- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Pan and Goose Neck Trap
Pan and Goose Neck Trap (Product Code: SLE/SAH/13) is a sanitation fitting set, made up of a latrine pan and a goose neck water-seal trap, used to add a pan and water seal beneath a squatting plate in latrine installations. It is intended for squatting plates of 120 cm x 80 cm, so sanitation teams and site engineers can match it directly to that plate size. The set is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory equipment supplier in India that also sources water, sanitation and hygiene items.
Key Details
| Parameter | Detail |
|---|---|
| Contents | Pan and goose neck trap, supplied as a set |
| Intended for | Squatting plate of 120 cm x 80 cm |
| Trap type | Goose neck (water-seal) trap |
| Material, dimensions, seal depth | Not stated in our listing — ask us for the details of the set quoted |
| Product code | SLE/SAH/13 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Pan and Goose Neck Trap Used For?
A goose neck trap is a curved section below the pan that holds back a small amount of water after each use. That water seal separates the user from the pit or drain below, which helps limit odour and keeps flies from moving freely between the pit and the cubicle. Fitting a pan and trap under a squatting plate turns a simple direct-drop hole into a water-sealed latrine that is flushed by pouring in a little water.
The set is chosen for latrines built on 120 cm x 80 cm squatting plates, such as those used in camps, schools and community sanitation projects. When installing, keep the joint between plate and pan firm and leak-free, and make sure the trap is refilled with water after cleaning so the seal is never left dry. Avoid putting stones, rags or other solid objects into the pan, as they can block the bend.
What to Specify When Ordering
- Number of sets — usually one for each 120 cm x 80 cm squatting plate being fitted.
- Confirmation that your squatting plates measure 120 cm x 80 cm.
- Whether a goose neck trap or a P trap arrangement suits your drain layout.
- Delivery destination, within India or for export.
Supplier
This set is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab and is based in Ambala, Haryana. Alongside educational laboratory equipment, the company sources sanitation fittings such as this pan and trap for institutions, project buyers and dealers in India and international markets. Read more about the company on the ScienceLab company profile.
Related Water, Sanitation & Hygiene Supplies
These items are used alongside the pan and goose neck trap when building or upgrading a latrine:
- Squatting Plate, Plastic, W/o pan, 120x80cm — a plate in the 120 x 80 cm size this set is intended for.
- Pan and "P" Trap For Squatting Plate — the alternative trap shape if a P trap suits your drain layout better.
- Latrine Superstructure Single Cubicle — a cabin kit to enclose a single latrine.
- Latrine Add-On Child and Disabled People — a raised-seat kit that makes the latrine easier to use for children and people with disabilities.
Browse the complete Water, Sanitation & Hygiene Supplies range for latrine parts, handwashing and cleaning items.
Frequently Asked Questions
What is included in the Pan and Goose Neck Trap set?
The Pan and Goose Neck Trap (SLE/SAH/13) is listed as a set made up of a latrine pan and a goose neck trap. Fixing hardware, sealant and the squatting plate itself are not listed as part of the set, so please confirm the exact contents with us when you request a quotation.
Which squatting plate does the Pan and Goose Neck Trap fit?
The Pan and Goose Neck Trap is intended for squatting plates of 120 cm x 80 cm. If your plates are a different size or come from another source, send us their dimensions and drop-hole details before ordering so the fit can be checked.
What does the goose neck trap do?
The goose neck trap in this pan set holds a small volume of water in its curved section after flushing. This water seal separates the latrine user from the pit or drain below and helps reduce odour and fly access, provided the trap is kept topped up with water.
What material is the Pan and Goose Neck Trap made of?
Our listing for the Pan and Goose Neck Trap does not state its material, wall thickness or water-seal depth. Please ask us through the contact page and we will share the details of the set offered before you confirm an order.
Who supplies the Pan and Goose Neck Trap?
The Pan and Goose Neck Trap is supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, from Ambala, Haryana, India. The company sources sanitation items like this set for institutions, project buyers and dealers in India and international markets.
What should a quotation request for the Pan and Goose Neck Trap include?
For a Pan and Goose Neck Trap quotation, share the number of sets, confirmation of your 120 cm x 80 cm plate size, any preference between goose neck and P trap designs, and the delivery destination. Adding related latrine items to the same enquiry lets them be quoted together.
Request a Quote
To order the Pan and Goose Neck Trap, send your quantity and delivery location through the contact page, or add it to the enquiry cart together with other water, sanitation and hygiene supplies.
Last updated: 24 September 2026
Squatting Plate, Plastic, W/o pan, 120x80cm
Squatting Plate, Plastic, W/o pan, 120x80cm (Product Code: SLE/SAH/14) is a self-supporting plastic direct-drop latrine slab used to cover latrine pits and trenches in emergency sanitation situations. Moulded in LLDPE with foot rests, a keyhole-shaped drop hole and an attached HDPE keyhole cover, it comes without a pan but is prepared for later water-seal installation. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab equipment exporter that also sources emergency sanitation items.
