Centrifuges

Medico Centrifuge (Product Code: SLE/LC/01) is a swing-out head bench centrifuge used to separate samples in tubes of up to 15 ml in pathology labs, small hospitals, schools and colleges. Buyers choose between two models, a 4 x 15 ml rotor reaching 3700 RPM and an 8 x 15 ml rotor reaching 3500 RPM, both controlled by a 5-step speed regulator. This laboratory centrifuge in India is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Medico Centrifuge Used For?

The Medico Centrifuge is used for routine, general-purpose separation: driving cells, deposits and precipitates to the bottom of the tube so the clear liquid above can be drawn off. In a swing-out head the buckets pivot outward as the rotor gathers speed, so the tubes spin close to horizontal and the sediment settles as a flat, even layer, which helps whenever a clean boundary between layers matters.

Pathology benches use it for everyday sample preparation, while schools and colleges use it to demonstrate density-based separation in biology and chemistry practicals, making it practical school biology lab equipment in India as well as a clinical bench tool. Load tubes in opposite pairs of equal volume, raise the speed one step at a time, never exceed the 15 ml tube size and let the rotor stop fully before lifting the lid. A connected load of only 0.11 or 0.13 kVA keeps its power demand low.

What to Specify When Ordering

• Model: 4 x 15 ml (60 ml maximum capacity, up to 3700 RPM) or 8 x 15 ml (120 ml, up to 3500 RPM)
• Number of units needed for each laboratory
• Whether 15 ml centrifuge tubes and racks should be quoted with the centrifuge
• Mains voltage and plug type at the delivery site, especially for export orders

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab from Ambala, Haryana, and supplies the Medico Centrifuge to pathology laboratories, hospitals, schools, colleges and dealers in India and international markets. The company sources this centrifuge for its customers and can quote matching tubes and racks in the same order. Background on the company is on our company profile.

Related Laboratory Equipment

Consumables, accessories and alternative centrifuges used in the same workflow:

• Centrifuge Tubes — 15 ml tubes that match the maximum tube size of both Medico models.
• Test Tube Rack — holds samples upright before loading and after separation.
• Hematocrit Centrifuge — a dedicated option when capillary haematocrit work is also required.
• Clinical Centrifuge — a fixed angle alternative with the same style of stepped speed control.
• Economical Centrifuge — a simpler angle-head unit for small-capacity centrifuging.

Compare all models in our Centrifuges category.

Frequently Asked Questions

What is the difference between the two Medico Centrifuge models?
The Medico Centrifuge comes in two models. The 4 x 15 ml model holds 60 ml in total, reaches 3700 RPM and has a 0.11 kVA connected load; the 8 x 15 ml model holds 120 ml, runs up to 3500 RPM and has a 0.13 kVA connected load.

What tube size does the Medico Centrifuge accept?
The Medico Centrifuge accepts tubes of up to 15 ml in both models, carried in its swing-out rotor head. Fill tubes to equal volumes, place them opposite each other, and do not load tubes larger than 15 ml into the buckets.

Does the Medico Centrifuge have a timer?
A timer is not listed for the Medico Centrifuge; speed is set on its 5-step speed regulator and the operator times each run. If your protocol needs an automatic timer, contact us and we will suggest a suitable model from the range.

Who supplies the Medico Centrifuge?
The Medico Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab from Ambala, Haryana, India. The company quotes and ships it to pathology laboratories, hospitals, schools, colleges and dealers in India and international markets.

Can a calibration certificate be provided with the Medico Centrifuge?
Availability of a calibration certificate or speed verification for the Medico Centrifuge should be discussed with us when you enquire. Tell us which model you need and what documentation your laboratory or tender requires, and we will confirm what can be provided.

What should a quotation request for the Medico Centrifuge include?
A quotation request for the Medico Centrifuge should state the product code SLE/LC/01, the model (4 x 15 ml or 8 x 15 ml), the quantity, the delivery address in India or abroad, and your mains voltage and plug type.

Request a Quote

For a quotation on the Medico Centrifuge, contact us or add it to your enquiry cart together with tubes and racks.

Last updated: 24 September 2026

Economical Centrifuge (Product Code: SLE/LC/02) is an entry-level angle-head centrifuge used to handle small-capacity centrifuging in school, college and clinic laboratories. Its resiliently mounted 3500 RPM motor is designed for vibration-free running, speed is chosen on a built-in 5-step regulator, and tube carriers come with the unit. This budget laboratory centrifuge in India is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Economical Centrifuge Used For?

The Economical Centrifuge is used for short, routine spins where only a few tubes need clearing at a time: settling a precipitate in a chemistry practical, pelleting debris from a suspension or spinning down a small batch of clinical samples. Because the head holds the tubes at a fixed tilt, particles reach the tube wall quickly and slide down into a compact pellet.

Start on the lowest of the five speed steps and work up towards the 3500 RPM motor speed, which is gentler on both the samples and the drive. Place carriers with equal volumes directly opposite each other, keep the lid area clear and let the head stop on its own. Wiping the chamber and carriers after each class stops dried spills from upsetting the balance later, a simple habit that keeps this piece of school chemistry lab equipment in India running smoothly.

What to Specify When Ordering

• The angle head rotor option you need, stated as tube size and tubes per run
• Number of units required for the laboratory
• Whether centrifuge tubes and racks should be added to the quotation

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited of Ambala, Haryana. The company supplies the Economical Centrifuge to schools, colleges, clinics and dealers in India and international markets, and quotes it alongside the tubes and racks a small laboratory usually needs. More about the business is on our company profile.

Related Laboratory Equipment

Items commonly ordered with, or instead of, the Economical Centrifuge:

• Centrifuge Tubes — graduated tubes; confirm the fit with the carriers when ordering.
• Test Tube Rack — keeps samples upright and in order before and after spinning.
• Medico Centrifuge — a swing-out head alternative in 4 x 15 ml and 8 x 15 ml versions.
• Universal Centrifuge — adds a timer, stepless speed control and an easy lid lock.
• Hand Centrifuge — a crank-operated unit for rooms without a reliable power supply.

See every model in the Centrifuges category.

Frequently Asked Questions

What speed does the Economical Centrifuge reach?
The Economical Centrifuge has a resiliently mounted motor rated at 3500 RPM. Its built-in 5-step speed regulator lets the operator run at lower settings, so the unit can be brought up to speed gradually for delicate samples.

Can the head of the Economical Centrifuge be changed?
The Economical Centrifuge has one non-removable angle head, and the listing says it is offered with angle head rotor options. Tell us your tube size and the number of tubes per run, and we will confirm the configuration before quoting.

How many tubes does the Economical Centrifuge hold?
Tube capacity is not stated in the listing for the Economical Centrifuge, because it depends on the angle head rotor chosen. Please contact us with your tube size and batch size so we can confirm what the tube carriers accept.

Are tube carriers included with the Economical Centrifuge?
Yes. The Economical Centrifuge is supplied complete with tube carriers, so it can be used as soon as it is set up. Centrifuge tubes themselves are listed separately and can be added to the same quotation.

