pipe to a 90 mm one in a single in-line water-supply connection. Installers use it where a main narrows along its route or meets an existing 90 mm line; both female ends are solvent-cemented and the coupler is rated 10 bar at 20°C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Straight coupling (socket), reducing |
| Ends | Female x female |
| Joint | Solvent cement jointing |
| Pipe outside diameters | 110 mm x 90 mm |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/28 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110 x 90mm PVC Reducing Coupler Used For?
Pipelines are often sized down as demand falls towards the far end of a network, and new work frequently has to tie into an older line of a smaller size. The reducing coupler makes that step in a straight run: the 110 mm pipe is cemented into the larger socket and the 90 mm pipe into the smaller one, with no branch and no change of direction.
Water speeds up as it passes into the smaller pipe, so designers usually place reductions where flow has already dropped. On site, clean and deburr both pipe ends, cement each socket in turn, and keep the two pipes aligned while the joints set. The fitting's rating is 10 bar at 20°C across a 0 to 50°C temperature range.
What to Specify When Ordering
- Sizes: 110 mm and 90 mm outside-diameter uPVC pipe.
- Joint type: solvent-cement pipe on both sides.
- Quantity: one per size change on the route.
- If a branch is also needed at the reduction point, specify a reducing tee instead.
Supplier
Jain Scientific Equipments Private Limited, which trades as ScienceLab in Ambala, Haryana, supplies this reducing coupler as part of its sourced water and sanitation range. Institutions and project buyers can request these fittings together with laboratory equipment on one enquiry and one set of documents. Read about the company on the ScienceLab profile.
Related Water, Sanitation & Hygiene Supplies
Fittings planned around a 110 to 90 mm change of size:
- Reducing Tee, PVC, fxf, scj, 10Bar, 110x90mm OD-P — reduces and branches at the same point.
- Coupler Reducing PP Comp, HDPE 110x90mm OD-P — the same reduction for HDPE pipe using compression joints.
- Coupler Straight/Equal PVC, skt, scj, 110mm-P — joins 110 mm lengths before the reduction.
- Union Equal PVC, fxf, scj 10Bar 110mm OD-P — a removable joint on the larger line.
The whole range is listed in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What sizes does the Reducing Coupler PVC skt scj 110x90mm-P connect?
The Reducing Coupler PVC skt scj 110x90mm-P connects a uPVC pipe of 110 mm outside diameter to one of 90 mm outside diameter. Both ends are female sockets joined with solvent cement in a straight line.
How is the 110 x 90mm reducing coupler different from a reducing tee?
The 110 x 90mm reducing coupler changes pipe size in a straight run with no side outlet, whereas a reducing tee also creates a branch. Use the coupler where the line simply continues at the smaller size.
What pressure is the 110 x 90mm PVC reducing coupler rated for?
The 110 x 90mm PVC reducing coupler is rated 10 bar at 20°C and suits water from 0 to 50°C. Since PVC carries less pressure as temperature rises, the working pressure should be checked against actual service conditions.
Is the Reducing Coupler PVC skt scj 110x90mm-P suitable for drinking water?
Please confirm with us whether the Reducing Coupler PVC skt scj 110x90mm-P suits your drinking-water application before ordering. Mention the intended use when you enquire through the contact page, and ask what documentation is available for the batch you are offered.
Who supplies the 110 x 90mm PVC reducing coupler?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110 x 90mm PVC reducing coupler to schools, WASH programmes, contractors and dealers in India and international markets, and can include it in a combined fittings quotation.
Request a Quote
Share the quantity of product code SLE/WDF/28 and your delivery location via the contact page, or add the coupler to the enquiry cart with the rest of your pipeline list.
