Pump Electric sbmr bh 18cbm/hr (Product Code: SLE/PRP/02) is a complete electric submersible borehole pump used to lift clean, non-aggressive groundwater from boreholes into tanks and water supply systems. Rated in its name at 18 cubic metres per hour, it runs on a directly coupled 3-phase 380/400 V, 50 Hz submersible motor of up to 7.5 kW, with stainless steel hydraulics and built-in dry-running protection. The pump is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is an Electric Submersible Borehole Pump Used For?

A submersible borehole pump sits down the borehole below the water level and pushes water up the rising main to an elevated tank, a distribution network or a water point. It suits piped water schemes for villages, schools, health centres and small towns wherever a 3-phase supply or a suitable generator is available, and it avoids the suction-lift limits of a surface pump.

Because the pump is meant for non-aggressive water without solid particles, develop the borehole and clear sand before installation, and keep the pump clear of the bottom of the hole. Set the level relay electrodes of the dry-running protection above the pump intake so the motor stops before the water falls too low. A qualified electrician should connect the 3-phase supply and check the direction of rotation at start-up.

What to Specify When Ordering

• The power available at site: 380 V or 400 V, 50 Hz, 3-phase
• Borehole depth, water levels and delivery head, so suitability can be checked
• The motor cable length needed to reach your control point
• Quantity and delivery location

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies this submersible borehole pump from Ambala, Haryana, as sourced water-supply equipment. Water utilities, WASH programmes, drilling contractors, NGOs and distributors can request it together with handpumps, fittings and other water supply items for India and international markets. More about the company appears on the ScienceLab profile page.

Related Water, Sanitation & Hygiene Supplies

Pumps and pipework used alongside a borehole pump in water supply schemes:

• Pump Centrifugal, Diesel 50cbm/hr — a surface pump for high-volume transfer without grid power.
• Dewatering Pump, 11-22 cbm/hr@50m TMH — another pump in the range, rated 11–22 cbm/hr at 50 m head.
• Handpump SS-Riser 32ND — a manual borehole pump where power is not available.
• Handpump DA 9-15m Variant — another handpump option for community water points.
• Union Equal PVC, fxf, scj 10Bar 110mm OD-P — a PVC union for delivery pipework.

Browse the complete Water, Sanitation & Hygiene Supplies category.

Frequently Asked Questions

What does sbmr bh mean in Pump Electric sbmr bh 18cbm/hr?
In Pump Electric sbmr bh 18cbm/hr, "sbmr bh" is short for submersible borehole, and 18cbm/hr is the rated flow of 18 cubic metres per hour given in the product name. It is a complete electric pump designed to work down a borehole.

What power supply does the submersible borehole pump need?
The submersible borehole pump uses a 3-phase submersible motor for a 380 V/400 V, 50 Hz, 3-phase supply, with a motor rating of up to 7.5 kW. A single-phase version is not listed, so confirm your site power with us before ordering.

What water can the 18 cbm/hr submersible pump handle?
The 18 cbm/hr submersible pump is intended for non-aggressive water without solid particles. Sandy or corrosive water can shorten the life of pumps like this, so boreholes should be developed and cleared of sand, and the water quality checked, before installation.

How is the borehole pump protected against running dry?
Pump Electric sbmr bh 18cbm/hr has a built-in dry-running protection device, including level relay electrodes, that stops the motor when the water level drops too far. Its stator winding is hermetically enclosed in stainless steel, and the enclosure class is IP 58.

What is included with Pump Electric sbmr bh 18cbm/hr?
Pump Electric sbmr bh 18cbm/hr is a complete pump and motor unit with a priming screw, top non-return valve, bottom inlet strainer, water-lubricated bearings and motor cable. Rising main pipe, control panel and other installation items are not listed, so ask us about them.

Who supplies Pump Electric sbmr bh 18cbm/hr?
Pump Electric sbmr bh 18cbm/hr is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, as sourced water-supply equipment. Utilities, WASH programmes, drilling contractors and distributors in India and international markets can request a quotation through the contact page.

