Test Tube 12 x 100 mm (Product Code: SCI-656/084) is a small rimmed (edged) borosilicate glass test tube used to hold, mix and heat small quantities of chemicals in qualitative tests and school experiments. The 12 x 100 mm size keeps reagent use low for student spot tests, and the rim makes pouring cleaner and gives a holder a firm edge to grip. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 12 x 100 mm Test Tube Used For?

Small test tubes like this are used for salt analysis and qualitative tests for ions, observing colour changes and precipitates, simple food tests in biology, and any reaction where only a few drops of reagent are needed. Keeping the volume small makes each test quicker and cheaper to run for large classes.

Hold the tube in a test tube holder when heating, point the mouth away from yourself and others, and fill it no more than about a third. Store clean tubes upside down in a test tube rack so they drain and stay dust-free.

OEM Manufacturer

The Test Tube 12 x 100 mm is manufactured by Jain Scientific Equipments Private Limited — the company that trades as ScienceLab — as the OEM (original equipment manufacturer), at its own licensed factory at Saha, Ambala, Haryana, India. It is supplied factory-direct to schools, colleges, dealers and importers.

Institutional buyers completing vendor registration can use GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Repeat orders for the next session are handled by the manufacturer — ask us, or read more on the ScienceLab profile.

Related Laboratory Equipment

Qualitative testing with small test tubes goes more smoothly with these accessories:

• Test Tube Holders — grip the tube safely while heating
• Test Tube Stand — keeps a set of tubes upright on the bench
• Tube Brush — cleans the narrow bore after use
• Test Tube Clips — a lighter alternative for holding tubes
• Test Tube 25 x 200mm — a larger rimless tube for boiling bigger volumes

More test tubes and holders are in the Laboratory Equipment category.

Frequently Asked Questions

What size is the Test Tube 12 x 100 mm?
The Test Tube 12 x 100 mm (SCI-656/084) measures 12 x 100 mm and has an edged, or rimmed, mouth. The small size suits spot tests and qualitative analysis that use only a few drops of reagent.

What is the Test Tube 12 x 100 mm made of?
The Test Tube 12 x 100 mm is made of transparent borosilicate glass that is chemical resistant and heat resistant, so colour changes and precipitates are easy to see and the tube can be warmed over a flame.

What is the benefit of the rim on the Test Tube 12 x 100 mm?
The rim on the Test Tube 12 x 100 mm reinforces the mouth, helps liquids pour without running down the outside, and gives a test tube holder a firm edge to grip during heating.

Who manufactures the Test Tube 12 x 100 mm?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Test Tube 12 x 100 mm. It is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and quoted directly.

Is there a fixed pack size for the Test Tube 12 x 100 mm?
The listing does not state a pack size for the Test Tube 12 x 100 mm (SCI-656/084). Tell us the number of tubes you need through the contact page and the manufacturer will quote for that quantity.

What should a quotation request for these test tubes include?
For the Test Tube 12 x 100 mm, include the code SCI-656/084, the quantity, any holders, stands or brushes to be quoted together, and the delivery location in India or abroad.

Request a Quote

Ask for a quotation on the Test Tube 12 x 100 mm via the contact page or add it to the enquiry cart. The manufacturer quotes you directly.

Last updated: 24 September 2026

Probe (Product Code: SCI-652/085) is a rimless (edgeless) borosilicate glass test tube measuring 16 x 160 mm, used for mixing, heating and observing reactions in school and college laboratories. Although catalogued under the name Probe, this item is a test tube, and its plain straight mouth suits rubber or cork stoppers for experiments with delivery tubes or sealed samples. It comes from Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer that produces it at its own factory in Ambala, India.

Specifications

What Is the Rimless Test Tube (16 x 160 mm) Used For?

The 16 x 160 mm tube is a general-purpose size in school chemistry lab equipment for India: large enough for heating a few millilitres of liquid, testing gases with a glowing or burning splint, displacement and precipitation reactions, and indicator colour tests, yet easy to handle in a test tube holder.

Rimless tubes are easy to stopper: moisten the rubber stopper slightly and twist it in gently rather than forcing it. When heating, warm the tube near the surface of the liquid first and keep it moving in the flame to avoid sudden boiling.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this rimless test tube. The tube is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied directly to schools, colleges, institutions, dealers and importers.