Specifications
| Parameter | Detail |
|---|---|
| Size | 120 cm x 80 cm |
| Type | Self-supporting, direct-drop squatting plate with foot rests; supplied without pan |
| Plate material | Moulded in LLDPE (other plastic-based materials may be used, keeping the slab light, sturdy and easy to clean) |
| Cover | Attached keyhole cover moulded in HDPE, preferably hinged |
| Drop hole | Keyhole shape, dimensioned so that a small child cannot pass through |
| Top surface | Slight slope towards the drop hole to make cleaning easier |
| Load support | Minimum 150 kg at the centre, with each end resting on no more than 100 mm of firm support, allowing for tropical ambient temperatures and direct sunshine |
| Reinforcement | Embedded metal insert, strong honeycomb structure or other long-term reliable means |
| Pan and trap fixing | Arrangement on the underside for fastening a pan/bowl and water-seal trap if required, by bolting or another secure method |
| Anchoring | Holes in the four corners for four metal anchor/fixation pegs of 8 mm x 275 mm (included), with a water-tight fit |
| Peg storage | Storage arrangement on the underside of the plate suggested |
| Product code | SLE/SAH/14 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Plastic Squatting Plate Used For?
In the first phase of an emergency response, this plate is laid over a latrine pit or trench to give people a safe, cleanable squatting surface without waiting for concrete slabs to be cast and cured. The foot rests show users where to stand, the keyhole drop hole is sized with small children in mind, and the attached cover can be closed between uses to keep flies and odour down.
For installation, rest the plate on firm ground at both ends and drive the four supplied metal pegs through the corner holes so it cannot shift. Because the underside is prepared for a pan and water-seal trap, the same plate can later be upgraded from direct drop to a water-sealed latrine. Wash the surface towards the drop hole, where the built-in slope carries water and dirt away.
What to Specify When Ordering
- Number of plates needed for the pits or trenches on your site.
- Whether you also need a pan with P trap or goose neck trap now or later.
- Superstructure required — single-cubicle or double-cubicle kits.
- Whether some latrines need an accessibility add-on for children and people with disabilities.
Supplier
Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies this squatting plate as part of its water, sanitation and hygiene range. Emergency programmes, institutions and dealers in India and international markets can source the plate together with pans, traps and cabin kits from one supplier. The ScienceLab company profile explains who we are and how we work.
Related Water, Sanitation & Hygiene Supplies
Items that complete a latrine built on this 120 x 80 cm plate:
- Pan and "P" Trap For Squatting Plate — converts the direct-drop hole into a water-sealed latrine.
- Pan and Goose Neck Trap — a pan and trap set intended for 120 cm x 80 cm plates.
- Latrine Superstructure Single Cubicle — a lockable cabin kit for one plate.
- Latrine Add-On Child and Disabled People — an elevated seat kit that fits the same plate size.
- Mould Plastic for Concrete Latrine Slab — for casting concrete slabs locally once the site is established.
See every item in the Water, Sanitation & Hygiene Supplies category.
Frequently Asked Questions
Does the Squatting Plate, Plastic, W/o pan, 120x80cm come with a pan?
No. The Squatting Plate, Plastic, W/o pan, 120x80cm is supplied without a pan. Its underside has an arrangement for bolting or otherwise securely fastening a pan/bowl and water-seal trap if required, so a pan and trap can be ordered separately.
How much weight can the plastic squatting plate support?
This 120 x 80 cm plastic squatting plate is specified to securely support a minimum of 150 kg at the centre, with its two ends resting on no more than 100 mm of firm support each, taking tropical ambient temperatures and direct sunshine into account.
Are anchor pegs included with the squatting plate?
Yes. Four metal anchor/fixation pegs measuring 8 mm x 275 mm are included with the Squatting Plate, Plastic, W/o pan, 120x80cm. They pass through holes in the four corners with a water-tight fit, and a storage arrangement for them on the underside is suggested.
Is the drop hole of the squatting plate safe for small children?
The keyhole-shaped drop hole of this plastic squatting plate is dimensioned so that a small child cannot pass through it, and the attached HDPE keyhole cover can be closed when the latrine is not in use. Supervising young children in latrines remains good practice.
What material is the plastic squatting plate made of?
The squatting plate is moulded in LLDPE, and its keyhole cover in HDPE. The specification allows other materials as long as they are plastic based, light, sturdy and easy to clean, so ask us to confirm the material of the plates quoted to you.
