T-Shaped Glass Tube (Product Code: SCI-685/060) is a three-way glass connector used to split one gas or liquid line into two, or join two lines into one, in chemistry and physics laboratory set-ups. Its side arm leaves the straight run at a right angle, and all three ends share a 7 mm diameter so the same rubber tubing fits every branch. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, for its chemistry lab glassware range.

Specifications

What Is a T-Shaped Glass Tube Used For?

A T-piece lets one supply serve two points. Typical uses include feeding gas from a single tap to two burners or two reaction vessels, tapping a side connection off a line to a manometer or pressure gauge, adding a bleed or vent to a suction line, and joining two delivery tubes into one outlet. Because the glass is clear, students can watch liquid levels, bubbles or condensation as they pass the junction.

Connect rubber tubing to each arm and add a pinch clamp on any branch that must be shut off during the experiment. Keep the working pressure low, support long tubing runs so they do not pull on the joint, and rinse the tube straight after use so reagents do not dry inside the bore.

OEM Manufacturer

The T-Shaped Glass Tube is made by the OEM itself: Jain Scientific Equipments Private Limited, known by its trade name ScienceLab, at its licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, laboratory dealers and importers buy it factory-direct rather than through a trader, and replacement pieces for breakages can be requested from the same source — ask us.

For vendor registration, tender and institutional buyers can note the company's GSTIN 06AAECJ8618A1ZT and Legal Entity Identifier (LEI) 3358004HRD1JIVXKYX49. More details are on the ScienceLab profile.

Related Laboratory Equipment

These items complete a branched gas or liquid line built around the T-piece:

• Rubber Tube (Laboratory) — connects each of the three arms to your apparatus.
• Elastic Clamps for Rubber Pipes (Mohr Clamp) — closes off one branch when it is not in use.
• Tightening for Screw Pipes (Hoffman Clamp) — adjusts the flow through a branch gradually.
• Y-Shaped Glass Tube — an angled alternative when a smoother branch is preferred.
• Glass Pipes of Different Diameters — straight pieces for stoppers and delivery tubes.

Explore the full Laboratory Equipment range.

Frequently Asked Questions

What is the diameter of the T-Shaped Glass Tube?
The T-Shaped Glass Tube has a listed diameter of 7 mm. Choose rubber tubing that grips a 7 mm glass tube firmly, and ask us through the contact page if the exact fit is critical for your apparatus.

What is a T-Shaped Glass Tube used for in the lab?
A T-Shaped Glass Tube splits one gas or liquid line into two branches or joins two lines into one. It is used to feed two burners from one tap, add a manometer connection, or fit a vent to a suction line.

Should I choose a T-shaped or a Y-shaped glass tube?
Choose the T-Shaped Glass Tube when the side connection should leave the main line at a right angle, such as a gauge or vent tap. A Y-shaped tube divides the flow at a gentler angle and suits evenly shared or merged streams.

How do I connect rubber tubing to the T-Shaped Glass Tube?
Wet the end of the T-Shaped Glass Tube, then push the rubber tubing on with a gentle twisting motion while holding the glass close to the joint. Never lever the tube by its side arm, as that places strain on the junction.

Who manufactures the T-Shaped Glass Tube?
The T-Shaped Glass Tube is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations and orders are handled directly by the manufacturer.

Can the T-Shaped Glass Tube be ordered in bulk for school labs?
Yes. The T-Shaped Glass Tube can be quoted in bulk for schools, colleges and distributors in India and international markets. Send the quantity, any matching tubing or clamps, and your delivery location through the contact page.

Request a Quote

Request a price for the T-Shaped Glass Tube on our contact page or add it to the enquiry cart. Your quotation is prepared by the manufacturer in Ambala.

Last updated: 24 September 2026

Y-Shaped Glass Tube (Product Code: SCI-265/061) is a forked glass connector used to merge two gas or liquid streams into one, or divide one stream into two, in school biology and chemistry laboratories. Its two arms branch at a shallow angle from a single stem, all in 7 mm glass, which gives a smoother flow path than a right-angled joint. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its school biology lab equipment.