Request a Quote

To price Pump Electric sbmr bh 18cbm/hr, send your site power, borehole details and cable length via the ScienceLab contact page, or add the pump to the enquiry cart with pipe fittings and other WASH supplies.

Last updated: 24 September 2026

Handpump Variant 3 Norm (Product Code: SLE/PRP/03) is a hand pump package with hot-dip galvanized above-ground equipment used to lift groundwater from boreholes at community water points, schools and field water-supply projects. Water, sanitation and hygiene (WASH) teams choose this variant when they plan to fit 65 mm nominal-diameter riser pipes with stainless steel couplings and stainless steel pump rods, which are ordered separately. The package is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Handpump Variant 3 Used For?

A hand pump of this kind lets people draw water from a borehole by working a handle at the pump head. The handle moves a string of pump rods, which drives a piston inside the cylinder at the bottom of the rising main and pushes water up the riser pipe to the spout. The Variant 3 Norm package provides the parts that sit on and above the well head — the galvanized head assembly, the water tank and the Normal Stand — so a project team can combine it with riser and rod lengths chosen for each borehole.

An open top cylinder is generally selected so the piston can be drawn up through the riser main for servicing without pulling every pipe out of the well, which suits water points looked after by local caretakers. Before installation, confirm the borehole depth and water level, the number of 65 mm riser lengths and stainless steel rods needed, and the platform design used at the site.

What to Specify When Ordering

• Number of Handpump Variant 3 Norm packages (one per borehole or water point).
• Borehole depth and planned cylinder setting, so riser pipe and rod quantities can be worked out.
• Riser pipes: 65 mm ND with stainless steel couplings, ordered as a separate line.
• Pump rods: stainless steel connecting rods with threaded couplers, ordered as a separate line.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies this hand pump package from Ambala, Haryana, India. Alongside its work as a laboratory equipment supplier in India, the company sources water-supply hardware such as hand pumps, riser sets and pipe fittings for schools, institutions, NGOs and project buyers in India and international markets. It sources this pump rather than producing it, and handles the enquiry, quotation and dispatch. Company background is on the ScienceLab company profile page.

Related Water, Sanitation & Hygiene Supplies

These items from the same range are often considered alongside a hand pump package when planning a water point:

• Handpump SS-Riser 32ND — stainless steel riser pipe and connecting rod lengths for hand pumps built around 32 mm risers; compare riser sizes before ordering.
• Handpump DA 9-15m Variant — a direct action PVC hand pump set for shallow wells.
• Pump Electric sbmr bh 18cbm/hr — a powered borehole option where electricity is available.
• Pump Centrifugal, Diesel 50cbm/hr — an engine-driven pump for moving larger volumes of water.

See the full Water, Sanitation & Hygiene Supplies range.

Frequently Asked Questions

What is included in the Handpump Variant 3 Norm package?
The Handpump Variant 3 Norm package covers the hot-dip galvanized above-ground equipment — head assembly, water tank and Normal Stand — adapted for 65 mm riser pipes and fitted with an open top cylinder. Riser pipes and connecting rods are not part of the package and are ordered separately.

Which riser pipes and rods fit the Handpump Variant 3 Norm?
The Handpump Variant 3 Norm is described for use with 65 mm nominal-diameter riser pipes joined by stainless steel couplings, together with stainless steel connecting (pump) rods that have threaded couplers. Ask us to include matching riser and rod lengths in the same quotation.

How many riser pipes and rods does one Handpump Variant 3 Norm need?
The number of riser pipes and rods for a Handpump Variant 3 Norm depends on the depth at which the cylinder is set in each borehole, so there is no fixed count. Share the borehole depth and water level through our contact page and we will work out the lengths with you.

Why is the Handpump Variant 3 Norm hot-dip galvanized?
Hot-dip galvanizing gives the steel parts of the Handpump Variant 3 Norm a zinc coating, a common way to slow rusting on equipment that stands outdoors and is splashed with water every day. Keeping the pump surroundings clean and drained also helps the finish last longer.

