Burner Tirrill (Product Code: SLE/B/15) is a Tirrill-pattern laboratory gas burner used for hotter heating work, such as crucible ignitions and glass bending, in senior school, college and analytical teaching labs. Both supplies can be adjusted, gas through a brass needle valve and air through adjustable air ports, and balancing the two gives a flame that can reach up to 1550°C. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Tirrill Burner Used For?

The extra heat helps wherever a plain Bunsen flame is slow: heating a crucible to constant mass when finding water of crystallisation, igniting precipitates in gravimetric analysis, burning magnesium ribbon in oxide-formation experiments and softening glass tubing for simple bends. Light the burner with the needle valve partly open, then widen the air ports until the inner blue cone is sharp and well defined; the hottest zone lies just above the tip of that cone.

For crucible work, rest the crucible in a pipe-clay triangle on a tripod and lift it only with crucible tongs once heating is complete. Keep the burner tubing clear of the base while the flame is high, and let the tube cool before the burner is handled or stored. Colleges building up their chemistry lab equipment often keep a few Tirrill burners alongside standard Bunsen models.

OEM Manufacturer

This Tirrill burner is an OEM product of Jain Scientific Equipments Private Limited, trading as ScienceLab. The company makes it at its own licensed factory at Saha, Ambala, Haryana, India, and sells it straight from the factory to schools, colleges, analytical teaching labs, dealers and importers, instead of passing it through a trader. For replacement parts or further burners to match an existing set, ask us and the manufacturer will respond directly. Find out more on the company profile page.

Related Laboratory Equipment

Items used in high-temperature heating with this burner:

• Crucible with lid — porcelain crucible for heating solids to constant mass.
• Clay Pipe Triangle — supports the crucible directly in the flame.
• Crucible Tong — for lifting the hot crucible safely.
• Burner Tubing — gas connection from the bench tap.
• Meker Burner — for broader, even heating across a grid.

All our burners are grouped on the Burners category page.

Frequently Asked Questions

How hot does the Tirrill burner get?
The Burner Tirrill (SLE/B/15) can reach up to 1550°C. Temperature varies across any gas flame, and on this burner the hottest zone lies just above the tip of the inner blue cone once the gas and air are balanced.

How does the Burner Tirrill differ from a standard Bunsen burner?
On the Burner Tirrill, both the gas supply (through the brass needle valve) and the air supply (through the adjustable air ports) can be regulated. That allows a better-balanced gas-air mixture and a hotter flame than a simple Bunsen burner.

What is the needle valve on the Burner Tirrill made of?
The needle valve that adjusts the gas supply on the Burner Tirrill is made of brass. For details of other parts or materials that your purchasing specification requires, ask us through the contact page before ordering.

Is gas tubing supplied with the Burner Tirrill?
Tubing is not listed as included with the Burner Tirrill. Order Burner Tubing in the length that suits your bench, and it can be quoted together with the burners in a single enquiry.

Can the Burner Tirrill be used with LPG?
The gas type is not stated in our product details for the Burner Tirrill. Tell us whether your laboratory is supplied with natural gas or LPG so we can confirm suitability before the burners are dispatched.

Who manufactures the Burner Tirrill?
Jain Scientific Equipments Pvt Ltd, trading as ScienceLab, is the OEM manufacturer of the Burner Tirrill. It is made at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to colleges and dealers in India and international markets.

How do I order Tirrill burners for a college or export customer?
For the Burner Tirrill, send the quantity, gas type and delivery destination through the contact page or add the burner to the enquiry cart. The quotation is then prepared and sent directly by the manufacturer.

Request a Quote

To receive a quotation for the Burner Tirrill, contact us or add it to your enquiry cart together with crucibles and tongs.

Last updated: 24 September 2026

Micro Bunsen Burner (Product Code: SLE/B/16) is a miniature gas burner, 9 cm high, used to give a small, closely controlled flame in school, college and microbiology laboratories. Teachers and technicians pick it for aseptic work and micro-scale heating, where a fine gas control needle, an adjustable air regulator and a built-in flame retainer keep a tiny flame steady. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its biology lab equipment range.

Specifications

What Is the Micro Bunsen Burner Used For?