Specifications

What Is a Y-Shaped Glass Tube Used For?

In biology classes the Y-tube is best known from the bell-jar breathing model, where the stem stands for the trachea and the two arms carry small balloons that act as lungs, showing how air divides into the bronchi. In chemistry it brings two gases together before they enter a reaction vessel, shares one gas supply between two outlets, or links two collection lines to a single delivery tube.

Fit rubber tubing to all three ends, mount the stem through a bored stopper where the apparatus needs an airtight seal, and clamp any arm you want to close. Handle the fork by the stem rather than the arms, and rinse it after each use so no residue collects at the junction.

OEM Manufacturer

Jain Scientific Equipments Private Limited trades as ScienceLab and is the original equipment manufacturer of this Y-Shaped Glass Tube. It is produced at the company's licensed factory in Saha, Ambala, Haryana, India, and sent factory-direct to schools, teacher-training colleges, dealers and importers.

Buying from the maker means one point of contact for your quotation and for any repeat or replacement order — simply ask us. Company details are on the ScienceLab profile page.

Related Laboratory Equipment

Pair the Y-tube with these items for breathing models and branched gas lines:

• Human Lung Model in Bell Jar — a ready-made version of the branching-airway demonstration.
• T-Shaped Glass Tube — the right-angled alternative for side connections.
• Rubber Tube (Laboratory) — links each arm to the rest of the apparatus.
• Rubber stoppers with holes of different diameters — seals the stem into a jar or flask.
• Elastic Clamps for Rubber Pipes (Mohr Clamp) — shuts one branch when needed.

Find more apparatus in our Laboratory Equipment category.

Frequently Asked Questions

What is the diameter of the Y-Shaped Glass Tube?
The Y-Shaped Glass Tube is listed with a 7 mm diameter and is made of clear glass. Choose rubber tubing that fits a 7 mm tube snugly, and contact us if your apparatus needs a precise fit confirmed before ordering.

How is the Y-Shaped Glass Tube used in a lung model demonstration?
In a lung model, the Y-Shaped Glass Tube represents the windpipe dividing into two bronchi. Balloons are tied to the two arms inside a bell jar, and the stem passes through a stopper so that moving a rubber sheet at the base inflates them.

Can the Y-Shaped Glass Tube carry both gases and liquids?
Yes. The Y-Shaped Glass Tube is heat and chemical resistant glass, so it can carry gases or liquids through rubber tubing in routine experiments. Keep flows at low pressure and secure the tubing so it cannot slip off an arm.

How should the Y-Shaped Glass Tube be cleaned?
Rinse the Y-Shaped Glass Tube with water straight after use, flushing each arm in turn, and use a thin tube brush for any residue. Let it drain and dry before storage so no liquid is left trapped at the junction.

Who manufactures the Y-Shaped Glass Tube?
The Y-Shaped Glass Tube is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India, and is supplied factory-direct to educational buyers and distributors.

What details should I give when requesting a quote for the Y-Shaped Glass Tube?
When requesting a Y-Shaped Glass Tube quotation, give the quantity, any tubing, stoppers or clamps to include, and the delivery location in India or abroad. Send it through the contact page for a reply from the manufacturer.

Request a Quote

To buy the Y-Shaped Glass Tube, contact us through the enquiry form or place it in the enquiry cart. Quotations are sent directly by the manufacturer.

Last updated: 24 September 2026

Drying Hose (Product Code: SCI-985/062) is a rigid glass drying tube used to hold a granular drying agent so that a gas passing through it loses its moisture before it is collected or tested. Despite the word “hose” in its name, it is listed as clear glass, 17 mm in diameter and 145 mm long, and it fits into a gas collection apparatus with stoppers and tubing. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Glass Drying Tube Used For?

Many gases made in school practicals, such as carbon dioxide or hydrogen, leave the generator carrying water vapour. Passing them through a tube packed with a drying agent removes that moisture, so students can collect a dry sample or show that a product such as water comes from the reaction itself and not from the wet gas. A drying tube can also sit on the open end of apparatus to stop damp room air getting in.

