Tightening for Screw Pipes (Hoffman Clamp) (Product Code: SCI-692/034) is a screw-operated tubing clamp used to squeeze rubber tubing gradually and set a controlled flow of liquid or gas in chemistry lab apparatus across India. Made of nickel-plated steel for 12 mm tubing, it has a projection plate that protects the tube from the screw end and a hinged bottom bar so it can be fitted or removed mid-tube. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Hoffman Clamp Used For?

Where a Mohr clamp is simply open or shut, the Hoffman clamp can be set anywhere in between. Turning the screw squeezes the tubing a little at a time, so students can set a slow, steady drip from a reservoir, adjust the cooling water running through the condenser of distillation apparatus in India's college labs, or throttle gas from a generator to an even stream. Because the bottom bar is hinged, the clamp can be added to an assembled line without disconnecting either end of the tube.

To fit it, swing the bottom bar open, lay the tubing across, close the bar and turn the screw slowly until the flow is right. The projection plate spreads the pressure so that the screw end does not bite into the rubber. Loosen the clamp at the end of the session so the tubing recovers its shape, and wipe the nickel-plated surface clean of any spills.

What to Specify When Ordering

• Tubing size: this clamp is listed for 12 mm pipe; ask us about other sizes.
• The number of clamps needed per apparatus or per bench.
• Whether rubber tubing or spring (Mohr) clamps should be quoted too.

OEM Manufacturer

ScienceLab is the trade name of Jain Scientific Equipments Private Limited, the OEM that manufactures this Hoffman clamp at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers are supplied factory-direct, and repeat orders or additional clamps are arranged with the manufacturer itself — ask us. Institutional buyers completing vendor forms can use the company's GSTIN 06AAECJ8618A1ZT and LEI 3358004HRD1JIVXKYX49. Read more on the ScienceLab company profile.

Related Laboratory Equipment

These items are used with a screw clamp when building or controlling tubing lines:

• Screw Pipe Clamp (Hoffman Clamp) — another Hoffman screw clamp listing, for a different tubing size.
• Elastic Clamps for Rubber Pipes (Mohr Clamp) — a spring clamp for simple on-off control.
• Rubber Tube (Laboratory) — tubing to regulate with the clamp.
• Hoffman Screw Clip — a screw clip in the Chemistry Lab Equipment range.

See more clamps and fittings in the Laboratory Equipment category.

Frequently Asked Questions

What tubing size is the Hoffman clamp for?
Tightening for Screw Pipes (Hoffman Clamp) is listed for 12 mm pipe (tubing). If your apparatus uses a different tubing size, tell us its outer diameter through the contact page so we can suggest a suitable clamp before you order.

Why does it have a hinged bottom bar?
The hinged bottom bar on Tightening for Screw Pipes (Hoffman Clamp) swings open, so the clamp can be placed on or taken off rubber tubing without disconnecting either end of the tube. This saves dismantling a distillation or gas set-up that is already assembled.

Will the screw damage the tubing?
No. Tightening for Screw Pipes (Hoffman Clamp) has a projection plate between the screw end and the tubing, so the screw presses on the plate rather than cutting into the rubber. Tighten gradually and loosen the clamp after use to extend tubing life.

Who manufactures this Hoffman clamp?
Tightening for Screw Pipes (Hoffman Clamp) is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its licensed factory at Saha, Ambala, Haryana, India. Laboratories, dealers and importers buy it factory-direct, with quotations issued by the manufacturer rather than an agent.

How does it differ from a Mohr clamp?
Tightening for Screw Pipes (Hoffman Clamp) squeezes tubing by degrees as its screw turns, giving a steady partial flow, whereas a Mohr clamp is a quick on-off spring pinch. Many labs keep both: Hoffman clamps for fine control and Mohr clamps for fast shut-off.

