Scientific Lab Plasticware

Beakers (Product Code: SLE/P/01) are basic transparent polypropylene beakers used to hold, mix and pour liquids in school, college and clinical laboratories. Lab staff choose them where glass breakage is a worry, and they carry raised graduations and a tapered spout in capacities from 50 to 2000 ml. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab plastic ware supplier in India for single sizes or a full beaker set for school labs.

Specifications

What Are Polypropylene Beakers Used For?

These beakers handle the everyday bench jobs that do not need heat: dissolving salts at room temperature, holding samples and rinse water, collecting filtrate, and carrying solutions between benches. The raised graduations give a quick volume check without printed marks that wear off, and the tapered spout gives a controlled pour into a funnel or flask. Because they are autoclavable, microbiology and clinical labs also use them for media handling and for sterilising before reuse.

Beaker graduations are for approximate volumes, so use a measuring cylinder or volumetric glassware when accuracy matters. Do not place polypropylene beakers over a flame or on a hot plate; a borosilicate glass beaker is the right choice for heating. For strong oxidising acids or aromatic and chlorinated solvents, check compatibility before long contact.

What to Specify When Ordering

• The capacities you need within the 50 to 2000 ml range.
• The quantity of each capacity, for example per bench or per lab.
• Whether you also need the tall-form Beakers with Handle for larger volumes.
• The delivery location, in India or abroad.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies these polypropylene Beakers from Ambala, Haryana, as part of its Scientific Lab Plasticware range. Schools, colleges, hospital and diagnostic labs, dealers and importers in India and international markets can combine them with bottles, cylinders and other plastic ware in one order. Read more on the company profile.

Related Scientific Lab Plasticware

These items are often ordered with polypropylene beakers for the same bench work:

• Beakers with Handle — tall-form handled beakers for larger volumes and easier carrying.
• Beaker, Polypropylene, Set of 4 — a ready-made set for students who need several sizes at once.
• Measuring Cylinder Set of 5 — for measuring volumes more accurately than beaker graduations allow.
• Stirring Rod, Polypropylene — for mixing solutions without scratching the beaker wall.
• Glass Beaker — the choice when a solution has to be heated.

View the full Scientific Lab Plasticware range for bottles, funnels, racks and more.

Frequently Asked Questions

What sizes are the polypropylene Beakers available in?
The Beakers (SLE/P/01) are listed in capacities from 50 to 2000 ml. Tell us exactly which sizes and how many of each you need, and the quotation will list every capacity separately so you can match it to your lab inventory.

Can these Beakers be autoclaved?
Yes, the polypropylene Beakers are listed as autoclavable, so they can be sterilised and reused in microbiology and clinical work. Place them upright or on their side with space around them, and let them cool fully before handling or stacking.

Can the polypropylene Beakers be heated on a hot plate or burner?
No, the polypropylene Beakers should not be placed over a flame or on a hot plate, because the plastic will soften. Use them for room-temperature work and autoclaving, and choose a borosilicate glass beaker whenever a solution needs direct heating.

How accurate are the graduations on the Beakers?
The raised graduations on the Beakers are meant for approximate volumes, and the listing does not give a tolerance. For accurate measurement use a measuring cylinder, pipette or volumetric flask, and use the beaker for mixing, holding and pouring.

Which chemicals can the polypropylene Beakers hold?
The Beakers are listed with very good chemical resistance and suit most aqueous acids, bases and salt solutions used in teaching labs. Strong oxidising acids and some organic solvents can attack polypropylene, so ask us or check a compatibility chart for those.

Who supplies the Beakers, and can I order in bulk?
The Beakers are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. Single sizes, mixed-size lots and bulk or tender quantities can be quoted for schools, colleges, dealers and importers in India and international markets.

Request a Quote

List the capacities and quantities of Beakers you need on the contact page, or add them to the enquiry cart with the rest of your plastic ware so one quotation covers everything.

Last updated: 24 September 2026

Beakers with Handle (Product Code: SLE/P/02) are tall-form, transparent polypropylene beakers with a handle, used to prepare, carry and pour larger volumes of liquid in teaching, clinical and industrial laboratories. Chemistry and microbiology staff use them for bulk solutions, and they come in seven sizes from 50 mL to 5,000 mL, all autoclavable. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, alongside other chemistry lab equipment for school labs in India.

Specifications

What Are Beakers with Handle Used For?

The handle is what sets these beakers apart: a litre or more of liquid is heavy and slippery to hold by the body alone, so the handle gives a firm, safe grip when carrying distilled water, diluting stock solutions or pouring buffer into a reservoir. The tall form keeps liquid further from the rim, which reduces splashing when a batch is stirred. The 3,000 mL and 5,000 mL sizes are useful for making up class quantities of a reagent in one go.

Being autoclavable polypropylene, the beakers can be sterilised for microbiology media work and reused. Keep them away from flames and hot plates, and pour slowly from the larger sizes, supporting the base with the other hand when the beaker is full.

What to Specify When Ordering

• Which of the seven sizes you need: 50, 250, 500, 1,000, 2,000, 3,000 or 5,000 mL.
• The number of beakers in each size.
• Whether you also need plain spouted Beakers for small-volume bench work.
• The delivery address and any tender reference.

Supplier

These Beakers with Handle are supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, within its Scientific Lab Plasticware range. Buyers completing vendor registration can note the supplier’s CIN U29309HR2020PTC087597 and GSTIN 06AAECJ8618A1ZT. Schools, colleges, hospitals, dealers and importers in India and international markets can find more on the ScienceLab profile.

Related Scientific Lab Plasticware

These items fit the same work of preparing and moving larger volumes:

• Beakers — plain polypropylene beakers with a tapered spout for smaller bench volumes.
• Measuring Jug, Polypropylene — an alternative when a measured pour matters more than a tall form.
• Polypropylene Carboys — for storing and dispensing a large batch once it is mixed.
• Stirring Rod, Polypropylene — for mixing inside the tall beaker without scratching it.

See the complete Scientific Lab Plasticware category for more plastic ware.

Frequently Asked Questions

What sizes do the Beakers with Handle come in?
The Beakers with Handle (SLE/P/02) are listed in seven sizes: 50, 250, 500, 1,000, 2,000, 3,000 and 5,000 mL. You can order a single size or a mix of sizes, and the quotation will show each one separately.

What does tall form mean on the Beakers with Handle?
Tall form means the Beakers with Handle are taller and narrower than a standard low-form beaker of the same volume. The liquid sits further below the rim, which reduces splashing during stirring and pouring, and the handle makes full beakers easier to carry.

Are the Beakers with Handle autoclavable?
Yes, the Beakers with Handle are made of autoclavable polypropylene, so they can be steam-sterilised and reused. Leave space between beakers in the autoclave and allow them to cool completely before filling or stacking them again.

Can the Beakers with Handle be used for heating?
No, the Beakers with Handle are polypropylene and should not be used over a flame or on a hot plate, because the plastic will soften. Prepare warm solutions in borosilicate glassware and transfer them once cool, or use these beakers for room-temperature work.

Who supplies the Beakers with Handle?
The Beakers with Handle are supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, from Ambala, Haryana, India. The company supplies plastic ware to schools, colleges, hospitals, dealers and importers in India and international markets.

What should a quotation request for the Beakers with Handle include?
A quotation request for the Beakers with Handle should list each size needed, the quantity per size and the delivery location. Adding any tender reference or packing requirement helps ScienceLab prepare an accurate quotation for delivery in India or abroad.

Request a Quote

Send the sizes and quantities of Beakers with Handle through the contact page, or add them to the enquiry cart with carboys, jugs and other plastic ware for a single quotation.

Last updated: 24 September 2026

Widemouthed Wash Bottles (Product Code: SLE/P/03) are 500 mL (16 oz) squeeze bottles used to rinse glassware, wash down precipitates and add liquid drop by drop in chemistry, biology and clinical labs. Students and technicians like them because the wide mouth makes refilling quick and clean, and the standard spout delivers either a single drop or a needle-sharp stream. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a laboratory equipment supplier in India for teaching and routine labs.

Specifications

What Are Widemouthed Wash Bottles Used For?

A wash bottle is the most-used tool on a chemistry bench. It rinses the last traces of a solution from a beaker into a volumetric flask, washes a precipitate down the side of a filter funnel, and brings a flask up to the mark one drop at a time. The needle-sharp stream reaches corners of glassware that a tap cannot, while a gentle squeeze gives a single controlled drop.

The wide mouth is the practical advantage of this bottle: it can be refilled straight from a carboy or jug without a funnel, and its inside is easy to clean when the contents change. Label each bottle with what it holds, such as distilled water or ethanol, and cut the tip back only a little at a time, because a trimmed tip cannot be made finer again.

Supplier

Jain Scientific Equipments Private Limited supplies the Widemouthed Wash Bottles from Ambala, Haryana, under its ScienceLab trading name, as part of the Scientific Lab Plasticware range. Schools, colleges, pathology and industrial labs, dealers and importers in India and international markets can order them with beakers, bottles and funnels on one enquiry. More about the company is on the profile page.

Related Scientific Lab Plasticware

Other rinsing and filtration items that work with this wash bottle:

• Unitary Wash Bottles — one-piece bottle and tubing design, offered in more than one size.
• Polythene Wash Bottles — an alternative wash bottle for general rinsing.
• Wash Bottle LDPE with Narrow Mouth — a narrow-mouth version for labs that prefer a smaller opening.
• Polythene Filter Funnels — used with the wash bottle when rinsing precipitates during filtration.

Browse all Scientific Lab Plasticware for related bottles and containers.

Frequently Asked Questions

What is the capacity of the Widemouthed Wash Bottles?
The Widemouthed Wash Bottles (SLE/P/03) hold 500 mL, which is 16 oz. That size is large enough to rinse a full set of glassware between refills yet still comfortable to squeeze with one hand during titration or filtration work.

Why choose a widemouthed wash bottle?
A widemouthed wash bottle can be refilled quickly from a carboy or jug without spilling or using a funnel, and the inside is easy to clean when you switch liquids. The Widemouthed Wash Bottles combine this easy filling with a standard spout for controlled delivery.

How is the flow controlled on the Widemouthed Wash Bottles?
The Widemouthed Wash Bottles deliver a single drop with a light squeeze or a needle-sharp stream with a firmer one. If you need more flow, the tip can be cut back to increase delivery; trim a little at a time, since it cannot be reversed.

What material are the Widemouthed Wash Bottles made from?
The Widemouthed Wash Bottles are listed as LDPE and polypropylene, which suit distilled water and most aqueous solutions. If you plan to fill them with organic solvents, ask us first so we can confirm the materials of each part before you order.

Who supplies the Widemouthed Wash Bottles, and in what quantities?
The Widemouthed Wash Bottles are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. Single bottles, bench sets and bulk quantities can be quoted for schools, colleges, labs, dealers and importers in India and international markets.

Request a Quote

Tell us how many Widemouthed Wash Bottles you need through the contact page, or add them to the enquiry cart with your other bench plastic ware for a combined quotation.

Last updated: 24 September 2026

Narrow Mouthed Bottles (Product Code: SLE/P/04) are polypropylene bottles with liner-less polypropylene caps, used to store and pour liquid reagents, buffers and samples in school, college and routine laboratories. Chemistry and biology labs stock them in several sizes, from 30 mL for student reagent sets up to 2,000 mL for stock solutions. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of the plastic ware and lab consumables it supplies across India.

Specifications

What Are Narrow Mouthed Bottles Used For?

A narrow neck is the right shape for liquids: it pours in a controlled stream, limits splashing and slows evaporation between uses. In practice the small 30 mL and 60 mL sizes suit student reagent sets and sample collection, the 125–500 mL sizes serve as bench bottles for acids, bases and indicator solutions, and the 1,000 mL and 2,000 mL sizes hold the stock from which smaller bottles are refilled.

Because the caps are liner-less, there is no separate liner to trap residue, fall out or react with the contents, which also makes washing simpler. Fill the bottles through a funnel, label every bottle with its contents and date, and keep light-sensitive reagents in amber glass instead.

What to Specify When Ordering

• The capacities you need from 30, 60, 125, 250, 500, 1,000 and 2,000 mL.
• The quantity of each size, for example one set per student bench.
• Whether any reagents are light-sensitive and need an amber glass alternative.
• Your delivery location in India or abroad.

Supplier

The Narrow Mouthed Bottles are supplied by Jain Scientific Equipments Private Limited, the Ambala, Haryana company that trades as ScienceLab, within its Scientific Lab Plasticware range. Schools, colleges, testing labs, dealers and importers in India and international markets can order single sizes or mixed sets. Company details are on the ScienceLab profile.

Related Scientific Lab Plasticware

These items complete a reagent storage and dispensing set-up:

• Polyethylene Widemouthed Bottles — the wide-mouth choice for powders and solids.
• Funnels Set, Polythene — for filling narrow necks without spills.
• Dropping Bottle — for indicators and reagents that are added drop by drop.
• Reagent Bottle Narrow Mouth, Amber Glass — for reagents that must be kept out of light.

The full Scientific Lab Plasticware range lists more bottles and containers.

Frequently Asked Questions

What capacities are the Narrow Mouthed Bottles available in?
The Narrow Mouthed Bottles (SLE/P/04) come in seven capacities: 30, 60, 125, 250, 500, 1,000 and 2,000 mL. Labs usually combine small sizes for student reagent sets with one or two large sizes for stock solutions.

What is a liner-less cap on the Narrow Mouthed Bottles?
A liner-less cap closes the Narrow Mouthed Bottles without a separate disc or wad inside the cap. With no liner there is nothing to trap residue, drop into the reagent or need replacing, and the polypropylene cap washes as easily as the bottle.

Should I choose narrow-mouthed or wide-mouthed bottles?
Choose the Narrow Mouthed Bottles for liquids, because the small opening pours in a controlled stream and limits spills and evaporation. Choose wide-mouthed bottles for powders, crystals and specimens that must be spooned in or out.

Which liquids can be stored in the Narrow Mouthed Bottles?
The Narrow Mouthed Bottles are polypropylene, which suits most aqueous acids, bases, salt solutions and buffers used in teaching labs. Strong oxidising agents and some organic solvents can attack the plastic, so ask us before storing them, and use amber glass for light-sensitive reagents.

Who supplies the Narrow Mouthed Bottles, and can I order mixed sizes?
The Narrow Mouthed Bottles are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. Mixed sizes, single-size lots and bulk quantities can be quoted for schools, colleges, laboratories, dealers and importers in India and international markets.

Request a Quote

List the capacities and quantities of Narrow Mouthed Bottles on the contact page, or add them to the enquiry cart together with funnels and other bottles you need.

Last updated: 24 September 2026

Unitary Wash Bottles (Product Code: SLE/P/05) are plastic wash bottles whose bottle and delivery tubing are moulded in one piece, used to rinse glassware and dispense wash liquids in teaching, research and clinical labs. Because there is no joint between bottle and tube, there is nothing to work loose or leak, and the whole contents can be dispensed without tipping or shaking. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a school lab equipment supplier in India, in three listed sizes.

Specifications

What Are Unitary Wash Bottles Used For?

On a busy student bench, the weak point of an ordinary wash bottle is the joint where the tube passes through the cap: it loosens, drips and lets liquid run down the hand. The one-piece design of the Unitary Wash Bottles removes that joint, so the bottle can be squeezed hard, knocked over or passed around a class without leaking. And since the whole contents can be dispensed without tipping, the bottle stays upright until the last of the liquid is used.

Use the fine stream for rinsing burettes, pipettes and the walls of titration flasks, and cut the tip back a little if you need faster flow for washing large glassware. Keep separate, clearly labelled bottles for distilled water, ethanol or other wash liquids so they are never mixed up.

What to Specify When Ordering

• Which listed size you need — 125, 500 or 1000 — and confirm the unit with us.
• The number of bottles of each size.
• The liquids you plan to use, so we can check they suit the plastic.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, supplies the Unitary Wash Bottles within its Scientific Lab Plasticware range. They can be ordered by schools, universities, hospital and industrial labs, dealers and importers in India and international markets, on their own or with other bench plastic ware. See the company profile for more.

Related Scientific Lab Plasticware

These items are often used alongside Unitary Wash Bottles:

• Widemouthed Wash Bottles — a 500 mL wash bottle with a wide mouth for fast refilling.
• Polythene Wash Bottles — another wash bottle option for general rinsing.
• Plastic Wash Bottle 250ml — a mid-size wash bottle for clinical and utility use.
• Narrow Mouthed Bottles — for storing the stock liquid used to refill wash bottles.

Explore the Scientific Lab Plasticware category for more bottles and bench items.

Frequently Asked Questions

What makes the Unitary Wash Bottles different from ordinary wash bottles?
The Unitary Wash Bottles (SLE/P/05) have the bottle and delivery tubing moulded in one piece for strength. With no separate joint between tube and bottle, there is nothing to loosen or leak, which suits student benches where bottles are squeezed hard and handled often.

Can the whole contents be used without tipping the bottle?
Yes, the Unitary Wash Bottles are designed so the entire contents can be dispensed without tipping or shaking the bottle. The user simply squeezes it upright, which keeps the stream steady and avoids the drips that come from turning a bottle upside down.

What sizes are the Unitary Wash Bottles available in?
The Unitary Wash Bottles are listed in sizes 125, 500 and 1000, but the listing does not state the unit. Please confirm the size and unit with us through the contact page before ordering, so the quotation matches exactly what your lab expects.

How do I get a stronger flow from the Unitary Wash Bottles?
The dispensing tip of the Unitary Wash Bottles gives a fine stream as supplied and can be cut back to increase the flow. Trim a small amount at a time with clean scissors, because a tip that has been cut shorter cannot be made finer again.

What plastic are the Unitary Wash Bottles made of?
The Unitary Wash Bottles listing describes the material only as plastic and does not name the polymer. They suit distilled water and common aqueous wash liquids; if you plan to use organic solvents, ask us to confirm compatibility before you buy.

Who supplies the Unitary Wash Bottles?
The Unitary Wash Bottles are supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, from Ambala, Haryana, India. Single bottles and bulk quantities can be quoted for schools, laboratories, dealers and importers in India and international markets.

Request a Quote

Send the size and quantity of Unitary Wash Bottles you need through the contact page, or add them to the enquiry cart with the rest of your plastic ware for one quotation.

Last updated: 24 September 2026

Polyethylene Widemouthed Bottles (Product Code: SLE/P/06) are translucent high-density polyethylene bottles with natural polypropylene screw closures, used to store solids, powders and samples in school, college and field laboratories. The wide mouth lets a spatula in and makes the bottles easy to clean, and they come in 125, 250, 500 and 1000 mL capacities. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a chemistry consumables supplier in India for teaching and testing labs.

Specifications

What Are Polyethylene Widemouthed Bottles Used For?

Wide-mouth bottles are the standard store for anything that has to be scooped rather than poured: salts and crystals for practical classes, powdered reagents, soil and sediment samples from field work, seeds, and small specimens. The opening is wide enough for a spatula or spoon, so material can be taken out without tipping the bottle, and the translucent HDPE lets you judge how much is left without opening it.

The same wide mouth makes the bottles quick to wash and dry when they are reused for a new substance. Tighten the polypropylene screw closure after every use to keep out moisture, label the bottle with contents and date, and keep liquids that need a controlled pour in narrow-mouthed bottles instead.

What to Specify When Ordering

• Which capacities you need: 125, 250, 500 or 1000 mL.
• The number of bottles in each capacity.
• What the bottles will hold, so we can advise on suitability.
• Your delivery location in India or abroad.

Supplier

Jain Scientific Equipments Private Limited supplies the Polyethylene Widemouthed Bottles from Ambala, Haryana, under the ScienceLab name, within its Scientific Lab Plasticware range. For export paperwork and vendor forms, the supplier holds Importer-Exporter Code AAECJ8618A (DGFT) and GSTIN 06AAECJ8618A1ZT. Schools, colleges, testing labs, dealers and importers in India and international markets can read more on the company profile.

Related Scientific Lab Plasticware

These items suit the same storage and sampling work:

• Narrow Mouthed Bottles — polypropylene bottles for liquids that need a controlled pour.
• Bottle, Polyethylene, Widemouthed — another wide-mouth polyethylene bottle in the same range.
• Spatula, Polypropylene — for scooping powders and crystals out through the wide mouth.
• Specimen Container, PP — for smaller samples that do not need a full bottle.

See the whole Scientific Lab Plasticware range for more storage options.

Frequently Asked Questions

What capacities do the Polyethylene Widemouthed Bottles come in?
The Polyethylene Widemouthed Bottles (SLE/P/06) are listed in four capacities: 125, 250, 500 and 1000 mL. Most labs pick small sizes for student practical sets and the larger sizes for bulk solids or field samples.

What are the bottle and cap made of?
The Polyethylene Widemouthed Bottles are made of translucent high-density polyethylene and closed with natural polypropylene screw closures. HDPE is tough and resists most aqueous chemicals, while the screw closure keeps moisture and dust away from the contents.

What should the Polyethylene Widemouthed Bottles be used for?
The Polyethylene Widemouthed Bottles suit solids and samples that are scooped rather than poured, such as salts, powders, crystals, soil, seeds and small specimens. The wide mouth also makes them easy to clean and reuse when the contents change.

Can I see how full the bottles are without opening them?
Yes, the Polyethylene Widemouthed Bottles are translucent, so the level of the contents can usually be seen through the wall. They are not glass-clear, so for close inspection of a sample you should still open the bottle or transfer a little to a dish.

Who supplies the Polyethylene Widemouthed Bottles?
The Polyethylene Widemouthed Bottles are supplied by Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab from Ambala, Haryana, India. Single capacities, mixed sets and bulk quantities can be quoted for buyers in India and international markets.

Request a Quote

Send the capacities and quantities of Polyethylene Widemouthed Bottles through the contact page, or add them to the enquiry cart with spatulas and other storage items for one quotation.

Last updated: 24 September 2026

Pneumatic Trough (Product Code: SLE/P/07) is a water trough with a built-in bridge, used to collect gases over water in school and college chemistry practicals. Teachers pick it because the coloured trough is resilient, rustproof, lightweight and noise free, and its bridge holds four 8-oz widemouthed bottles at once. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, alongside the other gas collection apparatus schools in India use for these experiments.