Who supplies the Squatting Plate, Plastic, W/o pan, 120x80cm?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, India, supplies this plastic squatting plate to emergency programmes, institutions and dealers. Send quantity and destination through our contact page to receive a quotation.
Request a Quote
Tell us how many plates you need and whether pans, traps or superstructures should be included via the contact page, or place the item in the enquiry cart with the rest of your sanitation list.
Last updated: 24 September 2026
Mould Plastic for Concrete Latrine Slab
Mould Plastic for Concrete Latrine Slab (Product Code: SLE/SAH/15) is a polymeric form used to cast concrete latrine slabs on site for household, school and community sanitation. Made of UV-protected, impact-resistant polymer 4 mm thick with a very smooth finish, it produces a slab of 60 x 60 cm, around 8 cm thick, with two raised foot rests and a child-safe drop hole. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, whose scientific equipment bulk supply work extends to sanitation items like this mould.
Specifications
| Parameter | Detail |
|---|---|
| Type | Polymeric (plastic) form for casting a concrete latrine slab |
| Mould material | High-quality polymers with a very smooth finish; UV protected and impact resistant |
| Mould material thickness | 4 mm |
| Field use | Able to stand rough handling under field conditions |
| Finished slab size | 60 x 60 cm (horizontal dimensions) |
| Finished slab thickness | Around 8 cm |
| Slab features | Two raised foot rests; drop hole dimensioned to be safe for small children; surfaces sloping towards the drop hole for easy cleaning |
| Product code | SLE/SAH/15 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Latrine Slab Mould Used For?
The mould lets sanitation teams, masons and community groups make concrete latrine slabs close to where they are needed, using locally available cement and aggregate instead of transporting finished slabs. Concrete is placed in the form, compacted and left to cure; once released, the slab already has its foot rests, drop hole and cleaning slope moulded in, so every slab from the same mould comes out consistent.
Because a mould is used again and again, durability matters: this one is UV protected and built to stand rough field handling. Practical tips: work on level ground, clean the form after every casting so the smooth finish transfers to the next slab, and follow local engineering guidance on concrete mix, any reinforcement and curing time before slabs are placed over pits.
What to Specify When Ordering
- Number of moulds, based on how many slabs your teams plan to cast at the same time.
- Confirmation that a 60 x 60 cm slab, around 8 cm thick, suits your pit openings.
- Whether ready-made plastic squatting plates are also needed for immediate use while slabs cure.
Supplier
The mould is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, from Ambala in Haryana. Sanitation programmes, contractors and dealers can source it alongside other latrine components and hygiene supplies, for delivery in India and international markets. More about the company is on the ScienceLab profile page.
Related Water, Sanitation & Hygiene Supplies
Other items often ordered with a latrine slab mould:
- Squatting Plate, Plastic, W/o pan, 120x80cm — a ready-made plastic plate for latrines that must open before cast slabs are ready.
- Latrine Superstructure Single Cubicle — a lockable cabin kit designed for standard 120 x 80 cm plates.
- Sprayer Trigger Bottle Handheld 1 Liter — for disinfecting latrine slab surfaces during routine cleaning.
- Child Potty — for young children who are not yet using a latrine.
Explore the full Water, Sanitation & Hygiene Supplies range.
Frequently Asked Questions
What size slab does the Mould Plastic for Concrete Latrine Slab produce?
The Mould Plastic for Concrete Latrine Slab produces a finished slab of 60 x 60 cm with a thickness of around 8 cm. Each slab has two raised foot rests, a drop hole dimensioned to be safe for small children and surfaces that slope towards the hole for easy cleaning.
How durable is the latrine slab mould?
The latrine slab mould is made of high-quality polymers 4 mm thick that are UV protected and impact resistant, and it is designed to stand rough handling under field conditions. The number of castings per mould is not stated, so ask us if you need that for planning.
Is concrete or reinforcement included with the mould?
No. The Mould Plastic for Concrete Latrine Slab is listed as the plastic form only. Cement, aggregate, any reinforcement and a release agent are sourced locally, and the concrete mix should follow your engineering team's guidance for latrine slabs.
Why cast concrete slabs instead of using plastic plates?
Casting slabs with this mould lets local teams produce latrine slabs near the site from local materials once a programme is established, while plastic squatting plates are quicker to deploy in the first days. Many buyers use both, depending on the stage of the response.
Who supplies the Mould Plastic for Concrete Latrine Slab?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies the Mould Plastic for Concrete Latrine Slab to sanitation programmes, contractors and dealers in India and international markets.
What information is needed for a quotation?
For a quotation on the latrine slab mould, send the number of moulds, the delivery destination and any related items such as plastic squatting plates or superstructure kits through the contact page, so everything can be quoted together.
Request a Quote
Request pricing for the Mould Plastic for Concrete Latrine Slab through the contact page, or add it to the enquiry cart with other sanitation items on your list.