What is it made of and how is it cleaned?
Tightening for Screw Pipes (Hoffman Clamp) is made of nickel-plated steel. Wipe off chemical spills promptly with a damp cloth and keep the screw thread clean and dry so that it turns smoothly each time the flow is adjusted.

Request a Quote

For a quotation on Tightening for Screw Pipes (Hoffman Clamp), send the quantity and tubing size through the contact page or add the clamp to the enquiry cart; the manufacturer replies directly.

Last updated: 24 September 2026

Laboratory Stand with Accessories (Product Code: SCI-666/035) is a retort stand kit to which clamps and rings are attached to hold burettes, test tubes, flasks and other glassware at a chosen height during experiments. Built from a powder-coated cast iron base and a chrome-plated mild steel rod, it arrives with 2 metal rings and medium clamps, so a single kit prepares a bench for heating, filtering or titrating. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Retort Stand Used For?

Think of the stand as a vertical framework that can be rebuilt for each practical. Fix a ring low on the rod with a gauze on top and it becomes a heating station for a beaker; set a ring higher and it carries a filter funnel above a collecting flask; attach a clamp and it grips a boiling tube at an angle over a flame or holds a burette above a titration flask. For anyone setting up a retort stand for lab work in India, the included rings and clamps cover these common practicals straight out of the box.

Screw the rod firmly into the base before loading anything, and position the stand so that the glassware sits over the base. Add rings and clamps from the bottom up, keeping the heaviest vessel lowest on the rod. Where more clamps are needed, boss heads fix them at right angles to the rod, and schools looking for a lab stand, clamp and boss head in India can order all three together.

What to Specify When Ordering

• The number of complete kits (each with base and rod, 2 metal rings and medium clamps).
• Any additional rings, clamps or boss heads beyond the kit.
• The glassware you plan to hold, so clamp sizes can be matched.
• Confirmation of the listed "contours" item, if it matters for your set-up.

OEM Manufacturer

This stand kit is manufactured by ScienceLab, the trading name of Jain Scientific Equipments Private Limited, which acts as OEM and produces it at its own licensed factory at Saha, Ambala, Haryana, India. The complete kit ships from the one manufacturer, so replacement parts for an existing stand can be requested from the same source — ask us. Schools, colleges, dealers and importers buy factory-direct; see the ScienceLab company profile.

Related Laboratory Equipment

These items turn the stand into a working heating or titration set-up:

• Clamp Bar Clamps (Counter Clamp) — a self-closing burette clamp for titrations.
• Ceramic Mesh Square — a gauze to rest on a ring when heating.
• Burette for Bases 25 ml — a burette for titration set-ups.
• Boss Head — fixes extra clamps to the rod.
• Lab Stand with Accessories — another stand-kit listing.

More stands and supports are in the Laboratory Equipment category.

Frequently Asked Questions

What is included with the Laboratory Stand with Accessories?
Laboratory Stand with Accessories includes a base and rod, 2 metal rings and medium clamps; our listing also names "contours", so please confirm that item with us if you need it. Together these parts let one bench hold burettes, test tubes and flasks during experiments.

What materials is it made from?
Laboratory Stand with Accessories combines a cast iron base finished with powder coating and a mild steel rod that is chrome plated. The heavy base keeps the stand steady, while the chrome-plated rod wipes clean easily after practicals.

Can extra clamps and rings be added?
Yes. Laboratory Stand with Accessories can carry further clamps and rings on the same rod, usually fixed with boss heads. Tell us which extra clamps, rings or boss heads you need, and we will quote them together with the stands.

Who manufactures the Laboratory Stand with Accessories?
Jain Scientific Equipments Pvt Ltd (ScienceLab) is the OEM for Laboratory Stand with Accessories and makes it at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order the kit factory-direct, with the quotation coming from the manufacturer.

How do I keep the stand stable?
Keep Laboratory Stand with Accessories stable by placing glassware over the base rather than beyond it, fixing heavy flasks low on the rod and checking every clamp is tight before heating or filling a burette. Do not move the stand while apparatus on it is hot.