Specifications

What Is a Pneumatic Trough Used For?

A pneumatic trough is the classic way to collect a gas that does not dissolve much in water, such as oxygen or hydrogen prepared in class. The trough is filled with water, a bottle or gas jar is filled, inverted and stood on the bridge, and the delivery tube from the gas generator is led underneath. Bubbles rise into the bottle and push the water out, so students can see exactly how much gas has been produced.

The built-in bridge means no separate beehive shelf is needed, and holding four bottles lets a group collect several samples in a row for tests such as the glowing splint or the lighted splint. Lead the overflow outlet to a sink or bucket so excess water drains away, and take the delivery tube out of the water before stopping any heating, so water cannot be sucked back into hot glassware. Being rustproof, the trough can simply be rinsed and left to dry.

What to Specify When Ordering

• The number of troughs, usually one per practical group.
• Whether you also need widemouthed bottles or gas jars to stand on the bridge.
• Tubing for the 1/4-inch inlet connection and overflow outlet.
• Any colour preference, which we will confirm on the quotation.

Supplier

The Pneumatic Trough is supplied by Jain Scientific Equipments Private Limited, the Ambala, Haryana company that trades as ScienceLab, as part of its Scientific Lab Plasticware range. Schools, junior colleges, coaching institutes, dealers and importers in India and international markets can order it with gas jars, tubing and delivery tubes for a complete gas-collection set-up. Company information is on the ScienceLab profile.

Related Scientific Lab Plasticware

These items complete a gas preparation and collection experiment:

• Gas Jar, Glass — a jar that can be filled with water and inverted in the trough to collect gas.
• Gas Jar Cover — seals a filled gas jar when it is lifted out for testing.
• Delivery Tube — carries gas from the generating flask to the trough.
• Rubber Tubing — flexible connections between the apparatus and the trough fittings.

More plastic ware is listed in the Scientific Lab Plasticware category.

Frequently Asked Questions

What is the Pneumatic Trough used for?
The Pneumatic Trough (SLE/P/07) is used to collect gases over water in chemistry practicals. Bottles or gas jars filled with water stand inverted on its bridge, and gas from a delivery tube bubbles up into them, displacing the water so the gas can be collected and tested.

What does the built-in bridge on the Pneumatic Trough hold?
The built-in bridge of the Pneumatic Trough holds four 8-oz widemouthed bottles. That lets a group collect several gas samples one after another without a separate beehive shelf, which keeps the set-up simple and stable on the bench.

What size tubing fits the Pneumatic Trough?
Both the inlet connection and the overflow outlet of the Pneumatic Trough take tubing of 1/4-inch diameter, which is about 6 mm. Tell us if you would like matching tubing quoted with the trough so the set arrives ready to connect.

What is the Pneumatic Trough made of?
The Pneumatic Trough is described as a coloured trough that is resilient, rustproof, lightweight and noise free. The listing does not name the exact material, colour or overall dimensions, so please ask us through the contact page if you need them for a tender or bench layout.

How should the Pneumatic Trough be cleaned after use?
Empty the Pneumatic Trough, rinse it with clean water and leave it upside down to drain and dry. Because it is rustproof, it can be stored wet without corrosion, but drying it keeps the connections clean and prevents water marks.

Who supplies the Pneumatic Trough, and can schools order several?
The Pneumatic Trough is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. Single troughs, one per practical group, or bulk quantities can be quoted for schools, dealers and importers in India and international markets.

Request a Quote

Ask for a Pneumatic Trough quotation on the contact page, or add it to the enquiry cart with gas jars, delivery tubes and tubing so the whole gas-collection set can be priced together.

Last updated: 24 September 2026

Polypropylene Carboys (Product Code: SLE/P/08) are heavy-duty, autoclavable polypropylene containers with a stopcock, used to store and dispense distilled water, buffers and other bulk liquids in teaching, clinical and industrial laboratories. Lab managers choose them for their offset neck, carrying handles and leak-proof stopcock with a boss fitting, in 5, 10, 15 and 20 L capacities. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for school lab equipment bulk supply and routine lab use.

Specifications

What Are Polypropylene Carboys Used For?

A carboy with a stopcock turns a shelf into a dispensing station. Distilled or deionised water, saline, buffer and wash solutions can be drawn off into a beaker or wash bottle without lifting the container, which saves time and avoids spills. Because the carboys are autoclavable, microbiology labs also use them to prepare and hold sterile water or media in bulk.

The front-moulded graduations let staff check the level of every carboy at a glance when several stand side by side, and the offset neck makes refilling and pouring easier. Stand the carboy with the stopcock over the edge of a bench or shelf so a vessel fits underneath. Remember that a full 20 L carboy of water weighs about 20 kg, so use both handles, and loosen the cap before autoclaving so pressure can equalise.

What to Specify When Ordering

• The capacity you need: 5 L, 10 L, 15 L or 20 L.
• The number of carboys of each capacity.
• The liquid to be stored, so compatibility can be confirmed.
• Your delivery location in India or abroad.

Supplier

Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, supplies the Polypropylene Carboys from Ambala, Haryana, within the Scientific Lab Plasticware range. Schools, colleges, hospitals, water-testing and industrial labs, dealers and importers in India and international markets can order single carboys or several capacities together. Find out more on the company profile.

Related Scientific Lab Plasticware

These items work alongside a carboy in a bulk-liquid set-up:

• Dispensing Jug — a smaller spigot container for bench-side dispensing.
• Aspirator with stopcock — another stopcock container for dispensing liquids.
• Widemouthed Wash Bottles — easy to refill straight from the carboy stopcock.
• Beakers with Handle — for mixing a batch of solution before it goes into the carboy.

Visit the Scientific Lab Plasticware page for more containers and bottles.

Frequently Asked Questions

What capacities are the Polypropylene Carboys available in?
The Polypropylene Carboys (SLE/P/08) are listed in 5 L, 10 L, 15 L and 20 L capacities. Smaller carboys suit bench-top dispensing, while the 15 L and 20 L sizes are useful as central stores for distilled water or wash solutions.

Can the Polypropylene Carboys be autoclaved?
Yes, the Polypropylene Carboys are made of autoclavable polypropylene, so they can hold sterile water or media. Always loosen the cap before a cycle so pressure can equalise, and let the carboy cool fully before tightening the cap or filling it again.

How is liquid dispensed from the Polypropylene Carboys?
Liquid is drawn from the Polypropylene Carboys through a leak-proof, heavy-duty stopcock fitted with a boss for extra strength. The offset neck also makes it easy to fill the carboy and, when needed, to pour from it using the handles.

Can the level be read when several carboys stand together?
Yes, the Polypropylene Carboys have graduations moulded on the front, so the level of each one can be read even when they are used in a row. Treat the marks as a guide to the volume left rather than an accurate measuring scale.

Which liquids can be stored in the Polypropylene Carboys?
The Polypropylene Carboys suit distilled and deionised water, saline, buffers and most aqueous acid, base and salt solutions. Some organic solvents and strong oxidisers can attack polypropylene, so tell us what you plan to store and we will confirm suitability before you order.

Who supplies the Polypropylene Carboys?
The Polypropylene Carboys are supplied by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, from Ambala, Haryana, India. Single carboys and bulk quantities can be quoted for laboratories, schools, dealers and importers in India and international markets.

Request a Quote

Send the capacities and quantities of Polypropylene Carboys you need through the contact page, or add them to the enquiry cart with jugs and wash bottles for one combined quotation.

Last updated: 24 September 2026

Dispensing Jug (Product Code: SLE/P/09) is a high-density polyethylene jug with a quarter-turn spigot, used to store and dispense water, wash solutions and other liquids at the bench or sink in teaching and routine laboratories. Staff find it easy to handle thanks to its rounded corners, sturdy handle and bottom grip, and it measures 25 × 25 × 38 cm. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as practical lab equipment for colleges and schools in India.

Specifications

What Is a Dispensing Jug Used For?

A dispensing jug sits on a shelf or bench edge and delivers liquid on demand, so nobody has to lift and tip a heavy container. Labs use it for distilled water beside the titration benches, soap or detergent solution at the wash-up sink, diluted disinfectant, and rinse water in field or mobile labs. A quarter turn of the spigot starts or stops the flow, and the short outlet tube directs the stream neatly into a beaker, bottle or wash bottle.

Fill it through the 52 mm screw-capped opening, using a funnel if the source is a carboy. Loosening a cap slightly lets air in and keeps the flow from the spigot steady. Place the jug so the spigot overhangs the bench edge, and use the bottom grip together with the handle whenever the full jug has to be poured or moved.

Supplier

The Dispensing Jug is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, as part of its Scientific Lab Plasticware range. Schools, colleges, hospital and industrial labs, dealers and importers in India and international markets can order it on its own or with carboys and bottles. Learn about the company on the ScienceLab profile page.

Related Scientific Lab Plasticware

These containers and bottles fit the same dispensing workflow:

• Polypropylene Carboys — larger stopcock containers for central storage of the same liquids.
• Aspirator with stopcock — an alternative bottle-style dispenser with a stopcock.
• Measuring Jug, Polypropylene — for pouring a measured volume rather than dispensing from a spigot.
• Widemouthed Wash Bottles — refilled from the jug’s spigot for use at the bench.

Explore the Scientific Lab Plasticware category for more.

Frequently Asked Questions

What is the capacity of the Dispensing Jug?
The Dispensing Jug (SLE/P/09) listing gives its size, 25 × 25 × 38 cm, but does not state a rated capacity. Please ask us through the contact page for the nominal volume before ordering, so you can plan how often it will need refilling.

How does the spigot on the Dispensing Jug work?
The Dispensing Jug has a thread-mounted low-density polyethylene spigot that opens and closes with a quarter turn. The spigot extends 108 mm from the jug, and its outlet tube is 35 mm long and 16 mm in diameter, which gives a neat, directed stream.

What are the two openings on the Dispensing Jug for?
The Dispensing Jug has a screw-capped fill opening of 52 mm diameter for filling and cleaning, plus a screw-capped side opening of 26 mm diameter. Keeping both caps on protects the contents, and loosening one slightly helps air enter so the spigot flows steadily.

What is the Dispensing Jug made of?
The body of the Dispensing Jug is moulded from high-density polyethylene and the spigot from low-density polyethylene. Both suit water, detergent and most aqueous lab solutions; if you intend to store organic solvents, ask us to confirm compatibility first.

Who supplies the Dispensing Jug, and can I order several?
The Dispensing Jug is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. Single jugs and bulk quantities can be quoted for schools, colleges, laboratories, dealers and importers in India and international markets.

Request a Quote

Request a Dispensing Jug quotation through the contact page with your quantity and delivery location, or add it to the enquiry cart with carboys and bottles for a combined price.

Last updated: 24 September 2026

Bottle, Polyethylene, Widemouthed (Product Code: SLE/P/10) is a lightweight wide-mouth storage bottle used to hold dry chemicals, granules, specimens and bulk liquids in school, college and research laboratories. Lab technicians value its wide neck, closed by a large 110-mm plastic screw cap, which makes filling and emptying with a scoop or spatula straightforward. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of chemistry lab equipment for schools in India and abroad, at its own factory in Ambala, India.

Specifications

What Is the Widemouthed Polyethylene Bottle Used For?

In teaching laboratories this bottle serves as bulk storage for dry salts and granules, collected soil, seeds or leaf samples, and prepared solutions that do not attack polyethylene. Because it does not shatter like glass, it is a sensible piece of biology lab equipment for schools in India, where containers are carried between the storeroom, the bench and field trips.

Label every bottle with its contents and the date it was filled, and keep the screw cap closed between uses so dust and moisture stay out. Wash it with mild detergent and water before changing contents. Check chemical compatibility before storing strong oxidising agents or organic solvents, and keep the bottle away from flames and hot plates.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of this widemouthed polyethylene bottle. Production takes place at the company's own licensed factory at Saha, Ambala, Haryana, India, and bottles go factory-direct to schools, colleges, institutions, dealers and importers rather than through a trader.

ScienceLab is a registered MSME enterprise (Udyam UDYAM-HR-01-0003714) and ships export orders under Importer-Exporter Code AAECJ8618A (DGFT). For repeat orders or replacement caps, ask us and the manufacturer will respond directly. More about the company is on the ScienceLab company profile.

Related Scientific Lab Plasticware

Storerooms stocking the widemouthed bottle usually order a few of these items at the same time:

• Polyethylene Widemouthed Bottles — a second wide-mouth polyethylene bottle listing to compare when planning storage.
• Narrow Mouthed Bottles — for liquids that need controlled pouring rather than wide access.
• Spatula, Polypropylene — for scooping powders and granules out through the wide neck.
• Bottle Brush — for scrubbing the bottle clean before it is refilled.

See the complete Scientific Lab Plasticware range for beakers, wash bottles, funnels and racks.

Frequently Asked Questions

What size is the cap on the Bottle, Polyethylene, Widemouthed?
The Bottle, Polyethylene, Widemouthed (SLE/P/10) is closed with a 110-mm plastic screw cap, giving a wide opening for solids and samples. Capacity and overall dimensions are not listed here, so please confirm them through our contact page before ordering.

What material is the widemouthed polyethylene bottle made from?
The ScienceLab widemouthed bottle SLE/P/10 is made of polyethylene with a plastic screw cap, which keeps it light and far less likely to break than a glass jar if dropped. Always check that the chemical you plan to store is compatible with polyethylene.

Can the widemouthed polyethylene bottle be heated or autoclaved?
No heat or autoclave rating is listed for the Bottle, Polyethylene, Widemouthed, so use it as a room-temperature storage bottle and keep it away from burners and hot plates. If your work needs a heat-resistant container, contact ScienceLab to discuss a suitable alternative.

Who manufactures the Bottle, Polyethylene, Widemouthed?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Bottle, Polyethylene, Widemouthed as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Buyers deal directly with the manufacturer for quotations, repeat orders and replacement caps.

Can schools and importers order the widemouthed bottle in bulk?
Yes. ScienceLab supplies the Bottle, Polyethylene, Widemouthed in bulk to schools, colleges, dealers and importers across India and international markets. Send the quantity and delivery destination through the contact page, and the manufacturer will prepare a quotation.

Request a Quote

To price the Bottle, Polyethylene, Widemouthed, add it to the enquiry cart or send your quantity and delivery location through the contact page. Quotations come direct from the manufacturer.

Last updated: 24 September 2026

Azlon Dispensing Bottle (Product Code: SLE/P/11) is a round LDPE dropper bottle used to dispense indicators, stains and reagents drop by drop in school, college and research laboratories. It holds 30 ml and is fitted with a spouted dropper closure plus a captive sealing cap, so the cap stays attached to the bottle while it is in use. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, a lab plastic ware supplier serving India and international markets.

Specifications

What Is the Azlon Dispensing Bottle Used For?

Teachers use this 30 ml dropper bottle to hand out small, controlled amounts of indicator solutions, stains and test reagents at student benches, so each group works from its own bottle instead of pouring from stock. Squeezing the soft LDPE body pushes liquid out through the spout a drop at a time, which suits spot tests, food tests and indicator additions in chemistry lab equipment sets for schools in India.

Fill the bottle from a labelled stock container using a small funnel, write the reagent name on the side, and close the captive cap after every use to limit evaporation and contamination. If you trim the spout, cut off only a little at a time, because a larger opening releases bigger drops and the cut cannot be undone.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies the Azlon Dispensing Bottle from Ambala, Haryana, India. Azlon identifies a third-party brand, so ScienceLab sources this bottle and ships it to schools, colleges, laboratories, dealers and importers alongside the rest of their laboratory order. Company details are on the ScienceLab profile page.

Related Scientific Lab Plasticware

These items are often used with dropper bottles during bench tests:

• Dropping Bottle — a plain round dropping bottle for stock reagents.
• Dropper Bottle Tray — keeps a set of dropper bottles upright and together on the bench.
• Polypropylene Tiles — a spotting tile for drop-scale colour tests.
• Universal pH Indicator — an indicator that is commonly dispensed from small dropper bottles.

Explore the full Scientific Lab Plasticware category for bottles, beakers and funnels.

Frequently Asked Questions

What is the capacity of the Azlon Dispensing Bottle?
The Azlon Dispensing Bottle (SLE/P/11) has a capacity of 30 ml, and the listing also gives a size of 32 mm alongside that figure. If you need to confirm the neck or body dimension before ordering, ask us through the contact page.

What kind of closure does the Azlon Dispensing Bottle have?
The Azlon Dispensing Bottle comes with a spouted dropper closure and a captive sealing cap, so the cap stays with the bottle and reseals the spout after use. This helps keep indicators and reagents clean between lessons.

Can the spout of the Azlon Dispensing Bottle be cut?
Yes, the spouted closure of the Azlon Dispensing Bottle can be cut, which lets users change the size of the opening. Trim only a small amount at a time, because a wider tip gives larger drops and a cut spout cannot be restored.

Which liquids can be kept in the Azlon Dispensing Bottle?
The Azlon Dispensing Bottle is made of LDPE, which suits most aqueous indicators, stains and dilute reagents used in teaching labs. Check LDPE compatibility before filling it with organic solvents or strong oxidisers, and label every bottle clearly.

Who supplies the Azlon Dispensing Bottle?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, supplies the Azlon Dispensing Bottle from Ambala, Haryana, India to schools, colleges, laboratories, dealers and importers in India and international markets. Azlon is a third-party brand, and ScienceLab acts as the supplier.

What should a quotation request for the Azlon Dispensing Bottle include?
For the Azlon Dispensing Bottle (SLE/P/11), state the number of bottles, the delivery location and any other plasticware you need on the same order. Use the enquiry cart or the contact page, and ScienceLab will reply with a quotation.

Request a Quote

Send your requirement for the Azlon Dispensing Bottle through the contact page, or add it to the enquiry cart together with other items you need, and ScienceLab will prepare a quotation for delivery in India or abroad.

Last updated: 24 September 2026

Polythene Wash Bottles (Product Code: SLE/P/12) are squeeze bottles used to direct a controlled stream of distilled water or rinsing liquid onto glassware, precipitates and electrodes in chemistry and biology laboratories. Each flexible-walled bottle has an oval section, a screw cap and a bent delivery tube, and it is easily operated with one hand. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM school lab equipment manufacturer, at its own factory in Ambala, India.

Key Details

What Is a Polythene Wash Bottle Used For?

A wash bottle is the everyday rinsing tool of a practical bench. Students use it to wash the last traces of a solution from a beaker into a volumetric flask, to rinse a precipitate down the sides of a filter funnel, to clean pH electrodes between readings and to add distilled water in small, controlled amounts. The oval, flexible body is comfortable to grip, and the bent tube lets the stream be pointed exactly where it is needed.

Keep one bottle per liquid and label it clearly, for example distilled water or ethanol, so contents are never confused. Squeeze gently near the end of a volumetric fill to avoid overshooting the mark, and refill from a clean stock container rather than topping up an old supply. Wash bottles like these are standard chemistry lab equipment for schools in India and for college practical rooms.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) behind these polythene wash bottles. They are produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, universities, dealers and importers. Because the manufacturer handles enquiries itself, repeat orders and matching replacement caps or tubes can be discussed directly with us. Read more on the ScienceLab profile.

Related Scientific Lab Plasticware

Wash bottles are usually ordered with the items used in the same rinsing and filtration steps:

• Widemouthed Wash Bottles — a wash bottle style with a wider neck for easier refilling.
• Unitary Wash Bottles — another wash-bottle design from the same plasticware range.
• Polythene Filter Funnels — precipitates are rinsed into these during filtration.
• Filter Paper — sits in the funnel while solids are washed with the bottle.
• Beakers — collect rinsings and hold solutions on the bench.

Find more items in the Scientific Lab Plasticware category.

Frequently Asked Questions

How does the Polythene Wash Bottle dispense liquid?
The Polythene Wash Bottle (SLE/P/12) dispenses liquid when you squeeze its flexible wall: the pressure pushes liquid up and out through the bent tube in a thin stream. It is easily operated with one hand, leaving the other hand free to hold glassware.

What capacity are the Polythene Wash Bottles?
The capacity of the Polythene Wash Bottles (SLE/P/12) is not stated in this listing. Please tell us the volume you need through the contact page, and ScienceLab will confirm the size available before sending a quotation.

Which liquids can be used in a polythene wash bottle?
Polythene Wash Bottles are normally filled with distilled or deionised water, and many labs keep separate labelled bottles for ethanol or other rinsing liquids. Check polythene compatibility before using strong oxidisers or aggressive organic solvents, and never mix liquids in one bottle.

Why does the Polythene Wash Bottle have an oval section?
The oval section of the Polythene Wash Bottle gives flatter sides that are comfortable to grip and easy to squeeze with one hand, so the stream from the bent tube can be controlled while the other hand holds a beaker or funnel.

Who manufactures the Polythene Wash Bottles?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Polythene Wash Bottles (SLE/P/12) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy them directly from the manufacturer.

Can laboratories order polythene wash bottles in bulk?
Yes. ScienceLab supplies Polythene Wash Bottles in bulk to schools, colleges, dealers and importers in India and international markets. Include the quantity, preferred capacity and delivery location in your enquiry so the manufacturer can prepare an accurate quotation.

Request a Quote

Ready to order? Add the Polythene Wash Bottles to the enquiry cart or contact ScienceLab through the contact page with quantities and your delivery location. You will receive a quotation directly from the manufacturer.

Last updated: 24 September 2026

Pipette Filler (Product Code: SLE/P/13) is a thumb-wheel pipetting aid used to fill and drain pipettes without mouth suction in school, college and research laboratories. This red, 25 ml capacity filler is easy to use, and its finely adjustable thumb wheel makes it a practical part of a titration kit for schools in India. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is a Pipette Filler Used For?

A pipette filler replaces mouth suction whenever a volumetric or graduated pipette is filled, protecting students from swallowing or inhaling reagents. The top of the pipette is pushed gently into the filler, and turning the thumb wheel draws liquid upward; turning it back lets liquid run out under control, so the meniscus can be set on the mark and a measured volume delivered into a flask.

