Bracelet, Identification, Newborn (Product Code: SLE/DDS/011) is a single-use, non-elastic identification band used to identify newborns and small infants in maternity wards, neonatal units and other health care settings. The white band measures about 1.0 x 15 cm, has a writing space of about 7 cm for an ordinary ballpoint pen, adjusts through perforations and has a tamper-proof closure that is irreversibly damaged on removal. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Newborn ID Bracelet Used For?

In a maternity ward, a band fitted soon after birth keeps each baby identifiable from the delivery room to discharge. Staff write the identification details on the band with an ordinary ballpoint pen; the writing cannot be erased and the band resists water and common cleaning solvents, so the details are not lost during bathing and routine cleaning.

The band can be worn around the wrist or the ankle, and its instructions note that the risk of removal is lower around the ankle. Adjust the length with the perforations, never tighten it excessively, and check that it is intact during consultations; when the baby is discharged, destroy the band to prevent re-use. Hospital stores that buy disposable lab equipment in India together with ward supplies can add the bands to the same order.

Supplier

ScienceLab is the name under which Jain Scientific Equipments Private Limited trades from Ambala, Haryana, India. The company supplies this newborn identification bracelet as a sourced item for maternity hospitals, neonatal units, health centres and distributors in India and international markets. Learn more on the ScienceLab profile page.

Related Medical Consumables & Dressings

Other items for maternity and newborn care:

• ID Bracelet, Child, Red — identification band for older children.
• ID Bracelet, Child, Blue — blue identification band for older children.
• Clamp, Umbilical Cord, Sterile — sterile cord clamp applied at birth.
• Newborn Warmer System Basic — warmer for the baby after delivery.
• Baby Cot Hospital Bassinet On Castors — mobile cot for the baby on the ward.

Browse Medical Consumables & Dressings for more ward supplies.

Frequently Asked Questions

What size is the Bracelet, Identification, Newborn?
The Bracelet, Identification, Newborn measures approximately 1.0 x 15 cm (width x length), with a writing space of about 7 cm. Its length is adjusted through perforations along the strap to fit a newborn’s wrist or ankle.

How do you write on the newborn ID bracelet?
Staff write on the newborn ID bracelet with a common ballpoint pen. The writing is non-erasable and the band is resistant to water and common cleaning solvents, so no special marker or printer is needed.

Can the newborn bracelet be removed and re-used?
No. The Bracelet, Identification, Newborn has a definitive closure that is irreversibly damaged when the band is removed, which makes it tamper proof and non-transferable. It is single use and should be destroyed at discharge.

Should the bracelet go on the wrist or the ankle?
The newborn identification bracelet can be worn around the wrist or the ankle. Its instructions note that the risk of removal is reduced when it is fitted around the ankle, and it should never be tightened excessively.

What material is the newborn ID band made of?
The newborn ID band is made of supple, non-stretch plastic, specified as LDPE-based, vinyl or equivalent. It is described as atraumatic, non-toxic and hypo-allergenic, and it comes in white.

Who supplies the Bracelet, Identification, Newborn?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Bracelet, Identification, Newborn to maternity hospitals, neonatal units, health centres and distributors in India and international markets.

What does a quotation for newborn ID bracelets need?
A quotation for newborn ID bracelets needs the number of bands, whether child-size ID bracelets are also required, and the delivery destination. Send the details via the contact page and ScienceLab will reply with price and availability.

Request a Quote

Ask for pricing on the Bracelet, Identification, Newborn through the ScienceLab contact page, or add the bands to the enquiry cart with cord clamps and other maternity supplies.

Last updated: 24 September 2026

Tape Umbilical, 3mmx50m, Non-sterile (Product Code: SLE/DDS/012) is a braided, flat cotton ligature tape used to tie the umbilical cord after birth in delivery rooms and maternity units. It is 100% cotton and non-absorbable, 3 mm wide and supplied as a 50 m non-sterile roll, from which facilities cut single-use lengths and sterilise them in a steam steriliser. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Umbilical Tape Used For?

Umbilical tape is a ligature thread for tying off the umbilical cord. A braided, flat cotton tape was selected for this job because it avoids damaging the cord and keeps knots from coming undone – the product notes specifically advise against monofilament, round or thin ligature thread.