Last updated: 24 September 2026
Latrine Superstructure Single Cubicle
Latrine Superstructure Single Cubicle (Product Code: SLE/SAH/16) is a complete latrine cabin kit used to enclose one latrine stance built on a standard 120 cm x 80 cm squatting plate in emergency and institutional sanitation. The kit forms a superstructure with a lockable door, roof/cover and natural ventilation, and needs no materials sourced in the country for its initial installation. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a supplier of scientific & laboratory instruments that also sources emergency sanitation kits.
Specifications
| Parameter | Detail |
|---|---|
| Compatible plate | Standard squatting plate of 120 cm x 80 cm |
| Cabins | One (single cubicle, one latrine stance) |
| Components | Superstructure with lockable door, roof/cover and natural ventilation/aeration |
| Deployment | For example with trench latrine installations or with single slabs |
| Completeness | Complete and ready to install; no materials to be sourced in country for the initial installation (the design may allow later repairs with locally available materials) |
| Construction | Lightweight, rigid, durable and sturdy; climatically stable |
| Designed to withstand | Heat, wind (including stronger windy conditions), dust, rain and manual cleaning |
| Assembly | Easy to assemble into a stable and durable installation |
| Typical settings | Family or communal latrines, health centres, feeding centres, schools |
| Product code | SLE/SAH/16 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Single-Cubicle Latrine Superstructure Used For?
A latrine is only used consistently when people feel safe and have privacy. This kit turns an open squatting plate into an enclosed cabin: the walls and roof give shelter from sun and rain, the lockable door gives users privacy and security, and natural ventilation lets air move through the cubicle to reduce odour and humidity.
The single-cabin format suits a family latrine, a stand-alone latrine at a health or feeding centre, or a row of stances over a trench where each cabin is set up separately. Assemble it directly over the 120 x 80 cm plate on firm ground, check that the door locks and closes properly, and include the cabin in routine cleaning, since it is built to tolerate manual cleaning.
What to Specify When Ordering
- Number of cabins — one kit per latrine stance to be enclosed.
- Whether squatting plates of 120 cm x 80 cm are needed with the kits.
- Single-cubicle kits, double-cubicle kits, or a mix of both.
- Whether any latrines need the add-on kit for children and people with disabilities.
Supplier
Jain Scientific Equipments Private Limited trades as ScienceLab and operates from Ambala, Haryana. The company supplies this cabin kit, together with plates, pans and hygiene items, to emergency programmes, institutions and dealers in India and international markets. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). Company background is on the ScienceLab profile.
Related Water, Sanitation & Hygiene Supplies
Items that work with the single-cubicle superstructure:
- Latrine Superstructure Double Cubicle — the two-cabin version for blocks of two stances.
- Squatting Plate, Plastic, W/o pan, 120x80cm — a plastic plate in the size this cabin is designed around.
- Latrine Add-On Child and Disabled People — an elevated seat kit to improve access in selected latrines.
- Torch Handheld Self-Powered — a wind-up torch that helps users reach the latrine safely after dark.
View the whole Water, Sanitation & Hygiene Supplies category.
Frequently Asked Questions
What is included in the Latrine Superstructure Single Cubicle kit?
The Latrine Superstructure Single Cubicle kit forms one cabin with a lockable door, roof/cover and natural ventilation. It is described as complete and ready to install. The squatting plate is not listed as part of the kit, so order plates separately if you need them.
Which squatting plate does the single-cubicle superstructure fit?
The Latrine Superstructure Single Cubicle is designed for use with a standard squatting plate of 120 cm x 80 cm. If your site uses another slab size, send us its dimensions before ordering so compatibility can be discussed.
Can the single-cubicle superstructure be used on trench latrines?
Yes. The Latrine Superstructure Single Cubicle is intended for deployment with trench latrine installations as well as with single slabs. Order one kit for each stance to be enclosed, or use the double-cubicle kit where stances are built in pairs.
How does the cabin kit cope with weather?
The single-cubicle cabin is designed to be lightweight yet rigid, climatically stable and resistant to heat, wind (including stronger windy conditions), dust, rain and manual cleaning. A specific wind-load rating is not stated, so ask us if your site needs one.
Does installation need any local materials?
No. The Latrine Superstructure Single Cubicle kit is meant to need no materials sourced in the country for its initial installation. Its design may allow later repairs with locally available materials, which helps keep latrines in use over a longer period.
Who supplies the Latrine Superstructure Single Cubicle?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies the Latrine Superstructure Single Cubicle to programmes, institutions and dealers. Share quantity and destination on the contact page for a quotation.
Request a Quote
Send the number of cabins, plate requirements and delivery destination through the contact page, or add this kit to the enquiry cart with your other sanitation items.