Hold the pipette close to its top end when inserting it, not by the bulb, to lower the risk of breakage. Avoid drawing liquid up into the filler itself, and wipe it dry if a splash reaches it. Store it with other pipetting aids in a clean drawer so the seal stays free of dust.

What to Specify When Ordering

• Pipette size: this red filler is the 25 ml capacity model; smaller pipettes may suit the 10 ml filler listed in the same range.
• Quantity: how many titration stations or student pairs need their own filler.
• Accessories: whether pipette stands or a bulb-type filler should be quoted on the same order.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies this pipette filler from Ambala, Haryana, India as part of its offer of chemistry lab instruments. The company sources the filler and dispatches it with glassware and other bench equipment to schools, colleges, laboratories, dealers and importers in India and international markets. Learn more on the ScienceLab company profile.

Related Scientific Lab Plasticware

Pipetting and titration benches are usually equipped with these items as well:

• Pipette Filler – 10ml — the smaller-capacity filler for 10 ml work.
• Bulb Type, Pipette Filler — a bulb-style alternative pipetting aid.
• Pipette Stand Rotary — keeps pipettes upright and draining between uses.
• Pipette Stand, Polypropylene — a bench stand for keeping pipettes organised.
• Burette — the other half of a pipette-and-burette titration set-up.

More pipetting and storage items are in the Scientific Lab Plasticware category.

Frequently Asked Questions

What capacity is the Pipette Filler SLE/P/13?
The Pipette Filler SLE/P/13 is the 25 ml capacity model in red. To be sure it fits the top of your pipettes, send the pipette type and size through the contact page and ScienceLab will confirm before quoting.

How is the thumb wheel on the Pipette Filler used?
On the ScienceLab Pipette Filler, rolling the thumb wheel one way draws liquid up into the pipette and rolling it the other way lets liquid out. The fine adjustment makes it easy to set the meniscus exactly on the graduation mark.

Why use a pipette filler instead of mouth pipetting?
A pipette filler such as SLE/P/13 removes the need to suck liquid up by mouth, which can lead to swallowing or inhaling reagents. Using a filler is standard safe practice in school and college laboratories, and it gives better control over the volume delivered.

What colour is the 25 ml Pipette Filler?
The 25 ml Pipette Filler (SLE/P/13) is red. Distinct colours help students and technicians pick the correct filler quickly when several pipetting aids are kept together in the same drawer or tray.

Who supplies the Pipette Filler SLE/P/13?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, supplies the Pipette Filler (SLE/P/13) from Ambala, Haryana, India to schools, colleges, laboratories, dealers and importers. Orders can be combined with pipettes, burettes and other chemistry bench items in one quotation.

What details are needed to quote for pipette fillers?
To quote for the Pipette Filler (SLE/P/13), ScienceLab needs the quantity, confirmation that the 25 ml size suits your pipettes, and the delivery location. Send these through the enquiry cart or the contact page to receive a quotation.

Request a Quote

Add the Pipette Filler to the enquiry cart, or send quantities through the contact page, and ScienceLab will reply with a quotation covering this filler and any other pipetting aids you need.

Last updated: 24 September 2026

Three-Way Tap for Syringe (Product Code: SLE/P/14) is a Luer-fitting valve used to connect syringes to other syringes, tubing and vessels in gas collection apparatus and liquid-transfer set-ups in school and college laboratories. It has two female and one male Luer connectors, and at any position of the valve lever two of those connectors are in communication. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

What Is a Three-Way Syringe Tap Used For?

In chemistry and physics practicals, a three-way tap lets one syringe be connected to two different destinations without pulling fittings apart. Typical uses include drawing a gas sample from a reaction flask into a syringe and then turning the lever to push it into a second syringe or tube, measuring the volume of gas given off in a reaction, and moving small volumes of liquid between two syringes in a closed system.

Push the Luer fittings together with a slight twist so they seal, and check which two ports are open before moving any liquid or gas. Turn the lever slowly during an experiment to avoid sudden pressure changes. Rinse the tap with water after use and let it dry before storage.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies this three-way tap from Ambala, Haryana, India to schools, colleges, laboratories, dealers and importers. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). Further details are on the company profile page.

Related Laboratory Equipment

Gas-collection and liquid-transfer experiments often combine the tap with these items:

• Stopcock — a separate valve for controlling flow in glass apparatus.
• Rubber Tubing — links flasks and other apparatus in gas and liquid set-ups.
• Gas Washing Bottle — for bubbling a collected gas through a liquid.
• Pneumatic Trough — the classic water-displacement method of collecting gas.

Browse the Scientific Lab Plasticware category for more bench fittings and containers.

Frequently Asked Questions

What connectors does the Three-Way Tap for Syringe have?
The Three-Way Tap for Syringe (SLE/P/14) has two female Luer connectors and one male Luer connector. This arrangement lets Luer-tipped syringes and other Luer-fitted accessories be joined directly to the tap in a laboratory set-up.

How many ports are open at once on the three-way tap?
At any position of the valve lever, two of the three connectors on the Three-Way Tap for Syringe are in communication. Turning the lever changes which pair is connected, so flow can be redirected without disconnecting anything.

Which experiments use a three-way syringe tap?
The Three-Way Tap for Syringe is used in gas collection and measurement experiments, gas sampling from reaction vessels and closed transfers of liquid between two syringes. It suits chemistry and physics practicals where a route must be switched without opening the system.

Are syringes included with the Three-Way Tap for Syringe?
The listing for the Three-Way Tap for Syringe (SLE/P/14) covers the tap itself, and syringes are not mentioned as included. If you need syringes or tubing supplied with it, list them in your enquiry through the contact page.

Who supplies the Three-Way Tap for Syringe?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, supplies the Three-Way Tap for Syringe from Ambala, Haryana, India to schools, colleges, laboratories, dealers and importers in India and international markets.

What information does a quotation for the three-way tap need?
A quotation for the Three-Way Tap for Syringe (SLE/P/14) needs the quantity, the delivery location and any matching items such as tubing or syringes. Institutions that need vendor registration details can request them along with the quotation.

Request a Quote

Send your quantity for the Three-Way Tap for Syringe through the contact page or add it to the enquiry cart; ScienceLab will reply with a quotation and can include vendor registration details for institutional purchase files.

Last updated: 24 September 2026

Dropping Bottle (Product Code: SLE/P/15) is a 125 ml plain round LDPE bottle used to store and dispense bench reagents and indicator solutions in school and college chemistry laboratories. Made in natural LDPE and supplied with a cap, it is a lightweight container for the reagent sets used in salt analysis at school level. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 125 ml Dropping Bottle Used For?

Chemistry teachers fill these bottles with bench reagents such as dilute acids, alkalis, indicators and test solutions, so that every practical station has its own labelled supply. The 125 ml size holds enough for reagents that are used again and again through a lesson, which cuts down trips to the stock cupboard. They are a basic item on the checklist for a new school lab setup in India.

Label each bottle with the reagent name and concentration, and keep caps on between uses to prevent evaporation and cross-contamination. Natural LDPE lets light through, so keep light-sensitive solutions such as silver nitrate in amber glass instead. Rinse the bottle with distilled water before refilling it with a different reagent.

OEM Manufacturer

The Dropping Bottle is manufactured by Jain Scientific Equipments Private Limited, which trades as ScienceLab and acts as OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order these bottles factory-direct, and quotations are issued by the manufacturer rather than a reseller. Ask us about repeat orders or matching caps. See the ScienceLab company profile for more about the business.

Related Scientific Lab Plasticware

Reagent stations built around the dropping bottle often include these items:

• Dropper Bottle Tray — organises a set of reagent bottles at each practical station.
• Azlon Dispensing Bottle — a smaller dropper bottle with a spouted closure for indicators.
• Amber Dropping Bottle — a glass option for light-sensitive reagents.
• Polypropylene Tiles — a spotting tile for drop tests with the dispensed reagents.

The full Scientific Lab Plasticware category lists more bottles and containers.

Frequently Asked Questions

What is the capacity of the Dropping Bottle SLE/P/15?
The Dropping Bottle SLE/P/15 holds 125 ml. It is a plain round bottle made of natural LDPE and is supplied with a cap, which makes it suitable for bench reagents that are used repeatedly during a practical session.

Does the Dropping Bottle come with a cap?
Yes, the ScienceLab Dropping Bottle (SLE/P/15) is supplied with a cap. The listing describes a plain round bottle with cap; if you need a particular dropper tip or closure style, confirm it through the contact page before ordering.

Can light-sensitive reagents be stored in this dropping bottle?
The Dropping Bottle SLE/P/15 is made of natural LDPE, which is translucent and lets light through. For light-sensitive solutions such as silver nitrate, use an amber glass dropping bottle and keep the LDPE bottle for general bench reagents.

Why choose an LDPE dropping bottle over glass?
An LDPE dropping bottle such as SLE/P/15 is lightweight and much less likely to shatter if knocked off a bench, which makes it a safer choice for student practicals. Glass remains preferable for solvents or reagents that attack polyethylene.

Who manufactures the 125 ml Dropping Bottle?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the 125 ml Dropping Bottle (SLE/P/15) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, and supplies it factory-direct to schools, colleges and dealers.

How do I order dropping bottles for a whole lab?
To order Dropping Bottles (SLE/P/15) for a full lab, count the practical stations and the reagents per station, then send the total quantity and delivery location through the enquiry cart or contact page. ScienceLab supplies India and international markets.

Request a Quote

Place the Dropping Bottle in the enquiry cart or share your requirement through the contact page. ScienceLab, as the manufacturer, will send a direct quotation for the quantity you need.

Last updated: 24 September 2026

Bulb Type, Pipette Filler (Product Code: SLE/P/16) is a squeeze-bulb pipetting aid used to draw up and release noxious solutions, microbial suspensions and other harmful or unpleasant liquids in microbiology, biology and chemistry laboratories. It consists of a bulb and three pinch valves that control the flow of liquid into and out of the pipette, with a listed capacity of 54 mm, 50 ml. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, alongside its microbiology lab equipment for India and international markets.

Specifications

What Is a Bulb Pipette Filler Used For?

The bulb filler is chosen when the liquid in a pipette should never come near the user's mouth or face, for example bacterial cultures in a microbiology practical or corrosive and foul-smelling reagents in chemistry. On a typical three-valve filler, with the pipette seated in the lower end, one valve empties air from the squeezed bulb, a second draws liquid up to the mark and the third lets it run out into the receiving vessel.

Practise with water before handling cultures or hazardous reagents, and never let liquid rise into the bulb. After pipetting microbial suspensions, follow your laboratory's decontamination procedure for the pipette and any surfaces it touched. Inspect the bulb regularly for cracks or loss of suction.

What to Specify When Ordering

• Pipette sizes and top diameters in use, since this filler is listed as 54 mm, 50 ml.
• Quantity needed for each microbiology or chemistry bench.
• Whether thumb-wheel fillers should also be quoted for routine, non-hazardous pipetting.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the bulb-type pipette filler from Ambala, Haryana, India. It is sourced for, and shipped to, schools, colleges, microbiology laboratories, dealers and importers, often together with pipettes, culture ware and other bench items. More about the company is on the ScienceLab profile page.

Related Scientific Lab Plasticware

Laboratories using a bulb filler commonly stock these related items:

• Pipette Filler — a red 25 ml thumb-wheel filler for routine pipetting.
• Pipette Filler – 10ml — a filler for smaller pipettes.
• Pipette Stand Rotary — holds pipettes upright to drain after cleaning.
• Inoculation Loops — another basic tool for handling microbial cultures.

See more in the Scientific Lab Plasticware category.

Frequently Asked Questions

What liquids is the Bulb Type, Pipette Filler meant for?
The Bulb Type, Pipette Filler (SLE/P/16) is meant for pipetting noxious solutions, microbial suspensions and other harmful or unpleasant liquids. It keeps the liquid away from the user's mouth and gives valve-controlled filling and emptying of the pipette.

How do the three valves on the bulb pipette filler work?
The Bulb Type, Pipette Filler has a bulb and three pinch valves that control the influx and efflux of pipette contents. Typically one valve releases air from the squeezed bulb, one draws liquid up and one lets it drain out.

What does the listed capacity of 54 mm, 50 ml mean?
The Bulb Type, Pipette Filler is listed as 54 mm, 50 ml. Because the listing does not say which dimension the 54 mm refers to, send your pipette sizes through the contact page and ScienceLab will confirm the fit before quoting.

Is the bulb pipette filler suitable for sterile work?
No sterility claim is made for the Bulb Type, Pipette Filler (SLE/P/16). Treat it as general bench equipment and follow your laboratory's own cleaning and decontamination procedures after handling microbial suspensions or harmful solutions.

Who supplies the Bulb Type, Pipette Filler?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, supplies the Bulb Type, Pipette Filler (SLE/P/16) from Ambala, Haryana, India to schools, colleges, microbiology laboratories, dealers and importers in India and international markets.

What should a quote request for bulb pipette fillers include?
When requesting a quote for the Bulb Type, Pipette Filler (SLE/P/16), include the quantity, the pipette sizes you use and the delivery location. ScienceLab can quote thumb-wheel fillers and pipette stands on the same enquiry if needed.

Request a Quote

Add the Bulb Type, Pipette Filler to the enquiry cart or describe your pipetting needs on the contact page, and ScienceLab will send a quotation.

Last updated: 24 September 2026

Funnels Set, Polythene (Product Code: SLE/P/17) is a set of three plastic funnels used to transfer liquids or sand between containers and to compare the flow rates of sand or water in primary and secondary school science. The funnels measure 75 mm, 95 mm and 120 mm in diameter and are made from flexible yet strong polythene. The set is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of junior science lab equipment, at its own factory in Ambala, India.

Specifications

What Is a Polythene Funnel Set Used For?

With three mouth sizes in one set, pupils can investigate how funnel size changes how quickly sand or water flows through, timing each funnel and recording the results in a table. The same funnels double as everyday pouring aids for moving water, sand or dry granules from a jug into a narrow-necked bottle without spills. The set also fits neatly into a junior lab kit for primary school classrooms.

Because polythene flexes rather than cracks, the set suits younger students and sand-tray activities. Keep separate funnels for sand and for liquids where possible, rinse and dry them after use, and keep them away from hot liquids and flames. For filtration with filter paper, a dedicated filter funnel gives a better fit.

What to Specify When Ordering

• Number of sets (each set contains three funnels of 75 mm, 95 mm and 120 mm).
• Whether the funnels are for flow-rate investigations, general pouring or both, so companion items can be quoted.
• Any filter funnels, beakers or measuring cylinders needed for the same activity.

OEM Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited manufactures this polythene funnel set as the OEM (original equipment manufacturer). The funnels are produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, education departments, dealers and importers. Buying from the manufacturer means quotations, repeat orders and replacement funnels come from one source, so ask us for details. Visit the ScienceLab profile to learn more.

Related Scientific Lab Plasticware

Flow-rate and pouring activities usually call for a few of these items too:

• Polythene Filter Funnels — a filter funnel for separation work with soils and solutions.
• Beakers — collect the water or sand that passes through each funnel.
• Measuring Cylinder Set of 5 — measures the volumes used in flow-rate tests.
• Funnels — another funnel listing in the laboratory equipment range.

More classroom plasticware is listed under Scientific Lab Plasticware.

Frequently Asked Questions

How many funnels are in the Funnels Set, Polythene?
The Funnels Set, Polythene (SLE/P/17) contains three funnels with diameters of 75 mm, 95 mm and 120 mm. Having three sizes lets students compare flow rates and choose the right funnel for each container they fill.

What are the polythene funnels made of?
The funnels in the Funnels Set, Polythene are made from flexible yet strong polythene. The material bends rather than cracking if dropped, which suits younger learners, but it should be kept away from flames and very hot liquids.

Can the Funnels Set, Polythene be used for sand flow experiments?
Yes. The Funnels Set, Polythene is intended for determining flow rates of sand or water as well as for simple transfer of liquids or sand from one container to another, making it a practical choice for primary and middle-school science activities.

Is the polythene funnel set suitable for filtration?
The Funnels Set, Polythene is described for flow-rate work and simple transfers rather than filtration. For filtering with filter paper, ScienceLab lists separate polythene filter funnels intended for separation work with soils and solutions.

Who manufactures the Funnels Set, Polythene?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Funnels Set, Polythene (SLE/P/17) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Schools and dealers receive quotations directly from the manufacturer.

Can schools order the funnel set for several classrooms?
Yes. ScienceLab supplies the Funnels Set, Polythene in classroom and bulk quantities to schools, dealers and importers in India and international markets. State the number of sets and the delivery location in your enquiry through the contact page to receive a quotation.

Request a Quote

To order the Funnels Set, Polythene, add it to the enquiry cart or contact us through the contact page with the number of sets required. The quotation comes straight from the manufacturer in Ambala.

Last updated: 24 September 2026

Polypropylene Tiles (Product Code: SLE/P/18) are white spotting tiles used to carry out drop-scale colour tests and small reactions side by side in school and college chemistry and biology laboratories. Each tile measures 118 × 93 × 11 mm and has 12 cavities of 22 mm diameter, so a dozen samples or reagent combinations can be compared at once. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM lab equipment manufacturer, at its own factory in Ambala, India.

Specifications

What Are Polypropylene Spotting Tiles Used For?

A white spotting tile makes small colour changes easy to see. Students place a few drops of a test solution in each cavity and add an indicator or reagent, for example to test for starch with iodine, to compare the pH of household liquids with universal indicator, or to preview the end-point colour of a titration before the full run. Twelve cavities let a whole series of samples or concentrations be laid out in order, so results can be read and recorded at a glance.

Polypropylene tiles are lighter than ceramic spotting tiles and less likely to chip when handled by students. Rinse the cavities with water straight after use so coloured residues do not stain, and dry the tile before storing it. They make a compact addition to any chemistry teaching kit for schools in India.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, manufactures these polypropylene tiles as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Because the tiles come straight from the maker, schools, colleges, dealers and importers can order classroom quantities and repeat batches without a middleman. Details on the company are on the ScienceLab profile.

Related Scientific Lab Plasticware

Drop tests on a spotting tile usually need these companion items:

• Dropping Bottle — holds the reagents that are dropped into each cavity.
• Azlon Dispensing Bottle — dispenses indicators a drop at a time.
• Universal pH Indicator — a common reagent for colour tests on the tile.
• Stirring Rod, Polypropylene — mixes the drops inside each cavity.

Browse the whole Scientific Lab Plasticware category for more bench items.

Frequently Asked Questions

How many cavities does the Polypropylene Tile have?
Each Polypropylene Tile (SLE/P/18) has 12 cavities, each 22 mm in diameter, set in a white tile measuring 118 × 93 × 11 mm. This lets students run a dozen drop tests side by side and compare colours directly.

Why are the Polypropylene Tiles white?
The Polypropylene Tiles are white because a white background shows faint colour changes clearly, such as the blue-black of starch with iodine or the shades of universal indicator. This makes results easier to read and record accurately.

Can the Polypropylene Tiles be heated?
No heat rating is given for the Polypropylene Tiles (SLE/P/18), so use them for room-temperature drop tests only and keep them away from burners and hot plates. For reactions that need heating, use a test tube or an evaporating dish instead.

How should polypropylene spotting tiles be cleaned?
Rinse the Polypropylene Tiles with water straight after use, using a soft brush or cloth for any residue, and let them dry before storage. Prompt rinsing stops coloured indicators and iodine from staining the white polypropylene surface.

Who manufactures the Polypropylene Tiles SLE/P/18?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Polypropylene Tiles (SLE/P/18) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, supplying schools, colleges, dealers and importers directly.

What does a quotation for spotting tiles need?
A quotation for the Polypropylene Tiles (SLE/P/18) needs the number of tiles, the delivery location and any dropper bottles or indicators you want on the same order. Send the details through the enquiry cart or the contact page.

Request a Quote

Add the Polypropylene Tiles to the enquiry cart or send the number of tiles you need via the contact page; the quotation will come direct from ScienceLab as the manufacturer.

Last updated: 24 September 2026

Test Tube Rack (Product Code: SLE/P/19) is a polypropylene rack used to hold test tubes upright during experiments, incubation and storage in school, college and research laboratories. It has 60 wells of 17 mm, measures 245 × 108 × 72 mm, folds and snaps together for easy assembly, and is autoclavable. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as a practical test tube rack for schools in India and overseas.

Specifications

What Is a Polypropylene Test Tube Rack Used For?

A 60-place rack keeps a whole class set or a long series of dilutions organised in rows, so tubes can be labelled by position and results compared along the series. Students use it during food tests, enzyme and temperature experiments, microbiology culture work and chemical reactions that need tubes to stand for a set time. Because it is autoclavable, microbiology labs can autoclave the rack along with used culture tubes.

The 17 mm wells suit tubes up to that outside diameter, so check your tube size before ordering. Snap the panels together on a flat surface and make sure every joint locks before loading tubes. Clean the rack with warm water and mild detergent between practicals.

What to Specify When Ordering

• Outside diameter of your test tubes (the wells are 17 mm).
• Number of racks needed for the class or laboratory.
• Any matching accessories, such as test tube brushes or holders.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which acts as OEM (original equipment manufacturer) for this polypropylene test tube rack and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Racks are dispatched factory-direct to schools, colleges, research institutions, dealers and importers. Ask us about repeat orders or extra racks to match an existing lab set. See the ScienceLab company profile for background on the business.

Related Scientific Lab Plasticware

Test tube work at the bench usually involves these items as well:

• Test Tube Rack, Polypropylene — another polypropylene rack in the same range.
• Universal Tube Rack — a rack option for other tube types.
• Polyprop Test Tube Basket — holds loose tubes for washing or carrying.
• Brush Test Tube — cleans tubes before they go back in the rack.
• Test Tube Holder — grips a single tube while it is heated.

Explore the Scientific Lab Plasticware category for further racks and containers.

