- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
103.jpg)
Bottom Flat Pot (Balloons With Flat Bottom) 100 ml
Bottom Flat Pot (Balloons With Flat Bottom) 100 ml (Product Code: SCI-670/076) is a 100 ml flat bottom flask of borosilicate glass used to hold, mix and gently heat small volumes of liquid on a laboratory bench. Unlike a round bottom flask, its flat base stands upright without support, and the long neck accepts a stopper for simple gas-preparation or storage set-ups in school chemistry. Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, makes this flask at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Flat bottom flask |
| Capacity | 100 ml |
| Material | Borosilicate glass |
| Base | Flat |
| Neck | Long |
| Colour | Transparent |
| Properties | Chemical resistant, heat resistant |
| Product code | SCI-670/076 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 100 ml Flat Bottom Flask Used For?
As a basic item of chemistry lab equipment for schools in India, the 100 ml flat bottom flask is used to prepare small batches of solution, warm liquids over a spirit lamp or burner, demonstrate gas generation with a stoppered delivery tube, and keep samples covered on the bench between steps of an experiment.
Heat flat-bottomed glassware gently and evenly, because a flat base is less suited than a rounded one to strong or prolonged heating. Always place a wire gauze or ceramic mesh between the flame and the glass.
OEM Manufacturer
ScienceLab is the trading name of Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), the OEM (original equipment manufacturer) of this flat bottom flask. Production takes place at the company's own licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala, Haryana (Factory Licence AMB-ONLINE-CHD-J-414).
The flask is supplied factory-direct to schools, colleges, dealers and importers, and replacement flasks or repeat orders are handled by the manufacturer itself — ask us. Visit the ScienceLab profile for company details.
Related Laboratory Equipment
Small-scale heating and gas-preparation work with this flask usually calls for these items too:
- Ceramic Mesh Square — spreads burner heat evenly under the flat base
- Alcohol Lamp 150 ml — a gentle heat source for small volumes
- Rubber stoppers with holes of different diameters — hold a delivery tube in the neck for gas preparation
- Flat Bottom Pot (Balloons with flat bottom) 250 ml — the next size up for larger volumes
Find more school chemistry apparatus in the Laboratory Equipment category.
Frequently Asked Questions
Can the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml stand on its own?
Yes. The Bottom Flat Pot (Balloons With Flat Bottom) 100 ml has a flat base, so it stands upright on a bench, tripod or hot plate without a clamp, which makes filling and observing small samples easier for students.
What is the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml made of?
The Bottom Flat Pot (Balloons With Flat Bottom) 100 ml is made of transparent borosilicate glass that is chemical resistant and heat resistant, so reactions stay visible and the flask copes with routine warming and washing.
Can the 100 ml flat bottom flask be heated over a flame?
The Bottom Flat Pot (Balloons With Flat Bottom) 100 ml can be warmed over a burner or spirit lamp with a wire gauze or ceramic mesh underneath. Heat it gently and evenly; a round bottom flask is preferable for strong, prolonged heating.
Who manufactures the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml?
Jain Scientific Equipments Pvt Ltd, known as ScienceLab, is the OEM manufacturer of the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml, producing it at its own licensed factory at Saha, Ambala, Haryana, India.
Is a stopper included with the 100 ml flat bottom flask?
The listing for the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml (SCI-670/076) covers the flask only. Rubber stoppers with or without holes are listed separately and can be added to the same quotation on request.
What information does a quotation for this flask need?
For a quotation on the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml, send the code SCI-670/076, the number of flasks, any stoppers or heating accessories required, and the delivery address in India or abroad.
Request a Quote
Get a quotation for the Bottom Flat Pot (Balloons With Flat Bottom) 100 ml through our contact page, or add it to the enquiry cart with other items. Quotations are issued directly by the manufacturer.
Last updated: 24 September 2026
776.jpg)
Flat Bottom Pot (Balloons with flat bottom) 250 ml
Flat Bottom Pot (Balloons with flat bottom) 250 ml (Product Code: SCI-675/077) is a 250 ml borosilicate glass flat bottom flask used to prepare, boil and hold liquids in chemistry and biology laboratories. Its mid-size capacity and long neck suit class demonstrations such as boiling water, dissolving solids and generating gases, while the flat base sits steady on a bench or tripod. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of borosilicate glassware in India, at its own factory in Ambala.