Does the Economical Centrifuge have a timer or lid lock?
Neither a timer nor a lid lock is listed for the Economical Centrifuge. Laboratories that need both can consider the Universal Centrifuge, which is listed with an easy lid lock, a stepless speed regulator and a timer.

Who supplies the Economical Centrifuge?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab in Ambala, Haryana, supplies the Economical Centrifuge. It quotes the unit for schools, colleges, clinics and dealers across India and in international markets, together with any tubes or racks you need.

Can a calibration certificate be supplied with the Economical Centrifuge?
Whether a calibration certificate or speed check can be supplied with the Economical Centrifuge should be raised with us at the enquiry stage. Quote the product code SLE/LC/02 and describe the documentation your institution needs.

Request a Quote

For a quotation on the Economical Centrifuge, send an enquiry or place it in your enquiry cart with tubes and racks.

Last updated: 24 September 2026

Universal Centrifuge (Product Code: SLE/LC/03) is a compact bench centrifuge used to carry out routine separations in teaching, clinical and research laboratories. It combines an easy lid lock, a stepless speed regulator and a timer, and it is offered with a choice of rotors so one base unit can match the tubes a laboratory already uses. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its range of laboratory instruments in India.

Key Details

What Is the Universal Centrifuge Used For?

The Universal Centrifuge is used for the many short, repeat separations of a working day: spinning down routine samples, clarifying extracts, collecting precipitates and pelleting cells before washing. Stepless control lets the operator set the speed a method asks for instead of the nearest fixed step, and the timer gives every batch the same run length, so results stay consistent between students or shifts.

The easy lid lock keeps the lid shut while the rotor turns, which matters when several people share one instrument. Its compact body fits a crowded bench beside a water bath or microscope, making it useful biology lab equipment in India for departments that mix teaching with routine testing. Load balanced pairs, set the timer before starting and wait for the rotor to stop before releasing the lid.

What to Specify When Ordering

• The rotor you need, described by tube size and number of places
• Number of units for the laboratory or department
• Whether tubes and racks should be quoted with the centrifuge
• Mains voltage and plug type at the delivery site for export orders

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies the Universal Centrifuge from Ambala, Haryana, to laboratories and dealers in India and international markets. Purchase departments completing vendor registration can record the supplying company's GSTIN 06AAECJ8618A1ZT and its LEI 3358004HRD1JIVXKYX49. More about the company is on our company profile.

Related Laboratory Equipment

Tubes, racks, rotors and alternative models used alongside this centrifuge:

• Fixed Angle Rotor — a separately listed rotor; ask us whether it suits your Universal Centrifuge configuration.
• Centrifuge Tubes — tubes for routine samples in the rotor you choose.
• Test Tube Rack — organises samples while the centrifuge is being loaded.
• Medico Centrifuge — a swing-out head model with a 5-step regulator.
• Mini Centrifuge — for micro tubes when small-volume work is also needed.

All models are listed in our Centrifuges category.

Frequently Asked Questions

What features does the Universal Centrifuge have?
The Universal Centrifuge combines an easy lid lock, a stepless speed regulator and a timer in a compact body intended for routine laboratory work. It is offered with a choice of rotors, so the same base unit can be configured for different tube formats.

Which rotors are available for the Universal Centrifuge?
The Universal Centrifuge is offered with a choice of rotors, but the rotor list is not published on this page. Contact us with your tube size and the number of places you need, and we will recommend a rotor and include it in the quotation.

What maximum speed and timer range does the Universal Centrifuge have?
Maximum speed and timer range for the Universal Centrifuge are not given in the product listing and can depend on the rotor chosen. Ask us for the figures that apply to your configuration before ordering, so you can check them against your method.

Why choose stepless speed control on the Universal Centrifuge?
Stepless speed control lets the Universal Centrifuge run at any setting within its range rather than at a few fixed positions. That makes it easier to match the speed a written method specifies and to bring delicate samples up to speed gently.

Who supplies the Universal Centrifuge?
The Universal Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), based in Ambala, Haryana, India. The company quotes it with a suitable rotor for teaching, clinical and research laboratories, dealers and importers in India and international markets.

Can a calibration certificate be provided for the Universal Centrifuge?
Calibration certificate or speed verification requirements for the Universal Centrifuge should be discussed with us at the enquiry stage. Let us know the rotor, the speeds you work at and the documents your laboratory needs, and we will confirm what is possible.

What does an institutional or export quotation for the Universal Centrifuge need?
Send the product code SLE/LC/03, the rotor or tube size you need, the quantity and the delivery address. We supply the Universal Centrifuge across India and to international markets, and can add tubes and racks to the same quotation.

Request a Quote

To receive a quotation for the Universal Centrifuge, contact us or add it to your enquiry cart with the tubes and racks you need.

Last updated: 24 September 2026

Mini Centrifuge (Product Code: SLE/LC/04) is a microprocessor-controlled bench centrifuge used to spin 1.5 ml and 0.5 ml micro tubes in molecular biology, microbiology and teaching laboratories. Speed is set from 1000 to 10000 rpm in steps of 1000 rpm on a brushless motor, and a digital display shows time and RPM while a 0–15 minute timer ends each run. This microcentrifuge for India and overseas buyers is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Mini Centrifuge Used For?

The Mini Centrifuge is used for the small-volume steps of molecular biology and microbiology practicals: bringing droplets down from tube lids after mixing, pelleting cells or precipitated DNA, and separating small aqueous and solid phases. A spin can start as gently as 1000 rpm or go up to 10000 rpm, and because speed changes in fixed 1000 rpm steps, students can follow a written protocol exactly.

The digital readout confirms time and RPM at a glance, and the timer stops the run after up to 15 minutes so the user can prepare the next step. Alongside a DNA extraction kit for school practicals in India, it gives biotechnology students their own spin-down station. Balance tubes with equal volumes in opposite positions, close caps firmly and wait for the rotor to stop before opening.

What to Specify When Ordering

• The rotor set you need: positions for 1.5 ml tubes, 0.5 ml tubes, or both
• Number of units for the laboratory
• Micro tubes, micropipettes and tips to be quoted with the centrifuge
• Mains voltage at the delivery site

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana. The company supplies the Mini Centrifuge to school, college and research laboratories and to dealers in India and international markets, and can quote micro tubes and pipetting accessories in the same order. Read more on our company profile.

Related Laboratory Equipment

Consumables and alternatives for micro-tube work:

• Micro Centrifuge Tube, 1.5ml — micro tubes in the 1.5 ml size this centrifuge accepts.
• Micropipette — for accurately dispensing the small volumes loaded into micro tubes.
• Micropipette Tips — disposable tips to go with the micropipette.
• Micro Centrifuge — a higher-speed alternative for methods that need more than 10000 rpm.
• Centrifuge, Mini — another compact option in the range, with a rotor for PCR tubes.

Compare models in our Centrifuges category.

Frequently Asked Questions

What speed range does the Mini Centrifuge cover?
The Mini Centrifuge runs from 1000 to 10000 rpm under microprocessor control, and the speed is set in steps of 1000 rpm. The chosen speed and the elapsed time are both shown on its digital display during the run.