The roll is delivered non-sterile, so the usual routine is to cut lengths in advance, pack them and sterilise them in a steam steriliser before they go to the delivery room. A single 50 m roll yields many ties. Hospitals that source instruments and autoclaves from one laboratory equipment supplier in India can add umbilical tape to the same order.

Supplier

Jain Scientific Equipments Private Limited, operating under the ScienceLab name in Ambala, Haryana, India, supplies this umbilical tape roll to maternity hospitals, midwifery services, relief programmes and distributors in India and international markets. It belongs to a sourced range of delivery and dressing consumables. The ScienceLab profile page has more about the company.

Related Medical Consumables & Dressings

Items used with umbilical tape at delivery and for preparing it:

• Clamp, Umbilical Cord, Sterile — ready-to-use sterile plastic alternative to a tied ligature.
• Surgical Instruments, Delivery /SET — instrument set used during the delivery.
• Autoclave, Stainless Steel, 15 Litre — steam steriliser for sterilising cut lengths of tape.
• Bracelet, Identification, Newborn — identification band fitted to the newborn.

See more delivery and dressing items in Medical Consumables & Dressings.

Frequently Asked Questions

What size is the Tape Umbilical, 3mmx50m, Non-sterile?
The Tape Umbilical, 3mmx50m, Non-sterile is a braided, flat cotton tape 3 mm wide, supplied on a roll 50 m long. Facilities cut it to the length needed for each ligature, and each cut length is for single use.

Is the umbilical tape sterile?
No. The umbilical tape roll is supplied non-sterile. According to its instructions, the ligature thread can be sterilised in a steam steriliser, so cut lengths should be sterilised by the facility before they are used to tie the cord.

Why is braided flat tape used instead of ordinary thread?
Braided flat cotton tape is chosen for tying the umbilical cord to prevent damage to the cord and to stop knots from untying. The product instructions advise against monofilament, round or thin ligature thread for this purpose.

Is the umbilical tape absorbable?
No. The Tape Umbilical, 3mmx50m, Non-sterile is made of 100% cotton and is non-absorbable. It is intended as a ligature thread for tying the umbilical cord after birth.

Who supplies the Tape Umbilical, 3mmx50m, Non-sterile?
The Tape Umbilical, 3mmx50m, Non-sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to maternity hospitals, midwifery services, relief programmes and distributors in India and international markets.

How do I request a quotation for umbilical tape?
To request a quotation for umbilical tape, send the number of 50 m rolls, any related items such as cord clamps, and the delivery destination through the contact page. ScienceLab will reply with price and availability.

Request a Quote

Enquire about the Tape Umbilical, 3mmx50m, Non-sterile through the ScienceLab contact page, or add it to the enquiry cart along with other maternity consumables.

Last updated: 24 September 2026

Cotton Wool, 500g, Roll, Non-Sterile (Product Code: SLE/DDS/013) is a highly absorbent roll of surgical-grade cotton wool used for dressings and for skin disinfection before injections in hospitals, clinics and first-aid rooms. The 500 g net roll is 100% cotton that has been purified, bleached and carded; it is not pre-cut, so staff tear off only what they need. It is supplied non-sterile by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Cotton Wool Roll Used For?

Cotton wool is the everyday absorbent of a treatment room. Small pads torn from the roll are moistened with the facility’s skin disinfectant to wipe an injection site, used to clean around a wound, or placed as a soft absorbent layer within a dressing. Purifying and bleaching remove the natural waxes of raw cotton, which is what lets surgical cotton wool take up water readily.

Tear pieces from the roll with clean hands and keep the rest closed in its wrapping, away from dust and moisture, because the roll is non-sterile. Where a sterile layer is needed directly on a wound, use a sterile gauze compress instead. A 500 g roll is a practical size for refilling a first aid box in a lab, school or workshop as well as for ward use.

Supplier

Jain Scientific Equipments Private Limited, which does business as ScienceLab from Ambala, Haryana, India, supplies this cotton wool roll to hospitals, clinics, schools, laboratories and distributors in India and international markets. It is a sourced item within the company’s dressing and first-aid range. The ScienceLab profile page gives more background on the company.

Related Medical Consumables & Dressings

Products used with cotton wool for injections and dressings:

• Syringe, Disposable, 5ml, Sterile — syringe for the injection that follows skin cleaning.
• Needle, Disposable, 23G, Sterile — sterile disposable needle for the injection.
• Compress, Gauze, 10x10cm, Sterile — sterile compress where a sterile wound layer is required.
• Bandage, Gauze, 8cmx4m, Roll — gauze bandage for holding a dressing in place.
• Hand sanitizer Alcohol >60% 500ml w. Pump — hand hygiene before handling the roll.