Because the manufacturer handles quotations and repeat orders itself, buyers can match the same tube code term after term — ask us. See the ScienceLab profile for more about the company.

Related Laboratory Equipment

These items are often ordered with this test tube for chemistry practicals:

• Test Tube Stand — holds tubes upright during experiments
• Rubber Stoppers without Holes Of Different Diameters — seal the rimless mouth when storing samples
• Test Tube Holders — hold the tube safely over a flame
• Test Tube 12 x 100 mm — a smaller rimmed tube for spot tests
• Test Tube 25 x 200mm — a larger rimless tube for boiling bigger volumes

More test tubes and glassware are listed in the Laboratory Equipment category.

Frequently Asked Questions

Is the Probe (SCI-652/085) a test tube?
Yes. The item listed as Probe, code SCI-652/085, is an edgeless (rimless) borosilicate glass test tube measuring 16 x 160 mm. It is not a probing or dissecting instrument, despite the catalogue name.

What size and type of tube is the Probe?
The Probe (SCI-652/085) is a transparent, edgeless test tube measuring 16 x 160 mm. Its rimless mouth is straight and plain, which suits fitting a rubber or cork stopper for sealed samples or delivery tubes.

What material is the Probe test tube made from?
The Probe test tube is made of transparent borosilicate glass that is chemical resistant and heat resistant, so it can be heated over a flame and used with the reagents found in routine school and college experiments.

Who manufactures the Probe (16 x 160 mm test tube)?
Jain Scientific Equipments Pvt Ltd, known as ScienceLab, manufactures the Probe test tube as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and supplies it directly to buyers.

What should I state when ordering the Probe test tube?
When ordering the Probe, quote the code SCI-652/085 and the size 16 x 160 mm so it is not confused with other tube sizes, and give the quantity and delivery location through the contact page.

Can the Probe test tube be supplied in bulk for schools?
Yes. ScienceLab supplies the Probe (16 x 160 mm rimless test tube) in bulk to schools, colleges, dealers and importers across India and international markets. Send your quantity for a factory-direct quotation.

Request a Quote

To request a quotation for the Probe (16 x 160 mm test tube), use the contact page or add it to the enquiry cart. The quote is prepared directly by the manufacturer.

Last updated: 24 September 2026

Test Tube 25 x 200mm (Product Code: SCI-650/086) is a large rimless (edgeless) borosilicate glass test tube used for heating, boiling and reacting bigger volumes than ordinary test tubes can hold, in chemistry and biology laboratories. At 25 x 200 mm it is the size often called a boiling tube, with room inside for a thermometer, stirrer or delivery tube. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 25 x 200 mm Test Tube Used For?

Large test tubes are used to boil liquids with less risk of spurting, for cooling-curve and melting-point experiments with a thermometer inserted, to grow crystals, to prepare small quantities of gas with a stopper and delivery tube, and for demonstrations the whole class must see. Their width also makes them easier to fill and clean than narrow tubes.

As part of school chemistry lab equipment in India, the tube should be clamped on a laboratory stand for prolonged heating rather than held by hand. Fill it no more than about a third when boiling, and let it cool before washing.

OEM Manufacturer

This large test tube is made by Jain Scientific Equipments Private Limited, which trades under the ScienceLab name and acts as the OEM (original equipment manufacturer). Production is at the company's own licensed factory at Saha, Ambala, Haryana, India, and the tubes go out factory-direct to institutions, dealers and importers in India and international markets.

Replacement stock and repeat orders are arranged by the manufacturer itself — just ask us. The ScienceLab profile has more company information.

Related Laboratory Equipment

Heating and cooling-curve experiments in this large tube usually need:

• Laboratory Thermometers — inserted to follow temperature changes
• Rubber stoppers with holes of different diameters — carry a thermometer or delivery tube
• Laboratory Stand with Accessories — clamps the tube for prolonged heating
• Tube Brush — cleans the tube after use
• Test Tube 12 x 100 mm — a small rimmed tube for spot tests

Find more test tubes and apparatus in the Laboratory Equipment category.