To prepare the tube, place a loose plug of cotton wool or glass wool at one end, fill it with granules of a suitable drying agent, plug the other end and close both ends with bored stoppers carrying short glass pipes. Pick a drying agent that does not react with the gas you are drying, and replace it when it becomes wet or caked.

OEM Manufacturer

ScienceLab, the trading name of Jain Scientific Equipments Private Limited, is the OEM for the Drying Hose. It is made at the company's own licensed factory in Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, institutional buyers, dealers and importers.

Dealing with the manufacturer gives you a single contact for quotations, repeat purchases and replacement glass — ask us whenever you need more. Find out more on the company profile.

Related Laboratory Equipment

These items are used with the drying tube in gas preparation and moisture-free work:

• Calcium Chloride Tube, Borosilicate Glass — an alternative drying-tube design for guarding apparatus from moisture.
• Rubber stoppers with holes of different diameters — close the ends and carry the inlet and outlet pipes.
• Glass Pipes of Different Diameters — short connectors through the stoppers.
• Rubber Tube (Laboratory) — joins the drying tube to the gas generator and receiver.
• Vacuum Desiccator — for keeping solids, rather than gases, dry.

See more glassware in the Laboratory Equipment category.

Frequently Asked Questions

What are the dimensions of the Drying Hose?
The Drying Hose is listed as a clear glass tube 17 mm in diameter and 145 mm long. The glass is described as heat and chemical resistant, which suits its use with drying agents and laboratory gases in school and college practicals.

Is the Drying Hose flexible like a rubber hose?
No. Despite its name, the Drying Hose is listed as a rigid glass tube, not flexible tubing. It is connected into a gas line with bored rubber stoppers and rubber tubing, so handle it as you would any other glassware.

Which drying agent should be used in the Drying Hose?
Fill the Drying Hose with a drying agent that does not react with the gas being dried; anhydrous calcium chloride is common for many gases but is not used for ammonia. The drying agent is not listed as included, so order it separately if needed.

How do I fill and connect the Drying Hose?
Plug one end of the Drying Hose with cotton or glass wool, add the drying granules, plug the other end, then close both ends with bored stoppers fitted with short glass pipes. Connect these to the gas line with rubber tubing.

Who manufactures the Drying Hose?
The Drying Hose is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations, bulk orders and repeat supplies are handled directly by the manufacturer.

Can the Drying Hose be ordered in quantity for school labs?
Yes. The Drying Hose can be quoted in quantity for schools, colleges and distributors in India and international markets. Share the number required, any stoppers or tubing to add, and your delivery location through the contact page.

Request a Quote

For a price on the Drying Hose, write to us through the contact page or add it to the enquiry cart. The quotation comes straight from the manufacturer.

Last updated: 24 September 2026

Blowing Safety Pipe (Product Code: SCI-528/063) is a metal blow pipe used to direct a narrow jet of air into a flame, producing a hotter, more concentrated flame for small heating tasks in chemistry laboratories. It is 350 mm long with a 40 mm upper diameter, and it is meant to be fed from an air pump rather than blown by mouth, for safety. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Blow Pipe Used For?

A blow pipe pushes extra air into the side of a burner or lamp flame, turning a soft, spreading flame into a small, hot, pointed one. In chemistry teaching it is associated with the classic dry tests of salt analysis, where a sample on a charcoal block is heated in the oxidising or reducing part of the flame. It remains a useful piece of chemistry lab equipment for schools in India and beyond that still teach these traditional tests.

Connect the pipe to an air pump with rubber tubing so the air stream is steady and nobody has to blow by mouth near hot material or fumes. Clamp the pipe firmly, aim the jet across the flame rather than at people, and let the metal cool before handling, since it warms up close to the flame.

OEM Manufacturer

The Blowing Safety Pipe comes from the OEM: Jain Scientific Equipments Private Limited, trading as ScienceLab, which makes it at its licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, institutions, dealers and importers are supplied factory-direct, without a trading intermediary.