Specifications
| Parameter | Detail |
|---|---|
| Type | Flat bottom flask |
| Capacity | 250 ml |
| Glass | Borosilicate |
| Base | Flat |
| Neck | Long |
| Appearance | Transparent |
| Resistance | Chemical resistant and heat resistant |
| Product code | SCI-675/077 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 250 ml Flat Bottom Flask Used For?
Teachers use the 250 ml flat bottom flask to demonstrate boiling and condensation, and to prepare gases such as hydrogen or carbon dioxide by fitting a thistle funnel and delivery tube through a two-hole stopper. It is also a convenient vessel for making up a working solution for one class.
In biology laboratories the flask is handy for preparing staining solutions or holding distilled water near the microscope bench. When heating, use a hot plate or a burner with wire gauze on a tripod, and let the glass cool before washing.
OEM Manufacturer
Jain Scientific Equipments Private Limited operates under the ScienceLab brand and is the OEM (original equipment manufacturer) of this 250 ml flat bottom flask. The flask is produced at the company's own licensed factory in Saha, Ambala, Haryana, India.
Buying from the manufacturer gives schools, colleges, dealers and importers one point of contact for quotations, supply and repeat orders. The ScienceLab profile explains more about the company.
Related Laboratory Equipment
Gas-preparation and heating experiments with this flask are usually assembled from these items:
- Rubber stoppers with holes of different diameters — two-hole stoppers for thistle funnels and delivery tubes
- Glass Pipes of Different Diameters — glass tubing for making delivery tubes
- Bunsen Burner — heat source when used with wire gauze
- Tripod Stand 200mm — supports the flask above the burner
- Bottom flat pot (Balloons with flat bottom) 500 ml — a larger flat bottom flask for bigger batches
The full Laboratory Equipment category lists more flasks, stands and accessories.
Frequently Asked Questions
What capacity and neck does the Flat Bottom Pot (Balloons with flat bottom) 250 ml have?
The Flat Bottom Pot (Balloons with flat bottom) 250 ml (SCI-675/077) holds 250 ml and has a long neck, which gives room for a stopper, thistle funnel or delivery tube in gas-preparation experiments.
Which glass is used for the Flat Bottom Pot (Balloons with flat bottom) 250 ml?
The Flat Bottom Pot (Balloons with flat bottom) 250 ml is made from transparent borosilicate glass that is chemical resistant and heat resistant, so students can watch reactions clearly and the flask tolerates routine heating and cleaning.
Can the 250 ml flat bottom flask be used for preparing gases?
Yes. Fitted with a two-hole rubber stopper, thistle funnel and delivery tube, the Flat Bottom Pot (Balloons with flat bottom) 250 ml works as a gas generator for classroom preparations. Stoppers and tubing are separate items that can be quoted together.
Who manufactures the Flat Bottom Pot (Balloons with flat bottom) 250 ml?
The Flat Bottom Pot (Balloons with flat bottom) 250 ml is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and is supplied directly by the manufacturer.
How should the 250 ml flat bottom flask be heated?
Heat the Flat Bottom Pot (Balloons with flat bottom) 250 ml on a hot plate or over a burner with wire gauze on a tripod, raising the temperature gently. Its heat-resistant borosilicate glass handles routine warming and boiling in teaching labs.
Do you supply this flask in bulk for schools and dealers?
Yes. ScienceLab supplies the Flat Bottom Pot (Balloons with flat bottom) 250 ml in bulk to schools, colleges, dealers and importers in India and international markets. Share quantities and the delivery location through the contact page.
Request a Quote
To get a quotation for the Flat Bottom Pot (Balloons with flat bottom) 250 ml, write to us via the contact page or add it to the enquiry cart. The quotation is sent directly by the manufacturer.
