Centrifuge, Clinical (Product Code: SLE/LC/11) is a CPU-controlled bench centrifuge used to separate serum, plasma and blood samples in clinical and diagnostic laboratories. Speed is set from 300 to 4500 rpm in 100 rpm steps, the large LCD shows RPM and G-force, and the rotor capacity is listed as 8 x 15 ml or 12 x 10/7/5 ml tubes. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, among its analytical lab instruments in India.
| Parameter | Detail |
|---|---|
| Speed range | 300–4500 rpm, in increments of 100 rpm |
| Maximum RCF | 2490 x g, in increments of 100 x g |
| Speed accuracy | ±20 rpm |
| Run time | 30 sec to 99 min, or HOLD (continuous operation) |
| Driving motor | Brushless DC motor |
| Rotor capacity | 12 x 10 ml / 7 ml / 5 ml; 8 x 15 ml |
| Suitable tubes | 15 ml cell culture tubes and a range of collection tubes |
| Control | CPU controls all operating parameters; settings can be changed after the set speed is reached |
| Display | Large LCD showing RPM, G-force and run information |
| Quick spin | PULSE mode (press and hold) |
| Safety | Auto-lock lid while spinning; automatic lid release at the end of the run |
| Noise level | Less than 56 dB |
| Main uses | Separation of serum, plasma and blood samples |
| Product code | SLE/LC/11 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
In a hospital or diagnostic laboratory this centrifuge handles the steady flow of collection tubes that must be spun before testing. The 12-tube configuration takes 5, 7 and 10 ml tubes, and the 8-tube configuration accepts 15 ml tubes such as cell culture tubes. Timing begins only once the set speed is reached, so every sample receives the full programmed separation time, and gentle braking avoids disturbing the separated layers as the rotor slows.
For a short spin, press and hold PULSE: the rotor accelerates to the required speed and holds it for as long as the button is held. Settings can be changed once speed is reached, and the automatic lid release at the end saves time and protects samples from heat build-up. Running below 56 dB, it suits a busy clinical bench, and as a laboratory equipment supplier in India we can advise on matching tubes and racks.
Jain Scientific Equipments Private Limited, trading as ScienceLab, supplies the Centrifuge, Clinical from Ambala, Haryana, to hospitals, diagnostic laboratories, teaching institutions and dealers in India and international markets. The company confirms the rotor configuration for your tube sizes before it quotes. See the company profile for more.
Products that support the same blood-processing workflow:
All models are listed in our Centrifuges category.
What speed and RCF range does the Centrifuge, Clinical cover?
The Centrifuge, Clinical runs from 300 to 4500 rpm in 100 rpm steps and reaches up to 2490 x g, adjustable in 100 x g steps. Its listed speed accuracy is ±20 rpm, and both RPM and G-force appear on the LCD.
Which tubes can the Centrifuge, Clinical spin?
The rotor capacity of the Centrifuge, Clinical is listed as 12 x 10/7/5 ml or 8 x 15 ml, covering common collection tubes and 15 ml cell culture tubes. Confirm with us which rotor or adapters are supplied for the tube sizes you use.
When does the timer of the Centrifuge, Clinical start counting?
The Centrifuge, Clinical timer starts only once the set speed has been reached, so the separation time is accurate. Runs can be timed from 30 seconds to 99 minutes, or set to HOLD for continuous operation.
What does the PULSE button on the Centrifuge, Clinical do?
Pressing and holding PULSE on the Centrifuge, Clinical gives a quick spin: the rotor accelerates to the required speed and stays there until the button is released, which is useful for brief spin-downs between steps.
Is the lid of the Centrifuge, Clinical locked during a run?
Yes. The Centrifuge, Clinical has an auto-lock lid that stays locked while the rotor is spinning and releases automatically when the run is finished, saving time and protecting samples from heat build-up.
Who supplies the Centrifuge, Clinical?
The Centrifuge, Clinical is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India. The company quotes it with the right rotor configuration for hospitals, diagnostic laboratories, colleges and distributors in India and international markets.
Can a calibration certificate be provided for the Centrifuge, Clinical?
Availability of a calibration certificate for the Centrifuge, Clinical is confirmed when we quote. Contact us with the tube sizes you run, the quantity, the delivery location and any tender documents you need from us.
For a quotation on the Centrifuge, Clinical, reach us via the contact page or add it to the enquiry cart.
Last updated: 24 September 2026