Frequently Asked Questions

What size is the Test Tube 25 x 200mm?
The Test Tube 25 x 200mm (SCI-650/086) measures 25 x 200 mm and is edgeless, or rimless. This large size, often called a boiling tube, holds more liquid than standard test tubes and fits a thermometer inside.

What is the Test Tube 25 x 200mm made of?
The Test Tube 25 x 200mm is made of transparent borosilicate glass that is chemical resistant and heat resistant, suited to boiling liquids, heating solids and observing reactions clearly in teaching laboratories.

Why choose a rimless test tube of this size?
The Test Tube 25 x 200mm has a plain rimless mouth that takes a rubber stopper snugly, useful for fitting thermometers or delivery tubes. Its wide bore also makes filling, stirring and cleaning easier than with narrow tubes.

Who manufactures the Test Tube 25 x 200mm?
The Test Tube 25 x 200mm is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come directly from the manufacturer.

How should the Test Tube 25 x 200mm be heated?
Clamp the Test Tube 25 x 200mm on a laboratory stand, fill it no more than about a third, and heat it gently while pointing the mouth away from people. Allow it to cool before washing.

What should I send to get a quotation for these tubes?
For the Test Tube 25 x 200mm, send the code SCI-650/086, the quantity, any stoppers, thermometers or holders to include, and the delivery location through the contact page.

Request a Quote

Request a quotation for the Test Tube 25 x 200mm through the contact page or place it in the enquiry cart. The manufacturer issues the quote directly.

Last updated: 24 September 2026

Marked (Tarred) Pots (Product Code: SCI-647/087) is a graduated borosilicate glass pot used to hold, weigh and measure small quantities of solids and liquids in school and college chemistry laboratories. With a 100 ml capacity, clear walls and a corrugated cap, it suits students who weigh samples by difference and want to see the contents at a glance. This borosilicate glassware is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Marked Tarred Pot Used For?

In a practical class the 100 ml pot is first placed empty on a balance and that reading is noted as the tare. A sample is then added, and its mass is found by subtracting the tare from the new reading. The graduations give a quick visual check of volume when a liquid is poured in, though a pipette or measuring cylinder should be used whenever an exact volume matters.

Because the glass is chemical resistant, the pot can hold common laboratory solutions and dry reagents between the preparation and use stages of a lesson, with the corrugated cap keeping dust out. As part of a school chemistry lab glassware set it sits naturally beside beakers and flasks. Heat resistance allows warm liquids, but remove the cap before warming and avoid sudden temperature changes.

What to Specify When Ordering

• Capacity: this listing is the 100 ml pot; larger marked pots are listed separately (see Related Laboratory Equipment).
• Quantity: the number of pots needed per bench or student group.
• Closures: whether you also want extra corrugated caps for repeat use — ask us.
• Companion items: a balance and spatulas, if you are equipping a weighing station from scratch.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the OEM (original equipment manufacturer) of these Marked (Tarred) Pots. They are produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and dispatched factory-direct to schools, colleges, dealers and importers rather than through a trading intermediary. Matching pots for repeat orders are arranged by the manufacturer itself, so a lab can keep a uniform set over the years. Learn more on the ScienceLab company profile.

Related Laboratory Equipment

These items are used with the 100 ml pot when samples are weighed, transferred and stored during chemistry practicals.

• Marked (tarred) Pots 250 ml — the same style of pot for larger samples.
• Marked (Tarred) Pots (bottle) — a bottle-form listing in the same range.
• Semi-Analytical Scales with Weighing Stone Boxes — for weighing the pot empty and filled.
• Spoon Spatula — for moving powders and crystals into the pot.

See the complete Laboratory Equipment range for more glassware and bench items.

Frequently Asked Questions

What is the capacity of the Marked (Tarred) Pots?
The Marked (Tarred) Pots under code SCI-647/087 hold 100 ml. They are made of clear borosilicate glass with graduated walls, so students can see the contents and read an approximate fill level without opening the corrugated cap.

What does "tarred" mean in the name?
"Tarred" in Marked (Tarred) Pots refers to taring: weighing the empty pot first and recording that value, so the mass of anything added later is found by subtraction. Many balances also have a tare button that zeroes the display with the empty pot in place.