Who supplies the Handpump Variant 3 Norm?
The Handpump Variant 3 Norm is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. The company sources the pump package and handles quotations, paperwork and dispatch for buyers in India and international markets.

What does a quotation for the Handpump Variant 3 Norm need?
A quotation for the Handpump Variant 3 Norm needs the number of pumps, the borehole depths, whether riser pipes and stainless steel rods should be priced with it, and the delivery destination. Add the item to the enquiry cart or send these details through the contact page.

Request a Quote

To price the Handpump Variant 3 Norm for a school, community or field project, send your quantities and borehole details through the contact page or add the item to the enquiry cart. ScienceLab replies with a quotation for supply within India and to international markets.

Last updated: 24 September 2026

Handpump SS-Riser 32ND (Product Code: SLE/PRP/04) is a 3-metre stainless steel riser pipe of 32 mm nominal diameter, paired with one stainless steel connecting rod, used to build the rising main and rod string of a hand pump installed in a borehole or well. Drilling contractors and water-supply programmes order it length by length, because every riser pipe comes with its own 10.8 mm diameter rod. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the SS Riser Pipe and Rod Set Used For?

In a lever-type hand pump, the riser pipes form the column that carries water from the cylinder up to the pump head, while the connecting rods inside that column transfer the handle's up-and-down movement to the piston. The Handpump SS-Riser 32ND provides both parts in matching 3-metre lengths, so the installer screws one pipe onto the coupling of the last and joins the rods through their M12 threads as the string is lowered.

Keep the HDPE thread protectors in place until each pipe is about to be joined, because damaged threads are a common cause of leaking joints. Lay pipes and rods on clean supports rather than bare ground during installation, and count the lengths against the planned cylinder depth before the crew goes to site.

What to Specify When Ordering

• Number of riser sets, based on the cylinder setting depth divided by the 3-metre length of each set.
• The hand pump model the sets will be used with, so the 32 mm riser and M12 rod threads can be checked against it.
• Number of boreholes or water points to be equipped.

Supplier

These stainless steel riser sets are supplied by Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, from Ambala in Haryana, India. The company sources rising-main components and other water-point hardware for contractors, NGOs, schools and institutional buyers, and co-ordinates quotations and dispatch within India and to international markets. More about the company is on the ScienceLab profile page.

Related Water, Sanitation & Hygiene Supplies

Other water-supply items in the same range that buyers compare when planning hand pump installations:

• Handpump Variant 3 Norm — a galvanized above-ground pump package described for 65 mm risers; check riser size compatibility first.
• Handpump DA 9-15m Variant — a direct action pump set that uses a PVC riser main instead of steel.
• Pump Electric sbmr bh 18cbm/hr — an electric borehole pump for sites with a power supply.

Browse the complete Water, Sanitation & Hygiene Supplies category.

Frequently Asked Questions

What comes with each Handpump SS-Riser 32ND?
Each Handpump SS-Riser 32ND consists of one 3-metre stainless steel riser pipe of 32 mm nominal diameter, with a female threaded coupling on one end and an HDPE thread protector on the other, plus one 3-metre stainless steel 304 connecting rod of 10.8 mm diameter.

What thread does the Handpump SS-Riser 32ND connecting rod use?
The connecting rod of the Handpump SS-Riser 32ND has an M12 rolled male thread at one end and an M12 stainless steel female threaded coupling welded at the other, so successive rods screw directly into one another as the rod string is assembled.

How many Handpump SS-Riser 32ND sets does a borehole need?
The number of Handpump SS-Riser 32ND sets equals the cylinder setting depth divided by 3 metres, rounded up, because each set adds one 3-metre pipe and one 3-metre rod. Confirm the final count against the pump maker's installation drawing for that borehole.

Does the Handpump SS-Riser 32ND fit the Handpump Variant 3 Norm?
Not as described: the Handpump SS-Riser 32ND is a 32 mm nominal-diameter riser, while the Handpump Variant 3 Norm is described for a larger riser pipe size. Tell us the pump model you are using through the contact page and we will check which riser set applies.

