The Excavator VR Simulator trains new operators to drive and dig on an orbital-type, endless-track excavator platform before they sit in a real machine. It turns through 360 degrees without limit, adds 1-axis pitch motion and uses excavator joystick levers of the real-equipment type, with 55-inch Full HD displays.
| Parameter | Detail |
|---|---|
| Simulator type | Orbital-type, endless-track excavator simulator |
| Rotation | 360 degree infinite rotation function |
| Motion | 1-axis motion (pitch), for functional test training |
| Running lever | Orbital type, 2-axis |
| Operator controls | Excavator joystick levers as used in real equipment |
| Display | 55-inch Full HD; horizontal type and vertical type both listed |
| Training content | Driving test and excavation test training in an actual test-site environment |
| Training video | For the functional exam (driving, digging) |
| Versions | Two excavator training simulators listed; configuration confirmed at enquiry |
| Product code | SLE/ATE/29 |
| Minimum order | 10 units |
| Dispatch | Usually within 7 to 10 working days |
| Manufacturer | ScienceLab (Jain Scientific Equipments Pvt Ltd), Ambala, India |
Lever familiarisation. Trainees move one function at a time: swing, boom, arm and bucket, then the 2-axis running lever for travel. When each movement is smooth they combine two, such as boom up with swing, while the instructor watches for jerky starts and sudden stops.
Track driving. With the orbital running lever, trainees drive forward, reverse and turn around a simulated test-site course. The pitch motion lets them feel the machine tilt as it travels, which teaches them to slow down before uneven ground.
Digging, loading and the exam run. Trainees dig to a line and swing the full bucket to a spoil point, using the continuous rotation to practise smooth slewing. They then rehearse the driving and excavation tests and watch the functional exam video before a final timed attempt.
The machine behind the levers. Maintenance trainees study the electrical side of the same machine type on the excavator electric circuit training simulator. The cut model of planetary gear system shows the planetary reduction found in excavator swing and travel drives.
It builds lever coordination and the order of each task before a trainee climbs into a real cab. The simulator uses joystick levers of the type fitted to real excavators, so the hand movements transfer. Trainees still need supervised seat time on a real machine for the feel of the ground and the site around them.
The listing describes 55-inch Full HD displays in horizontal and vertical types, and no headset is listed. With screens, an instructor standing beside the seat sees the same view as the trainee and can point out what to watch. Confirm the viewing setup when you enquire.
Go through the run with the trainee straight after it ends. Point out jerky lever use, wasted swing movement and spilled loads, then set one clear target for the next attempt. A short written log of each exercise shows progress across the course and tells the instructor when the trainee is ready for a real machine.
Two control patterns are common. In the more widespread one, the left joystick works swing and arm and the right joystick works boom and bucket. The other pattern swaps arm and boom between the hands. Find out which pattern trainees will meet at work, because switching between them later causes mistakes.
Check that the ground is firm and level enough, look for overhead lines and buried services, and decide where the spoil pile will go so it does not slide back into the trench. Keep the machine balanced with the load close in. Trainees can talk through this plan before each digging exercise on the simulator.
A beginner's mistake on the simulator damages nothing and puts no one near a swinging machine. The instructor can repeat the same exercise many times without fuel or machine wear, and stop at any moment to explain. Trainees reach the real excavator already knowing the controls.
To request a quotation, send the product name, code and quantity through our contact page or add the item to your enquiry cart.
Last updated: 20 November 2026