Which tubes can the Mini Centrifuge spin?
The Mini Centrifuge is designed for 1.5 ml and 0.5 ml micro tubes. The number of positions depends on the rotor supplied and the listing text is incomplete, so please confirm the rotor configuration with us for the tube quantity you work with.

How long can a run be set on the Mini Centrifuge?
The Mini Centrifuge has a 0–15 minute electronic digital timer that switches the run off automatically. Time and RPM appear on the digital display, which suits the short spins used in most micro-tube protocols.

Why does the brushless motor in the Mini Centrifuge matter?
The Mini Centrifuge uses a brushless motor, which has no carbon brushes to wear out. That means less routine maintenance than with a brushed motor, a practical advantage for an instrument shared by many students.

Who supplies the Mini Centrifuge?
The Mini Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. The company quotes it for schools, colleges, research laboratories and dealers in India and international markets, together with micro tubes and pipettes if required.

Can a calibration certificate be provided for the Mini Centrifuge?
Please discuss calibration certificate or speed verification needs for the Mini Centrifuge with us when you enquire. Mention the speeds you use and any documents your institution requires, and we will tell you what can be arranged.

What should an order for several Mini Centrifuge units include?
An order for the Mini Centrifuge should give the product code SLE/LC/04, the number of units, the rotor set required, the delivery destination in India or abroad and your mains voltage, so the quotation matches your laboratory.

Request a Quote

To request a quotation for the Mini Centrifuge, contact us or add it to your enquiry cart together with micro tubes and pipettes.

Last updated: 24 September 2026

Clinical Centrifuge (Product Code: SLE/LC/05) is a fixed angle bench centrifuge used to settle cells, sediments and precipitates in pathology labs, small hospitals, schools and colleges. Buyers looking for a simple laboratory centrifuge in India can choose between two listed versions, one for tubes up to 15 ml at up to 4500 RPM and one for tubes up to 5 ml at up to 4000 RPM, both with a 5-step regulator. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Clinical Centrifuge Used For?

The Clinical Centrifuge is used for routine separation work such as settling blood cells so that serum or plasma can be drawn off, concentrating the deposit from a urine sample, and clearing precipitates from solutions. In its fixed angle head the tubes lean at a constant slope, so sediment gathers quickly against the lower wall and bottom of each tube.

In schools and colleges it shows how density drives separation, for example by spinning a precipitate out of a reaction mixture or settling a soil-water suspension, which makes it handy school biology lab equipment in India. Start on a low step and move up the regulator to the setting your method calls for, load tubes opposite each other with equal volumes, and let the head stop completely before removing them.

What to Specify When Ordering

• Version: 15 ml tubes (up to 4500 RPM) or 5 ml tubes (up to 4000 RPM)
• Quantity per laboratory
• Tubes to be quoted with it, in the size that matches the chosen version
• Mains voltage and plug type at the delivery site

Supplier

Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, supplies the Clinical Centrifuge from Ambala, Haryana, to pathology laboratories, hospitals, schools, colleges and dealers in India and international markets. When you enquire, the company confirms which of the two listed versions suits your tubes before it quotes. Read more in our company profile.

Related Laboratory Equipment

Items used alongside this centrifuge in a routine separation workflow:

• Centrifuge Tubes — tubes for loading the head; check the size against the limit of your version.
• Tube Vacuum Serum Gel — blood collection tubes used where serum is separated after clotting.
• Test Tube Rack SS — holds tubes upright before loading and after the spin.
• Centrifuge, Clinical — a digitally controlled clinical model with timer and RPM/G-force display.
• Laboratory Centrifuge — a swing out head alternative with digital timer for low-speed work.

Compare every model in our Centrifuges range.

Frequently Asked Questions

What is the difference between the two Clinical Centrifuge versions?
The Clinical Centrifuge listing gives two versions: one takes tubes up to 15 ml with a maximum speed of 4500 RPM, the other takes tubes up to 5 ml with a maximum of 4000 RPM. Both have a 120 ml maximum capacity and a 0.13 kVA connected load.

How is the speed of the Clinical Centrifuge set?
The Clinical Centrifuge uses a 5-step speed regulator, so the operator selects one of five speed positions rather than keying in an exact RPM. Where a method needs a precise RPM or RCF value, a digitally controlled model such as the Centrifuge, Clinical may suit better.

Does the Clinical Centrifuge have a timer?
A timer is not listed in the documentation for the Clinical Centrifuge, so runs are timed by the operator. Contact us to confirm the controls fitted before ordering if an automatic timer is essential to your protocol.

How many tubes does the Clinical Centrifuge head hold?
The Clinical Centrifuge listing states a 120 ml maximum capacity and the maximum tube size of each version, but not the number of tube positions. Ask us for the head layout of the version you are considering before placing an order.

Who supplies the Clinical Centrifuge?
The Clinical Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, Ambala, Haryana, India. It is quoted for pathology laboratories, small hospitals, schools, colleges and distributors in India and international markets.

Can a calibration certificate be supplied with the Clinical Centrifuge?
Availability of a calibration certificate for the Clinical Centrifuge is confirmed at quotation stage. Contact us with the version you need and the paperwork your laboratory or tender requires, and we will tell you what can be provided.

What should an enquiry for the Clinical Centrifuge include?
An enquiry for the Clinical Centrifuge should include the product code SLE/LC/05, the version (15 ml or 5 ml tube size), the quantity, the delivery location in India or abroad and any tender documents you need.

Request a Quote

To order the Clinical Centrifuge, send your requirement through our contact page or add it to the enquiry cart; we will reply with a quotation for the version you need.

Last updated: 24 September 2026

Laboratory Centrifuge (Product Code: SLE/LC/06) is a low-speed swing out centrifuge used to spin samples gently in clinical and pathological laboratories, including infertility labs where low speed is recommended. It carries an 8 x 15 ml swing out head, a 0–99 minute digital timer and a brushless AC motor that reaches 3000 rpm without load. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, alongside its other laboratory instruments in India.

Specifications

What Is the Laboratory Centrifuge Used For?

The Laboratory Centrifuge is used where samples need a gentle, low-speed spin, as in routine clinical and pathological separations and in infertility laboratory work where low speed is recommended. Its swing out buckets tilt towards the horizontal as the head accelerates, so the deposit forms a flat layer at the bottom of the tube and the liquid above can be removed cleanly.

The 8 reduction adapters let the 15 ml buckets hold standard 12 x 100 mm test tubes, so a lab can switch tube formats without changing the head. Set the digital timer, load tubes in opposite pairs with matched volumes and watch the run through the see-through acrylic lid instead of opening it. Expect the speed to settle at 2850 rpm with a full load against 3000 rpm empty, a detail worth checking when comparing any laboratory centrifuge in India against a written method.

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab and supplies this Laboratory Centrifuge from Ambala, Haryana, to hospitals, diagnostic and pathology laboratories, teaching institutions and dealers in India and international markets. The company can also quote the tubes and racks that complete the setup. See the company profile for the wider range.