Why are the Handpump SS-Riser 32ND pipe and rod made of stainless steel?
Stainless steel is widely used for hand pump riser pipes and rods such as the Handpump SS-Riser 32ND because it resists corrosion in groundwater better than plain steel, which helps keep water clear of rust and reduces how often below-ground parts need replacing.

Who supplies the Handpump SS-Riser 32ND?
The Handpump SS-Riser 32ND is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which sources the riser sets and quotes them for project, institutional and export buyers. Send quantities and delivery details through the contact page or the enquiry cart.

Request a Quote

For a price on the Handpump SS-Riser 32ND, list the number of sets and the delivery location on the contact page, or add the item to the enquiry cart together with any pumps from the same range.

Last updated: 24 September 2026

Handpump DA 9-15m Variant (Product Code: SLE/PRP/05) is a direct action (low-lift, shallow-well) hand pump set used to draw water from shallow boreholes at community, school and camp water points. Its specification covers cylinder installation depths of 9 to 12 metres, with a glued (solvent-cemented) PVC riser main, PVC pump rods, well screen, sand trap and installation tools in the set. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Direct Action Handpump Used For?

A direct action hand pump has no lever mechanism: the user lifts and pushes the handle, which moves the pump rod and piston straight up and down inside the cylinder. That makes it well suited to shallow water tables, where the lift is short and the pump can be installed and maintained by a small trained team. The Handpump DA 9-15m Variant arrives as a complete set, from the handle and pump body at the surface down to the well screen and sand trap at the bottom of the borehole.

During installation, the PVC raising mains and pump rods are joined with the supplied solvent cement, the reducers step the casing down to the 48 mm lower casing, and the bottom flange is bolted to a concrete platform around the well head. The two spanners and the retrieving rod stay with the caretaker for routine maintenance of the below-ground parts.

What to Specify When Ordering

• Planned cylinder setting depth for each borehole (the listed specification covers 9 to 12 metres).
• Number of pump rod and raising main lengths needed beyond the standard set for that depth.
• Casing pipe size at the site, so the 89 mm OD reducing socket matches it.
• Number of complete pump sets required.

Supplier

Jain Scientific Equipments Private Limited, known to customers as ScienceLab, supplies this direct action pump set from Ambala, Haryana, India, sourcing it for water-supply projects run by NGOs, contractors, schools and public bodies in India and international markets. For vendor registration, the supplying company's details are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Read more on the ScienceLab profile page.

Related Water, Sanitation & Hygiene Supplies

Compare this shallow-well pump with other water-lifting options in the range:

• Handpump Variant 3 Norm — a galvanized hand pump package for 65 mm riser pipes and stainless steel rods.
• Handpump SS-Riser 32ND — stainless steel riser pipe and rod lengths for steel rising mains.
• Pump Electric sbmr bh 18cbm/hr — an electric borehole pump where mains or generator power is available.
• Pump Centrifugal, Diesel 50cbm/hr — a diesel pump for high-volume surface water transfer.

All water-point items are listed under Water, Sanitation & Hygiene Supplies.

Frequently Asked Questions

What depth is the Handpump DA 9-15m Variant designed for?
The listed specification of the Handpump DA 9-15m Variant covers cylinder installation depths of 9 to 12 metres. For a setting closer to the 15 metres in the product name, confirm the extra pipe and rod lengths with us through the contact page before ordering.

What is included in the Handpump DA 9-15m Variant set?
The Handpump DA 9-15m Variant set includes the handle and pump body assemblies, bottom flange, PVC pump rods and raising mains, piston assembly, cylinder with foot valve, well screen, reducers, lower casing, sand trap, two spanners, a retrieving rod and a bottle of solvent cement.

How are the pipes of the Handpump DA 9-15m Variant joined?
The PVC raising mains and pump rods of the Handpump DA 9-15m Variant have threaded joints that are glued with solvent cement; a 250 ml bottle of cement in an aluminium extruded bottle with PE stopper is part of the set. Joints should be clean and dry before cementing.