Micro burners are chosen where a full-size flame would be wasteful or awkward: flaming inoculating loops and the necks of culture bottles beside a Petri dish, warming a drop of reagent in a small test tube, micro-scale chemistry, and heating capillary tubes or fine glass. The compact height also lets the burner sit in tight spaces, for example under small apparatus or on crowded benches in junior science labs.

Set the fine needle to a low gas flow before lighting, then open the air regulator until the flame shows a small, sharp blue cone. The flame retainer helps the flame stay in place at these low settings, which is why the burner is a handy piece of microbiology lab equipment in India for inoculation benches. Keep paper and alcohol-soaked swabs away from the flame and shut the gas at the tap when finished.

OEM Manufacturer

ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM (original equipment manufacturer) of this micro burner. It is made and assembled at the company's own licensed factory at Saha, Ambala, Haryana, India, rather than bought in from a trader, and it goes factory-direct to schools, colleges, dealers and importers. The company is incorporated under CIN U29309HR2020PTC087597, and production takes place at 449, HSIIDC Industrial Area, Saha, Ambala under Factory Licence AMB-ONLINE-CHD-J-414. Read more on the company profile.

Related Laboratory Equipment

Items used with a micro burner in small-flame and aseptic work:

• Burner Tubing — connects the burner to the gas tap
• Micro Burner — another small burner, with a rotatable air regulator
• Glass Spirit Lamp — a small-flame option for rooms without a gas supply
• Petri Dish Glass With Lid — culture plates handled beside the flame
• Test Tube Holder — for warming small tubes safely

Full-size and specialist burners are listed in the Burners category.

Frequently Asked Questions

How small is the Micro Bunsen Burner?
The Micro Bunsen Burner stands just 9 cm high, much smaller than a standard bench Bunsen burner, so it fits under small apparatus, beside Petri dishes and on crowded student benches where a full-size burner would be awkward.

When should I choose a micro burner instead of a standard Bunsen burner?
Choose the Micro Bunsen Burner when the job needs a small, precise flame: flaming inoculating loops, micro-scale reactions, warming a few drops in a small tube, or heating capillaries. For beakers and flasks on a tripod, a full-size burner such as our Bunsen Burners is more suitable.

How is the flame of the Micro Bunsen Burner adjusted?
Gas flow on the Micro Bunsen Burner is set with its fine gas control needle and air with the adjustable air regulator. The built-in flame retainer then holds the resulting small flame steady, even at low settings where an ordinary burner flame could lift or go out.

Which fuel gas does the Micro Bunsen Burner use?
The fuel gas for the Micro Bunsen Burner is not specified in our product details. Tell us whether your laboratory uses natural gas or LPG, and we will confirm the correct set-up before we send a quotation.

Who manufactures the Micro Bunsen Burner?
The Micro Bunsen Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Buyers deal with the manufacturer directly for quotations and repeat orders, and can ask us about replacement parts.

Is a test or calibration certificate available for the Micro Bunsen Burner?
Any documentation your institution needs for the Micro Bunsen Burner, including whether a test or calibration certificate can be provided, should be discussed with us when you request a quotation, so we can confirm what is available.

Can the Micro Bunsen Burner be ordered in bulk or for export?
Yes. The Micro Bunsen Burner is supplied in class-set and larger quantities to schools, colleges, laboratories and distributors in India and international markets. Include the quantity, fuel gas and delivery location in your enquiry for a complete quotation.

Request a Quote

Quotations for the Micro Bunsen Burner come straight from the manufacturer. Contact us or add the burner to the enquiry cart, stating the quantity and fuel gas you use.

Last updated: 24 September 2026

Super Floating Magnets Set (Product Code: SLE/MG/10) is a floating-magnet demonstration set used to show magnetic repulsion, where like poles push magnets apart so they appear to hover, in school science lessons. It suits teachers who want a quick, visual way to show that magnetic force acts without contact, and it also works well as a science fair project kit in India. It is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, India; contents are confirmed with each quotation.

Key Details

What Is a Floating Magnets Set Used For?

Floating magnets are one of the quickest ways to make an invisible force obvious. In a typical floating-magnet demonstration, ring magnets are placed on a vertical guide with like poles facing, so each magnet rests in mid-air above the one beneath it. Students can push a magnet down and feel the resistance grow as the gap closes, compare the spacing at the lower and upper ends of the stack, and turn a magnet over to watch repulsion change to attraction.