Questions about fitting the pipe to your air supply, and any repeat orders, go straight to the manufacturer — just ask us. See the ScienceLab company profile for more about the business.

Related Laboratory Equipment

These items provide the flame and connections a blow pipe works with, or offer alternative designs:

• Bunsen Burner — the usual flame source for blow-pipe work.
• Alcohol Lamp 150 ml — a flame source for rooms without a gas supply.
• Rubber Tube (Laboratory) — links the pipe to the air pump.
• Blow Pipe Brass — a brass blow pipe for comparison.
• Blow Pipe — another blow pipe option in our range.

Browse the Laboratory Equipment category for more apparatus.

Frequently Asked Questions

What are the dimensions of the Blowing Safety Pipe?
The Blowing Safety Pipe is listed as a metal pipe 350 mm long with an upper diameter of 40 mm. Contact us if you need other construction details confirmed before ordering, such as how it connects to your air supply.

Why is an air pump recommended with the Blowing Safety Pipe?
An air pump is recommended with the Blowing Safety Pipe because it gives a steady air stream and avoids blowing by mouth close to a hot flame, heated samples or fumes. A constant supply also keeps the flame shape stable during a test.

What is the Blowing Safety Pipe used for?
The Blowing Safety Pipe directs a jet of air into a burner or lamp flame to make it hotter and more pointed. It is used for traditional blow-pipe and charcoal-block tests in salt analysis and for small tasks that need a concentrated flame.

Is an air pump included with the Blowing Safety Pipe?
An air pump is not listed as included with the Blowing Safety Pipe. If you need a suitable air supply or connecting tubing in the same order, mention it in your enquiry on the contact page and we will advise.

Who manufactures the Blowing Safety Pipe?
The Blowing Safety Pipe is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Educational buyers and distributors order it directly from the manufacturer.

What should a quotation request for the Blowing Safety Pipe include?
A Blowing Safety Pipe quotation request should give the quantity, any burners, lamps or tubing you want with it, and your delivery location in India or abroad. Bulk orders for schools and dealers are quoted directly by the manufacturer.

Request a Quote

Ask for a quotation on the Blowing Safety Pipe through our contact page or add it to the enquiry cart. Prices come directly from the manufacturer in Ambala.

Last updated: 24 September 2026

Some Glass (Product Code: SCI-933/064) is a conical borosilicate glass funnel used to filter mixtures and pour liquids into narrow-necked vessels in school and college laboratories. The funnel measures 75 mm across the rim and has a short tail (stem), which suits quick transfers and filtering warm solutions. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, within its borosilicate laboratory glassware range.

Specifications

What Is a Glass Funnel Used For?

The commonest job for this funnel is gravity filtration: a filter paper is folded into a cone, seated in the funnel and wetted, and the mixture is poured in so that the solid stays behind while the clear filtrate runs into a flask or beaker. It is equally handy for pouring reagents into bottles, burettes or flasks without spills, and for adding liquids to apparatus with a narrow opening.

A short stem is preferred when filtering a hot saturated solution, because crystals have less chance to form and block a short tail as the liquid cools. Support the funnel in a funnel stand or a ring on a retort stand, pour down a glass rod to control the flow, and keep the liquid level below the top of the filter paper.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), the OEM that makes this funnel at its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414). Buyers therefore receive the funnel direct from the maker rather than from a trader.

Schools, colleges, dealers and importers can place first and repeat orders with the same manufacturer — ask us for quantities to suit your labs. Read the company profile for more.

Related Laboratory Equipment

A filtration set-up built around this funnel typically uses:

• Filter Paper — folded into a cone inside the funnel.
• Funnel Stand, Double — holds two funnels for side-by-side filtrations.
• Conical Flask — collects the filtrate beneath the stem.
• Stirring Rod, Glass — guides the liquid into the funnel without splashing.
• Separating Funnel (Separator) — for separating two liquids rather than a solid from a liquid.