Frequently Asked Questions

How many test tubes does the Test Tube Rack SLE/P/19 hold?
The Test Tube Rack SLE/P/19 has 60 wells, each 17 mm across, so it holds up to 60 test tubes that fit that well size. The assembled rack measures 245 × 108 × 72 mm.

Is the Test Tube Rack autoclavable?
Yes, the ScienceLab Test Tube Rack (SLE/P/19) is made of polypropylene and is autoclavable, so microbiology and biology labs can autoclave it with used culture tubes. Follow your autoclave's normal cycle and let the rack cool before handling it.

How is the polypropylene test tube rack assembled?
The Test Tube Rack is easy to assemble because its polypropylene panels fold and snap together. Press each joint firmly until it locks, and check that the rack stands level before loading it with tubes.

What size test tubes fit the 17 mm wells?
The wells of the Test Tube Rack (SLE/P/19) are 17 mm, so choose tubes whose outside diameter is no larger than that. If you use several tube sizes, send them through the contact page and ScienceLab will suggest suitable racks.

Who manufactures the Test Tube Rack SLE/P/19?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Test Tube Rack (SLE/P/19) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, and supplies it directly to schools, colleges, dealers and importers.

Can the test tube rack be ordered in bulk for school labs?
Yes. ScienceLab supplies the Test Tube Rack in bulk for school and college labs in India and international markets. Share the number of racks, the tube size you use and the delivery location to receive a quotation from the manufacturer.

Request a Quote

For a quotation on the Test Tube Rack, add it to the enquiry cart or write to us via the contact page with the rack quantity and tube size. The manufacturer will reply with a direct quote.

Last updated: 24 September 2026

Polythene Filter Funnels (Product Code: SLE/P/20) are small plastic funnels used for filtration and separation work with soils and solutions in school, college and field laboratories. At 38 mm they suit small-volume filtrations with folded filter paper, and the plastic is listed as unbreakable, which makes them a safer choice than glass on student benches. They are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Are Polythene Filter Funnels Used For?

In soil practicals, students shake a soil sample with distilled water and pour the mixture through filter paper in the funnel to obtain a clear extract for pH or nutrient tests. The same funnel separates precipitates from solutions in chemistry, for example when collecting an insoluble salt, and clarifies small water samples before testing. Its compact size suits the short filtrations common in school practicals, and it is equally useful as lab equipment for colleges in India running soil and water analysis.

Fold a filter paper circle into a cone, seat it in the funnel and wet it with a little distilled water so it clings to the wall before pouring. Support the funnel in a stand or on a small flask, pour down a stirring rod, and never fill the paper to the rim. Wash the funnel after soil work so fine particles do not carry over into the next filtration.

OEM Manufacturer

These filter funnels are manufactured by Jain Scientific Equipments Private Limited, trading as ScienceLab, which is the OEM (original equipment manufacturer) and produces them at its own licensed factory at Saha, Ambala, Haryana, India. Supplying factory-direct, the company serves schools, colleges, soil-testing and teaching laboratories, dealers and importers, and handles repeat orders itself. Learn more on the ScienceLab profile page.

Related Scientific Lab Plasticware

A complete filtration set-up normally combines the funnel with these items:

• Funnels Set, Polythene — larger polythene funnels for pouring and flow-rate tests.
• Filter Paper — the paper cone that sits inside the funnel.
• Water And Soil Analysis Kit — for testing the extracts collected through the funnel.
• Polythene Wash Bottles — rinse residue down the filter paper.
• Conical Flask — receives the filtrate beneath the funnel.

View more items in the Scientific Lab Plasticware category.

Frequently Asked Questions

What size are the Polythene Filter Funnels?
The Polythene Filter Funnels (SLE/P/20) are 38 mm in size. This compact funnel suits small-volume filtrations with a folded filter paper, such as clearing soil extracts or separating a small quantity of precipitate from a solution.

Are the Polythene Filter Funnels breakable?
The Polythene Filter Funnels are made of plastic that is listed as unbreakable, so they do not shatter like a glass funnel if dropped on a bench or floor. Keep them away from flames and hot liquids, which can soften polythene.

Can the Polythene Filter Funnels be used for soil analysis?
Yes. The Polythene Filter Funnels are intended for separation work with soils and solutions, making them suitable for filtering soil-water mixtures to get a clear extract for pH or nutrient tests in school, college and field laboratories.

Do the filter funnels come with filter paper?
Filter paper is not listed as included with the Polythene Filter Funnels (SLE/P/20). ScienceLab supplies filter paper separately, so add it to your enquiry through the contact page and state the circle size you need for a 38 mm funnel.

Who manufactures the Polythene Filter Funnels?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Polythene Filter Funnels (SLE/P/20) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, and supplies them factory-direct to schools, colleges, dealers and importers.

How can I get a quote for polythene filter funnels?
To get a quote for the Polythene Filter Funnels, add them to the enquiry cart or send the quantity and delivery location through the contact page. ScienceLab quotes directly as the manufacturer for orders across India and international markets.

Request a Quote

Request pricing for the Polythene Filter Funnels through the contact page or the enquiry cart, and include any filter paper or wash bottles you need. The quotation will come straight from the manufacturer.

Last updated: 24 September 2026

Reagent Bottle Stopper (Product Code: SLE/P/21) is a plastic stopper used to close reagent bottles in school, college and research laboratories, keeping stored solutions free of dust and evaporation losses. It is listed in the sizes 19/26 and 38 mm, making it a handy spare part for lab equipment when an original stopper is lost or broken. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Reagent Bottle Stopper Used For?

Reagent bottles lose their usefulness quickly once a stopper goes missing: solutions evaporate, absorb moisture or carbon dioxide from the air, and collect dust. A replacement plastic stopper restores a proper closure, so stock solutions and bench reagents stay clean between practicals. Plastic stoppers are also less likely than glass ones to seize in the necks of bottles that hold alkaline solutions.

Measure the neck opening, or check the size marked on the bottle, before ordering, since the listing gives two sizes: 19/26 and 38 mm. Press the stopper in firmly but without forcing it, wipe any spilled reagent off the neck before closing, and store bottles upright.

What to Specify When Ordering

• Stopper size: 19/26 or 38 mm, matched to your bottle neck.
• Number of stoppers needed in each size.
• The bottle type and the reagent it holds, so the fit can be checked with you.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, manufactures these reagent bottle stoppers as the OEM (original equipment manufacturer) at its own licensed factory at Saha, Ambala, Haryana, India. Stoppers are supplied factory-direct to schools, colleges, laboratories, dealers and importers, often together with the bottles they close.

For institutional and tender buyers who need vendor details, the company's registrations are GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. More about the company is on the ScienceLab profile.

Related Laboratory Equipment

Stoppers are most often ordered alongside the reagent bottles and containers they serve:

• Reagent Bottle, Narrow Mouth — a glass reagent bottle for stock solutions.
• Reagent Bottle Narrow Mouth, Amber Glass — for light-sensitive stock solutions.
• Bottle Reagent, W.M. Glass — a wide-mouth glass reagent bottle for solids.
• Dropping Bottle — a plastic bottle for bench-sized quantities of reagent.

Further closures and bottles are listed in the Scientific Lab Plasticware category.

Frequently Asked Questions

What sizes is the Reagent Bottle Stopper available in?
The Reagent Bottle Stopper (SLE/P/21) is listed in two sizes: 19/26 and 38 mm. Check the neck of your reagent bottle, or tell us the bottle type through the contact page, so the correct stopper size is quoted.

What material are the reagent bottle stoppers made of?
The Reagent Bottle Stopper is made of plastic. Plastic stoppers are light, less likely to chip than glass stoppers and less prone to sticking in bottles that hold alkaline solutions, which makes them practical replacements in school storerooms.

Will the Reagent Bottle Stopper fit my existing bottles?
The Reagent Bottle Stopper will fit bottles whose necks match its listed sizes of 19/26 or 38 mm. If you are unsure, share the bottle make, capacity or neck measurement, and ScienceLab will confirm which stopper suits it before quoting.

Can a plastic stopper replace a broken glass stopper?
Yes, a plastic Reagent Bottle Stopper (SLE/P/21) can replace a lost or broken glass stopper when the neck size matches 19/26 or 38 mm. This keeps the bottle in use instead of discarding it or leaving the reagent uncovered.

Who manufactures the Reagent Bottle Stopper SLE/P/21?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Reagent Bottle Stopper (SLE/P/21) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, and supplies it directly to schools, colleges, dealers and importers.

What should an enquiry for bottle stoppers include?
An enquiry for the Reagent Bottle Stopper should list the size (19/26 or 38 mm), the quantity of each and the delivery location. Tender and institutional buyers can also ask for vendor registration details along with the quotation.

Request a Quote

Add the Reagent Bottle Stopper to the enquiry cart or send the sizes and quantities through the contact page. As the manufacturer, ScienceLab will reply with a direct quotation.

Last updated: 24 September 2026

Automatic Titrating Burette (Product Code: SLE/P/22) is a 50 ml borosilicate glass burette combined with a 1000 ml polyethylene reservoir bottle, used for repeated titrations in college, school and routine analytical chemistry laboratories. It has a Schellbach strip, blue ring graduation with 0.10 ml subdivisions, press-button dosing and a microscrew for fine end-point control. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for volumetric analysis work in India and international markets.

Specifications

What Is an Automatic Titrating Burette Used For?

An automatic burette takes the repetitive refilling out of routine titration. Titrant is stored in the 1000 ml reservoir bottle and a press button provides precise dosing, so a series of titrations can be run with far less handling of the stock solution. It suits acid–base, redox and precipitation titrations in college practicals and routine analysis, and is a step up from the simple burette in a titration kit for schools in India.

Near the end point, switch to the microscrew and let the exact spout tip deliver titrant drop by drop, reading the meniscus against the Schellbach strip and blue ring graduation. Check that the titrant is compatible with borosilicate glass and polyethylene, keep the reservoir closed to limit evaporation of standard solutions, and rinse the burette with fresh titrant before each new series.

What to Specify When Ordering

• Capacity: the listed unit is a 50 ml burette with a 1000 ml reservoir bottle.
• The titrants you will use, so compatibility with borosilicate glass and PE can be confirmed.
• Quantity, and whether burette brushes or other titration accessories are needed.
• Whether you need calibration documentation, which should be discussed with us before ordering.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies the Automatic Titrating Burette from Ambala, Haryana, India. The company sources this instrument for colleges, universities, industrial laboratories, dealers and importers, and can combine it with glassware and chemistry bench equipment in one shipment. Company background is on the ScienceLab profile page.

Related Laboratory Equipment

A titration bench built around the automatic burette usually also needs:

• Burette — a standard burette for basic titration practicals.
• Burette Brush — for cleaning the burette tube between series.
• Conical Flask — the receiving vessel during each titration.
• Methyl Red (Indicator) — an indicator used to show the end point in acid–base work.
• Titration Kit, Student, Microscience — a student kit for introductory titrations.

More items are listed in the Scientific Lab Plasticware category.

Frequently Asked Questions

What is the capacity of the Automatic Titrating Burette?
The Automatic Titrating Burette (SLE/P/22) has a 50 ml burette with 0.10 ml subdivisions, combined with a 1000 ml polyethylene reservoir bottle. The large reservoir allows many titrations to be run before the titrant needs topping up.

What accuracy does the Automatic Titrating Burette offer?
The Automatic Titrating Burette is listed as Class A with a tolerance of ±0.05 ml and 0.10 ml subdivisions. If you need calibration documentation for the unit you buy, please discuss it with ScienceLab through the contact page before ordering.

How does the Automatic Titrating Burette dispense titrant?
On the Automatic Titrating Burette, a press button gives precise dosing of titrant from the reservoir, while a microscrew and exact spout tip allow fine titration near the end point. The Schellbach strip and blue ring graduation make the meniscus easy to read.

Is the Automatic Titrating Burette breakable?
The burette tube of the Automatic Titrating Burette is borosilicate glass and should be handled with care, while the reservoir is made of polyethylene with high chemical resistance and no danger of breakage. Keep the assembly on a stable, level bench.

Who supplies the Automatic Titrating Burette SLE/P/22?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, supplies the Automatic Titrating Burette (SLE/P/22) from Ambala, Haryana, India to colleges, universities, industrial laboratories, dealers and importers in India and international markets.

What information is needed to quote for automatic burettes?
To quote for the Automatic Titrating Burette (SLE/P/22), ScienceLab needs the quantity, the titrants you plan to use, the delivery location and any accessories such as burette brushes. Send the details through the enquiry cart or the contact page.

Request a Quote

Send your requirement for the Automatic Titrating Burette through the contact page or add it to the enquiry cart; ScienceLab will prepare a quotation and advise on accessories for your titration bench.

Last updated: 24 September 2026

Micropipette (Product Code: SLE/P/24) is a variable-volume hand pipette used to measure and transfer small liquid volumes from 5 to 50 µl in biology, biotechnology, microbiology and chemistry laboratories. It is lightweight, takes standard micropipette tips, has a tip ejector, and comes with a tool and instructions for self-calibration. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its range of lab equipment for research and teaching.

Specifications

What Is a Micropipette Used For?

Micropipettes measure volumes far too small for glass pipettes or burettes. With a 5–50 µl range, this model suits loading samples into electrophoresis gel wells, preparing serial dilutions, adding enzymes or reagents to small reaction tubes and dispensing small aliquots in microbiology and biochemistry practicals.

Set the volume, press a fresh tip firmly onto the shaft, depress the plunger to the first stop, immerse the tip just below the liquid surface and release slowly. Dispense against the wall of the receiving vessel, then use the ejector to discard the tip without touching it. Keep the micropipette upright on a stand when not in use, never lay it down with liquid in the tip, and check its setting periodically with the supplied calibration tool and instructions.

What to Specify When Ordering

• Volume range: this model covers 5–50 µl; tell us if your work needs a different range.
• Tips: the quantity of standard micropipette tips to send with it.
• Number of micropipettes per bench or student group.
• Whether calibration documentation is needed, to be discussed with us before ordering.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies this micropipette from Ambala, Haryana, India. It is a sourced precision instrument, provided to schools, colleges, universities, research laboratories, dealers and importers together with tips and other consumables. See the ScienceLab profile for company information.

Related Laboratory Equipment

Micropipette users normally order these consumables and holders as well:

• Micropipette Tips — replacement tips for day-to-day pipetting.
• Filtered Micropipette Tips — filter tips for work where carry-over into the pipette matters.
• Micro Centrifuge Tube, 1.5ml — small tubes for the volumes a micropipette handles.
• Universal Tube Rack — holds tubes upright while samples are pipetted.

See the Scientific Lab Plasticware category for more liquid-handling items.

Frequently Asked Questions

What volume range does the ScienceLab Micropipette cover?
The Micropipette (SLE/P/24) is a variable-volume model covering 5 to 50 µl. The volume can be set within that range, making it suitable for small aliquots, dilutions and gel loading in teaching and research labs.

Which tips fit the Micropipette SLE/P/24?
The Micropipette SLE/P/24 is designed for standard micropipette tips. ScienceLab also supplies micropipette tips and filtered tips; tell us the quantity you need when requesting a quote so the pipette and tips can be sent together.

How is the Micropipette calibrated?
A tool and instructions for self-calibration are included with the Micropipette (SLE/P/24), so users can adjust it in the lab when routine checks show a deviation. For formal calibration documentation, please discuss your requirement with ScienceLab through the contact page.

What accuracy does the Micropipette have?
No numerical accuracy or precision figures are published for the Micropipette (SLE/P/24) on this page. If your work needs specific accuracy values, ask ScienceLab through the contact page before ordering so the details can be confirmed for you.

Who supplies the Micropipette SLE/P/24?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, supplies the Micropipette (SLE/P/24) from Ambala, Haryana, India to schools, colleges, universities, research laboratories, dealers and importers in India and international markets.

How do I order micropipettes for a class or lab?
To order the Micropipette (SLE/P/24) for a class or lab, send the number of pipettes, the quantity of tips and the delivery location through the enquiry cart or contact page. ScienceLab will reply with a combined quotation.

Request a Quote

Add the Micropipette to the enquiry cart together with tips, or send your requirement via the contact page, and ScienceLab will send a quotation.

Last updated: 24 September 2026

Pipette Stand Rotary (Product Code: SLE/P/23) is a revolving polypropylene stand used to hold pipettes upright for storage and drip-drying in chemistry, biology and microbiology laboratories. It holds up to 94 pipettes, turns on a vertical axis so any pipette can be reached from one spot, and has a lower disc with four tapered, open-bottomed troughs that cradle the tips. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of chemistry lab instruments, at its own factory in Ambala, India.

Specifications

What Is a Rotary Pipette Stand Used For?

After washing, pipettes need to stand tip-down so water can drain out and they can dry without dust settling inside. The rotary stand does this for a whole lab's stock at once, holding up to 94 pipettes, and a gentle turn brings the required size round to the user instead of reaching across the bench. The tapered troughs in the lower disc protect delicate tips, while the open bottoms let drips escape rather than pooling around them.

Sort pipettes by volume into different troughs or sectors so students can find the right one quickly. Place a tray or paper towel beneath the stand to catch drips, and take the stand apart for cleaning when residue builds up. Keeping pipettes organised like this is a simple step in any new school lab setup in India.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of this rotary pipette stand and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Stands are supplied factory-direct to schools, colleges, universities, dealers and importers, and repeat orders or replacement parts are handled by the manufacturer — ask us.

The company is incorporated as Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597) and operates its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala under Factory Licence AMB-ONLINE-CHD-J-414. Read more on the ScienceLab profile.

Related Scientific Lab Plasticware

Labs setting up a pipetting area often order these items with the rotary stand:

• Pipette Stand, Polypropylene — another polypropylene pipette stand in the same range.
• Pipette Stand, Vertical — a vertical stand option for smaller benches.
• Pipette Stand, Horizontal — keeps pipettes lying horizontal for storage.
• Pipette Filler — for filling pipettes without mouth suction before they return to the stand.
• Bulb Type, Pipette Filler — for pipetting harmful or unpleasant liquids.

Find more pipetting and storage items in the Scientific Lab Plasticware category.

Frequently Asked Questions

How many pipettes does the Pipette Stand Rotary hold?
The Pipette Stand Rotary (SLE/P/23) holds a maximum of 94 pipettes. Because the stand rotates on a vertical axis, any pipette in it can be brought within reach simply by turning the stand, which keeps the bench tidy.

How does the rotary pipette stand help pipettes drain?
The lower rotating disc of the Pipette Stand Rotary has four concentric troughs with tapered sides and open bottoms. These cradle the pipette tips protectively and let water drops run off, so washed pipettes can drain and dry standing upright.

What material is the Pipette Stand Rotary made from?
The Pipette Stand Rotary is made of polypropylene, a light, water-resistant plastic that suits wet pipettes and routine cleaning. Avoid placing hot glassware straight from a drying oven onto it; let the pipettes cool first.

Can the Pipette Stand Rotary be taken apart?
Yes. The Pipette Stand Rotary (SLE/P/23) can be easily assembled and disassembled, which makes cleaning simpler and helps when the stand has to be moved between laboratories or put away between terms.

Who manufactures the Pipette Stand Rotary?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, manufactures the Pipette Stand Rotary (SLE/P/23) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, and supplies it directly to schools, colleges, dealers and importers.

What details are needed for a pipette stand quotation?
For a quotation on the Pipette Stand Rotary (SLE/P/23), send the number of stands, the delivery location and any pipettes or fillers to include. Use the enquiry cart or the contact page, and the manufacturer will reply directly.

Request a Quote

Price the Pipette Stand Rotary by adding it to the enquiry cart or by writing to us through the contact page. Quotations are issued directly by ScienceLab as the manufacturer.

Last updated: 24 September 2026

Polyprop Test Tube Basket (Product Code: SLE/P/25) is a polypropylene basket used to rinse, carry and store test tubes and other glassware in school, college and research laboratories. Lab assistants use it to gather tubes after a practical, wash the whole batch at once and move it to a drying or storage shelf without handling each tube separately. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of lab plastic ware, at its own factory in Ambala, India.

Key Details

What Is the Test Tube Basket Used For?

Teaching laboratories use test tubes in large numbers and wash them after almost every session. A basket lets you collect used tubes at the bench, carry them to the sink in one trip, rinse the load together and leave it to drain. Between practicals the same basket keeps clean glassware grouped on a shelf, so small items are not rolling loose in a drawer.

For good results, rinse tubes soon after use so residues do not dry on, and scrub stubborn deposits with a test tube brush before the tubes go into the basket. Avoid stacking heavy glassware over thin-walled tubes, and carry the basket with both hands when it is full of wet glass. It is a practical addition to school chemistry lab equipment in India, where one lab assistant often prepares glassware for several classes a day.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades under the ScienceLab name, is the original equipment manufacturer (OEM) of the Polyprop Test Tube Basket. The basket is produced at the company’s own licensed factory at Saha, Ambala, Haryana, so schools, colleges and dealers buy it from the maker rather than from a trading intermediary. For replacement baskets or repeat orders, ask us and the request is handled by the manufacturer itself. You can read about the company on the ScienceLab company profile page.

Related Scientific Lab Plasticware

These items are used with the test tube basket when cleaning, drying and storing tubes:

• Brush Test Tube — scrubs residues from tube walls before rinsing.
• Test Tube Rack — holds tubes upright during experiments at the bench.
• Test Tube Rack, Polypropylene — a plastic rack for storing tubes in rows.
• Widemouthed Wash Bottles — squeeze bottles for the final rinse.
• Universal Tube Rack — an adjustable rack for tubes of different sizes.

Browse the full range in Scientific Lab Plasticware.

Frequently Asked Questions

What is the Polyprop Test Tube Basket used for?
The Polyprop Test Tube Basket is used for rinsing, transporting and storing test tubes and other glassware. It lets laboratory staff wash a batch of tubes together and carry them between the bench, the sink and the storage shelf in a single trip.

What material is the test tube basket made from?
The Polyprop Test Tube Basket is made of polypropylene, as the “Polyprop” in its name indicates. Polypropylene is a lightweight plastic that does not rust, which suits a basket that goes in and out of rinse water many times a day.