Is it available for full lab fit-outs?
Yes, Laboratory Stand with Accessories is available for single benches or complete laboratory fit-outs, including bulk and export orders from schools, colleges, dealers and importers. Send quantities and any extra accessories through the contact page for a quotation straight from the manufacturer.

Request a Quote

Quotations for Laboratory Stand with Accessories come direct from the manufacturer; send your requirements through the contact page or add the kit to the enquiry cart.

Last updated: 24 September 2026

Porcelain Mortar with Crusher (Product Code: SCI-889/036) is a grinding set used to reduce crystals, salts and other solids to powder, or blend them together, on the laboratory bench. It pairs a white, chemical-resistant porcelain mortar of 80 mm diameter with a 100 mm porcelain crusher, a size that suits one student's sample in practicals such as school salt analysis. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is a Porcelain Mortar with Crusher Used For?

Grinding exposes fresh surface, which makes solids dissolve, react and reveal their properties more readily. In salt analysis, students powder an unknown salt before the dry tests and flame tests; in the mixtures-and-compounds practical, they blend iron filings and sulphur powder evenly before comparing the mixture with the heated product; and in environmental work, dried soil is crushed before its pH is tested. That range of uses is why the set appears on school lab instruments lists in India.

Put in only a small portion at a time and work the crusher with a rolling, pressing motion, scraping powder back from the walls with a spatula. Never grind strong oxidising agents together with reducing agents or organic matter, because friction can ignite such mixtures. Rinse the bowl with water and a soft brush straight after use, let it dry fully, and avoid knocking the crusher against the rim, where porcelain chips most easily.

OEM Manufacturer

Porcelain Mortar with Crusher is produced by Jain Scientific Equipments Private Limited, trading as ScienceLab, which is the OEM and makes it at its own licensed factory at Saha, Ambala, Haryana, India. As a school laboratory equipment manufacturer, the company supplies schools, colleges, dealers and importers direct, and additional sets for new sections or a spare crusher after a breakage can be quoted by the maker — ask us. Visit the ScienceLab company profile for more.

Related Laboratory Equipment

Sample preparation continues with these items after grinding:

• Spoons for Substances — a stainless steel spoon to transfer the ground powder.
• Capsule (Cup) Porcelain — a small porcelain cup for heating or evaporating the prepared sample.
• Semi-Analytical Scales with Weighing Stone Boxes — for weighing powdered samples.
• Pestle And Mortar — another mortar set in the Biology Lab range.
• Havana Porcelain — a comparable porcelain mortar listing.

Browse more porcelain and bench ware in the Laboratory Equipment category.

Frequently Asked Questions

What are the sizes of the Porcelain Mortar with Crusher?
Porcelain Mortar with Crusher has a mortar 80 mm in diameter and a porcelain press, or crusher, 100 mm long. This compact pairing handles the small quantities used in school and college practicals, one student or group at a time.

Is the crusher included with the mortar?
Yes. Porcelain Mortar with Crusher is accompanied by its porcelain press (crusher), 100 mm long, so the mortar and pestle arrive as a matched set. If a crusher is broken later, a replacement can be requested from the manufacturer; just ask us.

What materials can be ground in it?
Porcelain Mortar with Crusher is used for grinding and mixing materials such as salts, crystals and dried soil or plant samples. Its porcelain is chemical resistant, but never grind strong oxidising agents together with reducing or organic substances, as friction can ignite them.

Who manufactures the Porcelain Mortar with Crusher?
The Porcelain Mortar with Crusher is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM at its own licensed factory in Saha, Ambala, Haryana, India. It is supplied factory-direct to schools, colleges, dealers and importers, with quotations from the maker.

How should it be cleaned and stored?
Clean Porcelain Mortar with Crusher straight after use with water and a soft brush, then dry it fully so no residue carries over to the next sample. Store the crusher inside the bowl in a padded drawer, since porcelain can chip if dropped or knocked.