Related Laboratory Equipment

Accessories and alternatives that fit the same low-speed workflow:

• Centrifuge Tubes — tubes for the swing out buckets.
• Test Tube Racks — to stage tubes in pairs while balancing the head.
• Vortex Mixer — for resuspending pellets between wash spins.
• Centrifuge, Clinical, Swing Out Head — a programmable swing out model with larger-capacity buckets.
• Clinical Centrifuge — a fixed angle alternative with stepped speed control.

See all models in the Centrifuges category.

Frequently Asked Questions

Why does the Laboratory Centrifuge list two maximum speeds?
The Laboratory Centrifuge reaches 3000 rpm running empty and 2850 rpm when loaded, because a full set of tubes adds mass for the motor to turn. Use the on-load figure of 2850 rpm when planning a method that specifies speed.

Can the Laboratory Centrifuge spin 12 x 100 mm test tubes?
Yes. The Laboratory Centrifuge comes with 8 reduction adapters that fit its 15 ml swing out buckets and accept test tubes of 12 x 100 mm, so both tube formats can be used on the same head.

Is the Laboratory Centrifuge suitable for infertility laboratory work?
The Laboratory Centrifuge is described as suitable for infertility labs where low speed is recommended. Check the speed and time your own protocol specifies against its 3000 rpm maximum and 0–99 minute timer, and contact us if you need help matching them.

What motor and lid does the Laboratory Centrifuge have?
The Laboratory Centrifuge uses a brushless AC motor, which has no carbon brushes to wear, and a see-through acrylic lid that lets the operator watch the head during a run. Keep the lid closed until the head has fully stopped.

Who supplies the Laboratory Centrifuge?
The Laboratory Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company quotes it for clinical, pathological and teaching laboratories and for dealers and importers in India and international markets.

Is a calibration certificate available for the Laboratory Centrifuge?
Availability of a calibration certificate for the Laboratory Centrifuge is confirmed when we prepare your quotation. Please get in touch with the speeds you use and the documents your laboratory needs so we can check what can be provided.

What details are needed for an institutional quotation for the Laboratory Centrifuge?
For the Laboratory Centrifuge, send the product code SLE/LC/06, the quantity, the delivery address or export destination, and whether extra tubes or racks should be included. We supply hospitals, clinics and teaching labs in India and international markets.

Request a Quote

Ask for a quotation on the Laboratory Centrifuge through our contact form, or add it to the enquiry cart together with any accessories you need.

Last updated: 24 September 2026

Hematocrit Centrifuge (Product Code: SLE/LC/07) is a microprocessor-based centrifuge used to spin blood-filled capillary tubes for haematocrit (packed cell volume) readings in clinical and teaching laboratories. Its micro hematocrit rotor takes 24 capillaries of 75 mm x 1 mm at preset speeds from 2000 to 13000 rpm, and it arrives with capillary tubes, a reading device and sealing wax. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, within its range of analytical lab instruments in India.

Specifications

Accessories supplied with the centrifuge:

• Micro hematocrit rotor for 24 capillaries of 75 mm x 1 mm
• Heparinised capillary tubes, 75 mm long x 1 mm bore (pack of 100)
• Non-heparinised capillary tubes, 75 mm long x 1 mm bore (pack of 100)
• Reading device
• Sealing wax, 1 tray

What Is the Hematocrit Centrifuge Used For?

The Hematocrit Centrifuge is used to separate red cells from plasma inside sealed capillary tubes so that the proportion of packed cells can be read. Blood is drawn into a capillary, one end is plugged in the sealing wax tray, and the tubes go into the 24-place rotor with the sealed ends facing outward before the run is started at the preset speed and time.

After the spin, the lengths of the red cell column and the whole sample are compared on the reading device. Physiology and medical laboratory technology courses also use it for student practicals, since the set includes what the exercise needs, which makes it convenient biology lab equipment in India for colleges setting up a haematology bench. Keep the rotor and stainless steel bowl free of blood and glass fragments, and clean them after any capillary breaks.

What to Specify When Ordering

• Number of centrifuges required
• Extra packs of heparinised or non-heparinised capillaries, beyond the pack of 100 of each that is included
• Additional sealing material if you run large numbers of samples
• Delivery destination and mains voltage

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies the Hematocrit Centrifuge together with its rotor, capillary tubes, reading device and sealing wax. The company quotes it for hospitals, clinics, colleges and dealers in India and international markets. See our company profile for more about the business.

Related Laboratory Equipment

Consumables and alternatives for the same capillary workflow:

• Capillary Heparin Tube — replacement heparinised capillaries once the supplied pack is used up; check the length and bore suit the rotor.
• EDTA Capillary Tube — capillaries with an alternative anticoagulant, where your method calls for EDTA.
• Capillary Tube Sealant — for sealing capillary ends before the spin.
• Gloves W/o Powder Nitrile Disposable — hand protection when handling blood samples.
• Haematocrit Centrifuge — another haematocrit model in our Clinical Laboratory range.

Other models are listed in our Centrifuges category.

Frequently Asked Questions

What is included with the Hematocrit Centrifuge?
The Hematocrit Centrifuge comes with a micro hematocrit rotor for 24 capillaries of 75 mm x 1 mm, a pack of 100 heparinised and a pack of 100 non-heparinised capillary tubes, a reading device and one tray of sealing wax.

How many samples can the Hematocrit Centrifuge run together?
The Hematocrit Centrifuge spins up to 24 capillaries per run in its micro hematocrit rotor. With an odd number of samples, place a filled capillary opposite the last one so the rotor stays balanced during the spin.

What speed and timer range does the Hematocrit Centrifuge offer?
The Hematocrit Centrifuge can be preset to any speed from 2000 to 13000 rpm under microprocessor control. Its digital timer covers 0–15 minutes, and the LCD shows set time, run time and RPM during each run.

When are heparinised rather than non-heparinised capillaries used with the Hematocrit Centrifuge?
Heparinised capillaries supplied with the Hematocrit Centrifuge contain heparin to stop blood clotting in the tube, so they suit samples taken directly by skin puncture. Non-heparinised capillaries are used for blood already collected into an anticoagulant tube.

Who supplies the Hematocrit Centrifuge?
The Hematocrit Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. It is quoted with its rotor and accessories for hospitals, clinics, teaching laboratories and distributors in India and international markets.

Does the Hematocrit Centrifuge motor need servicing?
The Hematocrit Centrifuge uses a well-balanced universal motor with imported carbons. Carbon brushes wear gradually with use and are replaced during servicing, so contact us about spare carbons and service support for your unit.

Can a calibration certificate be supplied with the Hematocrit Centrifuge?
Whether a calibration certificate can be supplied with the Hematocrit Centrifuge is discussed at quotation stage. Please contact us with your requirement and quantity, and mention any extra capillary packs you want included.

Request a Quote

For a quotation on the Hematocrit Centrifuge, write to us via the contact page or add the item to our enquiry cart.

Last updated: 24 September 2026

Micro Centrifuge (Product Code: SLE/LC/08) is a microprocessor-based high-speed centrifuge used to pellet and clarify samples in 1.5 ml and 2 ml micro tubes in molecular biology, biotechnology and biochemistry laboratories. Its rotor head holds 12 tubes and can be preset anywhere from 2000 to 16000 rpm, with set time, run time and RPM on a digital display. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory instruments supplier serving Indian and overseas buyers.