How is the Handpump DA 9-15m Variant mounted?
The Handpump DA 9-15m Variant is mounted with a bottom flange assembly, bolts and an intermediate conical flange that bolt onto a concrete platform built around the well head. The concrete platform itself is prepared on site and is not among the listed items.

Which casing does the Handpump DA 9-15m Variant reducer fit?
The reducing socket of the Handpump DA 9-15m Variant has an 88.5 mm inside diameter at the top to fit an 89 mm OD PVC casing pipe, and the cylinder reducer steps down to fit the 48 mm OD PVC lower casing supplied in the set.

Who supplies the Handpump DA 9-15m Variant?
The Handpump DA 9-15m Variant is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. The company sources the pump set and quotes it for WASH projects, contractors and institutional buyers in India and international markets.

Request a Quote

Send the number of pump sets, your borehole depths and the delivery location through the contact page, or place the Handpump DA 9-15m Variant in the enquiry cart to receive a quotation.

Last updated: 24 September 2026

Reusable Menstrual Set (Product Code: SLE/SAH/01) is a kit of washable cloth sanitary pads used for menstrual protection by women and girls at home, in schools and in humanitarian hygiene distributions. Each set combines two straight pads, three winged pads, two cotton holders and a storage pouch, made to be washed and reused for a minimum of one year. The set is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Reusable Menstrual Set Used For?

The set supports menstrual hygiene management where disposable pads are costly, hard to obtain or difficult to dispose of. A pad is placed in a cotton holder, which is fastened with its ribbon bands; the absorbent flannel-type cotton faces the body and the synthetic backing helps stop leaks. Straight and winged shapes let the user choose what feels secure for the day, and the pouch keeps clean or used pads out of sight until they can be washed.

Schools and relief programmes often hand out the set together with soap and laundry powder, since pads need a thorough wash with soap and clean water and complete drying, ideally in sunlight, before reuse. Short guidance on washing, drying and private storage helps girls use the kit with confidence.

What to Specify When Ordering

• Number of sets, usually one per girl or woman in the distribution.
• Preferred colour: grey or light brown.
• Whether soap bars or laundry powder should be quoted with the sets for a complete hygiene pack.

Supplier

Jain Scientific Equipments Private Limited trades under the ScienceLab name and supplies this menstrual hygiene set from Ambala, Haryana, India. Besides school laboratory items, the company sources personal hygiene supplies for education departments, NGOs and relief agencies, and consolidates them with other hygiene-kit items on a single quotation for India and international markets. See the ScienceLab company profile for background.

Related Water, Sanitation & Hygiene Supplies

Items commonly packed with reusable menstrual sets in hygiene kits:

• Soap Toilet Bar Approx. 100-110g Wrapped — perfume-free bar soap for washing the pads and for personal hygiene.
• Laundry Detergent/Washing Powder, 1.5kg — concentrated powder for hand washing cloth items.
• Multipurpose Cloth Cotton 1x1.5m — a cotton cloth that can serve many household hygiene uses.
• Soap Box Plastic — keeps the soap bar clean and dry between washes.

The full range is in Water, Sanitation & Hygiene Supplies.

Frequently Asked Questions

What is in each Reusable Menstrual Set?
Each Reusable Menstrual Set contains two straight pads, three winged pads, two holders made of cotton and one pouch for storage. The holders have ribbon bands that keep the pads in position, and the pouch keeps the pieces together between uses.

How long can the Reusable Menstrual Set be used?
The Reusable Menstrual Set is made to be used and reused for a minimum of one year, with workmanship intended to withstand multiple washes over that period. Careful washing and full drying after each use help the pads keep their shape and absorbency.

What are the pads in the Reusable Menstrual Set made of?
The pads in the Reusable Menstrual Set are made of cotton, preferably flannel, on one side for high absorbency, with a synthetic material on the flip side for protection against leakage. The holders are also cotton, with edges finished by over-locking or similar stitching.