These observations lead naturally into discussion of balanced forces, since the magnetic push matches the weight of the magnets above. The same set can support a class investigation or a science fair display. Handle the magnets gently, as magnets can chip if allowed to snap together.

Supplier

The Super Floating Magnets Set is supplied by Jain Scientific Equipments Private Limited, the company that trades as ScienceLab in Ambala, Haryana, India. It sources the set for schools, science centres and dealers, and confirms the current contents of the set with every quotation so buyers know exactly what they will receive.

If you are building several demonstration stations, the set can be quoted together with loose ring magnets and other magnetism items. See our company profile for more about the business.

Related Magnets

Products for repulsion and levitation demonstrations:

• Magnets, Ring — loose ceramic ring magnets for building your own floating stacks.
• Floating Magnets – Coloured — coloured ceramic rings on a wooden pole.
• Magnetic Activity Kit — covers levitation by repulsion and other magnet properties.
• Magnetic Repulsion — apparatus for measuring repulsive force at different separations.

Explore more teaching magnets in the Magnets category.

Frequently Asked Questions

What does the Super Floating Magnets Set demonstrate?
The Super Floating Magnets Set (SLE/MG/10) demonstrates magnetic repulsion. With like poles facing, the magnets push each other apart and appear to float, showing students that magnetic force acts across a gap without any contact.

What is included in the Super Floating Magnets Set?
The contents and sizes of the Super Floating Magnets Set are confirmed with each quotation rather than listed here. Please ask through our contact page and we will send the current contents before you place an order.

Which age groups is a floating magnets set suitable for?
A floating magnets set such as the Super Floating Magnets Set suits primary and middle-school magnetism lessons and science fair displays, with teacher supervision. Older students can extend it into discussions of balanced forces and field strength.

How should the floating magnets be handled?
Handle the magnets in the Super Floating Magnets Set gently and avoid letting them snap together, as magnets can chip. Keep them away from phones and cards, and store them with like poles apart or with a spacer between them.

Who supplies the Super Floating Magnets Set?
The Super Floating Magnets Set (SLE/MG/10) is supplied by Jain Scientific Equipments Pvt Ltd (ScienceLab), Ambala, Haryana, India, to schools, science centres and dealers in India and international markets.

Request a Quote

Request a quotation, including the confirmed set contents, through our contact page, or add the Super Floating Magnets Set to the enquiry cart.

Last updated: 24 September 2026

High Temperature Burner (Product Code: SLE/B/17) is a gas burner fed with compressed air, used to produce a short, wide and uniformly high-temperature flame for strong heating in analytical, engineering and chemistry laboratories. A special micrometer needle valve meters the gas, compressed air enters a plated, injector-shaped venturi tube at 5 PSI, and a safety cap guards against dangerous back flashes. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the High Temperature Burner Used For?

Forcing compressed air into the venturi gives a far more intense flame than a burner that draws air in naturally, and the short, wide shape spreads that heat evenly under large crucibles, dishes and metal specimens. Typical applications include fusions and ignitions in analytical labs, heating larger samples to high temperature, and glass or metal working demonstrations. In engineering lab equipment set-ups in India, such as materials and metallurgy training rooms, it offers bench-scale high-temperature heating without a furnace.

Connect a regulated compressed-air line set to 5 PSI and the gas supply, open the gas slightly with the micrometer valve, light it, then introduce air gradually until the flame becomes short and intensely blue. Wear eye protection, keep the area around the burner clear of combustibles, and shut off the gas before the air when finishing.

OEM Manufacturer

Jain Scientific Equipments Private Limited, which trades as ScienceLab, is the original equipment manufacturer (OEM) of this compressed-air burner and produces it at its own licensed factory at Saha, Ambala, Haryana, India. Because the burner comes from its maker rather than a reseller, laboratories, engineering colleges, dealers and importers buy it factory-direct, and questions about fittings or replacement parts are answered by the people who build it. Background on the company is on the company profile.

Related Laboratory Equipment

Alternatives and accessories for high-temperature work:

• Burner, High-Temperature Natural Gas — a Meker-type hot burner that does not need compressed air
• Meker Burner — another high-heat option for crucible work
• Burner Tubing — gas connection to the burner
• Crucible Tong — stainless steel tong for handling hot crucibles
• Safety Goggles — eye protection when working near an intense flame

Explore the Burners category for other designs.

