Sectioned for teaching, the FF Auto Transmission Stand Type shows an FF automatic transmission with 4 forward speeds and 1 reverse, together with its cut-open torque converter. Each incised section carries its own colour of vehicle paint. The unit weighs about 60 kg and sits on a steel stand with 4-inch urethane castor wheels, so it can be wheeled between rooms.
| Parameter | Detail |
|---|---|
| Composition | FF automatic transmission, torque converter |
| Gears | 4-speed forward, 1-speed reverse |
| Torque converter | Incised (cut open) for structure education |
| Stand | Steel stand, 4 wheel caster with 4-inch urethane wheels |
| Finish | Vehicle paint for painting and coating; each incised section painted a different colour |
| Weight | Approx. 60 kg |
| Size | Approx. 800 × 600 × 1,000 mm |
| Product code | SLE/ATE/08 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Naming the converter parts. On the incised torque converter, students find the impeller driven by the engine, the turbine that drives the gearbox and the stator between them, using the colours to tell them apart. Each student then writes one line on what that part does as the car pulls away.
Standing still in gear. Ask why an automatic car can idle in drive while held on the brake. Then compare the answer with the friction clutch on the clutch structure trainer hydraulic manual, which the driver must disengage with the pedal before the car can stop in gear.
Four ratios and reverse. Students trace the sectioned parts that give the four forward speeds and reverse. They then turn to the cut model of planetary gear system to see how holding one member of a gear set changes the ratio.
The automatic in a full driveline. Close with the CRDI diesel engine power train system automatic transmission, where an automatic gearbox works inside a complete power train.
It sits between the turbine and the impeller. At low speed, oil leaving the turbine would strike the impeller against its rotation; the stator vanes turn that oil so it helps the impeller instead, which multiplies torque. A one-way clutch holds the stator still then and lets it freewheel later.
It is the moment when the turbine has nearly caught up with the impeller. Torque multiplication ends, the stator starts to freewheel on its one-way clutch, and the converter then works as a plain fluid coupling until the lock-up clutch, if fitted, closes.
A fluid flywheel has only an impeller and a turbine, so it passes torque on without multiplying it. Adding a stator turns it into a torque converter, which can multiply torque when pulling away. Both let the engine idle while the vehicle stands still in gear.
Low fluid is the most common cause, so check level and condition first, using the method the vehicle maker gives for that gearbox. Then look for leaks at the pan, seals and cooler lines. If the fluid is correct, worn clutch packs, a faulty shift solenoid or valve body trouble are the next suspects.
Healthy automatic fluid is usually red or pink, clear and mild in smell. Burnt fluid turns dark brown or black, smells scorched and may carry particles of friction material. It shows that the gearbox has run hot or that clutches have slipped, so change the fluid and find the cause.
Oil pressure applies clutch packs, and in many designs brake bands, to hold or join parts of the gear train. Each combination of applied elements gives one ratio, so five combinations give the four forward speeds and reverse. On the sectioned unit, the colour coding helps students pick out the parts behind each ratio.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 14 November 2026