Pump Electric sbmr bh 18cbm/hr (Product Code: SLE/PRP/02) is a complete electric submersible borehole pump used to lift clean, non-aggressive groundwater from boreholes into tanks and water supply systems. Rated in its name at 18 cubic metres per hour, it runs on a directly coupled 3-phase 380/400 V, 50 Hz submersible motor of up to 7.5 kW, with stainless steel hydraulics and built-in dry-running protection. The pump is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India.
| Parameter | Detail |
|---|---|
| Pump type | Complete electric submersible borehole pump |
| Rated flow | 18 m³/h, as stated in the product name |
| Water type | Non-aggressive water without solid particles |
| Motor | 3-phase submersible motor, directly coupled; maximum 7.5 kW |
| Power supply | 380 V/400 V, 50 Hz, 3-phase |
| Stator winding | Embedded, hermetically enclosed in stainless steel |
| Enclosure class | IP 58 |
| Dry-running protection | Built-in protection device, including level relay electrodes |
| Body, shaft, impellers and diffusers | Stainless steel |
| Bearings | Water-lubricated, in glass-fibre-impregnated thermoplastic resin/stainless steel |
| Fittings | Priming screw, top non-return valve, bottom inlet strainer |
| Cabling | Complete with motor cable |
| Product code | SLE/PRP/02 |
| Supplied by | Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India |
A submersible borehole pump sits down the borehole below the water level and pushes water up the rising main to an elevated tank, a distribution network or a water point. It suits piped water schemes for villages, schools, health centres and small towns wherever a 3-phase supply or a suitable generator is available, and it avoids the suction-lift limits of a surface pump.
Because the pump is meant for non-aggressive water without solid particles, develop the borehole and clear sand before installation, and keep the pump clear of the bottom of the hole. Set the level relay electrodes of the dry-running protection above the pump intake so the motor stops before the water falls too low. A qualified electrician should connect the 3-phase supply and check the direction of rotation at start-up.
ScienceLab, the trading name of Jain Scientific Equipments Private Limited, supplies this submersible borehole pump from Ambala, Haryana, as sourced water-supply equipment. Water utilities, WASH programmes, drilling contractors, NGOs and distributors can request it together with handpumps, fittings and other water supply items for India and international markets. More about the company appears on the ScienceLab profile page.
Pumps and pipework used alongside a borehole pump in water supply schemes:
Browse the complete Water, Sanitation & Hygiene Supplies category.
What does sbmr bh mean in Pump Electric sbmr bh 18cbm/hr?
In Pump Electric sbmr bh 18cbm/hr, "sbmr bh" is short for submersible borehole, and 18cbm/hr is the rated flow of 18 cubic metres per hour given in the product name. It is a complete electric pump designed to work down a borehole.
What power supply does the submersible borehole pump need?
The submersible borehole pump uses a 3-phase submersible motor for a 380 V/400 V, 50 Hz, 3-phase supply, with a motor rating of up to 7.5 kW. A single-phase version is not listed, so confirm your site power with us before ordering.
What water can the 18 cbm/hr submersible pump handle?
The 18 cbm/hr submersible pump is intended for non-aggressive water without solid particles. Sandy or corrosive water can shorten the life of pumps like this, so boreholes should be developed and cleared of sand, and the water quality checked, before installation.
How is the borehole pump protected against running dry?
Pump Electric sbmr bh 18cbm/hr has a built-in dry-running protection device, including level relay electrodes, that stops the motor when the water level drops too far. Its stator winding is hermetically enclosed in stainless steel, and the enclosure class is IP 58.
What is included with Pump Electric sbmr bh 18cbm/hr?
Pump Electric sbmr bh 18cbm/hr is a complete pump and motor unit with a priming screw, top non-return valve, bottom inlet strainer, water-lubricated bearings and motor cable. Rising main pipe, control panel and other installation items are not listed, so ask us about them.
Who supplies Pump Electric sbmr bh 18cbm/hr?
Pump Electric sbmr bh 18cbm/hr is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, as sourced water-supply equipment. Utilities, WASH programmes, drilling contractors and distributors in India and international markets can request a quotation through the contact page.
To price Pump Electric sbmr bh 18cbm/hr, send your site power, borehole details and cable length via the ScienceLab contact page, or add the pump to the enquiry cart with pipe fittings and other WASH supplies.
Last updated: 24 September 2026