The complete range is in our Laboratory Equipment category.

Frequently Asked Questions

What is the product listed as Some Glass?
Some Glass (Product Code SCI-933/064) is a glass funnel. Its listing describes a conical borosilicate glass funnel, 75 mm in diameter with a short tail, used for filtration and for pouring liquids in school, college and research laboratories.

What size is the Some Glass funnel?
The Some Glass funnel is 75 mm in diameter with a short tail. The conical body is made of clear borosilicate glass that is listed as heat and chemical resistant, so it can handle warm solutions and common laboratory reagents.

Why does a short tail matter on a glass funnel?
A short tail on the Some Glass funnel helps when filtering hot, nearly saturated solutions, because crystals are less likely to form and block the stem as the liquid cools. It also makes the funnel easier to fit above short receiving vessels.

How do I prepare filter paper for the Some Glass funnel?
For the Some Glass funnel, fold a round filter paper in half and then in half again, open it into a cone, and seat it in the funnel. Wet it slightly so it sits flat against the glass and keep the paper edge just below the rim.

Who manufactures the Some Glass funnel?
The Some Glass funnel is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations and supplies for schools, dealers and importers come directly from the manufacturer.

Can the Some Glass funnel be ordered in bulk or for export?
Yes. The Some Glass funnel can be quoted in bulk for institutions and distributors in India and international markets. Send the quantity, any filter paper or stands to include, and the delivery location through the contact page.

Request a Quote

To order this glass funnel, send your requirement through the contact page or add Some Glass to the enquiry cart. The manufacturer will reply with a direct quotation.

Last updated: 24 September 2026

Separating Funnel (Separator) (Product Code: SCI-153/065) is a borosilicate glass funnel used to separate two liquids that do not mix, and to carry out small solvent extractions, in chemistry teaching and research labs. It has a 125 ml capacity and is listed with a faucet (tap) and corkscrew, so the lower layer can be drained off in a controlled way. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Separating Funnel Used For?

A separating funnel lets students split immiscible liquids such as oil and water, or an organic solvent and an aqueous solution. After shaking, the mixture settles into two layers; opening the tap drains the lower layer into a flask while the upper layer stays behind. The same technique is used for simple extractions, for example moving a dissolved coloured substance from water into a solvent, and for washing a solvent layer with water.

The 125 ml size keeps quantities small, which suits student practicals and saves solvent. Mount the funnel in a ring on a retort stand, close the tap before filling, and when shaking hold the stopper and tap firmly, then vent through the tap pointed away from people. Remove the stopper before draining so the liquid runs freely.

What to Specify When Ordering

• Capacity — this item is 125 ml; state if you need a larger funnel as well.
• Quantity per lab or per student group.
• Any tap and stopper preference, so the listed faucet and corkscrew fittings can be confirmed.
• Supporting items such as retort stands, rings and receiving flasks.

OEM Manufacturer

Jain Scientific Equipments Private Limited, known as ScienceLab, is the OEM of this Separating Funnel (Separator) and makes it at its own licensed factory in Saha, Ambala, Haryana, India. It reaches schools, universities, institutions, dealers and importers factory-direct.

Spare or replacement funnels for breakages can be ordered from the manufacturer that made the originals — ask us. More about the company is on the ScienceLab profile.

Related Laboratory Equipment

These items support the funnel or offer a different size or style:

• Separating Funnel 500ml — a larger funnel for bigger batches.
• Separatory Funnel, Squibb style — an alternative body shape.
• Retort Stand — holds the funnel upright with a ring or clamp.
• Conical Flask — receives the lower layer as it drains.

Visit the Laboratory Equipment category for more glassware.

Frequently Asked Questions

What capacity is the Separating Funnel (Separator)?
The Separating Funnel (Separator) has a capacity of 125 ml and is made of clear borosilicate glass. This small size suits student practicals and small-scale extractions where only modest volumes of solvent are needed.