View the whole Medical Consumables & Dressings category.

Frequently Asked Questions

How much cotton wool is in one roll?
One Cotton Wool, 500g, Roll, Non-Sterile contains a net weight of 500 g of cotton wool. The roll is not pre-cut, so users tear off pieces of the size they need for each dressing or injection.

What grade of cotton is used in the cotton wool roll?
The cotton wool roll is 100% cotton of surgical grade that has been purified, bleached and carded. It is water absorbent and described as a high-absorbency cotton wool for dressing work and skin disinfection before injections.

Is the Cotton Wool, 500g, Roll, Non-Sterile sterile?
No. The Cotton Wool, 500g, Roll, Non-Sterile is supplied non-sterile and is intended for single use. For procedures that need a sterile material in contact with a wound, use sterile gauze compresses or ask ScienceLab about sterile options.

How is cotton wool used before an injection?
Before an injection, a small piece torn from the cotton wool roll is moistened with the facility’s skin disinfectant and wiped over the injection site. The same absorbent cotton wool is also used in dressings, as its instructions for use state.

How should a cotton wool roll be stored?
Store the cotton wool roll in its wrapping in a clean, dry place and tear pieces off with clean hands. Because the 500 g roll is non-sterile, keeping it closed between uses helps protect it from dust and moisture.

Who supplies the Cotton Wool, 500g, Roll, Non-Sterile?
The Cotton Wool, 500g, Roll, Non-Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, clinics, schools, laboratories and distributors in India and international markets.

What does a cotton wool quotation need?
A quotation for cotton wool rolls needs the number of 500 g rolls and the delivery destination, plus any syringes, needles or dressings to be priced together. Send the request through the contact page for price and availability.

Request a Quote

Request a price for the Cotton Wool, 500g, Roll, Non-Sterile via the ScienceLab contact page, or add it to the enquiry cart with the rest of your dressing and injection supplies.

Last updated: 24 September 2026

Non-Pneumatic Anti-Shock Garment (Product Code: SLE/DDS/014) is a reusable neoprene garment with Velcro fastenings used as a first-aid measure for women with uncontrollable postpartum haemorrhage (PPH) in maternity units, health centres and referral transport. Listed in a small size, it is intended to help control the bleeding, reverse the shock and stabilise the patient for safe transport to comprehensive obstetric care, and it has no metal parts. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Key Details

What Is the Anti-Shock Garment Used For?

Postpartum haemorrhage can become critical faster than a woman can reach a facility able to treat its cause. The non-pneumatic anti-shock garment is intended for that gap: it is applied to a woman with uncontrollable PPH to help control the bleeding and reverse the shock, so that she can be stabilised and transported safely to comprehensive obstetric care.

Being non-pneumatic, the garment needs no pump or pressure gauge; the neoprene is closed with Velcro. It has no metal parts, so it is described as safe for X-rays and MRIs, and it is reusable. It should be applied and removed only by health workers trained in its use, following the protocol of their facility or maternal-health programme.

What to Specify When Ordering

• Number of garments required
• Size: this listing is the small size – ask us about any other sizes before ordering
• Other delivery-room items to be quoted together
• Delivery destination

Supplier

Jain Scientific Equipments Private Limited, trading as ScienceLab from Ambala, Haryana, India, supplies this non-pneumatic anti-shock garment to maternity hospitals, health centres, maternal-health programmes and distributors in India and international markets. It is a sourced item listed in the company’s hospital range alongside delivery-room consumables and furniture. More about the company is on the ScienceLab profile page.

Related Medical Consumables & Dressings

Other items for delivery rooms and obstetric emergencies:

• Labour Delivery Bed With Accessories — delivery bed for the labour room.
• Blanket, Survival, 220x140cm — protects the patient against cold during transport.
• Foldable Stretcher — for moving a patient to the referral vehicle.
• Infusion Giving Set, Sterile — sterile IV giving set for intravenous fluids.
• Clamp, Umbilical Cord, Sterile — sterile cord clamp used at delivery.

Browse all items in Medical Consumables & Dressings.