How many test tubes does the Polyprop Test Tube Basket hold?
The tube capacity and dimensions of the Polyprop Test Tube Basket are not listed on this page. Tell us the tube size you use through the contact page and we will confirm how many tubes fit before you order.

Can the basket hold glassware other than test tubes?
Yes. The Polyprop Test Tube Basket is intended for test tubes and other glassware, so it can also hold small items of laboratory glassware that need rinsing, carrying or storing between practical sessions. Avoid overloading it with heavy pieces.

Who manufactures the Polyprop Test Tube Basket?
The Polyprop Test Tube Basket is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and produces it at its own factory in Saha, Ambala, Haryana, India. Schools and dealers place orders and receive quotations from the maker itself.

Can schools order test tube baskets in bulk?
Yes. Schools, colleges, dealers and importers can order the Polyprop Test Tube Basket in quantity for India and international markets. Send the quantity and delivery location through the enquiry cart or contact page to receive a quotation.

Request a Quote

To order the Polyprop Test Tube Basket, send your quantity and delivery details through the contact page or add the item to the enquiry cart. Your quotation comes direct from the manufacturer in Ambala.

Last updated: 24 September 2026

Burette Clamp - Double (Product Code: SLE/P/26) is a stand-mounted clamp used to hold one or two burettes upright during titrations in school and college chemistry laboratories. It fits stand rods of 10 to 14 mm diameter, and rubber grips keep the burettes from slipping while students read the scale. The clamp is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Double Burette Clamp Used For?

The clamp attaches to the vertical rod of a retort stand or burette stand and holds burettes vertically above a conical flask. With two positions, a pair of students can share one stand, or one burette can carry the titrant while the second holds another solution, such as a standard for a check titration. Both scales stay at the same height, which makes side-by-side readings easier.

Before fitting, confirm that the stand rod is between 10 and 14 mm thick. Tighten the clamp so each burette hangs truly vertical, then lower it until the tip sits just inside the neck of the flask. The rubber grips hold the glass firmly, so the burette does not slide down as the stopcock is turned. When schools plan chemistry lab equipment for class titrations, a double clamp lets each stand serve two users.

What to Specify When Ordering

• The rod diameter of your existing stands (this clamp suits 10 to 14 mm rods).
• Whether you need this double clamp, the single version, or a mix of both.
• The number of clamps required per laboratory.
• Whether stands and burettes should be quoted with the clamps.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of the Burette Clamp - Double. The clamp is made and assembled at the company’s own licensed factory at Saha, Ambala, Haryana, and goes factory-direct to schools, colleges, institutions, dealers and importers. If you need replacement rubber grips or extra clamps later, ask us and the manufacturer will handle the request. More about the company is on the ScienceLab profile page.

Related Scientific Lab Plasticware

A complete titration station also needs the following items:

• Burette Clamp - Single — the one-burette version for individual stations.
• Burette — the graduated tube the clamp holds.
• Retort Stand — base and rod on which the clamp is mounted.
• Burette Stand — an alternative support for titration work.
• Burette Brush — cleans the inside of burettes after use.

See more items in Scientific Lab Plasticware.

Frequently Asked Questions

How many burettes can the Burette Clamp - Double hold?
The Burette Clamp - Double holds one or two burettes. It can be used with a single burette when only one is needed, or with two burettes so that two solutions or two students share the same stand during a titration.

Which stand rods does the Burette Clamp - Double fit?
The Burette Clamp - Double fits stand rods with a diameter of 10 to 14 mm. Measure the rod on your retort stands or burette stands before ordering; if your rods fall outside this range, contact us to discuss options.

Will the burettes slip in the Burette Clamp - Double?
The Burette Clamp - Double is fitted with rubber grips to prevent slipping. Tighten the clamp enough to hold each burette vertical without forcing the glass, and check the grip before filling the burette with solution.

Are burettes or a stand included with the Burette Clamp - Double?
This listing describes the Burette Clamp - Double itself; burettes and stands appear as separate items on our site. Tell us through the contact page if you want them quoted together and we will confirm the contents.

Who manufactures the Burette Clamp - Double?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM that makes the Burette Clamp - Double at its licensed Saha factory in Ambala, Haryana. Because you buy from the maker, replacement grips or extra clamps can be requested from the same source.

Can the double burette clamp be supplied in bulk for export?
Yes. The Burette Clamp - Double is supplied in quantity to schools, colleges, dealers and importers in India and international markets. Share the number of clamps and the destination through the enquiry cart to receive a quotation.

Request a Quote

Ask for a quotation for the Burette Clamp - Double through the contact page, or add it to the enquiry cart together with any stands and burettes you need. Prices come straight from the manufacturer.

Last updated: 24 September 2026

Burette Clamp - Single (Product Code: SLE/P/27) is a polypropylene clamp used to fix a burette to a stand rod for titration experiments in school, college and university chemistry labs. Its polypropylene body suits benches where acid and alkali solutions are handled, it fits rods from 10 to 14 mm in diameter, and rubber grips hold the burette steady. Jain Scientific Equipments Pvt Ltd (ScienceLab) makes this burette clamp as an OEM manufacturer at its own factory in Ambala, India.

Specifications

What Is the Single Burette Clamp Used For?

In an acid–base or redox titration the burette must stay perfectly still while the student opens the stopcock drop by drop and watches for the end point. The single clamp grips the burette on a retort stand rod so both hands are free, one for the stopcock and one to swirl the flask. Because the body is plastic, drips of acid or alkali from the burette tip will not rust it the way they can attack a plain steel clamp.

Fix the clamp at a height where the zero mark is close to eye level, check that the burette hangs vertical, and wipe any spills from the grips after the practical. For individual student stations the single type is the natural choice, with the double clamp kept for stands that two students share.

What to Specify When Ordering

• Stand rod diameter (the clamp is listed for 10 to 14 mm rods).
• Single or double version, and how many of each.
• Whether retort stands or burettes should be included in the same quotation.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM for the Burette Clamp - Single. It produces the clamp at its own licensed factory in Saha, Ambala, Haryana, alongside the double version, so a lab can source matching single and double clamps from the same maker in one order. Quotations are prepared by the manufacturer, not a reseller. Learn more about the company on the ScienceLab company profile.

Related Scientific Lab Plasticware

Other items used with a single burette clamp:

• Burette Clamp - Double — holds one or two burettes on a shared stand.
• Retort Stand — the rod and base the clamp fixes to.
• Burette — glass burette for measuring titrant volume.
• Automatic Titrating Burette — a self-filling option for repeated titrations.

View the whole Scientific Lab Plasticware range.

Frequently Asked Questions

What is the Burette Clamp - Single made of?
The Burette Clamp - Single is made of polypropylene and is fitted with rubber grips. A polypropylene body is light and does not rust when solutions drip onto it, which is useful on titration benches.

What rod size does the Burette Clamp - Single fit?
The Burette Clamp - Single is listed for rods with a diameter of 10 to 14 mm. Check the rods on your retort stands before ordering, and contact us if your stands use a different rod size.

Can the single clamp hold two burettes?
Our product note for the Burette Clamp - Single mentions holding one or two burettes, but its name indicates the single version. If you need two burettes side by side, compare it with the Burette Clamp - Double and confirm with us before ordering.

How do I stop the burette slipping in the Burette Clamp - Single?
The Burette Clamp - Single has rubber grips to prevent slipping. Tighten the clamp until the burette is held firmly and vertical, and keep the grips clean and dry so they continue to hold the glass well.

Who manufactures the Burette Clamp - Single?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Burette Clamp - Single as the OEM at its own licensed factory in Saha, Ambala, India. Schools, colleges, dealers and importers receive quotations directly from the manufacturer.

Can I get a calibration certificate or test report with the Burette Clamp - Single?
The Burette Clamp - Single is a holding clamp rather than a measuring instrument, so it is not calibrated. If your tender asks for any document with the clamps, raise it through the contact page and we will tell you what can be provided.

Request a Quote

Send your required quantity of the Burette Clamp - Single through the contact page or the enquiry cart. The manufacturer will reply with a quotation for India or export delivery.

Last updated: 24 September 2026

Universal Tube Rack (Product Code: SLE/P/28) is an adjustable polypropylene rack used to hold laboratory tubes of different sizes upright in biology, chemistry and clinical teaching labs. It holds up to 12 tubes of one size, anywhere from 16 to 30 mm in diameter, and each opening closes around the tube with an iris turned by a knob. The rack is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Universal Tube Rack Used For?

Most racks have fixed holes, so a lab needs a different rack for each tube size. This universal rack adapts instead: the iris in each opening closes around whatever tube is placed in it, from 15 mL up to 50 mL tubes. It suits labs that switch between culture tubes, sample tubes and centrifuge-style tubes during the week, and it saves bench space because one rack covers several sizes.

To load it, turn the knob to open the iris, drop the tube in and release, or simply push a tube straight into the opening. The listed capacity is up to 12 tubes when all are the same size. As a piece of school laboratory equipment it is also handy for teachers who prepare sample sets in different tube sizes for group work.

What to Specify When Ordering

• The diameter and volume of the tubes you will use (the rack takes 16 to 30 mm and 15 mL to 50 mL tubes).
• The number of racks needed per bench or per lab.
• Whether you also need tubes quoted, since tubes are not included with the rack.

OEM Manufacturer

The Universal Tube Rack comes from Jain Scientific Equipments Private Limited, known by its trading name ScienceLab, which is the original equipment manufacturer. Production takes place at the company’s own licensed factory at Saha, Ambala, Haryana, and racks are sent factory-direct to institutions, laboratories, dealers and importers. Because you deal with the maker, questions about the iris mechanism or repeat orders go straight to the people who produce it. Visit the company profile for background on ScienceLab.

Related Scientific Lab Plasticware

Other ways to hold, handle and clean tubes in the lab:

• Test Tube Rack — a fixed-hole rack for routine test tube work.
• Test Tube Rack, Polypropylene — a plastic rack for storing rows of tubes.
• Polyprop Test Tube Basket — for rinsing and carrying tubes to the sink.
• Test Tube Holder — for gripping a tube while heating or pouring.
• Brush Test Tube — cleans the inside of tubes after use.

Explore the Scientific Lab Plasticware category for more.

Frequently Asked Questions

What tube sizes fit the Universal Tube Rack?
The Universal Tube Rack accepts tubes from 16 to 30 mm in diameter and from 15 mL to 50 mL in volume. The iris in each opening adjusts to the tube, so one rack can serve several tube sizes.

How many tubes does the Universal Tube Rack hold?
The Universal Tube Rack holds up to 12 tubes of the same size. If you plan to mix tube sizes in one rack, ask us through the contact page how many will fit before you order.

Are test tubes included with the Universal Tube Rack?
No. Test tubes are not included with the Universal Tube Rack. Order tubes separately, or tell us the tube type you need through the contact page so it can be quoted alongside the racks.

How does the iris in the Universal Tube Rack work?
Each opening of the Universal Tube Rack has an iris that you open with a turn of the knob. Place the tube, then let the iris close around it, or push the tube directly into the opening without turning the knob.

Who manufactures the Universal Tube Rack?
The Universal Tube Rack is an OEM product of Jain Scientific Equipments Pvt Ltd (ScienceLab), made at the company’s own factory in Saha, Ambala, India. Questions about the iris openings, bulk supply or repeat orders go straight to the manufacturer.

What information is needed for a Universal Tube Rack quotation?
For a Universal Tube Rack quotation, send the number of racks, the tube sizes you plan to use and the delivery location in India or abroad. Add the item to the enquiry cart or write to us through the contact page.

Request a Quote

Request pricing for the Universal Tube Rack through the contact page or by adding it to the enquiry cart. Quotations are issued directly by the manufacturer.

Last updated: 24 September 2026

Container with sc cap (Product Code: SLE/P/29) is a 250 mL wide-neck polypropylene container with a screw cap (sc cap), used to store samples, powders and similar materials in laboratories. The polypropylene body gives good chemical resistance, and the liner-less screw cap closes directly on the neck without a separate seal insert. It is produced by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Screw Cap Container Used For?

A wide neck makes this container easy to fill with a spatula or scoop, which is why it is popular for dry powders, granules and solid samples. In school and college labs it is a practical way to keep class quantities of a salt or soil sample ready for practicals, and in field work it carries samples back to the lab with the cap screwed down.

Label every container with the contents and date, keep powders dry, and close the cap fully after each use. Polypropylene’s good chemical resistance suits many common laboratory substances, but check compatibility before storing strong solvents. For labs buying lab plastic ware in quantity, a standard 250 mL size keeps shelf storage uniform.

OEM Manufacturer

ScienceLab is the brand of Jain Scientific Equipments Private Limited, the original equipment manufacturer of the Container with sc cap. The container is made at the company’s own licensed factory at Saha, Ambala, Haryana, and is supplied factory-direct to schools, colleges, laboratories and trade buyers. The company is incorporated as Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), and its production site at 449, HSIIDC Industrial Area, Saha, Ambala holds Factory Licence AMB-ONLINE-CHD-J-414. Read more on the ScienceLab profile page.

Related Scientific Lab Plasticware

Other containers and tools for sample storage and transfer:

• Universal Bottle PP Cap — a smaller 30 ml bottle for individual samples.
• Specimen Container, PP — an alternative polypropylene specimen container.
• Specimen Container, Metal Cap — a container with a metal closure.
• Spatula, Polypropylene — for transferring powders into the wide neck.

See all items in Scientific Lab Plasticware.

Frequently Asked Questions

What does “sc cap” mean in Container with sc cap?
In the name Container with sc cap, “sc” stands for screw cap. The 250 mL polypropylene container closes with a liner-less screw cap that threads directly onto its wide neck.

What is the capacity of the Container with sc cap?
The Container with sc cap has a capacity of 250 mL. It is a wide-neck container, so powders and solid samples can be added and removed easily with a spatula or scoop.

What can be stored in the Container with sc cap?
The Container with sc cap is intended for storing samples, powders and similar materials. Its polypropylene body offers good chemical resistance; check compatibility with us through the contact page before storing aggressive solvents.

Does the Container with sc cap have a cap liner?
No. The Container with sc cap uses a liner-less screw cap, so there is no separate liner inside the cap. The cap closes directly on the container neck, which keeps cleaning simple.

Who manufactures the Container with sc cap?
The Container with sc cap is made by ScienceLab, the trading name of Jain Scientific Equipments Pvt Ltd, which is the OEM and runs its own licensed factory at Saha, Ambala, Haryana. Bulk and repeat orders are quoted by the manufacturer.

Can the Container with sc cap be ordered in bulk?
Yes. The Container with sc cap can be ordered in quantity by laboratories, institutions, dealers and importers in India and international markets. Send the quantity and delivery details through the enquiry cart or contact page.

Request a Quote

For a price on the Container with sc cap, use the contact page or add it to the enquiry cart with your quantity. The quotation is prepared directly by the manufacturer.

Last updated: 24 September 2026

Universal Bottle PP Cap (Product Code: SLE/P/30) is a 30 ml universal bottle closed with a polypropylene (PP) cap, used to collect, hold and label small samples in biology, chemistry and microbiology teaching laboratories. Its compact 30 ml volume suits individual student samples, reagent portions and specimens that need a screw closure. The bottle is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Universal Bottle Used For?

“Universal” bottles earn their name because one small screw-capped bottle can do many jobs: holding a water sample from a pond survey, a portion of a stock solution for one practical group, a soil extract, or a specimen being passed from one bench to another. At 30 ml, it is large enough to label clearly yet small enough that a whole class set fits in one tray.

Write the contents, date and group name on each bottle before filling, leave a little headspace, and screw the PP cap down firmly before carrying it. Microbiology lab equipment in India often includes universal bottles for culture media and water testing practicals; ask us if you need to confirm the bottle body material for your procedure.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM behind the Universal Bottle PP Cap. The bottles are produced at the company’s own licensed factory at Saha, Ambala, Haryana, and supplied factory-direct to schools, colleges, dealers and importers. Dealers restocking bottles for their own customers can place repeat orders straight with the manufacturer. For more about the company, see the ScienceLab company profile.

Related Scientific Lab Plasticware

Other containers used for sample and specimen work:

• Specimen Container, Universal 30ml — a universal specimen container listed separately.
• Container with sc cap — a larger wide-neck container for powders and samples.
• Specimen Container, PP — another polypropylene specimen option.
• Bottle McCARTNEY, BIJOU — small screw-capped bottles for culture work.

Browse the Scientific Lab Plasticware range for more.

Frequently Asked Questions

What is the volume of the Universal Bottle PP Cap?
The Universal Bottle PP Cap has a volume of 30 ml. This small size suits individual samples, class portions of solutions and specimens that need to be labelled and carried between benches.

What is the cap of the Universal Bottle PP Cap made of?
The Universal Bottle PP Cap is closed with a PP cap, meaning a cap made of polypropylene. The listing does not state the bottle body material, so ask us through the contact page if your procedure depends on it.

What is a universal bottle used for in the lab?
A universal bottle such as the Universal Bottle PP Cap is a general-purpose screw-capped bottle for collecting and storing small samples, for example water, soil extracts or portions of a solution, in teaching and routine laboratories.

Is the Universal Bottle PP Cap sterile?
Sterility is not stated for the Universal Bottle PP Cap. If your work needs sterile bottles, for example for microbiology, tell us your requirement through the contact page before ordering so we can confirm what can be supplied.

Who manufactures the Universal Bottle PP Cap?
ScienceLab (Jain Scientific Equipments Pvt Ltd) is the OEM of the Universal Bottle PP Cap and produces it at its own licensed factory in Saha, Ambala, India. Laboratories and dealers restocking bottles deal with the manufacturer directly.

What should I include in a quotation request for the Universal Bottle PP Cap?
For the Universal Bottle PP Cap, state the number of bottles, any requirement about body material or sterility, and the delivery location in India or abroad. Send it through the enquiry cart or the contact page.

Request a Quote

Ask for a quotation on the Universal Bottle PP Cap through the contact page or the enquiry cart. The manufacturer will respond with pricing for your quantity.

Last updated: 24 September 2026

Aspirator with stopcock (Product Code: SLE/P/31) is a laboratory storage vessel fitted with a stopcock outlet, used to hold and dispense distilled water or prepared solutions in school, college and industrial laboratories. It has a carrying handle, is built strong and durable for extended use, and can be used in ambient temperatures below 0°C. The aspirator is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Aspirator Bottle Used For?

An aspirator stores a working volume of liquid and releases it through its stopcock, so users can fill wash bottles, beakers or flasks without lifting and tipping a heavy container. Laboratories typically keep one filled with distilled or deionised water on a shelf above the bench, or use it as a reservoir for a stock solution that several groups draw from during a practical.

Place the aspirator on a firm raised surface so a vessel fits under the stopcock, fill it through the cap opening, and close the stopcock fully before lifting it by the carrying handle. Because it can be used in ambient temperatures below 0°C, it also suits cold rooms and unheated stores in winter. An aspirator is a useful part of any new school lab setup in India, keeping distilled water within reach of the benches.

What to Specify When Ordering

• Which capacity option you need: 10, 20 or 30 (we will confirm the unit with your quotation).
• How many aspirators of each capacity.
• The liquid you plan to store, so we can confirm suitability.

OEM Manufacturer

The Aspirator with stopcock is an OEM product of Jain Scientific Equipments Private Limited, which trades as ScienceLab. It is made at the company’s own licensed factory at Saha, Ambala, Haryana, so capacity questions and quotations are answered by the maker itself rather than a middleman. Institutions, dealers and importers order it factory-direct. Find out more about the company on the ScienceLab profile page.

Related Scientific Lab Plasticware

Other storage and dispensing vessels for laboratory liquids:

• Aspirator Polythene — a polythene aspirator alternative.
• Aspirator Bottles Borosilicate — glass aspirators for solutions that need glass.
• Polypropylene Carboys — large containers for bulk liquid storage.
• Stopcock — a separate stopcock for lab assemblies.
• Widemouthed Wash Bottles — bench bottles filled from the aspirator.

See more in Scientific Lab Plasticware.

Frequently Asked Questions

What capacities is the Aspirator with stopcock available in?
The Aspirator with stopcock is listed in capacities of 10, 20 and 30, but the unit is not stated in our listing. Please confirm the capacity you need through the contact page and we will state it clearly on the quotation.

Can the Aspirator with stopcock be used in cold conditions?
Yes. The Aspirator with stopcock can be used in ambient temperatures below 0°C, so it can stay in cold rooms or unheated stores. Close the stopcock before moving it and avoid knocking the outlet.

How is the Aspirator with stopcock carried and closed?
The Aspirator with stopcock has a carrying handle for moving it and a cap with holes to seal. Close the stopcock fully and fit the cap before carrying a filled aspirator from the store to the bench.

What liquids can be stored in the Aspirator with stopcock?
The Aspirator with stopcock is commonly used for distilled water and prepared laboratory solutions. The body material is not stated in the listing, so tell us the liquid you plan to store and we will confirm suitability before you order.

Who manufactures the Aspirator with stopcock?
The Aspirator with stopcock is manufactured in India by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at the company’s own factory in Saha, Ambala, Haryana. Capacity and suitability questions are answered by the manufacturer itself.

Is the Aspirator with stopcock available for export orders?
Yes. The Aspirator with stopcock is supplied to laboratories, dealers and importers in India and international markets. Send the capacity, quantity and destination through the enquiry cart or contact page for a quotation.

Request a Quote

To price the Aspirator with stopcock, send your capacity and quantity through the contact page or add it to the enquiry cart. The manufacturer quotes you directly.

Last updated: 24 September 2026

Polypropylene Conical Flask with Screw Cap (Product Code: SLE/P/32) is a wide-neck Erlenmeyer flask made of polypropylene with a PP screw cap, used to mix, store and carry solutions in school, college and research laboratories. It is offered in five capacities from 50 mL to 1000 mL, giving a lightweight plastic alternative to glass conical flasks for routine work. The flask is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Polypropylene Conical Flask Used For?

The conical shape lets you swirl a solution vigorously without splashing, which is why Erlenmeyer flasks are standard for titrations, dissolving solids and mixing reagents. This version adds a screw cap, so the same flask can also store a prepared solution or carry it to another room with the cap closed. A wide neck makes filling, cleaning and adding solids easier than with a narrow-neck flask.