Specifications

What Is the Micro Centrifuge Used For?

The Micro Centrifuge is used for pelleting DNA or protein precipitates, clearing cell debris from lysates, harvesting bacteria from small cultures and collecting droplets from tube walls after mixing. Because the preset speed spans 2000 to 16000 rpm, the same unit can give a gentle spin at the low end or a hard pelleting spin at the upper end of the range.

The 0–15 minute timer suits the short runs common in micro-tube protocols, and the display confirms speed and elapsed time without guesswork. Load the 12-place head symmetrically, adding a water-filled balance tube when the sample count is odd, and check that caps are closed before each run. It is a practical addition to microbiology lab equipment in India for colleges and research groups; wipe the stainless steel bowl after any spill.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab in Ambala, Haryana, supplies the Micro Centrifuge to universities, research centres, schools and distributors in India and international markets. The company can include micro tubes, pipettes and tips in the same quotation. Visit our company profile for background on the business.

Related Laboratory Equipment

Items that complete a micro-tube workstation:

• Micro Centrifuge Tube, 1.5ml — tubes that match the 1.5 ml positions of the rotor head.
• Micropipette — for measuring small sample volumes into the tubes.
• Micropipette Tips — disposable tips for the micropipette.
• Vortex Mixer — for mixing samples before a spin and resuspending pellets afterwards.
• Centrifuge, High Speed — a micro-centrifuge with a larger-capacity rotor and G-force display.

Browse all models in our Centrifuges range.

Frequently Asked Questions

Which tubes fit the Micro Centrifuge rotor head?
The Micro Centrifuge rotor head takes 12 micro tubes of 1.5 ml or 2 ml capacity. Adapters for smaller tubes are not listed for this model, so check with us first if you plan to spin smaller micro tubes or PCR tubes.

How is the speed of the Micro Centrifuge controlled?
Speed on the Micro Centrifuge is preset under microprocessor control anywhere between 2000 and 16000 rpm, and the display shows the running RPM. A speed-accuracy figure is not stated in the documentation, so ask us if your method needs one.

Does the Micro Centrifuge display RCF (x g)?
The Micro Centrifuge display shows set time, run time and RPM rather than RCF. If your protocol is written in x g, ask us for the rotor radius so you can convert the figure to the rpm setting you need.

What is the longest run on the Micro Centrifuge?
The Micro Centrifuge has a microprocessor-based digital timer with a range of 0–15 minutes, shown on its LCD display. That covers the short pelleting and spin-down steps typical of micro-tube methods in molecular biology.

How is the Micro Centrifuge built?
The Micro Centrifuge has a heavy-duty plastic injection-moulded body, a stainless steel bowl around the rotor and a well-balanced universal motor. The stainless steel bowl can be wiped clean quickly after a spill or leaking tube.

Who supplies the Micro Centrifuge?
The Micro Centrifuge is supplied by Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab from Ambala, Haryana, India. The company quotes it for teaching laboratories, research groups and distributors in India and international markets.

Is a calibration certificate available for the Micro Centrifuge?
Availability of a calibration certificate for the Micro Centrifuge is confirmed at quotation stage. Contact us with your requirements, the number of units and any tubes or pipettes you want quoted with them.

Request a Quote

Request a quotation for the Micro Centrifuge through our contact page, or place it in the enquiry cart with any accessories you need.

Last updated: 24 September 2026

Hand Centrifuge (Product Code: SLE/LC/09) is a crank-operated centrifuge used to separate suspensions and precipitates in school and college laboratories without any electrical supply. It has a cast metal body for bench mounting, a removable crank handle and head, and aluminium buckets for 15 ml glass tubes, a long-standing item of school chemistry lab equipment in India. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Hand Centrifuge Used For?

The Hand Centrifuge is used to show, and to speed up, sedimentation: a cloudy precipitate or muddy water sample that would take a long time to settle on the bench separates quickly once it has been spun. In qualitative salt analysis it separates a precipitate from the solution so the clear liquid can be tested further, and in rural schools or field stations it stands in for a motorised centrifuge where power is unreliable.

Fill the 15 ml glass tubes to equal levels, place them in opposite aluminium buckets, and turn the crank at a steady pace rather than in jerks; let the head coast to a stop before lifting the tubes out. With the crank handle and head removed, the unit stores compactly in a cupboard and is easy to clean, which also makes it sensible biology lab equipment for schools in India.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of the Hand Centrifuge and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Because the apparatus comes from the manufacturer itself rather than from a trader, schools, colleges, dealers and importers receive quotations straight from the factory.

Ask us about replacement buckets, crank handles or heads and about repeat orders; the manufacturer deals with them directly. More background is on our company profile.

Related Laboratory Equipment

Useful companions and alternatives for manual separation work:

• Hand Operated Centrifugal Machine — a geared hand-driven alternative from our Chemistry Lab range.
• Centrifuge Tubes — spare tubes; check they suit the 15 ml aluminium buckets.
• Test Tube Rack — holds filled tubes upright before and after spinning.
• Pipette, Pasteur — for drawing off the clear liquid above the sediment.
• Laboratory Centrifuge — an electric swing out model with digital timer, when a motorised unit is needed.

See the full Centrifuges category for electric models.

Frequently Asked Questions

Does the Hand Centrifuge need electricity?
No. The Hand Centrifuge is driven entirely by turning its crank handle, so it works on any bench, including in schools and field stations where the power supply is unreliable or not available at all.

How is the Hand Centrifuge fixed to the bench?
The Hand Centrifuge is designed for bench mounting. The fixing arrangement and the bench-edge thickness it accepts are not given in the documentation, so contact us before ordering if your benches are unusually thick or have a lipped edge.

What tubes does the Hand Centrifuge take?
The Hand Centrifuge is supplied with aluminium buckets for 15 ml glass tubes. The number of buckets on the head is not listed, so please ask us for the head configuration when you request a quotation.

How fast does the Hand Centrifuge spin?
The speed of the Hand Centrifuge depends on how quickly the handle is turned, and no rated speed is listed. If your method needs a stated speed, compare the geared Hand Operated Centrifugal Machine or an electric centrifuge from our range.

Who manufactures the Hand Centrifuge?
The Hand Centrifuge is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy it factory-direct, with quotations issued by the manufacturer.

What safety points should students follow with the Hand Centrifuge?
Students using the Hand Centrifuge should balance the buckets with equal volumes, keep hands and hair clear of the spinning head, and never slow the head by grabbing it. Let it stop on its own before removing the glass tubes.

Can schools order the Hand Centrifuge in bulk?
Yes. Schools, colleges and distributors can order the Hand Centrifuge in quantity; send the number of units and the delivery location in India or abroad, and the manufacturer will prepare a quotation for you.

Request a Quote

For a quotation on the Hand Centrifuge, use our contact form or add it to the enquiry cart with the rest of your lab list; quotations come direct from the manufacturer.