Can the Marked (Tarred) Pots be heated?
The Marked (Tarred) Pots are heat-resistant borosilicate glass, so they cope with warm liquids used in routine practicals. Take off the corrugated cap before warming, heat gradually, and do not set a hot pot on a cold or wet surface, because sudden temperature changes can still crack glass.

Who manufactures the Marked (Tarred) Pots?
The Marked (Tarred) Pots are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its licensed factory at Saha, Ambala, Haryana, India. Buyers deal directly with the manufacturer for quotations, repeat orders and questions about matching caps.

Is a calibration certificate available for the graduations?
Calibration-certificate availability for the Marked (Tarred) Pots should be discussed with us before you order. The graduations are meant for quick volume checks rather than exact measurement; raise any documentation needs through the ScienceLab contact page.

What should a quotation request include?
A quotation request for the Marked (Tarred) Pots should give the code SCI-647/087, the 100 ml size, the number of pots and the delivery location. Schools, dealers and importers buying for India and international markets can list every item in one enquiry.

Request a Quote

To order the Marked (Tarred) Pots, send your quantity and delivery details through the contact page or add the item to the enquiry cart. Quotations come direct from the manufacturer in Ambala.

Last updated: 24 September 2026

Marked (tarred) Pots 250 ml (Product Code: SCI-643/088) is a mid-sized graduated borosilicate glass container used to weigh, prepare and briefly hold solutions and dry samples in teaching and routine laboratories. Its 250 ml capacity leaves room for a working solution shared by a class, while the clear glass and corrugated cap keep the contents visible and covered. This chemistry lab glassware is produced by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 250 ml Tarred Pot Used For?

Teachers often use this pot to make up the working solution for a single practical. The empty pot is tared on a balance, the solid is weighed straight into it, and water is added up to the graduation required. As groups draw from it, the marks show at a glance how much solution is left.

The chemical-resistant body copes with the aqueous reagents common in school practicals, and its heat resistance lets you pour in a freshly made, still-warm solution. Label each pot with its contents, keep the cap closed between sessions and rinse with distilled water before changing reagents. When a standard solution of exact concentration is needed, finish it in a volumetric flask rather than relying on the graduations.

What to Specify When Ordering

• Size: 250 ml for code SCI-643/088; other capacities in the range are separate listings.
• Quantity: how many pots each lab or practical group needs.
• Consolidation: any other glassware you want quoted and dispatched in the same consignment.

OEM Manufacturer

ScienceLab is the trade name of Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), the OEM behind this 250 ml marked pot. Production takes place at the company's licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala, Haryana (Factory Licence AMB-ONLINE-CHD-J-414), and orders go out factory-direct to institutions, dealers and importers. Dealing with the maker gives buyers one point of contact for quotations, dispatch and later follow-on orders. Background on the company is on the ScienceLab profile page.

Related Laboratory Equipment

These items pair with the 250 ml pot when solutions are measured out, mixed and shared during a practical.

• Marked (Tarred) Pots — a smaller pot for weighing small samples.
• Marked (tarred) Pots 500 ml — the next size up for larger batches.
• Measuring Cylinder 250 ml — for measuring the water added more closely.
• Chemical Beaker 250 ml — for dissolving or warming before transfer.
• Marked (Taruar) Jars 250 ml — an alternative listing of similar capacity.

Explore more items in the Laboratory Equipment category.

Frequently Asked Questions

What capacity is the Marked (tarred) Pots 250 ml?
The Marked (tarred) Pots 250 ml, code SCI-643/088, holds 250 ml and has graduated walls of clear borosilicate glass. That volume suits a working solution shared by several student groups while the pot stays easy to handle at the bench.

Can solutions be prepared directly in this marked pot?
Yes, the Marked (tarred) Pots 250 ml can be used to prepare working solutions: tare it, weigh the solid in, then add water. Its graduations are approximate, so make up standard solutions of exact concentration in a volumetric flask.

What closure does the 250 ml pot have?
The Marked (tarred) Pots 250 ml comes with a corrugated cap that covers the contents between lessons and keeps dust out. Leave the cap off while the pot or its contents are warm, and replace it once everything has cooled to room temperature.