Polypropylene flasks are a sensible choice for younger students and field work, where dropped glassware is a real risk. Keep them away from open flames and hot plates set at high temperatures, and use glass flasks when strong heating is needed. When buying conical flasks for school practicals in India, it helps to keep a plastic set for handling and storage and a glass set for heating.

What to Specify When Ordering

• The capacity or capacities you need: 50, 100, 250, 500 or 1000 mL.
• The quantity of each capacity per lab or per student group.
• Whether you also want the glass Conical Flask with Screw Cap quoted for heating work.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM of the Polypropylene Conical Flask with Screw Cap. All five capacities come from the company’s own licensed factory at Saha, Ambala, Haryana, which means a mixed order of different sizes can be quoted in one go by the maker. Schools, colleges, dealers and importers buy direct from the manufacturer rather than through a trader. See the ScienceLab company profile for more about the company.

Related Scientific Lab Plasticware

Items used alongside conical flasks when preparing and measuring solutions:

• Conical Flask with Screw Cap — the glass version for work that involves heating.
• Beaker, Polypropylene, Set of 4 — plastic beakers for mixing and pouring.
• Measuring Cylinder Set of 5 — for measuring volumes before transfer to the flask.
• Polythene Filter Funnels — for filtering into the flask neck.
• Container with sc cap — wide-neck storage for powders and samples.

Find more in Scientific Lab Plasticware.

Frequently Asked Questions

What capacities does the Polypropylene Conical Flask with Screw Cap come in?
The Polypropylene Conical Flask with Screw Cap comes in 50 mL, 100 mL, 250 mL, 500 mL and 1000 mL capacities. Each capacity is an Erlenmeyer flask with a wide neck and a PP screw cap.

What is the screw cap of the Polypropylene Conical Flask made of?
The Polypropylene Conical Flask with Screw Cap is closed with a wide screw cap made of PP (polypropylene), the same material as the flask body, so flask and cap can be washed together.

Can the Polypropylene Conical Flask with Screw Cap be heated?
The Polypropylene Conical Flask with Screw Cap is a plastic flask, so do not heat it over a flame or on a very hot plate. For experiments that need strong heating, use the glass Conical Flask with Screw Cap; ask us if you need guidance for your procedure.

Why choose a polypropylene conical flask instead of glass?
A Polypropylene Conical Flask with Screw Cap is lighter than glass and far less likely to shatter if dropped, which suits junior classes, field trips and storage of solutions. Glass remains the better choice for heating and some organic solvents.

Who manufactures the Polypropylene Conical Flask with Screw Cap?
All five capacities of the Polypropylene Conical Flask with Screw Cap are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, India, so a mixed-size order is quoted by one manufacturer.

What details should a quotation request for the Polypropylene Conical Flask include?
For the Polypropylene Conical Flask with Screw Cap, list each capacity you need with its quantity and the delivery location in India or abroad. Send the list through the enquiry cart or the contact page.

Request a Quote

Request a price for the Polypropylene Conical Flask with Screw Cap in one or more capacities through the contact page or the enquiry cart. The manufacturer prepares the quotation directly.

Last updated: 24 September 2026

Beaker, Polypropylene, Set of 4 (Product Code: SLE/P/33) is a set of four clear polypropylene beakers in 25, 50, 100 and 250 ml sizes, used to hold, mix, pour and roughly measure liquids in school and college laboratories. The beakers have raised graduations on the outer surface, a tapered easy-pour spout, very good chemical resistance, and are autoclavable up to 130°C. The set is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Are Polypropylene Beakers Used For?

Beakers are the everyday containers of the lab: students use them to dissolve solids, collect filtrate and pour measured portions into other vessels. Having four sizes in one set means the right beaker is always at hand, from 25 ml for small reagent portions to 250 ml for mixing a class solution. Because the graduations are raised rather than printed, there is no ink scale to rub off with washing.

Beaker graduations are approximate, so use a measuring cylinder or pipette when an accurate volume matters. The clear body lets students watch colour changes and dissolving, and the tapered spout gives a clean pour with fewer drips. As a beaker set for school labs in India, a polypropylene set is a practical option for junior classes because plastic does not shatter like glass, and it can be autoclaved at up to 130°C when used in biology or microbiology work.

What to Specify When Ordering

• The number of sets (each set contains one beaker each of 25, 50, 100 and 250 ml).
• Whether you also need individual polypropylene beakers in other sizes.
• Any companion items, such as measuring cylinders or stirring rods, for the same quotation.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the original equipment manufacturer of the Beaker, Polypropylene, Set of 4. The beakers are made at the company’s own licensed factory at Saha, Ambala, Haryana, and the sets reach schools, colleges, dealers and importers factory-direct. If a beaker from a set is lost or damaged, ask us about a replacement; the request goes to the manufacturer, not a reseller. Read more on the company profile page.

Related Scientific Lab Plasticware

Items that complement a polypropylene beaker set:

• Beaker, Polypropylene — individual polypropylene beakers.
• Glass Beaker Set of 5 — glass beakers for work that needs direct heating.
• Measuring Cylinder Set of 5 — for accurate volume measurement.
• Stirring Rod, Polypropylene — for mixing solutions in the beakers.
• Measuring Jug, Polypropylene — larger graduated jugs for bulk volumes.

Browse the Scientific Lab Plasticware category.

Frequently Asked Questions

Which sizes are in the Beaker, Polypropylene, Set of 4?
The Beaker, Polypropylene, Set of 4 contains four clear polypropylene beakers of 25 ml, 50 ml, 100 ml and 250 ml. Each beaker has raised outer graduations and a tapered easy-pour spout.

Can the polypropylene beakers be autoclaved?
Yes. The beakers in the Beaker, Polypropylene, Set of 4 are autoclavable up to 130°C. Do not place them over a flame or on a very hot plate; use glass beakers when direct heating is required.

How chemically resistant is the Beaker, Polypropylene, Set of 4?
The Beaker, Polypropylene, Set of 4 has very good chemical resistance for common school and college reagents. For unusual solvents or concentrated chemicals, check compatibility with us through the contact page before use.

Are the graduations on the beakers accurate?
The raised graduations on the Beaker, Polypropylene, Set of 4 give an approximate volume, as on any beaker. For accurate measurement, transfer the liquid with a measuring cylinder or pipette.

Who manufactures the Beaker, Polypropylene, Set of 4?
The Beaker, Polypropylene, Set of 4 comes from Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes the beakers at its own factory in Saha, Ambala, Haryana, India. Schools and dealers order the sets straight from the maker.

Can schools order beaker sets in bulk?
Yes. The Beaker, Polypropylene, Set of 4 can be ordered in quantity by schools, colleges, dealers and importers in India and international markets. Send the number of sets and delivery location through the enquiry cart for a quotation.

Request a Quote

To buy the Beaker, Polypropylene, Set of 4, send the number of sets through the contact page or add it to the enquiry cart. You will receive a quotation direct from the manufacturer.

Last updated: 24 September 2026

Dropper Bottle Tray (Product Code: SLE/P/34) is a white plastic tray with a removable divider used to store and carry dropper bottles of indicators, stains and reagents on laboratory benches. It holds 10 dropper bottles of 30 ml each, measures 208 x 85 x 35 mm, and is chemical resistant, so small spills are easy to wipe away. The tray is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Dropper Bottle Tray Used For?

In a practical class each group often needs the same set of indicators or test reagents, such as litmus, phenolphthalein or iodine solution. A dropper bottle tray turns those bottles into a portable kit: the teacher fills one tray per group, hands it out at the start of the lesson and collects it complete at the end. The divider keeps bottles upright and separated, which reduces knocks and mix-ups.

The white base makes labels and any drips easy to see, and because the tray is chemical resistant it can be wiped clean after a spill. Lift the divider out when you need to wash the tray thoroughly. For schools organising chemistry lab equipment for group work in India, a set of trays with matching 30 ml dropper bottles keeps reagent sets tidy from one class to the next.

What to Specify When Ordering

• The number of trays, usually one per student group or bench.
• Whether you need 30 ml dropper bottles quoted as well (the tray is sized for 10 of them).
• Clear or amber dropper bottles, if bottles are to be included.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM of the Dropper Bottle Tray. It is made at the company’s own licensed factory at Saha, Ambala, Haryana, and supplied direct to schools, colleges, institutions, dealers and importers. Trays and dropper bottles can be quoted together, so complete group sets can be ordered in one enquiry. Learn about the company on the ScienceLab profile page.

Related Scientific Lab Plasticware

Bottles and accessories that go with the tray:

• Dropper Bottle, Clear — for reagents that are not light-sensitive.
• Dropper Bottle, Amber — for light-sensitive solutions.
• Dropping Bottle — a plastic dropping bottle from the same range.
• Bottle Stand — bench storage for reagent bottles.

See the full Scientific Lab Plasticware range.

Frequently Asked Questions

How many bottles does the Dropper Bottle Tray hold?
The Dropper Bottle Tray holds 10 dropper bottles of 30 ml each. Check that your bottles are the 30 ml size so that they sit correctly in the divider before ordering trays for existing stock.

What are the dimensions of the Dropper Bottle Tray?
The Dropper Bottle Tray measures 208 x 85 x 35 mm (length x width x depth). This compact footprint lets one tray sit on a student bench beside the experiment without taking much space.

Is the divider in the Dropper Bottle Tray removable?
Yes. The Dropper Bottle Tray has a removable divider. Lift it out to wash the tray and the divider separately, then refit it to keep the bottles upright and apart during use.

Are dropper bottles included with the Dropper Bottle Tray?
This listing describes the Dropper Bottle Tray itself; dropper bottles are listed separately on our site. Tell us through the contact page if you want trays and 30 ml bottles quoted together.

Who manufactures the Dropper Bottle Tray?
The Dropper Bottle Tray is an OEM item made by Jain Scientific Equipments Pvt Ltd (ScienceLab) at its own licensed factory in Saha, Ambala, India. Trays can be quoted together with matching dropper bottles in the same reply.

Can the Dropper Bottle Tray be cleaned after chemical spills?
Yes. The Dropper Bottle Tray is made of chemical-resistant white plastic, so spills can be wiped or washed off. Rinse it with water after spills of strong acids or alkalis and let it dry before reloading the bottles.

Request a Quote

For pricing on the Dropper Bottle Tray, with or without bottles, use the contact page or add it to the enquiry cart. The manufacturer will send your quotation.

Last updated: 24 September 2026

Inoculation Cell Spreader (Product Code: SLE/P/35) is an L-shaped ABS plastic spreader used to distribute bacterial cultures evenly over the surface of agar plates in microbiology laboratories. Made from high-impact ABS, it removes the need for flaming or autoclaving, measures 156 mm x 38 mm and is packed in bags of 20. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, to college, research and teaching labs.

Specifications

What Is the Cell Spreader Used For?

The spread-plate technique places a small volume of diluted culture on the centre of an agar plate and spreads it into a thin, even film so that separate colonies grow and can be counted or picked. The L-shaped spreader does this job: its flat foot rests on the agar while the plate is turned, and the design allows the entire surface of the petri dish to be reached with ease.

Pipette the inoculum onto the plate, lay the foot of the spreader gently on the agar, and rotate the dish while moving the spreader back and forth until the liquid is absorbed. Because the spreader does not need flaming, students avoid the fire risk of dipping glass spreaders in alcohol and passing them through a burner. It is a routine consumable for microbiology lab equipment in India, from college practicals to research labs.

What to Specify When Ordering

• The number of bags required (each bag contains 20 spreaders).
• Whether inoculation loops or petri dishes should be quoted with the spreaders.
• Any sterility or packaging requirement your procedure specifies, so we can confirm it.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, supplies the Inoculation Cell Spreader together with other microbiology consumables, so a lab can source spreaders, loops and related plasticware in one quotation. Institutional buyers registering us as a vendor can use Importer-Exporter Code AAECJ8618A (DGFT) and GSTIN 06AAECJ8618A1ZT. Company background is on the ScienceLab profile page.

Related Scientific Lab Plasticware

Items used with the cell spreader in plating work:

• Inoculation Loops — for streaking and transferring small amounts of culture.
• Petri Dish, Triple Vent — plates to be spread with culture.
• Petri Dish Rack — holds plates after spreading and during incubation.
• Micropipette — places a measured inoculum volume on the agar.

More consumables and plasticware are in Scientific Lab Plasticware.

Frequently Asked Questions

Which material is the Inoculation Cell Spreader made from?
The Inoculation Cell Spreader is made of high-impact ABS plastic. According to the product details, this construction removes the need for flaming or autoclaving the spreader before use.

How many spreaders are in a pack of the Inoculation Cell Spreader?
The Inoculation Cell Spreader is packed in bags of 20. Order the number of bags that matches the plates your class or lab spreads in a typical week of practical work.

What size is the Inoculation Cell Spreader?
The Inoculation Cell Spreader measures 156 mm x 38 mm and is L-shaped. It is designed to reach the entire surface of a petri dish or plate when spreading bacterial cultures.

Is the Inoculation Cell Spreader sterile?
Our listing for the Inoculation Cell Spreader states that it needs no flaming or autoclaving but does not state a sterility method. If your protocol requires sterile packaging details, ask us through the contact page before ordering.

Who supplies the Inoculation Cell Spreader?
The Inoculation Cell Spreader is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to colleges, research labs, dealers and importers in India and international markets.

What does a quotation for the Inoculation Cell Spreader need?
For an Inoculation Cell Spreader quotation, give the number of bags of 20, any related items such as loops or petri dishes, and your delivery location. Send the request through the enquiry cart or contact page.

Request a Quote

Request a price for the Inoculation Cell Spreader through the contact page or by adding it to the enquiry cart with the number of bags you need.

Last updated: 24 September 2026

Inoculation Loops (Product Code: SLE/P/36) are 10 µl sterile plastic inoculating loops used to pick up and transfer a small inoculum without damaging the agar surface in microbiology labs. Each loop is 200 mm long, made of ABS, sterilised by ethylene oxide (EO), colour coded by size and packed 1000 to a pack for routine plating in teaching and research laboratories. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Are Inoculation Loops Used For?

An inoculation loop picks up a small, fairly consistent amount of culture from a colony, broth or sample and transfers it to fresh medium. Students use it for streak plating to obtain isolated colonies, for sub-culturing into broth tubes and for inoculating slants. A 10 µl loop is sized to hold about that volume of liquid, which is helpful when a consistent amount of sample needs to go onto a plate.

Because these loops are supplied sterile by ethylene oxide, they are ready to use from the pack with no flaming step, which removes the burner and spatter hazards of wire loops. Touch the loop lightly to the agar and draw it across the surface so the medium is not cut. Colour coding helps staff pick the right loop quickly. When planning an inoculation loop order for a lab in India, count one loop per transfer and allow for spares.

What to Specify When Ordering

• The number of packs of 1000 loops required.
• The loop volume (this listing is the 10 µl size); ask us about other colour-coded sizes.
• Related items such as cell spreaders or petri dishes to include in the same quotation.

Supplier

ScienceLab, the trading name of Jain Scientific Equipments Private Limited in Ambala, Haryana, supplies these Inoculation Loops as part of its microbiology consumables range. Labs that already buy plasticware or teaching apparatus from us can add loops to the same enquiry and receive one consolidated quotation for India or international delivery. Read about the company on the ScienceLab company profile.

Related Scientific Lab Plasticware

Other items for culture transfer and plating:

• Inoculation Cell Spreader — for spreading culture evenly across a plate.
• Petri Dish, Triple Vent — plates for streaking with the loops.
• Petri Dish Rack — stores streaked plates during incubation.
• Test Tube Rack — holds broth tubes during sub-culturing.

Browse Scientific Lab Plasticware for more.

Frequently Asked Questions

What volume do the Inoculation Loops hold?
These Inoculation Loops are the 10 µl size. A 10 µl loop picks up a small, consistent volume of liquid culture or sample, which suits streak plates and transfers where a known amount is useful.

Are the Inoculation Loops sterile?
Yes. The Inoculation Loops are listed as sterile, with sterilisation by EO (ethylene oxide). They can be used straight from the pack without flaming; discard each loop after use according to your lab’s biological waste procedure.

How many Inoculation Loops are in a pack?
The Inoculation Loops come in a pack of 1000. Sterile plastic loops are normally used once and discarded, so estimate your need from the number of transfers per practical and the number of students.

What are the Inoculation Loops made of and how long are they?
The Inoculation Loops are made of ABS (acrylonitrile butadiene styrene) and are 200 mm long. The length keeps the user’s hand well away from the plate or tube opening during transfers.

Who supplies the Inoculation Loops?
The Inoculation Loops are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to colleges, universities, research institutes, dealers and importers in India and international markets.

Why are the Inoculation Loops colour coded?
Each size of these Inoculation Loops is colour coded for quick and easy identification. This helps staff and students pick the correct loop size at a glance; confirm the colour of the 10 µl loop with us through the contact page.

Request a Quote

To order Inoculation Loops, send the number of packs through the contact page or add them to the enquiry cart.

Last updated: 24 September 2026

Endraflex Tubing Clamp Collar (Product Code: SLE/P/37) is a clamp collar used to seal off Enduraflex tubing evenly when the tube is clamped in laboratory set-ups. Enduraflex tubing is square, so a clamp pressed straight onto it does not close it properly; the purpose-built collar gives the clamp a circular surface so the pressure is shared equally. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for teaching and research labs.

Key Details

What Is the Tubing Clamp Collar Used For?

Flexible tubing in a lab set-up is often closed with a screw clip or pinch clip to stop or control the flow of water, gas or solution. Round tubing flattens neatly under a clip, but square-section tubing such as Enduraflex tends to leave gaps at the corners, so liquid or gas can still leak past. Fitting this collar around the tubing gives the clip a round surface to press on, so the tube closes evenly.

Fit the collar on the tubing where you want to shut it off, position the clamp over the collar and tighten gradually until the flow stops. Check the joint for drips before leaving the apparatus unattended. The collar is a small accessory, but for labs that use Enduraflex tubing it lets a standard clip close the tube as intended in set-ups such as gas collection or water supply lines.

Supplier

The Endraflex Tubing Clamp Collar is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. We source this accessory for customers who already use Enduraflex tubing, and it can be quoted together with clips, tubing and other lab plastic ware so that a laboratory receives one consolidated order. See the ScienceLab profile for more about the company.

Related Scientific Lab Plasticware

Clips and tubing used in the same set-ups:

• Hoffman Screw Clip — an adjustable screw clip for controlling flow through tubing.
• Pinch Clip — a quick spring clip for closing flexible tubing.
• Rubber Tubing — round flexible tubing for general lab connections.
• Burner Tubing — flexible tubing for gas burner connections.

Other plasticware is listed under Scientific Lab Plasticware.

Frequently Asked Questions

What does the Endraflex Tubing Clamp Collar do?
The Endraflex Tubing Clamp Collar gives a clamp a circular surface to press on when closing Enduraflex tubing. Because the tubing is square, clamping it directly does not seal it properly; the collar spreads the pressure equally so the tube closes.

Which tubing is the Endraflex Tubing Clamp Collar for?
The Endraflex Tubing Clamp Collar is purpose-built for Enduraflex tubing. Round rubber or plastic tubing can normally be closed with an ordinary screw clip or pinch clip without a collar.

Is a clamp included with the Endraflex Tubing Clamp Collar?
The listing for the Endraflex Tubing Clamp Collar describes the collar itself and does not state that a clamp is included. Ask us through the contact page if you want a suitable clip quoted with it.

What size of Enduraflex tubing does the collar fit?
The tubing size for the Endraflex Tubing Clamp Collar is not stated in our listing. Tell us the size of the Enduraflex tubing you use through the contact page and we will confirm fit before you order.

Who supplies the Endraflex Tubing Clamp Collar?
The Endraflex Tubing Clamp Collar is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, colleges, laboratories, dealers and importers in India and international markets.

What should I send to get a quotation for the Endraflex Tubing Clamp Collar?
For the Endraflex Tubing Clamp Collar, send the quantity, the size of your Enduraflex tubing and your delivery location. Use the enquiry cart or the contact page, and add any clips or tubing you need.

Request a Quote

Ask for pricing on the Endraflex Tubing Clamp Collar through the contact page or add it to the enquiry cart with the tubing size you use.

Last updated: 24 September 2026

Measuring Cylinder Set of 5 (Product Code: SLE/P/38) is a set of five clear polypropylene graduated cylinders, 10, 25, 50, 100 and 250 ml, used to measure liquid volumes in school and college practical work. Raised graduations on the outer surface, an easy-pour tapered spout, good chemical resistance and autoclaving up to 130°C make the set practical for chemistry and biology benches alike. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Ambala, India.

Specifications

What Is a Measuring Cylinder Set Used For?

Measuring cylinders are the standard way for students to measure out a volume of water or solution before a reaction, a dilution or a density experiment. The key to good results is choosing a cylinder close to the volume needed: 8 ml is measured far more precisely in the 10 ml cylinder than in the 250 ml one. With a graded set of five, from 10 to 250 ml, students rarely need to borrow a cylinder from the next bench.

Stand the cylinder on a level bench, fill to just below the mark, then add the last few drops with a dropper and read the bottom of the meniscus at eye level. The clear polypropylene lets students see the meniscus, and the tapered spout helps pour the measured liquid out cleanly. For a measuring cylinder set in school labs in India, polypropylene has a clear advantage: a knocked-over cylinder is far less likely to break than glass.

What to Specify When Ordering

• The number of complete sets (10, 25, 50, 100 and 250 ml in each).
• Whether you need extra single cylinders of the most-used sizes.
• Whether glass cylinders are needed as well, for procedures involving hot liquids or solvents.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the original equipment manufacturer of the Measuring Cylinder Set of 5 and makes it at its own factory at Saha, Ambala, Haryana. Buyers completing vendor forms can note CIN U29309HR2020PTC087597 for the company and Factory Licence AMB-ONLINE-CHD-J-414 for its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala. Sets are dispatched factory-direct to schools, colleges, dealers and importers, and quotations come from the maker. Visit the ScienceLab profile to learn more.