Last updated: 24 September 2026

Centrifuge, Mini (Product Code: SLE/LC/10) is a compact personal centrifuge used for quick spin-downs, DNA extraction and concentration, microfiltration and cell separation in molecular biology and teaching laboratories. It runs up to 7000 rpm at a noise level below 45 dB, weighs 0.5 kg and comes with two interchangeable rotors suited to 2 ml tubes and PCR tubes. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a biology lab equipment supplier to schools, colleges and research labs.

Specifications

What Is the 7000 rpm Mini Centrifuge Used For?

This mini centrifuge is the tool reached for many times a day: bringing droplets down from tube caps after mixing, collecting reagents at the bottom of PCR strips before cycling, pushing filtrate through spin columns during DNA extraction, and settling cells for a quick wash. Fit the rotor suited to 2 ml tubes for micro tubes, or change to the PCR rotor for strips and single PCR tubes; operation is continuous, so the run lasts as long as needed.

At 0.5 kg and under 45 dB it sits quietly beside a pipetting station or in a school biotechnology corner, and the rubber feet keep it steady on the bench. Paired with a DNA extraction kit for school practicals in India, it lets students pellet and recover material without queuing for a large centrifuge. Load opposite positions evenly and keep the lid closed while the rotor turns.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies the Centrifuge, Mini from Ambala, Haryana, to schools, colleges, research laboratories and dealers in India and international markets. For supplier onboarding, the company's registration details are GSTIN 06AAECJ8618A1ZT and Legal Entity Identifier 3358004HRD1JIVXKYX49. More about us is on the company profile.

Related Laboratory Equipment

Items used with a mini centrifuge in molecular biology work:

• Micro Centrifuge Tube, 1.5ml — micro tubes for the 2 ml-format rotor.
• PCR Tube Rack — holds PCR tubes and strips while you pipette.
• Micropipette — for dispensing reagents into tubes before a quick spin.
• Polymerase Chain Reaction (PCR) Machine — the thermal cycling step that follows a spin-down of PCR strips.
• Micro Centrifuge — a microprocessor-controlled, higher-speed model with timer for longer pelleting runs.

Compare other models in our Centrifuges range.

Frequently Asked Questions

Which rotors come with the Centrifuge, Mini?
The Centrifuge, Mini is supplied with two interchangeable rotors, one suited to 2 ml tubes and one to PCR tubes. Listed capacities are 0.2/0.5/1.5/2.0 mL x 8, and 0.2 mL x 16 PCR strips or 0.2 mL x 2 PCR 8-strips.

Can the speed or run time of the Centrifuge, Mini be set?
The Centrifuge, Mini is listed with a maximum speed of 7000 rpm and continuous operation; adjustable speed or a timer is not listed. Contact us before ordering if your protocol needs either feature, and we will suggest a suitable model.

How noisy is the Centrifuge, Mini?
The Centrifuge, Mini runs at a noise level of less than 45 dB, quiet enough to use beside people working at the same bench, and its multiple rubber feet keep it stable while it spins.

How much bench space does the Centrifuge, Mini need?
The Centrifuge, Mini measures 160 x 170 x 122 mm and weighs 0.5 kg, so it fits beside a pipetting station or on a crowded shared bench. It is driven by a DC motor.

How is the Centrifuge, Mini different from the Micro Centrifuge?
The Centrifuge, Mini is a compact continuous-run unit for quick spin-downs, including PCR strips. The Micro Centrifuge adds microprocessor speed presets, a timer and higher speeds for longer pelleting runs in 1.5 ml and 2 ml tubes.

Why might the lid colour of the Centrifuge, Mini differ?
The lid colour of the Centrifuge, Mini may vary between batches, as noted in the product listing. The difference is cosmetic and does not change the rotors, speed or other listed specifications.

Who supplies the Centrifuge, Mini?
The Centrifuge, Mini is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company quotes it for teaching laboratories, research institutes and distributors in India and international markets, and can add tubes, racks and pipettes to the order.

Can a calibration certificate be provided for the Centrifuge, Mini?
Availability of a calibration certificate for the Centrifuge, Mini is confirmed on quotation. Tell us the documentation your laboratory or tender needs, and we will confirm what can be supplied with the unit.

Request a Quote

To buy the Centrifuge, Mini, send us your quantity through the contact page or add it to the enquiry cart.

Last updated: 24 September 2026

Centrifuge, Clinical (Product Code: SLE/LC/11) is a CPU-controlled bench centrifuge used to separate serum, plasma and blood samples in clinical and diagnostic laboratories. Speed is set from 300 to 4500 rpm in 100 rpm steps, the large LCD shows RPM and G-force, and the rotor capacity is listed as 8 x 15 ml or 12 x 10/7/5 ml tubes. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, among its analytical lab instruments in India.

Specifications

What Is the 4500 rpm Clinical Centrifuge Used For?

In a hospital or diagnostic laboratory this centrifuge handles the steady flow of collection tubes that must be spun before testing. The 12-tube configuration takes 5, 7 and 10 ml tubes, and the 8-tube configuration accepts 15 ml tubes such as cell culture tubes. Timing begins only once the set speed is reached, so every sample receives the full programmed separation time, and gentle braking avoids disturbing the separated layers as the rotor slows.

For a short spin, press and hold PULSE: the rotor accelerates to the required speed and holds it for as long as the button is held. Settings can be changed once speed is reached, and the automatic lid release at the end saves time and protects samples from heat build-up. Running below 56 dB, it suits a busy clinical bench, and as a laboratory equipment supplier in India we can advise on matching tubes and racks.

What to Specify When Ordering

• Rotor configuration: 8 x 15 ml or 12 x 10/7/5 ml, according to your collection tubes
• The tube sizes you run most often, so adapters can be confirmed
• Quantity and delivery location in India or abroad
• Any tender documents you need with the quotation

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies the Centrifuge, Clinical from Ambala, Haryana, to hospitals, diagnostic laboratories, teaching institutions and dealers in India and international markets. The company confirms the rotor configuration for your tube sizes before it quotes. See the company profile for more.

Related Laboratory Equipment

Products that support the same blood-processing workflow:

• Tube Vacuum Serum Gel — serum collection tubes that are spun after clotting.
• Test Tube Rack SS — for sorting tubes before and after centrifugation.
• Centrifuge Tubes — tubes for the 15 ml positions.
• Blood Specimen Rotator — keeps anticoagulated samples mixed while they wait to be processed.
• Centrifuge, Clinical, Swing Out Head — a larger multi-rotor model with program memory.

All models are listed in our Centrifuges category.

Frequently Asked Questions

What speed and RCF range does the Centrifuge, Clinical cover?
The Centrifuge, Clinical runs from 300 to 4500 rpm in 100 rpm steps and reaches up to 2490 x g, adjustable in 100 x g steps. Its listed speed accuracy is ±20 rpm, and both RPM and G-force appear on the LCD.

Which tubes can the Centrifuge, Clinical spin?
The rotor capacity of the Centrifuge, Clinical is listed as 12 x 10/7/5 ml or 8 x 15 ml, covering common collection tubes and 15 ml cell culture tubes. Confirm with us which rotor or adapters are supplied for the tube sizes you use.

When does the timer of the Centrifuge, Clinical start counting?
The Centrifuge, Clinical timer starts only once the set speed has been reached, so the separation time is accurate. Runs can be timed from 30 seconds to 99 minutes, or set to HOLD for continuous operation.