Last updated: 24 September 2026
Latrine Superstructure Double Cubicle
Latrine Superstructure Double Cubicle (Product Code: SLE/SAH/17) is a latrine cabin kit used to build a block of two latrine stances over standard 120 cm x 80 cm squatting plates in emergency and communal sanitation. It forms a double superstructure with a lockable door for each cabin, a roof/cover and natural ventilation, and is intended for deployment with installations such as trench latrines. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which also handles school lab equipment bulk supply for institutions.
Specifications
| Parameter | Detail |
|---|---|
| Compatible plates | Standard squatting plates of 120 cm x 80 cm |
| Cabins | Two (double cubicle, a block of two latrine stances) |
| Components | Double superstructure with lockable doors, roof/cover and natural ventilation/aeration |
| Deployment | Complete latrine cabin kit, for example with trench latrine installations |
| Assembly | Easy to assemble into a stable and durable installation in emergencies |
| Typical settings | Communal latrines, health centres, feeding centres, schools |
| Product code | SLE/SAH/17 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Double-Cubicle Latrine Superstructure Used For?
Communal sites such as camps, schools, health centres and feeding centres usually need latrines built in groups rather than one by one. This kit encloses two stances in a single block, so teams erect fewer separate structures while every user still gets a private cubicle with its own lockable door. A two-cabin block also makes it easy to allocate cubicles to different user groups where a site plan calls for that.
On a trench latrine, set the block over two 120 x 80 cm plates placed side by side on firm ground, then assemble walls, doors and roof following the kit layout. Keep the ventilation openings clear, check both door locks after assembly, and plan a handwashing point close to the block so users can wash their hands on the way out.
What to Specify When Ordering
- Number of double blocks — each block covers two stances.
- Whether two squatting plates of 120 cm x 80 cm per block are needed as well.
- Any single-cubicle kits for an odd number of stances.
- Whether accessibility add-on kits are needed for selected cubicles.
Supplier
This double-cubicle kit is supplied by Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, of Ambala, Haryana. The company puts together sanitation orders — cabin kits, plates, pans and hygiene consumables — for programmes, schools and dealers in India and international markets. Learn more on the ScienceLab company profile.
Related Water, Sanitation & Hygiene Supplies
Other items for a communal latrine block:
- Latrine Superstructure Single Cubicle — the one-cabin kit for single stances or odd numbers.
- Squatting Plate, Plastic, W/o pan, 120x80cm — plates in the size this block is built around; two are needed per block.
- Latrine Add-On Child and Disabled People — an elevated seat kit for an accessible cubicle.
- Sprayer Trigger Bottle Handheld 1 Liter — a chlorine-appropriate sprayer for cleaning cubicle surfaces.
Browse all Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
How many latrine stances does the Latrine Superstructure Double Cubicle cover?
The Latrine Superstructure Double Cubicle covers two latrine stances. It forms a block of two cabins, each with a lockable door, plus a roof/cover and natural ventilation, and is intended for standard 120 cm x 80 cm squatting plates.
Are squatting plates included with the double-cubicle kit?
Squatting plates are not listed as part of the Latrine Superstructure Double Cubicle kit. Two plates of 120 cm x 80 cm are needed per block, and they can be ordered from us at the same time if required.
Where is the double-cubicle latrine superstructure typically used?
The double-cubicle latrine superstructure is intended for communal latrines, health centres, feeding centres and schools, typically deployed with trench latrine installations during emergencies, where latrines are built in groups rather than individually.
What is the difference between the single and double cubicle kits?
The Latrine Superstructure Double Cubicle encloses two stances in one block, while the single-cubicle kit encloses one. Both are for 120 cm x 80 cm plates and have lockable doors, roof and ventilation; the double suits communal blocks, the single suits family or stand-alone latrines.
Who supplies the Latrine Superstructure Double Cubicle?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies the Latrine Superstructure Double Cubicle to emergency programmes, schools, institutions and dealers in India and international markets.
What details should a quotation request include?
For a double-cubicle superstructure quotation, give the number of blocks, whether plates and accessibility add-ons are needed, and the delivery destination. Send these through the contact page so the full latrine package can be priced together.
Request a Quote
Ask for pricing on the Latrine Superstructure Double Cubicle via the contact page, or collect it in the enquiry cart with plates and other sanitation items.
Last updated: 24 September 2026
Latrine Add-On Child and Disabled People
Latrine Add-On Child and Disabled People (Product Code: SLE/SAH/18) is an accessibility kit used to make a standard 120 cm x 80 cm squatting plate easier to use for children and for adults with disabilities in emergency and community sanitation. It consists of an elevated toilet seat with a support frame that can bear a person's weight during independent or assisted transfer, for example from a wheelchair. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a school laboratory equipment supplier in India that also sources inclusive sanitation items.