Frequently Asked Questions

What is the Non-Pneumatic Anti-Shock Garment used for?
The Non-Pneumatic Anti-Shock Garment is intended for women with uncontrollable postpartum haemorrhage (PPH). According to its description, it is used to control the bleeding, reverse the shock and stabilise the patient for safe transport to a comprehensive obstetric care facility.

What is the anti-shock garment made of?
The non-pneumatic anti-shock garment is made of lightweight neoprene with Velcro fastenings. It is described as lightweight, flexible and comfortable for the wearer, and because it is non-pneumatic it does not need to be inflated.

Can a patient have an X-ray or MRI while wearing the garment?
The Non-Pneumatic Anti-Shock Garment has no metal parts and is described as safe for X-rays and MRIs. Imaging decisions remain with the treating clinical team and should follow the facility’s own protocols.

Is the Non-Pneumatic Anti-Shock Garment reusable?
Yes. The Non-Pneumatic Anti-Shock Garment is listed as reusable. The product description does not specify a cleaning method or a number of uses, so please ask ScienceLab through the contact page for care and reprocessing information before ordering.

What size is the anti-shock garment?
This anti-shock garment is listed as a small-sized NASG. The description gives no body measurements for the size, so confirm your fit requirements and ask about any other sizes through ScienceLab before placing an order.

Who should apply the anti-shock garment?
The Non-Pneumatic Anti-Shock Garment should be applied and removed only by health workers trained in its use, following the clinical protocol of their facility or maternal-health programme and the judgement of the treating team.

Who supplies the Non-Pneumatic Anti-Shock Garment?
The Non-Pneumatic Anti-Shock Garment is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to maternity hospitals, health centres, maternal-health programmes and distributors in India and international markets.

Request a Quote

To obtain a quotation for the Non-Pneumatic Anti-Shock Garment, send the number of garments and your delivery destination via the ScienceLab contact page, or add it to the enquiry cart with other delivery-room items.

Last updated: 24 September 2026

Syringe, Insulin, 1ml, U-100 (Product Code: SLE/HLI/01) is a 1 ml insulin syringe with a U-100 unit scale, used to measure and inject insulin doses in hospitals, clinics and community health settings. Nurses and diabetes care teams use it because doses are read in units, not millilitres; it is a three-piece syringe – barrel with nozzle, stopper and piston/plunger – with a fine stainless steel needle under an orange needle cap. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the Insulin Syringe Used For?

Insulin is prescribed in units rather than millilitres. A U-100 syringe is scaled for U-100 insulin, which contains 100 units in every millilitre, so the full 1 ml barrel corresponds to 100 units and each dose is drawn up by reading the unit marks directly – no conversion from millilitres is needed at the bedside.

Always match the syringe to the insulin: a U-100 syringe must only be used with U-100 insulin. The orange cap helps staff tell insulin syringes apart from general-purpose syringes on a tray, and used syringes with their needles should go straight into a sharps container. Nursing and pharmacy colleges also use them to teach unit-based dose measurement, so they are often ordered with pharmacy college lab equipment.

What to Specify When Ordering

• Number of U-100 insulin syringes
• Needle gauge and length required (not stated in this listing – confirm with us)
• Sterility and packaging requirements
• Delivery destination

Supplier

The insulin syringe is supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana, India. The company sources it for hospitals, clinics, pharmacies, colleges and distributors in India and international markets as part of its syringe and needle range. See the ScienceLab profile page for company information.

Related Medical Consumables & Dressings

Other injection supplies from the same range:

• Syringe, Disposable, 1ml, Sterile — sterile disposable syringe of the same 1 ml capacity.
• Lancet, Blood, Sterile, Disposable — sterile lancet for taking a blood sample.
• Cotton Wool, 500g, Roll, Non-Sterile — for skin disinfection before the injection.
• Sharp Container Leak Proof Plastic — for disposing of used syringes and needles.

The full syringe and dressing range is in Medical Consumables & Dressings.

Frequently Asked Questions

What does U-100 mean on the insulin syringe?
U-100 means the Syringe, Insulin, 1ml, U-100 is scaled for insulin containing 100 units per millilitre. Its 1 ml barrel therefore represents 100 units, and doses are read directly from the unit markings rather than in millilitres.

What parts does the insulin syringe have?
The Syringe, Insulin, 1ml, U-100 is a three-piece syringe made up of a barrel with nozzle, a stopper and a piston/plunger. It comes with a stainless steel fine needle protected by an orange needle cap.