What does a quotation request need?
To request a quotation for Porcelain Mortar with Crusher, give the number of sets, your delivery location and any spoons, dishes or balances to be priced together. Schools, colleges, dealers and importers in India and international markets receive quotes directly from the manufacturer.

Request a Quote

Send your quantity for Porcelain Mortar with Crusher through the contact page or add it to the enquiry cart; the quotation is prepared by the manufacturer.

Last updated: 24 September 2026

Capsule (Cup) Porcelain (Product Code: SCI-394/037) is a small white porcelain cup, or capsule, used to evaporate solutions, dry crystals and warm small samples during chemistry practicals in school and college laboratories. It holds 50 ml and is made of chemical-resistant porcelain, the kind of vessel buyers look for as an evaporating dish for India's teaching labs. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Porcelain Capsule Used For?

Its main job is to turn a solution back into a solid. Students evaporate a filtered salt solution in the capsule until crystals start to form at the edge, then leave it to cool so that larger crystals grow — the core of any crystallization kit for schools in India. The white porcelain also makes colour changes easy to follow, for example when blue hydrated copper sulphate turns white as its water of crystallisation is driven off.

Stand the capsule on a wire gauze over a tripod and heat it gently, stirring with a glass rod so the liquid does not spit. Stop heating before the last of the liquid has gone and let the remaining heat finish the job. Lift the hot capsule with tongs and set it on a heat-resistant mat, never on a cold or wet bench, because a sudden temperature change can crack porcelain.

OEM Manufacturer

Capsule (Cup) Porcelain is made by ScienceLab — the trading name of Jain Scientific Equipments Private Limited — at the company's own licensed factory in Saha, Ambala, Haryana, India, where it acts as the OEM. Laboratories order it straight from the manufacturer, which keeps quotations simple and lets breakages be replaced through the same channel; just ask us. Schools, colleges, dealers and importers are all served factory-direct, as the ScienceLab company profile explains.

Related Laboratory Equipment

Evaporation and crystallisation practicals also call for these items:

• Ceramic Mesh Square — a wire gauze to rest the capsule on over a flame.
• Tripod Stand 200mm — supports the gauze and capsule.
• Alcohol Lamp 150 ml — a gentle heat source for evaporation.
• Crucible & Beaker Tongs — for lifting the hot capsule.
• Porcelain Dish (China Dish) — another porcelain dish listing.

Find more porcelain ware and heating accessories in the Laboratory Equipment category.

Frequently Asked Questions

What is the capacity of Capsule (Cup) Porcelain?
Capsule (Cup) Porcelain holds 50 ml. That volume suits evaporating small quantities of salt solution or warming a small solid sample in school practicals, while keeping heating times short. Fill it only partly when boiling liquids so the contents do not spit over the rim.

What is a porcelain capsule?
Capsule (Cup) Porcelain is a small porcelain vessel, often called an evaporating dish, used to concentrate solutions, dry crystals and heat small samples. Its white, chemical-resistant porcelain shows colour changes clearly, for example when blue copper sulphate crystals lose their water.

Can the capsule be heated over a flame?
Porcelain capsules like Capsule (Cup) Porcelain are normally heated on a wire gauze over a burner or spirit lamp. Warm it gradually, never place it hot onto a cold or wet surface, and move it with tongs, since sudden temperature changes can crack porcelain.

Who manufactures Capsule (Cup) Porcelain?
Capsule (Cup) Porcelain is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy it factory-direct, and quotations come from the maker itself.

How should it be cleaned?
Clean Capsule (Cup) Porcelain once it has cooled: soak off crystal residue in warm water, loosen deposits with a soft brush, and rinse with distilled water before drying. Avoid harsh scouring, and inspect the cup for hairline cracks before heating it again.