Specifications
| Parameter | Detail |
|---|---|
| Compatible plate | Standard squatting plate of 120 cm x 80 cm; one kit is installed on one plate |
| Components | Elevated toilet seat with support frame |
| Support frame | Capable of supporting the weight of a person during independent or assisted transfer to and from the seat (for example from a wheelchair) |
| Intended users | Children, and adults with disabilities, particularly those with mobility difficulties |
| Settings | Family or communal latrine slabs; health centres, feeding centres, temporary learning centres, schools and child friendly spaces |
| Assembly | Easy to assemble into a stable and durable installation for one latrine in emergencies |
| Superstructure note | Latrines selected for the add-on should have a superstructure wide enough for a wheelchair user to enter and manoeuvre |
| Product code | SLE/SAH/18 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Latrine Add-On Kit Used For?
Squatting over a drop hole can be difficult or impossible for people with mobility difficulties, and a standard plate can feel unsafe to small children. This kit places a raised seat over the squatting plate so users can sit instead of squat, while the support frame gives them something firm to hold and lean on as they move between a wheelchair and the seat, alone or with a helper.
Programmes usually fit the add-on to selected latrines in each block rather than every stance. Choose cubicles with enough width for a wheelchair to enter and turn, keep the approach path level and clear, and check that the seat and frame are firmly assembled before the latrine is opened. Asking the intended users for feedback after installation helps confirm that the arrangement works for them.
What to Specify When Ordering
- Number of kits — one for each latrine to be made accessible.
- Confirmation that the latrines use 120 cm x 80 cm squatting plates.
- Superstructure for those latrines, and whether its width suits wheelchair users (ask us for cabin details).
- Main user groups — children, adults with disabilities or both — so we can discuss the kit offered.
Supplier
Jain Scientific Equipments Private Limited supplies this add-on kit under its ScienceLab trading name from Ambala, Haryana. It can be sourced together with plates and cabin kits, helping programmes, schools and dealers in India and international markets plan inclusive latrines in one order. Read about the company on the ScienceLab profile page.
Related Water, Sanitation & Hygiene Supplies
Items used with the accessibility add-on:
- Squatting Plate, Plastic, W/o pan, 120x80cm — a plate in the size the add-on is designed for.
- Latrine Superstructure Single Cubicle — a one-cabin kit for a stand-alone accessible latrine.
- Latrine Superstructure Double Cubicle — a two-cabin block where one cubicle can take the add-on.
- Child Potty — for the youngest children who are not yet using a latrine seat.
See the full Water, Sanitation & Hygiene Supplies range.
Frequently Asked Questions
What does the Latrine Add-On Child and Disabled People kit include?
The Latrine Add-On Child and Disabled People kit is made up of an elevated toilet seat with a support frame. The squatting plate and superstructure are not listed as part of the kit and are ordered separately if needed.
Which squatting plate does the latrine add-on kit fit?
The latrine add-on kit is designed for a standard squatting plate of 120 cm x 80 cm, and one kit is installed on one plate. If your latrines use a different slab, send us its size before ordering so the fit can be discussed.
Can a wheelchair user transfer onto the add-on seat?
Yes, that is its purpose. The support frame of the Latrine Add-On Child and Disabled People kit is designed to carry a person's weight during independent or assisted transfer to and from the seat, such as from a wheelchair. A maximum load figure is not stated, so ask us if you need one.
Where is the latrine add-on kit typically used?
The latrine add-on kit is used with family or communal latrine slabs and in health centres, feeding centres, temporary learning centres, schools and child friendly spaces, particularly during emergencies where accessible latrines must be set up quickly.
Does the latrine need a wider superstructure?
Yes. Latrines chosen for the Latrine Add-On Child and Disabled People kit should have a superstructure wide enough for a wheelchair user to enter and manoeuvre. Ask us for cabin dimensions when planning which cubicles will receive the kit.
Who supplies the Latrine Add-On Child and Disabled People kit?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies this latrine add-on kit. Send the quantity, plate size and delivery destination through the contact page for a quotation.
Request a Quote
Request a price for the Latrine Add-On Child and Disabled People kit on the contact page, or add it to the enquiry cart with plates and superstructures for your accessible latrines.
Last updated: 24 September 2026
Sprayer Trigger Bottle Handheld 1 Liter
Sprayer Trigger Bottle Handheld 1 Liter (Product Code: SLE/SAH/19) is a hand-operated plastic trigger sprayer used to apply disinfectant solutions to surfaces in health centres, schools, latrines and other shared spaces. With a 1 litre operating capacity, it is chemically resistant, appropriate for chlorine solutions and fitted with a filter that protects the nozzle. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab consumables supplier in India whose range includes hygiene and cleaning tools.
