- Physics Lab Equipment
- Chemistry Lab Equipment
- Biology Lab Equipment
- Anatomical Lab Equipment
- Learning
- Educational Lab Equipment
- Magnets
- Agriculture
- Astronomy
- Earth Science
- Geography Lab Equipment
- Safety Lab Coat
- Laboratory
- Meteorological
- Electricity & Magnetism
- Heat
- School Lab Equipment
- Lab Glassware
- Science Lab Equipment
- Tvet Lab Equipment
- Robotics Kits Supplier and Manufacturer for Schools India
- Math Lab Equipment Manufacturers and Exporters in Ambala
- STEM Kits Manufacturers and Supplier India
- Engineering Lab Equipment
- Hospital Lab Equipment
- Water, Sanitation & Hygiene Supplies
- Cold Chain, Solar & Communication Equipment
- Nutrition
Retort Clamp 3 Prongs
Retort Clamp 3 Prongs (Product Code: SLE/RC/03) is a red PVC three-prong clamp used to hold flasks, tubes and similar apparatus on a laboratory stand in school and college practicals. Its span width is set with two regulating screws that adjust independently, and the clamp is 140 mm long with a diameter range listed as 12–100 mm. It is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), an OEM, at its own factory in Ambala, India.
Specifications
| Parameter | Detail |
|---|---|
| Material | PVC, red |
| Prongs | 3 |
| Span adjustment | Span width d independently adjustable by 2 regulating screws |
| Length | 140 mm |
| D/Ø (as listed) | 12–100 mm |
| Product code | SLE/RC/03 |
| Manufacturer | Jain Scientific Equipments Pvt Ltd (ScienceLab) — OEM |
| Country of origin | India (made in Ambala, Haryana) |
What Is the 3 Prong Retort Clamp Used For?
This clamp holds round apparatus such as flasks, test tubes and small columns steady on a retort stand during titration, filtration and demonstration setups. Because each regulating screw adjusts independently, the span can be set so that an off-centre or unevenly shaped item is gripped evenly, and the clamp can sit exactly where the vessel needs support.
The red PVC finish makes the clamp easy to spot on a crowded bench, a small but real help in busy practical classes, and it is an everyday piece of chemistry lab equipment in schools. As a PVC item, it should be kept clear of burner flames and hot plates; for heated work choose a stainless steel clamp instead. Tighten both screws evenly and check the hold before letting go of the vessel.
What to Specify When Ordering
- Quantity — the number of clamps needed per stand or per bench.
- Vessel sizes — share the diameters you need to hold so we can confirm them against the listed 12–100 mm range.
- Stand parts — add a stand base or other clamps from the list below if you are setting up new stations.
OEM Manufacturer
ScienceLab is the trading name of Jain Scientific Equipments Private Limited, the OEM that makes the Retort Clamp 3 Prongs at its own licensed factory at Saha, Ambala, Haryana, India. The company is a registered MSME enterprise (Udyam UDYAM-HR-01-0003714) and handles export shipments under Importer-Exporter Code AAECJ8618A issued by DGFT. Schools, colleges, distributors and importers in India and international markets therefore buy from the maker itself, with quotations and repeat orders handled at source. See the ScienceLab company profile for more.
Related Retort Clamps
Other clamps and stand parts that suit the same practical setups:
- Three Prong Swivel Clamp — a three-prong design whose head can be angled.
- Retort Clamp Three Finger — another three-finger clamp for general stand work.
- 3 Finger Clamps With Shaft — a chromium-plated option with PVC-coated fingers.
- Universal Clamp — for items that do not suit a prong-type grip.
- A-Shape Retort Stand Base — a stable base for the support rod.
All clamp styles are listed in the Retort Clamp category.
Frequently Asked Questions
What is the Retort Clamp 3 Prongs made of?
The Retort Clamp 3 Prongs (SLE/RC/03) is listed in red PVC. Because PVC softens with heat, keep this clamp away from burner flames and hot plates, and choose a stainless steel clamp for heated setups.
How is the span of the Retort Clamp 3 Prongs adjusted?
The span width of the Retort Clamp 3 Prongs is set with 2 regulating screws that adjust independently, so the grip can be centred on the vessel or offset where a setup needs it. Tighten both evenly before releasing the apparatus.
What size of apparatus does the Retort Clamp 3 Prongs hold?
The Retort Clamp 3 Prongs is 140 mm long and is listed with a D/Ø range of 12–100 mm. To confirm that a particular flask or tube will fit, send its diameter through the contact page before ordering.
Who manufactures the Retort Clamp 3 Prongs?
The Retort Clamp 3 Prongs is manufactured by Jain Scientific Equipments Pvt Ltd (ScienceLab), the OEM, at its own licensed factory at Saha, Ambala, Haryana, India. Quotations and repeat orders come straight from the manufacturer.
Is the Retort Clamp 3 Prongs suitable for school labs?
Yes, the Retort Clamp 3 Prongs suits school and college practicals such as titration and filtration setups where no direct heat is applied. Its red PVC finish is easy to spot on shared benches, and its two screws make adjustment simple for students.
Can the Retort Clamp 3 Prongs be supplied for export?
Yes, ScienceLab supplies the Retort Clamp 3 Prongs to buyers in India and international markets. Share the quantity, destination and any matching stand parts through the contact page, and the manufacturer will quote for the complete consignment.
Request a Quote
For a price on the Retort Clamp 3 Prongs, use the contact page or place it in the enquiry cart with other stand parts. Quotes come straight from ScienceLab as the manufacturer, whether for one lab or a dealer's stock.
Last updated: 24 September 2026