Related Scientific Lab Plasticware

Other measuring and mixing ware for the same bench:

• Measuring Cylinder, Polypropylene — individual plastic cylinders.
• Glass Measuring Cylinder — glass option for hot liquids and solvents.
• Beaker, Polypropylene, Set of 4 — to receive and mix the measured liquid.
• Measuring Jug, Polypropylene — for measuring out bigger batches of solution.

Explore more in Scientific Lab Plasticware.

Frequently Asked Questions

What sizes are included in the Measuring Cylinder Set of 5?
The Measuring Cylinder Set of 5 includes polypropylene cylinders of 10 ml, 25 ml, 50 ml, 100 ml and 250 ml. All five are clear, with raised graduations and an easy-pour tapered spout.

What material is the Measuring Cylinder Set of 5 made from?
The Measuring Cylinder Set of 5 is made of clear polypropylene with good chemical resistance. Polypropylene is lighter than glass and much less likely to break when a cylinder is knocked over on the bench.

Can the Measuring Cylinder Set of 5 be autoclaved?
Yes. The cylinders in the Measuring Cylinder Set of 5 are autoclavable up to 130°C. Do not heat them over a flame; use glass cylinders where hot liquids are measured directly.

Is a calibration certificate available for the Measuring Cylinder Set of 5?
A calibration certificate is not listed for the Measuring Cylinder Set of 5. If your lab or tender needs calibration documents, discuss the requirement through the contact page before ordering and we will tell you what can be arranged.

Who manufactures the Measuring Cylinder Set of 5?
Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab, is the OEM of the Measuring Cylinder Set of 5 and makes it at its licensed factory in Saha, Ambala, Haryana, India. Sets are dispatched and quoted by the manufacturer itself.

Is the Measuring Cylinder Set of 5 available for bulk or export orders?
Yes. Schools, colleges, dealers and importers order the Measuring Cylinder Set of 5 in quantity for delivery across India and to international markets. Send the number of sets and the destination through the enquiry cart for a quotation.

Request a Quote

To order the Measuring Cylinder Set of 5, send the number of sets through the contact page or add it to the enquiry cart. Your quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Measuring Jug, Polypropylene (Product Code: SLE/P/39) is a set of three clear polypropylene measuring jugs, 250 ml, 500 ml and 1000 ml, used to measure and pour larger volumes of water and solutions when preparing reagents and class quantities in school and college laboratories. Each jug has raised outer graduations, an easy-pour tapered spout and good chemical resistance, and can be autoclaved up to 130°C. The jugs are made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Polypropylene Measuring Jug Used For?

Jugs take over where beakers and cylinders run out of room. A lab assistant making up a litre of dilute acid, a salt solution for a whole class, or water for a large water bath needs a vessel that holds the full volume and pours it without spills. With 250, 500 and 1000 ml jugs in one set, the right size is available for small additions and for full one-litre batches.

Read the raised graduations with the jug standing level and treat them as a guide rather than a precise measurement; use a measuring cylinder or volumetric flask when accuracy matters. Always add acid to water, never the reverse, and pour through the tapered spout into a funnel when filling narrow-necked bottles. Among lab plastic ware, polypropylene jugs are also handy in biology labs because they can be autoclaved at up to 130°C when preparing media.

What to Specify When Ordering

• The number of sets of three jugs (250, 500 and 1000 ml).
• Whether you need the separate Set of 4 jug listing instead.
• Any matching cylinders or beakers to be quoted with the jugs.

OEM Manufacturer

The Measuring Jug, Polypropylene set comes from Jain Scientific Equipments Private Limited, trading as ScienceLab, which is the OEM and produces the jugs at its own licensed factory in Saha, Ambala, Haryana. Laboratories, schools, dealers and importers order directly from the manufacturer, so questions about the set, spare jugs or repeat supplies are answered by the maker. The company profile page has more background.

Related Scientific Lab Plasticware

Other graduated ware for preparing solutions:

• Measuring Jug, Polypropylene, Set of 4 — the four-jug listing in the same range.
• Measuring Cylinder Set of 5 — for more accurate smaller volumes.
• Beaker, Polypropylene, Set of 4 — for mixing and dissolving.
• Polypropylene Carboys — for storing bulk solutions after preparation.
• Funnels Set, Polythene — for pouring from the jug into bottles.

The complete Scientific Lab Plasticware category lists more graduated ware.

Frequently Asked Questions

Is the Measuring Jug, Polypropylene a single jug or a set?
The Measuring Jug, Polypropylene is supplied as a set of 3 jugs with capacities of 250 ml, 500 ml and 1000 ml. A separate Set of 4 listing is also available in the same plasticware range.

Can the Measuring Jug, Polypropylene be autoclaved?
Yes. The Measuring Jug, Polypropylene can be autoclaved up to 130°C, which is useful for biology and microbiology preparation. Keep the jugs away from open flames and very hot plates.

How are the Measuring Jug, Polypropylene graduations marked?
The Measuring Jug, Polypropylene has raised graduations on the outer surface. They give a quick guide to volume while pouring; for accurate measurement, use a measuring cylinder or volumetric flask.

Which chemicals can be used in the Measuring Jug, Polypropylene?
The Measuring Jug, Polypropylene is chemical resistant with good chemical resistance for everyday lab solutions. For strong solvents or unusual reagents, check compatibility with us through the contact page before use.

Who manufactures the Measuring Jug, Polypropylene?
The Measuring Jug, Polypropylene set is produced by ScienceLab, the brand of Jain Scientific Equipments Pvt Ltd, acting as OEM at its own factory in Saha, Ambala, India. Buyers deal with the manufacturer for quotations and repeat supply.

What information is needed to quote the Measuring Jug, Polypropylene?
To quote the Measuring Jug, Polypropylene, send the number of sets, any extra items such as cylinders or beakers, and the delivery location in India or abroad through the enquiry cart or the contact page.

Request a Quote

Request a quotation for the Measuring Jug, Polypropylene through the contact page or the enquiry cart; the manufacturer will reply with pricing for your quantity.

Last updated: 24 September 2026

Measuring Jug, Polypropylene, Set of 4 (Product Code: SLE/P/40) is a set of four clear polypropylene jugs used to measure and pour liquids in school, college and research laboratories. The set runs from 250 ml through 500 ml and 1 L up to a 2 L jug, so one order covers small reagent volumes as well as bulk solution preparation. This piece of chemistry lab equipment for schools is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Polypropylene Measuring Jug Set Used For?

Lab assistants and teachers use the four jugs to measure out distilled water, make up bulk solutions, carry liquids between the preparation room and the benches, and hand out measured volumes to student groups. The raised graduations on the outer surface give a quick volume reading while you pour, and the tapered spout lets you fill a narrow flask or cylinder with less spillage.

A jug gives an approximate volume; when an experiment needs an exact amount, measure it in a cylinder or pipette and keep the jug for transfer and bulk work. As everyday school lab equipment, the clear bodies make residue easy to spot before re-use. Rinse the jugs after acids or alkalis and, where needed, autoclave them within the 130°C limit.

What to Specify When Ordering

• The number of sets required — each set holds the 250 ml, 500 ml, 1 L and 2 L jugs.
• Whether the jugs will be autoclaved, so your cycle can be kept within 130°C.
• Any other polypropylene ware to quote together, such as beakers or measuring cylinders.
• The delivery location in India or abroad.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the OEM (original equipment manufacturer) of this measuring jug set. The jugs are produced at the company's own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges, dealers and importers buy from the maker rather than through a trader. Repeat orders and replacement jugs are handled by the same manufacturing team — ask us. Read more on the ScienceLab company profile.

Related Scientific Lab Plasticware

These polypropylene items are often ordered with the jug set for measuring, mixing and holding solutions.

• Measuring Jug, Polypropylene — a smaller set in the same range, without the 2 L jug.
• Measuring Cylinder Set of 5 — for readings that need more precision than a jug gives.
• Beaker, Polypropylene, Set of 4 — for mixing and holding the solutions you measure out.
• Dispensing Jug — another pouring vessel from the plasticware range.
• Stirring Rod, Polypropylene — to mix solutions once they are measured.

Browse the full Scientific Lab Plasticware range for beakers, bottles, racks and other polypropylene ware.

Frequently Asked Questions

What sizes come in the Measuring Jug, Polypropylene, Set of 4?
The Measuring Jug, Polypropylene, Set of 4 contains four clear jugs of 250 ml, 500 ml, 1 L and 2 L capacity. Each jug has raised graduations on its outer surface and a tapered spout, so one set covers both small and large measuring jobs on the bench.

Can the polypropylene measuring jugs be autoclaved?
Yes. The jugs in the Measuring Jug, Polypropylene, Set of 4 are autoclavable up to 130°C. Keep sterilisation cycles within that temperature and allow the jugs to cool fully before they are used for measuring again.

Are the jugs suitable for acids and alkalis?
The Measuring Jug, Polypropylene, Set of 4 is made of polypropylene with good chemical resistance, which suits routine aqueous solutions and dilute acids and alkalis in teaching labs. For strong oxidising agents or organic solvents, check polypropylene compatibility first or ask us for advice.

Who manufactures the Measuring Jug, Polypropylene, Set of 4?
The Measuring Jug, Polypropylene, Set of 4 is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Buyers deal directly with the manufacturer for quotations, repeat orders and replacement jugs.

Is a calibration certificate available for these jugs?
The Measuring Jug, Polypropylene, Set of 4 is designed for routine measuring and pouring with raised graduations rather than volumetric accuracy. If your lab or tender needs a calibration certificate, discuss the requirement with us through the contact page before ordering.

Can ScienceLab supply the jug sets in bulk or for export?
Yes. The Measuring Jug, Polypropylene, Set of 4 can be ordered in bulk by schools, colleges, dealers and importers. ScienceLab supplies customers across India and international markets; share your quantity and destination to receive a quotation.

Request a Quote

To order the Measuring Jug, Polypropylene, Set of 4, send your quantity and delivery details through the contact page or add it to the enquiry cart. Quotations come direct from the manufacturer in Ambala.

Last updated: 24 September 2026

Micro Centrifuge Tube, 1.5ml (Product Code: SLE/P/41) is a small polypropylene tube with a flat cap used to hold, spin and store microlitre-scale samples in biology, biotechnology and clinical laboratories. Packed 500 to a pack, the tubes are made from robust virgin polypropylene with clear moulded graduations and a frosted writing area. These lab consumables are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is a 1.5 ml Micro Centrifuge Tube Used For?

Micro centrifuge tubes are the standard vessel for small-volume work such as DNA and protein preparations, enzyme reactions, spinning down cells or precipitates, and keeping aliquots for later use. Students pipette the sample in, close the cap, label the frosted area or the cap top and then centrifuge, mix or incubate the tube.

Balance the rotor by loading tubes of equal volume opposite each other, and check that your rotor takes 1.5 ml tubes before a run. Most labs treat these tubes as disposable lab equipment and order full packs for a term of practicals, which is why they come in packs of 500.

What to Specify When Ordering

• The number of packs — each pack contains 500 tubes of 1.5 ml.
• Whether sterile tubes are needed; the listing does not state sterility, so ask us.
• The centrifuge or rotor the tubes must fit, so compatibility can be checked.
• Matching items such as a micropipette, tips or a tube rack.

Supplier

Jain Scientific Equipments Private Limited, which trades as ScienceLab, supplies these 1.5 ml tubes as part of the plasticware it sources for teaching and research laboratories. Institutions, dealers and importers can add them to a wider laboratory order and receive one quotation from Ambala. For vendor registration, the supplying company's details are Importer-Exporter Code AAECJ8618A (DGFT) and GSTIN 06AAECJ8618A1ZT. See the ScienceLab profile for company information.

Related Laboratory Equipment

Micro centrifuge tubes are used with pipetting and spinning equipment; these items complete the workflow.

• Micro Centrifuge — a centrifuge for spinning small-volume tubes.
• Micropipette — for dispensing small sample volumes into the tubes.
• Filter Pipette Tips — disposable tips for transferring samples.
• Universal Tube Rack — a rack for holding tubes on the bench; check the hole size with us.

More tubes, bottles and racks are listed under Scientific Lab Plasticware.

Frequently Asked Questions

How many tubes are in one pack of Micro Centrifuge Tube, 1.5ml?
One pack of Micro Centrifuge Tube, 1.5ml contains 500 tubes. Each tube holds 1.5 ml and has a flat cap with a bevelled edge, clear moulded graduations and a frosted writing area, so a single pack covers many practical sessions.

Are these micro centrifuge tubes sterile?
The listing for the Micro Centrifuge Tube, 1.5ml does not state that the tubes are sterile. If your protocol needs sterile or nuclease-free tubes, say so when you enquire through the contact page so we can confirm what can be supplied before you order.

Can I write on the tubes?
Yes. The Micro Centrifuge Tube, 1.5ml has a frosted writing area on the tube body and a flat, writable surface on top of the cap, so samples can be labelled with a laboratory marker before they are centrifuged or stored.

Will the tubes fit my centrifuge?
The Micro Centrifuge Tube, 1.5ml suits centrifuge rotors and racks made for 1.5 ml tubes. Check your rotor specification, or share the centrifuge model with us before ordering, and always load the tubes in balanced pairs.

Does the cap seal well enough for storage?
The Micro Centrifuge Tube, 1.5ml is described with precise lid sealing that keeps evaporation low while samples are stored. Close each cap fully, keep the tubes upright in a rack and label them clearly on the frosted area.

Who supplies the Micro Centrifuge Tube, 1.5ml?
The Micro Centrifuge Tube, 1.5ml is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources these tubes for schools, colleges, research labs, dealers and importers, and handles enquiries and dispatch directly.

What do I need to send for a quotation?
For the Micro Centrifuge Tube, 1.5ml, send the number of 500-tube packs, the delivery location in India or abroad and any related items such as pipette tips or racks. Use the contact page or enquiry cart and ScienceLab will reply with a quotation.

Request a Quote

Request a quotation for the Micro Centrifuge Tube, 1.5ml by sending your pack quantity through the contact page, or add the tubes to the enquiry cart with the rest of your plasticware list.

Last updated: 24 September 2026

Pipette Filler – 10ml (Product Code: SLE/P/42) is a thumb-wheel pipetting device used to draw up and dispense liquids safely with pipettes in chemistry, biology and teaching laboratories. Rated at 10 ml capacity, it lets students fill precisely with the wheel or empty the pipette almost instantly with the push-in releaser, instead of pipetting by mouth. This item of school chemistry lab equipment is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is a 10 ml Pipette Filler Used For?

The filler fits on top of a graduated or bulb pipette so that liquid is drawn up by the device and never by mouth. It is used in titrations, standard-solution preparation, reagent transfer and serial dilutions in school and college practicals.

Hold the pipette near its top and push it gently into the chuck, turn the thumb wheel to draw liquid just above the mark, then roll back to set the meniscus and deliver. Keep liquid inside the pipette and out of the filler; after work with acids or alkalis, take the filler apart, rinse the parts and let them dry before reassembly.

What to Specify When Ordering

• The number of fillers needed for your benches or student groups.
• The pipette sizes you use, so the chuck fit can be checked.
• Whether a larger-capacity filler or a bulb-type filler is also needed for other pipettes.
• The delivery location in India or abroad.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies this pipette filler from Ambala, Haryana, India to schools, colleges, laboratories, dealers and importers. It can be quoted together with the larger thumb-wheel filler, bulb-type fillers and pipette stands listed below, so a laboratory's pipetting aids arrive on one order. For vendor registration, the supplying company is Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597, GSTIN 06AAECJ8618A1ZT). More background is on the ScienceLab company profile.

Related Scientific Lab Plasticware

Pipetting aids and pipette storage items that are used alongside this filler.

• Pipette Filler — a larger-capacity thumb-wheel filler in the same range.
• Bulb Type, Pipette Filler — a bulb-and-valve alternative for harmful or unpleasant solutions.
• Pipette Stand, Polypropylene — to rest pipettes safely between uses.
• Pipette Controller — another pipetting aid for labs that pipette frequently.

See all pipetting and liquid-handling items in Scientific Lab Plasticware.

Frequently Asked Questions

What pipettes does the Pipette Filler – 10ml fit?
The Pipette Filler – 10ml has a moulded chuck with a silicone rubber collar inside that grips pipettes of standard sizes, and it is rated at 10 ml capacity. Tell us which pipette sizes you use and we will confirm the fit before you order.

How do you empty the pipette quickly?
On the Pipette Filler – 10ml, push in the releaser for virtually instant emptying, or rotate the thumb wheel for slow, precise dispensing. Use the wheel when delivering to a mark and the releaser when you simply need to drain the pipette.

Can the filler be used with acids and alkalis?
Yes. The Pipette Filler – 10ml resists acids and alkalis. Keep the liquid inside the pipette and out of the filler; if any is drawn in, disassemble the filler, rinse the parts with water and let them dry before reassembly.

Who supplies the Pipette Filler – 10ml?
The Pipette Filler – 10ml is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. Schools, colleges, dealers and importers order it directly from ScienceLab and can ask the same team about replacement parts or about other fillers for different pipette sizes.

How is the filler cleaned?
The Pipette Filler – 10ml can be easily disassembled for thorough cleaning. Take it apart after use, rinse the parts, let them air-dry and reassemble, checking that the silicone collar sits correctly in the chuck so pipettes are held securely.

Is a calibration certificate supplied with the filler?
The Pipette Filler – 10ml is a pipetting aid, so delivered volume depends on the pipette fitted to it. If your institution needs a calibration certificate or other documents with the order, discuss it with us through the contact page first.

Can I order the fillers in bulk for several labs?
Yes. The Pipette Filler – 10ml can be ordered in bulk for schools, colleges and institutions across India and international markets. Send your quantity and delivery location to ScienceLab for a quotation.

Request a Quote

For a quotation on the Pipette Filler – 10ml, write to us through the contact page or add it to the enquiry cart. ScienceLab will send pricing for the filler together with any other plasticware you list.

Last updated: 24 September 2026

Pipette Stand, Polypropylene (Product Code: SLE/P/43) is a white, autoclavable stand used to hold up to 12 pipettes on the bench in chemistry, biology and microbiology laboratories. Its two ends are joined by three metal rods coated with polypropylene, forming a stable two-sided stand that resists chemicals. This school laboratory equipment is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Polypropylene Pipette Stand Used For?

A pipette stand keeps clean or in-use pipettes off the bench, where they can roll, break or pick up contamination. During titration or dilution practicals, each group rests its pipettes in the stand between steps, and a full set of 12 pipettes stays together at one station.

Because the stand is autoclavable and chemical resistant, it can go through the autoclave after microbiology sessions and cope with the splashes common on chemistry benches. Rinse and dry it regularly, and keep it back from the bench edge.

What to Specify When Ordering

• The number of stands, based on how many pipette stations you run (each stand holds 12 pipettes).
• Whether pipette fillers or other stand formats (rotary, horizontal or vertical) should be quoted too.
• The delivery location for your order.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known by its brand ScienceLab, manufactures this pipette stand as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Buying from the maker means the stand, matching plasticware and later repeat orders come from one source, with quotations prepared by the manufacturer itself. More about the company is on the ScienceLab profile page.

Related Scientific Lab Plasticware

Other pipette stands and pipetting aids to consider for the same bench.

• Pipette Stand Rotary — a rotary alternative in the same range.
• Pipette Stand, Horizontal — a horizontal-format stand.
• Pipette Stand, Vertical — a vertical-format stand.
• Pipette Filler – 10ml — to fill pipettes safely before resting them in the stand.

Find more racks, stands and polypropylene ware in Scientific Lab Plasticware.

Frequently Asked Questions

How many pipettes does the Pipette Stand, Polypropylene hold?
The Pipette Stand, Polypropylene holds 12 pipettes. It is built as a two-sided stand, with two end pieces joined by three polypropylene-coated metal rods, so the pipettes for one bench station rest together securely.

Can the pipette stand be autoclaved?
Yes, the Pipette Stand, Polypropylene is autoclavable. Microbiology labs can sterilise it after sessions, and its chemical-resistant surface also copes with routine splashes on chemistry benches. Let it cool and dry before reloading pipettes.

What is the pipette stand made of?
The Pipette Stand, Polypropylene is white polypropylene, and the three metal rods that join its two ends are coated with polypropylene. The whole stand therefore presents a chemical-resistant polypropylene surface to pipettes and splashes.

Who manufactures the Pipette Stand, Polypropylene?
The Pipette Stand, Polypropylene is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Ambala, Haryana, India. Institutions and dealers order directly from the maker, which also handles repeat and bulk orders.

Which pipettes can rest on the stand?
The Pipette Stand, Polypropylene is intended for general laboratory pipettes. If you use unusually long or wide pipettes, send their dimensions through the contact page and we will confirm whether the stand suits them before you order.

What should a quotation request include?
For the Pipette Stand, Polypropylene, mention how many stands you need, the delivery location in India or abroad and any pipette fillers or other plasticware to include. Use the contact page or enquiry cart for a manufacturer-direct quotation.

Request a Quote

Send the number of Pipette Stand, Polypropylene units you need through the contact page, or place them in the enquiry cart. ScienceLab quotes directly as the manufacturer.

Last updated: 24 September 2026

Spatula, Polypropylene (Product Code: SLE/P/44) is a blue, 150 mm double-ended plastic tool used to scoop, transfer and level solid chemicals and powders in school and college laboratories. One end is a spoon and the other a flat, knife-edged face, and the spatulas come in packs of 20 for whole-class use. This basic item of chemistry lab equipment for schools is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Polypropylene Spatula Used For?

Students use the spoon end to take powders or crystals from a reagent bottle and the flat blade to scrape, level or divide solids on a weighing boat or watch glass. A plastic spatula is handy where a metal blade could react with the sample or scratch a container.

Use a clean, dry spatula for each chemical to avoid cross-contamination, wipe it after use and wash it before it goes back in the drawer. As practical-class lab plastic ware, a pack of 20 lets several benches keep their own spatula. Avoid very hot solids, which can soften plastic.