Last updated: 24 September 2026
675.jpg)
Bottom flat pot (Balloons with flat bottom) 500 ml
Bottom flat pot (Balloons with flat bottom) 500 ml (Product Code: SCI-672/078) is a 500 ml flat bottom flask in borosilicate glass used to prepare and hold larger volumes of solutions, distilled water and reagents on the laboratory bench. Technicians preparing class reagents rely on it because the flat base stands securely when full and the long neck limits splashing during swirling. The flask is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of school lab glassware, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Flat bottom flask |
| Capacity | 500 ml |
| Material | Borosilicate glass |
| Base | Flat |
| Neck | Long |
| Colour | Transparent |
| Properties | Chemical resistant, heat resistant |
| Product code | SCI-672/078 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 500 ml Flat Bottom Flask Used For?
Within school chemistry lab equipment in India, the 500 ml flat bottom flask is mainly a preparation and holding vessel: making up stock solutions before they are shared among student groups, boiling larger quantities of water, dissolving salts for crystallisation work, and keeping prepared liquids stoppered during a practical session.
It can also act as the boiling vessel for simple distillation or gas-generation demonstrations in front of the whole class. Label the flask with its contents and date, and warm it gradually on a hot plate or over gauze rather than in a direct flame.
OEM Manufacturer
Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM (original equipment manufacturer) of this 500 ml flat bottom flask and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Schools, institutions, dealers and importers are supplied factory-direct, without a trading layer in between.
If a flask breaks or you need the same item next term, the manufacturer handles replacements and repeat orders — ask us. Learn more on the ScienceLab company profile.
Related Laboratory Equipment
Preparing and holding class-sized batches of solution in this flask often goes with:
- Measuring Cylinder 500 ml — measures the volume before filling the flask
- Glass Stirrer (Agitator) — stirs solids into solution
- Rubber Stoppers without Holes Of Different Diameters — close the neck for short-term storage
- Glass Bottle, for Liquid Reagents — longer-term storage for prepared solutions
- Flat Bottom Pot (Balloons with Flat Bottom) 1000ml — a bigger flat bottom flask for bulk batches
Browse the Laboratory Equipment category for more glassware in matching sizes.
Frequently Asked Questions
What is the capacity of the Bottom flat pot (Balloons with flat bottom) 500 ml?
The Bottom flat pot (Balloons with flat bottom) 500 ml, code SCI-672/078, holds 500 ml. That capacity suits class-sized batches of solution or distilled water that are later shared among several student groups.
What material and properties does the 500 ml flat bottom flask have?
The Bottom flat pot (Balloons with flat bottom) 500 ml is made of transparent borosilicate glass. It is listed as chemical resistant and heat resistant, with a flat base and a long neck for steady handling and swirling.
Is the 500 ml flat bottom flask suitable for storing solutions?
The Bottom flat pot (Balloons with flat bottom) 500 ml can hold prepared solutions for a practical session when closed with a rubber stopper. For longer storage, transfer the solution to a labelled reagent bottle.
Who manufactures the Bottom flat pot (Balloons with flat bottom) 500 ml?
The OEM manufacturer of the Bottom flat pot (Balloons with flat bottom) 500 ml is Jain Scientific Equipments Pvt Ltd (ScienceLab), which makes it at its own licensed factory at Saha, Ambala, Haryana, India.
What should a quotation request for this flask contain?
For the Bottom flat pot (Balloons with flat bottom) 500 ml, send the code SCI-672/078, the number of flasks, any stoppers or matching cylinders to include, and the delivery location. The manufacturer then prepares your quotation.
Can the 500 ml flat bottom flask be supplied to overseas buyers?
Yes. ScienceLab supplies the Bottom flat pot (Balloons with flat bottom) 500 ml to buyers in India and international markets, including dealers and importers. Send your requirement through the contact page to start a quotation.
Request a Quote
Enquire about the Bottom flat pot (Balloons with flat bottom) 500 ml through the contact page or the enquiry cart. Every quotation is issued directly by the manufacturer.
Last updated: 24 September 2026
Conical Jar (Erlenmeyer) 50ml
Conical Jar (Erlenmeyer) 50ml (Product Code: SCI-669/079) is a 50 ml graduated conical flask of borosilicate glass used for micro-scale titrations and for mixing and heating small volumes in chemistry and biology laboratories. Its narrow mouth and sloping sides let students swirl a mixture briskly without spilling, and the graduations show an approximate volume at a glance. This conical flask for schools in India is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala.