Specifications
| Parameter | Detail |
|---|---|
| Operating capacity | 1 litre |
| Operation | Hand-held, hand-operated trigger sprayer |
| Construction | Plastic bottle with trigger sprayer; handheld, sturdy and stable type |
| Chemical resistance | Chemically resistant; appropriate for chlorine solutions |
| Nozzle protection | Filter fitted to protect the sprayer nozzle |
| Volume marking | Clear, permanent horizontal line showing the maximum liquid volume; further marks for lower volume graduations preferred |
| Intended use | Surface disinfection |
| Product code | SLE/SAH/19 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the 1 Litre Trigger Sprayer Used For?
Cleaning teams use this sprayer to wet frequently touched surfaces — latrine slabs and door handles, tables, bed frames, handwashing stations — with a disinfectant solution before wiping or leaving it for the contact time given in their guidance. Because it resists chlorine, it can be filled with the chlorine solutions commonly used in health centres, isolation areas and emergency sanitation, at whatever strength your health guidance specifies.
For safe use, never fill above the maximum line, label each bottle with the solution it holds, and prepare chlorine solution as often as your protocol requires. After each shift, rinse the nozzle and filter with clean water so they do not clog, and store bottles away from direct sunlight and out of the reach of children.
What to Specify When Ordering
- Number of sprayers — for example one per cleaner or per ward, classroom or latrine block.
- Whether larger-area spraying needs compression sprayers as well.
- Any disinfectant, wipes or cloths to be quoted with the sprayers (the sprayer is supplied empty).
Supplier
The handheld trigger sprayer is supplied by Jain Scientific Equipments Private Limited, which does business as ScienceLab from Ambala, Haryana. Health programmes, schools, institutions and dealers in India and international markets can source it together with cleaning cloths, sanitation items and other hygiene supplies. See the ScienceLab company profile for more about us.
Related Water, Sanitation & Hygiene Supplies
Items that complete a surface-disinfection routine:
- Sprayer Compression Type 11.35 Litres — a pump-up sprayer for larger areas and longer spraying runs.
- Multipurpose Cloth Cotton 1x1.5m — a cotton cloth that can be cut for wiping surfaces after spraying.
- Universal Disinfectant Wipes — ready-to-use wipes for small surfaces between spraying rounds.
- Classroom Cleaning & Sanitization Kit — a combined kit for routine school cleaning.
Find more cleaning and hygiene items in Water, Sanitation & Hygiene Supplies.
Frequently Asked Questions
What is the capacity of the Sprayer Trigger Bottle Handheld 1 Liter?
The Sprayer Trigger Bottle Handheld 1 Liter has an operating capacity of 1 litre. The bottle carries a clear, permanent horizontal line marking the maximum liquid volume, and further marks for smaller volume graduations are preferred so users can measure partial fills.
Can the 1 litre trigger sprayer be used with chlorine solutions?
Yes. The 1 litre trigger sprayer is chemically resistant and appropriate for chlorine solutions used in surface disinfection. The sprayer is supplied empty; prepare the chlorine solution at the strength set by your health or infection-prevention guidance.
What does the filter on the trigger sprayer do?
The filter on the Sprayer Trigger Bottle Handheld 1 Liter protects the nozzle from particles that could block the spray. Rinsing the filter and nozzle with clean water after use helps keep the spray pattern even and the trigger working smoothly.
What is the trigger sprayer made of?
The trigger sprayer consists of a plastic bottle with a trigger spray head, built as a sturdy, stable handheld unit. The exact plastic grade is not stated in our listing, so ask us for material details of the model quoted if your protocol requires them.
Who supplies the Sprayer Trigger Bottle Handheld 1 Liter?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies the Sprayer Trigger Bottle Handheld 1 Liter to health programmes, schools, institutions and dealers in India and international markets.
How do I request a quotation for trigger sprayers?
To get a quotation for the 1 litre trigger sprayer, send the quantity, delivery destination and any related items such as cloths or compression sprayers through the contact page, so they can be priced in one quote.
Request a Quote
Ask for pricing on the Sprayer Trigger Bottle Handheld 1 Liter through the contact page, or add it to the enquiry cart with your other cleaning and hygiene supplies.
Last updated: 24 September 2026
Sprayer Compression Type 11.35 Litres
Sprayer Compression Type 11.35 Litres (Product Code: SLE/SAH/20) is a hand-operated compression sprayer used to apply chlorine solutions, pesticides and insecticides over larger areas in health, sanitation and vector-control work. It holds approximately 11.35 litres, works at an operation pressure of 4 bar and comes with an air pressure gauge, relief valve, lance and trigger valve with lock-off. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which pairs lab equipment export from India with sourcing of public-health equipment such as this sprayer.