Frequently Asked Questions

Does the High Temperature Burner need compressed air?
Yes. The High Temperature Burner has a direct feed inlet for compressed air and operates on 5 PSI air pressure. An air source is not listed as part of the product, so plan for a regulated compressed-air line or a small compressor at the bench.

Which gases can the High Temperature Burner burn?
The High Temperature Burner is designed to burn all gases in large volume. If you would like advice on setting it up for your particular fuel gas, share the details through our contact page before ordering.

What does the safety cap on the High Temperature Burner do?
The safety cap on the High Temperature Burner prevents dangerous back flashes, where the flame travels back into the burner tube. It is an important feature on a burner that mixes fuel gas with forced compressed air in large volume.

What is supplied with the High Temperature Burner?
The High Temperature Burner is supplied complete with its die-cast alloy, plated octagonal base. Gas tubing and the compressed-air supply are not listed as part of the product, so order tubing separately and arrange a regulated air line at the bench.

What is the maximum flame temperature of the High Temperature Burner?
A maximum temperature figure is not given in our product details for the High Temperature Burner; it is described as giving a short, wide and uniformly high-temperature flame. Contact us if your application needs a stated figure.

Who manufactures the High Temperature Burner?
The High Temperature Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes it at its own factory in Saha, Ambala, Haryana, India. Quotations, repeat orders and spare-part questions are handled by the manufacturer itself.

Can the High Temperature Burner be quoted for institutions and export?
Yes. The High Temperature Burner is quoted for colleges, analytical laboratories, training institutes and distributors in India and international markets. Send the quantity, your fuel gas and the delivery location, and the quotation will come directly from the manufacturer.

Request a Quote

For High Temperature Burner pricing direct from the manufacturer, use our contact page or add the burner to the enquiry cart.

Last updated: 24 September 2026

Meker Burner (Product Code: SLE/B/18) is a high-heat laboratory gas burner used to heat crucibles, dishes and samples strongly and evenly in analytical, college and research laboratories. It is rated for temperatures up to 1750°C and sits on a one-piece die-cast base carrying its own gas and air regulators. The burner is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as part of its scientific laboratory equipment range.

Specifications

What Is the Meker Burner Used For?

Meker burners are the usual choice for igniting precipitates to constant mass, heating crucibles red hot, fusing samples and driving off water from hydrated salts quickly. The wide, even flame heats the whole base of a crucible or evaporating dish at once, so samples reach temperature faster and more uniformly than over a Bunsen flame, which makes this burner a staple of college chemistry lab equipment in India.

Set the gas regulator first, light the burner, then open the air regulator until the flame is at its hottest and least luminous. Support crucibles on a pipe-clay triangle, keep the one-piece base on a clear, heat-resistant surface, and allow the burner head to cool fully before it is touched after a long run at high temperature.

OEM Manufacturer

ScienceLab is the brand under which Jain Scientific Equipments Private Limited makes this burner. The company is its OEM (original equipment manufacturer), and the burner is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, not sourced from a trading house. Colleges, research institutes, dealers and importers therefore receive quotations straight from the manufacturer, and repeat orders for matching burners come from the same source. See the company profile for more about the company.

Related Burners

Other Meker designs and the accessories used for crucible heating:

• Meker Burner Heavy Base — a Meker variant on a heavy wide base
• Economy Burner Meker — a lower-cost Meker option
• Crucible with lid — porcelain crucible for ignitions
• Clay Pipe Triangle — holds the crucible in the flame
• Burner Tubing — gas supply line

Compare all burners on the Burners category page.

Frequently Asked Questions

How hot does the Meker Burner get?
The Meker Burner is rated for temperatures up to 1750°C. The temperature reached in practice depends on the gas supply and on how the separate gas and air regulators are set, so adjust both for the hottest, least luminous flame.

Should I choose a Meker Burner or a Bunsen burner?
Choose the Meker Burner for strong, even heating of crucibles and evaporating dishes, such as igniting precipitates. A Bunsen burner remains the practical choice for general heating of test tubes and beakers on a school bench, where such high temperatures are not needed.

How are gas and air controlled on the Meker Burner?
The Meker Burner has separate gas and air regulators on its one-piece die-cast base. Setting the gas first and then opening the air lets the user tune the mixture until the flame is at its hottest and most even.

How does the Meker Burner compare with the Heavy Base and Economy models?
All three are Meker-type burners. This Meker Burner is the model with a stated rating of up to 1750°C and a one-piece die-cast base; the Heavy Base and Economy versions differ in base and construction.