Can a U-100 insulin syringe be used with other insulin strengths?
No. A U-100 insulin syringe should only be used with U-100 insulin, because its unit scale assumes 100 units per millilitre. Using it with insulin of a different concentration would give an incorrect dose.

What needle gauge does the insulin syringe have?
The listing for the Syringe, Insulin, 1ml, U-100 describes a stainless steel fine needle but does not state its gauge or length. Ask ScienceLab through the contact page to confirm the needle size available before ordering.

Is the insulin syringe sterile?
The product description for the Syringe, Insulin, 1ml, U-100 does not state sterility or packaging details. Please confirm sterility, packaging and pack quantity with ScienceLab before ordering syringes for clinical use.

Who supplies the Syringe, Insulin, 1ml, U-100?
The Syringe, Insulin, 1ml, U-100 is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, clinics, pharmacies, colleges and distributors in India and international markets.

What does a quotation for insulin syringes need?
A quotation for U-100 insulin syringes needs the quantity, the needle size and packaging you require, and the delivery destination. Send these details and ScienceLab will respond with price and availability.

Request a Quote

Ask for a quotation on the Syringe, Insulin, 1ml, U-100 through the ScienceLab contact page, or add it to the enquiry cart together with needles, lancets and other injection supplies.

Last updated: 24 September 2026

Syringe, Disposable, 20ml, Sterile (Product Code: SLE/HLI/02) is a sterile, disposable 20 ml syringe with a Luer nozzle, used to inject fluids into, or withdraw fluids from, the body in hospitals, clinics and treatment rooms. Its 20 ml capacity suits larger-volume tasks such as drawing up and diluting medicines or aspirating fluid, and it comes in two-piece or three-piece construction. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the 20 ml Syringe Used For?

A 20 ml syringe handles volumes that are too large for everyday injection syringes: drawing up and mixing medicines for dilution, withdrawing fluid, or flushing and irrigating. The Luer nozzle takes standard Luer-fitting needles and connects to many tubing adaptors, so one syringe size covers several ward tasks.

The three-piece version has a separate stopper on the plunger tip, which many users find gives a smoother, more controlled push; in the two-piece version the plunger seals directly against the barrel. Laboratories also buy 20 ml syringes as disposable lab equipment in India for measuring and transferring liquid samples.

What to Specify When Ordering

• Construction: two-piece or three-piece
• Number of 20 ml syringes
• Needles required, with gauge (ordered separately)
• Delivery destination

Supplier

Jain Scientific Equipments Private Limited, the company behind the ScienceLab brand in Ambala, Haryana, India, supplies this 20 ml syringe to hospitals, clinics, laboratories and distributors in India and international markets. The syringe is a sourced item from the company’s range of injection consumables. Details about the company are on the ScienceLab profile page.

Related Medical Consumables & Dressings

Needles and alternative syringe sizes for the same tasks:

• Needle, Disposable, 19G, Sterile — wide-bore needle for drawing up larger volumes.
• Needle, Disposable, 21G, Sterile — sterile needle for general injections.
• Syringe, Disposable, 10ml, Sterile — smaller syringe when 20 ml is more than the task needs.
• Syringe, Feeding, 50ml, Luer Tip, sterile — larger Luer-tip syringe for feeding.
• Sharp Container Leak Proof Plastic — for disposing of used syringes and needles.

All syringe sizes are listed in Medical Consumables & Dressings.

Frequently Asked Questions

What is the capacity of the Syringe, Disposable, 20ml, Sterile?
The Syringe, Disposable, 20ml, Sterile has a capacity of 20 ml. It is used to inject fluids into, or withdraw fluids from, the body when a larger volume is needed than a 2, 5 or 10 ml syringe can hold.

Is the 20 ml syringe two-piece or three-piece?
The 20 ml syringe is listed in two constructions: two-piece, with a barrel with Luer nozzle and a piston/plunger, or three-piece, which adds a stopper. State which construction you prefer when you request a quotation.

Does the 20 ml syringe come with a needle?
The listing for the Syringe, Disposable, 20ml, Sterile describes the syringe only and does not mention a needle. Its Luer nozzle accepts Luer-fitting needles, and sterile disposable needles in several gauges are available separately from ScienceLab.