What is the Separating Funnel (Separator) used for?
The Separating Funnel (Separator) separates two liquids that do not mix, such as oil and water. After the layers settle, the tap is opened to drain the lower layer, and the funnel is also used for simple solvent extractions and washing.

Does the Separating Funnel (Separator) have a tap and stopper?
The Separating Funnel (Separator) is listed with a faucet (tap) and corkscrew. If your practical needs a particular stopcock or stopper style, please confirm it through the contact page before ordering.

How do I release pressure when shaking a separating funnel?
When shaking the Separating Funnel (Separator), hold the stopper and tap firmly, turn the funnel upside down with the stem pointing up and away from people, and open the tap briefly to vent. Repeat until no more gas escapes.

Can the Separating Funnel (Separator) be heated?
Although its glass is listed as heat resistant, the Separating Funnel (Separator) is meant for room-temperature work and should not be heated directly. Let warm liquids cool before adding them, especially volatile solvents that can build up pressure.

Who manufactures the Separating Funnel (Separator)?
The Separating Funnel (Separator) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations for schools, dealers and importers in India and international markets come directly from the manufacturer.

Request a Quote

Request a price for the Separating Funnel (Separator) through our contact page or add it to the enquiry cart. Quotations are issued directly by the manufacturer in Ambala.

Last updated: 24 September 2026

Cork Glass Bells (Product Code: SCI-541/066) is a clear glass bell with a corrugated cap, used to enclose plants, specimens and small apparatus in biology, chemistry and physics demonstrations. It measures 150 mm in diameter and 200 mm in length, a compact size that fits on a bench or plate while leaving the contents fully visible. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its plant biology lab equipment.

Key Details

What Is a Glass Bell Jar Used For?

A glass bell creates a small closed space on the bench. In plant physiology it covers a potted plant or leafy shoot to show water vapour condensing during transpiration, or to keep the air around a plant separate for photosynthesis and respiration comparisons. In chemistry and general science it is used for the classic candle-under-a-jar demonstration and to keep dust or draughts away from specimens, crystals and delicate apparatus.

Stand the bell on a smooth glass plate or tray, and seal the rim with a little petroleum jelly when an airtight enclosure is needed. Lift it with both hands, set it down gently on a flat surface, and clean it with warm soapy water rather than abrasive powders so it stays clear.

OEM Manufacturer

These glass bells are an original product of Jain Scientific Equipments Private Limited, which trades as ScienceLab. As the OEM, the company makes them at its licensed factory in Saha, Ambala, Haryana, India, and supplies schools, colleges, institutions, dealers and importers direct from the factory.

Questions about the cap design and any replacement or repeat order are answered by the manufacturer itself — ask us. See our company profile for more background.

Related Laboratory Equipment

These products are used for similar enclosed-space demonstrations or offer another bell-jar style:

• Bell Jar, Knobbed — an alternative bell jar with a knob for lifting.
• Bell Jar (Plant Physiology) — a bell jar intended for plant experiments.
• Apparatus for Photosynthesis — for related plant biology practicals.
• Human Lung Model in Bell Jar — a ready-built breathing demonstration.

More apparatus is listed under Laboratory Equipment.

Frequently Asked Questions

What size is the Cork Glass Bells jar?
Cork Glass Bells is listed as a clear glass bell 150 mm in diameter and 200 mm long. This bench-top size covers a small potted plant, a candle or a group of specimens while keeping them easy to see.

What is the corrugated cap on Cork Glass Bells?
Cork Glass Bells is listed as a glass bell with a corrugated cap. If your experiment needs a particular closure, such as a stopper or a tube passing through the top, please confirm the cap design through the contact page before ordering.

Which experiments use Cork Glass Bells?
Cork Glass Bells is used to cover plants for transpiration and photosynthesis comparisons, to show that a candle goes out in an enclosed space, and to protect specimens or crystals from dust. It suits school biology and general science practicals.

Can Cork Glass Bells be used under vacuum?
Vacuum use is not stated in the listing for Cork Glass Bells, so do not evacuate it unless we have confirmed it is suitable. For vacuum work, ask us about a purpose-built vacuum desiccator or bell jar through the contact page.