Can it be ordered in class sets?
Yes, Capsule (Cup) Porcelain can be quoted in class-set and bulk quantities for schools, colleges, dealers and importers. Send the quantity, delivery location and any gauzes, tripods or tongs you want included through the contact page to receive a quotation from the manufacturer.

Request a Quote

Ask for a quotation on Capsule (Cup) Porcelain via the contact page, or add it to the enquiry cart with your other items; the manufacturer replies directly.

Last updated: 24 September 2026

Krooxhiola (Pot) Porcelain (Product Code: SCI-419/038) is a small lidded porcelain pot, the vessel laboratories call a crucible, used to heat solids, burn off volatile matter and hold samples during ignition experiments in chemistry practicals. It has a capacity of 30 ml, comes with a lid and is made of white porcelain, suiting the small samples of school and college gravimetric work. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Porcelain Crucible Used For?

Crucibles handle the experiments where a solid is heated strongly and weighed before and after. Students burn a coil of magnesium ribbon in the lidded pot, lifting the lid now and then to let air in, and use the mass gained to work out the formula of magnesium oxide. The same pot drives the water out of a hydrated salt until its mass stops changing, or reduces a dried plant or food sample to ash so its mineral content can be estimated. These quantitative practicals make a lidded crucible basic chemistry lab equipment in India's senior secondary labs.

Seat the crucible in a pipe-clay triangle on a tripod, warm it gently at first and then heat strongly. Always lift it and its lid with crucible tongs, and let it cool on a heat-resistant mat or in a desiccator before weighing. If the lid was used during heating, weigh the crucible and lid together every time.

What to Specify When Ordering

• The quantity of crucibles (each comes with a lid).
• Whether pipe-clay triangles and crucible tongs should be quoted together.
• Any requirement for a particular porcelain grade, as the listing describes low-grade porcelain.

OEM Manufacturer

Jain Scientific Equipments Private Limited (CIN U29309HR2020PTC087597), trading as ScienceLab, is the OEM of this porcelain pot and produces it at its licensed factory at 449, HSIIDC Industrial Area, Saha, Ambala (Factory Licence AMB-ONLINE-CHD-J-414). As a chemistry lab equipment manufacturer in India, it supplies schools, colleges, dealers and importers factory-direct, and extra crucibles or a replacement lid are handled by the same maker — ask us. More on the ScienceLab company profile.

Related Laboratory Equipment

Heating a crucible safely needs these supporting items:

• Triangles for placing pots — triangles that seat small pots over the flame.
• Crucible Tong — for lifting the hot crucible and lid.
• Tripod Stand 200mm — supports the triangle and crucible.
• Bunsen Burner — a heat source for strong heating.
• Crucible with lid — another crucible listing in the Chemistry Lab Equipment range.

More porcelain ware is listed in the Laboratory Equipment category.

Frequently Asked Questions

What is Krooxhiola (Pot) Porcelain?
Krooxhiola (Pot) Porcelain is ScienceLab's catalogue listing for a small porcelain crucible with a lid: a 30 ml white porcelain pot for heating solids in experiments such as burning magnesium or driving water out of hydrated salts. The unusual name comes from our original catalogue.

Does it come with a lid?
Yes, Krooxhiola (Pot) Porcelain comes with a lid. The lid limits the loss of solid product and smoke during heating and can be lifted slightly with tongs to let air in; weigh the crucible and lid together whenever the lid was used.

What is its capacity?
Krooxhiola (Pot) Porcelain has a capacity of 30 ml. That suits the small samples used in school and college gravimetric practicals, which heat through and cool down faster in a small crucible, helping a class reach constant mass sooner.

What grade of porcelain is it?
Our catalogue describes Krooxhiola (Pot) Porcelain as low-grade porcelain. If your method calls for a particular porcelain type or heating limit, please ask us through the contact page before ordering so we can confirm whether this crucible suits your procedure.

Who manufactures Krooxhiola (Pot) Porcelain?
Krooxhiola (Pot) Porcelain is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. It is sold factory-direct to schools, colleges, dealers and importers, so every quotation comes from the maker.