Which colours does the Reusable Menstrual Set come in?
The Reusable Menstrual Set is offered in grey or light brown. State the colour you prefer, or whether a mix is acceptable, when you send your enquiry so the quotation matches your distribution plan.

How should the Reusable Menstrual Set be washed?
Pads from the Reusable Menstrual Set should be rinsed in cool water, washed with soap, rinsed again and dried completely, preferably in sunlight, before being stored in the pouch. Never store the pads while still damp.

Who supplies the Reusable Menstrual Set?
The Reusable Menstrual Set is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which sources the sets for schools, NGOs and relief programmes. Bulk quantities for India and international markets can be quoted through the contact page.

Request a Quote

Tell us how many Reusable Menstrual Sets you need, your colour preference and the delivery destination on the contact page, or add the set and other hygiene items to the enquiry cart.

Last updated: 24 September 2026

Soap Toilet Bar Approx. 100-110g Wrapped (Product Code: SLE/SAH/02) is a wrapped, perfume-free toilet soap bar used for handwashing and bathing in households, schools, hostels and hygiene-kit distributions. Its specification calls for a minimum of 75% total fatty matter, no animal fat and a biodegradable formula described as suitable for all skin types. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Toilet Soap Bar Used For?

Handwashing with soap and water is one of the simplest hygiene habits taught in schools and promoted in water, sanitation and hygiene (WASH) programmes, and a bar soap is the everyday tool for it. This wrapped bar is meant for washing hands and for bathing; its perfume-free formula and moisturizing ingredients make it a practical choice for large groups where users have different skin types.

Total fatty matter is the main measure of a toilet soap's quality: a higher TFM generally means a harder bar that lathers well and lasts longer in daily use. Keep bars in a drained soap box between uses so they do not soften, and store cartons in a cool, dry place away from direct sun.

What to Specify When Ordering

• Number of bars (or number of hygiene kits and bars per kit).
• Whether soap boxes should be quoted with the bars.
• Any composition details your programme needs in writing, such as TFM or palm-oil sourcing, so we can confirm them with the quotation.

Supplier

This soap bar is supplied by Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, from Ambala, Haryana, India. The company sources hygiene consumables such as soap, toothpaste and laundry powder for schools, hostels, NGOs and relief buyers, and brings them together with other hygiene-kit items for delivery within India and to international markets. Company details are on the ScienceLab profile page.

Related Water, Sanitation & Hygiene Supplies

Handwashing and personal hygiene items that pair with this soap bar:

• Soap Box Plastic — a two-piece box that keeps the bar clean and dry.
• Hand Wash Station — a handwashing point for schools and public spaces.
• Hand sanitizer Alcohol >60% 500ml w. Pump — for hand hygiene when soap and water are not at hand.
• Laundry Detergent/Washing Powder, 1.5kg — for washing clothes and cloth items in the same kit.

See more in Water, Sanitation & Hygiene Supplies.

Frequently Asked Questions

What does the weight of the Soap Toilet Bar Approx. 100-110g Wrapped mean?
The Soap Toilet Bar Approx. 100-110g Wrapped is specified at 100 g, and the product name gives an approximate band of 100-110 g per bar. If your tender requires a fixed minimum weight, state it in your enquiry so we can confirm it before quoting.

What is the total fatty matter of the Soap Toilet Bar Approx. 100-110g Wrapped?
The Soap Toilet Bar Approx. 100-110g Wrapped is specified with a total fatty matter content of at least 75%. TFM is the usual quality measure for toilet soap, and higher values generally give a firmer bar with good lather.

Is the Soap Toilet Bar Approx. 100-110g Wrapped perfume-free?
Yes, the Soap Toilet Bar Approx. 100-110g Wrapped is specified as perfume-free and free from animal fat, with natural humectants and moisturizing ingredients. It is described as suitable for all skin types, including dry and sensitive skin.