Who manufactures Cork Glass Bells?
Cork Glass Bells is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, dealers and importers receive quotations and supplies directly from the manufacturer.

Can Cork Glass Bells be ordered in bulk for school labs?
Yes. Cork Glass Bells can be quoted in bulk for schools, colleges and distributors in India and international markets. Share the quantity and delivery location through the contact page, and mention any matching plates or related apparatus you need.

Request a Quote

For a quotation on Cork Glass Bells, write to us on the contact page or add it to the enquiry cart. The manufacturer responds with a direct quote.

Last updated: 24 September 2026

Crystallizers (Product Code: SCI-620/067) are wide, flat-bottomed glass dishes used to grow crystals from solution, evaporate liquids over a large surface and hold cooling or water baths in chemistry laboratories. This large version is 180 mm in diameter and 90 mm high with a grip, and its glass is listed as heat and chemical resistant. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM and school science lab equipment manufacturer, at its own factory in Ambala, India.

Specifications

What Are Crystallizers Used For?

The broad base of a crystallizer spreads a solution into a shallow layer, so solvent evaporates evenly and crystals of substances such as copper sulphate or alum can form and be seen clearly. The large 180 mm dish is well suited to class demonstrations and to growing several crystals at once, and its depth also makes it a practical ice bath or cold-water bath around flasks and test tubes, or a small trough for collecting gas over water.

For crystal growing, pour a warm saturated solution into the dish, cover it loosely to keep out dust, and leave it undisturbed. Warm the dish gently if needed, for example over a water bath, rather than heating it hard over a direct flame, and clean away dried crusts with warm water before they harden.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which operates under the ScienceLab name, is the OEM of these Crystallizers and makes them at its licensed factory in Saha, Ambala, Haryana, India. They are supplied factory-direct to schools, colleges, institutions, dealers and importers.

If you need the smaller dish in the same order, or replacements later, the manufacturer handles it directly — ask us. Learn more on the ScienceLab company profile.

Related Laboratory Equipment

Items used with crystallizers when preparing, evaporating and covering solutions:

• Crystallizers 90 mm — the small dish for individual student work.
• Porcelain Dish (China Dish) — for evaporating to dryness over a flame.
• Clock Glass (Borosilicate Glass) — a cover or evaporating surface for small samples.
• Stirring Rod, Glass — for dissolving the solute before crystallisation.
• Tripod Stand 200mm — supports a water bath for gentle warming.

Browse the full Laboratory Equipment range.

Frequently Asked Questions

What size are the Crystallizers?
The Crystallizers are glass dishes 180 mm in diameter and 90 mm high, with a grip. This larger size gives a broad evaporating surface for class demonstrations and is deep enough to use as a cooling or water bath.

What are Crystallizers used for in the lab?
Crystallizers are used to grow crystals from saturated solutions, evaporate liquids over a wide surface, and hold ice or water baths around smaller vessels. The 180 mm dish can also act as a small trough for collecting gas over water.

Can the Crystallizers be heated?
The Crystallizers are made of glass listed as heat resistant, so they can be warmed gently, for example over a water bath. For strong heating or evaporating to dryness over a flame, a porcelain dish is the more suitable choice.

Should I choose the 180 mm Crystallizers or the 90 mm size?
Choose the 180 mm Crystallizers for demonstrations, several crystals at once, or bath use; the 90 mm crystallizer suits individual students working with small volumes. Many labs order both sizes, which can be quoted together on one enquiry.

Who manufactures the Crystallizers?
The Crystallizers are manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Quotations and bulk supplies come directly from the manufacturer.

What details are needed for a Crystallizers quotation?
For a Crystallizers quotation, tell us the quantity, whether you also need the 90 mm size or related glassware, and your delivery location in India or international markets. Send the request through the contact page.

Request a Quote

Enquire about the Crystallizers through our contact page or add them to the enquiry cart. You will receive a quotation directly from the manufacturer.

Last updated: 24 September 2026