Specifications
| Parameter | Detail |
|---|---|
| Type | Conical (Erlenmeyer) flask |
| Capacity | 50 ml |
| Graduations | Graduated |
| Material | Borosilicate glass |
| Mouth | Narrow |
| Properties | Chemical resistant, heat resistant |
| Product code | SCI-669/079 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 50 ml Conical Flask Used For?
The 50 ml size is chosen when reagents are costly or when students work at micro scale: titrating small aliquots with a microburette, checking solubility, incubating small liquid samples, or heating a few millilitres on a hot plate. Less liquid also means less waste to neutralise after the class.
Graduation marks on a conical flask give an approximate volume only; for accurate amounts, measure with a pipette or measuring cylinder and use the flask as the reaction vessel. The narrow mouth accepts a small stopper or a cotton-wool plug when the contents must be covered.
OEM Manufacturer
Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, is the OEM (original equipment manufacturer) of this 50 ml Erlenmeyer flask. It is manufactured at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied directly to schools, colleges and institutions as well as dealers and importers.
Because you deal with the maker, questions about matching sizes, replacements and repeat orders go straight to the people who produce the flask — ask us. The ScienceLab profile has more about the company.
Related Laboratory Equipment
Micro-scale titration and small-volume work with this flask pairs well with:
- Microbureta — dispenses titrant in small, controlled volumes
- Measuring Cylinder 50ml — measures liquids accurately before transfer
- Chemical Beaker 50ml — an open vessel for small-volume mixing
- Conical Jar (Erlenmeyer) 100 ml — the next size up for standard titrations
More sizes and related glassware are in the Laboratory Equipment category.
Frequently Asked Questions
What size is the Conical Jar (Erlenmeyer) 50ml?
The Conical Jar (Erlenmeyer) 50ml, code SCI-669/079, has a capacity of 50 ml with graduations and a narrow mouth. It is intended for micro-scale titrations and small-volume mixing or heating in teaching laboratories.
Are the graduations on the Conical Jar (Erlenmeyer) 50ml accurate enough for measuring?
The graduations on the Conical Jar (Erlenmeyer) 50ml are a quick volume guide. For accurate measurement, use a pipette, burette or measuring cylinder and treat the flask as the reaction or mixing vessel.
What is the Conical Jar (Erlenmeyer) 50ml made of?
The Conical Jar (Erlenmeyer) 50ml is made of borosilicate glass that is chemical resistant and heat resistant, so it can be warmed on a hot plate and used with the reagents common in school and college chemistry practicals.
Who manufactures the Conical Jar (Erlenmeyer) 50ml?
Jain Scientific Equipments Pvt Ltd (ScienceLab) manufactures the Conical Jar (Erlenmeyer) 50ml as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and supplies it directly to institutions, dealers and importers.
Why does the Conical Jar (Erlenmeyer) 50ml have a narrow mouth?
The narrow mouth of the Conical Jar (Erlenmeyer) 50ml reduces splashing and evaporation while the contents are swirled, and it takes a small stopper or cotton-wool plug. This makes the flask practical for titrations and covered samples.
What do I need to send for a quotation on this 50 ml flask?
For the Conical Jar (Erlenmeyer) 50ml, send the code SCI-669/079, the quantity, any other conical flask sizes you want quoted, and the delivery location. Use the contact page and the manufacturer will reply.
Request a Quote
Request a quotation for the Conical Jar (Erlenmeyer) 50ml through the contact page or add it to your enquiry cart. The quotation is prepared by the manufacturer itself.
Last updated: 24 September 2026
 100 ml956.jpg)
Conical Jar (Erlenmeyer) 100 ml
Conical Jar (Erlenmeyer) 100 ml (Product Code: SCI-667/080) is a graduated 100 ml Erlenmeyer flask made of borosilicate glass, used as the titration flask in acid-base and redox volumetric analysis in school and college laboratories. The 100 ml capacity holds a pipetted aliquot, indicator and titrant with room to swirl, while the narrow mouth keeps drops from splashing out beneath the burette tip. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer based in India, at its own factory in Ambala.
