- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Mould Plastic for Concrete Latrine Slab
Mould Plastic for Concrete Latrine Slab (Product Code: SLE/SAH/15) is a polymeric form used to cast concrete latrine slabs on site for household, school and community sanitation. Made of UV-protected, impact-resistant polymer 4 mm thick with a very smooth finish, it produces a slab of 60 x 60 cm, around 8 cm thick, with two raised foot rests and a child-safe drop hole. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, whose scientific equipment bulk supply work extends to sanitation items like this mould.
Specifications
| Parameter | Detail |
|---|---|
| Type | Polymeric (plastic) form for casting a concrete latrine slab |
| Mould material | High-quality polymers with a very smooth finish; UV protected and impact resistant |
| Mould material thickness | 4 mm |
| Field use | Able to stand rough handling under field conditions |
| Finished slab size | 60 x 60 cm (horizontal dimensions) |
| Finished slab thickness | Around 8 cm |
| Slab features | Two raised foot rests; drop hole dimensioned to be safe for small children; surfaces sloping towards the drop hole for easy cleaning |
| Product code | SLE/SAH/15 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
What Is the Latrine Slab Mould Used For?
The mould lets sanitation teams, masons and community groups make concrete latrine slabs close to where they are needed, using locally available cement and aggregate instead of transporting finished slabs. Concrete is placed in the form, compacted and left to cure; once released, the slab already has its foot rests, drop hole and cleaning slope moulded in, so every slab from the same mould comes out consistent.
Because a mould is used again and again, durability matters: this one is UV protected and built to stand rough field handling. Practical tips: work on level ground, clean the form after every casting so the smooth finish transfers to the next slab, and follow local engineering guidance on concrete mix, any reinforcement and curing time before slabs are placed over pits.
What to Specify When Ordering
- Number of moulds, based on how many slabs your teams plan to cast at the same time.
- Confirmation that a 60 x 60 cm slab, around 8 cm thick, suits your pit openings.
- Whether ready-made plastic squatting plates are also needed for immediate use while slabs cure.
Supplier
The mould is supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, from Ambala in Haryana. Sanitation programmes, contractors and dealers can source it alongside other latrine components and hygiene supplies, for delivery in India and international markets. More about the company is on the ScienceLab profile page.
Related Water, Sanitation & Hygiene Supplies
Other items often ordered with a latrine slab mould:
- Squatting Plate, Plastic, W/o pan, 120x80cm — a ready-made plastic plate for latrines that must open before cast slabs are ready.
- Latrine Superstructure Single Cubicle — a lockable cabin kit designed for standard 120 x 80 cm plates.
- Sprayer Trigger Bottle Handheld 1 Liter — for disinfecting latrine slab surfaces during routine cleaning.
- Child Potty — for young children who are not yet using a latrine.
Explore the full Water, Sanitation & Hygiene Supplies range.
Frequently Asked Questions
What size slab does the Mould Plastic for Concrete Latrine Slab produce?
The Mould Plastic for Concrete Latrine Slab produces a finished slab of 60 x 60 cm with a thickness of around 8 cm. Each slab has two raised foot rests, a drop hole dimensioned to be safe for small children and surfaces that slope towards the hole for easy cleaning.
How durable is the latrine slab mould?
The latrine slab mould is made of high-quality polymers 4 mm thick that are UV protected and impact resistant, and it is designed to stand rough handling under field conditions. The number of castings per mould is not stated, so ask us if you need that for planning.
Is concrete or reinforcement included with the mould?
No. The Mould Plastic for Concrete Latrine Slab is listed as the plastic form only. Cement, aggregate, any reinforcement and a release agent are sourced locally, and the concrete mix should follow your engineering team's guidance for latrine slabs.
Why cast concrete slabs instead of using plastic plates?
Casting slabs with this mould lets local teams produce latrine slabs near the site from local materials once a programme is established, while plastic squatting plates are quicker to deploy in the first days. Many buyers use both, depending on the stage of the response.
Who supplies the Mould Plastic for Concrete Latrine Slab?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab from Ambala, Haryana, India, supplies the Mould Plastic for Concrete Latrine Slab to sanitation programmes, contractors and dealers in India and international markets.
What information is needed for a quotation?
For a quotation on the latrine slab mould, send the number of moulds, the delivery destination and any related items such as plastic squatting plates or superstructure kits through the contact page, so everything can be quoted together.
Request a Quote
Request pricing for the Mould Plastic for Concrete Latrine Slab through the contact page, or add it to the enquiry cart with other sanitation items on your list.
Last updated: 24 September 2026