What graduation does the 20 ml syringe have?
The product description for the Syringe, Disposable, 20ml, Sterile does not state its scale intervals. If your procedure needs a particular graduation, ask ScienceLab through the contact page to confirm the markings before you order.

Is the Syringe, Disposable, 20ml, Sterile reusable?
No. The Syringe, Disposable, 20ml, Sterile is a sterile, disposable syringe for single use. After use, discard it together with any attached needle in a sharps container, following the facility’s waste procedure.

Who supplies the Syringe, Disposable, 20ml, Sterile?
The Syringe, Disposable, 20ml, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to hospitals, clinics, laboratories and distributors in India and international markets.

Request a Quote

For a quotation on the Syringe, Disposable, 20ml, Sterile, send the quantity and preferred construction through the ScienceLab contact page, or add it to the enquiry cart with the needles you need.

Last updated: 24 September 2026

Syringe, Disposable, 10ml, Sterile (Product Code: SLE/HLI/03) is a sterile, disposable 10 ml Luer-nozzle syringe used to inject fluids into, or withdraw fluids from, the body in wards, clinics and treatment rooms. Its easy-to-read barrel scale has intervals of 0.2, 0.5 or 1.0 ml with graduation lines at 1.0 or 5.0 ml, and it is available as a two-piece or three-piece syringe. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the 10 ml Syringe Used For?

The 10 ml syringe is the general-purpose size on most ward trays: it is used to draw up and give medicines, to add diluent to powdered preparations and to take fluid samples. Because the scale is available with intervals as fine as 0.2 ml, the same size covers both whole-millilitre volumes and more carefully measured part doses.

For an accurate reading, draw up slightly more than needed, expel air bubbles with the nozzle pointing upward, then push the plunger until the front edge of the stopper meets the required line. Colleges buying pharmacy lab equipment in India often add 10 ml syringes for practical classes in measuring and transferring liquid volumes.

What to Specify When Ordering

• Construction: two-piece or three-piece
• Preferred scale interval: 0.2, 0.5 or 1.0 ml
• Quantity, and needle gauge if needles are to be quoted too
• Delivery destination

Supplier

ScienceLab is the trading name used by Jain Scientific Equipments Private Limited of Ambala, Haryana, India, which supplies this 10 ml syringe as part of a sourced range of syringes, needles and infusion sets. Hospitals, clinics, colleges and distributors in India and international markets can combine several syringe sizes in a single order. Read more on the ScienceLab profile page.

Related Medical Consumables & Dressings

Needles, alternative sizes and injection-site supplies:

• Syringe, Disposable, 10ml, W/ndl, 21G — the same syringe size supplied with a needle.
• Needle, Disposable, 23G, Sterile — separate sterile needle for this syringe.
• Syringe, Disposable, 5ml, Sterile — smaller syringe for lower volumes.
• Syringe, Disposable, 20ml, Sterile — larger syringe for volumes above 10 ml.
• Cotton Wool, 500g, Roll, Non-Sterile — for skin disinfection before an injection.

Compare every size in Medical Consumables & Dressings.

Frequently Asked Questions

What are the scale intervals on the 10 ml syringe?
The Syringe, Disposable, 10ml, Sterile has a graduated, easy-to-read barrel scale with intervals of 0.2, 0.5 or 1.0 ml and graduation lines at 1.0 or 5.0 ml. Tell ScienceLab which interval you need when you order.

Is there a 10 ml syringe with a needle attached?
Yes, as a separate listing. This Syringe, Disposable, 10ml, Sterile listing does not mention a needle, while the ScienceLab catalogue also offers a 10 ml syringe supplied with a needle as a separate item, so choose whichever suits your workflow.

What is the difference between the two-piece and three-piece versions?
The two-piece 10 ml syringe has a barrel with Luer nozzle and a piston/plunger; the three-piece version adds a separate stopper on the plunger. Both have the same 10 ml capacity and Luer nozzle, so state your preference in the enquiry.

What is the 10 ml disposable syringe used for?
The Syringe, Disposable, 10ml, Sterile is intended to inject fluids into, or withdraw fluids from, the body. Its 10 ml size is a common choice for drawing up medicines and taking fluid samples in wards, clinics and treatment rooms.

Can the 10 ml syringe be reused?
No. The Syringe, Disposable, 10ml, Sterile is supplied sterile for one use only. Once used, it should go into a sharps container with its needle rather than be cleaned, re-sterilised or used for another patient.