Specifications
| Parameter | Detail |
|---|---|
| Type | Erlenmeyer (conical) flask |
| Capacity | 100 ml |
| Graduations | Graduated |
| Material | Borosilicate glass |
| Mouth | Narrow |
| Chemical resistance | Chemical resistant |
| Heat resistance | Heat resistant |
| Product code | SCI-667/080 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 100 ml Erlenmeyer Flask Used For?
In a typical titration practical, an aliquot of the unknown solution is pipetted into the 100 ml Erlenmeyer flask and a few drops of indicator are added. Titrant is then run in from the burette while the flask is swirled over a white tile until the colour changes. The same flask is useful for dissolving weighed samples before analysis and for small heating tasks on a hot plate.
As a core item in any volumetric analysis kit for Indian school labs, the flask should be rinsed with distilled water only — not with the sample — before each titration. Water left inside does not change the amount of analyte pipetted in.
OEM Manufacturer
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, a registered MSME manufacturer (Udyam UDYAM-HR-01-0003714) and the OEM (original equipment manufacturer) of this Erlenmeyer flask. The flask is made at the company's own licensed factory at Saha, Ambala, Haryana, India.
Export shipments are handled under Importer-Exporter Code AAECJ8618A (DGFT), so dealers and importers abroad receive the same factory-direct supply as Indian schools and colleges. Ask us about repeat orders, and read more on the ScienceLab profile.
Related Laboratory Equipment
A titration station built around this flask normally also includes:
- Burette for Bases 25 ml — delivers titrant drop by drop into the flask
- Pipettes (Tubes) 10ml — transfers a measured aliquot into the flask
- Laboratory Stand with Accessories — holds the burette above the flask
- Conical Jar (Erlenmeyer) 250 ml — a larger flask for bigger aliquots or dissolving samples
See more titration glassware in the Laboratory Equipment category.
Frequently Asked Questions
Is the Conical Jar (Erlenmeyer) 100 ml suitable for titrations?
Yes. The Conical Jar (Erlenmeyer) 100 ml is sized for titration practicals: it holds a pipetted aliquot, indicator and titrant with space to swirl, and its narrow mouth limits splashing beneath the burette tip.
What are the specifications of the Conical Jar (Erlenmeyer) 100 ml?
The Conical Jar (Erlenmeyer) 100 ml (SCI-667/080) is a graduated conical flask of borosilicate glass with a 100 ml capacity and a narrow mouth. The glass is described as both chemical resistant and heat resistant.
Can the Conical Jar (Erlenmeyer) 100 ml be heated?
Yes. The Conical Jar (Erlenmeyer) 100 ml is made of heat-resistant borosilicate glass, so it can be warmed on a hot plate or over a burner with wire gauze, for example to dissolve a sample before titration. Heat it gradually.
Who manufactures the Conical Jar (Erlenmeyer) 100 ml?
The Conical Jar (Erlenmeyer) 100 ml is manufactured by Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, as the OEM at its own licensed factory at Saha, Ambala, Haryana, India. Quotations come directly from the company.
Is a calibration certificate available for the Conical Jar (Erlenmeyer) 100 ml?
The Conical Jar (Erlenmeyer) 100 ml has graduations for approximate volumes. If your laboratory needs a calibration certificate, please discuss availability with us through the contact page before placing the order.
What should I include in a quotation request for this flask?
When asking for a quote on the Conical Jar (Erlenmeyer) 100 ml, include the code SCI-667/080, the quantity per lab, any burettes or pipettes to be quoted with it, and the delivery location in India or abroad.
Request a Quote
To order the Conical Jar (Erlenmeyer) 100 ml, send your quantities through the contact page or use the enquiry cart. You will receive the quotation directly from the manufacturer.