How should it be heated safely?
Heat Krooxhiola (Pot) Porcelain on a pipe-clay triangle over a tripod, warming it gently before strong heating, and always move it with crucible tongs. Let the crucible cool on a heat-resistant mat or in a desiccator before weighing, never on a cold, wet surface.

Request a Quote

To price Krooxhiola (Pot) Porcelain, send the quantity through the contact page or add it to the enquiry cart; quotations come straight from the manufacturer.

Last updated: 24 September 2026

Spoon- shoulder (Product Code: SCI-325/039) is a porcelain spoon spatula used to collect, scrape and portion solids and pastes — for example lifting crystals off a filter paper or clearing powder from a mortar — in chemistry, biology and pharmacy practicals. Made of white, chemical-resistant porcelain and 120 mm long, it matches the porcelain mortars and dishes it is usually used with. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Spoon-Shoulder (Porcelain Spatula) Used For?

The spatula earns its place at the end of a practical as much as at the start. After crystallisation it gathers crystals from the filter paper or the rim of an evaporating dish without crushing them; after grinding it clears the last powder from the walls of a mortar; and in biology food tests it portions starch, sugar or salt into test tubes. In pharmacy practicals, the flat of the spoon helps work small quantities of a paste or ointment base, which is why it features in educational laboratory equipment orders across India.

Porcelain is hard but brittle, so tap the spatula gently against glass rims rather than striking them, and never use it to prise off lids. Rinse it in water after each use, dry it on a clean tissue and store it in a tray apart from metal tools, which can chip it. It is not meant for heating in a flame; a deflagrating spoon does that job.

OEM Manufacturer

Jain Scientific Equipments Private Limited, whose trading name is ScienceLab, is the OEM for Spoon- shoulder and makes it at its own licensed factory at Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers buy it directly from the manufacturer rather than through intermediaries, so class-set orders and later replacements are quoted at source — just ask us. Background on the company is on the ScienceLab company profile.

Related Laboratory Equipment

These items are commonly used with a porcelain spatula when handling solids:

• Spoon Spatula — another porcelain spoon spatula listing.
• Spoons for Substances — a stainless steel alternative for heavier daily handling.
• Porcelain Mortar with Crusher — for grinding solids before transferring them.
• Watch Glass — to hold measured portions.

See the Laboratory Equipment category for more tools and porcelain ware.

Frequently Asked Questions

What is Spoon- shoulder?
Spoon- shoulder is ScienceLab's catalogue name for a porcelain spoon spatula: a 120 mm white porcelain tool for scooping, scraping and transferring powders, crystals and pastes. The listing name comes from our original catalogue, but the item is used as a standard laboratory spatula.

What are its length and material?
Spoon- shoulder is made of white porcelain and measures 120 mm in length. The porcelain is chemical resistant, and its white surface makes stains from coloured reagents obvious at a glance before the spatula is used for the next substance.

When should I choose porcelain over steel?
Choose Spoon- shoulder when a non-metal tool is preferred, for example with substances you do not want in contact with steel, or when working alongside porcelain dishes and mortars. For heavy daily handling, a stainless steel spoon such as Spoons for Substances is the sturdier option.

Who manufactures Spoon- shoulder?
Spoon- shoulder is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory in Saha, Ambala, Haryana, India. Schools, colleges, dealers and importers order it factory-direct, and quotations are prepared by the manufacturer itself.

How should it be cared for?
Rinse Spoon- shoulder in water after each use, dry it on a clean tissue and store it apart from metal tools so it is not chipped. Do not use it to lever lids or heat it in a flame, as porcelain is brittle under impact and sudden temperature change.

What should a quotation request include?
When requesting a quote for Spoon- shoulder, state the quantity, your delivery location and any mortars, spoons or watch glasses to be priced together. Schools, colleges, dealers and importers in India and international markets receive quotations directly from the manufacturer through the contact page.