Which gas is the Meker Burner set up for?
The fuel gas for the Meker Burner is not stated in our product details. Tell us whether your laboratory uses natural gas or LPG when you enquire, and we will confirm the right configuration before quoting.

Who manufactures the Meker Burner?
The Meker Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab) as the OEM, at its own factory in Saha, Ambala, Haryana, India. Laboratories deal directly with the manufacturer for pricing, repeat orders and any replacement-part enquiries.

Can you supply Meker Burners for a college lab or export order?
Yes. The Meker Burner is supplied to colleges, research laboratories and distributors in India and international markets, in single units or bench quantities. Send your quantity, fuel gas and delivery location through the contact page or enquiry cart.

Request a Quote

Meker Burner prices are quoted directly by the manufacturer: contact us or add the burner to your enquiry cart.

Last updated: 24 September 2026

Teclu Burner (Product Code: SLE/B/19) is a natural gas burner used to produce a very hot flame for glasswork, soldering and general heating in physics, chemistry and workshop teaching labs. Its conical mixing section, screwed air regulator and gas control needle blend gas and air thoroughly above a 125 x 13 mm burner tube. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, and sits in its school lab equipment range for Indian and international buyers.

Specifications

What Is the Teclu Burner Used For?

In glasswork the Teclu burner is used to soften, bend and seal glass tubing, draw out jets and fire-polish cut ends before they are fitted into stoppers for gas-collection and distillation set-ups. Its hot flame also suits soldering tasks, which makes it a useful item of physics lab equipment in India for electrical and workshop practicals, alongside general heating of test tubes, beakers and crucibles.

Set the gas control needle, light the burner, then turn the screwed air regulator until the flame shows a sharp blue inner cone. When bending tubing, rotate the glass evenly in the hottest part of the flame and let it cool on a heat-resistant mat rather than on the bench. The 80 mm base keeps the burner steady while you work with both hands.

OEM Manufacturer

The Teclu Burner is an original ScienceLab product. Jain Scientific Equipments Private Limited, which trades as ScienceLab, is its OEM (original equipment manufacturer) and makes it at its own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges, dealers and importers buy it factory-direct and can ask the maker itself about spares or repeat batches. The company is a registered MSME (Udyam UDYAM-HR-01-0003714), and its export shipments are handled under Importer-Exporter Code AAECJ8618A issued by the DGFT. More background is on our company profile.

Related Laboratory Equipment

Items used with the Teclu burner in glassworking practicals:

• Borosilicate Glass Tubing — tubing to bend, draw and seal in the flame
• Glass Tubing Cutter — scores tubing to length before flame work
• Flame Spreader — a fishtail-flame top for glass working; ask us about fit
• Burner Tubing — flexible gas line to the bench tap
• Gas Lighter, Piezo Electric — lights the burner without matches

Find other burner types in the Burners category.

Frequently Asked Questions

What are the main dimensions of the Teclu Burner?
The Teclu Burner has a burner tube of 125 x 13 mm (height x diameter), a base 80 mm in diameter and a 9 mm gas inlet. The compact base keeps it steady on the bench while both hands are free for glasswork.

Why does the Teclu Burner give a hotter flame than a basic Bunsen burner?
The Teclu Burner has a conical mixing section, a screwed air regulator and a gas control needle, so gas and air are mixed thoroughly and adjusted finely. The result is a very hot flame suited to glasswork and soldering.

Is the Teclu Burner suitable for bending glass tubing?
Yes. The Teclu Burner's very hot flame is suitable for glasswork such as bending, sealing and fire-polishing glass tubing. Rotate the tube evenly in the hottest part of the flame and cool finished pieces on a heat-resistant mat.

Can the Teclu Burner be used with LPG?
The Teclu Burner is described as a natural gas burner. If your laboratory runs on LPG, contact us before ordering so that we can confirm whether a suitable configuration can be supplied for your gas.

What tubing fits the Teclu Burner's 9 mm inlet?
Use flexible gas tubing sized to grip a 9 mm inlet firmly. Ask us to confirm a matching tubing from our range when you order the Teclu Burner, and check the connection for cracks before each practical.

Who manufactures the Teclu Burner?
The Teclu Burner is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Quotations come directly from the manufacturer, which also handles repeat orders and questions about replacement parts.