Last updated: 24 September 2026
 250 ml747.jpg)
Conical Jar (Erlenmeyer) 250 ml
Conical Jar (Erlenmeyer) 250 ml (Product Code: SCI-665/081) is a 250 ml graduated conical flask of borosilicate glass used for mixing, heating, dissolving and filtering liquids in general chemistry, biology and microbiology work. This general-purpose capacity handles recrystallisation, larger titration aliquots and collecting filtrate beneath a funnel, and the narrow mouth takes a stopper or cotton plug. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of chemistry lab glassware in India, at its own factory in Ambala.
Specifications
| Parameter | Detail |
|---|---|
| Type | Conical flask (Erlenmeyer pattern) |
| Capacity | 250 ml |
| Graduations | Graduated |
| Glass | Borosilicate |
| Mouth | Narrow |
| Resistance | Chemical and heat resistant |
| Product code | SCI-665/081 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 250 ml Conical Flask Used For?
Common tasks include recrystallising a solid (dissolve it hot, then let it cool slowly in the flask), collecting filtrate from a glass funnel resting in the narrow mouth, preparing broths or media in microbiology, and swirling reaction mixtures that would splash out of a beaker.
When heating the 250 ml conical flask on a hot plate, leave the neck unstoppered so pressure cannot build up, and handle the warm flask with tongs or a heat-resistant glove. The sloping sides also make it easy to pour the contents out cleanly.
OEM Manufacturer
The 250 ml conical flask is produced by Jain Scientific Equipments Private Limited — trading as ScienceLab — as the OEM (original equipment manufacturer), at its own licensed factory at Saha, Ambala, Haryana, India. The company sells it factory-direct to schools, colleges, laboratories, dealers and importers rather than through a trading chain.
Replacement flasks and repeat orders for the same code are organised by the manufacturer itself — ask us. The ScienceLab profile gives an overview of the company.
Related Laboratory Equipment
Filtration, recrystallisation and solution work with this flask commonly uses:
- Glass Funnel — rests in the narrow mouth for gravity filtration
- Glass Stirrer (Agitator) — helps dissolve solids before heating
- Measuring Cylinder 250 ml — measures solvent volumes accurately
- Chemical Beaker 250 ml — an open-top vessel for the same volume range
- Conical Jar (Erlenmeyer) 500ml — a larger conical flask for stock solutions
Explore more apparatus in the Laboratory Equipment category.
Frequently Asked Questions
What are the key specifications of the Conical Jar (Erlenmeyer) 250 ml?
The Conical Jar (Erlenmeyer) 250 ml, code SCI-665/081, is a graduated borosilicate glass conical flask with a 250 ml capacity and a narrow mouth. It is listed as chemical resistant and heat resistant.
Can the Conical Jar (Erlenmeyer) 250 ml be used for filtration?
Yes. A glass funnel with folded filter paper rests securely in the narrow mouth of the Conical Jar (Erlenmeyer) 250 ml, and the flask collects the filtrate. The conical shape keeps the set-up stable on the bench.
How is the Conical Jar (Erlenmeyer) 250 ml different from a beaker?
The Conical Jar (Erlenmeyer) 250 ml has sloping sides and a narrow mouth, so liquids can be swirled without splashing and the mouth can be stoppered or plugged. A beaker has straight sides and a wide, open top for stirring and pouring.
Who manufactures the Conical Jar (Erlenmeyer) 250 ml?
Jain Scientific Equipments Pvt Ltd, which trades as ScienceLab, manufactures the Conical Jar (Erlenmeyer) 250 ml as the OEM at its own licensed factory at Saha, Ambala, Haryana, India, and supplies it factory-direct.
Can the Conical Jar (Erlenmeyer) 250 ml be ordered in bulk?
Yes. ScienceLab supplies the Conical Jar (Erlenmeyer) 250 ml in bulk quantities to schools, colleges, dealers and importers in India and international markets. Send your quantity and delivery location through the contact page.
What details help you prepare a quotation for this flask?
For the Conical Jar (Erlenmeyer) 250 ml, tell us the code SCI-665/081, how many flasks you need, any funnels, cylinders or other flask sizes to include, and where the goods should be delivered.
Request a Quote
Use the contact page or the enquiry cart to request a quotation for the Conical Jar (Erlenmeyer) 250 ml. Your quote is issued directly by the manufacturer in Ambala.