What does the PULSE button on the Centrifuge, Clinical do?
Pressing and holding PULSE on the Centrifuge, Clinical gives a quick spin: the rotor accelerates to the required speed and stays there until the button is released, which is useful for brief spin-downs between steps.

Is the lid of the Centrifuge, Clinical locked during a run?
Yes. The Centrifuge, Clinical has an auto-lock lid that stays locked while the rotor is spinning and releases automatically when the run is finished, saving time and protecting samples from heat build-up.

Who supplies the Centrifuge, Clinical?
The Centrifuge, Clinical is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company quotes it with the right rotor configuration for hospitals, diagnostic laboratories, colleges and distributors in India and international markets.

Can a calibration certificate be provided for the Centrifuge, Clinical?
Availability of a calibration certificate for the Centrifuge, Clinical is confirmed when we quote. Contact us with the tube sizes you run, the quantity, the delivery location and any tender documents you need from us.

Request a Quote

For a quotation on the Centrifuge, Clinical, reach us via the contact page or add it to the enquiry cart.

Last updated: 24 September 2026

Centrifuge, Clinical, Swing Out Head (Product Code: SLE/LC/12) is a multi-purpose programmable centrifuge used to spin samples in medical, clinical, cytology, chemistry, pharmacy and biotechnology laboratories. Supplied with a swing out head rotor (maximum 4000 rpm), it holds up to 4 x 100 mL, identifies rotors automatically and stores 9 routine procedures, making it versatile pharmacy lab equipment in India as well as a clinical centrifuge. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Swing Out Clinical Centrifuge Used For?

The swing out buckets carry tubes out towards the horizontal as the rotor spins, giving a flat, well-defined sediment that suits cytology preparations, urine sediment, blood fractionation and other layered separations. With the included head limited to 4000 rpm and other rotor types able to take the system up to 6000 rpm, one instrument can cover gentle clinical spins as well as harder chemistry or pharmacy separations.

Store routine procedures in the 9 program memories so staff recall a method instead of re-entering it for every run, and use the acceleration and brake settings for soft starts and stops when layers are delicate. The Speed/RCF switch displays whichever value your method specifies. Allow for the 36 kg weight and the 445 x 579 x 269 mm footprint when planning bench space; biotechnology groups also use it as cell biology equipment for harvesting cells from larger tubes.

What to Specify When Ordering

• Any rotors needed beyond the included swing out head, with the tube sizes they must take
• Tube size and number of tubes per run
• Confirmation that a 220/240 V, 50/60 Hz supply is available at the installation site
• Quantity and delivery location in India or abroad

Supplier

Jain Scientific Equipments Private Limited, the Ambala, Haryana company behind the ScienceLab name, supplies this centrifuge and its optional rotors to clinical, pharmacy, research and teaching laboratories and to dealers in India and international markets. Tender and institutional buyers who need vendor details can use GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Background on the business is in our company profile.

Related Laboratory Equipment

Rotors, tubes and alternatives for multi-format centrifugation:

• Fixed Angle Rotor — a fixed-angle rotor in our centrifuge range; confirm fit with this model before ordering.
• Centrifuge Tubes — tubes for loading the swing out buckets.
• Oak Ridge Centrifuge Tubes — a sturdy tube style often chosen for higher-force spins.
• Test Tube Rack SS — for staging balanced tube pairs before a run.
• Centrifuge, Clinical — a clinical model with PULSE quick spin for routine blood tubes.

See every model in the Centrifuges category.

Frequently Asked Questions

Which rotor is supplied with the Centrifuge, Clinical, Swing Out Head?
The Centrifuge, Clinical, Swing Out Head is supplied with a swing out head rotor rated to a maximum of 4000 rpm. Other swing-out and fixed-angle rotors are available as accessories, and the centrifuge identifies the fitted rotor automatically.

Why is a 300–6000 rpm range quoted for the Centrifuge, Clinical, Swing Out Head?
The 300–6000 rpm range of the Centrifuge, Clinical, Swing Out Head depends on rotor type. With the included swing out head, 4000 rpm is the limit; higher speeds apply only to rotors rated for them. The maximum RCF is listed as 4300 x g.

Can a fixed-angle rotor be added to the Centrifuge, Clinical, Swing Out Head later?
Yes, the accessory range for the Centrifuge, Clinical, Swing Out Head includes swing-out and fixed-angle rotors, with 9 rotor types listed. Contact us to confirm which rotor, such as our Fixed Angle Rotor, suits your tubes and this model.

What does the program memory of the Centrifuge, Clinical, Swing Out Head store?
The Centrifuge, Clinical, Swing Out Head stores up to 9 routine procedures, so staff can recall a method instead of re-entering speed, time and acceleration settings for every run, which simplifies repeated work and reduces set-up errors.

What electrical supply does the Centrifuge, Clinical, Swing Out Head need?
The Centrifuge, Clinical, Swing Out Head runs on 220/240 V, 50/60 Hz at 6.3 A. Allow bench space for its 445 x 579 x 269 mm footprint and 36 kg weight when planning where it will be installed.

Which safety devices are fitted to the Centrifuge, Clinical, Swing Out Head?
The Centrifuge, Clinical, Swing Out Head has an autolocking lid (door), imbalance detection (IMB), and monitoring of motor temperature, rotor speed and chamber temperature, as listed in its technical specifications.

Who supplies the Centrifuge, Clinical, Swing Out Head?
The Centrifuge, Clinical, Swing Out Head is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company quotes it with any extra rotors for institutions, dealers and importers in India and international markets.

Is a calibration certificate available for the Centrifuge, Clinical, Swing Out Head?
Availability of a calibration certificate for the Centrifuge, Clinical, Swing Out Head is agreed at quotation stage. Contact us with the rotors you need, the quantity and the delivery location in India or abroad.

Request a Quote

To get a quotation for the Centrifuge, Clinical, Swing Out Head with any extra rotors, use our contact page or the enquiry cart.

Last updated: 24 September 2026

Centrifuge, High Speed (Product Code: SLE/LC/13) is a high-speed micro-centrifuge used for specimen preparation in molecular and cellular biology and for research work such as sedimenting cells and viruses and separating sub-cellular organelles. It spins from 200 to 15000 rpm in 10 rpm steps, generates up to 21380 x g and carries an autoclavable 24 x 1.5/2.0 ml aluminium rotor. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as cell biology equipment for Indian and overseas laboratories.

Specifications

What Is the High Speed Micro-Centrifuge Used For?

Molecular biology work relies on a high-speed micro-centrifuge at almost every step: pelleting nucleic acids after alcohol precipitation, spin-column purification, clearing lysates and concentrating bacteria or cells. With four rotor options the same instrument can also take 5 ml tubes, 0.5 ml tubes and PCR 8-strips, so a lab can move from sample preparation to reaction set-up without changing machines, which is worth weighing when planning PCR equipment in India for a new lab.

The anti-overflow rotor stops tubes leaking during a run and causing microbial contamination, and the rotor can be autoclaved between users. Read speed and G-force on the LCD, let the timer count only once the target speed is reached, and use the Pulse button for a short spin. For heat-sensitive samples keep an eye on the temperature display, since the multi-flow air cooling helps keep the rotor cool.