Do you export the Teclu Burner?
Yes. The Teclu Burner is supplied to schools, colleges, institutions and distributors in India and international markets. Include the quantity, your fuel gas and the destination in your enquiry so the quotation covers everything you need.

Request a Quote

For a Teclu Burner quotation from the manufacturer, reach us through the contact page or add the burner to your enquiry cart.

Last updated: 24 September 2026

Bunsen Burner Pilot Flame (Product Code: SLE/B/20) is a Bunsen burner with a separate pilot light tube, used to keep a small flame alight between heating steps in school, college and routine testing laboratories. Because the main flame can be brought back without relighting, it saves time when the burner is needed only intermittently, while a sleeve-type regulator and stopcock give reliable gas control. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India.

Specifications

What Is the Bunsen Burner Pilot Flame Used For?

Many practicals alternate short bursts of heating with longer periods of observing, weighing or recording: repeated heating and cooling cycles, successive flame tests, sterilising a loop between transfers, or warming a tube for a few seconds before each reading. With a pilot flame, the main burner can be turned down between steps and brought back instantly, with no relighting and no fumbling for a lighter mid-experiment.

This makes it convenient for intermittent heating in a school chemistry lab and on shared benches where several students use one burner in turn. Adjust the pilot with its screw so it is small but stable, use the stopcock and sleeve regulator to set the main flame, and close the bench gas tap at the end of the session so both flames go out.

OEM Manufacturer

Jain Scientific Equipments Private Limited, trading as ScienceLab, is the OEM, or original equipment manufacturer, of the Bunsen Burner Pilot Flame. The burner, with its pilot tube, stopcock and chrome-plated base, is produced at the company's own licensed factory at Saha, Ambala, Haryana, India, and supplied factory-direct to schools, colleges, institutions and dealers. With no middleman involved, quotations, repeat orders and requests for replacement parts all go straight to the maker. Our company profile has more about who we are.

Related Burners

Useful items and alternatives for on-off heating work:

• Burner Tubing — the gas connection from the bench tap
• Bunsen Burner with Stopcock — stopcock control without the pilot tube
• Burner With Flame Stabilizer — a steady flame for draughty positions
• Test Tube Holder, Metal — for short, repeated heating of tubes
• Flame Test Of Chemicals Lab Investigation — a stop-start activity that benefits from a pilot

View all burners in the Burners category.

Frequently Asked Questions

How does the Bunsen Burner Pilot Flame save time?
The Bunsen Burner Pilot Flame keeps a small pilot alight while the main flame is turned down, so the burner can be brought back to full heat instantly between steps. There is no need to relight it with a lighter in the middle of an experiment.

How is the pilot flame adjusted?
The pilot light tube on the Bunsen Burner Pilot Flame has its own screw adjustment. Turn it until the pilot is small but stable, so that it stays alight without wasting gas while the main flame is off.

How is the main gas flow controlled?
The main flame of the Bunsen Burner Pilot Flame is controlled through a sleeve-type regulator and a stopcock. Together they give reliable gas control, letting students set the flame and turn it down between heating steps.

Can the pilot be left burning unattended?
No. Even though the Bunsen Burner Pilot Flame keeps only a small pilot alight, any lit burner must stay supervised. Close the bench gas tap at the end of the session so that both the pilot and the main flame go out.

What is the base of the Bunsen Burner Pilot Flame made of?
The base of the Bunsen Burner Pilot Flame is stamped steel with chrome plating. Wipe it with a damp cloth once the burner is cool and dry it afterwards; avoid abrasive cleaners that could scratch the plating.

Which gas is the Bunsen Burner Pilot Flame designed for?
The fuel gas for the Bunsen Burner Pilot Flame is not specified in our product details. Let us know whether your laboratory uses natural gas or LPG, and we will confirm the correct configuration before sending a quotation.

Who manufactures the Bunsen Burner Pilot Flame?
The Bunsen Burner Pilot Flame is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), which is the OEM and makes it at its own factory in Saha, Ambala, Haryana, India. Schools and dealers buy it factory-direct, with quotations issued by the manufacturer.

What should a school or college include in its enquiry?
When enquiring about the Bunsen Burner Pilot Flame, include the quantity, your fuel gas, any tubing needed and the delivery location in India or overseas. Send it through the contact page or enquiry cart for a quotation.