How long does the Soap Toilet Bar Approx. 100-110g Wrapped keep?
Shelf life of the Soap Toilet Bar Approx. 100-110g Wrapped depends on the production batch and storage conditions, so we do not quote a fixed period. Ask us for the expiry date of the batch you are quoted, and store cartons in a cool, dry place.

Who supplies the Soap Toilet Bar Approx. 100-110g Wrapped?
The Soap Toilet Bar Approx. 100-110g Wrapped is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. The company sources the soap and quotes it for bulk hygiene programmes, schools and institutions in India and international markets.

What should a quotation request for the Soap Toilet Bar Approx. 100-110g Wrapped include?
A quotation request for the Soap Toilet Bar Approx. 100-110g Wrapped should include the number of bars, any specification points you need confirmed in writing and the delivery destination. Send it via the contact page.

Request a Quote

To receive prices for the Soap Toilet Bar Approx. 100-110g Wrapped, share your quantity and destination on the contact page or add it to the enquiry cart with the rest of your hygiene-kit list.

Last updated: 24 September 2026

Hand sanitizer Alcohol >60% 500ml w. Pump (Product Code: SLE/SAH/03) is an alcohol-based hand sanitizer in a 500 ml pump bottle, used for hand antisepsis in offices, households, classrooms and other shared spaces. Its alcohol content lies between 60% and 80%, and it is fragrance-free, with no colorants, dyes or perfumes. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the 500 ml Hand Sanitizer Used For?

An alcohol-based hand rub is used to clean hands when soap and running water are not close by — at office desks, reception counters, classroom doors, staff rooms and at home. The 500 ml pump bottle suits a fixed spot on a desk or shelf, where people take one pump, rub it over all surfaces of both hands and let it dry fully; it does not replace handwashing when hands are visibly dirty.

Because the product contains 60-80% alcohol, it is flammable: keep bottles away from flames, heaters and direct sun, close the pump when not in use, and place dispensers where young children can use them only under supervision. Its fragrance-free, dye-free formula is useful in shared spaces where some users are sensitive to scents.

What to Specify When Ordering

• Number of 500 ml pump bottles.
• Any exact alcohol percentage your policy requires within the 60-80% range, so it can be confirmed for the quoted batch.
• Whether smaller personal bottles or gel sanitizer from the same range should be quoted together.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, India, supplies this hand sanitizer as part of its hygiene and sanitation range. The company sources it for schools, offices, institutions and programme buyers, and can combine it with soap, disinfectant and cleaning items on one quotation for India and international markets. Learn more on the ScienceLab profile page.

Related Water, Sanitation & Hygiene Supplies

Other hand hygiene products in the same range:

• Alcohol Hand Sanitizer, 150ml — a smaller bottle for personal carry.
• Alcohol Hand Sanitizer Gel — a gel format for users who prefer it to a liquid.
• Hand Wash Station — a handwashing point for washing with soap and water.
• Soap Toilet Bar Approx. 100-110g Wrapped — perfume-free bar soap for routine handwashing.

Browse Water, Sanitation & Hygiene Supplies for the complete list.

Frequently Asked Questions

What alcohol percentage does the Hand sanitizer Alcohol >60% 500ml w. Pump contain?
The Hand sanitizer Alcohol >60% 500ml w. Pump contains not less than 60% and not more than 80% alcohol. If your organisation specifies an exact figure within that range, mention it in your enquiry so it can be confirmed for the batch being quoted.

Is the Hand sanitizer Alcohol >60% 500ml w. Pump fragrance-free?
Yes, the Hand sanitizer Alcohol >60% 500ml w. Pump is fragrance-free and contains no colorants, dyes or perfumes. It is specified not to cause skin irritation or allergies, which makes it practical for shared use in offices and households.

What size is the Hand sanitizer Alcohol >60% 500ml w. Pump?
The Hand sanitizer Alcohol >60% 500ml w. Pump comes in a 500 ml bottle fitted with a pump dispenser, sized for a desk, counter or shelf. For personal carry, the smaller personal-size bottle in the same range may suit better.