What to Specify When Ordering

• The number of packs (20 spatulas per pack).
• Other weighing items to include, such as weighing boats or weighing paper.
• The delivery location in India or abroad.

OEM Manufacturer

ScienceLab, the brand of Jain Scientific Equipments Private Limited, is the OEM manufacturer of this polypropylene spatula and makes it at the company's own licensed factory at Saha, Ambala, Haryana, India. Schools and distributors buy direct from the factory rather than from a trading intermediary, and repeat packs for a new academic year can be arranged with the same team — ask us. See the company profile.

Related Scientific Lab Plasticware

Items used with the spatula when weighing and dissolving solids.

• Plastic Weighing Boats — to hold powders scooped out with the spatula during weighing.
• Weighing Paper — an alternative surface for weighing small amounts of solid.
• Stirring Rod, Polypropylene — to dissolve the weighed solid in a solvent.
• Beaker, Polypropylene, Set of 4 — for dissolving and mixing the weighed chemicals.

The complete Scientific Lab Plasticware range lists more polypropylene tools for the chemistry bench.

Frequently Asked Questions

How many spatulas are in a pack of Spatula, Polypropylene?
One pack of Spatula, Polypropylene contains 20 blue spatulas, each 150 mm long, with a spoon at one end and a flat, knife-edged face at the other. A single pack can equip several benches at once.

Is the polypropylene spatula chemical resistant?
Yes. The Spatula, Polypropylene is made of chemical-resistant polypropylene, which suits common school reagents such as salts and many dilute acids and bases. Clean it between chemicals, and avoid very hot solids or strong solvents that attack plastics.

What is each end of the spatula used for?
On the Spatula, Polypropylene, the spoon end scoops powders and crystals from reagent bottles, while the flat, knife-edged face levels, scrapes and divides solids on a weighing boat or watch glass, helping students measure out small amounts carefully.

Who manufactures the Spatula, Polypropylene?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Spatula, Polypropylene as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Orders and quotations are handled directly by the manufacturer for schools, colleges, dealers and importers.

Can I order the spatulas along with other plasticware?
Yes. The Spatula, Polypropylene can be quoted together with weighing boats, beakers, stirring rods and other items from the ScienceLab plasticware range. List every item and quantity through the contact page or enquiry cart to receive one combined quotation.

Do you supply the spatulas in bulk for export?
Yes. ScienceLab supplies the Spatula, Polypropylene in packs of 20 to schools, colleges and distributors across India and international markets. Share the number of packs and the destination to receive a quotation.

Request a Quote

Ask for a quotation on the Spatula, Polypropylene through the contact page or by adding the packs to the enquiry cart. The reply comes straight from the manufacturer.

Last updated: 24 September 2026

Specimen Container, PP (Product Code: SLE/P/45) is a 120 ml polypropylene container with an HDPE lid used to collect, store and transport specimens in clinical, pathology and teaching laboratories. Made from non-cytotoxic polypropylene and graduated on three sides, it has a ridged lid and base so it opens easily even when the user is wearing gloves. This lab consumable is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is a 120 ml PP Specimen Container Used For?

Laboratories use this container to receive samples, keep them closed during storage and send them on to another bench or laboratory. The graduations on three sides let staff read the approximate volume from any angle without turning the container round.

Label each container before filling, close the lid firmly and keep it upright during transport. Teaching labs also use such containers to hold collected biological or environmental samples for practical work, alongside other biology lab equipment. Follow your institution's rules for handling and disposing of clinical specimens.

What to Specify When Ordering

• The number of containers required.
• Whether this 120 ml container suits your samples, or a different type such as the Specimen Container, Universal 30ml or Specimen Container, Metal Cap.
• Whether sterile containers are needed; this listing does not state sterility, so ask us.
• The delivery location in India or abroad.

Supplier

Jain Scientific Equipments Private Limited trades as ScienceLab and supplies this specimen container together with the other laboratory plasticware it sources. Hospital laboratories, colleges, schools, dealers and importers can buy specimen containers and related items through one enquiry, with dispatch from Ambala. Learn more on the ScienceLab profile.

Related Scientific Lab Plasticware

Other sample containers that laboratories compare with this one.

• Specimen Container, Metal Cap — a 100 ml container with a lined metal cap.
• Specimen Container, Universal 30ml — a smaller screw-cap container listed as sterile.
• Container Sample 50 ml — a 50 ml sample container from the clinical laboratory range.
• Container with sc cap — a screw-cap container for storing samples and powders.

See every container and bottle in Scientific Lab Plasticware.

Frequently Asked Questions

What is the capacity of the Specimen Container, PP?
The Specimen Container, PP holds 120 ml and measures 55 mm x 80 mm. It is graduated on three sides, so the approximate sample volume can be read from any direction without turning the container round.

What materials is the container made from?
The Specimen Container, PP has a body of non-cytotoxic polypropylene and a lid of HDPE (high-density polyethylene). Both are common laboratory plastics for containers that are filled, stored and moved between benches or laboratories.

Is the container easy to open with gloves on?
Yes. The Specimen Container, PP has a ridged lid and a ridged bottom, giving a firm grip so it opens easily even when laboratory staff are wearing gloves. Hold the base while turning the lid to avoid spills.

Is the Specimen Container, PP sterile?
The description of the Specimen Container, PP does not state that it is sterile. If your application requires sterile containers, mention this when you enquire through the contact page, or consider the universal specimen container, which is listed as EO-sterilised.

Who supplies the Specimen Container, PP?
The Specimen Container, PP is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India. The company sources it for laboratories, institutions, dealers and importers and handles quotations and dispatch directly.

What should my quotation request include?
For the Specimen Container, PP, state the number of containers, whether sterile supply is required, and the delivery location in India or abroad. Send it through the contact page or add the item to the enquiry cart to receive a quotation from ScienceLab.

Request a Quote

Enquire about the Specimen Container, PP through the contact page or add it to the enquiry cart, stating the quantity you need.

Last updated: 24 September 2026

Specimen Container, Metal Cap (Product Code: SLE/P/46) is a 100 ml polystyrene container closed by a metal cap with a flowed-seal inert liner, used to collect and store samples in clinical and research laboratories. All its materials are non-cytotoxic, the lined cap is designed to give a leak-proof seal, and the container is for in vitro use only. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its range of laboratory consumables.

Specifications

What Is a Metal Cap Specimen Container Used For?

The container holds samples that must stay sealed while they are stored, with the lined metal cap guarding against leaks. Laboratories use it to receive specimens, keep reference samples and store small quantities of material for later testing or teaching.

Write the sample details on the label before filling, tighten the cap fully and store the container upright. Polystyrene is more brittle than polypropylene, so handle filled containers with care and avoid dropping them.

What to Specify When Ordering

• The number of containers.
• The label option you need: no label, plain label or printed label.
• Whether another type would suit better, such as the Specimen Container, PP or Specimen Container, Universal 30ml.
• The delivery location in India or abroad.

Supplier

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, which supplies this metal-cap specimen container from Ambala, Haryana. The company sources the containers and quotes them alongside other sample-handling plasticware, so laboratories, institutions and dealers can place one consolidated order. See the ScienceLab profile for company details.

Related Scientific Lab Plasticware

Alternative containers and bottles for collecting and storing samples.

• Specimen Container, PP — a 120 ml polypropylene container with an HDPE lid.
• Specimen Container, Universal 30ml — a smaller screw-cap container listed as EO-sterilised.
• Universal Bottle PP Cap — a universal bottle with a polypropylene cap.
• Container Sample 50 ml — a 50 ml option listed under clinical laboratory supplies.

More sample bottles and containers are in the Scientific Lab Plasticware category.

Frequently Asked Questions

What is the capacity of the Specimen Container, Metal Cap?
The Specimen Container, Metal Cap holds 100 ml. It is made from virgin polystyrene and closed with a metal cap that carries a flowed-seal inert liner, giving a leak-proof closure for collected samples.

Why does the container use a lined metal cap?
On the Specimen Container, Metal Cap, the flowed-seal inert liner inside the metal cap presses against the rim to give a leak-proof seal, and the liner sits between the sample and the metal. Tighten the cap fully after filling.

What label options are listed?
The Specimen Container, Metal Cap is listed with three label options: no label, plain label and printed label. Tell us which option you need when you enquire, and we will confirm availability for your quantity.

What does "for in vitro use only" mean here?
The Specimen Container, Metal Cap is marked for in vitro use only, meaning it is intended for holding samples outside the body, such as collected specimens kept for storage and laboratory testing. It is not meant for use on or inside a patient.

Who supplies the Specimen Container, Metal Cap?
Jain Scientific Equipments Pvt Ltd (ScienceLab), based in Ambala, Haryana, India, supplies the Specimen Container, Metal Cap. The company sources it for laboratories, colleges, hospitals, dealers and importers and prepares quotations directly.

What do I need to include in an enquiry?
For the Specimen Container, Metal Cap, include the quantity, the label option you need (none, plain or printed) and the delivery location in India or abroad. Use the contact page or enquiry cart to receive a quotation.

Request a Quote

To get a quotation for the Specimen Container, Metal Cap, message us via the contact page or add it to the enquiry cart with your preferred label option.

Last updated: 24 September 2026

Specimen Container, Universal 30ml (Product Code: SLE/P/47) is a sterile 30 ml polystyrene container with a polypropylene screw cap used to collect and hold samples in clinical, microbiology and research laboratories. Sterilised with ethylene oxide (EO) and measuring 30 mm x 92 mm, it has a leak-tight cap and is intended for in vitro use only. The sterile containers are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is a 30 ml Universal Container Used For?

Universal containers are an everyday sample pot in many laboratories: they receive a sample, stay sealed on the way to the bench and hold it until testing. Because this one is supplied sterile (EO), it can be opened and filled directly for work that calls for a sterile container, such as microbiology practicals.

Open the cap only when you are ready to fill, avoid touching the inside of the cap or rim, then screw it down firmly and label the container. Store it upright and follow your institution's procedures for handling and disposing of specimens.

What to Specify When Ordering

• How many sterile containers you need.
• Confirmation that the sterile 30 ml size is right, or whether a larger container such as the Specimen Container, PP suits your samples.
• The delivery location in India or abroad.

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies this universal container to laboratories from Ambala, Haryana, India. It is one of several sample containers the company sources, so buyers can compare sizes and closures and order them together. For company background see the ScienceLab profile.

Related Scientific Lab Plasticware

Other containers and tubes used for collecting and splitting samples.

• Specimen Container, PP — a larger 120 ml container graduated on three sides.
• Specimen Container, Metal Cap — a 100 ml polystyrene container sealed by a lined metal cap.
• Universal Bottle PP Cap — a bottle-style alternative with a polypropylene cap.
• Micro Centrifuge Tube, 1.5ml — for dividing a sample into small aliquots.

Browse more containers in Scientific Lab Plasticware.

Frequently Asked Questions

Is the Specimen Container, Universal 30ml sterile?
Yes. The Specimen Container, Universal 30ml is listed as sterile, sterilised with EO (ethylene oxide). Keep the cap closed until you are ready to fill it, and avoid touching the inside of the cap or the rim.

What are the dimensions and capacity?
The Specimen Container, Universal 30ml holds 30 ml and measures 30 mm x 92 mm. If you need to check that it fits your racks, boxes or transport carriers, share their sizes when you enquire.

What is the container made of?
The Specimen Container, Universal 30ml has a polystyrene container and a polypropylene screw cap, both from virgin material. The leak-tight cap gives a leak-proof seal when it is screwed down firmly after filling.

How should filled containers be stored?
Store each filled Specimen Container, Universal 30ml upright with the screw cap fully tightened and the label facing outward. The container is intended for in vitro use only, so follow your laboratory's procedures for storing, transporting and disposing of specimens.

Who supplies the Specimen Container, Universal 30ml?
The Specimen Container, Universal 30ml is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources the containers for laboratories, institutions, dealers and importers, and quotes them together with related sample containers on request.

How do I request a quotation?
To request a quotation for the Specimen Container, Universal 30ml, send the quantity and delivery location in India or abroad through the contact page, or add the item to the enquiry cart. Mention any other containers so they can be quoted together.

Request a Quote

Send your required quantity of the Specimen Container, Universal 30ml through the contact page, or use the enquiry cart to list it with other laboratory supplies.

Last updated: 24 September 2026

Stirring Rod, Polypropylene (Product Code: SLE/P/48) is a white plastic rod, 7 mm in diameter and 250 mm long, used to stir and mix solutions in beakers and flasks in school and college laboratories. Made of chemical-resistant polypropylene, it gives younger students a plastic alternative to glass stirring rods. This school lab equipment is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Polypropylene Stirring Rod Used For?

Students use the rod to dissolve solids, mix reagents before a reaction and guide liquid down the rod when pouring from a beaker into a funnel or flask. The 250 mm length keeps the hand well above the rim of a typical beaker.

Stir gently with a circular motion rather than tapping the walls of the vessel, and rinse the rod before moving to a different solution. Very hot liquids and strong organic solvents can soften plastics, so use a glass rod for those jobs in the chemistry lab.

OEM Manufacturer

This stirring rod is produced by ScienceLab, the brand of Jain Scientific Equipments Private Limited, which acts as the OEM and supplies it directly from its own factory at Saha, Ambala, Haryana, India. The company is incorporated under CIN U29309HR2020PTC087597, and its production site at 449, HSIIDC Industrial Area, Saha holds Factory Licence AMB-ONLINE-CHD-J-414. Schools, colleges, dealers and importers receive quotations straight from the maker. Read the ScienceLab company profile.

Related Scientific Lab Plasticware

Items used together with a stirring rod when preparing solutions.

• Stirring Rod, Glass — a glass rod for hot liquids or solvents.
• Beaker, Polypropylene, Set of 4 — beakers in which solutions are stirred.
• Spatula, Polypropylene — to add solid chemicals before stirring.
• Polypropylene Conical Flask with Screw Cap — for mixing and storing prepared solutions.

Explore the wider Scientific Lab Plasticware range for beakers, flasks and bench tools.

Frequently Asked Questions

What size is the Stirring Rod, Polypropylene?
The Stirring Rod, Polypropylene is 7 mm in diameter and 250 mm long. That length suits stirring in beakers and flasks on a school bench while keeping fingers clear of the solution being mixed.

Is the plastic stirring rod chemical resistant?
Yes. The Stirring Rod, Polypropylene is made of chemical-resistant polypropylene and suits the common aqueous solutions used in teaching labs. For very hot liquids or strong organic solvents, use a glass stirring rod instead.

Why choose polypropylene instead of a glass stirring rod?
A Stirring Rod, Polypropylene does not shatter the way glass can when it is dropped or knocked against a beaker, which makes it practical for junior classes. A glass rod remains the better choice for high temperatures or solvents that affect plastics.

Who manufactures the Stirring Rod, Polypropylene?
The Stirring Rod, Polypropylene is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its licensed factory at Saha, Ambala, Haryana, India. Buyers get quotations, repeat supplies and bulk orders direct from the manufacturer.

How should the stirring rod be cleaned?
Rinse the Stirring Rod, Polypropylene with water straight after use, wash it with a mild laboratory detergent if residue remains, and let it dry before storing. Rinse it between different solutions during a practical so one reagent is not carried into another.

Can I order stirring rods in bulk?
Yes. The Stirring Rod, Polypropylene can be ordered in bulk for schools, colleges and distributors across India and international markets. Send the number of rods and the delivery location through the contact page for a quotation from the manufacturer.

Request a Quote

Request a quotation for the Stirring Rod, Polypropylene via the contact page or the enquiry cart. As the manufacturer, ScienceLab replies with the quotation directly.

Last updated: 24 September 2026

Test Tube Rack, Polypropylene (Product Code: SLE/P/49) is a white, autoclavable plastic rack used to hold and dry test tubes in school, college and microbiology laboratories. Each 235 mm rack has six 25 mm holes for standing tubes and six vertical pins for drying them upside down, and racks are sold in packs of 10. This test tube rack for schools is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Polypropylene Test Tube Rack Used For?

The rack keeps test tubes upright while students add reagents, watch colour changes or leave reactions to stand, freeing both hands for pipetting. After washing, tubes go upside down on the six pins so that water drains out and they are dry for the next class.

The 25 mm holes take tubes up to that diameter; narrower tubes will stand but may lean. Let tubes cool before placing them in the plastic rack after heating. The rack itself is autoclavable, so microbiology labs can sterilise it with their other equipment.

What to Specify When Ordering

• The number of packs (10 racks per pack).
• Your test tube diameter, since the holes are 25 mm.
• Any test tube holders, brushes or baskets to include.
• The delivery location in India or abroad.

OEM Manufacturer

Jain Scientific Equipments Private Limited operates under the ScienceLab name and is the OEM manufacturer of this test tube rack, producing it at its own licensed factory at Saha, Ambala, Haryana, India. Because the racks come straight from the factory in packs of 10, schools, colleges, dealers and importers can equip whole labs at once and return to the same maker for repeat orders. Visit the ScienceLab profile to learn about the company.

Related Scientific Lab Plasticware

Other racks and test tube accessories for the same bench.

• Test Tube Rack — a fold-and-snap polypropylene rack for smaller tubes.
• Polyprop Test Tube Basket — for carrying batches of tubes.
• Test Tube Rack With Drying Pegs — another rack design with drying pegs.
• Brush Test Tube — for cleaning tubes before they go on the drying pins.
• Test Tube Holder — for holding a tube safely while heating it.

Find more racks and stands in Scientific Lab Plasticware.

Frequently Asked Questions

How many tubes does the Test Tube Rack, Polypropylene hold?
The Test Tube Rack, Polypropylene has six 25 mm diameter holes for standing tubes upright and six vertical pins for drying tubes upside down. That gives space for six tubes in use and six more drying at the same station.

What size test tubes fit the rack?
The holes in the Test Tube Rack, Polypropylene are 25 mm in diameter, so they take tubes up to that outside diameter. Narrower tubes also stand in the holes but may lean; check your tube size and ask us if unsure.

Can the rack be autoclaved?
Yes. The Test Tube Rack, Polypropylene is autoclavable, which suits microbiology and biology labs that sterilise racks with other equipment. Let it cool before loading tubes, and never place hot tubes straight from a burner flame into the plastic rack.

How many racks come in a pack?
The Test Tube Rack, Polypropylene is sold in packs of 10 racks. Each rack is 235 mm long and 90 mm high, with its ends supported by columns, so a single pack can equip ten bench positions in a class.

Who manufactures the Test Tube Rack, Polypropylene?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Test Tube Rack, Polypropylene as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers can order direct from the manufacturer, including repeat packs.

What should a quotation request include?
For the Test Tube Rack, Polypropylene, give the number of 10-rack packs, the diameter of your test tubes and the delivery location in India or abroad. Add any holders, brushes or baskets needed, and use the contact page or enquiry cart.

Request a Quote

Order the Test Tube Rack, Polypropylene by sending your pack quantity through the contact page or adding it to the enquiry cart. Quotations are issued directly by the manufacturer.

Last updated: 24 September 2026

Plastic Bin with Flat Lids (Product Code: SLE/P/50) is a 50-litre black plastic bin with a flat lid used to collect waste or store bulk materials in laboratories, preparation rooms, workshops and classrooms. Its chemical-resistant body suits lab areas where splashes of reagents are likely, and the flat lid keeps the contents covered. The bin is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, for lab waste disposal and storage needs.

Specifications

What Is a 50 Litre Plastic Bin Used For?

In a laboratory the bin serves as a covered container for general waste and packaging, or for bulk items such as spare plasticware waiting to be used. The flat lid keeps contents out of sight and gives a level top, and the 50-litre size suits a lab corner or preparation room rather than an individual bench.

Keep sharps, broken glass and hazardous chemical waste out of a general bin; they need dedicated containers under your institution's waste rules. Empty and wipe the bin regularly, and label it clearly if it is kept for one specific waste stream.

Supplier

Jain Scientific Equipments Private Limited, the company behind the ScienceLab name, supplies this plastic bin as one of the lab-support items it sources for institutions. As a laboratory equipment supplier in India, it lets schools, colleges, laboratories and dealers add bins to a larger laboratory order and receive a single quotation from Ambala, Haryana. Company details are on the ScienceLab profile.

Related Laboratory Equipment

Other containers used for waste and storage around the laboratory.

• Waste Receptacle Pedal Action — a pedal-operated waste receptacle for hands-free use.
• Sharp Container Leak Proof Plastic — for needles and blades, which should not go in a general bin.
• Polypropylene Carboys — for storing bulk liquids.
• Container with sc cap — a screw-cap container for samples and powders.

This bin is listed in Scientific Lab Plasticware, where you will also find bottles, carboys and trays.

Frequently Asked Questions

What is the capacity of the Plastic Bin with Flat Lids?
The Plastic Bin with Flat Lids holds 50 litres. It is black plastic with a flat lid, sized for a lab corner, preparation room or workshop where a larger covered container is needed for waste or bulk storage.

Is the bin chemical resistant?
Yes, the Plastic Bin with Flat Lids is listed as chemical resistant. Even so, treat it as a general container and collect hazardous chemical waste in dedicated, labelled containers that follow your institution's disposal rules.

Can the bin be used for sharps or broken glass?
No. The Plastic Bin with Flat Lids is a general-purpose bin and should not be used for needles, blades or broken glass. Use a dedicated sharps container and a separate broken-glass box, and keep the bin for general waste or storage.

Who supplies the Plastic Bin with Flat Lids?
The Plastic Bin with Flat Lids is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company sources it for schools, colleges, laboratories and dealers and can quote it together with other laboratory items.

Is the bin available in other colours?
The Plastic Bin with Flat Lids is listed in black. If your waste-segregation scheme needs a different colour, ask through the contact page before ordering and we will tell you what can be supplied.

How do I get a quotation for the bin?
To get a quotation for the Plastic Bin with Flat Lids, send the number of bins and your delivery location in India or abroad through the contact page, or add it to the enquiry cart along with any other items you need.

Request a Quote

For the Plastic Bin with Flat Lids, share your quantity through the contact page or add it to the enquiry cart and ScienceLab will send a quotation.

Last updated: 24 September 2026