Who supplies the Syringe, Disposable, 10ml, Sterile?
Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, supplies the Syringe, Disposable, 10ml, Sterile to hospitals, clinics, colleges and distributors in India and international markets.

Request a Quote

Request pricing for the Syringe, Disposable, 10ml, Sterile by sending your quantity, construction and scale interval through the ScienceLab contact page, or add it to the enquiry cart with other injection supplies.

Last updated: 24 September 2026

Syringe, Disposable, 2ml, Sterile (Product Code: SLE/HLI/04) is a sterile, disposable 2 ml syringe with a Luer nozzle used for small-volume injections and for withdrawing small amounts of fluid in clinics, wards and treatment rooms. Its barrel scale reads in fine 0.1 or 0.2 ml intervals with a graduation line at each 1.0 ml, which makes part-millilitre doses easy to measure, and it is available as a two-piece or three-piece syringe. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.

Specifications

What Is the 2 ml Syringe Used For?

Small syringes exist because accuracy depends on scale: a dose of a fraction of a millilitre is far easier to measure on a 2 ml barrel marked every 0.1 ml than on a larger syringe with coarser markings. The 2 ml size is therefore used for small-volume injections and for drawing off small quantities of fluid.

As a rule, pick the smallest syringe that holds the whole dose, draw up, tap out air bubbles and set the plunger stopper exactly on the required line before giving the injection. Teaching and research labs buying disposable lab equipment in India also use 2 ml syringes to dispense small liquid volumes during practical work.

What to Specify When Ordering

• Construction: two-piece or three-piece
• Scale interval: 0.1 or 0.2 ml
• Quantity, plus any needles to be quoted with the syringes
• Delivery destination

Supplier

From its base in Ambala, Haryana, India, Jain Scientific Equipments Private Limited – trading as ScienceLab – supplies this 2 ml syringe to hospitals, clinics, colleges, laboratories and distributors in India and international markets. It is sourced alongside the other syringe sizes and needles in the catalogue, so mixed orders are straightforward to quote. The ScienceLab profile page describes the company.

Related Medical Consumables & Dressings

Other small-volume syringes and injection supplies:

• Syringe, Disposable, 1ml, Sterile — smaller syringe for doses below 1 ml.
• Syringe, Insulin, 1ml, U-100 — for insulin doses measured in units.
• Syringe, Disposable, 5ml, Sterile — next size up for larger doses.
• Needle, Disposable, 23G, Sterile — separate sterile needle for the Luer nozzle.
• Sharp Container Leak Proof Plastic — for used syringes and needles.

See all syringe sizes in Medical Consumables & Dressings.

Frequently Asked Questions

What is the scale on the 2 ml syringe?
The Syringe, Disposable, 2ml, Sterile has an easy-to-read graduated barrel with scale intervals of 0.1 or 0.2 ml and a graduation line at every 1.0 ml. Specify the interval you need in your quotation request.

Why choose a 2 ml syringe for small doses?
A 2 ml syringe is chosen for small doses because its fine 0.1 or 0.2 ml intervals let staff measure fractions of a millilitre more precisely than on a larger syringe with coarser markings. Use the smallest syringe that holds the full dose.

Is the 2 ml syringe two-piece or three-piece?
The 2 ml syringe is listed as either two-piece, with a barrel with Luer nozzle and a piston/plunger, or three-piece, which adds a stopper. Both have the same 2 ml capacity, so state your preference when ordering.

Does the Syringe, Disposable, 2ml, Sterile include a needle?
The listing for the Syringe, Disposable, 2ml, Sterile does not mention a needle. Its Luer nozzle accepts Luer-fitting needles, and ScienceLab lists sterile disposable needles separately, so add the gauge you need to your enquiry.

Can the 2 ml syringe be used more than once?
No. The 2 ml syringe is a sterile, disposable item intended for a single use. Discard each used syringe and needle straight into a sharps container and never share a syringe between patients.

Who supplies the Syringe, Disposable, 2ml, Sterile?
The Syringe, Disposable, 2ml, Sterile is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab) of Ambala, Haryana, India, to hospitals, clinics, colleges, laboratories and distributors in India and international markets.

Request a Quote

Send the quantity, construction and scale interval for the Syringe, Disposable, 2ml, Sterile through the ScienceLab contact page, or collect it in the enquiry cart with needles and other syringe sizes for one quotation.

Last updated: 24 September 2026