Who manufactures the Marked (tarred) Pots 250 ml?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Marked (tarred) Pots 250 ml as the OEM at its licensed factory in Saha, Ambala, Haryana, India. Quotations, dispatch and repeat orders are handled directly by the manufacturer, not a trading agent.

How should the pot be cleaned after use?
Clean the Marked (tarred) Pots 250 ml by rinsing out residues promptly, washing with a mild laboratory detergent and a soft brush, then rinsing with tap water and finally distilled water. Let it air-dry upside down before refitting the cap.

Is a calibration certificate supplied with it?
Whether a calibration certificate can accompany the Marked (tarred) Pots 250 ml should be discussed with us at the enquiry stage. State the requirement clearly through the ScienceLab contact page so it is considered when your quotation is prepared.

Can it be ordered in bulk or for export?
Yes, the Marked (tarred) Pots 250 ml can be quoted in bulk for schools, colleges, dealers and importers in India and international markets. Share the quantity, destination and any other glassware needed so one consolidated quotation can be prepared.

Request a Quote

For a price on the Marked (tarred) Pots 250 ml, write to us through the contact page or place it in the enquiry cart with your other items. Your quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Marked (tarred) Pots 500 ml (Product Code: SCI-640/089) is a graduated borosilicate glass pot used to prepare and hold larger batches of solutions or samples in school, college and training laboratories. At 500 ml it carries enough stock solution for a full class or several practical sessions, with clear glass for visibility and a corrugated cap to cover the contents. It is laboratory glassware made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 500 ml Marked Pot Used For?

The 500 ml size is chosen when one batch has to serve a whole class. A lab assistant can weigh the solute into the tared pot, dissolve it and bring the level to the graduation needed before the lesson begins. It is equally handy for collecting water samples in environmental practicals, where the graduations give a rough volume record at the point of collection.

A full 500 ml pot is much heavier than the smaller sizes, so confirm that your balance's maximum load covers the pot plus its contents before weighing by difference, and support the base when carrying it. Chemical resistance suits most routine reagents, and heat resistance tolerates warm solutions, but keep the cap off until the contents have cooled.

What to Specify When Ordering

• Capacity: 500 ml under code SCI-640/089; smaller and larger marked pots are separate listings.
• Number of pots: labs often keep one pot per stock reagent, plus spares.
• Other items: any measuring cylinders or beakers you want quoted in the same order.

OEM Manufacturer

ScienceLab is the trading name used by Jain Scientific Equipments Private Limited, the OEM for the Marked (tarred) Pots 500 ml. Each pot is manufactured at the company's licensed factory in Saha, Ambala, Haryana, India, and sold directly by the maker to educational institutions, laboratories, distributors and importers. Buying from the manufacturer keeps the pattern consistent when a school adds more pots in later years. Read about the company on the ScienceLab profile.

Related Laboratory Equipment

Buyers equipping a solution-preparation bench usually choose these alongside the 500 ml pot.

• Marked (tarred) Pots 250 ml — a smaller pot for single-group quantities.
• Marked (tarred) Pots 1000 ml — the largest listing in this series.
• Measuring Cylinder 500 ml — for measuring water volumes more closely than the pot graduations.
• Chemical Beaker 500 ml — for dissolving and stirring before transfer.
• Hydrated Copper Sulfate 500 g — a typical solid weighed out for class solutions.

More bench glassware is listed in the Laboratory Equipment category.

Frequently Asked Questions

How much does the Marked (tarred) Pots 500 ml hold?
The Marked (tarred) Pots 500 ml, code SCI-640/089, holds 500 ml. It is graduated clear borosilicate glass with a corrugated cap, sized for stock or working solutions that need to last a whole class or several practical sessions.

Will the 500 ml pot fit on a school balance?
The Marked (tarred) Pots 500 ml can be weighed on most bench balances, but the pot plus a full load of liquid adds up quickly. Check your balance's maximum capacity first, and weigh solids into the pot before adding water.

Is the 500 ml pot suitable for holding reagents?
The Marked (tarred) Pots 500 ml is chemical-resistant borosilicate glass, so it can hold most routine laboratory reagents for a session or between lessons. Label it clearly, keep the corrugated cap closed, and store it away from direct sunlight and heat sources.