What to Specify When Ordering

• Which of the four rotors you need: 24 x 0.2/0.5/1.5/2 ml, 5 ml x 18, 0.5 ml x 36 or PCR8 x 4
• Adapters for 0.5 ml or 0.2 ml tubes in the standard rotor
• Quantity and delivery location in India or abroad
• Any tender paperwork required with the quotation

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, supplies the Centrifuge, High Speed and its rotor options to research, university and hospital laboratories and to distributors in India and international markets. The company confirms which rotors are included before it quotes. Our company profile has the details.

Related Laboratory Equipment

Consumables and instruments used around a high-speed micro-centrifuge:

• Micro Centrifuge Tube, 1.5ml — tubes for the 24-place aluminium rotor.
• PCR Tube Rack — holds PCR strips before they go into the PCR rotor option.
• Filtered Micropipette Tips — barrier tips that help limit cross-contamination in molecular work.
• Micropipette — for accurate small-volume transfers into micro tubes.
• Micro Centrifuge — a 12-place micro centrifuge for smaller sample batches.

Explore the complete Centrifuges range.

Frequently Asked Questions

Which rotors are available for the Centrifuge, High Speed?
The Centrifuge, High Speed is described with a 24 x 1.5/2.0 ml aluminium rotor, and four rotors are available in total: 5 ml x 18, 0.2/0.5/1.5/2 ml x 24, 0.5 ml x 36 and PCR8 x 4. Confirm with us which rotors your quotation includes.

Can 0.2 ml and 0.5 ml tubes be used in the Centrifuge, High Speed?
Yes. Smaller 0.5 ml and 0.2 ml tubes fit the Centrifuge, High Speed with adapters, and the rotor options also include a 0.5 ml x 36 rotor and a PCR8 x 4 rotor for PCR strips.

What are the maximum speed and G-force of the Centrifuge, High Speed?
The Centrifuge, High Speed reaches 15000 rpm and 21380 x g, adjustable in 10 rpm and 10 x g steps, with a listed speed accuracy of ±20 rpm. Both RPM and G-force are shown on the LCD screen.

Is the Centrifuge, High Speed a refrigerated centrifuge?
The Centrifuge, High Speed is described with a special multi-flow air cooling system and a temperature display rather than refrigeration. If your protocol requires active cooling to a set temperature, talk to us before ordering.

Can the rotor of the Centrifuge, High Speed be autoclaved?
Yes. The 24 x 1.5/2.0 ml rotor of the Centrifuge, High Speed is made from high-strength aluminium and is fully autoclavable, and its anti-sample-overflow design helps stop tubes leaking during a run.

Who supplies the Centrifuge, High Speed?
The Centrifuge, High Speed is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company quotes it with the rotors and adapters you need for research, university and hospital laboratories in India and international markets.

Is a calibration certificate available for the Centrifuge, High Speed?
Availability of a calibration certificate for the Centrifuge, High Speed is set out in our quotation on request. Contact us with the rotors and adapters you need, the quantity and any tender paperwork.

Request a Quote

For a quotation on the Centrifuge, High Speed and its rotor options, write to us through the contact page or use the enquiry cart.

Last updated: 24 September 2026

Fixed Angle Rotor (Product Code: SLE/LC/14) is a centrifuge rotor accessory, designated 30-15, used to spin 30 tubes of 15 mL at once in a compatible laboratory centrifuge. It suits clinical, teaching and research laboratories that process large batches, and buyers adding capacity to a laboratory centrifuge in India should confirm fit with us before ordering. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Fixed Angle Rotor Used For?

The Fixed Angle Rotor is used to pellet cells, precipitates and debris from a large batch of 15 mL tubes in one run. Every tube sits at the same constant angle to the spin axis, so particles travel only a short distance before reaching the outer wall of the tube and then slide down to form a compact pellet. A 30-place layout is handy when an entire class set or a full morning of samples needs to be spun together.

Fill tubes to matching volumes and place them in diametrically opposite positions; if you are not using every position, keep the load symmetrical around the rotor. Never run the rotor above the lower of the rotor's and the centrifuge's rated limits, so ask us for the rating before first use. After each session, rinse off any spills, dry the cavities fully and inspect them for corrosion or cracks.

What to Specify When Ordering

• The make and model of the centrifuge the rotor will be fitted to
• Number of rotors required
• Whether 15 mL tubes should be quoted with the rotor

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies the Fixed Angle Rotor to laboratories, service teams and dealers in India and international markets. Because rotor fit depends on the centrifuge, the company checks your machine's make and model before it quotes. See our company profile to learn more about the company.

Related Laboratory Equipment

Centrifuges and tubes that go with a 15 mL fixed angle rotor:

• Centrifuge, Clinical, Swing Out Head — a multi-rotor centrifuge whose accessory range includes fixed-angle rotors; confirm fit before ordering.
• Universal Centrifuge — offered with a choice of rotors; ask whether this rotor suits your configuration.
• Centrifuge Tubes — tubes to load the 15 mL positions.
• Oak Ridge Centrifuge Tubes — an alternative tube style; check its size against the rotor cavities.
• Test Tube Rack SS — for arranging a full batch of tubes in balanced pairs.

Find matching machines in our Centrifuges category.

Frequently Asked Questions

How many tubes does the Fixed Angle Rotor hold?
The Fixed Angle Rotor, designated 30-15, holds 30 tubes of 15 mL each, so a full class set or a large batch of samples can be spun together in a single run on a compatible centrifuge.

Which centrifuge does the Fixed Angle Rotor fit?
The compatible centrifuge for the Fixed Angle Rotor is not specified in the listing. Send us the make and model of your centrifuge through our contact page and we will confirm whether the rotor fits before you order.

What is the maximum rated speed of the Fixed Angle Rotor?
A speed or RCF rating for the Fixed Angle Rotor is not listed on this page. Request it from us before first use, and never run the rotor above the lower of the rotor's and the centrifuge's rated limits.

What angle are tubes held at in the Fixed Angle Rotor?
The tube angle of the Fixed Angle Rotor is not stated in the documentation. If your method depends on a particular angle, please ask us for the figure before ordering so you can check it against the protocol.

Can the Fixed Angle Rotor run with only some positions filled?
Yes, the Fixed Angle Rotor can run partly loaded as long as the tubes are arranged symmetrically with matching volumes, so the load stays balanced around the spin axis. Never run it with tubes bunched on one side.

Who supplies the Fixed Angle Rotor?
The Fixed Angle Rotor is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company confirms fit with your centrifuge and quotes rotors singly or in quantity for laboratories and dealers in India and international markets.

How should the Fixed Angle Rotor be cleaned?
Clean the Fixed Angle Rotor with a mild detergent, rinse it and dry it completely, paying attention to the tube cavities. Whether it can be autoclaved is not stated, so check with us before steam sterilising it.

Request a Quote

For a quotation on the Fixed Angle Rotor, contact us via the contact page or add it to the enquiry cart with your centrifuge details.

Last updated: 24 September 2026