Last updated: 24 September 2026
Coupler Straight/Equal PVC, skt, scj, 110mm-P
Coupler Straight/Equal PVC, skt, scj, 110mm-P (Product Code: SLE/WDF/29) is an equal uPVC socket coupling used to join two lengths of 110 mm outside-diameter PVC pipe end to end in pressurised water lines. It is the most frequently needed fitting on a plain-ended PVC main and is also used for repairs; both female sockets are solvent-cemented and it is rated 10 bar at 20°C. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Fitting type | Straight coupling (socket), equal |
| Ends | Female x female |
| Joint | Solvent cement fitting |
| Pipe outside diameter | 110 mm |
| Material | uPVC (un-plasticised polyvinyl chloride) |
| Pressure rating | 10 bar at 20°C |
| Suitable temperature range | 0 to 50°C |
| Product code | SLE/WDF/29 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 110mm PVC Straight Coupler Used For?
Pipes come in fixed lengths, so a long 110 mm main needs a joint wherever two plain pipe ends meet. The straight coupler provides it: each pipe is cemented halfway into the fitting and the line continues at full bore. It is also the standard repair part, because a damaged section can be cut out and a new piece fitted with couplers, provided the pipe can be moved enough to slide the sockets on.
Mark half the socket depth on each pipe end so both are pushed in equally, then cement one side, then the other. Keep the pipe straight and still until the joints grab, and allow the cement to cure fully before pressure testing. Buried joints should be bedded evenly so they are not carrying point loads from stones.
What to Specify When Ordering
- Pipe size: 110 mm outside-diameter uPVC on both ends.
- Quantity: roughly one coupler per plain-ended pipe length, plus spares for repairs.
- Pressure class: confirm 10 bar at 20°C matches your system design.
Supplier
ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, supplies this straight coupler within its sourced range of PVC, G.I. and HDPE fittings. Buyers who already order laboratory equipment or hygiene items from ScienceLab can add pipeline fittings to the same enquiry. Company details are on the profile page.
Related Water, Sanitation & Hygiene Supplies
Other 110 mm fittings used along the same pipeline:
- Union Equal PVC, fxf, scj 10Bar 110mm OD-P — used instead of a coupler where the joint must be openable.
- Reducing Coupler PVC skt scj 110x90mm-P — continues the line at 90 mm.
- Coupler PVC Socket Solvent Cement Joint Flange, 110mm x 4" — connects the 110 mm pipe to flanged equipment.
- Cap, female PVC, scj, 110mm OD-P — closes the end of the line.
For more items, visit Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What is the Coupler Straight/Equal PVC, skt, scj, 110mm-P used for?
The Coupler Straight/Equal PVC, skt, scj, 110mm-P joins two 110 mm outside-diameter uPVC pipes end to end with solvent cement, extending a pipeline or repairing it after a damaged section has been cut out.
Can the 110mm PVC straight coupler be used for pipe repairs?
Yes, the 110mm PVC straight coupler is commonly used for repairs: the damaged part is cut out and a new piece is cemented in with couplers. The existing pipe must have enough movement to slide the sockets over the ends.
What pressure rating does the 110mm PVC straight coupler have?
The 110mm PVC straight coupler (Coupler Straight/Equal PVC, skt, scj, 110mm-P) is rated 10 bar at 20°C and suits water from 0 to 50°C. Warmer water reduces PVC's safe pressure, so design with the service temperature in mind.
Is the Coupler Straight/Equal PVC, skt, scj, 110mm-P suitable for drinking water?
Drinking-water suitability of the Coupler Straight/Equal PVC, skt, scj, 110mm-P should be confirmed with ScienceLab for the specific line. If your project file needs this settled, state the application in your enquiry via the contact page and ask what can be provided for the batch.
Who supplies the 110mm PVC straight coupler?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, supplies the 110mm PVC straight coupler to schools, WASH programmes, contractors and dealers in India and international markets, in quantities quoted to match your pipeline length.
Request a Quote
To price product code SLE/WDF/29, send the quantity and delivery location through the contact page, or add it to the enquiry cart together with the other fittings for your main.
Last updated: 24 September 2026