Who manufactures the Marked (tarred) Pots 500 ml?
The Marked (tarred) Pots 500 ml is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Enquiries, quotations and repeat orders are handled factory-direct by the maker.

Can a calibration certificate be provided?
A calibration certificate for the Marked (tarred) Pots 500 ml is something to discuss with us before ordering, as its graduations are intended for approximate readings. Mention the requirement through the contact page and it will be addressed in our reply.

What information does a quotation need?
To quote the Marked (tarred) Pots 500 ml we need the code SCI-640/089, the number of pots, the delivery address or port, and any other items you want in the same shipment within India or to international markets.

Request a Quote

Ask for pricing on the Marked (tarred) Pots 500 ml through our contact form, or add it to the enquiry cart together with the rest of your list. Quotes are issued directly by the manufacturer.

Last updated: 24 September 2026

Marked (tarred) Pots 1000 ml (Product Code: SCI-638/090) is a litre-size transparent borosilicate glass tare vessel used to make up and hold bulk quantities of solutions in school, college and institutional laboratories. It closes with a sanded cap and is chosen when a full day of practicals draws on one shared stock. This borosilicate glassware is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the 1000 ml Tarred Pot Used For?

Laboratories use this pot for litre-scale batches: a technician tares the empty vessel, weighs in the solute and makes the solution up before the first class, so every group draws from the same stock. It also works as a clean reservoir for distilled or rinse water on a busy bench. Because the listing for this size does not mention graduations, measure volumes with a measuring cylinder or volumetric flask.

Borosilicate glass resists heat and most routine chemicals, which is why it is preferred for chemistry lab glassware that is washed and reused for years. Keep the sanded cap and the rim clean and dry, because grit on a ground surface can make a cap stick. Lift the full vessel by its body, never by the cap.

What to Specify When Ordering

• Capacity: 1000 ml under code SCI-638/090; smaller marked pots are separate listings.
• Graduations: if you need volume marks at this size, say so in your enquiry so we can confirm what applies.
• Quantity: the number of litre-size stock vessels each lab needs.

OEM Manufacturer

Jain Scientific Equipments Private Limited operates under the ScienceLab name and is the OEM (original equipment manufacturer) of the Marked (tarred) Pots 1000 ml. The vessel is made at the company's licensed factory in Saha, Ambala, Haryana, India, rather than bought in from a trader, and ships direct to schools, colleges, dealers and importers. Questions about replacement caps or matching vessels go straight to the people who make them, so just ask us. More about the company is on the ScienceLab profile page.

Related Laboratory Equipment

For litre-scale solution work, these items complete the bench.

• Marked (tarred) Pots 500 ml — the half-size version for smaller batches.
• Measuring Cylinder 1000 ml — for measuring litre volumes before pouring into the pot.
• Chemical Beaker 1000 ml — for dissolving larger amounts of solid.
• Conical Jar (Erlenmeyer) 1000 ml — for swirling and mixing large volumes.
• Distiller for Distilled Water — a source of water for making up stock.

The wider Laboratory Equipment range lists further glassware and accessories.

Frequently Asked Questions

What capacity and material is the Marked (tarred) Pots 1000 ml?
The Marked (tarred) Pots 1000 ml, code SCI-638/090, holds 1000 ml and is made of transparent borosilicate glass that is heat resistant and chemical resistant. It closes with a sanded cap and is the litre-size option among the marked pots.

Is the 1000 ml pot graduated?
Graduations are not listed for the Marked (tarred) Pots 1000 ml, unlike the smaller pots in the range. If your practical needs volume marks at this size, mention it in your enquiry so we can confirm what the quoted vessel carries.

How should the sanded cap be looked after?
Keep the sanded cap of the Marked (tarred) Pots 1000 ml clean and dry, and wipe the rim before closing, because solid residue on a ground surface can make the cap stick. Store the pot with the cap resting loosely in place rather than forced down.

Who manufactures the Marked (tarred) Pots 1000 ml?
The Marked (tarred) Pots 1000 ml is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), acting as OEM, at its licensed factory at Saha, Ambala, Haryana, India. Quotations and after-sales questions go straight to the manufacturer.