Request a Quote

Get a manufacturer's price for the Bunsen Burner Pilot Flame by contacting us or adding it to the enquiry cart.

Last updated: 24 September 2026

Meker Burner Heavy Base (Product Code: SLE/B/21) is a Meker-type gas burner used for high-temperature work such as crucible ignitions in chemistry and analytical laboratories. Its heavy, wide die-cast metal base, 80 mm across, carries a nickel-plated burner tube topped by a 25 mm perforated plate that gives a stable flame with high, evenly distributed temperature. It is made by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM manufacturer, at its own factory in Ambala, India, as chemistry lab equipment for India and international markets.

Specifications

What Is the Meker Burner Heavy Base Used For?

In analytical and inorganic practicals this burner is chosen when a standard Bunsen flame is not hot or wide enough: igniting precipitates in a crucible to constant mass, driving water of crystallisation out of salts, heating metal oxides, or bringing a hard-glass tube to a strong, uniform heat. Because the perforated plate spreads the flame across its full 25 mm width, a crucible sitting in a clay triangle is heated from below over its whole base rather than at a single hot spot.

Push the gas tubing fully over the riffled inlet, light the gas at the head, and then turn the air regulator gradually until the flame over the plate becomes short, blue and even. The wide 80 mm base keeps the burner steady under a tripod during long heating runs, which matters in a busy school chemistry lab equipment setup where benches are shared by several students.

OEM Manufacturer

The Meker Burner Heavy Base is built by its OEM (original equipment manufacturer), Jain Scientific Equipments Private Limited, which trades as ScienceLab. Production takes place at the company's own licensed factory at Saha, Ambala, Haryana, India, so schools, colleges, dealers and importers buy directly from the maker instead of through a trader. Questions about the heavy base, the perforated head or replacement parts are answered by the manufacturer itself. Read the company profile for background on the business and its product range.

Related Burners

Items that are commonly ordered with a Meker burner for high-temperature heating:

• Economy Burner Meker — a lower-cost Meker-type burner for routine heating on general benches
• Burner Tubing — flexible tubing to run gas from the bench tap to the riffled inlet
• Gas Lighter, Piezo Electric — lights the burner head without matches
• Tripod Cast Iron Varnished — holds a clay triangle, crucible or vessel above the flame
• Crucible with lid — for ignition and heating-to-constant-mass exercises

See every gas burner and flame accessory in our Burners range.

Frequently Asked Questions

Why choose the Meker Burner Heavy Base?
The Meker Burner Heavy Base has a wide die-cast metal base, 80 mm across, which gives it weight and a broad footprint. It is therefore less likely to be knocked over while a hot crucible or tripod is in use during long heating runs.

How is the flame of the Meker Burner Heavy Base adjusted?
On the Meker Burner Heavy Base, rotate the air regulator around the jet. Opening it admits more air for a hotter, bluer flame over the perforated plate; closing it gives a softer, more luminous flame for gentler heating.

Which fuel gas is the Meker Burner Heavy Base set up for?
The gas type and jet size of the Meker Burner Heavy Base are not stated in our current product information. Tell us whether your laboratory uses LPG or piped natural gas when you contact us, so we can confirm the correct configuration.

Is gas tubing included with the Meker Burner Heavy Base?
Tubing is not listed as part of the Meker Burner Heavy Base supply. It can be ordered separately, for example our Burner Tubing, which pushes onto the riffled gas inlet; please confirm the fit when you enquire.

How should the Meker Burner Heavy Base be looked after?
Let the Meker Burner Heavy Base cool completely, then clear the holes of the perforated plate with a soft brush if they become partly blocked, and wipe the nickel-plated tube with a dry cloth. Check the tubing on the inlet for cracks before each session.

Who manufactures the Meker Burner Heavy Base?
The Meker Burner Heavy Base is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own factory in Saha, Ambala, Haryana, India. Institutions and dealers buy it factory-direct, and quotations come straight from the manufacturer.

What should an institutional quotation request include?
For the Meker Burner Heavy Base, send the quantity, the fuel gas used in your laboratory, the delivery location in India or abroad, and any tender format you must follow. Bulk orders from schools, colleges and distributors are welcome.

Request a Quote

For pricing and delivery details direct from the manufacturer, contact us or add the Meker Burner Heavy Base to your enquiry cart.

Last updated: 24 September 2026