Last updated: 24 September 2026
 500 ml41.jpg)
Conical Jar (Erlenmeyer) 500ml
Conical Jar (Erlenmeyer) 500ml (Product Code: SCI-661/082) is a graduated 500 ml Erlenmeyer flask in borosilicate glass used to prepare, mix and briefly hold larger volumes of solutions and media in teaching and research laboratories. Laboratory technicians use it to make up stock solutions for a whole class, and the narrow mouth lets the contents be swirled vigorously or closed with a stopper. It is produced by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer of borosilicate laboratory glassware in India, at its own factory in Ambala.
Specifications
| Parameter | Detail |
|---|---|
| Type | Erlenmeyer flask |
| Capacity | 500 ml |
| Graduations | Graduated |
| Material | Borosilicate glass |
| Mouth | Narrow |
| Properties | Chemical resistant, heat resistant |
| Product code | SCI-661/082 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 500 ml Erlenmeyer Flask Used For?
Typical uses include preparing stock and dilute solutions of acids, bases and indicators before a practical, making up nutrient media in microbiology before plates are poured, shaking liquid mixtures for extraction, and collecting larger volumes of distillate or filtrate.
For mixing by swirling, fill the flask only up to where the sides begin to narrow, so the liquid cannot climb out of the mouth. Label each flask with the solution name and date, and stopper it when the contents must be kept for the rest of the session.
OEM Manufacturer
Jain Scientific Equipments Private Limited is the company behind the ScienceLab name and the OEM (original equipment manufacturer) of this 500 ml Erlenmeyer flask. The flask is made at its own licensed factory at Saha, Ambala, Haryana, India, and quoted and dispatched by the manufacturer itself.
Schools, colleges, research laboratories, dealers and importers can order matching sizes and repeat quantities directly — ask us. More information is on the ScienceLab profile page.
Related Laboratory Equipment
Preparing stock solutions and media in this flask usually involves:
- Measuring Cylinder 500 ml — measures solvent before it goes into the flask
- Rubber Stoppers without Holes Of Different Diameters — seal the flask between uses
- Glass Bottle, for Liquid Reagents — stores the finished solution
- Petri Dish (Complete) — receives media prepared in the flask
- Conical Jar (Erlenmeyer) 1000 ml — a larger flask for bulk batches
Browse more flasks and glassware in the Laboratory Equipment category.
Frequently Asked Questions
What is the capacity of the Conical Jar (Erlenmeyer) 500ml?
The Conical Jar (Erlenmeyer) 500ml, code SCI-661/082, holds 500 ml and is graduated for approximate volume checks. Its narrow mouth allows vigorous swirling and can be closed with a stopper or plug.
What glass is the Conical Jar (Erlenmeyer) 500ml made of?
The Conical Jar (Erlenmeyer) 500ml is made of borosilicate glass that is chemical resistant and heat resistant, so it can be warmed while preparing solutions and cleaned repeatedly in routine laboratory use.
Can the Conical Jar (Erlenmeyer) 500ml be closed for storage?
Yes, for short periods. The narrow mouth of the Conical Jar (Erlenmeyer) 500ml takes a rubber stopper or cotton plug; for longer storage, move the solution to a labelled reagent bottle. Stoppers are listed separately.
Who manufactures the Conical Jar (Erlenmeyer) 500ml?
The Conical Jar (Erlenmeyer) 500ml is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Buyers receive supply and quotations directly from the manufacturer.
Are the graduations on the 500 ml Erlenmeyer flask meant for precise measurement?
No. The graduations on the Conical Jar (Erlenmeyer) 500ml indicate approximate volume. Measure precise amounts with a measuring cylinder, pipette or volumetric flask, then use the conical flask for mixing and preparation.
What information is needed to quote the Conical Jar (Erlenmeyer) 500ml?
To quote the Conical Jar (Erlenmeyer) 500ml, we need the code SCI-661/082, the quantity, any stoppers or other flask sizes to include, and the delivery location in India or overseas. Send it via the contact page.
Request a Quote
For a quotation on the Conical Jar (Erlenmeyer) 500ml, contact us through the contact page or add it to the enquiry cart. The manufacturer sends the quote directly.