Can it be used to hold distilled water?
Yes, the Marked (tarred) Pots 1000 ml can serve as a bench reservoir for distilled or rinse water, because its borosilicate glass is chemical resistant and transparent. Rinse it with distilled water before first use and keep it capped to limit dust.

What should a quotation request include?
When requesting a quote for the Marked (tarred) Pots 1000 ml, include code SCI-638/090, the quantity, whether graduations are needed and the delivery location. Institutions and importers in India and international markets can combine it with other glassware in one enquiry.

Request a Quote

Send your requirement for the Marked (tarred) Pots 1000 ml via the ScienceLab contact page or collect items in the enquiry cart and submit them together. The manufacturer replies with the quotation directly.

Last updated: 24 September 2026

Distillation Pot with Side Tube (Product Code: SCI-633/092) is a 250 ml borosilicate glass distillation flask used to boil a liquid mixture and lead its vapour to a condenser in chemistry practicals. Its 175 mm side tube and narrow mouth make it the central vessel of a simple distillation set-up in schools, colleges and training labs. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Distillation Pot Used For?

In a simple distillation practical the pot is clamped on a retort stand over a heat source, filled only part-way with the mixture, and closed at the neck with a stopper carrying a thermometer. The 175 mm side tube is connected to a Liebig condenser, so the vapour condenses and the distillate runs into a receiver.

Typical school experiments include recovering water from a salt or ink solution and showing that a pure liquid boils at a steady temperature. As part of a laboratory distillation apparatus, the borosilicate body tolerates heating through a wire gauze and resists the liquids being distilled. Add a few anti-bumping granules before heating and never distil to dryness.

What to Specify When Ordering

• Flask: 250 ml with 175 mm side tube (code SCI-633/092).
• Condenser and tubing: whether a matching condenser and rubber tubing should be quoted too.
• Support: retort stands and clamps for each set-up.
• Quantity: the number of distillation set-ups per laboratory.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM manufacturer of the Distillation Pot with Side Tube. The flask is produced at the company's licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, laboratories, dealers and importers. Because the pot and its companion glassware can be quoted by one maker, a complete distillation bench can be put together from a single source. Learn more on the ScienceLab company profile.

Related Laboratory Equipment

A working distillation set-up needs these items alongside the side-tube pot.

• Right Refrigerant — the straight Liebig-type condenser that takes the vapour from the side tube.
• Liebig Condenser — an alternative condenser listing.
• Rubber Tube (Laboratory) — for the cooling-water connections.
• Retort Stand — to clamp the pot securely over the heat source.
• Gauze Wire — spreads burner heat evenly under the flask.

Other glassware and stands are listed under Laboratory Equipment.

Frequently Asked Questions

What size is the Distillation Pot with Side Tube?
The Distillation Pot with Side Tube, code SCI-633/092, has a capacity of 250 ml and a side tube 175 mm long. It is transparent borosilicate glass with a narrow mouth, suited to bench-scale simple distillation in teaching laboratories.

Which condenser connects to the side tube?
The Distillation Pot with Side Tube is normally connected to a straight Liebig condenser, either directly or through a short piece of tubing. Tell us which condenser you already use so that compatibility can be confirmed when we prepare your quotation.

How can the distillation pot be heated?
The Distillation Pot with Side Tube is heat-resistant borosilicate glass and can be warmed over a burner through wire gauze, on a heating mantle or in a water bath. Heat gradually, use anti-bumping granules and never let the flask boil dry.

What goes into the narrow mouth?
The narrow mouth of the Distillation Pot with Side Tube takes a stopper, usually bored for a thermometer whose bulb sits level with the side tube to read the vapour temperature. Stoppers and thermometers are not listed as part of this item, so ask us to include them.

Who manufactures the Distillation Pot with Side Tube?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Distillation Pot with Side Tube as the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders are handled directly by the manufacturer.

Can it be ordered in quantity for several labs?
Yes, the Distillation Pot with Side Tube can be quoted in quantity for schools, colleges, dealers and importers in India and international markets. State the number of set-ups, the delivery location and any condensers or stands to include.

Request a Quote

Request pricing for the Distillation Pot with Side Tube through the contact page, or add it and the rest of your distillation set to the enquiry cart. You receive the quotation directly from the manufacturer.

Last updated: 24 September 2026