Request a Quote

Request pricing for Spoon- shoulder through the contact page or add it to the enquiry cart; the manufacturer sends the quotation directly.

Last updated: 24 September 2026

Triangles for placing pots (Product Code: SCI-547/040) is a three-legged laboratory stand with a triangular top, used to hold beakers, flasks and similar pots steady above a flame in school and college laboratories. Teachers use it as a heating platform; its legs bend outwards for stability and end in plastic caps that protect the bench. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India — a tripod stand for lab use in India and abroad.

Specifications

What Is the Tripod Stand for Placing Pots Used For?

This stand is the standard support for heating in a practical class. A Bunsen burner or spirit lamp goes underneath, a wire gauze is laid across the triangular top, and the beaker or flask rests on the gauze. Typical tasks include boiling water, warming a solution, dissolving a solid faster and keeping a water bath hot for test tubes.

Set the stand on a heat-resistant bench, centre the flame under the vessel and keep the plastic-capped feet away from the flame and from hot spills. The metal stays hot after the burner is switched off, so let it cool before moving it. Schools equipping benches with a Bunsen burner, wire gauze and tripod as a set can order the matching items listed below.

What to Specify When Ordering

• Which top version you want (mild steel wire or cast iron), since both appear in the listing
• Number of stands — usually one per student group or bench position
• Whether wire gauzes and burners should be quoted in the same order

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the original equipment manufacturer of this stand. It is produced at the company’s own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and goes factory-direct to schools, colleges, institutions, dealers and importers. If you need replacement stands or a repeat order that matches an earlier batch, ask us — the manufacturer handles it itself. More about the company is on our company profile.

Related Laboratory Equipment

These items complete a heating setup built around the stand:

• Gauze Wire, Ceramic Centre — laid across the triangular top to spread heat under a beaker
• Bunsen Burner — the gas flame placed beneath the stand
• Glass Spirit Lamp — a flame source for rooms without a gas line
• Chemical Beaker 250 ml — borosilicate vessel commonly heated on the stand
• Tripod Stand 200mm — a separate tripod listing to compare before ordering

See more bench apparatus in our Laboratory Equipment range.

Frequently Asked Questions

What are the Triangles for placing pots made of?
The Triangles for placing pots stand has painted mild steel legs, zinc coated and bent outwards for stability, with plastic caps on the leg ends. The listing describes the triangular top both as mild steel wire and as cast iron, so the top version is confirmed on your quotation.

Can a beaker be heated directly on the Triangles for placing pots?
Place a wire gauze across the triangular top of the Triangles for placing pots stand before heating a beaker or flask. The gauze spreads the flame and gives the glassware a flat, even seat, while the burner or spirit lamp sits directly underneath.

Will this tripod stand scratch the laboratory bench?
No. The lower ends of the legs on the Triangles for placing pots stand are covered with plastic caps that protect the work surface from scratches. Keep those caps clear of the flame and of hot spills, because plastic softens when it gets hot.

Who manufactures the Triangles for placing pots?
The Triangles for placing pots stand is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer that makes it at its own licensed factory at Saha, Ambala, Haryana, India. Quotations, repeat orders and replacement queries are answered directly by the manufacturer.

What is the height of the Triangles for placing pots?
The height of the Triangles for placing pots stand is not stated in the current listing. Tell us which burner or lamp you use through our contact page and we will confirm the dimensions of the stand we quote.

Can schools and dealers order this stand in bulk?
Yes. The Triangles for placing pots stand can be quoted in quantity for school and college labs, dealers and importers in India and international markets. Include the number of stands and the delivery location in your enquiry so we can prepare an accurate quotation.

Request a Quote

To order the Triangles for placing pots stand, send your quantity and delivery details through our contact page or add it to the enquiry cart. Your quotation comes straight from the manufacturer, with no trading intermediary in between.