Last updated: 24 September 2026
 1000 ml609.jpg)
Conical Jar (Erlenmeyer) 1000 ml
Conical Jar (Erlenmeyer) 1000 ml (Product Code: SCI-659/083) is a 1000 ml graduated conical flask made of borosilicate glass, used for bulk preparation of solutions, buffers, culture media and distilled-water reserves in laboratories. Its capacity lets a technician prepare enough reagent for several student groups in one batch, while the narrow mouth keeps swirling spill-free. The flask is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM laboratory glassware manufacturer, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Type | Conical (Erlenmeyer) flask |
| Capacity | 1000 ml |
| Graduations | Graduated |
| Material | Borosilicate glass |
| Mouth | Narrow |
| Chemical resistance | Chemical resistant |
| Heat resistance | Heat resistant |
| Product code | SCI-659/083 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 1000 ml Conical Flask Used For?
The 1000 ml conical flask takes on the large-volume jobs in a laboratory: making up big batches of standard or buffer solution, holding culture media before dispensing, collecting large volumes of filtrate, keeping a reserve of distilled water on the bench, and running reactions that a whole class must see from a distance.
A full flask of this size is heavy, so lift it by the body with both hands rather than by the neck, and set it down on a flat, stable surface. Warm it gradually on a hot plate, and swirl rather than shake when mixing large volumes.
OEM Manufacturer
Jain Scientific Equipments Private Limited, which does business as ScienceLab, is the OEM (original equipment manufacturer) of this 1000 ml conical flask. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, so buyers get the flask straight from the factory rather than from a reseller.
That also means replacements and repeat orders are handled by the same manufacturer — ask us. Learn about the company on the ScienceLab profile.
Related Laboratory Equipment
Bulk solution preparation in this large flask typically uses these items as well:
- Measuring Cylinder 1000 ml — measures a full batch volume accurately
- Chemical Beaker 1000 ml — an open vessel for dissolving and stirring large volumes
- Glass Bottle, for Liquid Reagents wide mouth — stores prepared solutions long term
- Conical Jar (Erlenmeyer) 500ml — a smaller flask for half-size batches
See the full Laboratory Equipment range for more large-volume glassware.
Frequently Asked Questions
How much does the Conical Jar (Erlenmeyer) 1000 ml hold?
The Conical Jar (Erlenmeyer) 1000 ml, code SCI-659/083, has a capacity of 1000 ml with graduations for approximate volume. It is intended for bulk preparation of solutions and media in school, college and research laboratories.
What is the Conical Jar (Erlenmeyer) 1000 ml made of?
The Conical Jar (Erlenmeyer) 1000 ml is made of borosilicate glass listed as chemical resistant and heat resistant. This suits repeated preparation of solutions, gentle heating on a hot plate and frequent washing in busy laboratories.
How should the 1000 ml conical flask be handled when full?
Lift a full Conical Jar (Erlenmeyer) 1000 ml by the body with both hands, not by the neck, and place it on a flat, stable surface. Heat it gradually and allow it to cool before washing.
Who manufactures the Conical Jar (Erlenmeyer) 1000 ml?
ScienceLab, the trading name of Jain Scientific Equipments Pvt Ltd, is the OEM manufacturer of the Conical Jar (Erlenmeyer) 1000 ml. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India.
Can the Conical Jar (Erlenmeyer) 1000 ml be quoted with other sizes?
Yes. The Conical Jar (Erlenmeyer) 1000 ml can be quoted together with other conical flask sizes and matching cylinders or beakers from the ScienceLab range. List each item code and quantity in one enquiry.
Do you supply the 1000 ml conical flask to dealers and importers?
Yes. ScienceLab supplies the Conical Jar (Erlenmeyer) 1000 ml factory-direct to dealers, importers and institutions in India and international markets. Send the code SCI-659/083, quantity and destination through the contact page.
Request a Quote
Request a quotation for the Conical Jar (Erlenmeyer) 1000 ml through our contact page or the enquiry cart. Quotes are issued directly by the manufacturer.
Last updated: 24 September 2026