Specifications
| Parameter | Detail |
|---|---|
| Capacity | 11.35 litres (approximately) |
| Operation | Hand-operated compression sprayer |
| Applications | Chlorine, pesticide and insecticide spraying |
| Operation pressure | 4 bar (unless otherwise specified) |
| Maximum filled weight | Not more than 25 kg when filled to the maximum recommended capacity |
| Tank | Cylindrical |
| Filler opening | Fitted with a filter; not less than 90 mm across the minor axis |
| Air pump | Hand operated, with two-handed handle and a locking device separate from the tank lid |
| Safety devices | Pressure release safety device and pressure relief (safety) valve |
| Pressure indication | Air pressure gauge |
| Shut-off valve | Keeps the tank pressurised if the hose and discharge set are removed |
| Hose | Attached at the top of the tank to a dip tube |
| Discharge set | Trigger valve with locking-off device, lance, control flow valve and nozzle |
| Lance storage | System for hanging the lance when the sprayer is not in use |
| Product code | SLE/SAH/20 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Compression Sprayer Used For?
Health and sanitation teams use this sprayer where a hand bottle is too small: disinfecting floors, walls and latrine blocks with chlorine solution in treatment centres and camps, or applying pesticides and insecticides for pest and vector control. The operator fills the tank through the filtered opening, closes the lid, pumps with the two-handed handle until the gauge shows the working pressure, then sprays with the trigger valve while the flow valve and nozzle control the output.
Good practice is to keep separate, clearly labelled sprayers for chlorine and for pesticides, and to wear the protective equipment named on the chemical's label. Always release the pressure with the safety device before opening the tank, rinse the tank, hose and nozzle with clean water after each job, and hang the lance on its holder so it is not damaged in storage.
What to Specify When Ordering
- Number of sprayers, and whether they are for chlorine, pesticide/insecticide or both (separate units advised).
- Operation pressure if your programme specifies something other than 4 bar.
- Whether spare nozzles or other parts are needed — ask us what can be offered.
- Delivery destination, within India or for export.
Supplier
ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, supplies this compression sprayer to health programmes, municipal and institutional buyers and dealers in India and international markets. For vendor registration and export paperwork, the supplying company is Jain Scientific Equipments Private Limited (IEC AAECJ8618A, GSTIN 06AAECJ8618A1ZT). More background is on the ScienceLab company profile.
Related Water, Sanitation & Hygiene Supplies
Items used with the compression sprayer in cleaning and disinfection work:
- Sprayer Trigger Bottle Handheld 1 Liter — a chlorine-appropriate hand sprayer for small surfaces and spot cleaning.
- Universal Disinfectant Spray — a ready-to-use spray for quick jobs where mixing a solution is not practical.
- Multipurpose Cloth Cotton 1x1.5m — cotton cloth for wiping down sprayed surfaces.
- Garbage Bags, 100 liters — for collecting waste removed during cleaning rounds.
Browse the complete Water, Sanitation & Hygiene Supplies category.
Frequently Asked Questions
What is the capacity of the Sprayer Compression Type 11.35 Litres?
The Sprayer Compression Type 11.35 Litres holds approximately 11.35 litres. Its total weight must not exceed 25 kg when filled to the maximum recommended capacity, which keeps it manageable for an operator carrying it during spraying.
What pressure does the compression sprayer work at?
The compression sprayer has an operation pressure of 4 bar unless otherwise specified. An air pressure gauge shows the tank pressure, and a pressure relief (safety) valve plus a pressure release safety device protect against over-pressure and allow safe opening.
What parts come with the 11.35 litre compression sprayer?
The 11.35 litre compression sprayer includes a cylindrical tank, hand air pump with two-handed handle and locking device, safety and relief valves, air pressure gauge, shut-off valve, hose with dip tube, trigger valve with lock-off, lance, control flow valve, nozzle and a lance hanging system.
Can one compression sprayer be used for both chlorine and pesticides?
The Sprayer Compression Type 11.35 Litres is intended for chlorine, pesticide and insecticide applications. To avoid mixing chemical residues, it is good practice to dedicate and label separate sprayers for chlorine and for pesticides, and to rinse each thoroughly after use.
Is a calibration certificate available for the pressure gauge?
Our listing for the compression sprayer does not mention a calibration certificate for its air pressure gauge. If your programme needs gauge documentation, please raise it through the contact page before ordering so it can be discussed.
Who supplies the Sprayer Compression Type 11.35 Litres?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies the Sprayer Compression Type 11.35 Litres to health programmes, institutions and dealers, with vendor registration details available for procurement files.
Request a Quote
Send the quantity, intended chemical use and delivery destination for the Sprayer Compression Type 11.35 Litres through the contact page, or add it to the enquiry cart with related hygiene supplies.
Last updated: 24 September 2026