Last updated: 24 September 2026

Gloves - Protective (Product Code: SCI-744/041) are disposable latex hand gloves used to protect the hands from soap, detergent, oil, unclean water and particles during laboratory and general handling work. They are single-use, ambidextrous, non-powdered and non-sterile, and are listed for hospital, dental, laboratory, food and industrial use. They are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India, as part of its range of disposable lab consumables.

Key Details

What Are Protective Latex Gloves Used For?

In a school or college laboratory these gloves cover everyday wet and messy jobs: washing glassware in detergent, wiping down benches, handling specimens and stained slides, and preparing food-science samples. Because they fit either hand, a lab can keep one stock for students and staff alike.

Check each glove for tears before putting it on, and remove it by peeling from the cuff so the outer surface ends up inside. Discard the gloves after one task instead of washing them. Latex resistance varies from chemical to chemical, so for concentrated acids, alkalis or solvents consult the reagent’s safety data sheet and consider a dedicated chemical-resistant glove.

What to Specify When Ordering

• Number of gloves or pairs needed — pack quantities are confirmed on the quotation
• Hand sizes required for your students and staff
• Confirmation that non-sterile gloves suit your procedures
• Confirmation that every user can wear latex

Supplier

These gloves are supplied by Jain Scientific Equipments Private Limited, which trades as ScienceLab from Ambala, Haryana. Schools, colleges and institutions often add safety consumables such as gloves to the same enquiry as their laboratory apparatus, so one quotation covers the whole order. Dealers and importers in India and international markets can request them in the same way. Read more on our company profile.

Related Laboratory Equipment

Personal protection items often ordered with these gloves:

• Gloves - Protective disposable — a second disposable glove listing to compare
• Gloves, Chemical Resistant — for work with stronger reagents
• Protective Laboratory Masks — single-use face protection against dust
• Laboratory Protective Glass — impact-resistant eye protection for practical work

Browse the full Laboratory Equipment category for more lab essentials.

Frequently Asked Questions

Are the Gloves - Protective powdered or sterile?
The Gloves - Protective are non-powdered and non-sterile. They suit routine laboratory, cleaning and handling tasks. If a procedure specifically requires sterile gloves, say so in your enquiry so we can discuss a suitable option before you order.

What material are the Gloves - Protective made from?
The Gloves - Protective are made of latex, which combines strength with flexibility, and are anatomically shaped for comfort. Although the listing describes them as hypoallergenic, anyone with a known latex allergy should not wear latex gloves, so check this before ordering for a class or staff team.

Can these gloves be used with laboratory chemicals?
The Gloves - Protective are described as chemical resistant and protect hands from soap, detergent, oil and unclean water. Latex resistance differs between chemicals, so for concentrated acids, alkalis or solvents check the reagent’s safety data sheet and consider a dedicated chemical-resistant glove.

Can the Gloves - Protective be worn on either hand?
Yes. The Gloves - Protective are ambidextrous, so each glove fits the left or the right hand. This keeps stocking simple for classes and staff, and a single torn glove can be replaced without having to find its matching partner.

Are the Gloves - Protective reusable?
No. The Gloves - Protective are disposable and meant for single use. Peel them off from the cuff so the outer surface turns inside out, discard them after the task, and put on a fresh pair for the next job rather than washing and reusing them.

Who supplies the Gloves - Protective?
The Gloves - Protective are supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India. Schools, colleges, institutions and dealers in India and international markets can include them in an apparatus enquiry and receive one combined quotation.

Which sizes and pack quantities are available?
Sizes and pack quantities for the Gloves - Protective are not stated in the current listing. Send the hand sizes and number of gloves you need through our contact page, and the quotation will confirm exactly what can be supplied.

Request a Quote

For a quotation on the Gloves - Protective, share the quantity and hand sizes through our contact page, or add the item to the enquiry cart together with any other laboratory items you need.

Last updated: 24 September 2026