The CRDI (Common Rail Direct Injector) System is a compact teaching set with a CRDI engine fuel pump, an injector nozzle cut open to show its inside, and a complete injector nozzle. The incised sections are painted in different colours. The pump and nozzles are production units on a training stand built in Ambala, and at about 5 kg the set passes easily round a table group.
| Parameter | Detail |
|---|---|
| Type | Educational unit for the CRDI fuel pump and injector nozzle |
| Composition | CRDI engine fuel pump, incised injector nozzle, injector nozzle |
| Finish | Each incised section painted in a different colour |
| Pump and nozzles | Sourced production units (as listed) |
| Weight | Approx. 5 kg |
| Size | Approx. 400 × 300 × 300 mm |
| Product code | SLE/ATE/19 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Tank-to-nozzle fuel path. Starting from the pump, students put the common rail circuit in order: low-pressure supply, filter and water separator, high-pressure pump, rail, then injector. For each stage they write one line on what it adds, with the pump on the bench as the reference point.
Common rail against pump-timed injection. Set the unit beside a VE distributor pump system and an inline pump system. Students note that in those older designs the pump meters and times every injection, while in common rail the pump only builds pressure and the control unit opens each injector to set timing and quantity.
Nozzle cutaway study. Compare the incised nozzle with the complete one. Students sketch the needle, its seat, the pressure chamber and the spray holes, then mark which surfaces must stay clean for a sharp cut-off at the end of each injection.
From parts to symptoms. Move on to the diesel engine fault diagnosis trainer and link misfire, smoke and rough idle on a running engine to the nozzle parts the group has just drawn.
It raises the diesel delivered by the low-pressure supply to the very high pressure held in the common rail. The rail then feeds every injector at the same pressure. Unlike older pumps, it does not time the injections; the engine control unit does that by opening each injector.
The inside: the needle, its seat, the fuel passages and the chamber where pressure lifts the needle. The complete nozzle shows what a technician handles on the engine. Looking at both, students connect outside symptoms such as leakage or poor spray with what happens within.
It energises a solenoid valve in the injector for a very short pulse. That releases pressure above the needle, so rail pressure lifts the needle and fuel sprays into the cylinder. A longer pulse delivers more fuel, and several small injections can be made in one stroke.
Misfire, rough running at idle, heavy exhaust smoke and a louder diesel knock are the common ones, often with higher fuel use. A leaking injector can also show wet fuel around its body. Fault codes and injector function checks then confirm which cylinder is affected.
Deposits, often called lacquer, build up on the control valve and needle, mostly from poor or contaminated fuel. The needle then moves late or does not seat fully, so delivery goes wrong and the nozzle may drip. Clean, filtered fuel and regular water draining reduce the risk.
No powered operation is listed. It is an educational unit for explaining the parts and the operating principle, so it works on an ordinary table. Handle the sectioned nozzle carefully, keep it free of dust and oil, and store the pieces together after each class.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 20 November 2026