What is the shelf life of the Hand sanitizer Alcohol >60% 500ml w. Pump?
Shelf life of the Hand sanitizer Alcohol >60% 500ml w. Pump depends on the chemical, its grade and storage conditions, so no fixed period is stated. Ask us for the expiry date of the batch you are quoted, and store bottles closed, away from heat.

Who supplies the Hand sanitizer Alcohol >60% 500ml w. Pump?
The Hand sanitizer Alcohol >60% 500ml w. Pump is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which sources it for schools, offices and institutions. Bulk quantities for India and international markets are quoted through the contact page.

Request a Quote

Send the number of bottles and the delivery location for the Hand sanitizer Alcohol >60% 500ml w. Pump through the contact page, or add it to the enquiry cart alongside other hygiene supplies.

Last updated: 24 September 2026

Toothpaste for Children 75ml (Product Code: SLE/SAH/04) is a 75 ml, neutral-flavoured, non-fluoride toothpaste used for children's daily tooth brushing at home, in boarding schools and in hygiene-kit distributions. It is formulated without fluoride so it can also be issued in regions where drinking water already carries excess fluoride. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Children's Toothpaste Used For?

This toothpaste is part of a child's daily oral hygiene routine and is often packed into school hygiene kits with a soft children's toothbrush. The neutral flavour keeps it acceptable to children who dislike strong mint, and the fluoride-free formula lets programmes issue one product across districts where groundwater fluoride is already high.

Teachers and caregivers usually show younger children how to use only a small smear of paste, brush all tooth surfaces gently and spit out rather than swallow. Brushing time in school health sessions is a good moment to pair the toothpaste with handwashing practice.

What to Specify When Ordering

• Number of 75 ml packs for children.
• Whether the adult 75 ml toothpaste is needed for the same distribution.
• Whether children's toothbrushes should be quoted with the toothpaste.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, Ambala, Haryana, India, which supplies this children's toothpaste within its personal hygiene range. The company sources it for schools, hostels, NGOs and relief programmes and packs it into consolidated hygiene-kit orders for India and international markets. Institutional buyers completing vendor registration can record the supplying company as Jain Scientific Equipments Private Limited, CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT. See the ScienceLab profile for more.

Related Water, Sanitation & Hygiene Supplies

Oral and personal hygiene items that go with this toothpaste:

• Toothbrush for Children — a soft, small-size brush to use with the paste.
• Toothpaste for Adults 75ml — the adult non-fluoride version for family kits.
• Toothbrush for Adult — a medium-hardness brush for older users in the household.
• Soap Toilet Bar Approx. 100-110g Wrapped — for handwashing before and after brushing.

See all items in Water, Sanitation & Hygiene Supplies.

Frequently Asked Questions

Does the Toothpaste for Children 75ml contain fluoride?
No, the Toothpaste for Children 75ml is non-fluoride. It is specified this way so it can also be used in regions where the water already has excess levels of fluoride, allowing one product to be distributed across different areas.

What flavour is the Toothpaste for Children 75ml?
The Toothpaste for Children 75ml has a neutral flavour. A mild, neutral taste is generally easier for young children to accept than a strong mint, which helps them keep up a daily brushing habit.

How much does one pack of Toothpaste for Children 75ml contain?
One pack of Toothpaste for Children 75ml contains 75 ml of toothpaste. Tell us how many children a distribution covers and how long the supply should last, and we will help you work out the number of packs.

What is the shelf life of the Toothpaste for Children 75ml?
The shelf life of the Toothpaste for Children 75ml depends on the production batch and storage conditions, so no fixed period is stated here. Ask us for the expiry date of the batch you are quoted, and store cartons in a cool, dry place.

Who supplies the Toothpaste for Children 75ml?
The Toothpaste for Children 75ml is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, which sources it for school and relief hygiene kits. Quotations for India and international markets are available through the contact page.

Request a Quote

To order the Toothpaste for Children 75ml, send your quantity and delivery destination via the contact page or add it to the enquiry cart with matching toothbrushes.

Last updated: 24 September 2026